diff options
Diffstat (limited to 'drivers/ieee1394/sbp2.h')
| -rw-r--r-- | drivers/ieee1394/sbp2.h | 484 |
1 files changed, 484 insertions, 0 deletions
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h new file mode 100644 index 00000000000..a84b039a05b --- /dev/null +++ b/drivers/ieee1394/sbp2.h @@ -0,0 +1,484 @@ +/* + * sbp2.h - Defines and prototypes for sbp2.c + * + * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com) + * jamesg@filanet.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef SBP2_H +#define SBP2_H + +#define SBP2_DEVICE_NAME "sbp2" + +/* + * SBP2 specific structures and defines + */ + +#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0 +#define ORB_DIRECTION_READ_FROM_MEDIA 0x1 +#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 + +#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31) +#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) +#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ +#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16) +#define ORB_SET_DATA_SIZE(value) (value & 0xffff) +#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) +#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) +#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) +#define ORB_SET_SPEED(value) ((value & 0x7) << 24) +#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) + +struct sbp2_command_orb { + volatile u32 next_ORB_hi; + volatile u32 next_ORB_lo; + u32 data_descriptor_hi; + u32 data_descriptor_lo; + u32 misc; + u8 cdb[12]; +}; + +#define SBP2_LOGIN_REQUEST 0x0 +#define SBP2_QUERY_LOGINS_REQUEST 0x1 +#define SBP2_RECONNECT_REQUEST 0x3 +#define SBP2_SET_PASSWORD_REQUEST 0x4 +#define SBP2_LOGOUT_REQUEST 0x7 +#define SBP2_ABORT_TASK_REQUEST 0xb +#define SBP2_ABORT_TASK_SET 0xc +#define SBP2_LOGICAL_UNIT_RESET 0xe +#define SBP2_TARGET_RESET_REQUEST 0xf + +#define ORB_SET_LUN(value) (value & 0xffff) +#define ORB_SET_FUNCTION(value) ((value & 0xf) << 16) +#define ORB_SET_RECONNECT(value) ((value & 0xf) << 20) +#define ORB_SET_EXCLUSIVE(value) ((value & 0x1) << 28) +#define ORB_SET_LOGIN_RESP_LENGTH(value) (value & 0xffff) +#define ORB_SET_PASSWD_LENGTH(value) ((value & 0xffff) << 16) + +struct sbp2_login_orb { + u32 password_hi; + u32 password_lo; + u32 login_response_hi; + u32 login_response_lo; + u32 lun_misc; + u32 passwd_resp_lengths; + u32 status_FIFO_hi; + u32 status_FIFO_lo; +}; + +#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff) +#define RESPONSE_GET_LENGTH(value) ((value >> 16) & 0xffff) +#define RESPONSE_GET_RECONNECT_HOLD(value) (value & 0xffff) + +struct sbp2_login_response { + u32 length_login_ID; + u32 command_block_agent_hi; + u32 command_block_agent_lo; + u32 reconnect_hold; +}; + +#define ORB_SET_LOGIN_ID(value) (value & 0xffff) + +#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff) + +struct sbp2_query_logins_orb { + u32 reserved1; + u32 reserved2; + u32 query_response_hi; + u32 query_response_lo; + u32 lun_misc; + u32 reserved_resp_length; + u32 status_FIFO_hi; + u32 status_FIFO_lo; +}; + +#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff) +#define RESPONSE_GET_ACTIVE_LOGINS(value) ((RESPONSE_GET_LENGTH(value) - 4) / 12) + +struct sbp2_query_logins_response { + u32 length_max_logins; + u32 misc_IDs; + u32 initiator_misc_hi; + u32 initiator_misc_lo; +}; + +struct sbp2_reconnect_orb { + u32 reserved1; + u32 reserved2; + u32 reserved3; + u32 reserved4; + u32 login_ID_misc; + u32 reserved5; + u32 status_FIFO_hi; + u32 status_FIFO_lo; +}; + +struct sbp2_logout_orb { + u32 reserved1; + u32 reserved2; + u32 reserved3; + u32 reserved4; + u32 login_ID_misc; + u32 reserved5; + u32 status_FIFO_hi; + u32 status_FIFO_lo; +}; + +#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff) +#define PAGE_TABLE_SET_SEGMENT_LENGTH(value) ((value & 0xffff) << 16) + +struct