summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/sbp2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ieee1394/sbp2.c')
-rw-r--r--drivers/ieee1394/sbp2.c85
1 files changed, 30 insertions, 55 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 5413dc43b9f..1d5ceb7ecc8 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -127,10 +127,12 @@ MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
* talking to a single sbp2 device at the same time (filesystem coherency,
* etc.). If you're running an sbp2 device that supports multiple logins,
* and you're either running read-only filesystems or some sort of special
- * filesystem supporting multiple hosts (one such filesystem is OpenGFS,
- * see opengfs.sourceforge.net for more info), then set exclusive_login
- * to zero. Note: The Oxsemi OXFW911 sbp2 chipset supports up to four
- * concurrent logins.
+ * filesystem supporting multiple hosts, e.g. OpenGFS, Oracle Cluster
+ * File System, or Lustre, then set exclusive_login to zero.
+ *
+ * So far only bridges from Oxford Semiconductor are known to support
+ * concurrent logins. Depending on firmware, four or two concurrent logins
+ * are possible on OXFW911 and newer Oxsemi bridges.
*/
static int exclusive_login = 1;
module_param(exclusive_login, int, 0644);
@@ -306,8 +308,9 @@ static const struct {
u32 model_id;
unsigned workarounds;
} sbp2_workarounds_table[] = {
- /* TSB42AA9 */ {
+ /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
.firmware_revision = 0x002800,
+ .model_id = 0x001010,
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
SBP2_WORKAROUND_MODE_SENSE_8,
},
@@ -791,12 +794,12 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
scsi_id->ud = ud;
scsi_id->speed_code = IEEE1394_SPEED_100;
scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
+ scsi_id->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
atomic_set(&scsi_id->sbp2_login_complete, 0);
INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse);
INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed);
INIT_LIST_HEAD(&scsi_id->scsi_list);
spin_lock_init(&scsi_id->sbp2_command_orb_lock);
- scsi_id->sbp2_lun = 0;
ud->device.driver_data = scsi_id;
@@ -844,8 +847,8 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
- 0x010000000000ULL, CSR1212_ALL_SPACE_END);
- if (scsi_id->status_fifo_addr == ~0ULL) {
+ ud->ne->host->low_addr_space, CSR1212_ALL_SPACE_END);
+ if (scsi_id->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}
@@ -1087,9 +1090,9 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
SBP2_DMA_FREE("single query logins data");
}
- if (scsi_id->status_fifo_addr)
+ if (scsi_id->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE)
hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
- scsi_id->status_fifo_addr);
+ scsi_id->status_fifo_addr);
scsi_id->ud->device.driver_data = NULL;
@@ -1213,13 +1216,11 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
SBP2_DEBUG("length_max_logins = %x",
(unsigned int)scsi_id->query_logins_response->length_max_logins);
- SBP2_DEBUG("Query logins to SBP-2 device successful");
-
max_logins = RESPONSE_GET_MAX_LOGINS(scsi_id->query_logins_response->length_max_logins);
- SBP2_DEBUG("Maximum concurrent logins supported: %d", max_logins);
+ SBP2_INFO("Maximum concurrent logins supported: %d", max_logins);
active_logins = RESPONSE_GET_ACTIVE_LOGINS(scsi_id->query_logins_response->length_max_logins);
- SBP2_DEBUG("Number of active logins: %d", active_logins);
+ SBP2_INFO("Number of active logins: %d", active_logins);
if (active_logins >= max_logins) {
return -EIO;
@@ -1648,6 +1649,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
}
}
+#define SBP2_PAYLOAD_TO_BYTES(p) (1 << ((p) + 2))
+
/*
* This function is called in order to determine the max speed and packet
* size we can use in our ORBs. Note, that we (the driver and host) only
@@ -1660,13 +1663,12 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
+ u8 payload;
SBP2_DEBUG_ENTER();
- /* Initial setting comes from the hosts speed map */
scsi_id->speed_code =
- hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 +
- NODEID_TO_NODE(scsi_id->ne->nodeid)];
+ hi->host->speed[NODEID_TO_NODE(scsi_id->ne->nodeid)];
/* Bump down our speed if the user requested it */
if (scsi_id->speed_code > max_speed) {
@@ -1677,15 +1679,22 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
/* Payload size is the lesser of what our speed supports and what
* our host supports. */
- scsi_id->max_payload_size =
- min(sbp2_speedto_max_payload[scsi_id->speed_code],
- (u8) (hi->host->csr.max_rec - 1));
+ payload = min(sbp2_speedto_max_payload[scsi_id->speed_code],
+ (u8) (hi->host->csr.max_rec - 1));
+
+ /* If physical DMA is off, work around limitation in ohci1394:
+ * packet size must not exceed PAGE_SIZE */
+ if (scsi_id->ne->host->low_addr_space < (1ULL << 32))
+ while (SBP2_PAYLOAD_TO_BYTES(payload) + 24 > PAGE_SIZE &&
+ payload)
+ payload--;
HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]",
NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid),
hpsb_speedto_str[scsi_id->speed_code],
- 1 << ((u32) scsi_id->max_payload_size + 2));
+ SBP2_PAYLOAD_TO_BYTES(payload));
+ scsi_id->max_payload_size = payload;
return 0;
}
@@ -2113,33 +2122,6 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
}
/*
- * This function is called after a command is completed, in order to do any necessary SBP-2
- * response data translations for the SCSI stack
- */
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
- struct scsi_cmnd *SCpnt)
-{
- u8 *scsi_buf = SCpnt->request_buffer;
-
- SBP2_DEBUG_ENTER();
-
- if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
- /*
- * Make sure data length is ok. Minimum length is 36 bytes
- */
- if (scsi_buf[4] == 0) {
- scsi_buf[4] = 36 - 5;
- }
-
- /*
- * Fix ansi revision and response data format
- */
- scsi_buf[2] |= 2;
- scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
- }
-}
-
-/*
* This function deals with status writes from the SBP-2 device
*/
static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
@@ -2478,13 +2460,6 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
}
/*
- * Take care of any sbp2 response data mucking here (RBC stuff, etc.)
- */
- if (SCpnt->result == DID_OK << 16) {
- sbp2_check_sbp2_response(scsi_id, SCpnt);
- }
-
- /*
* If a bus reset is in progress and there was an error, complete
* the command as busy so that it will get retried.
*/