summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/pcilynx.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ieee1394/pcilynx.h')
-rw-r--r--drivers/ieee1394/pcilynx.h468
1 files changed, 0 insertions, 468 deletions
diff --git a/drivers/ieee1394/pcilynx.h b/drivers/ieee1394/pcilynx.h
deleted file mode 100644
index 693a169acea..00000000000
--- a/drivers/ieee1394/pcilynx.h
+++ /dev/null
@@ -1,468 +0,0 @@
-#ifndef __PCILYNX_H__
-#define __PCILYNX_H__
-
-
-#define PCILYNX_DRIVER_NAME "pcilynx"
-#define PCILYNX_MAJOR 177
-
-#define PCILYNX_MINOR_AUX_START 0
-#define PCILYNX_MINOR_ROM_START 16
-#define PCILYNX_MINOR_RAM_START 32
-
-#define PCILYNX_MAX_REGISTER 0xfff
-#define PCILYNX_MAX_MEMORY 0xffff
-
-#define PCI_DEVICE_ID_TI_PCILYNX 0x8000
-#define MAX_PCILYNX_CARDS 4
-#define LOCALRAM_SIZE 4096
-
-#define NUM_ISORCV_PCL 4
-#define MAX_ISORCV_SIZE 2048
-#define ISORCV_PER_PAGE (PAGE_SIZE / MAX_ISORCV_SIZE)
-#define ISORCV_PAGES (NUM_ISORCV_PCL / ISORCV_PER_PAGE)
-
-#define CHANNEL_LOCALBUS 0
-#define CHANNEL_ASYNC_RCV 1
-#define CHANNEL_ISO_RCV 2
-#define CHANNEL_ASYNC_SEND 3
-#define CHANNEL_ISO_SEND 4
-
-#define PCILYNX_CONFIG_ROM_LENGTH 1024
-
-typedef int pcl_t;
-
-struct ti_lynx {
- int id; /* sequential card number */
-
- spinlock_t lock;
-
- struct pci_dev *dev;
-
- struct {
- unsigned reg_1394a:1;
- u32 vendor;
- u32 product;
- } phyic;
-
- enum { clear, have_intr, have_aux_buf, have_pcl_mem,
- have_1394_buffers, have_iomappings, is_host } state;
-
- /* remapped memory spaces */
- void __iomem *registers;
- void __iomem *local_rom;
- void __iomem *local_ram;
- void __iomem *aux_port;
- __be32 bus_info_block[5];
-
- /*
- * use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for
- * LOCALRAM_SIZE * 8 PCLs (each sized 128 bytes);
- * the following is an allocation bitmap
- */
- u8 pcl_bmap[LOCALRAM_SIZE / 1024];
-
- /* point to PCLs memory area if needed */
- void *pcl_mem;
- dma_addr_t pcl_mem_dma;
-
- /* PCLs for local mem / aux transfers */
- pcl_t dmem_pcl;
-
- /* IEEE-1394 part follows */
- struct hpsb_host *host;
-
- int phyid, isroot;
- int selfid_size;
- int phy_reg0;
-
- spinlock_t phy_reg_lock;
-
- pcl_t rcv_pcl_start, rcv_pcl;
- void *rcv_page;
- dma_addr_t rcv_page_dma;
- int rcv_active;
-
- struct lynx_send_data {
- pcl_t pcl_start, pcl;
- struct list_head queue;
- struct list_head pcl_queue; /* this queue contains at most one packet */
- spinlock_t queue_lock;
- dma_addr_t header_dma, data_dma;
- int channel;
- } async, iso_send;
-
- struct {
- pcl_t pcl[NUM_ISORCV_PCL];
- u32 stat[NUM_ISORCV_PCL];
- void *page[ISORCV_PAGES];
- dma_addr_t page_dma[ISORCV_PAGES];
- pcl_t pcl_start;
- int chan_count;
- int next, last, used, running;
- struct tasklet_struct tq;
- spinlock_t lock;
- } iso_rcv;
-
- u32 i2c_driven_state; /* the state we currently drive the Serial EEPROM Control register */
-};
-
-/* the per-file data structure for mem space access */
-struct memdata {
- struct ti_lynx *lynx;
- int cid;
- atomic_t aux_intr_last_seen;
- /* enum values are the same as LBUS_ADDR_SEL_* values below */
- enum { rom = 0x10000, aux = 0x20000, ram = 0 } type;
-};
-
-
-
-/*
- * Register read and write helper functions.
