diff options
Diffstat (limited to 'drivers/ide')
46 files changed, 2060 insertions, 1876 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e072903b12f..640c9920724 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -56,8 +56,12 @@ if IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_XFER_MODE + bool + config IDE_TIMINGS bool + select IDE_XFER_MODE config IDE_ATAPI bool @@ -698,6 +702,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 + select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA @@ -721,6 +726,11 @@ config BLK_DEV_IDE_TX4939 depends on SOC_TX4939 select BLK_DEV_IDEDMA_SFF +config BLK_DEV_IDE_AT91 + tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support" + depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40 + select IDE_TIMINGS + config IDE_ARM tristate "ARM IDE support" depends on ARM && (ARCH_RPC || ARCH_SHARK) @@ -866,6 +876,7 @@ config BLK_DEV_ALI14XX config BLK_DEV_DTC2278 tristate "DTC-2278 support" + select IDE_XFER_MODE select IDE_LEGACY help This driver is enabled at runtime using the "dtc2278.probe" kernel @@ -897,6 +908,7 @@ config BLK_DEV_QD65XX config BLK_DEV_UMC8672 tristate "UMC-8672 support" + select IDE_XFER_MODE select IDE_LEGACY help This driver is enabled at runtime using the "umc8672.probe" kernel @@ -910,5 +922,6 @@ endif config BLK_DEV_IDEDMA def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + select IDE_XFER_MODE endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index d0e3d7d5b46..9b4bbe1cdc1 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -5,9 +5,11 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ - ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o ide-sysfs.o + ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \ + ide-io-std.o ide-eh.o # core IDE code +ide-core-$(CONFIG_IDE_XFER_MODE) += ide-pio-blacklist.o ide-xfer-mode.o ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o @@ -116,3 +118,4 @@ obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o +obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c index 4485b9c6f0e..878f8ec6dbe 100644 --- a/drivers/ide/aec62xx.c +++ b/drivers/ide/aec62xx.c @@ -139,7 +139,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); } -static unsigned int init_chipset_aec62xx(struct pci_dev *dev) +static int init_chipset_aec62xx(struct pci_dev *dev) { /* These are necessary to get AEC6280 Macintosh cards to work */ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || @@ -156,7 +156,7 @@ static unsigned int init_chipset_aec62xx(struct pci_dev *dev) pci_write_config_byte(dev, 0x4a, reg4ah | 0x80); } - return dev->irq; + return 0; } static u8 atp86x_cable_detect(ide_hwif_t *hwif) diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 66f43083408..d3513b6b853 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -212,7 +212,7 @@ static int ali15x3_dma_setup(ide_drive_t *drive) * appropriate also sets up the 1533 southbridge. */ -static unsigned int init_chipset_ali15x3(struct pci_dev *dev) +static int init_chipset_ali15x3(struct pci_dev *dev) { unsigned long flags; u8 tmpbyte; diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 77267c85996..628cd2e5fed 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -140,7 +140,7 @@ static void amd7411_cable_detect(struct pci_dev *dev) * The initialization callback. Initialize drive independent registers. */ -static unsigned int init_chipset_amd74xx(struct pci_dev *dev) +static int init_chipset_amd74xx(struct pci_dev *dev) { u8 t = 0, offset = amd_offset(dev); @@ -172,7 +172,7 @@ static unsigned int init_chipset_amd74xx(struct pci_dev *dev) t |= 0xf0; pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t); - return dev->irq; + return 0; } static u8 amd_cable_detect(ide_hwif_t *hwif) @@ -183,14 +183,6 @@ static u8 amd_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - if (hwif->irq == 0) /* 0 is bogus but will do for now */ - hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); -} - static const struct ide_port_ops amd_port_ops = { .set_pio_mode = amd_set_pio_mode, .set_dma_mode = amd_set_drive, @@ -207,7 +199,6 @@ static const struct ide_port_ops amd_port_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_amd74xx, \ - .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ @@ -221,7 +212,6 @@ static const struct ide_port_ops amd_port_ops = { { \ .name = DRV_NAME, \ .init_chipset = init_chipset_amd74xx, \ - .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c new file mode 100644 index 00000000000..1bb50f46388 --- /dev/null +++ b/drivers/ide/at91_ide.c @@ -0,0 +1,467 @@ +/* + * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller + * with Compact Flash True IDE logic + * + * Copyright (c) 2008, 2009 Kelvatek Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/ide.h> +#include <linux/platform_device.h> + +#include <mach/board.h> +#include <mach/gpio.h> +#include <mach/at91sam9263.h> +#include <mach/at91sam9_smc.h> +#include <mach/at91sam9263_matrix.h> + +#define DRV_NAME "at91_ide" + +#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args) +#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args) + +/* + * Access to IDE device is possible through EBI Static Memory Controller + * with Compact Flash logic. For details see EBI and SMC datasheet sections + * of any microcontroller from AT91SAM9 family. + * + * Within SMC chip select address space, lines A[23:21] distinguish Compact + * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are: + * 0x00c0000 - True IDE + * 0x00e0000 - Alternate True IDE (Alt Status Register) + * + * On True IDE mode Task File and Data Register are mapped at the same address. + * To distinguish access between these two different bus data width is used: + * 8Bit for Task File, 16Bit for Data I/O. + * + * After initialization we do 8/16 bit flipping (changes in SMC MODE register) + * only inside IDE callback routines which are serialized by IDE layer, + * so no additional locking needed. + */ + +#define TASK_FILE 0x00c00000 +#define ALT_MODE 0x00e00000 +#define REGS_SIZE 8 + +#define enter_16bit(cs, mode) do { \ + mode = at91_sys_read(AT91_SMC_MODE(cs)); \ + at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \ +} while (0) + +#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode); + +static void set_smc_timings(const u8 chipselect, const u16 cycle, + const u16 setup, const u16 pulse, + const u16 data_float, int use_iordy) +{ + unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_BAT_SELECT; + + /* disable or enable waiting for IORDY signal */ + if (use_iordy) + mode |= AT91_SMC_EXNWMODE_READY; + + /* add data float cycles if needed */ + if (data_float) + mode |= AT91_SMC_TDF_(data_float); + + at91_sys_write(AT91_SMC_MODE(chipselect), mode); + + /* setup timings in SMC */ + at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) | + AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(setup) | + AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) | + AT91_SMC_NCS_WRPULSE_(cycle) | + AT91_SMC_NRDPULSE_(pulse) | + AT91_SMC_NCS_RDPULSE_(cycle)); + at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) | + AT91_SMC_NRDCYCLE_(cycle)); +} + +static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) +{ + u64 tmp = ns; + + tmp *= mck_hz; + tmp += 1000*1000*1000 - 1; /* round up */ + do_div(tmp, 1000*1000*1000); + return (unsigned int) tmp; +} + +static void apply_timings(const u8 chipselect, const u8 pio, + const struct ide_timing *timing, int use_iordy) +{ + unsigned int t0, t1, t2, t6z; + unsigned int cycle, setup, pulse, data_float; + unsigned int mck_hz; + struct clk *mck; + + /* see table 22 of Compact Flash standard 4.1 for the meaning, + * we do not stretch active (t2) time, so setup (t1) + hold time (th) + * assure at least minimal recovery (t2i) time */ + t0 = timing->cyc8b; + t1 = timing->setup; + t2 = timing->act8b; + t6z = (pio < 5) ? 30 : 20; + + pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z); + + mck = clk_get(NULL, "mck"); + BUG_ON(IS_ERR(mck)); + mck_hz = clk_get_rate(mck); + pdbg("mck_hz=%u\n", mck_hz); + + cycle = calc_mck_cycles(t0, mck_hz); + setup = calc_mck_cycles(t1, mck_hz); + pulse = calc_mck_cycles(t2, mck_hz); + data_float = calc_mck_cycles(t6z, mck_hz); + + pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n", + cycle, setup, pulse, data_float); + + set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy); +} + +static void at91_ide_input_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 chipselect = hwif->select_data; + unsigned long mode; + + pdbg("cs %u buf %p len %d\n", chipselect, buf, len); + + len++; + + enter_16bit(chipselect, mode); + __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2); + leave_16bit(chipselect, mode); +} + +static void at91_ide_output_data(ide_drive_t *drive, struct request *rq, + void *buf, unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + u8 chipselect = hwif->select_data; + unsigned long mode; + + pdbg("cs %u buf %p len %d\n", chipselect, buf, len); + + enter_16bit(chipselect, mode); + __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2); + leave_16bit(chipselect, mode); +} + +static u8 ide_mm_inb(unsigned long port) +{ + return readb((void __iomem *) port); +} + +static void ide_mm_outb(u8 value, unsigned long port) +{ + writeb(value, (void __iomem *) port); +} + +static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) { + u16 data = (tf->hob_data << 8) | tf->data; + + at91_ide_output_data(drive, NULL, &data, 2); + } + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + ide_mm_outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + ide_mm_outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + ide_mm_outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + ide_mm_outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + ide_mm_outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + ide_mm_outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr); +} + +static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data; + + at91_ide_input_data(drive, NULL, &data, 2); + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_FEATURE) + tf->feature = ide_mm_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = ide_mm_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = ide_mm_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = ide_mm_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = ide_mm_inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = ide_mm_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = ide_mm_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr); + } +} + +static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + struct ide_timing *timing; + u8 chipselect = drive->hwif->select_data; + int use_iordy = 0; + + pdbg("chipselect %u pio %u\n", chipselect, pio); + + timing = ide_timing_find_mode(XFER_PIO_0 + pio); + BUG_ON(!timing); + + if ((pio > 2 || ata_id_has_iordy(drive->id)) && + !(ata_id_is_cfa(drive->id) && pio > 4)) + use_iordy = 1; + + apply_timings(chipselect, pio, timing, use_iordy); +} + +static const struct ide_tp_ops at91_ide_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .set_irq = ide_set_irq, + + .tf_load = at91_ide_tf_load, + .tf_read = at91_ide_tf_read, + + .input_data = at91_ide_input_data, + .output_data = at91_ide_output_data, +}; + +static const struct ide_port_ops at91_ide_port_ops = { + .set_pio_mode = at91_ide_set_pio_mode, +}; + +static const struct ide_port_info at91_ide_port_info __initdata = { + .port_ops = &at91_ide_port_ops, + .tp_ops = &at91_ide_tp_ops, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE | + IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO5, +}; + +/* + * If interrupt is delivered through GPIO, IRQ are triggered on falling + * and rising edge of signal. Whereas IDE device request interrupt on high + * level (rising edge in our case). This mean we have fake interrupts, so + * we need to check interrupt pin and exit instantly from ISR when line + * is on low level. + */ + +irqreturn_t at91_irq_handler(int irq, void *dev_id) +{ + int ntries = 8; + int pin_val1, pin_val2; + + /* additional deglitch, line can be noisy in badly designed PCB */ + do { + pin_val1 = at91_get_gpio_value(irq); + pin_val2 = at91_get_gpio_value(irq); + } while (pin_val1 != pin_val2 && --ntries > 0); + + if (pin_val1 == 0 || ntries <= 0) + return IRQ_HANDLED; + + return ide_intr(irq, dev_id); +} + +static int __init at91_ide_probe(struct platform_device *pdev) +{ + int ret; + hw_regs_t hw; + hw_regs_t *hws[] = { &hw, NULL, NULL, NULL }; + struct ide_host *host; + struct resource *res; + unsigned long tf_base = 0, ctl_base = 0; + struct at91_cf_data *board = pdev->dev.platform_data; + + if (!board) + return -ENODEV; + + if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) { + perr("no device detected\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + perr("can't get memory resource\n"); + return -ENODEV; + } + + if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE, + REGS_SIZE, "ide") || + !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE, + REGS_SIZE, "alt")) { + perr("memory resources in use\n"); + return -EBUSY; + } + + pdbg("chipselect %u irq %u res %08lx\n", board->chipselect, + board->irq_pin, (unsigned long) res->start); + + tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE, + REGS_SIZE); + ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE, + REGS_SIZE); + if (!tf_base || !ctl_base) { + perr("can't map memory regions\n"); + return -EBUSY; + } + + memset(&hw, 0, sizeof(hw)); + + if (board->flags & AT91_IDE_SWAP_A0_A2) { + /* workaround for stupid hardware bug */ + hw.io_ports.data_addr = tf_base + 0; + hw.io_ports.error_addr = tf_base + 4; + hw.io_ports.nsect_addr = tf_base + 2; + hw.io_ports.lbal_addr = tf_base + 6; + hw.io_ports.lbam_addr = tf_base + 1; + hw.io_ports.lbah_addr = tf_base + 5; + hw.io_ports.device_addr = tf_base + 3; + hw.io_ports.command_addr = tf_base + 7; + hw.io_ports.ctl_addr = ctl_base + 3; + } else + ide_std_init_ports(&hw, tf_base, ctl_base + 6); + + hw.irq = board->irq_pin; + hw.chipset = ide_generic; + hw.dev = &pdev->dev; + + host = ide_host_alloc(&at91_ide_port_info, hws); + if (!host) { + perr("failed to allocate ide host\n"); + return -ENOMEM; + } + + /* setup Static Memory Controller - PIO 0 as default */ + apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0); + + /* with GPIO interrupt we have to do quirks in handler */ + if (board->irq_pin >= PIN_BASE) + host->irq_handler = at91_irq_handler; + + host->ports[0]->select_data = board->chipselect; + + ret = ide_host_register(host, &at91_ide_port_info, hws); + if (ret) { + perr("failed to register ide host\n"); + goto err_free_host; + } + platform_set_drvdata(pdev, host); + return 0; + +err_free_host: + ide_host_free(host); + return ret; +} + +static int __exit at91_ide_remove(struct platform_device *pdev) +{ + struct ide_host *host = platform_get_drvdata(pdev); + + ide_host_remove(host); + return 0; +} + +static struct platform_driver at91_ide_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .remove = __exit_p(at91_ide_remove), +}; + +static int __init at91_ide_init(void) +{ + return platform_driver_probe(&at91_ide_driver, at91_ide_probe); +} + +static void __exit at91_ide_exit(void) +{ + platform_driver_unregister(&at91_ide_driver); +} + +module_init(at91_ide_init); +module_exit(at91_ide_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>"); + diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index ecd1e62ca91..923cbfe259d 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c @@ -142,7 +142,6 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { .name = DRV_NAME, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, .port_ops = &atiixp_port_ops, - .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -151,7 +150,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = { .name = DRV_NAME, .