sbp2_unrestricted_page_table { + u32 length_segment_base_hi; + u32 segment_base_lo; +}; + +#define RESP_STATUS_REQUEST_COMPLETE 0x0 +#define RESP_STATUS_TRANSPORT_FAILURE 0x1 +#define RESP_STATUS_ILLEGAL_REQUEST 0x2 +#define RESP_STATUS_VENDOR_DEPENDENT 0x3 + +#define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0 +#define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1 +#define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2 +#define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3 +#define SBP2_STATUS_ACCESS_DENIED 0x4 +#define SBP2_STATUS_LU_NOT_SUPPORTED 0x5 +#define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6 +#define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8 +#define SBP2_STATUS_FUNCTION_REJECTED 0x9 +#define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa +#define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb +#define SBP2_STATUS_REQUEST_ABORTED 0xc +#define SBP2_STATUS_UNSPECIFIED_ERROR 0xff + +#define SFMT_CURRENT_ERROR 0x0 +#define SFMT_DEFERRED_ERROR 0x1 +#define SFMT_VENDOR_DEPENDENT_STATUS 0x3 + +#define SBP2_SCSI_STATUS_GOOD 0x0 +#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2 +#define SBP2_SCSI_STATUS_CONDITION_MET 0x4 +#define SBP2_SCSI_STATUS_BUSY 0x8 +#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18 +#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22 + +#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff + +#define STATUS_GET_ORB_OFFSET_HI(value) (value & 0xffff) +#define STATUS_GET_SBP_STATUS(value) ((value >> 16) & 0xff) +#define STATUS_GET_LENGTH(value) ((value >> 24) & 0x7) +#define STATUS_GET_DEAD_BIT(value) ((value >> 27) & 0x1) +#define STATUS_GET_RESP(value) ((value >> 28) & 0x3) +#define STATUS_GET_SRC(value) ((value >> 30) & 0x3) + +struct sbp2_status_block { + u32 ORB_offset_hi_misc; + u32 ORB_offset_lo; + u8 command_set_dependent[24]; +}; + +/* + * Miscellaneous SBP2 related config rom defines + */ + +/* The status fifo address definition below is used as a base for each + * node, which a chunk seperately assigned to each unit directory in the + * node. For example, 0xfffe00000000ULL is used for the first sbp2 device + * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node + * 0, and so on. + * + * Note: We could use a single status fifo address for all sbp2 devices, + * and figure out which sbp2 device the status belongs to by looking at + * the source node id of the status write... but, using separate addresses + * for each sbp2 unit directory allows for better code and the ability to + * support multiple luns within a single 1394 node. + * + * Also note that we choose the address range below as it is a region + * specified for write posting, where the ohci controller will + * automatically send an ack_complete when the status is written by the + * sbp2 device... saving a split transaction. =) + */ +#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL +#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe +#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0 + +#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5) +#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5) + +#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 +#define SBP2_CSR_OFFSET_KEY 0x54 +#define SBP2_UNIT_SPEC_ID_KEY 0x12 +#define SBP2_UNIT_SW_VERSION_KEY 0x13 +#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38 +#define SBP2_COMMAND_SET_KEY 0x39 +#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a +#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14 +#define SBP2_FIRMWARE_REVISION_KEY 0x3c + +#define SBP2_DEVICE_TYPE(q) (((q) >> 16) & 0x1f) +#define SBP2_DEVICE_LUN(q) ((q) & 0xffff) + +#define SBP2_AGENT_STATE_OFFSET 0x00ULL +#define SBP2_AGENT_RESET_OFFSET 0x04ULL +#define SBP2_ORB_POINTER_OFFSET 0x08ULL +#define