summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig21
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/ad799x.c791
-rw-r--r--drivers/iio/adc/at91_adc.c340
-rw-r--r--drivers/iio/adc/exynos_adc.c131
-rw-r--r--drivers/iio/adc/max1363.c16
-rw-r--r--drivers/iio/adc/mcp3422.c33
7 files changed, 1208 insertions, 125 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 24c28e3f93a..a80d23628f1 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -96,9 +96,21 @@ config AD7923
To compile this driver as a module, choose M here: the
module will be called ad7923.
+config AD799X
+ tristate "Analog Devices AD799x ADC driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Analog Devices:
+ ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
+ i2c analog to digital converters (ADC). Provides direct access
+ via sysfs.
+
config AT91_ADC
tristate "Atmel AT91 ADC"
depends on ARCH_AT91
+ depends on INPUT
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select SYSFS
@@ -107,7 +119,7 @@ config AT91_ADC
config EXYNOS_ADC
tristate "Exynos ADC driver support"
- depends on OF
+ depends on ARCH_EXYNOS || (OF && COMPILE_TEST)
help
Core support for the ADC block found in the Samsung EXYNOS series
of SoCs for drivers such as the touchscreen and hwmon to use to share
@@ -146,11 +158,12 @@ config MCP320X
called mcp320x.
config MCP3422
- tristate "Microchip Technology MCP3422/3/4 driver"
+ tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
depends on I2C
help
- Say yes here to build support for Microchip Technology's MCP3422,
- MCP3423 or MCP3424 analog to digital converters.
+ Say yes here to build support for Microchip Technology's
+ MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
+ analog to digital converters.
This driver can also be built as a module. If so, the module will be
called mcp3422.
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ab346d88c68..9d60f2deaaa 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_AD7476) += ad7476.o
obj-$(CONFIG_AD7791) += ad7791.o
obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
+obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
new file mode 100644
index 00000000000..39b4cb48d73
--- /dev/null
+++ b/drivers/iio/adc/ad799x.c
@@ -0,0 +1,791 @@
+/*
+ * iio/adc/ad799x.c
+ * Copyright (C) 2010-2011 Michael Hennerich, Analog Devices Inc.
+ *
+ * based on iio/adc/max1363
+ * Copyright (C) 2008-2010 Jonathan Cameron
+ *
+ * based on linux/drivers/i2c/chips/max123x
+ * Copyright (C) 2002-2004 Stefan Eletzhofer
+ *
+ * based on linux/drivers/acron/char/pcf8583.c
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ad799x.c
+ *
+ * Support for ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997,
+ * ad7998 and similar chips.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define AD799X_CHANNEL_SHIFT 4
+#define AD799X_STORAGEBITS 16
+/*
+ * AD7991, AD7995 and AD7999 defines
+ */
+
+#define AD7991_REF_SEL 0x08
+#define AD7991_FLTR 0x04
+#define AD7991_BIT_TRIAL_DELAY 0x02
+#define AD7991_SAMPLE_DELAY 0x01
+
+/*
+ * AD7992, AD7993, AD7994, AD7997 and AD7998 defines
+ */
+
+#define AD7998_FLTR 0x08
+#define AD7998_ALERT_EN 0x04
+#define AD7998_BUSY_ALERT 0x02
+#define AD7998_BUSY_ALERT_POL 0x01
+
+#define AD7998_CONV_RES_REG 0x0
+#define AD7998_ALERT_STAT_REG 0x1
+#define AD7998_CONF_REG 0x2
+#define AD7998_CYCLE_TMR_REG 0x3
+
+#define AD7998_DATALOW_REG(x) ((x) * 3 + 0x4)
+#define AD7998_DATAHIGH_REG(x) ((x) * 3 + 0x5)
+#define AD7998_HYST_REG(x) ((x) * 3 + 0x6)
+
+#define AD7998_CYC_MASK 0x7
+#define AD7998_CYC_DIS 0x0
+#define AD7998_CYC_TCONF_32 0x1
+#define AD7998_CYC_TCONF_64 0x2
+#define AD7998_CYC_TCONF_128 0x3
+#define AD7998_CYC_TCONF_256 0x4
+#define AD7998_CYC_TCONF_512 0x5
+#define AD7998_CYC_TCONF_1024 0x6
+#define AD7998_CYC_TCONF_2048 0x7
+
+#define AD7998_ALERT_STAT_CLEAR 0xFF
+
+/*
+ * AD7997 and AD7997 defines
+ */
+
+#define AD7997_8_READ_SINGLE 0x80
+#define AD7997_8_READ_SEQUENCE 0x70
+/* TODO: move this into a common header */
+#define RES_MASK(bits) ((1 << (bits)) - 1)
+
+enum {
+ ad7991,
+ ad7995,
+ ad7999,
+ ad7992,
+ ad7993,
+ ad7994,
+ ad7997,
+ ad7998
+};
+
+/**
+ * struct ad799x_chip_info - chip specific information
+ * @channel: channel specification
+ * @num_channels: number of channels
+ * @monitor_mode: whether the chip supports monitor interrupts
+ * @default_config: device default configuration
+ * @event_attrs: pointer to the monitor event attribute group
+ */
+struct ad799x_chip_info {
+ struct iio_chan_spec channel[9];
+ int num_channels;
+ u16 default_config;
+ const struct iio_info *info;
+};
+
+struct ad799x_state {
+ struct i2c_client *client;
+ const struct ad799x_chip_info *chip_info;
+ struct regulator *reg;
+ struct regulator *vref;
+ unsigned id;
+ u16 config;
+
+ u8 *rx_buf;
+ unsigned int transfer_size;
+};
+
+/**
+ * ad799x_trigger_handler() bh of trigger launched polling to ring buffer
+ *
+ * Currently there is no option in this driver to disable the saving of
+ * timestamps within the ring.
