diff options
Diffstat (limited to 'drivers/ieee1394/sbp2.h')
-rw-r--r-- | drivers/ieee1394/sbp2.h | 346 |
1 files changed, 0 insertions, 346 deletions
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h deleted file mode 100644 index 64a3a66a8a3..00000000000 --- a/drivers/ieee1394/sbp2.h +++ /dev/null @@ -1,346 +0,0 @@ -/* - * sbp2.h - Defines and prototypes for sbp2.c - * - * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com) - * jamesg@filanet.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef SBP2_H -#define SBP2_H - -#define SBP2_DEVICE_NAME "sbp2" - -/* - * There is no transport protocol limit to the CDB length, but we implement - * a fixed length only. 16 bytes is enough for disks larger than 2 TB. - */ -#define SBP2_MAX_CDB_SIZE 16 - -/* - * SBP-2 specific definitions - */ - -#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0 -#define ORB_DIRECTION_READ_FROM_MEDIA 0x1 -#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 - -#define ORB_SET_NULL_PTR(v) (((v) & 0x1) << 31) -#define ORB_SET_NOTIFY(v) (((v) & 0x1) << 31) -#define ORB_SET_RQ_FMT(v) (((v) & 0x3) << 29) -#define ORB_SET_NODE_ID(v) (((v) & 0xffff) << 16) -#define ORB_SET_STATUS_FIFO_HI(v, id) ((v) >> 32 | ORB_SET_NODE_ID(id)) -#define ORB_SET_STATUS_FIFO_LO(v) ((v) & 0xffffffff) -#define ORB_SET_DATA_SIZE(v) ((v) & 0xffff) -#define ORB_SET_PAGE_SIZE(v) (((v) & 0x7) << 16) -#define ORB_SET_PAGE_TABLE_PRESENT(v) (((v) & 0x1) << 19) -#define ORB_SET_MAX_PAYLOAD(v) (((v) & 0xf) << 20) -#define ORB_SET_SPEED(v) (((v) & 0x7) << 24) -#define ORB_SET_DIRECTION(v) (((v) & 0x1) << 27) - -struct sbp2_command_orb { - u32 next_ORB_hi; - u32 next_ORB_lo; - u32 data_descriptor_hi; - u32 data_descriptor_lo; - u32 misc; - u8 cdb[SBP2_MAX_CDB_SIZE]; -} __attribute__((packed)); - -#define SBP2_LOGIN_REQUEST 0x0 -#define SBP2_QUERY_LOGINS_REQUEST 0x1 -#define SBP2_RECONNECT_REQUEST 0x3 -#define SBP2_SET_PASSWORD_REQUEST 0x4 -#define SBP2_LOGOUT_REQUEST 0x7 -#define SBP2_ABORT_TASK_REQUEST 0xb -#define SBP2_ABORT_TASK_SET 0xc -#define SBP2_LOGICAL_UNIT_RESET 0xe -#define SBP2_TARGET_RESET_REQUEST 0xf - -#define ORB_SET_LUN(v) ((v) & 0xffff) -#define ORB_SET_FUNCTION(v) (((v) & 0xf) << 16) -#define ORB_SET_RECONNECT(v) (((v) & 0xf) << 20) -#define ORB_SET_EXCLUSIVE(v) ((v) ? 1 << 28 : 0) -#define ORB_SET_LOGIN_RESP_LENGTH(v) ((v) & 0xffff) -#define ORB_SET_PASSWD_LENGTH(v) (((v) & 0xffff) << 16) - -struct sbp2_login_orb { - u32 password_hi; - u32 password_lo; - u32 login_response_hi; - u32 login_response_lo; - u32 lun_misc; - u32 passwd_resp_lengths; - u32 status_fifo_hi; - u32 status_fifo_lo; -} __attribute__((packed)); - -#define RESPONSE_GET_LOGIN_ID(v) ((v) & 0xffff) -#define RESPONSE_GET_LENGTH(v) (((v) >> 16) & 0xffff) -#define RESPONSE_GET_RECONNECT_HOLD(v) ((v) & 0xffff) - -struct sbp2_login_response { - u32 length_login_ID; - u32 command_block_agent_hi; - u32 command_block_agent_lo; - u32 reconnect_hold; -} __attribute__((packed)); - -#define ORB_SET_LOGIN_ID(v) ((v) & 0xffff) -#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff) - -struct sbp2_query_logins_orb { - u32 reserved1; - u32 reserved2; - u32 query_response_hi; - u32 query_response_lo; - u32 lun_misc; - u32 reserved_resp_length; - u32 status_fifo_hi; - u32 status_fifo_lo; -} __attribute__((packed)); - -#define RESPONSE_GET_MAX_LOGINS(v) ((v) & 0xffff) -#define RESPONSE_GET_ACTIVE_LOGINS(v) ((RESPONSE_GET_LENGTH((v)) - 4) / 12) - -struct sbp2_query_logins_response { - u32 