summaryrefslogtreecommitdiffstats
path: root/drivers/iio/gyro
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/gyro')
-rw-r--r--drivers/iio/gyro/Kconfig55
-rw-r--r--drivers/iio/gyro/Makefile14
-rw-r--r--drivers/iio/gyro/adis16080.c259
-rw-r--r--drivers/iio/gyro/adxrs450.c494
-rw-r--r--drivers/iio/gyro/hid-sensor-gyro-3d.c3
-rw-r--r--drivers/iio/gyro/itg3200_buffer.c156
-rw-r--r--drivers/iio/gyro/itg3200_core.c401
-rw-r--r--drivers/iio/gyro/st_gyro.h45
-rw-r--r--drivers/iio/gyro/st_gyro_buffer.c114
-rw-r--r--drivers/iio/gyro/st_gyro_core.c368
-rw-r--r--drivers/iio/gyro/st_gyro_i2c.c84
-rw-r--r--drivers/iio/gyro/st_gyro_spi.c83
12 files changed, 2074 insertions, 2 deletions
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 96b68f63a90..6be4628faff 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -3,6 +3,13 @@
#
menu "Digital gyroscope sensors"
+config ADIS16080
+ tristate "Analog Devices ADIS16080/100 Yaw Rate Gyroscope with SPI driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw
+ Rate Gyroscope with SPI.
+
config ADIS16136
tristate "Analog devices ADIS16136 and similar gyroscopes driver"
depends on SPI_MASTER
@@ -12,6 +19,16 @@ config ADIS16136
Say yes here to build support for the Analog Devices ADIS16133, ADIS16135,
ADIS16136 gyroscope devices.
+config ADXRS450
+ tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices ADXRS450 and ADXRS453
+ programmable digital output gyroscope.
+
+ This driver can also be built as a module. If so, the module
+ will be called adxrs450.
+
config HID_SENSOR_GYRO_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
@@ -23,4 +40,42 @@ config HID_SENSOR_GYRO_3D
Say yes here to build support for the HID SENSOR
Gyroscope 3D.
+config IIO_ST_GYRO_3AXIS
+ tristate "STMicroelectronics gyroscopes 3-Axis Driver"
+ depends on (I2C || SPI_MASTER) && SYSFS
+ select IIO_ST_SENSORS_CORE
+ select IIO_ST_GYRO_I2C_3AXIS if (I2C)
+ select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER)
+ select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+ select IIO_ST_GYRO_BUFFER if (IIO_TRIGGERED_BUFFER)
+ help
+ Say yes here to build support for STMicroelectronics gyroscopes:
+ L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.
+
+ This driver can also be built as a module. If so, will be created
+ these modules:
+ - st_gyro (core functions for the driver [it is mandatory]);
+ - st_gyro_i2c (necessary for the I2C devices [optional*]);
+ - st_gyro_spi (necessary for the SPI devices [optional*]);
+
+ (*) one of these is necessary to do something.
+
+config IIO_ST_GYRO_I2C_3AXIS
+ tristate
+ depends on IIO_ST_GYRO_3AXIS
+ depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_GYRO_SPI_3AXIS
+ tristate
+ depends on IIO_ST_GYRO_3AXIS
+ depends on IIO_ST_SENSORS_SPI
+
+config ITG3200
+ tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
+ depends on I2C
+ select IIO_TRIGGERED_BUFFER if IIO_BUFFER
+ help
+ Say yes here to add support for the InvenSense ITG3200 digital
+ 3-axis gyroscope sensor.