+ **/
+static irqreturn_t ad799x_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ad799x_state *st = iio_priv(indio_dev);
+ int b_sent;
+ u8 cmd;
+
+ switch (st->id) {
+ case ad7991:
+ case ad7995:
+ case ad7999:
+ cmd = st->config |
+ (*indio_dev->active_scan_mask << AD799X_CHANNEL_SHIFT);
+ break;
+ case ad7992:
+ case ad7993:
+ case ad7994:
+ cmd = (*indio_dev->active_scan_mask << AD799X_CHANNEL_SHIFT) |
+ AD7998_CONV_RES_REG;
+ break;
+ case ad7997:
+ case ad7998:
+ cmd = AD7997_8_READ_SEQUENCE | AD7998_CONV_RES_REG;
+ break;
+ default:
+ cmd = 0;
+ }
+
+ b_sent = i2c_smbus_read_i2c_block_data(st->client,
+ cmd, st->transfer_size, st->rx_buf);
+ if (b_sent < 0)
+ goto out;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+ iio_get_time_ns());
+out:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ad799x register access by I2C
+ */
+static int ad799x_i2c_read16(struct ad799x_state *st, u8 reg, u16 *data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_read_word_swapped(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+
+ *data = (u16)ret;
+
+ return 0;
+}
+
+static int ad799x_i2c_read8(struct ad799x_state *st, u8 reg, u8 *data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+
+ *data = (u8)ret;
+
+ return 0;
+}
+
+static int ad799x_i2c_write16(struct ad799x_state *st, u8 reg, u16 data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_write_word_swapped(client, reg, data);
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static int ad799x_i2c_write8(struct ad799x_state *st, u8 reg, u8 data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_write_byte_data(client, reg, data);
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ kfree(st->rx_buf);
+ st->rx_buf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (!st->rx_buf)
+ return -ENOMEM;
+
+ st->transfer_size = bitmap_weight(scan_mask, indio_dev->masklength) * 2;
+
+ switch (st->id) {
+ case ad7997:
+ case ad7998:
+ return ad799x_i2c_write16(st, AD7998_CONF_REG,
+ st->config | (*scan_mask << AD799X_CHANNEL_SHIFT));
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
+{
+ u16 rxbuf;
+ u8 cmd;
+ int ret;
+
+ switch (st->id) {
+ case ad7991:
+ case ad7995:
+ case ad7999:
+ cmd = st->config | ((1 << ch) << AD799X_CHANNEL_SHIFT);
+ break;
+ case ad7992:
+ case ad7993:
+ case ad7994:
+ cmd = (1 << ch) << AD799X_CHANNEL_SHIFT;
+ break;
+ case ad7997:
+ case ad7998:
+ cmd = (ch << AD799X_CHANNEL_SHIFT) | AD7997_8_READ_SINGLE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = ad799x_i2c_read16(st, cmd, &rxbuf);
+ if (ret < 0)
+ return ret;
+
+ return rxbuf;
+}
+
+static int ad799x_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (iio_buffer_enabled(indio_dev))
+ ret = -EBUSY;
+ else
+ ret = ad799x_scan_direct(st, chan->scan_index);
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret < 0)
+ return ret;
+ *val = (ret >> chan->scan_type.shift) &
+ RES_MASK(chan->scan_type.realbits);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ ret = regulator_get_voltage(st->vref);
+ if (ret < 0)
+ return ret;
+ *val = ret / 1000;
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ }
+ return -EINVAL;
+}
+static const unsigned int ad7998_frequencies[] = {
+ [AD7998_CYC_DIS] = 0,
+ [AD7998_CYC_TCONF_32] = 15625,
+ [AD7998_CYC_TCONF_64] = 7812,
+ [AD7998_CYC_TCONF_128] = 3906,
+ [AD7998_CYC_TCONF_512] = 976,
+ [AD7998_CYC_TCONF_1024] = 488,
+ [AD7998_CYC_TCONF_2048] = 244,
+};
+static ssize_t ad799x_read_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ int ret;
+ u8 val;
+ ret = ad799x_i2c_read8(st, AD7998_CYCLE_TMR_REG, &val);
+ if (ret)
+ return ret;
+
+ val &= AD7998_CYC_MASK;
+
+ return sprintf(buf, "%u\n", ad7998_frequencies[val]);
+}
+
+static ssize_t ad799x_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ long val;
+ int ret, i;
+ u8 t;
+
+ ret = kstrtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&indio_dev->mlock);
+ ret = ad799x_i2c_read8(st, AD7998_CYCLE_TMR_REG, &t);
+ if (ret)
+ goto error_ret_mutex;
+ /* Wipe the bits clean */
+ t &= ~AD7998_CYC_MASK;
+
+ for (i = 0; i < ARRAY_SIZE(ad7998_frequencies); i++)
+ if (val == ad7998_frequencies[i])
+ break;
+ if (i == ARRAY_SIZE(ad7998_frequencies)) {
+ ret = -EINVAL;
+ goto error_ret_mutex;
+ }
+ t |= i;
+ ret = ad799x_i2c_write8(st, AD7998_CYCLE_TMR_REG, t);
+
+error_ret_mutex:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret ? ret : len;
+}
+
+static int ad799x_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ return 1;
+}
+
+static unsigned int ad799x_threshold_reg(const struct iio_chan_spec *chan,
+ enum iio_event_direction dir,
+ enum iio_event_info info)
+{
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (dir == IIO_EV_DIR_FALLING)
+ return AD7998_DATALOW_REG(chan->channel);
+ else
+ return AD7998_DATAHIGH_REG(chan->channel);
+ case IIO_EV_INFO_HYSTERESIS:
