diff options
Diffstat (limited to 'drivers/iio/accel/kxcjk-1013.c')
| -rw-r--r-- | drivers/iio/accel/kxcjk-1013.c | 764 |
1 files changed, 764 insertions, 0 deletions
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c new file mode 100644 index 00000000000..7941cf2d31e --- /dev/null +++ b/drivers/iio/accel/kxcjk-1013.c @@ -0,0 +1,764 @@ +/* + * KXCJK-1013 3-axis accelerometer driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/accel/kxcjk_1013.h> + +#define KXCJK1013_DRV_NAME "kxcjk1013" +#define KXCJK1013_IRQ_NAME "kxcjk1013_event" + +#define KXCJK1013_REG_XOUT_L 0x06 +/* + * From low byte X axis register, all the other addresses of Y and Z can be + * obtained by just applying axis offset. The following axis defines are just + * provide clarity, but not used. + */ +#define KXCJK1013_REG_XOUT_H 0x07 +#define KXCJK1013_REG_YOUT_L 0x08 +#define KXCJK1013_REG_YOUT_H 0x09 +#define KXCJK1013_REG_ZOUT_L 0x0A +#define KXCJK1013_REG_ZOUT_H 0x0B + +#define KXCJK1013_REG_DCST_RESP 0x0C +#define KXCJK1013_REG_WHO_AM_I 0x0F +#define KXCJK1013_REG_INT_SRC1 0x16 +#define KXCJK1013_REG_INT_SRC2 0x17 +#define KXCJK1013_REG_STATUS_REG 0x18 +#define KXCJK1013_REG_INT_REL 0x1A +#define KXCJK1013_REG_CTRL1 0x1B +#define KXCJK1013_REG_CTRL2 0x1D +#define KXCJK1013_REG_INT_CTRL1 0x1E +#define KXCJK1013_REG_INT_CTRL2 0x1F +#define KXCJK1013_REG_DATA_CTRL 0x21 +#define KXCJK1013_REG_WAKE_TIMER 0x29 +#define KXCJK1013_REG_SELF_TEST 0x3A +#define KXCJK1013_REG_WAKE_THRES 0x6A + +#define KXCJK1013_REG_CTRL1_BIT_PC1 BIT(7) +#define KXCJK1013_REG_CTRL1_BIT_RES BIT(6) +#define KXCJK1013_REG_CTRL1_BIT_DRDY BIT(5) +#define KXCJK1013_REG_CTRL1_BIT_GSEL1 BIT(4) +#define KXCJK1013_REG_CTRL1_BIT_GSEL0 BIT(3) +#define KXCJK1013_REG_CTRL1_BIT_WUFE BIT(1) +#define KXCJK1013_REG_INT_REG1_BIT_IEA BIT(4) +#define KXCJK1013_REG_INT_REG1_BIT_IEN BIT(5) + +#define KXCJK1013_DATA_MASK_12_BIT 0x0FFF +#define KXCJK1013_MAX_STARTUP_TIME_US 100000 + +struct kxcjk1013_data { + struct i2c_client *client; + struct iio_trigger *trig; + bool trig_mode; + struct mutex mutex; + s16 buffer[8]; + int power_state; + u8 odr_bits; + bool active_high_intr; +}; + +enum kxcjk1013_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, +}; + +enum kxcjk1013_mode { + STANDBY, + OPERATION, +}; + +static const struct { + int val; + int val2; + int odr_bits; +} samp_freq_table[] = { {0, 781000, 0x08}, {1, 563000, 0x09}, + {3, 125000, 0x0A}, {6, 250000, 0x0B}, {12, 500000, 0}, + {25, 0, 0x01}, {50, 0, 0x02}, {100, 0, 0x03}, + {200, 0, 0x04}, {400, 0, 0x05}, {800, 0, 0x06}, + {1600, 0, 0x07} }; + +/* Refer to section 4 of the specification */ +static const struct { + int odr_bits; + int usec; +} odr_start_up_times[] = { {0x08, 100000}, {0x09, 100000}, {0x0A, 100000}, + {0x0B, 100000}, { 0, 80000}, {0x01, 41000}, + {0x02, 21000}, {0x03, 11000}, {0x04, 6400}, + {0x05, 3900}, {0x06, 2700}, {0x07, 2100} }; + +static int kxcjk1013_set_mode(struct kxcjk1013_data *data, + enum kxcjk1013_mode mode) +{ + int ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); + return ret; + } + + if (mode == STANDBY) + ret &= ~KXCJK1013_REG_CTRL1_BIT_PC1; + else + ret |= KXCJK1013_REG_CTRL1_BIT_PC1; + + ret = i2c_smbus_write_byte_data(data->client, + KXCJK1013_REG_CTRL1, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); + return ret; + } + + return 0; +} + +static int kxcjk1013_chip_init(struct kxcjk1013_data *data) +{ + int ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading who_am_i\n"); + return ret; + } + + dev_dbg(&data->client->dev, "KXCJK1013 Chip Id %x\n", ret); + + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); + return ret; + } + + /* Setting range to 4G */ + ret |= KXCJK1013_REG_CTRL1_BIT_GSEL0; + ret &= ~KXCJK1013_REG_CTRL1_BIT_GSEL1; + + /* Set 12 bit mode */ + ret |= KXCJK1013_REG_CTRL1_BIT_RES; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl\n"); + return ret; + } + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_DATA_CTRL); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_data_ctrl\n"); + return ret; + } + + data->odr_bits = ret; + + /* Set up INT polarity */ + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); + return ret; + } + + if (data->active_high_intr) + ret |= KXCJK1013_REG_INT_REG1_BIT_IEA; + else + ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEA; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); + return ret; + } + + return 0; +} + +static int kxcjk1013_chip_setup_interrupt(struct kxcjk1013_data *data, + bool status) +{ + int ret; + + /* This is requirement by spec to change state to STANDBY */ + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n"); + return ret; + } + + if (status) + ret |= KXCJK1013_REG_INT_REG1_BIT_IEN; + else + ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n"); + return ret; + } + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_ctrl1\n"); + return ret; + } + + if (status) + ret |= KXCJK1013_REG_CTRL1_BIT_DRDY; + else + ret &= ~KXCJK1013_REG_CTRL1_BIT_DRDY; + + ret = i2c_smbus_write_byte_data(data->client, + KXCJK1013_REG_CTRL1, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_ctrl1\n"); + return ret; + } + + return ret; +} + +static int kxcjk1013_convert_freq_to_bit(int val, int val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) { + if (samp_freq_table[i].val == val && + samp_freq_table[i].val2 == val2) { + return samp_freq_table[i].odr_bits; + } + } + + return -EINVAL; +} + +static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2) +{ + int ret; + int odr_bits; + + odr_bits = kxcjk1013_convert_freq_to_bit(val, val2); + if (odr_bits < 0) + return odr_bits; + + /* To change ODR, the chip must be set to STANDBY as per spec */ + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_DATA_CTRL, + odr_bits); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing data_ctrl\n"); + return ret; + } + + data->odr_bits = odr_bits; + + /* Check, if the ODR is changed after data enable */ + if (data->power_state) { + /* Set the state back to operation */ + ret = kxcjk1013_set_mode(data, OPERATION); + if (ret < 0) + return ret; + } + + return 0; +} + +static int kxcjk1013_get_odr(struct kxcjk1013_data *data, int *val, int *val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(samp_freq_table); ++i) { + if (samp_freq_table[i].odr_bits == data->odr_bits) { + *val = samp_freq_table[i].val; + *val2 = samp_freq_table[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + } + } + + return -EINVAL; +} + +static int kxcjk1013_get_acc_reg(struct kxcjk1013_data *data, int axis) +{ + u8 reg = KXCJK1013_REG_XOUT_L + axis * 2; + int ret; + + ret = i2c_smbus_read_word_data(data->client, reg); + if (ret < 0) { + dev_err(&data->client->dev, + "failed to read accel_%c registers\n", 'x' + axis); + return ret; + } + + return ret; +} + +static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(odr_start_up_times); ++i) { + if (odr_start_up_times[i].odr_bits == data->odr_bits) + return odr_start_up_times[i].usec; + } + + return KXCJK1013_MAX_STARTUP_TIME_US; +} + +static int kxcjk1013_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->mutex); + if (iio_buffer_enabled(indio_dev)) + ret = -EBUSY; + else { + int sleep_val; + + ret = kxcjk1013_set_mode(data, OPERATION); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + ++data->power_state; + sleep_val = kxcjk1013_get_startup_times(data); + if (sleep_val < 20000) + usleep_range(sleep_val, 20000); + else + msleep_interruptible(sleep_val/1000); + ret = kxcjk1013_get_acc_reg(data, chan->scan_index); + if (--data->power_state == 0) + kxcjk1013_set_mode(data, STANDBY); + } + mutex_unlock(&data->mutex); + + if (ret < 0) + return ret; + + *val = sign_extend32(ret >> 4, 11); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 19163; /* range +-4g (4/2047*9.806650) */ + return IIO_VAL_INT_PLUS_MICRO; + + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = kxcjk1013_get_odr(data, val, val2); + mutex_unlock(&data->mutex); + return ret; + + default: + return -EINVAL; + } +} + +static int kxcjk1013_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = kxcjk1013_set_odr(data, val, val2); + mutex_unlock(&data->mutex); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct kxcjk1013_data *data = iio_priv(indio_dev); + + if (data->trig != trig) + return -EINVAL; + + return 0; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800 1600"); + +static struct attribute *kxcjk1013_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group kxcjk1013_attrs_group = { + .attrs = kxcjk1013_attributes, +}; + +#define KXCJK1013_CHANNEL(_axis) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = AXIS_##_axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec kxcjk1013_channels[] = { + KXCJK1013_CHANNEL(X), + KXCJK1013_CHANNEL(Y), + KXCJK1013_CHANNEL(Z), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_info kxcjk1013_info = { + .attrs = &kxcjk1013_attrs_group, + .read_raw = kxcjk1013_read_raw, + .write_raw = kxcjk1013_write_raw, + .validate_trigger = kxcjk1013_validate_trigger, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct kxcjk1013_data *data = iio_priv(indio_dev); + int bit, ret, i = 0; + + mutex_lock(&data->mutex); + + for_each_set_bit(bit, indio_dev->buffer->scan_mask, + indio_dev->masklength) { + ret = kxcjk1013_get_acc_reg(data, bit); + if (ret < 0) { + mutex_unlock(&data->mutex); + goto err; + } + data->buffer[i++] = ret; + } + mutex_unlock(&data->mutex); + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int kxcjk1013_trig_try_reen(struct iio_trigger *trig) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_rel\n"); + return ret; + } + + return 0; +} + +static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct kxcjk1013_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + if (state) { + kxcjk1013_chip_setup_interrupt(data, true); + kxcjk1013_set_mode(data, OPERATION); + ++data->power_state; + } else { + if (--data->power_state) { + mutex_unlock(&data->mutex); + return 0; + } + kxcjk1013_chip_setup_interrupt(data, false); + kxcjk1013_set_mode(data, STANDBY); + } + mutex_unlock(&data->mutex); + + return 0; +} + +static const struct iio_trigger_ops kxcjk1013_trigger_ops = { + .set_trigger_state = kxcjk1013_data_rdy_trigger_set_state, + .try_reenable = kxcjk1013_trig_try_reen, + .owner = THIS_MODULE, +}; + +static int kxcjk1013_acpi_gpio_probe(struct i2c_client *client, + struct kxcjk1013_data *data) +{ + const struct acpi_device_id *id; + struct device *dev; + struct gpio_desc *gpio; + int ret; + + if (!client) + return -EINVAL; + + dev = &client->dev; + if (!ACPI_HANDLE(dev)) + return -ENODEV; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return -ENODEV; + + /* data ready gpio interrupt pin */ + gpio = devm_gpiod_get_index(dev, "kxcjk1013_int", 0); + if (IS_ERR(gpio)) { + dev_err(dev, "acpi gpio get index failed\n"); + return PTR_ERR(gpio); + } + + ret = gpiod_direction_input(gpio); + if (ret) + return ret; + + ret = gpiod_to_irq(gpio); + + dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); + + return ret; +} + +static int kxcjk1013_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct kxcjk1013_data *data; + struct iio_dev *indio_dev; + struct iio_trigger *trig = NULL; + struct