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, .port_ops = &atiixp_port_ops, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 79a2dfed8eb..154ec2cf734 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -536,9 +536,8 @@ static const struct ide_port_info au1xxx_port_info = { #endif }; -static int au_ide_probe(struct device *dev) +static int au_ide_probe(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); _auide_hwif *ahwif = &auide_hwif; struct resource *res; struct ide_host *host; @@ -552,23 +551,23 @@ static int au_ide_probe(struct device *dev) #endif memset(&auide_hwif, 0, sizeof(_auide_hwif)); - ahwif->irq = platform_get_irq(pdev, 0); + ahwif->irq = platform_get_irq(dev, 0); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (res == NULL) { - pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id); + pr_debug("%s %d: no base address\n", DRV_NAME, dev->id); ret = -ENODEV; goto out; } if (ahwif->irq < 0) { - pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id); + pr_debug("%s %d: no IRQ\n", DRV_NAME, dev->id); ret = -ENODEV; goto out; } if (!request_mem_region(res->start, res->end - res->start + 1, - pdev->name)) { + dev->name)) { pr_debug("%s: request_mem_region failed\n", DRV_NAME); ret = -EBUSY; goto out; @@ -583,7 +582,7 @@ static int au_ide_probe(struct device *dev) memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); hw.irq = ahwif->irq; - hw.dev = dev; + hw.dev = &dev->dev; hw.chipset = ide_au1xxx; ret = ide_host_add(&au1xxx_port_info, hws, &host); @@ -592,7 +591,7 @@ static int au_ide_probe(struct device *dev) auide_hwif.hwif = host->ports[0]; - dev_set_drvdata(dev, host); + platform_set_drvdata(dev, host); printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); @@ -600,38 +599,39 @@ static int au_ide_probe(struct device *dev) return ret; } -static int au_ide_remove(struct device *dev) +static int au_ide_remove(struct platform_device *dev) { - struct platform_device *pdev = to_platform_device(dev); struct resource *res; - struct ide_host *host = dev_get_drvdata(dev); + struct ide_host *host = platform_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; ide_host_remove(host); iounmap((void *)ahwif->regbase); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); release_mem_region(res->start, res->end - res->start + 1); return 0; } -static struct device_driver au1200_ide_driver = { - .name = "au1200-ide", - .bus = &platform_bus_type, +static struct platform_driver au1200_ide_driver = { + .driver = { + .name = "au1200-ide", + .owner = THIS_MODULE, + }, .probe = au_ide_probe, .remove = au_ide_remove, }; static int __init au_ide_init(void) { - return driver_register(&au1200_ide_driver); + return platform_driver_register(&au1200_ide_driver); } static void __exit au_ide_exit(void) { - driver_unregister(&au1200_ide_driver); + platform_driver_unregister(&au1200_ide_driver); } MODULE_LICENSE("GPL"); diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index 2f9688d87ec..aeee036b150 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -333,7 +333,7 @@ static int cmd646_1_dma_end(ide_drive_t *drive) return (dma_stat & 7) != 4; } -static unsigned int init_chipset_cmd64x(struct pci_dev *dev) +static int init_chipset_cmd64x(struct pci_dev *dev) { u8 mrdmode = 0; diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index d003bec56ff..58fb90e5b76 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -133,7 +133,8 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic * do all the device setup for us */ - ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]); + ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); + hw[0].irq = 14; return ide_host_add(d, hws, NULL); } diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index d8ede85fe17..8e8b35a8990 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c @@ -135,7 +135,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) * Initialize the cs5530 bridge for reliable IDE DMA operation. */ -static unsigned int init_chipset_cs5530(struct pci_dev *dev) +static int init_chipset_cs5530(struct pci_dev *dev) { struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; diff --git a/drivers/ide/delkin_cb.c b/drivers/ide/delkin_cb.c index 8f1b2d9f051..bacb1194c9c 100644 --- a/drivers/ide/delkin_cb.c +++ b/drivers/ide/delkin_cb.c @@ -46,7 +46,7 @@ static const struct ide_port_ops delkin_cb_port_ops = { .quirkproc = ide_undecoded_slave, }; -static unsigned int delkin_cb_init_chipset(struct pci_dev *dev) +static int delkin_cb_init_chipset(struct pci_dev *dev) { unsigned long base = pci_resource_start(dev, 0); int i; diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 3eb9b5c63a0..d3b3e824f44 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -995,7 +995,7 @@ static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr) pci_write_config_byte(dev, mcr_addr + 1, new_mcr); } -static unsigned int init_chipset_hpt366(struct pci_dev *dev) +static int init_chipset_hpt366(struct pci_dev *dev) { unsigned long io_base = pci_resource_start(dev, 4); struct hpt_info *info = hpt3xx_get_info(&dev->dev); @@ -1237,7 +1237,7 @@ static unsigned int init_chipset_hpt366(struct pci_dev *dev) hpt3xx_disable_fast_irq(dev, 0x50); hpt3xx_disable_fast_irq(dev, 0x54); - return dev->irq; + return 0; } static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index ec7d07fa570..5b704f1ea90 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -20,9 +20,6 @@ #include <acpi/acpi_bus.h> #define REGS_PER_GTF 7 -struct taskfile_array { - u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ -}; struct GTM_buffer { u32 PIO_speed0; @@ -89,12 +86,8 @@ static const struct dmi_system_id ide_acpi_dmi_table[] = { { } /* terminate list */ }; -static int ide_acpi_blacklist(void) +int ide_acpi_init(void) { - static int done; - if (done) - return 0; - done = 1; dmi_check_system(ide_acpi_dmi_table); return 0; } @@ -202,40 +195,6 @@ static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) } /** - * ide_acpi_drive_get_handle - Get ACPI object handle for a given drive - * @drive: device to locate - * - * Retrieves the object handle of a given drive. According to the ACPI - * spec the drive is a child of the hwif. - * - * Returns handle on success, 0 on error. - */ -static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - int port; - acpi_handle drive_handle; - - if (!hwif->acpidata) - return NULL; - - if (!hwif->acpidata->obj_handle) - return NULL; - - port = hwif->channel ? drive->dn - 2: drive->dn; - - DEBPRINT("ENTER: %s at channel#: %d port#: %d\n", - drive->name, hwif->channel, port); - - - /* TBD: could also check ACPI object VALID bits */ - drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port); - DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle); - - return drive_handle; -} - -/** * do_drive_get_GTF - get the drive bootup default taskfile settings * @drive: the drive for which the taskfile settings should be retrieved * @gtf_length: number of bytes of _GTF data returned at @gtf_address @@ -257,47 +216,15 @@ static int do_drive_get_GTF(ide_drive_t *drive, acpi_status status; struct acpi_buffer output; union acpi_object *out_obj; - ide_hwif_t *hwif = drive->hwif; - struct device *dev = hwif->gendev.parent; int err = -ENODEV; - int port; *gtf_length = 0; *gtf_address = 0UL; *obj_loc = 0UL; - if (ide_noacpi) - return 0; - - if (!dev) { - DEBPRINT("no PCI device for %s\n", hwif->name); - goto out; - } - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - goto out; - } - - port = hwif->channel ? drive->dn - 2: drive->dn; - - DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", - hwif->name, dev_name(dev), port, hwif->channel); - - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) { - DEBPRINT("%s drive %d:%d not present\n", - hwif->name, hwif->channel, port); - goto out; - } - - /* Get this drive's _ADR info. if not already known. */ if (!drive->acpidata->obj_handle) { - drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive); - if (!drive->acpidata->obj_handle) { - DEBPRINT("No ACPI object found for %s\n", - drive->name); - goto out; - } + DEBPRINT("No ACPI object found for %s\n", drive->name); + goto out; } /* Setting up output buffer */ @@ -355,43 +282,6 @@ out: } /** - * taskfile_load_raw - send taskfile registers to drive - * @drive: drive to which output is sent - * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) - * - * Outputs IDE taskfile to the drive. - */ -static int taskfile_load_raw(ide_drive_t *drive, - const struct taskfile_array *gtf) -{ - ide_task_t args; - int err = 0; - - DEBPRINT("(0x1f1-1f7): hex: " - "%02x %02x %02x %02x %02x %02x %02x\n", - gtf->tfa[0], gtf->tfa[1], gtf->tfa[2], - gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]); - - memset(&args, 0, sizeof(ide_task_t)); - - /* convert gtf to IDE Taskfile */ - memcpy(&args.tf_array[7], >f->tfa, 7); - args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - - if (!ide_acpigtf) { - DEBPRINT("_GTF execution disabled\n"); - return err; - } - - err = ide_no_data_taskfile(drive, &args); - if (err) - printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", - __func__, err); - - return err; -} - -/** * do_drive_set_taskfiles - write the drive taskfile settings from _GTF * @drive: the drive to which the taskfile command should be sent * @gtf_length: total number of bytes of _GTF taskfiles @@ -404,43 +294,41 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, unsigned int gtf_length, unsigned long gtf_address) { - int rc = -ENODEV, err; + int rc = 0, err; int gtf_count = gtf_length / REGS_PER_GTF; int ix; - struct taskfile_array *gtf; - - if (ide_noacpi) - return 0; - - DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn); - - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - goto out; - - if (!gtf_count) /* shouldn't be here */ - goto out; DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n", gtf_length, gtf_length, gtf_count, gtf_address); - if (gtf_length % REGS_PER_GTF) { - printk(KERN_ERR "%s: unexpected GTF length (%d)\n", - __func__, gtf_length); - goto out; - } - - rc = 0; + /* send all taskfile registers (0x1f1-0x1f7) *in*that*order* */ for (ix = 0; ix < gtf_count; ix++) { - gtf = (struct taskfile_array *) - (gtf_address + ix * REGS_PER_GTF); + u8 *gtf = (u8 *)(gtf_address + ix * REGS_PER_GTF); + ide_task_t task; - /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */ - err = taskfile_load_raw(drive, gtf); - if (err) + DEBPRINT("(0x1f1-1f7): " + "hex: %02x %02x %02x %02x %02x %02x %02x\n", + gtf[0], gtf[1], gtf[2], + gtf[3], gtf[4], gtf[5], gtf[6]); + + if (!ide_acpigtf) { + DEBPRINT("_GTF execution disabled\n"); + continue; + } + + /* convert GTF to taskfile */ + memset(&task, 0, sizeof(ide_task_t)); + memcpy(&task.tf_array[7], gtf, REGS_PER_GTF); + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + + err = ide_no_data_taskfile(drive, &task); + if (err) { + printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", + __func__, err); rc = err; + } } -out: return rc; } @@ -647,26 +535,23 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) DEBPRINT("no ACPI data for %s\n", hwif->name); return; } + /* channel first and then drives for power on and verse versa for power off */ if (on) acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0); - ide_port_for_each_dev(i, drive, hwif) { - if (!drive->acpidata->obj_handle) - drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive); - - if (drive->acpidata->obj_handle && - (drive->dev_flags & IDE_DFLAG_PRESENT)) { + ide_port_for_each_present_dev(i, drive, hwif) { + if (drive->acpidata->obj_handle) acpi_bus_set_power(drive->acpidata->obj_handle, - on? ACPI_STATE_D0: ACPI_STATE_D3); - } + on ? ACPI_STATE_D0 : ACPI_STATE_D3); } + if (!on) acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3); } /** - * ide_acpi_init - initialize the ACPI link for an IDE interface + * ide_acpi_init_port - initialize the ACPI link for an IDE interface * @hwif: target IDE interface (channel) * * The ACPI spec is not quite clear when the drive identify buffer @@ -676,10 +561,8 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) * So we get the information during startup; but this means that * any changes during run-time will be lost after resume. */ -void ide_acpi_init(ide_hwif_t *hwif) +void ide_acpi_init_port(ide_hwif_t *hwif) { - ide_acpi_blacklist(); - hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); if (!hwif->acpidata) return; @@ -708,15 +591,24 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) hwif->devices[0]->acpidata = &hwif->acpidata->master; hwif->devices[1]->acpidata = &hwif->acpidata->slave; - /* - * Send IDENTIFY for each drive - */ - ide_port_for_each_dev(i, drive, hwif) { - memset(drive->acpidata, 0, sizeof(*drive->acpidata)); + /* get _ADR info for each device */ + ide_port_for_each_present_dev(i, drive, hwif) { + acpi_handle dev_handle; - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - continue; + DEBPRINT("ENTER: %s at channel#: %d port#: %d\n", + drive->name, hwif->channel, drive->dn & 1); + + /* TBD: could also check ACPI object VALID bits */ + dev_handle = acpi_get_child(hwif->acpidata->obj_handle, + drive->dn & 1); + + DEBPRINT("drive %s handle 0x%p\n", drive->name, dev_handle); + + drive->acpidata->obj_handle = dev_handle; + } + /* send IDENTIFY for each device */ + ide_port_for_each_present_dev(i, drive, hwif) { err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff); if (err) DEBPRINT("identify device %s failed (%d)\n", @@ -736,9 +628,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) ide_acpi_get_timing(hwif); ide_acpi_push_timing(hwif); - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) - /* Execute ACPI startup code */ - ide_acpi_exec_tfs(drive); + ide_port_for_each_present_dev(i, drive, hwif) { + ide_acpi_exec_tfs(drive); } } diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index e96c0126059..6adc5b4a440 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -140,10 +140,19 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *)pc; rq->rq_disk = disk; + + if (pc->req_xfer) { + rq->data = pc->buf; + rq->data_len = pc->req_xfer; + } + memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; - ide_do_drive_cmd(drive, rq); + + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); } /* @@ -159,6 +168,12 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; rq->buffer = (char *)pc; + + if (pc->req_xfer) { + rq->data = pc->buf; + rq->data_len = pc->req_xfer; + } + memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; @@ -285,6 +300,21 @@ int ide_cd_get_xferlen(struct request *rq) } EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); +void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) +{ + ide_task_t task; + + memset(&task, 0, sizeof(task)); + task.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM | + IDE_TFLAG_IN_NSECT; + + drive->hwif->tp_ops->tf_read(drive, &task); + + *bcount = (task.tf.lbah << 8) | task.tf.lbam; + *ireason = task.tf.nsect & 3; +} +EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); + /* * This is the usual interrupt handler which will be called during a packet * command. We will transfer some of the data (as requested by the drive) @@ -444,6 +474,25 @@ next_irq: return ide_started; } +static void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount) +{ + ide_hwif_t *hwif = drive->hwif; + ide_task_t task; + u8 dma = drive->dma; + + memset(&task, 0, sizeof(task)); + task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | + IDE_TFLAG_OUT_FEATURE | tf_flags; + task.tf.feature = dma; /* Use PIO/DMA */ + task.tf.lbam = bcount & 0xff; + task.tf.lbah = (bcount >> 8) & 0xff; + + ide_tf_dump(drive->name, &task.tf); + hwif->tp_ops->set_irq(hwif, 1); + SELECT_MASK(drive, 0); + hwif->tp_ops->tf_load(drive, &task); +} + static u8 ide_read_ireason(ide_drive_t *drive) { ide_task_t task; @@ -617,7 +666,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive) : WAIT_TAPE_CMD; } - ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma); + ide_pktcmd_tf_load(drive, tf_flags, bcount); /* Issue the packet command */ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ddfbea41d29..2177cd11664 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -242,7 +242,9 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x\n", failed_command->cmd[0]); - ide_do_drive_cmd(drive, rq); + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); } static void cdrom_end_request(ide_drive_t *drive, int uptodate) diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c new file mode 100644 index 00000000000..7c3953414d4 --- /dev/null +++ b/drivers/ide/ide-devsets.c @@ -0,0 +1,190 @@ + +#include <linux/kernel.h> +#include <linux/ide.h> + +DEFINE_MUTEX(ide_setting_mtx); + +ide_devset_get(io_32bit, io_32bit); + +static int set_io_32bit(ide_drive_t *drive, int arg) +{ + if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) + return -EPERM; + + if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) + return -EINVAL; + + drive->io_32bit = arg; + + return 0; +} + +ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS); + +static int set_ksettings(ide_drive_t *drive, int arg) +{ + if (arg < 0 || arg > 1) + return -EINVAL; + + if (arg) + drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS; + else + drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS; + + return 0; +} + +ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA); + +static int set_using_dma(ide_drive_t *drive, int arg) +{ +#ifdef CONFIG_BLK_DEV_IDEDMA + int err = -EPERM; + + if (arg < 0 || arg > 1) + return -EINVAL; + + if (ata_id_has_dma(drive->id) == 0) + goto out; + + if (drive->hwif->dma_ops == NULL) + goto out; + + err = 0; + + if (arg) { + if (ide_set_dma(drive)) + err = -EIO; + } else + ide_dma_off(drive); + +out: + return err; +#else + if (arg < 0 || arg > 1) + return -EINVAL; + + return -EPERM; +#endif +} + +/* + * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away + */ +static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) +{ + switch (req_pio) { + case 202: + case 201: + case 200: + case 102: + case 101: + case 100: + return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0; + case 9: + case 8: + return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0; + case 7: + case 6: + return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0; + default: + return 0; + } +} + +static int set_pio_mode(ide_drive_t *drive, int arg) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (arg < 0 || arg > 255) + return -EINVAL; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return -ENOSYS; + + if (set_pio_mode_abuse(drive->hwif, arg)) { + if (arg == 8 || arg == 9) { + unsigned long flags; + + /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ + spin_lock_irqsave(&hwif->lock, flags); + port_ops->set_pio_mode(drive, arg); + spin_unlock_irqrestore(&hwif->lock, flags); + } else + port_ops->set_pio_mode(drive, arg); + } else { + int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); + + ide_set_pio(drive, arg); + + if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { + if (keep_dma) + ide_dma_on(drive); + } + } + + return 0; +} + +ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK); + +static int set_unmaskirq(ide_drive_t *drive, int arg) +{ + if (drive->dev_flags & IDE_DFLAG_NO_UNMASK) + return -EPERM; + + if (arg < 0 || arg > 1) + return -EINVAL; + + if (arg) + drive->dev_flags |= IDE_DFLAG_UNMASK; + else + drive->dev_flags &= ~IDE_DFLAG_UNMASK; + + return 0; +} + +ide_ext_devset_rw_sync(io_32bit, io_32bit); +ide_ext_devset_rw_sync(keepsettings, ksettings); +ide_ext_devset_rw_sync(unmaskirq, unmaskirq); +ide_ext_devset_rw_sync(using_dma, using_dma); +__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode); + +int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, + int arg) +{ + struct request_queue *q = drive->queue; + struct request *rq; + int ret = 0; + + if (!