+ return AD7998_HYST_REG(chan->channel);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ad799x_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ int ret;
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ ret = ad799x_i2c_write16(st, ad799x_threshold_reg(chan, dir, info),
+ val);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int ad799x_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ int ret;
+ struct ad799x_state *st = iio_priv(indio_dev);
+ u16 valin;
+
+ mutex_lock(&indio_dev->mlock);
+ ret = ad799x_i2c_read16(st, ad799x_threshold_reg(chan, dir, info),
+ &valin);
+ mutex_unlock(&indio_dev->mlock);
+ if (ret < 0)
+ return ret;
+ *val = valin;
+
+ return IIO_VAL_INT;
+}
+
+static irqreturn_t ad799x_event_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct ad799x_state *st = iio_priv(private);
+ u8 status;
+ int i, ret;
+
+ ret = ad799x_i2c_read8(st, AD7998_ALERT_STAT_REG, &status);
+ if (ret)
+ goto done;
+
+ if (!status)
+ goto done;
+
+ ad799x_i2c_write8(st, AD7998_ALERT_STAT_REG, AD7998_ALERT_STAT_CLEAR);
+
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i))
+ iio_push_event(indio_dev,
+ i & 0x1 ?
+ IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
+ (i >> 1),
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING) :
+ IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
+ (i >> 1),
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING),
+ iio_get_time_ns());
+ }
+
+done:
+ return IRQ_HANDLED;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ ad799x_read_frequency,
+ ad799x_write_frequency);
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("15625 7812 3906 1953 976 488 244 0");
+
+static struct attribute *ad799x_event_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ad799x_event_attrs_group = {
+ .attrs = ad799x_event_attributes,
+ .name = "events",
+};
+
+static const struct iio_info ad7991_info = {
+ .read_raw = &ad799x_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static const struct iio_info ad7993_4_7_8_info = {
+ .read_raw = &ad799x_read_raw,
+ .event_attrs = &ad799x_event_attrs_group,
+ .read_event_config = &ad799x_read_event_config,
+ .read_event_value = &ad799x_read_event_value,
+ .write_event_value = &ad799x_write_event_value,
+ .driver_module = THIS_MODULE,
+ .update_scan_mode = ad7997_8_update_scan_mode,
+};
+
+static const struct iio_event_spec ad799x_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
+ },
+};
+
+#define _AD799X_CHANNEL(_index, _realbits, _ev_spec, _num_ev_spec) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_index), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = (_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_realbits), \
+ .storagebits = 16, \
+ .shift = 12 - (_realbits), \
+ .endianness = IIO_BE, \
+ }, \
+ .event_spec = _ev_spec, \
+ .num_event_specs = _num_ev_spec, \
+}
+
+#define AD799X_CHANNEL(_index, _realbits) \
+ _AD799X_CHANNEL(_index, _realbits, NULL, 0)
+
+#define AD799X_CHANNEL_WITH_EVENTS(_index, _realbits) \
+ _AD799X_CHANNEL(_index, _realbits, ad799x_events, \
+ ARRAY_SIZE(ad799x_events))
+
+static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
+ [ad7991] = {
+ .channel = {
+ AD799X_CHANNEL(0, 12),
+ AD799X_CHANNEL(1, 12),
+ AD799X_CHANNEL(2, 12),
+ AD799X_CHANNEL(3, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .info = &ad7991_info,
+ },
+ [ad7995] = {
+ .channel = {
+ AD799X_CHANNEL(0, 10),
+ AD799X_CHANNEL(1, 10),
+ AD799X_CHANNEL(2, 10),
+ AD799X_CHANNEL(3, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .info = &ad7991_info,
+ },
+ [ad7999] = {
+ .channel = {
+ AD799X_CHANNEL(0, 8),
+ AD799X_CHANNEL(1, 8),
+ AD799X_CHANNEL(2, 8),
+ AD799X_CHANNEL(3, 8),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .info = &ad7991_info,
+ },
+ [ad7992] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 12),
+ AD799X_CHANNEL_WITH_EVENTS(1, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+ },
+ .num_channels = 3,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7993] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 10),
+ AD799X_CHANNEL_WITH_EVENTS(1, 10),
+ AD799X_CHANNEL_WITH_EVENTS(2, 10),
+ AD799X_CHANNEL_WITH_EVENTS(3, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7994] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 12),
+ AD799X_CHANNEL_WITH_EVENTS(1, 12),
+ AD799X_CHANNEL_WITH_EVENTS(2, 12),
+ AD799X_CHANNEL_WITH_EVENTS(3, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7997] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 10),
+ AD799X_CHANNEL_WITH_EVENTS(1, 10),
+ AD799X_CHANNEL_WITH_EVENTS(2, 10),
+ AD799X_CHANNEL_WITH_EVENTS(3, 10),
+ AD799X_CHANNEL(4, 10),
+ AD799X_CHANNEL(5, 10),
+ AD799X_CHANNEL(6, 10),
+ AD799X_CHANNEL(7, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ },
+ .num_channels = 9,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7998] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 12),
+ AD799X_CHANNEL_WITH_EVENTS(1, 12),