+
endmenu
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index 702a058907e..225d289082e 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -2,5 +2,19 @@
# Makefile for industrial I/O gyroscope sensor drivers
#
+obj-$(CONFIG_ADIS16080) += adis16080.o
obj-$(CONFIG_ADIS16136) += adis16136.o
+obj-$(CONFIG_ADXRS450) += adxrs450.o
+
obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
+
+itg3200-y := itg3200_core.o
+itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o
+obj-$(CONFIG_ITG3200) += itg3200.o
+
+obj-$(CONFIG_IIO_ST_GYRO_3AXIS) += st_gyro.o
+st_gyro-y := st_gyro_core.o
+st_gyro-$(CONFIG_IIO_BUFFER) += st_gyro_buffer.o
+
+obj-$(CONFIG_IIO_ST_GYRO_I2C_3AXIS) += st_gyro_i2c.o
+obj-$(CONFIG_IIO_ST_GYRO_SPI_3AXIS) += st_gyro_spi.o
diff --git a/drivers/iio/gyro/adis16080.c b/drivers/iio/gyro/adis16080.c
new file mode 100644
index 00000000000..1861287911f
--- /dev/null
+++ b/drivers/iio/gyro/adis16080.c
@@ -0,0 +1,259 @@
+/*
+ * ADIS16080/100 Yaw Rate Gyroscope with SPI driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADIS16080_DIN_GYRO (0 << 10) /* Gyroscope output */
+#define ADIS16080_DIN_TEMP (1 << 10) /* Temperature output */
+#define ADIS16080_DIN_AIN1 (2 << 10)
+#define ADIS16080_DIN_AIN2 (3 << 10)
+
+/*
+ * 1: Write contents on DIN to control register.
+ * 0: No changes to control register.
+ */
+
+#define ADIS16080_DIN_WRITE (1 << 15)
+
+struct adis16080_chip_info {
+ int scale_val;
+ int scale_val2;
+};
+
+/**
+ * struct adis16080_state - device instance specific data
+ * @us: actual spi_device to write data
+ * @info: chip specific parameters
+ * @buf: transmit or receive buffer
+ **/
+struct adis16080_state {
+ struct spi_device *us;
+ const struct adis16080_chip_info *info;
+
+ __be16 buf ____cacheline_aligned;
+};
+
+static int adis16080_read_sample(struct iio_dev *indio_dev,
+ u16 addr, int *val)
+{
+ struct adis16080_state *st = iio_priv(indio_dev);
+ struct spi_message m;
+ int ret;
+ struct spi_transfer t[] = {
+ {
+ .tx_buf = &st->buf,
+ .len = 2,
+ .cs_change = 1,
+ }, {
+ .rx_buf = &st->buf,
+ .len = 2,
+ },
+ };
+
+ st->buf = cpu_to_be16(addr | ADIS16080_DIN_WRITE);
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+
+ ret = spi_sync(st->us, &m);
+ if (ret == 0)
+ *val = sign_extend32(be16_to_cpu(st->buf), 11);
+
+ return ret;
+}
+
+static int adis16080_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct adis16080_state *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ ret = adis16080_read_sample(indio_dev, chan->address, val);
+ mutex_unlock(&indio_dev->mlock);
+ return ret ? ret : IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = st->info->scale_val;
+ *val2 = st->info->scale_val2;
+ return IIO_VAL_FRACTIONAL;
+ case IIO_VOLTAGE:
+ /* VREF = 5V, 12 bits */
+ *val = 5000;
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_TEMP:
+ /* 85 C = 585, 25 C = 0 */
+ *val = 85000 - 25000;
+ *val2 = 585;
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ /* 2.5 V = 0 */
+ *val = 2048;
+ return IIO_VAL_INT;
+ case IIO_TEMP:
+ /* 85 C = 585, 25 C = 0 */
+ *val = DIV_ROUND_CLOSEST(25 * 585, 85 - 25);
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16080_channels[] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ .address = ADIS16080_DIN_GYRO,
+ }, {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+ .address = ADIS16080_DIN_AIN1,
+ }, {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+ .address = ADIS16080_DIN_AIN2,
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+ .address = ADIS16080_DIN_TEMP,
+ }
+};
+
+static const struct iio_info adis16080_info = {
+ .read_raw = &adis16080_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+enum {
+ ID_ADIS16080,
+ ID_ADIS16100,
+};
+
+static const struct adis16080_chip_info adis16080_chip_info[] = {
+ [ID_ADIS16080] = {
+ /* 80 degree = 819, 819 rad = 46925 degree */
+ .scale_val = 80,