(setting->flags & DS_SYNC)) + return setting->set(drive, arg); + + rq = blk_get_request(q, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 5; + rq->cmd[0] = REQ_DEVSET_EXEC; + *(int *)&rq->cmd[1] = arg; + rq->special = setting->set; + + if (blk_execute_rq(q, NULL, rq, 0)) + ret = rq->errors; + blk_put_request(rq); + + return ret; +} + +ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq) +{ + int err, (*setfunc)(ide_drive_t *, int) = rq->special; + + err = setfunc(drive, *(int *)&rq->cmd[1]); + if (err) + rq->errors = err; + else + err = 1; + ide_end_request(drive, err, 0); + return ide_stopped; +} diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index 1146f4204c6..1f86dcbd2b1 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -125,5 +125,5 @@ const struct ide_proc_devset ide_disk_settings[] = { IDE_PROC_DEVSET(multcount, 0, 16), IDE_PROC_DEVSET(nowerr, 0, 1), IDE_PROC_DEVSET(wcache, 0, 1), - { 0 }, + { NULL }, }; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 72ebab0bc75..a878f4734f8 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -128,6 +128,7 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; + int i; ide_map_sg(drive, rq); @@ -136,8 +137,13 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq) else hwif->sg_dma_direction = DMA_TO_DEVICE; - return dma_map_sg(hwif->dev, sg, hwif->sg_nents, - hwif->sg_dma_direction); + i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction); + if (i) { + hwif->orig_sg_nents = hwif->sg_nents; + hwif->sg_nents = i; + } + + return i; } EXPORT_SYMBOL_GPL(ide_build_sglist); @@ -156,7 +162,7 @@ void ide_destroy_dmatable(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; - dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents, + dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents, hwif->sg_dma_direction); } EXPORT_SYMBOL_GPL(ide_destroy_dmatable); @@ -464,6 +470,63 @@ void ide_dma_timeout(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_dma_timeout); +/* + * un-busy the port etc, and clear any pending DMA status. we want to + * retry the current request in pio mode instead of risking tossing it + * all away + */ +ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) +{ + ide_hwif_t *hwif = drive->hwif; + struct request *rq; + ide_startstop_t ret = ide_stopped; + + /* + * end current dma transaction + */ + + if (error < 0) { + printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); + (void)hwif->dma_ops->dma_end(drive); + ret = ide_error(drive, "dma timeout error", + hwif->tp_ops->read_status(hwif)); + } else { + printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); + hwif->dma_ops->dma_timeout(drive); + } + + /* + * disable dma for now, but remember that we did so because of + * a timeout -- we'll reenable after we finish this next request + * (or rather the first chunk of it) in pio. + */ + drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY; + drive->retry_pio++; + ide_dma_off_quietly(drive); + + /* + * un-busy drive etc and make sure request is sane + */ + + rq = hwif->rq; + if (!rq) + goto out; + + hwif->rq = NULL; + + rq->errors = 0; + + if (!rq->bio) + goto out; + + rq->sector = rq->bio->bi_sector; + rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; + rq->hard_cur_sectors = rq->current_nr_sectors; + rq->buffer = bio_data(rq->bio); +out: + return ret; +} + void ide_release_dma_engine(ide_hwif_t *hwif) { if (hwif->dmatable_cpu) { diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c new file mode 100644 index 00000000000..1231b5e486f --- /dev/null +++ b/drivers/ide/ide-eh.c @@ -0,0 +1,428 @@ + +#include <linux/kernel.h> +#include <linux/ide.h> +#include <linux/delay.h> + +static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + ide_hwif_t *hwif = drive->hwif; + + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { + /* other bits are useless when BUSY */ + rq->errors |= ERROR_RESET; + } else if (stat & ATA_ERR) { + /* err has different meaning on cdrom and tape */ + if (err == ATA_ABORTED) { + if ((drive->dev_flags & IDE_DFLAG_LBA) && + /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ + hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) + return ide_stopped; + } else if ((err & BAD_CRC) == BAD_CRC) { + /* UDMA crc error, just retry the operation */ + drive->crc_count++; + } else if (err & (ATA_BBK | ATA_UNC)) { + /* retries won't help these */ + rq->errors = ERROR_MAX; + } else if (err & ATA_TRK0NF) { + /* help it find track zero */ + rq->errors |= ERROR_RECAL; + } + } + + if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && + (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { + int nsect = drive->mult_count ? drive->mult_count : 1; + + ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); + } + + if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { + ide_kill_rq(drive, rq); + return ide_stopped; + } + + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) + rq->errors |= ERROR_RESET; + + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { + ++rq->errors; + return ide_do_reset(drive); + } + + if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) + drive->special.b.recalibrate = 1; + + ++rq->errors; + + return ide_stopped; +} + +static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + ide_hwif_t *hwif = drive->hwif; + + if ((stat & ATA_BUSY) || + ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { + /* other bits are useless when BUSY */ + rq->errors |= ERROR_RESET; + } else { + /* add decoding error stuff */ + } + + if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) + /* force an abort */ + hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); + + if (rq->errors >= ERROR_MAX) { + ide_kill_rq(drive, rq); + } else { + if ((rq->errors & ERROR_RESET) == ERROR_RESET) { + ++rq->errors; + return ide_do_reset(drive); + } + ++rq->errors; + } + + return ide_stopped; +} + +static ide_startstop_t __ide_error(ide_drive_t *drive, struct request *rq, + u8 stat, u8 err) +{ + if (drive->media == ide_disk) + return ide_ata_error(drive, rq, stat, err); + return ide_atapi_error(drive, rq, stat, err); +} + +/** + * ide_error - handle an error on the IDE + * @drive: drive the error occurred on + * @msg: message to report + * @stat: status bits + * + * ide_error() takes action based on the error returned by the drive. + * For normal I/O that may well include retries. We deal with + * both new-style (taskfile) and old style command handling here. + * In the case of taskfile command handling there is work left to + * do + */ + +ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat) +{ + struct request *rq; + u8 err; + + err = ide_dump_status(drive, msg, stat); + + rq = drive->hwif->rq; + if (rq == NULL) + return ide_stopped; + + /* retry only "normal" I/O: */ + if (!blk_fs_request(rq)) { + rq->errors = 1; + ide_end_drive_cmd(drive, stat, err); + return ide_stopped; + } + + return __ide_error(drive, rq, stat, err); +} +EXPORT_SYMBOL_GPL(ide_error); + +static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) +{ + struct request *rq = drive->hwif->rq; + + if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) + ide_end_request(drive, err ? err : 1, 0); +} + +/* needed below */ +static ide_startstop_t do_reset1(ide_drive_t *, int); + +/* + * atapi_reset_pollfunc() gets invoked to poll the interface for completion + * every 50ms during an atapi drive reset operation. If the drive has not yet + * responded, and we have not yet hit our maximum waiting time, then the timer + * is restarted for another 50ms. + */ +static ide_startstop_t atapi_reset_pollfunc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 stat; + + SELECT_DRIVE(drive); + udelay(10); + stat = hwif->tp_ops->read_status(hwif); + + if (OK_STAT(stat, 0, ATA_BUSY)) + printk(KERN_INFO "%s: ATAPI reset complete\n", drive->name); + else { + if (time_before(jiffies, hwif->poll_timeout)) { + ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, + NULL); + /* continue polling */ + return ide_started; + } + /* end of polling */ + hwif->polling = 0; + printk(KERN_ERR "%s: ATAPI reset timed-out, status=0x%02x\n", + drive->name, stat); + /* do it the old fashioned way */ + return do_reset1(drive, 1); + } + /* done polling */ + hwif->polling = 0; + ide_complete_drive_reset(drive, 0); + return ide_stopped; +} + +static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) +{ + static const char *err_master_vals[] = + { NULL, "passed", "formatter device error", + "sector buffer error", "ECC circuitry error", + "controlling MPU error" }; + + u8 err_master = err & 0x7f; + + printk(KERN_ERR "%s: reset: master: ", hwif->name); + if (err_master && err_master < 6) + printk(KERN_CONT "%s", err_master_vals[err_master]); + else + printk(KERN_CONT "error (0x%02x?)", err); + if (err & 0x80) + printk(KERN_CONT "; slave: failed"); + printk(KERN_CONT "\n"); +} + +/* + * reset_pollfunc() gets invoked to poll the interface for completion every 50ms + * during an ide reset operation. If the drives have not yet responded, + * and we have not yet hit our maximum waiting time, then the timer is restarted + * for another 50ms. + */ +static ide_startstop_t reset_pollfunc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + u8 tmp; + int err = 0; + + if (port_ops && port_ops->reset_poll) { + err = port_ops->reset_poll(drive); + if (err) { + printk(KERN_ERR "%s: host reset_poll failure for %s.\n", + hwif->name, drive->name); + goto out; + } + } + + tmp = hwif->tp_ops->read_status(hwif); + + if (!OK_STAT(tmp, 0, ATA_BUSY)) { + if (time_before(jiffies, hwif->poll_timeout)) { + ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); + /* continue polling */ + return ide_started; + } + printk(KERN_ERR "%s: reset timed-out, status=0x%02x\n", + hwif->name, tmp); + drive->failures++; + err = -EIO; + } else { + tmp = ide_read_error(drive); + + if (tmp == 1) { + printk(KERN_INFO "%s: reset: success\n", hwif->name); + drive->failures = 0; + } else { + ide_reset_report_error(hwif, tmp); + drive->failures++; + err = -EIO; + } + } +out: + hwif->polling = 0; /* done polling */ + ide_complete_drive_reset(drive, err); + return ide_stopped; +} + +static void ide_disk_pre_reset(ide_drive_t *drive) +{ + int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; + + drive->special.all = 0; + drive->special.b.set_geometry = legacy; + drive->special.b.recalibrate = legacy; + + drive->mult_count = 0; + drive->dev_flags &= ~IDE_DFLAG_PARKED; + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && + (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) + drive->mult_req = 0; + + if (drive->mult_req != drive->mult_count) + drive->special.b.set_multmode = 1; +} + +static void pre_reset(ide_drive_t *drive) +{ + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + + if (drive->media == ide_disk) + ide_disk_pre_reset(drive); + else + drive->dev_flags |= IDE_DFLAG_POST_RESET; + + if (drive->dev_flags & IDE_DFLAG_USING_DMA) { + if (drive->crc_count) + ide_check_dma_crc(drive); + else + ide_dma_off(drive); + } + + if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { + if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { + drive->dev_flags &= ~IDE_DFLAG_UNMASK; + drive->io_32bit = 0; + } + return; + } + + if (port_ops && port_ops->pre_reset) + port_ops->pre_reset(drive); + + if (drive->current_speed != 0xff) + drive->desired_speed = drive->current_speed; + drive->current_speed = 0xff; +} + +/* + * do_reset1() attempts to recover a confused drive by resetting it. + * Unfortunately, resetting a disk drive actually resets all devices on + * the same interface, so it can really be thought of as resetting the + * interface rather than resetting the drive. + * + * ATAPI devices have their own reset mechanism which allows them to be + * individually reset without clobbering other devices on the same interface. + * + * Unfortunately, the IDE interface does not generate an interrupt to let + * us know when the reset operation has finished, so we must poll for this. + * Equally poor, though, is the fact that this may a very long time to complete, + * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, + * we set a timer to poll at 50ms intervals. + */ +static ide_startstop_t do_reset1(ide_drive_t *drive, int do_not_try_atapi) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + const struct ide_tp_ops *tp_ops = hwif->tp_ops; + const struct ide_port_ops *port_ops; + ide_drive_t *tdrive; + unsigned long flags, timeout; + int i; + DEFINE_WAIT(wait); + + spin_lock_irqsave(&hwif->lock, flags); + + /* We must not reset with running handlers */ + BUG_ON(hwif->handler != NULL); + + /* For an ATAPI device, first try an ATAPI SRST. */ + if (drive->media != ide_disk && !do_not_try_atapi) { + pre_reset(drive); + SELECT_DRIVE(drive); + udelay(20); + tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); + ndelay(400); + hwif->poll_timeout = jiffies + WAIT_WORSTCASE; + hwif->polling = 1; + __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); + spin_unlock_irqrestore(&hwif->lock, flags); + return ide_started; + } + + /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ + do { + unsigned long now; + + prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); + timeout = jiffies; + ide_port_for_each_present_dev(i, tdrive, hwif) { + if ((tdrive->dev_flags & IDE_DFLAG_PARKED) && + time_after(tdrive->sleep, timeout)) + timeout = tdrive->sleep; + } + + now = jiffies; + if (time_before_eq(timeout, now)) + break; + + spin_unlock_irqrestore(&hwif->lock, flags); + timeout = schedule_timeout_uninterruptible(timeout - now); + spin_lock_irqsave(&hwif->lock, flags); + } while (timeout); + finish_wait(&ide_park_wq, &wait); + + /* + * First, reset any device state data we were maintaining + * for any of the drives on this interface. + */ + ide_port_for_each_dev(i, tdrive, hwif) + pre_reset(tdrive); + + if (io_ports->ctl_addr == 0) { + spin_unlock_irqrestore(&hwif->lock, flags); + ide_complete_drive_reset(drive, -ENXIO); + return ide_stopped; + } + + /* + * Note that we also set nIEN while resetting the device, + * to mask unwanted interrupts from the interface during the reset. + * However, due to the design of PC hardware, this will cause an + * immediate interrupt due to the edge transition it produces. + * This single interrupt gives us a "fast poll" for drives that + * recover from reset very quickly, saving us the first 50ms wait time. + * + * TODO: add ->softreset method and stop abusing ->set_irq + */ + /* set SRST and nIEN */ + tp_ops->set_irq(hwif, 4); + /* more than enough time */ + udelay(10); + /* clear SRST, leave nIEN (unless device is on the quirk list) */ + tp_ops->set_irq(hwif, drive->quirk_list == 2); + /* more than enough time */ + udelay(10); + hwif->poll_timeout = jiffies + WAIT_WORSTCASE; + hwif->polling = 1; + __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); + + /* + * Some weird controller like resetting themselves