+ AD799X_CHANNEL_WITH_EVENTS(2, 12),
+ AD799X_CHANNEL_WITH_EVENTS(3, 12),
+ AD799X_CHANNEL(4, 12),
+ AD799X_CHANNEL(5, 12),
+ AD799X_CHANNEL(6, 12),
+ AD799X_CHANNEL(7, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ },
+ .num_channels = 9,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+};
+
+static int ad799x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct ad799x_state *st;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ /* this is only used for device removal purposes */
+ i2c_set_clientdata(client, indio_dev);
+
+ st->id = id->driver_data;
+ st->chip_info = &ad799x_chip_info_tbl[st->id];
+ st->config = st->chip_info->default_config;
+
+ /* TODO: Add pdata options for filtering and bit delay */
+
+ st->reg = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(st->reg))
+ return PTR_ERR(st->reg);
+ ret = regulator_enable(st->reg);
+ if (ret)
+ return ret;
+ st->vref = devm_regulator_get(&client->dev, "vref");
+ if (IS_ERR(st->vref)) {
+ ret = PTR_ERR(st->vref);
+ goto error_disable_reg;
+ }
+ ret = regulator_enable(st->vref);
+ if (ret)
+ goto error_disable_reg;
+
+ st->client = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = id->name;
+ indio_dev->info = st->chip_info->info;
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = st->chip_info->channel;
+ indio_dev->num_channels = st->chip_info->num_channels;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ &ad799x_trigger_handler, NULL);
+ if (ret)
+ goto error_disable_vref;
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(&client->dev,
+ client->irq,
+ NULL,
+ ad799x_event_handler,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ client->name,
+ indio_dev);
+ if (ret)
+ goto error_cleanup_ring;
+ }
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_cleanup_ring;
+
+ return 0;
+
+error_cleanup_ring:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_disable_vref:
+ regulator_disable(st->vref);
+error_disable_reg:
+ regulator_disable(st->reg);
+
+ return ret;
+}
+
+static int ad799x_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ iio_triggered_buffer_cleanup(indio_dev);
+ regulator_disable(st->vref);
+ regulator_disable(st->reg);
+ kfree(st->rx_buf);
+
+ return 0;
+}
+
+static const struct i2c_device_id ad799x_id[] = {
+ { "ad7991", ad7991 },
+ { "ad7995", ad7995 },
+ { "ad7999", ad7999 },
+ { "ad7992", ad7992 },
+ { "ad7993", ad7993 },
+ { "ad7994", ad7994 },
+ { "ad7997", ad7997 },
+ { "ad7998", ad7998 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, ad799x_id);
+
+static struct i2c_driver ad799x_driver = {
+ .driver = {
+ .name = "ad799x",
+ },
+ .probe = ad799x_probe,
+ .remove = ad799x_remove,
+ .id_table = ad799x_id,
+};
+module_i2c_driver(ad799x_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD799x ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 89777ed9abd..3b5bacd4d8d 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -31,7 +31,108 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
-#include <mach/at91_adc.h>
+/* Registers */
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */
+#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */
+#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */
+#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
+#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
+#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
+#define AT91_ADC_STARTUP_9X5 (0xf << 16)
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_PENDBC_(x) ((x) << 28)
+
+#define AT91_ADC_TSR 0x0C
+#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
+#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+#define AT91RL_ADC_IER_PEN (1 << 20)
+#define AT91RL_ADC_IER_NOPEN (1 << 21)
+#define AT91_ADC_IER_PEN (1 << 29)
+#define AT91_ADC_IER_NOPEN (1 << 30)
+#define AT91_ADC_IER_XRDY (1 << 20)
+#define AT91_ADC_IER_YRDY (1 << 21)
+#define AT91_ADC_IER_PRDY (1 << 22)
+#define AT91_ADC_ISR_PENS (1 << 31)
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_ACR 0x94 /* Analog Control Register */
+#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */
+
+#define AT91_ADC_TSMR 0xB0
+#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */
+#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
+#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
+#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
+#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
+#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */
+#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
+#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */
+#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */
+#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR 0xB4
+#define AT91_ADC_TSYPOSR 0xB8
+#define AT91_ADC_TSPRESSR 0xBC
+
+#define AT91_ADC_TRGR_9260 AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45 0x08
+#define AT91_ADC_TRGR_9X5 0xC0
+
+/* Trigger Register bit field */