+ .scale_val2 = 46925,
+ },
+ [ID_ADIS16100] = {
+ /* 300 degree = 1230, 1230 rad = 70474 degree */
+ .scale_val = 300,
+ .scale_val2 = 70474,
+ },
+};
+
+static int adis16080_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ int ret;
+ struct adis16080_state *st;
+ struct iio_dev *indio_dev;
+
+ /* setup the industrialio driver allocated elements */
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ st = iio_priv(indio_dev);
+ /* this is only used for removal purposes */
+ spi_set_drvdata(spi, indio_dev);
+
+ /* Allocate the comms buffers */
+ st->us = spi;
+ st->info = &adis16080_chip_info[id->driver_data];
+
+ indio_dev->name = spi->dev.driver->name;
+ indio_dev->channels = adis16080_channels;
+ indio_dev->num_channels = ARRAY_SIZE(adis16080_channels);
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &adis16080_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_free_dev;
+ return 0;
+
+error_free_dev:
+ iio_device_free(indio_dev);
+error_ret:
+ return ret;
+}
+
+static int adis16080_remove(struct spi_device *spi)
+{
+ iio_device_unregister(spi_get_drvdata(spi));
+ iio_device_free(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id adis16080_ids[] = {
+ { "adis16080", ID_ADIS16080 },
+ { "adis16100", ID_ADIS16100 },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, adis16080_ids);
+
+static struct spi_driver adis16080_driver = {
+ .driver = {
+ .name = "adis16080",
+ .owner = THIS_MODULE,
+ },
+ .probe = adis16080_probe,
+ .remove = adis16080_remove,
+ .id_table = adis16080_ids,
+};
+module_spi_driver(adis16080_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16080/100 Yaw Rate Gyroscope Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/adxrs450.c b/drivers/iio/gyro/adxrs450.c
new file mode 100644
index 00000000000..5b79953f701
--- /dev/null
+++ b/drivers/iio/gyro/adxrs450.c
@@ -0,0 +1,494 @@
+/*
+ * ADXRS450/ADXRS453 Digital Output Gyroscope Driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADXRS450_STARTUP_DELAY 50 /* ms */
+
+/* The MSB for the spi commands */
+#define ADXRS450_SENSOR_DATA (0x20 << 24)
+#define ADXRS450_WRITE_DATA (0x40 << 24)
+#define ADXRS450_READ_DATA (0x80 << 24)
+
+#define ADXRS450_RATE1 0x00 /* Rate Registers */
+#define ADXRS450_TEMP1 0x02 /* Temperature Registers */
+#define ADXRS450_LOCST1 0x04 /* Low CST Memory Registers */
+#define ADXRS450_HICST1 0x06 /* High CST Memory Registers */
+#define ADXRS450_QUAD1 0x08 /* Quad Memory Registers */
+#define ADXRS450_FAULT1 0x0A /* Fault Registers */
+#define ADXRS450_PID1 0x0C /* Part ID Register 1 */
+#define ADXRS450_SNH 0x0E /* Serial Number Registers, 4 bytes */
+#define ADXRS450_SNL 0x10
+#define ADXRS450_DNC1 0x12 /* Dynamic Null Correction Registers */
+/* Check bits */
+#define ADXRS450_P 0x01
+#define ADXRS450_CHK 0x02
+#define ADXRS450_CST 0x04
+#define ADXRS450_PWR 0x08
+#define ADXRS450_POR 0x10
+#define ADXRS450_NVM 0x20
+#define ADXRS450_Q 0x40
+#define ADXRS450_PLL 0x80
+#define ADXRS450_UV 0x100
+#define ADXRS450_OV 0x200
+#define ADXRS450_AMP 0x400
+#define ADXRS450_FAIL 0x800
+
+#define ADXRS450_WRERR_MASK (0x7 << 29)
+
+#define ADXRS450_MAX_RX 4
+#define ADXRS450_MAX_TX 4
+
+#define ADXRS450_GET_ST(a) ((a >> 26) & 0x3)
+
+enum {
+ ID_ADXRS450,
+ ID_ADXRS453,
+};
+
+/**
+ * struct adxrs450_state - device instance specific data
+ * @us: actual spi_device
+ * @buf_lock: mutex to protect tx and rx
+ * @tx: transmit buffer
+ * @rx: receive buffer
+ **/
+struct adxrs450_state {
+ struct spi_device *us;
+ struct mutex buf_lock;
+ __be32 tx ____cacheline_aligned;
+ __be32 rx;
+
+};
+
+/**
+ * adxrs450_spi_read_reg_16() - read 2 bytes from a register pair
+ * @indio_dev: device associated with child of actual iio_dev
+ * @reg_address: the address of the lower of the two registers, which should be
+ * an even address, the second register's address is reg_address + 1.