length_max_logins; - u32 misc_IDs; - u32 initiator_misc_hi; - u32 initiator_misc_lo; -} __attribute__((packed)); - -struct sbp2_reconnect_orb { - u32 reserved1; - u32 reserved2; - u32 reserved3; - u32 reserved4; - u32 login_ID_misc; - u32 reserved5; - u32 status_fifo_hi; - u32 status_fifo_lo; -} __attribute__((packed)); - -struct sbp2_logout_orb { - u32 reserved1; - u32 reserved2; - u32 reserved3; - u32 reserved4; - u32 login_ID_misc; - u32 reserved5; - u32 status_fifo_hi; - u32 status_fifo_lo; -} __attribute__((packed)); - -struct sbp2_unrestricted_page_table { - __be32 high; - __be32 low; -}; - -#define RESP_STATUS_REQUEST_COMPLETE 0x0 -#define RESP_STATUS_TRANSPORT_FAILURE 0x1 -#define RESP_STATUS_ILLEGAL_REQUEST 0x2 -#define RESP_STATUS_VENDOR_DEPENDENT 0x3 - -#define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0 -#define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1 -#define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2 -#define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3 -#define SBP2_STATUS_ACCESS_DENIED 0x4 -#define SBP2_STATUS_LU_NOT_SUPPORTED 0x5 -#define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6 -#define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8 -#define SBP2_STATUS_FUNCTION_REJECTED 0x9 -#define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa -#define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb -#define SBP2_STATUS_REQUEST_ABORTED 0xc -#define SBP2_STATUS_UNSPECIFIED_ERROR 0xff - -#define SFMT_CURRENT_ERROR 0x0 -#define SFMT_DEFERRED_ERROR 0x1 -#define SFMT_VENDOR_DEPENDENT_STATUS 0x3 - -#define STATUS_GET_SRC(v) (((v) >> 30) & 0x3) -#define STATUS_GET_RESP(v) (((v) >> 28) & 0x3) -#define STATUS_GET_LEN(v) (((v) >> 24) & 0x7) -#define STATUS_GET_SBP_STATUS(v) (((v) >> 16) & 0xff) -#define STATUS_GET_ORB_OFFSET_HI(v) ((v) & 0x0000ffff) -#define STATUS_TEST_DEAD(v) ((v) & 0x08000000) -/* test 'resp' | 'dead' | 'sbp2_status' */ -#define STATUS_TEST_RDS(v) ((v) & 0x38ff0000) - -struct sbp2_status_block { - u32 ORB_offset_hi_misc; - u32 ORB_offset_lo; - u8 command_set_dependent[24]; -} __attribute__((packed)); - - -/* - * SBP2 related configuration ROM definitions - */ - -#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 -#define SBP2_CSR_OFFSET_KEY 0x54 -#define SBP2_UNIT_SPEC_ID_KEY 0x12 -#define SBP2_UNIT_SW_VERSION_KEY 0x13 -#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38 -#define SBP2_COMMAND_SET_KEY 0x39 -#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a -#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14 -#define SBP2_FIRMWARE_REVISION_KEY 0x3c - -#define SBP2_AGENT_STATE_OFFSET 0x00ULL -#define SBP2_AGENT_RESET_OFFSET 0x04ULL -#define SBP2_ORB_POINTER_OFFSET 0x08ULL -#define SBP2_DOORBELL_OFFSET 0x10ULL -#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL -#define SBP2_UNSOLICITED_STATUS_VALUE 0xf - -#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL -/* biggest possible value for Single Phase Retry count is 0xf */ -#define SBP2_BUSY_TIMEOUT_VALUE 0xf - -#define SBP2_AGENT_RESET_DATA 0xf - -#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e -#define SBP2_SW_VERSION_ENTRY 0x00010483 - -/* - * The default maximum s/g segment size of a FireWire controller is - * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to - * be quadlet-aligned, we set the length limit to 0xffff & ~3. - */ -#define SBP2_MAX_SEG_SIZE 0xfffc - -/* - * There is no real limitation of the queue depth (i.e. length