+#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
+#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
+#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
+#define AT91_ADC_TRGR_NONE (0 << 0)
+#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
#define AT91_ADC_CHAN(st, ch) \
(st->registers->channel_base + (ch * 4))
@@ -46,6 +147,29 @@
#define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */
#define TOUCH_PEN_DETECT_DEBOUNCE_US 200
+#define MAX_RLPOS_BITS 10
+#define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */
+#define TOUCH_SHTIM 0xa
+
+/**
+ * struct at91_adc_reg_desc - Various informations relative to registers
+ * @channel_base: Base offset for the channel data registers
+ * @drdy_mask: Mask of the DRDY field in the relevant registers
+ (Interruptions registers mostly)
+ * @status_register: Offset of the Interrupt Status Register
+ * @trigger_register: Offset of the Trigger setup register
+ * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register
+ * @mr_startup_mask: Mask of the STARTUP field in the adc MR register
+ */
+struct at91_adc_reg_desc {
+ u8 channel_base;
+ u32 drdy_mask;
+ u8 status_register;
+ u8 trigger_register;
+ u32 mr_prescal_mask;
+ u32 mr_startup_mask;
+};
+
struct at91_adc_caps {
bool has_ts; /* Support touch screen */
bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */
@@ -64,12 +188,6 @@ struct at91_adc_caps {
struct at91_adc_reg_desc registers;
};
-enum atmel_adc_ts_type {
- ATMEL_ADC_TOUCHSCREEN_NONE = 0,
- ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
- ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
-};
-
struct at91_adc_state {
struct clk *adc_clk;
u16 *buffer;
@@ -114,6 +232,11 @@ struct at91_adc_state {
u16 ts_sample_period_val;
u32 ts_pressure_threshold;
+ u16 ts_pendbc;
+
+ bool ts_bufferedmeasure;
+ u32 ts_prev_absx;
+ u32 ts_prev_absy;
};
static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
@@ -220,7 +343,72 @@ static int at91_ts_sample(struct at91_adc_state *st)
return 0;
}
-static irqreturn_t at91_adc_interrupt(int irq, void *private)
+static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
+{
+ struct iio_dev *idev = private;
+ struct at91_adc_state *st = iio_priv(idev);
+ u32 status = at91_adc_readl(st, st->registers->status_register);
+ unsigned int reg;
+
+ status &= at91_adc_readl(st, AT91_ADC_IMR);
+ if (status & st->registers->drdy_mask)
+ handle_adc_eoc_trigger(irq, idev);
+
+ if (status & AT91RL_ADC_IER_PEN) {
+ /* Disabling pen debounce is required to get a NOPEN irq */
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg &= ~AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ /* Set up period trigger for sampling */
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_MOD_PERIOD_TRIG |
+ AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val));
+ } else if (status & AT91RL_ADC_IER_NOPEN) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_NONE);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
+ st->ts_bufferedmeasure = false;
+ input_report_key(st->ts_input, BTN_TOUCH, 0);
+ input_sync(st->ts_input);
+ } else if (status & AT91_ADC_EOC(3)) {
+ /* Conversion finished */
+ if (st->ts_bufferedmeasure) {
+ /*
+ * Last measurement is always discarded, since it can
+ * be erroneous.
+ * Always report previous measurement
+ */
+ input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx);
+ input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy);
+ input_report_key(st->ts_input, BTN_TOUCH, 1);
+ input_sync(st->ts_input);
+ } else
+ st->ts_bufferedmeasure = true;
+
+ /* Now make new measurement */
+ st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2));
+
+ st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
{
struct iio_dev *idev = private;
struct at91_adc_state *st = iio_priv(idev);
@@ -653,6 +841,8 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
return -EINVAL;
}
+ if (!st->caps->has_tsmr)
+ return 0;
prop = 0;
of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop);
st->ts_pressure_threshold = prop;
@@ -776,6 +966,7 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st,
st->trigger_number = pdata->trigger_number;
st->trigger_list = pdata->trigger_list;
st->registers = &st->caps->registers;
+ st->touchscreen_type = pdata->touchscreen_type;
return 0;
}
@@ -790,7 +981,10 @@ static int atmel_ts_open(struct input_dev *dev)
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
return 0;
}
@@ -798,45 +992,61 @@ static void atmel_ts_close(struct input_dev *dev)
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
}
static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
{
- u32 reg = 0, pendbc;
+ u32 reg = 0;
int i = 0;
- if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
- reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
- else
- reg = AT91_ADC_TSMR_TSMODE_5WIRE;
-
/* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid
* pen detect noise.