- */
-static inline void reg_write(const struct ti_lynx *lynx, int offset, u32 data)
-{
- writel(data, lynx->registers + offset);
-}
-
-static inline u32 reg_read(const struct ti_lynx *lynx, int offset)
-{
- return readl(lynx->registers + offset);
-}
-
-static inline void reg_set_bits(const struct ti_lynx *lynx, int offset,
- u32 mask)
-{
- reg_write(lynx, offset, (reg_read(lynx, offset) | mask));
-}
-
-static inline void reg_clear_bits(const struct ti_lynx *lynx, int offset,
- u32 mask)
-{
- reg_write(lynx, offset, (reg_read(lynx, offset) & ~mask));
-}
-
-
-
-/* chip register definitions follow */
-
-#define PCI_LATENCY_CACHELINE 0x0c
-
-#define MISC_CONTROL 0x40
-#define MISC_CONTROL_SWRESET (1<<0)
-
-#define SERIAL_EEPROM_CONTROL 0x44
-
-#define PCI_INT_STATUS 0x48
-#define PCI_INT_ENABLE 0x4c
-/* status and enable have identical bit numbers */
-#define PCI_INT_INT_PEND (1<<31)
-#define PCI_INT_FORCED_INT (1<<30)
-#define PCI_INT_SLV_ADR_PERR (1<<28)
-#define PCI_INT_SLV_DAT_PERR (1<<27)
-#define PCI_INT_MST_DAT_PERR (1<<26)
-#define PCI_INT_MST_DEV_TIMEOUT (1<<25)
-#define PCI_INT_INTERNAL_SLV_TIMEOUT (1<<23)
-#define PCI_INT_AUX_TIMEOUT (1<<18)
-#define PCI_INT_AUX_INT (1<<17)
-#define PCI_INT_1394 (1<<16)
-#define PCI_INT_DMA4_PCL (1<<9)
-#define PCI_INT_DMA4_HLT (1<<8)
-#define PCI_INT_DMA3_PCL (1<<7)
-#define PCI_INT_DMA3_HLT (1<<6)
-#define PCI_INT_DMA2_PCL (1<<5)
-#define PCI_INT_DMA2_HLT (1<<4)
-#define PCI_INT_DMA1_PCL (1<<3)
-#define PCI_INT_DMA1_HLT (1<<2)
-#define PCI_INT_DMA0_PCL (1<<1)
-#define PCI_INT_DMA0_HLT (1<<0)
-/* all DMA interrupts combined: */
-#define PCI_INT_DMA_ALL 0x3ff
-
-#define PCI_INT_DMA_HLT(chan) (1 << (chan * 2))
-#define PCI_INT_DMA_PCL(chan) (1 << (chan * 2 + 1))
-
-#define LBUS_ADDR 0xb4
-#define LBUS_ADDR_SEL_RAM (0x0<<16)
-#define LBUS_ADDR_SEL_ROM (0x1<<16)
-#define LBUS_ADDR_SEL_AUX (0x2<<16)
-#define LBUS_ADDR_SEL_ZV (0x3<<16)
-
-#define GPIO_CTRL_A 0xb8
-#define GPIO_CTRL_B 0xbc
-#define GPIO_DATA_BASE 0xc0
-
-#define DMA_BREG(base, chan) (base + chan * 0x20)
-#define DMA_SREG(base, chan) (base + chan * 0x10)
-
-#define DMA0_PREV_PCL 0x100
-#define DMA1_PREV_PCL 0x120
-#define DMA2_PREV_PCL 0x140
-#define DMA3_PREV_PCL 0x160
-#define DMA4_PREV_PCL 0x180
-#define DMA_PREV_PCL(chan) (DMA_BREG(DMA0_PREV_PCL, chan))
-
-#define DMA0_CURRENT_PCL 0x104
-#define DMA1_CURRENT_PCL 0x124
-#define DMA2_CURRENT_PCL 0x144
-#define DMA3_CURRENT_PCL 0x164
-#define DMA4_CURRENT_PCL 0x184
-#define DMA_CURRENT_PCL(chan) (DMA_BREG(DMA0_CURRENT_PCL, chan))
-
-#define DMA0_CHAN_STAT 0x10c
