summaryrefslogtreecommitdiffstats
path: root/drivers/iio/gyro/adxrs450.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/gyro/adxrs450.c')
-rw-r--r--drivers/iio/gyro/adxrs450.c497
1 files changed, 497 insertions, 0 deletions
diff --git a/drivers/iio/gyro/adxrs450.c b/drivers/iio/gyro/adxrs450.c
new file mode 100644
index 00000000000..d9d43831c38
--- /dev/null
+++ b/drivers/iio/gyro/adxrs450.c
@@ -0,0 +1,497 @@
+/*
+ * ADXRS450/ADXRS453 Digital Output Gyroscope Driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADXRS450_STARTUP_DELAY 50 /* ms */
+
+/* The MSB for the spi commands */
+#define ADXRS450_SENSOR_DATA (0x20 << 24)
+#define ADXRS450_WRITE_DATA (0x40 << 24)
+#define ADXRS450_READ_DATA (0x80 << 24)
+
+#define ADXRS450_RATE1 0x00 /* Rate Registers */
+#define ADXRS450_TEMP1 0x02 /* Temperature Registers */
+#define ADXRS450_LOCST1 0x04 /* Low CST Memory Registers */
+#define ADXRS450_HICST1 0x06 /* High CST Memory Registers */
+#define ADXRS450_QUAD1 0x08 /* Quad Memory Registers */
+#define ADXRS450_FAULT1 0x0A /* Fault Registers */
+#define ADXRS450_PID1 0x0C /* Part ID Register 1 */
+#define ADXRS450_SNH 0x0E /* Serial Number Registers, 4 bytes */
+#define ADXRS450_SNL 0x10
+#define ADXRS450_DNC1 0x12 /* Dynamic Null Correction Registers */
+/* Check bits */
+#define ADXRS450_P 0x01
+#define ADXRS450_CHK 0x02
+#define ADXRS450_CST 0x04
+#define ADXRS450_PWR 0x08
+#define ADXRS450_POR 0x10
+#define ADXRS450_NVM 0x20
+#define ADXRS450_Q 0x40
+#define ADXRS450_PLL 0x80
+#define ADXRS450_UV 0x100
+#define ADXRS450_OV 0x200
+#define ADXRS450_AMP 0x400
+#define ADXRS450_FAIL 0x800
+
+#define ADXRS450_WRERR_MASK (0x7 << 29)
+
+#define ADXRS450_MAX_RX 4
+#define ADXRS450_MAX_TX 4
+
+#define ADXRS450_GET_ST(a) ((a >> 26) & 0x3)
+
+enum {
+ ID_ADXRS450,
+ ID_ADXRS453,
+};
+
+/**
+ * struct adxrs450_state - device instance specific data
+ * @us: actual spi_device
+ * @buf_lock: mutex to protect tx and rx
+ * @tx: transmit buffer
+ * @rx: receive buffer
+ **/
+struct adxrs450_state {
+ struct spi_device *us;
+ struct mutex buf_lock;
+ __be32 tx ____cacheline_aligned;
+ __be32 rx;
+
+};
+
+/**
+ * adxrs450_spi_read_reg_16() - read 2 bytes from a register pair
+ * @indio_dev: device associated with child of actual iio_dev
+ * @reg_address: the address of the lower of the two registers, which should be
+ * an even address, the second register's address is reg_address + 1.
+ * @val: somewhere to pass back the value read
+ **/
+static int adxrs450_spi_read_reg_16(struct iio_dev *indio_dev,
+ u8 reg_address,
+ u16 *val)
+{
+ struct spi_message msg;
+ struct adxrs450_state *st = iio_priv(indio_dev);
+ u32 tx;
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &st->tx,
+ .bits_per_word = 8,
+ .len = sizeof(st->tx),
+ .cs_change = 1,
+ }, {
+ .rx_buf = &st->rx,
+ .bits_per_word = 8,
+ .len = sizeof(st->rx),
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ tx = ADXRS450_READ_DATA | (reg_address << 17);
+
+ if (!(hweight32(tx) & 1))
+ tx |= ADXRS450_P;
+
+ st->tx = cpu_to_be32(tx);
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ ret = spi_sync(st->us, &msg);
+ if (ret) {
+ dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n",
+ reg_address);
+ goto error_ret;
+ }
+
+ *val = (be32_to_cpu(st->rx) >> 5) & 0xFFFF;
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adxrs450_spi_write_reg_16() - write 2 bytes data to a register pair
+ * @indio_dev: device associated with child of actual actual iio_dev
+ * @reg_address: the address of the lower of the two registers,which should be
+ * an even address, the second register's address is reg_address + 1.