* The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock
*/
- pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1);
+ st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz /
+ 1000, 1);
- while (pendbc >> ++i)
+ while (st->ts_pendbc >> ++i)
; /* Empty! Find the shift offset */
- if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1))))
- pendbc = i;
+ if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1))))
+ st->ts_pendbc = i;
else
- pendbc = i - 1;
+ st->ts_pendbc = i - 1;
- if (st->caps->has_tsmr) {
- reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
- & AT91_ADC_TSMR_TSAV;
- reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC;
- reg |= AT91_ADC_TSMR_NOTSDMA;
- reg |= AT91_ADC_TSMR_PENDET_ENA;
- reg |= 0x03 << 8; /* TSFREQ, need bigger than TSAV */
-
- at91_adc_writel(st, AT91_ADC_TSMR, reg);
- } else {
- /* TODO: for 9g45 which has no TSMR */
+ if (!st->caps->has_tsmr) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET;
+
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM;
+ at91_adc_writel(st, AT91_ADC_TSR, reg);
+
+ st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL *
+ adc_clk_khz / 1000) - 1, 1);
+
+ return 0;
}
+ if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
+ reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
+ else
+ reg = AT91_ADC_TSMR_TSMODE_5WIRE;
+
+ reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
+ & AT91_ADC_TSMR_TSAV;
+ reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC;
+ reg |= AT91_ADC_TSMR_NOTSDMA;
+ reg |= AT91_ADC_TSMR_PENDET_ENA;
+ reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */
+
+ at91_adc_writel(st, AT91_ADC_TSMR, reg);
+
/* Change adc internal resistor value for better pen detection,
* default value is 100 kOhm.
* 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm
@@ -845,7 +1055,7 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity
& AT91_ADC_ACR_PENDETSENS);
- /* Sample Peroid Time = (TRGPER + 1) / ADCClock */
+ /* Sample Period Time = (TRGPER + 1) / ADCClock */
st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US *
adc_clk_khz / 1000) - 1, 1);
@@ -874,18 +1084,38 @@ static int at91_ts_register(struct at91_adc_state *st,
__set_bit(EV_ABS, input->evbit);
__set_bit(EV_KEY, input->evbit);
__set_bit(BTN_TOUCH, input->keybit);
- input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ if (st->caps->has_tsmr) {
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ } else {
+ if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) {
+ dev_err(&pdev->dev,
+ "This touchscreen controller only support 4 wires\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ }
st->ts_input = input;
input_set_drvdata(input, st);
ret = input_register_device(input);
if (ret)
- input_free_device(st->ts_input);
+ goto err;
return ret;
+
+err:
+ input_free_device(st->ts_input);
+ return ret;
}
static void at91_ts_unregister(struct at91_adc_state *st)
@@ -943,11 +1173,13 @@ static int at91_adc_probe(struct platform_device *pdev)
*/
at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
- ret = request_irq(st->irq,
- at91_adc_interrupt,
- 0,
- pdev->dev.driver->name,
- idev);
+
+ if (st->caps->has_tsmr)
+ ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0,
+ pdev->dev.driver->name, idev);
+ else
+ ret = request_irq(st->irq, at91_adc_rl_interrupt, 0,
+ pdev->dev.driver->name, idev);
if (ret) {
dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
return ret;
@@ -1051,12 +1283,6 @@ static int at91_adc_probe(struct platform_device *pdev)
goto error_disable_adc_clk;
}
} else {
- if (!st->caps->has_tsmr) {
- dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
- ret = -ENODEV;
- goto error_disable_adc_clk;
- }
-
ret = at91_ts_register(st, pdev);
if (ret)
goto error_disable_adc_clk;
@@ -1120,6 +1346,20 @@ static struct at91_adc_caps at91sam9260_caps = {
},
};
+static struct at91_adc_caps at91sam9rl_caps = {
+ .has_ts = true,
+ .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
+ .num_channels = 6,
+ .registers = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_TRGR_9G45,
+ .mr_prescal_mask = AT91_ADC_PRESCAL_9260,
+ .mr_startup_mask = AT91_ADC_STARTUP_9G45,
+ },
+};
+
static struct at91_adc_caps at91sam9g45_caps = {
.has_ts = true,
.calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
@@ -1154,6 +1394,7 @@ static struct at91_adc_caps at91sam9x5_caps = {
static const struct of_device_id at91_adc_dt_ids[] = {
{ .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps },
+ { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps },
{ .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps },
{ .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps },
{},
@@ -1165,6 +1406,9 @@ static const struct platform_device_id at91_adc_ids[] = {
.name = "at91sam9260-adc",
.driver_data = (unsigned long)&at91sam9260_caps,
}, {
+ .name = "at91sam9rl-adc",
