diff options
Diffstat (limited to 'drivers/iio/adc')
| -rw-r--r-- | drivers/iio/adc/at91_adc.c | 103 |
1 files changed, 102 insertions, 1 deletions
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index c0e4206e34e..a51b8badbf8 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -31,7 +31,108 @@ #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> -#include <mach/at91_adc.h> +/* Registers */ +#define AT91_ADC_CR 0x00 /* Control Register */ +#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ +#define AT91_ADC_START (1 << 1) /* Start Conversion */ + +#define AT91_ADC_MR 0x04 /* Mode Register */ +#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */ +#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */ +#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */ +#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ +#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ +#define AT91_ADC_TRGSEL_TC0 (0 << 1) +#define AT91_ADC_TRGSEL_TC1 (1 << 1) +#define AT91_ADC_TRGSEL_TC2 (2 << 1) +#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) +#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ +#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ +#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */ +#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9G45 (0xff << 8) +#define AT91_ADC_PRESCAL_(x) ((x) << 8) +#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9G45 (0x7f << 16) +#define AT91_ADC_STARTUP_9X5 (0xf << 16) +#define AT91_ADC_STARTUP_(x) ((x) << 16) +#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_SHTIM_(x) ((x) << 24) +#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_PENDBC_(x) ((x) << 28) + +#define AT91_ADC_TSR 0x0C +#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24) + +#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ +#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ +#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ +#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ + +#define AT91_ADC_SR 0x1C /* Status Register */ +#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ +#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ +#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ +#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ +#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ +#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ + +#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ +#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ + +#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ +#define AT91_ADC_LDATA (0x3ff) + +#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ +#define AT91RL_ADC_IER_PEN (1 << 20) +#define AT91RL_ADC_IER_NOPEN (1 << 21) +#define AT91_ADC_IER_PEN (1 << 29) +#define AT91_ADC_IER_NOPEN (1 << 30) +#define AT91_ADC_IER_XRDY (1 << 20) +#define AT91_ADC_IER_YRDY (1 << 21) +#define AT91_ADC_IER_PRDY (1 << 22) +#define AT91_ADC_ISR_PENS (1 << 31) + +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ +#define AT91_ADC_DATA (0x3ff) + +#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ + +#define AT91_ADC_ACR 0x94 /* Analog Control Register */ +#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ + +#define AT91_ADC_TSMR 0xB0 +#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ +#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) +#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) +#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ +#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) +#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ +#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) +#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ +#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ +#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ + +#define AT91_ADC_TSXPOSR 0xB4 +#define AT91_ADC_TSYPOSR 0xB8 +#define AT91_ADC_TSPRESSR 0xBC + +#define AT91_ADC_TRGR_9260 AT91_ADC_MR +#define AT91_ADC_TRGR_9G45 0x08 +#define AT91_ADC_TRGR_9X5 0xC0 + +/* Trigger Register bit field */ +#define AT91_ADC_TRGR_TRGPER (0xffff << 16) +#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) +#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) +#define AT91_ADC_TRGR_NONE (0 << 0) +#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) #define AT91_ADC_CHAN(st, ch) \ (st->registers->channel_base + (ch * 4)) |