SBP2_DOORBELL_OFFSET 0x10ULL +#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL +#define SBP2_UNSOLICITED_STATUS_VALUE 0xf + +#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL +#define SBP2_BUSY_TIMEOUT_VALUE 0xf + +#define SBP2_AGENT_RESET_DATA 0xf + +/* + * Unit spec id and sw version entry for SBP-2 devices + */ + +#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e +#define SBP2_SW_VERSION_ENTRY 0x00010483 + +/* + * Other misc defines + */ +#define SBP2_128KB_BROKEN_FIRMWARE 0xa0b800 + +#define SBP2_DEVICE_TYPE_LUN_UNINITIALIZED 0xffffffff + +/* + * SCSI specific stuff + */ + +#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 +#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */ +#define SBP2_MAX_SECTORS 255 /* Max sectors supported */ + +#ifndef TYPE_SDAD +#define TYPE_SDAD 0x0e /* simplified direct access device */ +#endif + +/* + * SCSI direction table... + * (now used as a back-up in case the direction passed down from above is "unknown") + * + * DIN = IN data direction + * DOU = OUT data direction + * DNO = No data transfer + * DUN = Unknown data direction + * + * Opcode 0xec (Teac specific "opc execute") possibly should be DNO, + * but we'll change it when somebody reports a problem with this. + */ +#define DIN ORB_DIRECTION_READ_FROM_MEDIA +#define DOU ORB_DIRECTION_WRITE_TO_MEDIA +#define DNO ORB_DIRECTION_NO_DATA_TRANSFER +#define DUN DIN + +static unchar sbp2scsi_direction_table[0x100] = { + DNO,DNO,DIN,DIN,DOU,DIN,DIN,DOU,DIN,DUN,DOU,DOU,DUN,DUN,DUN,DIN, + DNO,DIN,DIN,DOU,DIN,DOU,DNO,DNO,DOU,DNO,DIN,DNO,DIN,DOU,DNO,DUN, + DIN,DUN,DIN,DIN,DOU,DIN,DUN,DUN,DIN,DIN,DOU,DNO,DUN,DIN,DOU,DOU, + DOU,DOU,DOU,DNO,DIN,DNO,DNO,DIN,DOU,DOU,DOU,DOU,DIN,DOU,DIN,DOU, + DOU,DOU,DIN,DIN,DIN,DNO,DIN,DNO,DNO,DNO,DUN,DNO,DOU,DIN,DNO,DUN, + DUN,DIN,DIN,DNO,DNO,DOU,DUN,DUN,DNO,DIN,DIN,DNO,DIN,DOU,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN, + DUN,DNO,DOU,DOU,DIN,DNO,DNO,DNO,DIN,DNO,DOU,DUN,DNO,DIN,DOU,DOU, + DOU,DOU,DOU,DNO,DUN,DIN,DOU,DIN,DIN,DIN,DNO,DNO,DNO,DIN,DIN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DOU,DUN,DUN,DUN,DUN,DUN, + DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN,DUN +}; + +/* This should be safe */ +#define SBP2_MAX_CMDS 8 + +/* This is the two dma types we use for cmd_dma below */ +enum cmd_dma_types { + CMD_DMA_NONE, + CMD_DMA_PAGE, + CMD_DMA_SINGLE +}; + +/* + * Encapsulates all the info necessary for an outstanding command. + */ +struct sbp2_command_info { + + struct list_head list; + struct sbp2_command_orb command_orb ____cacheline_aligned; + dma_addr_t command_orb_dma ____cacheline_aligned; + struct scsi_cmnd *Current_SCpnt; + void (*Current_done)(struct scsi_cmnd *); + + /* Also need s/g structure for each sbp2 command */ + struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned; + dma_addr_t sge_dma ____cacheline_aligned; + void *sge_buffer; + dma_addr_t cmd_dma; + enum cmd_dma_types dma_type; + unsigned long dma_size; + int dma_dir; + +}; + +/* A list of flags for detected oddities and brokeness. */ +#define SBP2_BREAKAGE_128K_MAX_TRANSFER 0x1 +#define SBP2_BREAKAGE_INQUIRY_HACK 0x2 + + +struct sbp2scsi_host_info; + + +/* + * Information needed on a per scsi id basis (one for each sbp2 device) + */ +struct scsi_id_instance_data { + /* + * Various sbp2 specific structures + */ + struct sbp2_command_orb *last_orb; + dma_addr_t last_orb_dma; + struct sbp2_login_orb *login_orb; + dma_addr_t login_orb_dma; + struct sbp2_login_response *login_response; + dma_addr_t login_response_dma; + struct sbp2_query_logins_orb *query_logins_orb; + dma_addr_t query_logins_orb_dma; + struct sbp2_query_logins_response *query_logins_response; + dma_addr_t query_logins_response_dma; + struct sbp2_reconnect_orb *reconnect_orb; + dma_addr_t reconnect_orb_dma; + struct sbp2_logout_orb *logout_orb; + dma_addr_t logout_orb_dma; + struct sbp2_status_block status_block; + + /* + * Stuff we need to know about the sbp2 device itself + */ + u64 sbp2_management_agent_addr; + u64 sbp2_command_block_agent_addr; + u32 speed_code; + u32 max_payload_size; + + /* + * Values pulled from the device's unit directory + */ + u32 sbp2_command_set_spec_id; + u32 sbp2_command_set; + u32 sbp2_unit_characteristics; + u32 sbp2_device_type_and_lun; + u32 sbp2_firmware_revision; + + /* + * Variable used for logins, reconnects, logouts, query logins + */ + atomic_t sbp2_login_complete; + + /* + * Pool of command orbs, so we can have more than overlapped command per id + */ + spinlock_t sbp2_command_orb_lock; + struct list_head sbp2_command_orb_inuse; + struct list_head sbp2_command_orb_completed; + + struct list_head scsi_list; + + /* Node entry, as retrieved from NodeMgr entries */ + struct node_entry *ne; + struct unit_directory *ud; + + /* A backlink to our host_info */ + struct sbp2scsi_host_info *hi; + + /* SCSI related pointers */ + struct scsi_device *sdev; + struct Scsi_Host *scsi_host; + + /* Device specific workarounds/brokeness */ + u32 workarounds; +}; + + +/* Sbp2 host data structure (one per IEEE1394 host) */ +struct sbp2scsi_host_info { + struct hpsb_host *host; /* IEEE1394 host */ + struct list_head scsi_ids; /* List of scsi ids on this host */ +}; + +/* + * Function prototypes + */ + +/* + * Various utility prototypes + */ +static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id); +static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id); +static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb); +static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt); +static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id, + struct scsi_cmnd *Current_SCpnt, + void (*Current_done)(struct scsi_cmnd *)); +static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, + struct sbp2_command_info *command); + + +static int sbp2_start_device(struct scsi_id_instance_data *scsi_id); +static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id); + +#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA +static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, + u64 addr, size_t length, u16 flags); +static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data, + u64 addr, size_t length, u16 flags); +#endif + +/* + * SBP-2 protocol related prototypes + */ +static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id); +static int sbp2_login_device(struct scsi_id_instance_data *scsi_id); +static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id); +static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id); +static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid, + quadlet_t *data, u64 addr, size_t length, u16 flags); +static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait); +static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, + struct sbp2_command_info *command, + unchar *scsi_cmd, + unsigned int scsi_use_sg, + unsigned int scsi_request_bufflen, + void *scsi_request_buffer, + enum dma_data_direction dma_dir); +static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, + struct sbp2_command_info *command); +static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, + struct scsi_cmnd *SCpnt, + void (*done)(struct scsi_cmnd *)); +static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data); +static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd); +static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, + struct scsi_cmnd *SCpnt); +static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, + struct unit_directory *ud); +static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id); +static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id); + +#endif /* SBP2_H */ |