of the linked - * list of command ORBs) at the target. The chosen depth is merely an - * implementation detail of the sbp2 driver. - */ -#define SBP2_MAX_CMDS 8 - -#define SBP2_SCSI_STATUS_GOOD 0x0 -#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2 -#define SBP2_SCSI_STATUS_CONDITION_MET 0x4 -#define SBP2_SCSI_STATUS_BUSY 0x8 -#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18 -#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22 -#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff - - -/* - * Representations of commands and devices - */ - -/* Per SCSI command */ -struct sbp2_command_info { - struct list_head list; - struct sbp2_command_orb command_orb; - dma_addr_t command_orb_dma; - struct scsi_cmnd *Current_SCpnt; - void (*Current_done)(struct scsi_cmnd *); - - /* Also need s/g structure for each sbp2 command */ - struct sbp2_unrestricted_page_table - scatter_gather_element[SG_ALL] __attribute__((aligned(8))); - dma_addr_t sge_dma; -}; - -/* Per FireWire host */ -struct sbp2_fwhost_info { - struct hpsb_host *host; - struct list_head logical_units; -}; - -/* Per logical unit */ -struct sbp2_lu { - /* Operation request blocks */ - struct sbp2_command_orb *last_orb; - dma_addr_t last_orb_dma; - struct sbp2_login_orb *login_orb; - dma_addr_t login_orb_dma; - struct sbp2_login_response *login_response; - dma_addr_t login_response_dma; - struct sbp2_query_logins_orb *query_logins_orb; - dma_addr_t query_logins_orb_dma; - struct sbp2_query_logins_response *query_logins_response; - dma_addr_t query_logins_response_dma; - struct sbp2_reconnect_orb *reconnect_orb; - dma_addr_t reconnect_orb_dma; - struct sbp2_logout_orb *logout_orb; - dma_addr_t logout_orb_dma; - struct sbp2_status_block status_block; - - /* How to talk to the unit */ - u64 management_agent_addr; - u64 command_block_agent_addr; - u32 speed_code; - u32 max_payload_size; - u16 lun; - - /* Address for the unit to write status blocks to */ - u64 status_fifo_addr; - - /* Waitqueue flag for logins, reconnects, logouts, query logins */ - unsigned int access_complete:1; - - /* Pool of command ORBs for this logical unit */ - spinlock_t cmd_orb_lock; - struct list_head cmd_orb_inuse; - struct list_head cmd_orb_completed; - - /* Backlink to FireWire host; list of units attached to the host */ - struct sbp2_fwhost_info *hi; - struct list_head lu_list; - - /* IEEE 1394 core's device representations */ - struct node_entry *ne; - struct unit_directory *ud; - - /* SCSI core's device representations */ - struct scsi_device *sdev; - struct Scsi_Host *shost; - - /* Device specific workarounds/brokeness */ - unsigned workarounds; - - /* Connection state */ - atomic_t state; - - /* For deferred requests to the fetch agent */ - struct work_struct protocol_work; -}; - -/* For use in sbp2_lu.state */ -enum sbp2lu_state_types { - SBP2LU_STATE_RUNNING, /* all normal */ - SBP2LU_STATE_IN_RESET, /* between bus reset and reconnect */ - SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */ -}; - -/* For use in sbp2_lu.workarounds and in the corresponding - * module load parameter */ -#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 -#define SBP2_WORKAROUND_INQUIRY_36 0x2 -#define SBP2_WORKAROUND_MODE_SENSE_8 0x4 -#define SBP2_WORKAROUND_FIX_CAPACITY 0x8 -#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10 -#define SBP2_INQUIRY_DELAY 12 -#define SBP2_WORKAROUND_POWER_CONDITION 0x20 -#define SBP2_WORKAROUND_OVERRIDE 0x100 - -#endif /* SBP2_H */ |