kxcjk_1013_platform_data *pdata; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + pdata = dev_get_platdata(&client->dev); + if (pdata) + data->active_high_intr = pdata->active_high_intr; + else + data->active_high_intr = true; /* default polarity */ + + ret = kxcjk1013_chip_init(data); + if (ret < 0) + return ret; + + mutex_init(&data->mutex); + + indio_dev->dev.parent = &client->dev; + indio_dev->channels = kxcjk1013_channels; + indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels); + indio_dev->name = KXCJK1013_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &kxcjk1013_info; + + if (client->irq < 0) + client->irq = kxcjk1013_acpi_gpio_probe(client, data); + + if (client->irq >= 0) { + trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, + indio_dev->id); + if (!trig) + return -ENOMEM; + + data->trig_mode = true; + + ret = devm_request_irq(&client->dev, client->irq, + iio_trigger_generic_data_rdy_poll, + IRQF_TRIGGER_RISING, + KXCJK1013_IRQ_NAME, + trig); + if (ret) { + dev_err(&client->dev, "unable to request IRQ\n"); + goto err_trigger_free; + } + + trig->dev.parent = &client->dev; + trig->ops = &kxcjk1013_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + data->trig = trig; + indio_dev->trig = trig; + iio_trigger_get(indio_dev->trig); + + ret = iio_trigger_register(trig); + if (ret) + goto err_trigger_free; + + ret = iio_triggered_buffer_setup(indio_dev, + &iio_pollfunc_store_time, + kxcjk1013_trigger_handler, + NULL); + if (ret < 0) { + dev_err(&client->dev, + "iio triggered buffer setup failed\n"); + goto err_trigger_unregister; + } + } + + ret = devm_iio_device_register(&client->dev, indio_dev); + if (ret < 0) { + dev_err(&client->dev, "unable to register iio device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + if (data->trig_mode) + iio_triggered_buffer_cleanup(indio_dev); +err_trigger_unregister: + if (data->trig_mode) + iio_trigger_unregister(trig); +err_trigger_free: + if (data->trig_mode) + iio_trigger_free(trig); + + return ret; +} + +static int kxcjk1013_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct kxcjk1013_data *data = iio_priv(indio_dev); + + if (data->trig_mode) { + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + iio_trigger_free(data->trig); + } + + mutex_lock(&data->mutex); + kxcjk1013_set_mode(data, STANDBY); + mutex_unlock(&data->mutex); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int kxcjk1013_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct kxcjk1013_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + kxcjk1013_set_mode(data, STANDBY); + mutex_unlock(&data->mutex); + + return 0; +} + +static int kxcjk1013_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct kxcjk1013_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + + if (data->power_state) + kxcjk1013_set_mode(data, OPERATION); + + mutex_unlock(&data->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(kxcjk1013_pm_ops, kxcjk1013_suspend, kxcjk1013_resume); +#define KXCJK1013_PM_OPS (&kxcjk1013_pm_ops) +#else +#define KXCJK1013_PM_OPS NULL +#endif + +static const struct acpi_device_id kx_acpi_match[] = { + {"KXCJ1013", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, kx_acpi_match); + +static const struct i2c_device_id kxcjk1013_id[] = { + {"kxcjk1013", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, kxcjk1013_id); + +static struct i2c_driver kxcjk1013_driver = { + .driver = { + .name = KXCJK1013_DRV_NAME, + .acpi_match_table = ACPI_PTR(kx_acpi_match), + .pm = KXCJK1013_PM_OPS, + }, + .probe = kxcjk1013_probe, + .remove = kxcjk1013_remove, + .id_table = kxcjk1013_id, +}; +module_i2c_driver(kxcjk1013_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("KXCJK1013 accelerometer driver"); |