+ * @val: value to be written.
+ **/
+static int adxrs450_spi_write_reg_16(struct iio_dev *indio_dev,
+ u8 reg_address,
+ u16 val)
+{
+ struct adxrs450_state *st = iio_priv(indio_dev);
+ u32 tx;
+ int ret;
+
+ mutex_lock(&st->buf_lock);
+ tx = ADXRS450_WRITE_DATA | (reg_address << 17) | (val << 1);
+
+ if (!(hweight32(tx) & 1))
+ tx |= ADXRS450_P;
+
+ st->tx = cpu_to_be32(tx);
+ ret = spi_write(st->us, &st->tx, sizeof(st->tx));
+ if (ret)
+ dev_err(&st->us->dev, "problem while writing 16 bit register 0x%02x\n",
+ reg_address);
+ usleep_range(100, 1000); /* enforce sequential transfer delay 0.1ms */
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adxrs450_spi_sensor_data() - read 2 bytes sensor data
+ * @indio_dev: device associated with child of actual iio_dev
+ * @val: somewhere to pass back the value read
+ **/
+static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val)
+{
+ struct spi_message msg;
+ struct adxrs450_state *st = iio_priv(indio_dev);
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &st->tx,
+ .bits_per_word = 8,
+ .len = sizeof(st->tx),
+ .cs_change = 1,
+ }, {
+ .rx_buf = &st->rx,
+ .bits_per_word = 8,
+ .len = sizeof(st->rx),
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx = cpu_to_be32(ADXRS450_SENSOR_DATA);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ ret = spi_sync(st->us, &msg);
+ if (ret) {
+ dev_err(&st->us->dev, "Problem while reading sensor data\n");
+ goto error_ret;
+ }
+
+ *val = (be32_to_cpu(st->rx) >> 10) & 0xFFFF;
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adxrs450_spi_initial() - use for initializing procedure.
+ * @st: device instance specific data
+ * @val: somewhere to pass back the value read
+ * @chk: Whether to perform fault check
+ **/
+static int adxrs450_spi_initial(struct adxrs450_state *st,
+ u32 *val, char chk)
+{
+ struct spi_message msg;
+ int ret;
+ u32 tx;
+ struct spi_transfer xfers = {
+ .tx_buf = &st->tx,
+ .rx_buf = &st->rx,
+ .bits_per_word = 8,
+ .len = sizeof(st->tx),
+ };
+
+ mutex_lock(&st->buf_lock);
+ tx = ADXRS450_SENSOR_DATA;
+ if (chk)
+ tx |= (ADXRS450_CHK | ADXRS450_P);
+ st->tx = cpu_to_be32(tx);
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers, &msg);
+ ret = spi_sync(st->us, &msg);
+ if (ret) {
+ dev_err(&st->us->dev, "Problem while reading initializing data\n");
+ goto error_ret;
+ }
+
+ *val = be32_to_cpu(st->rx);
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/* Recommended Startup Sequence by spec */
+static int adxrs450_initial_setup(struct iio_dev *indio_dev)
+{
+ u32 t;
+ u16 data;
+ int ret;
+ struct adxrs450_state *st = iio_priv(indio_dev);
+
+ msleep(ADXRS450_STARTUP_DELAY*2);
+ ret = adxrs450_spi_initial(st, &t, 1);
+ if (ret)
+ return ret;
+ if (t != 0x01)
+ dev_warn(&st->us->dev, "The initial power on response is not correct! Restart without reset?\n");
+
+ msleep(ADXRS450_STARTUP_DELAY);
+ ret = adxrs450_spi_initial(st, &t, 0);
+ if (ret)
+ return ret;
+
+ msleep(ADXRS450_STARTUP_DELAY);
+ ret = adxrs450_spi_initial(st, &t, 0);
+ if (ret)
+ return ret;
+ if (((t & 0xff) | 0x01) != 0xff || ADXRS450_GET_ST(t) != 2) {
+ dev_err(&st->us->dev, "The second response is not correct!\n");
+ return -EIO;
+
+ }
+ ret = adxrs450_spi_initial(st, &t, 0);
+ if (ret)
+ return ret;
+ if (((t & 0xff) | 0x01) != 0xff || ADXRS450_GET_ST(t) != 2) {
+ dev_err(&st->us->dev, "The third response is not correct!\n");
+ return -EIO;
+
+ }
+ ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_FAULT1, &data);