to a strange + * state when the disks are reset this way. At least, the Winbond + * 553 documentation says that + */ + port_ops = hwif->port_ops; + if (port_ops && port_ops->resetproc) + port_ops->resetproc(drive); + + spin_unlock_irqrestore(&hwif->lock, flags); + return ide_started; +} + +/* + * ide_do_reset() is the entry point to the drive/interface reset code. + */ + +ide_startstop_t ide_do_reset(ide_drive_t *drive) +{ + return do_reset1(drive, 0); +} +EXPORT_SYMBOL(ide_do_reset); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3eab1c6c9b3..317ec62c33d 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -327,8 +327,10 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, return ide_stopped; } - ide_init_sg_cmd(drive, rq); - ide_map_sg(drive, rq); + if (blk_fs_request(rq) || pc->req_xfer) { + ide_init_sg_cmd(drive, rq); + ide_map_sg(drive, rq); + } pc->sg = hwif->sg_table; pc->sg_cnt = hwif->sg_nents; diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c index 3ec762cb60a..fcd4d8153df 100644 --- a/drivers/ide/ide-floppy_proc.c +++ b/drivers/ide/ide-floppy_proc.c @@ -29,5 +29,5 @@ const struct ide_proc_devset ide_floppy_settings[] = { IDE_PROC_DEVSET(bios_head, 0, 255), IDE_PROC_DEVSET(bios_sect, 0, 63), IDE_PROC_DEVSET(ticks, 0, 255), - { 0 }, + { NULL }, }; diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c new file mode 100644 index 00000000000..45b43dd49cd --- /dev/null +++ b/drivers/ide/ide-io-std.c @@ -0,0 +1,316 @@ + +#include <linux/kernel.h> +#include <linux/ide.h> + +/* + * Conventional PIO operations for ATA devices + */ + +static u8 ide_inb(unsigned long port) +{ + return (u8) inb(port); +} + +static void ide_outb(u8 val, unsigned long port) +{ + outb(val, port); +} + +/* + * MMIO operations, typically used for SATA controllers + */ + +static u8 ide_mm_inb(unsigned long port) +{ + return (u8) readb((void __iomem *) port); +} + +static void ide_mm_outb(u8 value, unsigned long port) +{ + writeb(value, (void __iomem *) port); +} + +void ide_exec_command(ide_hwif_t *hwif, u8 cmd) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); + else + outb(cmd, hwif->io_ports.command_addr); +} +EXPORT_SYMBOL_GPL(ide_exec_command); + +u8 ide_read_status(ide_hwif_t *hwif) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + return readb((void __iomem *)hwif->io_ports.status_addr); + else + return inb(hwif->io_ports.status_addr); +} +EXPORT_SYMBOL_GPL(ide_read_status); + +u8 ide_read_altstatus(ide_hwif_t *hwif) +{ + if (hwif->host_flags & IDE_HFLAG_MMIO) + return readb((void __iomem *)hwif->io_ports.ctl_addr); + else + return inb(hwif->io_ports.ctl_addr); +} +EXPORT_SYMBOL_GPL(ide_read_altstatus); + +void ide_set_irq(ide_hwif_t *hwif, int on) +{ + u8 ctl = ATA_DEVCTL_OBS; + + if (on == 4) { /* hack for SRST */ + ctl |= 4; + on &= ~4; + } + + ctl |= on ? 0 : 2; + + if (hwif->host_flags & IDE_HFLAG_MMIO) + writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); + else + outb(ctl, hwif->io_ports.ctl_addr); +} +EXPORT_SYMBOL_GPL(ide_set_irq); + +void ide_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + void (*tf_outb)(u8 addr, unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (mmio) + tf_outb = ide_mm_outb; + else + tf_outb = ide_outb; + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + + if (task->tf_flags & IDE_TFLAG_OUT_DATA) { + u16 data = (tf->hob_data << 8) | tf->data; + + if (mmio) + writew(data, (void __iomem *)io_ports->data_addr); + else + outw(data, io_ports->data_addr); + } + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) + tf_outb(tf->hob_feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) + tf_outb(tf->hob_nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) + tf_outb(tf->hob_lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) + tf_outb(tf->hob_lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) + tf_outb(tf->hob_lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + tf_outb(tf->feature, io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + tf_outb(tf->nsect, io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + tf_outb(tf->lbal, io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + tf_outb(tf->lbam, io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + tf_outb(tf->lbah, io_ports->lbah_addr); + + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + tf_outb((tf->device & HIHI) | drive->select, + io_ports->device_addr); +} +EXPORT_SYMBOL_GPL(ide_tf_load); + +void ide_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + struct ide_taskfile *tf = &task->tf; + void (*tf_outb)(u8 addr, unsigned long port); + u8 (*tf_inb)(unsigned long port); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + if (mmio) { + tf_outb = ide_mm_outb; + tf_inb = ide_mm_inb; + } else { + tf_outb = ide_outb; + tf_inb = ide_inb; + } + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data; + + if (mmio) + data = readw((void __iomem *)io_ports->data_addr); + else + data = inw(io_ports->data_addr); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_FEATURE) + tf->feature = tf_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = tf_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = tf_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = tf_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = tf_inb(io_ports->lbah_addr); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = tf_inb(io_ports->device_addr); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = tf_inb(io_ports->feature_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = tf_inb(io_ports->nsect_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = tf_inb(io_ports->lbal_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = tf_inb(io_ports->lbam_addr); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = tf_inb(io_ports->lbah_addr); + } +} +EXPORT_SYMBOL_GPL(ide_tf_read); + +/* + * Some localbus EIDE interfaces require a special access sequence + * when using 32-bit I/O instructions to transfer data. We call this + * the "vlb_sync" sequence, which consists of three successive reads + * of the sector count register location, with interrupts disabled + * to ensure that the reads all happen together. + */ +static void ata_vlb_sync(unsigned long port) +{ + (void)inb(port); + (void)inb(port); + (void)inb(port); +} + +/* + * This is used for most PIO data transfers *from* the IDE interface + * + * These routines will round up any request for an odd number of bytes, + * so if an odd len is specified, be sure that there's at least one + * extra byte allocated for the buffer. + */ +void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf, + unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; + u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + len++; + + if (io_32bit) { + unsigned long uninitialized_var(flags); + + if ((io_32bit & 2) && !mmio) { + local_irq_save(flags); + ata_vlb_sync(io_ports->nsect_addr); + } + + if (mmio) + __ide_mm_insl((void __iomem *)data_addr, buf, len / 4); + else + insl(data_addr, buf, len / 4); + + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); + + if ((len & 3) >= 2) { + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, + (u8 *)buf + (len & ~3), 1); + else + insw(data_addr, (u8 *)buf + (len & ~3), 1); + } + } else { + if (mmio) + __ide_mm_insw((void __iomem *)data_addr, buf, len / 2); + else + insw(data_addr, buf, len / 2); + } +} +EXPORT_SYMBOL_GPL(ide_input_data); + +/* + * This is used for most PIO data transfers *to* the IDE interface + */ +void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf, + unsigned int len) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_io_ports *io_ports = &hwif->io_ports; + unsigned long data_addr = io_ports->data_addr; + u8 io_32bit = drive->io_32bit; + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + + len++; + + if (io_32bit) { + unsigned long uninitialized_var(flags); + + if ((io_32bit & 2) && !mmio) { + local_irq_save(flags); + ata_vlb_sync(io_ports->nsect_addr); + } + + if (mmio) + __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4); + else + outsl(data_addr, buf, len / 4); + + if ((io_32bit & 2) && !mmio) + local_irq_restore(flags); + + if ((len & 3) >= 2) { + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, + (u8 *)buf + (len & ~3), 1); + else + outsw(data_addr, (u8 *)buf + (len & ~3), 1); + } + } else { + if (mmio) + __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2); + else + outsw(data_addr, buf, len / 2); + } +} +EXPORT_SYMBOL_GPL(ide_output_data); + +const struct ide_tp_ops default_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + + .set_irq = ide_set_irq, + + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9ee51adf567..2e92497b58a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -196,7 +196,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } EXPORT_SYMBOL(ide_end_drive_cmd); -static void ide_kill_rq(ide_drive_t *drive, struct request *rq) +void ide_kill_rq(ide_drive_t *drive, struct request *rq) { if (rq->rq_disk) { struct ide_driver *drv; @@ -207,133 +207,6 @@ static void ide_kill_rq(ide_drive_t *drive, struct request *rq) ide_end_request(drive, 0, 0); } -static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - ide_hwif_t *hwif = drive->hwif; - - if ((stat & ATA_BUSY) || - ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { - /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else if (stat & ATA_ERR) { - /* err has different meaning on cdrom and tape */ - if (err == ATA_ABORTED) { - if ((drive->dev_flags & IDE_DFLAG_LBA) && - /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */ - hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS) - return ide_stopped; - } else if ((err & BAD_CRC) == BAD_CRC) { - /* UDMA crc error, just retry the operation */ - drive->crc_count++; - } else if (err & (ATA_BBK | ATA_UNC)) { - /* retries won't help these */ - rq->errors = ERROR_MAX; - } else if (err & ATA_TRK0NF) { - /* help it find track zero */ - rq->errors |= ERROR_RECAL; - } - } - - if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ && - (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { - int nsect = drive->mult_count ? drive->mult_count : 1; - - ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); - } - - if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { - ide_kill_rq(drive, rq); - return ide_stopped; - } - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - rq->errors |= ERROR_RESET; - - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); - } - - if ((rq->errors & ERROR_RECAL) == ERROR_RECAL) - drive->special.b.recalibrate = 1; - - ++rq->errors; - - return ide_stopped; -} - -static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - ide_hwif_t *hwif = drive->hwif; - - if ((stat & ATA_BUSY) || - ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) { - /* other bits are useless when BUSY */ - rq->errors |= ERROR_RESET; - } else { - /* add decoding error stuff */ - } - - if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ)) - /* force an abort */ - hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE); - - if (rq->errors >= ERROR_MAX) { - ide_kill_rq(drive, rq); - } else { - if ((rq->errors & ERROR_RESET) == ERROR_RESET) { - ++rq->errors; - return ide_do_reset(drive); - } - ++rq->errors; - } - - return ide_stopped; -} - -static ide_startstop_t -__ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) -{ - if (drive->media == ide_disk) - return ide_ata_error(drive, rq, stat, err); - return ide_atapi_error(drive, rq, stat, err); -} - -/** - * ide_error - handle an error on the IDE - * @drive: drive the error occurred on - * @msg: message to report - * @stat: status bits - * - * ide_error() takes action based on the error returned by the drive. - * For normal I/O that may well include retries. We deal with - * both new-style (taskfile) and old style command handling here. - * In the case of taskfile command handling there is work left to - * do - */ - -ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) -{ - struct request *rq; - u8 err; - - err = ide_dump_status(drive, msg, stat); - - rq = drive->hwif->rq; - if (rq == NULL) - return ide_stopped; - - /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { - rq->errors = 1; - ide_end_drive_cmd(drive, stat, err); - return ide_stopped; - } - - return __ide_error(drive, rq, stat, err); -} -EXPORT_SYMBOL_GPL(ide_error); - static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; @@ -490,71 +363,16 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return ide_stopped; } -int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, - int arg) -{ - struct request_queue *q = drive->queue; - struct request *rq; - int ret = 0; - - if (!(setting->flags & DS_SYNC)) - return setting->set(drive, arg); - - rq = blk_get_request(q, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_len = 5; - rq->cmd[0] = REQ_DEVSET_EXEC; - *(int *)&rq->cmd[1] = arg; - rq->special = setting->set; - - if (blk_execute_rq(q, NULL, rq, 0)) - ret = rq->errors; - blk_put_request(rq); - - return ret; -} -EXPORT_SYMBOL_GPL(ide_devset_execute); - static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) { u8 cmd = rq->cmd[0]; - if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) { - ide_task_t task; - struct ide_taskfile *tf = &task.tf; - - memset(&task, 0, sizeof(task)); - if (cmd == REQ_PARK_HEADS) { - drive->sleep = *(unsigned long *)rq->special; - drive->dev_flags |= IDE_DFLAG_SLEEPING; - tf->command = ATA_CMD_IDLEIMMEDIATE; - tf->feature = 0x44; - tf->lbal = 0x4c; - tf->lbam = 0x4e; - tf->lbah = 0x55; - task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER; - } else /* cmd == REQ_UNPARK_HEADS */ - tf->command = ATA_CMD_CHK_POWER; - - task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - task.rq = rq; - drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA; - return do_rw_taskfile(drive, &task); - } - switch (cmd) { + case REQ_PARK_HEADS: + case REQ_UNPARK_HEADS: + return ide_do_park_unpark(drive, rq); case REQ_DEVSET_EXEC: - { - int err, (*setfunc)(ide_drive_t *, int) = rq->special; - - err = setfunc(drive, *(int *)&rq->cmd[1]); - if (err) - rq->errors = err; - else - err = 1; - ide_end_request(drive, err, 0); - return ide_stopped; - } + return ide_do_devset(drive, rq); case REQ_DRIVE_RESET: return ide_do_reset(drive); default: @@ -820,63 +638,6 @@ plug_device_2: blk_plug_device(q); } -/* - * un-busy the port etc, and clear any pending DMA status. we want to - * retry the current request in pio mode instead of risking tossing it - * all away - */ -static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq; - ide_startstop_t ret = ide_stopped; - - /* - * end current dma transaction - */ - - if (error < 0) { - printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); - (void)hwif->dma_ops->dma_end(drive); - ret = ide_error(drive, "dma timeout error", - hwif->tp_ops->read_status(hwif)); - } else { - printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); - hwif->dma_ops->dma_timeout(drive); - } - - /* - * disable dma for now, but remember that we did so because of - * a timeout -- we'll reenable after we finish this next request - * (or rather the first chunk of it) in pio. - */ - drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY; - drive->retry_pio++; - ide_dma_off_quietly(drive); - - /* - * un-busy drive etc and make sure request is sane - */ - - rq = hwif->rq; - if (!rq) - goto out; - - hwif->rq = NULL; - - rq->errors = 0; - - if (!rq->bio) - goto out; - - rq->sector = rq->bio->bi_sector; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->buffer = bio_data(rq->bio); -out: - return ret; -} - static void ide_plug_device(ide_drive_t *drive) { struct request_queue *q = drive->queue; @@ -888,6 +649,29 @@ static void ide_plug_device(ide_drive_t *drive) spin_unlock_irqrestore(q->queue_lock, flags); } +static int drive_is_ready(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 stat = 0; + + if (drive->waiting_for_dma) + return hwif->dma_ops->dma_test_irq(drive); + + if (hwif->io_ports.ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) + stat = hwif->tp_ops->read_altstatus(hwif); + else + /* Note: this may clear a pending IRQ!! */ + stat = hwif->tp_ops->read_status(hwif); + + if (stat & ATA_BUSY) + /* drive busy: definitely not interrupting */ + return 0; + + /* drive ready: *might* be interrupting */ + return 1; +} + /** * ide_timer_expiry - handle lack of an IDE interrupt * @data: timer callback magic (hwif) @@ -908,7 +692,7 @@ void ide_timer_expiry (unsigned long data) ide_drive_t *uninitialized_var(drive); ide_handler_t *handler; unsigned long flags; - unsigned long wait = -1; + int wait = -1; int plug_device = 0; spin_lock_irqsave(&hwif->lock, flags); @@ -1162,54 +946,7 @@ out_early: return irq_ret; } - -/** - * ide_do_drive_cmd - issue IDE special command - * @drive: device to issue command - * @rq: request to issue - * - * This function issues a special IDE device request - * onto the request queue. - * - * the rq is queued at the head of the request queue, displacing - * the currently-being-processed request and this function - * returns immediately without waiting for the new rq to be - * completed. This is VERY DANGEROUS, and is intended for - * careful use by the ATAPI tape/cdrom driver code. - */ - -void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq) -{ - struct request_queue *q = drive->queue; - unsigned long flags; - - drive->hwif->rq = NULL; - - spin_lock_irqsave(q->queue_lock, flags); - __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); - spin_unlock_irqrestore(q->queue_lock, flags); -} -EXPORT_SYMBOL(ide_do_drive_cmd); - -void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) -{ - ide_hwif_t *hwif = drive->hwif; - ide_task_t task; - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_FEATURE | tf_flags; - task.tf.feature = dma; /* Use PIO/DMA */ - task.tf.lbam = bcount & 0xff; - task.tf.lbah = (bcount >> 8) & 0xff; - - ide_tf_dump(drive->name, &task.tf); - hwif->tp_ops->set_irq(hwif, 1); - SELECT_MASK(drive, 0); - hwif->tp_ops->tf_load(drive, &task); -} - -EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load); +EXPORT_SYMBOL_GPL(ide_intr); void ide_pad_transfer(ide_drive_t *drive, int write, int len) { diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 753b92ebe0a..317c5dadd7c 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -27,35 +27,7 @@ #include <asm/uaccess.h> #include <asm/io.h> -/* - * Conventional PIO operations for ATA devices - */ - -static u8 ide_inb (unsigned long port) -{ - return (u8) inb(port); -} - -static void ide_outb (u8 val, unsigned long port) -{ - outb(val, port); -} - -/* - * MMIO operations, typically used for SATA controllers - */ - -static u8 ide_mm_inb (unsigned long port) -{ - return (u8) readb((void __iomem *) port); -} - -static void ide_mm_outb (u8 value, unsigned long port) -{ - writeb(value, (void __iomem *) port); -} - -void SELECT_DRIVE (ide_drive_t *drive) +void SELECT_DRIVE(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; @@ -78,275 +50,6 @@ void SELECT_MASK(ide_drive_t *drive, int mask) port_ops->maskproc(drive, mask); } -void ide_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); - else - outb(cmd, hwif->io_ports.command_addr); -} -EXPORT_SYMBOL_GPL(ide_exec_command); - -u8 ide_read_status(ide_hwif_t *hwif) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - return readb((void __iomem *)hwif->io_ports.status_addr); - else - return inb(hwif->io_ports.status_addr); -} -EXPORT_SYMBOL_GPL(ide_read_status); - -u8 ide_read_altstatus(ide_hwif_t *hwif) -{ - if (hwif->host_flags & IDE_HFLAG_MMIO) - return readb((void __iomem *)hwif->io_ports.ctl_addr); - else - return inb(hwif->io_ports.ctl_addr); -} -EXPORT_SYMBOL_GPL(ide_read_altstatus); - -void ide_set_irq(ide_hwif_t *hwif, int on) -{ - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - - if (hwif->host_flags & IDE_HFLAG_MMIO) - writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); - else - outb(ctl, hwif->io_ports.ctl_addr); -} -EXPORT_SYMBOL_GPL(ide_set_irq); - -void ide_tf_load(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - void (*tf_outb)(u8 addr, unsigned long port); - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; - - if (mmio) - tf_outb = ide_mm_outb; - else - tf_outb = ide_outb; - - if (task->tf_flags & IDE_TFLAG_FLAGGED) - HIHI = 0xFF; - - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { - u16 data = (tf->hob_data << 8) | tf->data; - - if (mmio) - writew(data, (void __iomem *)io_ports->data_addr); - else - outw(data, io_ports->data_addr); - } - - if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - tf_outb(tf->hob_feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - tf_outb(tf->hob_nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - tf_outb(tf->hob_lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - tf_outb(tf->hob_lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - tf_outb(tf->hob_lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - tf_outb(tf->feature, io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - tf_outb(tf->nsect, io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - tf_outb(tf->lbal, io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - tf_outb(tf->lbam, io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - tf_outb(tf->lbah, io_ports->lbah_addr); - - if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - tf_outb((tf->device & HIHI) | drive->select, - io_ports->device_addr); -} -EXPORT_SYMBOL_GPL(ide_tf_load); - -void ide_tf_read(ide_drive_t *drive, ide_task_t *task) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - struct ide_taskfile *tf = &task->tf; - void (*tf_outb)(u8 addr, unsigned long port); - u8 (*tf_inb)(unsigned long port); - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - if (mmio) { - tf_outb = ide_mm_outb; - tf_inb = ide_mm_inb; - } else { - tf_outb = ide_outb; - tf_inb = ide_inb; - } - - if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data; - - if (mmio) - data = readw((void __iomem *)io_ports->data_addr); - else - data = inw(io_ports->data_addr); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } - - /* be sure we're looking at the low order bits */ - tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_FEATURE) - tf->feature = tf_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = tf_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = tf_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = tf_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = tf_inb(io_ports->lbah_addr); - if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = tf_inb(io_ports->device_addr); - - if (task->tf_flags & IDE_TFLAG_LBA48) { - tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); - - if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = tf_inb(io_ports->feature_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = tf_inb(io_ports->nsect_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = tf_inb(io_ports->lbal_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = tf_inb(io_ports->lbam_addr); - if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = tf_inb(io_ports->lbah_addr); - } -} -EXPORT_SYMBOL_GPL(ide_tf_read); - -/* - * Some localbus EIDE interfaces require a special access sequence - * when using 32-bit I/O instructions to transfer data. We call this - * the "vlb_sync" sequence, which consists of three successive reads - * of the sector count register location, with interrupts disabled - * to ensure that the reads all happen together. - */ -static void ata_vlb_sync(unsigned long port) -{ - (void)inb(port); - (void)inb(port); - (void)inb(port); -} - -/* - * This is used for most PIO data transfers *from* the IDE interface - * - * These routines will round up any request for an odd number of bytes, - * so if an odd len is specified, be sure that there's at least one - * extra byte allocated for the buffer. - */ -void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf, - unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long data_addr = io_ports->data_addr; - u8 io_32bit = drive->io_32bit; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - len++; - - if (io_32bit) { - unsigned long uninitialized_var(flags); - - if ((io_32bit & 2) && !mmio) { - local_irq_save(flags); - ata_vlb_sync(io_ports->nsect_addr); - } - - if (mmio) - __ide_mm_insl((void __iomem *)data_addr, buf, len / 4); - else - insl(data_addr, buf, len / 4); - - if ((io_32bit & 2) && !mmio) - local_irq_restore(flags); - - if ((len & 3) >= 2) { - if (mmio) - __ide_mm_insw((void __iomem *)data_addr, - (u8 *)buf + (len & ~3), 1); - else - insw(data_addr, (u8 *)buf + (len & ~3), 1); - } - } else { - if (mmio) - __ide_mm_insw((void __iomem *)data_addr, buf, len / 2); - else - insw(data_addr, buf, len / 2); - } -} -EXPORT_SYMBOL_GPL(ide_input_data); - -/* - * This is used for most PIO data transfers *to* the IDE interface - */ -void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf, - unsigned int len) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - unsigned long data_addr = io_ports->data_addr; - u8 io_32bit = drive->io_32bit; - u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; - - if (io_32bit) { - unsigned long uninitialized_var(flags); - - if ((io_32bit & 2) && !mmio) { - local_irq_save(flags); - ata_vlb_sync(io_ports->nsect_addr); - } - - if (mmio) - __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4); - else - outsl(data_addr, buf, len / 4); - - if ((io_32bit & 2) && !mmio) - local_irq_restore(flags); - - if ((len & 3) >= 2) { - if (mmio) - __ide_mm_outsw((void __iomem *)data_addr, - (u8 *)buf + (len & ~3), 1); - else - outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } - } else { - if (mmio) - __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2); - else - outsw(data_addr, buf, len / 2); - } -} -EXPORT_SYMBOL_GPL(ide_output_data); - u8 ide_read_error(ide_drive_t *drive) { ide_task_t task; @@ -360,35 +63,6 @@ u8 ide_read_error(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_read_error); -void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) -{ - ide_task_t task; - - memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_NSECT; - - drive->hwif->tp_ops->tf_read(drive, &task); - - *bcount = (task.tf.lbah << 8) | task.tf.lbam; - *ireason = task.tf.nsect & 3; -} -EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); - -const struct ide_tp_ops default_tp_ops = { - .exec_command = ide_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - - .set_irq = ide_set_irq, - - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - void ide_fix_driveid(u16 *id) { #ifndef __LITTLE_ENDIAN @@ -410,7 +84,7 @@ void ide_fix_driveid(u16 *id) * returned by the ATA_CMD_ID_ATA[PI] commands. */ -void ide_fixstring (u8 *s, const int bytecount, const int byteswap) +void ide_fixstring(u8 *s, const int bytecount, const int byteswap) { u8 *p, *end = &s[bytecount & ~1]; /* bytecount must be even */ @@ -433,44 +107,9 @@ void ide_fixstring (u8 *s, const int bytecount, const int byteswap) while (p != end) *p++ = '\0'; } - EXPORT_SYMBOL(ide_fixstring); /* - * Needed for PCI irq sharing - */ -int drive_is_ready (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat = 0; - - if (drive->waiting_for_dma) - return hwif->dma_ops->dma_test_irq(drive); - - /* - * We do a passive status test under shared PCI interrupts on - * cards that truly share the ATA side interrupt, but may also share - * an interrupt with another pci card/device. We make no assumptions - * about possible isa-pnp and pci-pnp issues yet. - */ - if (hwif->io_ports.ctl_addr && - (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) - stat = hwif->tp_ops->read_altstatus(hwif); - else - /* Note: this may clear a pending IRQ!! */ - stat = hwif->tp_ops->read_status(hwif); - - if (stat & ATA_BUSY) - /* drive busy: definitely not interrupting */ - return 0; - - /* drive ready: *might* be interrupting */ - return 1; -} - -EXPORT_SYMBOL(drive_is_ready); - -/* * This routine busy-waits for the drive status to be not "busy". * It then checks the status for all of the "good" bits and none * of the "bad" bits, and if all is okay it returns 0. All other @@ -481,7 +120,8 @@ EXPORT_SYMBOL(drive_is_ready); * setting a timer to wake up at half second intervals thereafter, * until timeout is achieved, before timing out. */ -static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat) +static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, + unsigned long timeout, u8 *rstat) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; @@ -539,7 +179,8 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti * The caller should return the updated value of "startstop" in this case, * "startstop" is unchanged when the function returns 0. */ -int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout) +int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, + u8 bad, unsigned long timeout) { int err; u8 stat; @@ -559,7 +200,6 @@ int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 ba return err; } - EXPORT_SYMBOL(ide_wait_stat); /** @@ -580,7 +220,6 @@ int ide_in_drive_list(u16 *id, const struct drive_list_entry *table) return 1; return 0; } - EXPORT_SYMBOL_GPL(ide_in_drive_list); /* @@ -605,7 +244,7 @@ static const struct drive_list_entry ivb_list[] = { * All hosts that use the 80c ribbon must use! * The name is derived from upper byte of word 93 and the 80c ribbon. */ -u8 eighty_ninty_three (ide_drive_t *drive) +u8 eighty_ninty_three(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u16 *id = drive->id; @@ -650,47 +289,19 @@ no_80w: int ide_driveid_update(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; u16 *id; - unsigned long flags; - u8 stat; - - /* - * Re-read drive->id for possible DMA mode - * change (copied from ide-probe.c) - */ + int rc; - SELECT_MASK(drive, 1); - tp_ops->set_irq(hwif, 0); - msleep(50); - tp_ops->exec_command(hwif, ATA_CMD_ID_ATA); - - if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 1)) { - SELECT_MASK(drive, 0); + id = kmalloc(SECTOR_SIZE, GFP_ATOMIC); + if (id == NULL) return 0; - } - - msleep(50); /* wait for IRQ and ATA_DRQ */ - stat = tp_ops->read_status(hwif); - if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) { - SELECT_MASK(drive, 0); - printk("%s: CHECK for good STATUS\n", drive->name); - return 0; - } - local_irq_save(flags); + SELECT_MASK(drive, 1); + rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id); SELECT_MASK(drive, 0); - id = kmalloc(SECTOR_SIZE, GFP_ATOMIC); - if (!id) { - local_irq_restore(flags); - return 0; - } - tp_ops->input_data(drive, NULL, id, SECTOR_SIZE); - (void)tp_ops->read_status(hwif); /* clear drive IRQ */ - local_irq_enable(); - local_irq_restore(flags); - ide_fix_driveid(id); + + if (rc) + goto out_err; drive->id[ATA_ID_UDMA_MODES] = id[ATA_ID_UDMA_MODES]; drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES]; @@ -703,6 +314,12 @@ int ide_driveid_update(ide_drive_t *drive) ide_dma_off(drive); return 1; +out_err: + SELECT_MASK(drive, 0); + if (rc == 2) + printk(KERN_ERR "%s: %s: bad status\n", drive->name, __func__); + kfree(id); + return 0; } int ide_config_drive_speed(ide_drive_t *drive, u8 speed) @@ -729,18 +346,15 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) * but for some reason these don't work at * this point (lost interrupt). */ - /* - * Select the drive, and issue the SETFEATURES command - */ - disable_irq_nosync(hwif->irq); - + /* * FIXME: we race against the running IRQ here if * this is called from non IRQ context. If we use * disable_irq() we hang on the error path. Work * is needed. */ - + disable_irq_nosync(hwif->irq); + udelay(1); SELECT_DRIVE(drive); SELECT_MASK(drive, 1); @@ -810,8 +424,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) * * See also ide_execute_command */ -static void __ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, - unsigned int timeout, ide_expiry_t *expiry) +void __ide_set_handler(ide_drive_t *drive, ide_handler_t *handler, + unsigned int timeout, ide_expiry_t *expiry) { ide_hwif_t *hwif = drive->hwif; @@ -833,9 +447,8 @@ void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, __ide_set_handler(drive, handler, timeout, expiry); spin_unlock_irqrestore(&hwif->lock, flags); } - EXPORT_SYMBOL(ide_set_handler); - + /** * ide_execute_command - execute an IDE command * @drive: IDE drive to issue the command against @@ -845,7 +458,7 @@ EXPORT_SYMBOL(ide_set_handler); * @expiry: handler to run on timeout * * Helper function to issue an IDE command. This handles the - * atomicity requirements, command timing and ensures that the + * atomicity requirements, command timing and ensures that the * handler and IRQ setup do not race. All IDE command kick off * should go via this function or do equivalent locking. */ @@ -882,301 +495,6 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); -static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) -{ - struct request *rq = drive->hwif->rq; - - if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) - ide_end_request(drive, err ? err : 1, 0); -} - -/* needed below */ -static ide_startstop_t do_reset1 (ide_drive_t *, int); - -/* - * atapi_reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an atapi drive reset operation. If the drive has not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 stat; - - SELECT_DRIVE(drive); - udelay (10); - stat = hwif->tp_ops->read_status(hwif); - - if (OK_STAT(stat, 0, ATA_BUSY)) - printk("%s: ATAPI reset complete\n", drive->name); - else { - if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); - /* continue polling */ - return ide_started; - } - /* end of polling */ - hwif->polling = 0; - printk("%s: ATAPI reset timed-out, status=0x%02x\n", - drive->name, stat); - /* do it the old fashioned way */ - return do_reset1(drive, 1); - } - /* done polling */ - hwif->polling = 0; - ide_complete_drive_reset(drive, 0); - return ide_stopped; -} - -static void ide_reset_report_error(ide_hwif_t *hwif, u8 err) -{ - static const char *err_master_vals[] = - { NULL, "passed", "formatter device error", - "sector buffer error", "ECC circuitry error", - "controlling MPU error" }; - - u8 err_master = err & 0x7f; - - printk(KERN_ERR "%s: reset: master: ", hwif->name); - if (err_master && err_master < 6) - printk(KERN_CONT "%s", err_master_vals[err_master]); - else - printk(KERN_CONT "error (0x%02x?)", err); - if (err & 0x80) - printk(KERN_CONT "; slave: failed"); - printk(KERN_CONT "\n"); -} - -/* - * reset_pollfunc() gets invoked to poll the interface for completion every 50ms - * during an ide reset operation. If the drives have not yet responded, - * and we have not yet hit our maximum waiting time, then the timer is restarted - * for another 50ms. - */ -static ide_startstop_t reset_pollfunc (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 tmp; - int err = 0; - - if (port_ops && port_ops->reset_poll) { - err = port_ops->reset_poll(drive); - if (err) { - printk(KERN_ERR "%s: host reset_poll failure for %s.