+ * @val: somewhere to pass back the value read
+ **/
+static int adxrs450_spi_read_reg_16(struct iio_dev *indio_dev,
+ u8 reg_address,
+ u16 *val)
+{
+ struct spi_message msg;
+ struct adxrs450_state *st = iio_priv(indio_dev);
+ u32 tx;
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &st->tx,
+ .bits_per_word = 8,
+ .len = sizeof(st->tx),
+ .cs_change = 1,
+ }, {
+ .rx_buf = &st->rx,
+ .bits_per_word = 8,
+ .len = sizeof(st->rx),
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ tx = ADXRS450_READ_DATA | (reg_address << 17);
+
+ if (!(hweight32(tx) & 1))
+ tx |= ADXRS450_P;
+
+ st->tx = cpu_to_be32(tx);
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ ret = spi_sync(st->us, &msg);
+ if (ret) {
+ dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n",
+ reg_address);
+ goto error_ret;
+ }
+
+ *val = (be32_to_cpu(st->rx) >> 5) & 0xFFFF;
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adxrs450_spi_write_reg_16() - write 2 bytes data to a register pair
+ * @indio_dev: device associated with child of actual actual iio_dev
+ * @reg_address: the address of the lower of the two registers,which should be
+ * an even address, the second register's address is reg_address + 1.
+ * @val: value to be written.
+ **/
+static int adxrs450_spi_write_reg_16(struct iio_dev *indio_dev,
+ u8 reg_address,
+ u16 val)
+{
+ struct adxrs450_state *st = iio_priv(indio_dev);
+ u32 tx;
+ int ret;
+
+ mutex_lock(&st->buf_lock);
+ tx = ADXRS450_WRITE_DATA | (reg_address << 17) | (val << 1);
+
+ if (!(hweight32(tx) & 1))
+ tx |= ADXRS450_P;
+
+ st->tx = cpu_to_be32(tx);
+ ret = spi_write(st->us, &st->tx, sizeof(st->tx));
+ if (ret)
+ dev_err(&st->us->dev, "problem while writing 16 bit register 0x%02x\n",
+ reg_address);
+ usleep_range(100, 1000); /* enforce sequential transfer delay 0.1ms */
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adxrs450_spi_sensor_data() - read 2 bytes sensor data
+ * @indio_dev: device associated with child of actual iio_dev
+ * @val: somewhere to pass back the value read
+ **/
+static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val)
+{
+ struct spi_message msg;
+ struct adxrs450_state *st = iio_priv(indio_dev);
+ int ret;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &st->tx,
+ .bits_per_word = 8,
+ .len = sizeof(st->tx),
+ .cs_change = 1,
+ }, {
+ .rx_buf = &st->rx,
+ .bits_per_word = 8,
+ .len = sizeof(st->rx),
+ },
+ };
+
+ mutex_lock(&st->buf_lock);
+ st->tx = cpu_to_be32(ADXRS450_SENSOR_DATA);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ ret = spi_sync(st->us, &msg);
+ if (ret) {
+ dev_err(&st->us->dev, "Problem while reading sensor data\n");
+ goto error_ret;
+ }
+
+ *val = (be32_to_cpu(st->rx) >> 10) & 0xFFFF;
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/**
+ * adxrs450_spi_initial() - use for initializing procedure.