+ .driver_data = (unsigned long)&at91sam9rl_caps,
+ }, {
.name = "at91sam9g45-adc",
.driver_data = (unsigned long)&at91sam9g45_caps,
}, {
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index affa93f5178..010578f1d76 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -82,7 +82,7 @@ enum adc_version {
#define ADC_CON_EN_START (1u << 0)
#define ADC_DATX_MASK 0xFFF
-#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000))
+#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
struct exynos_adc {
void __iomem *regs;
@@ -112,6 +112,30 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
return (unsigned int)match->data;
}
+static void exynos_adc_hw_init(struct exynos_adc *info)
+{
+ u32 con1, con2;
+
+ if (info->version == ADC_V2) {
+ con1 = ADC_V2_CON1_SOFT_RESET;
+ writel(con1, ADC_V2_CON1(info->regs));
+
+ con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
+ ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ /* Enable interrupts */
+ writel(1, ADC_V2_INT_EN(info->regs));
+ } else {
+ /* set default prescaler values and Enable prescaler */
+ con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
+
+ /* Enable 12-bit ADC resolution */
+ con1 |= ADC_V1_CON_RES;
+ writel(con1, ADC_V1_CON(info->regs));
+ }
+}
+
static int exynos_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
@@ -121,11 +145,13 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
struct exynos_adc *info = iio_priv(indio_dev);
unsigned long timeout;
u32 con1, con2;
+ int ret;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
/* Select the channel to be used and Trigger conversion */
if (info->version == ADC_V2) {
@@ -145,16 +171,21 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
ADC_V1_CON(info->regs));
}
- timeout = wait_for_completion_interruptible_timeout
+ timeout = wait_for_completion_timeout
(&info->completion, EXYNOS_ADC_TIMEOUT);
- *val = info->value;
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ exynos_adc_hw_init(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *val = info->value;
+ *val2 = 0;
+ ret = IIO_VAL_INT;
+ }
mutex_unlock(&indio_dev->mlock);
- if (timeout == 0)
- return -ETIMEDOUT;
-
- return IIO_VAL_INT;
+ return ret;
}
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
@@ -226,30 +257,6 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
return 0;
}
-static void exynos_adc_hw_init(struct exynos_adc *info)
-{
- u32 con1, con2;
-
- if (info->version == ADC_V2) {
- con1 = ADC_V2_CON1_SOFT_RESET;
- writel(con1, ADC_V2_CON1(info->regs));
-
- con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
- ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
- writel(con2, ADC_V2_CON2(info->regs));
-
- /* Enable interrupts */
- writel(1, ADC_V2_INT_EN(info->regs));
- } else {
- /* set default prescaler values and Enable prescaler */
- con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
-
- /* Enable 12-bit ADC resolution */
- con1 |= ADC_V1_CON_RES;
- writel(con1, ADC_V1_CON(info->regs));
- }
-}
-
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
@@ -290,32 +297,30 @@ static int exynos_adc_probe(struct platform_device *pdev)
init_completion(&info->completion);
- ret = request_irq(info->irq, exynos_adc_isr,
- 0, dev_name(&pdev->dev), info);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
- info->irq);
- return ret;
- }
-
- writel(1, info->enable_reg);
-
info->clk = devm_clk_get(&pdev->dev, "adc");
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
PTR_ERR(info->clk));
- ret = PTR_ERR(info->clk);
- goto err_irq;
+ return PTR_ERR(info->clk);
}
info->vdd = devm_regulator_get(&pdev->dev, "vdd");
if (IS_ERR(info->vdd)) {
dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
PTR_ERR(info->vdd));
- ret = PTR_ERR(info->vdd);
- goto err_irq;
+ return PTR_ERR(info->vdd);
}
+ ret = regulator_enable(info->vdd);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ goto err_disable_reg;
+
+ writel(1, info->enable_reg);
+
info->version = exynos_adc_get_version(pdev);
platform_set_drvdata(pdev, indio_dev);
@@ -332,16 +337,18 @@ static int exynos_adc_probe(struct platform_device *pdev)
else
indio_dev->num_channels = MAX_ADC_V2_CHANNELS;
+ ret = request_irq(info->irq, exynos_adc_isr,
+ 0, dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+ info->irq);
+ goto err_disable_clk;
+ }
+
ret = iio_device_register(indio_dev);
if (ret)
goto err_irq;
- ret = regulator_enable(info->vdd);
- if (ret)
- goto err_iio_dev;
-
- clk_prepare_enable(info->clk);
-
exynos_adc_hw_init(info);
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
@@ -355,12 +362,14 @@ static int exynos_adc_probe(struct platform_device *pdev)
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
- regulator_disable(info->vdd);
- clk_disable_unprepare(info->clk);
-err_iio_dev:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
+err_disable_clk:
+ writel(0, info->enable_reg);