\n", - hwif->name, drive->name); - goto out; - } - } - - tmp = hwif->tp_ops->read_status(hwif); - - if (!OK_STAT(tmp, 0, ATA_BUSY)) { - if (time_before(jiffies, hwif->poll_timeout)) { - ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); - /* continue polling */ - return ide_started; - } - printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); - drive->failures++; - err = -EIO; - } else { - tmp = ide_read_error(drive); - - if (tmp == 1) { - printk(KERN_INFO "%s: reset: success\n", hwif->name); - drive->failures = 0; - } else { - ide_reset_report_error(hwif, tmp); - drive->failures++; - err = -EIO; - } - } -out: - hwif->polling = 0; /* done polling */ - ide_complete_drive_reset(drive, err); - return ide_stopped; -} - -static void ide_disk_pre_reset(ide_drive_t *drive) -{ - int legacy = (drive->id[ATA_ID_CFS_ENABLE_2] & 0x0400) ? 0 : 1; - - drive->special.all = 0; - drive->special.b.set_geometry = legacy; - drive->special.b.recalibrate = legacy; - - drive->mult_count = 0; - drive->dev_flags &= ~IDE_DFLAG_PARKED; - - if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 && - (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) - drive->mult_req = 0; - - if (drive->mult_req != drive->mult_count) - drive->special.b.set_multmode = 1; -} - -static void pre_reset(ide_drive_t *drive) -{ - const struct ide_port_ops *port_ops = drive->hwif->port_ops; - - if (drive->media == ide_disk) - ide_disk_pre_reset(drive); - else - drive->dev_flags |= IDE_DFLAG_POST_RESET; - - if (drive->dev_flags & IDE_DFLAG_USING_DMA) { - if (drive->crc_count) - ide_check_dma_crc(drive); - else - ide_dma_off(drive); - } - - if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) { - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) { - drive->dev_flags &= ~IDE_DFLAG_UNMASK; - drive->io_32bit = 0; - } - return; - } - - if (port_ops && port_ops->pre_reset) - port_ops->pre_reset(drive); - - if (drive->current_speed != 0xff) - drive->desired_speed = drive->current_speed; - drive->current_speed = 0xff; -} - -/* - * do_reset1() attempts to recover a confused drive by resetting it. - * Unfortunately, resetting a disk drive actually resets all devices on - * the same interface, so it can really be thought of as resetting the - * interface rather than resetting the drive. - * - * ATAPI devices have their own reset mechanism which allows them to be - * individually reset without clobbering other devices on the same interface. - * - * Unfortunately, the IDE interface does not generate an interrupt to let - * us know when the reset operation has finished, so we must poll for this. - * Equally poor, though, is the fact that this may a very long time to complete, - * (up to 30 seconds worstcase). So, instead of busy-waiting here for it, - * we set a timer to poll at 50ms intervals. - */ -static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) -{ - ide_hwif_t *hwif = drive->hwif; - struct ide_io_ports *io_ports = &hwif->io_ports; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - const struct ide_port_ops *port_ops; - ide_drive_t *tdrive; - unsigned long flags, timeout; - int i; - DEFINE_WAIT(wait); - - spin_lock_irqsave(&hwif->lock, flags); - - /* We must not reset with running handlers */ - BUG_ON(hwif->handler != NULL); - - /* For an ATAPI device, first try an ATAPI SRST. */ - if (drive->media != ide_disk && !do_not_try_atapi) { - pre_reset(drive); - SELECT_DRIVE(drive); - udelay (20); - tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - ndelay(400); - hwif->poll_timeout = jiffies + WAIT_WORSTCASE; - hwif->polling = 1; - __ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); - spin_unlock_irqrestore(&hwif->lock, flags); - return ide_started; - } - - /* We must not disturb devices in the IDE_DFLAG_PARKED state. */ - do { - unsigned long now; - - prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE); - timeout = jiffies; - ide_port_for_each_dev(i, tdrive, hwif) { - if (tdrive->dev_flags & IDE_DFLAG_PRESENT && - tdrive->dev_flags & IDE_DFLAG_PARKED && - time_after(tdrive->sleep, timeout)) - timeout = tdrive->sleep; - } - - now = jiffies; - if (time_before_eq(timeout, now)) - break; - - spin_unlock_irqrestore(&hwif->lock, flags); - timeout = schedule_timeout_uninterruptible(timeout - now); - spin_lock_irqsave(&hwif->lock, flags); - } while (timeout); - finish_wait(&ide_park_wq, &wait); - - /* - * First, reset any device state data we were maintaining - * for any of the drives on this interface. - */ - ide_port_for_each_dev(i, tdrive, hwif) - pre_reset(tdrive); - - if (io_ports->ctl_addr == 0) { - spin_unlock_irqrestore(&hwif->lock, flags); - ide_complete_drive_reset(drive, -ENXIO); - return ide_stopped; - } - - /* - * Note that we also set nIEN while resetting the device, - * to mask unwanted interrupts from the interface during the reset. - * However, due to the design of PC hardware, this will cause an - * immediate interrupt due to the edge transition it produces. - * This single interrupt gives us a "fast poll" for drives that - * recover from reset very quickly, saving us the first 50ms wait time. - * - * TODO: add ->softreset method and stop abusing ->set_irq - */ - /* set SRST and nIEN */ - tp_ops->set_irq(hwif, 4); - /* more than enough time */ - udelay(10); - /* clear SRST, leave nIEN (unless device is on the quirk list) */ - tp_ops->set_irq(hwif, drive->quirk_list == 2); - /* more than enough time */ - udelay(10); - hwif->poll_timeout = jiffies + WAIT_WORSTCASE; - hwif->polling = 1; - __ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); - - /* - * Some weird controller like resetting themselves to a strange - * state when the disks are reset this way. At least, the Winbond - * 553 documentation says that - */ - port_ops = hwif->port_ops; - if (port_ops && port_ops->resetproc) - port_ops->resetproc(drive); - - spin_unlock_irqrestore(&hwif->lock, flags); - return ide_started; -} - -/* - * ide_do_reset() is the entry point to the drive/interface reset code. - */ - -ide_startstop_t ide_do_reset (ide_drive_t *drive) -{ - return do_reset1(drive, 0); -} - -EXPORT_SYMBOL(ide_do_reset); - /* * ide_wait_not_busy() waits for the currently selected device on the hwif * to report a non-busy status, see comments in ide_probe_port(). @@ -1185,7 +503,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) { u8 stat = 0; - while(timeout--) { + while (timeout--) { /* * Turn this into a schedule() sleep once I'm sure * about locking issues (2.5 work ?). diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 09526a0de73..f6c683dd298 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -5,163 +5,6 @@ #include <linux/ide.h> #include <linux/bitops.h> -static const char *udma_str[] = - { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", - "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; -static const char *mwdma_str[] = - { "MWDMA0", "MWDMA1", "MWDMA2" }; -static const char *swdma_str[] = - { "SWDMA0", "SWDMA1", "SWDMA2" }; -static const char *pio_str[] = - { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; - -/** - * ide_xfer_verbose - return IDE mode names - * @mode: transfer mode - * - * Returns a constant string giving the name of the mode - * requested. - */ - -const char *ide_xfer_verbose(u8 mode) -{ - const char *s; - u8 i = mode & 0xf; - - if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) - s = udma_str[i]; - else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) - s = mwdma_str[i]; - else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) - s = swdma_str[i]; - else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) - s = pio_str[i & 0x7]; - else if (mode == XFER_PIO_SLOW) - s = "PIO SLOW"; - else - s = "XFER ERROR"; - - return s; -} -EXPORT_SYMBOL(ide_xfer_verbose); - -/** - * ide_rate_filter - filter transfer mode - * @drive: IDE device - * @speed: desired speed - * - * Given the available transfer modes this function returns - * the best available speed at or below the speed requested. - * - * TODO: check device PIO capabilities - */ - -static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mode = ide_find_dma_mode(drive, speed); - - if (mode == 0) { - if (hwif->pio_mask) - mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; - else - mode = XFER_PIO_4; - } - -/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ - - return min(speed, mode); -} - -/** - * ide_get_best_pio_mode - get PIO mode from drive - * @drive: drive to consider - * @mode_wanted: preferred mode - * @max_mode: highest allowed mode - * - * This routine returns the recommended PIO settings for a given drive, - * based on the drive->id information and the ide_pio_blacklist[]. - * - * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. - * This is used by most chipset support modules when "auto-tuning". - */ - -u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) -{ - u16 *id = drive->id; - int pio_mode = -1, overridden = 0; - - if (mode_wanted != 255) - return min_t(u8, mode_wanted, max_mode); - - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) - pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); - - if (pio_mode != -1) { - printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); - } else { - pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; - if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ - pio_mode = 2; - overridden = 1; - } - - if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ - if (ata_id_has_iordy(id)) { - if (id[ATA_ID_PIO_MODES] & 7) { - overridden = 0; - if (id[ATA_ID_PIO_MODES] & 4) - pio_mode = 5; - else if (id[ATA_ID_PIO_MODES] & 2) - pio_mode = 4; - else - pio_mode = 3; - } - } - } - - if (overridden) - printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", - drive->name); - } - - if (pio_mode > max_mode) - pio_mode = max_mode; - - return pio_mode; -} -EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); - -/* req_pio == "255" for auto-tune */ -void ide_set_pio(ide_drive_t *drive, u8 req_pio) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 host_pio, pio; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return; - - BUG_ON(hwif->pio_mask == 0x00); - - host_pio = fls(hwif->pio_mask) - 1; - - pio = ide_get_best_pio_mode(drive, req_pio, host_pio); - - /* - * TODO: - * - report device max PIO mode - * - check req_pio != 255 against device max PIO mode - */ - printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", - drive->name, host_pio, req_pio, - req_pio == 255 ? "(auto-tune)" : "", pio); - - (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); -} -EXPORT_SYMBOL_GPL(ide_set_pio); - /** * ide_toggle_bounce - handle bounce buffering * @drive: drive to update @@ -188,89 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL) - return -1; - - /* - * TODO: temporary hack for some legacy host drivers that didn't - * set transfer mode on the device in ->set_pio_mode method... - */ - if (port_ops->set_dma_mode == NULL) { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return 0; - } - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return 0; - } else { - port_ops->set_pio_mode(drive, mode - XFER_PIO_0); - return ide_config_drive_speed(drive, mode); - } -} - -int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL) - return -1; - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - port_ops->set_dma_mode(drive, mode); - return 0; - } else { - port_ops->set_dma_mode(drive, mode); - return ide_config_drive_speed(drive, mode); - } -} -EXPORT_SYMBOL_GPL(ide_set_dma_mode); - -/** - * ide_set_xfer_rate - set transfer rate - * @drive: drive to set - * @rate: speed to attempt to set - * - * General helper for setting the speed of an IDE device. This - * function knows about user enforced limits from the configuration - * which ->set_pio_mode/->set_dma_mode does not. - */ - -int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return -1; - - rate = ide_rate_filter(drive, rate); - - BUG_ON(rate < XFER_PIO_0); - - if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) - return ide_set_pio_mode(drive, rate); - - return ide_set_dma_mode(drive, rate); -} - static void ide_dump_opcode(ide_drive_t *drive) { struct request *rq = drive->hwif->rq; diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index c875a957596..f30e52152fc 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -1,5 +1,6 @@ #include <linux/kernel.h> #include <linux/ide.h> +#include <linux/hdreg.h> #include <linux/jiffies.h> #include <linux/blkdev.h> @@ -60,6 +61,30 @@ out: return; } +ide_startstop_t ide_do_park_unpark(ide_drive_t *drive, struct request *rq) +{ + ide_task_t task; + struct ide_taskfile *tf = &task.tf; + + memset(&task, 0, sizeof(task)); + if (rq->cmd[0] == REQ_PARK_HEADS) { + drive->sleep = *(unsigned long *)rq->special; + drive->dev_flags |= IDE_DFLAG_SLEEPING; + tf->command = ATA_CMD_IDLEIMMEDIATE; + tf->feature = 0x44; + tf->lbal = 0x4c; + tf->lbam = 0x4e; + tf->lbah = 0x55; + task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER; + } else /* cmd == REQ_UNPARK_HEADS */ + tf->command = ATA_CMD_CHK_POWER; + + task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE; + task.rq = rq; + drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA; + return do_rw_taskfile(drive, &task); +} + ssize_t ide_park_show(struct device *dev, struct device_attribute *attr, char *buf) { diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index bddae2b329a..61111fd2713 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -33,8 +33,6 @@ static int ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); -#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS) - #define DECLARE_GENERIC_PCI_DEV(extra_flags) \ { \ .name = DRV_NAME, \ @@ -61,7 +59,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { /* 2: SAMURAI / HT6565 / HINT_IDE */ DECLARE_GENERIC_PCI_DEV(0), /* 3: UM8673F / UM8886A / UM8886BF */ - DECLARE_GENERIC_PCI_DEV(IDE_HFLAGS_UMC), + DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_DMA), /* 4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */ DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA), diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index ce0818a993f..974067043fb 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -181,16 +181,16 @@ static void ide_classify_atapi_dev(ide_drive_t *drive) * do_identify - identify a drive * @drive: drive to identify * @cmd: command used + * @id: buffer for IDENTIFY data * * Called when we have issued a drive identify command to * read and parse the results. This function is run with * interrupts disabled. */ -static void do_identify(ide_drive_t *drive, u8 cmd) +static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id) { ide_hwif_t *hwif = drive->hwif; - u16 *id = drive->id; char *m = (char *)&id[ATA_ID_PROD]; unsigned long flags; int bswap = 1; @@ -233,16 +233,6 @@ static void do_identify(ide_drive_t *drive, u8 cmd) drive->dev_flags |= IDE_DFLAG_PRESENT; drive->dev_flags &= ~IDE_DFLAG_DEAD; - /* - * Check for an ATAPI device - */ - if (cmd == ATA_CMD_ID_ATAPI) - ide_classify_atapi_dev(drive); - else - /* - * Not an ATAPI device: looks like a "regular" hard disk - */ - ide_classify_ata_dev(drive); return; err_misc: kfree(id); @@ -250,21 +240,19 @@ err_misc: } /** - * actual_try_to_identify - send ata/atapi identify + * ide_dev_read_id - send ATA/ATAPI IDENTIFY command * @drive: drive to identify * @cmd: command to use + * @id: buffer for IDENTIFY data * - * try_to_identify() sends an ATA(PI) IDENTIFY request to a drive - * and waits for a response. It also monitors irqs while this is - * happening, in hope of automatically determining which one is - * being used by the interface. + * Sends an ATA(PI) IDENTIFY request to a drive and waits for a