-#define DMA1_CHAN_STAT 0x12c
-#define DMA2_CHAN_STAT 0x14c
-#define DMA3_CHAN_STAT 0x16c
-#define DMA4_CHAN_STAT 0x18c
-#define DMA_CHAN_STAT(chan) (DMA_BREG(DMA0_CHAN_STAT, chan))
-/* CHAN_STATUS registers share bits */
-#define DMA_CHAN_STAT_SELFID (1<<31)
-#define DMA_CHAN_STAT_ISOPKT (1<<30)
-#define DMA_CHAN_STAT_PCIERR (1<<29)
-#define DMA_CHAN_STAT_PKTERR (1<<28)
-#define DMA_CHAN_STAT_PKTCMPL (1<<27)
-#define DMA_CHAN_STAT_SPECIALACK (1<<14)
-
-
-#define DMA0_CHAN_CTRL 0x110
-#define DMA1_CHAN_CTRL 0x130
-#define DMA2_CHAN_CTRL 0x150
-#define DMA3_CHAN_CTRL 0x170
-#define DMA4_CHAN_CTRL 0x190
-#define DMA_CHAN_CTRL(chan) (DMA_BREG(DMA0_CHAN_CTRL, chan))
-/* CHAN_CTRL registers share bits */
-#define DMA_CHAN_CTRL_ENABLE (1<<31)
-#define DMA_CHAN_CTRL_BUSY (1<<30)
-#define DMA_CHAN_CTRL_LINK (1<<29)
-
-#define DMA0_READY 0x114
-#define DMA1_READY 0x134
-#define DMA2_READY 0x154
-#define DMA3_READY 0x174
-#define DMA4_READY 0x194
-#define DMA_READY(chan) (DMA_BREG(DMA0_READY, chan))
-
-#define DMA_GLOBAL_REGISTER 0x908
-
-#define FIFO_SIZES 0xa00
-
-#define FIFO_CONTROL 0xa10
-#define FIFO_CONTROL_GRF_FLUSH (1<<4)
-#define FIFO_CONTROL_ITF_FLUSH (1<<3)
-#define FIFO_CONTROL_ATF_FLUSH (1<<2)
-
-#define FIFO_XMIT_THRESHOLD 0xa14
-
-#define DMA0_WORD0_CMP_VALUE 0xb00
-#define DMA1_WORD0_CMP_VALUE 0xb10
-#define DMA2_WORD0_CMP_VALUE 0xb20
-#define DMA3_WORD0_CMP_VALUE 0xb30
-#define DMA4_WORD0_CMP_VALUE 0xb40
-#define DMA_WORD0_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD0_CMP_VALUE, chan))
-
-#define DMA0_WORD0_CMP_ENABLE 0xb04
-#define DMA1_WORD0_CMP_ENABLE 0xb14
-#define DMA2_WORD0_CMP_ENABLE 0xb24
-#define DMA3_WORD0_CMP_ENABLE 0xb34
-#define DMA4_WORD0_CMP_ENABLE 0xb44
-#define DMA_WORD0_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD0_CMP_ENABLE,chan))
-
-#define DMA0_WORD1_CMP_VALUE 0xb08
-#define DMA1_WORD1_CMP_VALUE 0xb18
-#define DMA2_WORD1_CMP_VALUE 0xb28
-#define DMA3_WORD1_CMP_VALUE 0xb38
-#define DMA4_WORD1_CMP_VALUE 0xb48
-#define DMA_WORD1_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD1_CMP_VALUE, chan))
-
-#define DMA0_WORD1_CMP_ENABLE 0xb0c
-#define DMA1_WORD1_CMP_ENABLE 0xb1c
-#define DMA2_WORD1_CMP_ENABLE 0xb2c
-#define DMA3_WORD1_CMP_ENABLE 0xb3c
-#define DMA4_WORD1_CMP_ENABLE 0xb4c
-#define DMA_WORD1_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD1_CMP_ENABLE,chan))
-/* word 1 compare enable flags */
-#define DMA_WORD1_CMP_MATCH_OTHERBUS (1<<15)
-#define DMA_WORD1_CMP_MATCH_BROADCAST (1<<14)
-#define DMA_WORD1_CMP_MATCH_BUS_BCAST (1<<13)