+ if (ret)
+ return ret;
+ if (data & 0x0fff) {
+ dev_err(&st->us->dev, "The device is not in normal status!\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int adxrs450_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ int ret;
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (val < -0x400 || val >= 0x400)
+ return -EINVAL;
+ ret = adxrs450_spi_write_reg_16(indio_dev,
+ ADXRS450_DNC1, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int adxrs450_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ int ret;
+ s16 t;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ ret = adxrs450_spi_sensor_data(indio_dev, &t);
+ if (ret)
+ break;
+ *val = t;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_TEMP:
+ ret = adxrs450_spi_read_reg_16(indio_dev,
+ ADXRS450_TEMP1, &t);
+ if (ret)
+ break;
+ *val = (t >> 6) + 225;
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = 0;
+ *val2 = 218166;
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_TEMP:
+ *val = 200;
+ *val2 = 0;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW:
+ ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_QUAD1, &t);
+ if (ret)
+ break;
+ *val = t;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_DNC1, &t);
+ if (ret)
+ break;
+ *val = sign_extend32(t, 9);
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct iio_chan_spec adxrs450_channels[2][2] = {
+ [ID_ADXRS450] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }
+ },
+ [ID_ADXRS453] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT,
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }
+ },
+};
+
+static const struct iio_info adxrs450_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &adxrs450_read_raw,
+ .write_raw = &adxrs450_write_raw,
+};
+
+static int adxrs450_probe(struct spi_device *spi)
+{
+ int ret;
+ struct adxrs450_state *st;
+ struct iio_dev *indio_dev;
+
+ /* setup the industrialio driver allocated elements */
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ st = iio_priv(indio_dev);
+ st->us = spi;
+ mutex_init(&st->buf_lock);
+ /* This is only used for removal purposes */
+ spi_set_drvdata(spi, indio_dev);
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &adxrs450_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels =
+ adxrs450_channels[spi_get_device_id(spi)->driver_data];
+ indio_dev->num_channels = ARRAY_SIZE(adxrs450_channels);
+ indio_dev->name = spi->dev.driver->name;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_free_dev;
+
+ /* Get the device into a sane initial state */
+ ret = adxrs450_initial_setup(indio_dev);
+ if (ret)
+ goto error_initial;
+ return 0;
+error_initial:
+ iio_device_unregister(indio_dev);
+error_free_dev:
+ iio_device_free(indio_dev);
+
+error_ret:
+ return ret;
+}
+
+static int adxrs450_remove(struct spi_device *spi)
+{
+ iio_device_unregister(spi_get_drvdata(spi));
+ iio_device_free(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id adxrs450_id[] = {
+ {"adxrs450", ID_ADXRS450},
+ {"adxrs453", ID_ADXRS453},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, adxrs450_id);
+
+static struct spi_driver adxrs450_driver = {
+ .driver = {
+ .name = "adxrs450",
+ .owner = THIS_MODULE,
+ },
+ .probe = adxrs450_probe,
+ .remove = adxrs450_remove,
+ .id_table = adxrs450_id,
+};
+module_spi_driver(adxrs450_driver);
+
+MODULE_AUTHOR("Cliff Cai <cliff.cai@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices ADXRS450/ADXRS453 Gyroscope SPI driver");
+MODULE_LICENSE("GPL v2");