+ clk_disable_unprepare(info->clk);
+err_disable_reg:
+ regulator_disable(info->vdd);
return ret;
}
@@ -371,11 +380,11 @@ static int exynos_adc_remove(struct platform_device *pdev)
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
- regulator_disable(info->vdd);
- clk_disable_unprepare(info->clk);
- writel(0, info->enable_reg);
iio_device_unregister(indio_dev);
free_irq(info->irq, info);
+ writel(0, info->enable_reg);
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vdd);
return 0;
}
@@ -397,8 +406,8 @@ static int exynos_adc_suspend(struct device *dev)
writel(con, ADC_V1_CON(info->regs));
}
- clk_disable_unprepare(info->clk);
writel(0, info->enable_reg);
+ clk_disable_unprepare(info->clk);
regulator_disable(info->vdd);
return 0;
@@ -414,9 +423,11 @@ static int exynos_adc_resume(struct device *dev)
if (ret)
return ret;
- writel(1, info->enable_reg);
- clk_prepare_enable(info->clk);
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ return ret;
+ writel(1, info->enable_reg);
exynos_adc_hw_init(info);
return 0;
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 9cf3229a727..1b3b74be5c2 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1252,8 +1252,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1038_channels,
+ .num_channels = ARRAY_SIZE(max1038_channels),
},
[max11605] = {
.bits = 8,
@@ -1262,8 +1262,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1038_channels,
+ .num_channels = ARRAY_SIZE(max1038_channels),
},
[max11606] = {
.bits = 10,
@@ -1312,8 +1312,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1138_channels,
+ .num_channels = ARRAY_SIZE(max1138_channels),
},
[max11611] = {
.bits = 10,
@@ -1322,8 +1322,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1138_channels,
+ .num_channels = ARRAY_SIZE(max1138_channels),
},
[max11612] = {
.bits = 12,
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 47dcb34ff44..51672256072 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -1,10 +1,11 @@
/*
- * mcp3422.c - driver for the Microchip mcp3422/3/4 chip family
+ * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family
*
* Copyright (C) 2013, Angelo Compagnucci
* Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
*
* Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf
*
* This driver exports the value of analog input voltage to sysfs, the
* voltage unit is nV.
@@ -96,6 +97,7 @@ static const int mcp3422_sign_extend[4] = {
/* Client data (each client gets its own) */
struct mcp3422 {
struct i2c_client *i2c;
+ u8 id;
u8 config;
u8 pga[4];
struct mutex lock;
@@ -238,6 +240,8 @@ static int mcp3422_write_raw(struct iio_dev *iio,
temp = MCP3422_SRATE_15;
break;
case 3:
+ if (adc->id > 4)
+ return -EINVAL;
temp = MCP3422_SRATE_3;
break;
default:
@@ -271,6 +275,17 @@ static int mcp3422_write_raw_get_fmt(struct iio_dev *indio_dev,
}
}
+static ssize_t mcp3422_show_samp_freqs(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mcp3422 *adc = iio_priv(dev_to_iio_dev(dev));
+
+ if (adc->id > 4)
+ return sprintf(buf, "240 60 15\n");
+
+ return sprintf(buf, "240 60 15 3\n");
+}
+
static ssize_t mcp3422_show_scales(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -284,12 +299,13 @@ static ssize_t mcp3422_show_scales(struct device *dev,
mcp3422_scales[sample_rate][3]);
}
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("240 60 15 3");
+static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
+ mcp3422_show_samp_freqs, NULL, 0);
static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO,
mcp3422_show_scales, NULL, 0);
static struct attribute *mcp3422_attributes[] = {
- &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
NULL,
};
@@ -335,6 +351,7 @@ static int mcp3422_probe(struct i2c_client *client,
adc = iio_priv(indio_dev);
adc->i2c = client;
+ adc->id = (u8)(id->driver_data);
mutex_init(&adc->lock);
@@ -343,13 +360,16 @@ static int mcp3422_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &mcp3422_info;
- switch ((unsigned int)(id->driver_data)) {
+ switch (adc->id) {
case 2:
case 3:
+ case 6:
+ case 7:
indio_dev->channels = mcp3422_channels;
indio_dev->num_channels = ARRAY_SIZE(mcp3422_channels);
break;
case 4:
+ case 8:
indio_dev->channels = mcp3424_channels;
indio_dev->num_channels = ARRAY_SIZE(mcp3424_channels);
break;
@@ -375,6 +395,9 @@ static const struct i2c_device_id mcp3422_id[] = {
{ "mcp3422", 2 },
{ "mcp3423", 3 },
{ "mcp3424", 4 },
+ { "mcp3426", 6 },
+ { "mcp3427", 7 },
+ { "mcp3428", 8 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mcp3422_id);
@@ -399,5 +422,5 @@ static struct i2c_driver mcp3422_driver = {
module_i2c_driver(mcp3422_driver);
MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
-MODULE_DESCRIPTION("Microchip mcp3422/3/4 driver");
+MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver");
MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-07 09:57:38 +0000