-#define DMA_WORD1_CMP_MATCH_LOCAL_NODE (1<<12)
-#define DMA_WORD1_CMP_MATCH_EXACT (1<<11)
-#define DMA_WORD1_CMP_ENABLE_SELF_ID (1<<10)
-#define DMA_WORD1_CMP_ENABLE_MASTER (1<<8)
-
-#define LINK_ID 0xf00
-#define LINK_ID_BUS(id) (id<<22)
-#define LINK_ID_NODE(id) (id<<16)
-
-#define LINK_CONTROL 0xf04
-#define LINK_CONTROL_BUSY (1<<29)
-#define LINK_CONTROL_TX_ISO_EN (1<<26)
-#define LINK_CONTROL_RX_ISO_EN (1<<25)
-#define LINK_CONTROL_TX_ASYNC_EN (1<<24)
-#define LINK_CONTROL_RX_ASYNC_EN (1<<23)
-#define LINK_CONTROL_RESET_TX (1<<21)
-#define LINK_CONTROL_RESET_RX (1<<20)
-#define LINK_CONTROL_CYCMASTER (1<<11)
-#define LINK_CONTROL_CYCSOURCE (1<<10)
-#define LINK_CONTROL_CYCTIMEREN (1<<9)
-#define LINK_CONTROL_RCV_CMP_VALID (1<<7)
-#define LINK_CONTROL_SNOOP_ENABLE (1<<6)
-
-#define CYCLE_TIMER 0xf08
-
-#define LINK_PHY 0xf0c
-#define LINK_PHY_READ (1<<31)
-#define LINK_PHY_WRITE (1<<30)
-#define LINK_PHY_ADDR(addr) (addr<<24)
-#define LINK_PHY_WDATA(data) (data<<16)
-#define LINK_PHY_RADDR(addr) (addr<<8)
-
-
-#define LINK_INT_STATUS 0xf14
-#define LINK_INT_ENABLE 0xf18
-/* status and enable have identical bit numbers */
-#define LINK_INT_LINK_INT (1<<31)
-#define LINK_INT_PHY_TIMEOUT (1<<30)
-#define LINK_INT_PHY_REG_RCVD (1<<29)
-#define LINK_INT_PHY_BUSRESET (1<<28)
-#define LINK_INT_TX_RDY (1<<26)
-#define LINK_INT_RX_DATA_RDY (1<<25)
-#define LINK_INT_ISO_STUCK (1<<20)
-#define LINK_INT_ASYNC_STUCK (1<<19)
-#define LINK_INT_SENT_REJECT (1<<17)
-#define LINK_INT_HDR_ERR (1<<16)
-#define LINK_INT_TX_INVALID_TC (1<<15)
-#define LINK_INT_CYC_SECOND (1<<11)
-#define LINK_INT_CYC_START (1<<10)
-#define LINK_INT_CYC_DONE (1<<9)
-#define LINK_INT_CYC_PENDING (1<<8)
-#define LINK_INT_CYC_LOST (1<<7)
-#define LINK_INT_CYC_ARB_FAILED (1<<6)
-#define LINK_INT_GRF_OVERFLOW (1<<5)
-#define LINK_INT_ITF_UNDERFLOW (1<<4)
-#define LINK_INT_ATF_UNDERFLOW (1<<3)
-#define LINK_INT_ISOARB_FAILED (1<<0)
-
-/* PHY specifics */
-#define PHY_VENDORID_TI 0x800028
-#define PHY_PRODUCTID_TSB41LV03 0x000000
-
-
-/* this is the physical layout of a PCL, its size is 128 bytes */
-struct ti_pcl {
- u32 next;
- u32 async_error_next;
- u32 user_data;
- u32 pcl_status;
- u32 remaining_transfer_count;
- u32 next_data_buffer;
- struct {
- u32 control;
- u32 pointer;
- } buffer[13] __attribute__ ((packed));
-} __attribute__ ((packed));
-
-#include <linux/stddef.h>
-#define pcloffs(MEMBER) (offsetof(struct ti_pcl, MEMBER))
-
-
-static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- const struct ti_pcl *pcl)
-{