response. * * Returns: 0 device was identified * 1 device timed-out (no response to identify request) * 2 device aborted the command (refused to identify itself) */ -static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) +int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; @@ -273,6 +261,13 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) unsigned long timeout; u8 s = 0, a = 0; + /* + * Disable device IRQ. Otherwise we'll get spurious interrupts + * during the identify phase that the IRQ handler isn't expecting. + */ + if (io_ports->ctl_addr) + tp_ops->set_irq(hwif, 0); + /* take a deep breath */ msleep(50); @@ -317,7 +312,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) { /* drive returned ID */ - do_identify(drive, cmd); + do_identify(drive, cmd, id); /* drive responded with ID */ rc = 0; /* clear drive IRQ */ @@ -329,63 +324,6 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) return rc; } -/** - * try_to_identify - try to identify a drive - * @drive: drive to probe - * @cmd: command to use - * - * Issue the identify command and then do IRQ probing to - * complete the identification when needed by finding the - * IRQ the drive is attached to - */ - -static int try_to_identify (ide_drive_t *drive, u8 cmd) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - int retval; - int autoprobe = 0; - unsigned long cookie = 0; - - /* - * Disable device irq unless we need to - * probe for it. Otherwise we'll get spurious - * interrupts during the identify-phase that - * the irq handler isn't expecting. - */ - if (hwif->io_ports.ctl_addr) { - if (!hwif->irq) { - autoprobe = 1; - cookie = probe_irq_on(); - } - tp_ops->set_irq(hwif, autoprobe); - } - - retval = actual_try_to_identify(drive, cmd); - - if (autoprobe) { - int irq; - - tp_ops->set_irq(hwif, 0); - /* clear drive IRQ */ - (void)tp_ops->read_status(hwif); - udelay(5); - irq = probe_irq_off(cookie); - if (!hwif->irq) { - if (irq > 0) { - hwif->irq = irq; - } else { - /* Mmmm.. multiple IRQs.. - * don't know which was ours - */ - printk(KERN_ERR "%s: IRQ probe failed (0x%lx)\n", - drive->name, cookie); - } - } - } - return retval; -} - int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) { u8 stat; @@ -440,6 +378,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; + u16 *id = drive->id; int rc; u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat; @@ -475,11 +414,10 @@ static int do_probe (ide_drive_t *drive, u8 cmd) if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) || present || cmd == ATA_CMD_ID_ATAPI) { - /* send cmd and wait */ - if ((rc = try_to_identify(drive, cmd))) { + rc = ide_dev_read_id(drive, cmd, id); + if (rc) /* failed: try again */ - rc = try_to_identify(drive,cmd); - } + rc = ide_dev_read_id(drive, cmd, id); stat = tp_ops->read_status(hwif); @@ -494,7 +432,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); - rc = try_to_identify(drive, cmd); + rc = ide_dev_read_id(drive, cmd, id); } /* ensure drive IRQ is clear */ @@ -517,37 +455,6 @@ static int do_probe (ide_drive_t *drive, u8 cmd) return rc; } -/* - * - */ -static void enable_nest (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_tp_ops *tp_ops = hwif->tp_ops; - u8 stat; - - printk(KERN_INFO "%s: enabling %s -- ", - hwif->name, (char *)&drive->id[ATA_ID_PROD]); - - SELECT_DRIVE(drive); - msleep(50); - tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST); - - if (ide_busy_sleep(hwif, WAIT_WORSTCASE, 0)) { - printk(KERN_CONT "failed (timeout)\n"); - return; - } - - msleep(50); - - stat = tp_ops->read_status(hwif); - - if (!OK_STAT(stat, 0, BAD_STAT)) - printk(KERN_CONT "failed (status = 0x%02x)\n", stat); - else - printk(KERN_CONT "success\n"); -} - /** * probe_for_drives - upper level drive probe * @drive: drive to probe for @@ -563,6 +470,8 @@ static void enable_nest (ide_drive_t *drive) static u8 probe_for_drive(ide_drive_t *drive) { char *m; + int rc; + u8 cmd; /* * In order to keep things simple we have an id @@ -586,21 +495,19 @@ static u8 probe_for_drive(ide_drive_t *drive) /* skip probing? */ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) { -retry: /* if !(success||timed-out) */ - if (do_probe(drive, ATA_CMD_ID_ATA) >= 2) + cmd = ATA_CMD_ID_ATA; + rc = do_probe(drive, cmd); + if (rc >= 2) { /* look for ATAPI device */ - (void)do_probe(drive, ATA_CMD_ID_ATAPI); + cmd = ATA_CMD_ID_ATAPI; + rc = do_probe(drive, cmd); + } if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) /* drive not found */ return 0; - if (strstr(m, "E X A B Y T E N E S T")) { - enable_nest(drive); - goto retry; - } - /* identification failed? */ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) { if (drive->media == ide_disk) { @@ -614,8 +521,12 @@ retry: printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name); drive->dev_flags &= ~IDE_DFLAG_PRESENT; } + } else { + if (cmd == ATA_CMD_ID_ATAPI) + ide_classify_atapi_dev(drive); + else + ide_classify_ata_dev(drive); } - /* drive was found */ } if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) @@ -779,7 +690,6 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave); static int ide_probe_port(ide_hwif_t *hwif) { ide_drive_t *drive; - unsigned long flags; unsigned int irqd; int i, rc = -ENODEV; @@ -797,9 +707,6 @@ static int ide_probe_port(ide_hwif_t *hwif) if (irqd) disable_irq(hwif->irq); - local_save_flags(flags); - local_irq_enable_in_hardirq(); - if (ide_port_wait_ready(hwif) == -EBUSY) printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); @@ -813,8 +720,6 @@ static int ide_probe_port(ide_hwif_t *hwif) rc = 0; } - local_irq_restore(flags); - /* * Use cached IRQ number. It might be (and is...) changed by probe * code above @@ -831,29 +736,18 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) ide_drive_t *drive; int i; - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - if (port_ops && port_ops->quirkproc) - port_ops->quirkproc(drive); - } + ide_port_for_each_present_dev(i, drive, hwif) { + if (port_ops && port_ops->quirkproc) + port_ops->quirkproc(drive); } - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - ide_set_max_pio(drive); + ide_port_for_each_present_dev(i, drive, hwif) { + ide_set_max_pio(drive); - drive->dev_flags |= IDE_DFLAG_NICE1; + drive->dev_flags |= IDE_DFLAG_NICE1; - if (hwif->dma_ops) - ide_set_dma(drive); - } - } - - ide_port_for_each_dev(i, drive, hwif) { - if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) - drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; - else - drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT; + if (hwif->dma_ops) + ide_set_dma(drive); } } @@ -924,10 +818,7 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) int i, j = 0; mutex_lock(&ide_cfg_mtx); - ide_port_for_each_dev(i, drive, hwif) { - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - continue; - + ide_port_for_each_present_dev(i, drive, hwif) { if (ide_init_queue(drive)) { printk(KERN_ERR "ide: failed to init %s\n", drive->name); @@ -950,14 +841,12 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) static int init_irq (ide_hwif_t *hwif) { struct ide_io_ports *io_ports = &hwif->io_ports; + irq_handler_t irq_handler; int sa = 0; - mutex_lock(&ide_cfg_mtx); - spin_lock_init(&hwif->lock); - - init_timer(&hwif->timer); - hwif->timer.function = &ide_timer_expiry; - hwif->timer.data = (unsigned long)hwif; + irq_handler = hwif->host->irq_handler; + if (irq_handler == NULL) + irq_handler = ide_intr; #if defined(__mc68000__) sa = IRQF_SHARED; @@ -969,7 +858,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) hwif->tp_ops->set_irq(hwif, 1); - if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif)) + if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; if (!hwif->rqsize) { @@ -992,10 +881,8 @@ static int init_irq (ide_hwif_t *hwif) printk(KERN_CONT " (serialized)"); printk(KERN_CONT "\n"); - mutex_unlock(&ide_cfg_mtx); return 0; out_up: - mutex_unlock(&ide_cfg_mtx); return 1; } @@ -1094,14 +981,9 @@ static void drive_release_dev (struct device *dev) static int hwif_init(ide_hwif_t *hwif) { - int old_irq; - if (!hwif->irq) { - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - if (!hwif->irq) { - printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name); - return 0; - } + printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name); + return 0; } if (register_blkdev(hwif->major, hwif->name)) @@ -1119,29 +1001,12 @@ static int hwif_init(ide_hwif_t *hwif) sg_init_table(hwif->sg_table, hwif->sg_max_nents); - if (init_irq(hwif) == 0) - goto done; - - old_irq = hwif->irq; - /* - * It failed to initialise. Find the default IRQ for - * this port and try that. - */ - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - if (!hwif->irq) { - printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n", - hwif->name, old_irq); - goto out; - } if (init_irq(hwif)) { - printk(KERN_ERR "%s: probed IRQ %d and default IRQ %d failed\n", - hwif->name, old_irq, hwif->irq); + printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n", + hwif->name, hwif->irq); goto out; } - printk(KERN_WARNING "%s: probed IRQ %d failed, using default\n", - hwif->name, hwif->irq); -done: blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, THIS_MODULE, ata_probe, ata_lock, hwif); return 1; @@ -1156,13 +1021,10 @@ static void hwif_register_devices(ide_hwif_t *hwif) ide_drive_t *drive; unsigned int i; - ide_port_for_each_dev(i, drive, hwif) { + ide_port_for_each_present_dev(i, drive, hwif) { struct device *dev = &drive->gendev; int ret; - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) - continue; - dev_set_name(dev, "%u.%u", hwif->index, i); dev->parent = &hwif->gendev; dev->bus = &ide_bus_type; @@ -1187,6 +1049,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (hwif->host_flags & IDE_HFLAG_IO_32BIT) drive->io_32bit = 1; + if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) + drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT; if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) drive->dev_flags |= IDE_DFLAG_UNMASK; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) @@ -1208,10 +1072,6 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, if (d->init_iops) d->init_iops(hwif); - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || - (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) - hwif->irq = port ? 15 : 14; - /* ->host_flags may be set by ->init_iops (or even earlier...) */ hwif->host_flags |= d->host_flags; hwif->pio_mask = d->pio_mask; @@ -1312,6 +1172,12 @@ static void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) hwif->name[2] = 'e'; hwif->name[3] = '0' + index; + spin_lock_init(&hwif->lock); + + init_timer(&hwif->timer); + hwif->timer.function = &ide_timer_expiry; + hwif->timer.data = (unsigned long)hwif; + init_completion(&hwif->gendev_rel_comp); hwif->tp_ops = &default_tp_ops; @@ -1562,7 +1428,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, j++; - ide_acpi_init(hwif); + ide_acpi_init_port(hwif); if (hwif->present) ide_acpi_port_init_devices(hwif); @@ -1619,11 +1485,9 @@ static void __ide_port_unregister_devices(ide_hwif_t *hwif) ide_drive_t *drive; int i; - ide_port_for_each_dev(i, drive, hwif) { - if (drive->dev_flags & IDE_DFLAG_PRESENT) { - device_unregister(&drive->gendev); - wait_for_completion(&drive->gendev_rel_comp); - } + ide_port_for_each_present_dev(i, drive, hwif) { + device_unregister(&drive->gendev); + wait_for_completion(&drive->gendev_rel_comp); } } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 1d8978b3314..417cde56eaf 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -231,7 +231,7 @@ static const struct ide_proc_devset ide_generic_settings[] = { IDE_PROC_DEVSET(pio_mode, 0, 255), IDE_PROC_DEVSET(unmaskirq, 0, 1), IDE_PROC_DEVSET(using_dma, 0, 1), - { 0 }, + { NULL }, }; static void proc_ide_settings_warn(void) @@ -600,7 +600,7 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif) int i; ide_port_for_each_dev(i, drive, hwif) { - if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0 || drive->proc) + if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) continue; drive->proc = proc_mkdir(drive->name, parent); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bb450a7608c..4e6181c7bbd 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2166,7 +2166,7 @@ static const struct ide_proc_devset idetape_settings[] = { __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, mulf_tdsc, divf_tdsc), - { 0 }, + { NULL }, }; #endif diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c new file mode 100644 index 00000000000..6910f6a257e --- /dev/null +++ b/drivers/ide/ide-xfer-mode.c @@ -0,0 +1,246 @@ +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/ide.h> +#include <linux/bitops.h> + +static const char *udma_str[] = + { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", + "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; +static const char *mwdma_str[] = + { "MWDMA0", "MWDMA1", "MWDMA2" }; +static const char *swdma_str[] = + { "SWDMA0", "SWDMA1", "SWDMA2" }; +static const char *pio_str[] = + { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; + +/** + * ide_xfer_verbose - return IDE mode names + * @mode: transfer mode + * + * Returns a constant string giving the name of the mode + * requested. + */ + +const char *ide_xfer_verbose(u8 mode) +{ + const char *s; + u8 i = mode & 0xf; + + if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) + s = udma_str[i]; + else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) + s = mwdma_str[i]; + else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) + s = swdma_str[i]; + else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) + s = pio_str[i & 0x7]; + else if (mode == XFER_PIO_SLOW) + s = "PIO SLOW"; + else + s = "XFER ERROR"; + + return s; +} +EXPORT_SYMBOL(ide_xfer_verbose); + +/** + * ide_get_best_pio_mode - get PIO mode from drive + * @drive: drive to consider + * @mode_wanted: preferred mode + * @max_mode: highest allowed mode + * + * This routine returns the recommended PIO settings for a given drive, + * based on the drive->id information and the ide_pio_blacklist[]. + * + * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. + * This is used by most chipset support modules when "auto-tuning". + */ + +u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) +{ + u16 *id = drive->id; + int pio_mode = -1, overridden = 0; + + if (mode_wanted != 255) + return min_t(u8, mode_wanted, max_mode); + + if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) + pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); + + if (pio_mode != -1) { + printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); + } else { + pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; + if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ + pio_mode = 2; + overridden = 1; + } + + if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ + if (ata_id_has_iordy(id)) { + if (id[ATA_ID_PIO_MODES] & 7) { + overridden = 0; + if (id[ATA_ID_PIO_MODES] & 4) + pio_mode = 5; + else if (id[ATA_ID_PIO_MODES] & 2) + pio_mode = 4; + else + pio_mode = 3; + } + } + } + + if (overridden) + printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", + drive->name); + } + + if (pio_mode > max_mode) + pio_mode = max_mode; + + return pio_mode; +} +EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); + +int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL) + return -1; + + /* + * TODO: temporary hack for some legacy host drivers that didn't + * set transfer mode on the device in ->set_pio_mode method... + */ + if (port_ops->set_dma_mode == NULL) { + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + return 0; + } else { + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); + return ide_config_drive_speed(drive, mode); + } +} + +int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; + + if (port_ops == NULL || port_ops->set_dma_mode == NULL) + return -1; + + if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { + if (ide_config_drive_speed(drive, mode)) + return -1; + port_ops->set_dma_mode(drive, mode); + return 0; + } else { + port_ops->set_dma_mode(drive, mode); + return ide_config_drive_speed(drive, mode); + } +} +EXPORT_SYMBOL_GPL(ide_set_dma_mode); + +/* req_pio == "255" for auto-tune */ +void ide_set_pio(ide_drive_t *drive, u8 req_pio) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + u8 host_pio, pio; + + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return; + + BUG_ON(hwif->pio_mask == 0x00); + + host_pio = fls(hwif->pio_mask) - 1; + + pio = ide_get_best_pio_mode(drive, req_pio, host_pio); + + /* + * TODO: + * - report device max PIO mode + * - check req_pio != 255 against device max PIO mode + */ + printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", + drive->name, host_pio, req_pio, + req_pio == 255 ? "(auto-tune)" : "", pio); + + (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); +} +EXPORT_SYMBOL_GPL(ide_set_pio); + +/** + * ide_rate_filter - filter transfer mode + * @drive: IDE device + * @speed: desired speed + * + * Given the available transfer modes this function returns + * the best available speed at or below the speed requested. + * + * TODO: check device PIO capabilities + */ + +static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) +{ + ide_hwif_t *hwif = drive->hwif; + u8 mode = ide_find_dma_mode(drive, speed); + + if (mode == 0) { + if (hwif->pio_mask) + mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; + else + mode = XFER_PIO_4; + } + +/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ + + return min(speed, mode); +} + +/** + * ide_set_xfer_rate - set transfer rate + * @drive: drive to set + * @rate: speed to attempt to set + * + * General helper for setting the speed of an IDE device. This + * function knows about user enforced limits from the configuration + * which ->set_pio_mode/->set_dma_mode does not. + */ + +int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) +{ + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (port_ops == NULL || port_ops->set_dma_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) + return -1; + + rate = ide_rate_filter(drive, rate); + + BUG_ON(rate < XFER_PIO_0); + + if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) + return ide_set_pio_mode(drive, rate); + + return ide_set_dma_mode(drive, rate); +} diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 0920e3b0c96..92c9b90931e 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -62,160 +62,6 @@ struct class *ide_port_class; -/* - * Locks for IDE setting functionality - */ - -DEFINE_MUTEX(ide_setting_mtx); - -ide_devset_get(io_32bit, io_32bit); - -static int set_io_32bit(ide_drive_t *drive, int arg) -{ - if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) - return -EPERM; - - if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) - return -EINVAL; - - drive->io_32bit = arg; - - return 0; -} - -ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS); - -static int set_ksettings(ide_drive_t *drive, int arg) -{ - if (arg < 0 || arg > 1) - return -EINVAL; - - if (arg) - drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS; - else - drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS; - - return 0; -} - -ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA); - -static int set_using_dma(ide_drive_t *drive, int arg) -{ -#ifdef CONFIG_BLK_DEV_IDEDMA - int err = -EPERM; - - if (arg < 0 || arg > 1) - return -EINVAL; - - if (ata_id_has_dma(drive->id) == 0) - goto out; - - if (drive->hwif->dma_ops == NULL) - goto out; - - err = 0; - - if (arg) { - if (ide_set_dma(drive)) - err = -EIO; - } else - ide_dma_off(drive); - -out: - return err; -#else - if (arg < 0 || arg > 1) - return -EINVAL; - - return -EPERM; -#endif -} - -/* - * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away - */ -static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio) -{ - switch (req_pio) { - case 202: - case 201: - case 200: - case 102: - case 101: - case 100: - return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0; - case 9: - case 8: - return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0; - case 7: - case 6: - return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0; - default: - return 0; - } -} - -static int set_pio_mode(ide_drive_t *drive, int arg) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (arg < 0 || arg > 255) - return -EINVAL; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return -ENOSYS; - - if (set_pio_mode_abuse(drive->hwif, arg)) { - if (arg == 8 || arg == 9) { - unsigned long flags; - - /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ - spin_lock_irqsave(&hwif->lock, flags); - port_ops->set_pio_mode(drive, arg); - spin_unlock_irqrestore(&hwif->lock, flags); - } else - port_ops->set_pio_mode(drive, arg); - } else { - int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); - - ide_set_pio(drive, arg); - - if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) { - if (keep_dma) - ide_dma_on(drive); - } - } - - return 0; -} - -ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK); - -static int set_unmaskirq(ide_drive_t *drive, int arg) -{ - if (drive->dev_flags & IDE_DFLAG_NO_UNMASK) - return -EPERM; - - if (arg < 0 || arg > 1) - return -EINVAL; - - if (arg) - drive->dev_flags |= IDE_DFLAG_UNMASK; - else - drive->dev_flags &= ~IDE_DFLAG_UNMASK; - - return 0; -} - -ide_ext_devset_rw_sync(io_32bit, io_32bit); -ide_ext_devset_rw_sync(keepsettings, ksettings); -ide_ext_devset_rw_sync(unmaskirq, unmaskirq); -ide_ext_devset_rw_sync(using_dma, using_dma); -__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode); - /** * ide_device_get - get an additional reference to a ide_drive_t * @drive: device to get a reference to @@ -527,6 +373,8 @@ static int __init ide_init(void) goto out_port_class; } + ide_acpi_init(); + proc_ide_create(); return 0; diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 13b8153112e..6b9fc950b4a 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -603,7 +603,7 @@ static void it8212_disable_raid(struct pci_dev *dev) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); } -static unsigned int init_chipset_it821x(struct pci_dev *dev) +static int init_chipset_it821x(struct pci_dev *dev) { u8 conf; static char *mode[2] = { "pass through", "smart" }; diff --git a/drivers/ide/ns87415.c b/drivers/ide/ns87415.c index 83643ed9a42..ea48a3ee806 100644 --- a/drivers/ide/ns87415.c +++ b/drivers/ide/ns87415.c @@ -286,9 +286,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) } if (!using_inta) - hwif->irq = __ide_default_irq(hwif->io_ports.data_addr); - else if (!hwif->irq && hwif->mate && hwif->mate->irq) - hwif->irq = hwif->mate->irq; /* share IRQ with mate */ + hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); if (!hwif->dma_base) return; diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index f21290c4b44..b68906c3c17 100644 --- a/drivers/ide/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c @@ -325,7 +325,7 @@ static void apple_kiwi_init(struct pci_dev *pdev) } #endif /* CONFIG_PPC_PMAC */ -static unsigned int init_chipset_pdcnew(struct pci_dev *dev) +static int init_chipset_pdcnew(struct pci_dev *dev) { const char *name = DRV_NAME; unsigned long dma_base = pci_resource_start(dev, 4); @@ -444,7 +444,7 @@ static unsigned int init_chipset_pdcnew(struct pci_dev *dev) #endif out: - return dev->irq; + return 0; } static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 97193323aeb..cba66ebce4e 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -264,7 +264,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive) ide_dma_timeout(drive); } -static unsigned int init_chipset_pdc202xx(struct pci_dev *dev) +static int init_chipset_pdc202xx(struct pci_dev *dev) { unsigned long dmabase = pci_resource_start(dev, 4); u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; @@ -290,7 +290,7 @@ static unsigned int init_chipset_pdc202xx(struct pci_dev *dev) printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); } out: - return dev->irq; + return 0; } static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index f1e2e4ef0d7..2aa69993306 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -204,7 +204,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) * out to be nice and simple. */ -static unsigned int init_chipset_ich(struct pci_dev *dev) +static int init_chipset_ich(struct pci_dev *dev) { u32 extra = 0; @@ -318,19 +318,12 @@ static const struct ide_port_ops ich_port_ops = { .cable_detect = piix_cable_detect, }; -#ifndef CONFIG_IA64 - #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS -#else - #define IDE_HFLAGS_PIIX 0 -#endif - #define DECLARE_PIIX_DEV(udma) \ { \ .name = DRV_NAME, \ .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ .port_ops = &piix_port_ops, \ - .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ .mwdma_mask = ATA_MWDMA12_ONLY, \ @@ -344,7 +337,6 @@ static const struct ide_port_ops ich_port_ops = { .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ .port_ops = &ich_port_ops, \ - .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ .mwdma_mask = ATA_MWDMA12_ONLY, \ @@ -360,8 +352,7 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = { */ .name = DRV_NAME, .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}}, - .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA | - IDE_HFLAGS_PIIX, + .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, /* This is a painful system best to let it self tune for now */ }, diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c index 382102ba467..b6554ef9271 100644 --- a/drivers/ide/serverworks.c +++ b/drivers/ide/serverworks.c @@ -175,7 +175,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, 0x54, ultra_enable); } -static unsigned int init_chipset_svwks(struct pci_dev *dev) +static int init_chipset_svwks(struct pci_dev *dev) { unsigned int reg; u8 btr; @@ -270,7 +270,7 @@ static unsigned int init_chipset_svwks(struct pci_dev *dev) pci_write_config_byte(dev, 0x5A, btr); } - return dev->irq; + return 0; } static u8 ata66_svwks_svwks(ide_hwif_t *hwif) @@ -353,14 +353,11 @@ static const struct ide_port_ops svwks_port_ops = { .cable_detect = svwks_cable_detect, }; -#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS - static const struct ide_port_info serverworks_chipsets[] __devinitdata = { { /* 0: OSB4 */ .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &osb4_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = 0x00, /* UDMA is problematic on OSB4 */ @@ -369,7 +366,6 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -378,7 +374,6 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -387,7 +382,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -396,7 +391,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_svwks, .port_ops = &svwks_port_ops, - .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index e85d1ed29c2..24bc884826f 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -305,7 +305,6 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * @dev: PCI device holding interface * @d: IDE port info * @port: port number - * @irq: PCI IRQ * @hw: hw_regs_t instance corresponding to this port * * Perform the initial set up for the hardware interface structure. This @@ -316,7 +315,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * */ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, - unsigned int port, int irq, hw_regs_t *hw) + unsigned int port, hw_regs_t *hw) { unsigned long ctl = 0, base = 0; @@ -344,7 +343,6 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, } memset(hw, 0, sizeof(*hw)); - hw->irq = irq; hw->dev = &dev->dev; hw->chipset = d->chipset ? d->chipset : ide_pci; ide_std_init_ports(hw, base, ctl | 2); @@ -448,7 +446,6 @@ out: * ide_pci_setup_ports - configure ports/devices on PCI IDE * @dev: PCI device * @d: IDE port info - * @pciirq: IRQ line * @hw: hw_regs_t instances corresponding to this PCI IDE device * @hws: hw_regs_t pointers table to update * @@ -462,7 +459,7 @@ out: */ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, - int pciirq, hw_regs_t *hw, hw_regs_t **hws) + hw_regs_t *hw, hw_regs_t **hws) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; u8 tmp; @@ -481,7 +478,7 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, continue; /* port not enabled */ } - if (ide_hw_configure(dev, d, port, pciirq, hw + port)) + if (ide_hw_configure(dev, d, port, hw + port)) continue; *(hws + port) = hw + port; @@ -524,7 +521,7 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, if (noisy) printk(KERN_INFO "%s %s: not 100%% native mode: will " "probe irqs later\n", d->name, pci_name(dev)); - pciirq = ret; + pciirq = 0; } else if (!pciirq && noisy) { printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n", d->name, pci_name(dev), pciirq); @@ -549,7 +546,7 @@ int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d, if (ret < 0) goto out; - ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]); + ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); host = ide_host_alloc(d, hws); if (host == NULL) { @@ -568,7 +565,11 @@ int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d, goto out; /* fixup IRQ */ - hw[1].irq = hw[0].irq = ret; + if (ide_pci_is_in_compatibility_mode(dev)) { + hw[0].irq = pci_get_legacy_ide_irq(dev, 0); + hw[1].irq = pci_get_legacy_ide_irq(dev, 1); + } else + hw[1].irq = hw[0].irq = ret; ret = ide_host_register(host, d, hws); if (ret) @@ -591,7 +592,7 @@ int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2, if (ret < 0) goto out; - ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]); + ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]); } host = ide_host_alloc(d, hws); @@ -619,7 +620,11 @@ int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2, goto out; /* fixup IRQ */ - hw[i*2 + 1].irq = hw[i*2].irq = ret; + if (ide_pci_is_in_compatibility_mode(pdev[i])) { + hw[i*2].irq = pci_get_legacy_ide_irq(pdev[i], 0); + hw[i*2 + 1].irq = pci_get_legacy_ide_irq(pdev[i], 1); + } else + hw[i*2 + 1].irq = hw[i*2].irq = ret; } ret = ide_host_register(host, d, hws); diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index cb2b352b876..1811ae9cd84 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -464,7 +464,7 @@ static void sil_sata_pre_reset(ide_drive_t *drive) * to 133 MHz clocking if the system isn't already set up to do it. */ -static unsigned int init_chipset_siimage(struct pci_dev *dev) +static int init_chipset_siimage(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); void __iomem *ioaddr = host->host_priv; diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index 9ec1a4a4432..afca22beaad 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c @@ -447,7 +447,7 @@ static int __devinit sis_find_family(struct pci_dev *dev) return chipset_family; } -static unsigned int init_chipset_sis5513(struct pci_dev *dev) +static int init_chipset_sis5513(struct pci_dev *dev) { /* Make general config ops here 1/ tell IDE channels to operate in Compatibility mode only @@ -563,7 +563,7 @@ static const struct ide_port_info sis5513_chipset __devinitdata = { .name = DRV_NAME, .init_chipset = init_chipset_sis5513, .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA, + .host_flags = IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, }; diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index 6297956507c..dba213c51ba 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c @@ -271,7 +271,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev) * channel 0 here at least, but channel 1 has to be enabled by * firmware or arch code. We still set both to 16 bits mode. */ -static unsigned int init_chipset_sl82c105(struct pci_dev *dev) +static int init_chipset_sl82c105(struct pci_dev *dev) { u32 val; @@ -281,7 +281,7 @@ static unsigned int init_chipset_sl82c105(struct pci_dev *dev) val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - return dev->irq; + return 0; } static const struct ide_port_ops sl82c105_port_ops = { diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c index 40b4b94a428..f55d7d6313e 100644 --- a/drivers/ide/slc90e66.c +++ b/drivers/ide/slc90e66.c @@ -136,7 +136,6 @@ static const struct ide_port_info slc90e66_chipset __devinitdata = { .name = DRV_NAME, .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, .port_ops = &slc90e66_port_ops, - .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2_ONLY, .mwdma_mask = ATA_MWDMA12_ONLY, diff --git a/drivers/ide/trm290.c b/drivers/ide/trm290.c index b6a1285a402..1c09e549c42 100644 --- a/drivers/ide/trm290.c +++ b/drivers/ide/trm290.c @@ -277,9 +277,6 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) if (reg & 0x10) /* legacy mode */ hwif->irq = hwif->channel ? 15 : 14; - else if (!hwif->irq && hwif->mate && hwif->mate->irq) - /* sharing IRQ with mate */ - hwif->irq = hwif->mate->irq; #if 1 { diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 6092fe3f409..3ff7231e485 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -267,7 +267,7 @@ static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u) * and initialize its drive independent registers. */ -static unsigned int init_chipset_via82cxxx(struct pci_dev *dev) +static int init_chipset_via82cxxx(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct via82cxxx_dev *vdev = host->host_priv; @@ -443,16 +443,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i if ((via_config->flags & VIA_NO_UNMASK) == 0) d.host_flags |= IDE_HFLAG_UNMASK_IRQS; -#ifdef CONFIG_PPC_CHRP - if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos) - d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; -#endif - -#ifdef CONFIG_AMIGAONE - if (machine_is(amigaone)) - d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; -#endif - d.udma_mask = via_config->udma_mask; vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); |