summaryrefslogtreecommitdiffstats
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/ide-atapi.c41
-rw-r--r--drivers/ide/ide-cd.c38
-rw-r--r--drivers/ide/ide-cd.h4
-rw-r--r--drivers/ide/ide-floppy.c2
-rw-r--r--drivers/ide/ide-tape.c2
5 files changed, 43 insertions, 44 deletions
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8c5cf68fbd7..c110329ccb1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
*/
#include <linux/kernel.h>
+#include <linux/cdrom.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
@@ -252,6 +253,38 @@ int ide_scsi_expiry(ide_drive_t *drive)
}
EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+int ide_cd_expiry(ide_drive_t *drive)
+{
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned long wait = 0;
+
+ debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
+
+ /*
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
+ */
+ switch (rq->cmd[0]) {
+ case GPCMD_BLANK:
+ case GPCMD_FORMAT_UNIT:
+ case GPCMD_RESERVE_RZONE_TRACK:
+ case GPCMD_CLOSE_TRACK:
+ case GPCMD_FLUSH_CACHE:
+ wait = ATAPI_WAIT_PC;
+ break;
+ default:
+ if (!(rq->cmd_flags & REQ_QUIET))
+ printk(KERN_INFO "cmd 0x%x timed out\n",
+ rq->cmd[0]);
+ wait = 0;
+ break;
+ }
+ return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
+
int ide_cd_get_xferlen(struct request *rq)
{
if (blk_fs_request(rq))
@@ -562,11 +595,11 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return ide_started;
}
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
- ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout)
{
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
+ ide_expiry_t *expiry = NULL;
u32 tf_flags;
u16 bcount;
u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
@@ -578,9 +611,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (dev_is_idecd(drive)) {
tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+ expiry = ide_cd_expiry;
} else if (scsi) {
tf_flags = 0;
bcount = min(pc->req_xfer, 63 * 1024);
+ expiry = ide_scsi_expiry;
} else {
tf_flags = IDE_TFLAG_OUT_DEVICE;
bcount = ((drive->media == ide_tape) ?
@@ -613,7 +648,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
if (drive->dma)
drive->waiting_for_dma = 0;
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
- timeout, NULL);
+ timeout, expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8d3c7714682..105e4d855e6 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -511,38 +511,6 @@ end_request:
return 1;
}
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned long wait = 0;
-
- ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
- rq->cmd[0]);
-
- /*
- * Some commands are *slow* and normally take a long time to complete.
- * Usually we can use the ATAPI "disconnect" to bypass this, but not all
- * commands/drives support that. Let ide_timer_expiry keep polling us
- * for these.
- */
- switch (rq->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO PFX "cmd 0x%x timed out\n",
- rq->cmd[0]);
- wait = 0;
- break;
- }
- return wait;
-}
-
/*
* Set up the device registers for transferring a packet command on DEV,
* expecting to later transfer XFERLEN bytes. HANDLER is the routine
@@ -574,7 +542,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
/* packet command */
ide_execute_command(drive, ATA_CMD_PACKET, handler,
- ATAPI_WAIT_PC, cdrom_timer_expiry);
+ ATAPI_WAIT_PC, ide_cd_expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
@@ -621,7 +589,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
}
/* arm the interrupt handler */
- ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+ ide_set_handler(drive, handler, rq->timeout, ide_cd_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -1088,7 +1056,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
} else {
timeout = ATAPI_WAIT_PC;
if (!blk_fs_request(rq))
- expiry = cdrom_timer_expiry;
+ expiry = ide_cd_expiry;
}
ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 389faa42eaa..bf676b26218 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -16,10 +16,6 @@
#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC (60 * HZ)
#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
/************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 1f07f381893..fdec729d0e4 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470eb2b5..ac9e29a4991 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD);
}
/* A mode sense command is used to "sense" tape parameters. */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-16 21:30:50 +0000