- memcpy_le32((u32 *)(lynx->pcl_mem + pclid * sizeof(struct ti_pcl)),
- (u32 *)pcl, sizeof(struct ti_pcl));
-}
-
-static inline void get_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- struct ti_pcl *pcl)
-{
- memcpy_le32((u32 *)pcl,
- (u32 *)(lynx->pcl_mem + pclid * sizeof(struct ti_pcl)),
- sizeof(struct ti_pcl));
-}
-
-static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid)
-{
- return lynx->pcl_mem_dma + pclid * sizeof(struct ti_pcl);
-}
-
-
-#if defined (__BIG_ENDIAN)
-typedef struct ti_pcl pcltmp_t;
-
-static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- pcltmp_t *tmp)
-{
- get_pcl(lynx, pclid, tmp);
- return tmp;
-}
-
-static inline void commit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- pcltmp_t *tmp)
-{
- put_pcl(lynx, pclid, tmp);
-}
-
-#else
-typedef int pcltmp_t; /* just a dummy */
-
-static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- pcltmp_t *tmp)
-{
- return lynx->pcl_mem + pclid * sizeof(struct ti_pcl);
-}
-
-static inline void commit_pcl(const struct ti_lynx *lynx, pcl_t pclid,
- pcltmp_t *tmp)
-{
-}
-#endif
-
-
-static inline void run_sub_pcl(const struct ti_lynx *lynx, pcl_t pclid, int idx,
- int dmachan)
-{
- reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20,
- pcl_bus(lynx, pclid) + idx * 4);
- reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20,
- DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK);
-}
-
-static inline void run_pcl(const struct ti_lynx *lynx, pcl_t pclid, int dmachan)
-{
- run_sub_pcl(lynx, pclid, 0, dmachan);
-}
-
-#define PCL_NEXT_INVALID (1<<0)
-
-/* transfer commands */
-#define PCL_CMD_RCV (0x1<<24)
-#define PCL_CMD_RCV_AND_UPDATE (0xa<<24)
-#define PCL_CMD_XMT (0x2<<24)
-#define PCL_CMD_UNFXMT (0xc<<24)
-#define PCL_CMD_PCI_TO_LBUS (0x8<<24)
-#define PCL_CMD_LBUS_TO_PCI (0x9<<24)
-
-/* aux commands */
-#define PCL_CMD_NOP (0x0<<24)
-#define PCL_CMD_LOAD (0x3<<24)
-#define PCL_CMD_STOREQ (0x4<<24)
-#define PCL_CMD_STORED (0xb<<24)
-#define PCL_CMD_STORE0 (0x5<<24)
-#define PCL_CMD_STORE1 (0x6<<24)
-#define PCL_CMD_COMPARE (0xe<<24)
-#define PCL_CMD_SWAP_COMPARE (0xf<<24)
-#define PCL_CMD_ADD (0xd<<24)
-#define PCL_CMD_BRANCH (0x7<<24)
-
-/* BRANCH condition codes */
-#define PCL_COND_DMARDY_SET (0x1<<20)
-#define PCL_COND_DMARDY_CLEAR (0x2<<20)
-
-#define PCL_GEN_INTR (1<<19)
-#define PCL_LAST_BUFF (1<<18)
-#define PCL_LAST_CMD (PCL_LAST_BUFF)
-#define PCL_WAITSTAT (1<<17)
-#define PCL_BIGENDIAN (1<<16)
-#define PCL_ISOMODE (1<<12)
-
-#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-07 22:05:00 +0000