+ * @st: device instance specific data
+ * @val: somewhere to pass back the value read
+ * @chk: Whether to perform fault check
+ **/
+static int adxrs450_spi_initial(struct adxrs450_state *st,
+ u32 *val, char chk)
+{
+ int ret;
+ u32 tx;
+ struct spi_transfer xfers = {
+ .tx_buf = &st->tx,
+ .rx_buf = &st->rx,
+ .bits_per_word = 8,
+ .len = sizeof(st->tx),
+ };
+
+ mutex_lock(&st->buf_lock);
+ tx = ADXRS450_SENSOR_DATA;
+ if (chk)
+ tx |= (ADXRS450_CHK | ADXRS450_P);
+ st->tx = cpu_to_be32(tx);
+ ret = spi_sync_transfer(st->us, &xfers, 1);
+ if (ret) {
+ dev_err(&st->us->dev, "Problem while reading initializing data\n");
+ goto error_ret;
+ }
+
+ *val = be32_to_cpu(st->rx);
+
+error_ret:
+ mutex_unlock(&st->buf_lock);
+ return ret;
+}
+
+/* Recommended Startup Sequence by spec */
+static int adxrs450_initial_setup(struct iio_dev *indio_dev)
+{
+ u32 t;
+ u16 data;
+ int ret;
+ struct adxrs450_state *st = iio_priv(indio_dev);
+
+ msleep(ADXRS450_STARTUP_DELAY*2);
+ ret = adxrs450_spi_initial(st, &t, 1);
+ if (ret)
+ return ret;
+ if (t != 0x01)
+ dev_warn(&st->us->dev, "The initial power on response is not correct! Restart without reset?\n");
+
+ msleep(ADXRS450_STARTUP_DELAY);
+ ret = adxrs450_spi_initial(st, &t, 0);
+ if (ret)
+ return ret;
+
+ msleep(ADXRS450_STARTUP_DELAY);
+ ret = adxrs450_spi_initial(st, &t, 0);
+ if (ret)
+ return ret;
+ if (((t & 0xff) | 0x01) != 0xff || ADXRS450_GET_ST(t) != 2) {
+ dev_err(&st->us->dev, "The second response is not correct!\n");
+ return -EIO;
+
+ }
+ ret = adxrs450_spi_initial(st, &t, 0);
+ if (ret)
+ return ret;
+ if (((t & 0xff) | 0x01) != 0xff || ADXRS450_GET_ST(t) != 2) {
+ dev_err(&st->us->dev, "The third response is not correct!\n");
+ return -EIO;
+
+ }
+ ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_FAULT1, &data);
+ if (ret)
+ return ret;
+ if (data & 0x0fff) {
+ dev_err(&st->us->dev, "The device is not in normal status!\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int adxrs450_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ int ret;
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ if (val < -0x400 || val >= 0x400)
+ return -EINVAL;
+ ret = adxrs450_spi_write_reg_16(indio_dev,
+ ADXRS450_DNC1, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int adxrs450_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ int ret;
+ s16 t;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ ret = adxrs450_spi_sensor_data(indio_dev, &t);
+ if (ret)
+ break;
+ *val = t;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_TEMP:
+ ret = adxrs450_spi_read_reg_16(indio_dev,
+ ADXRS450_TEMP1, &t);
+ if (ret)
+ break;
+ *val = (t >> 6) + 225;
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = 0;
+ *val2 = 218166;
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_TEMP:
+ *val = 200;
+ *val2 = 0;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW:
+ ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_QUAD1, &t);
+ if (ret)
+ break;
+ *val = t;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_DNC1, &t);
+ if (ret)
+ break;
+ *val = sign_extend32(t, 9);
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct iio_chan_spec adxrs450_channels[2][2] = {
+ [ID_ADXRS450] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }
+ },
+ [ID_ADXRS453] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT,
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }
+ },
+};
+
+static const struct iio_info adxrs450_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &adxrs450_read_raw,
+ .write_raw = &adxrs450_write_raw,
+};
+
+static int adxrs450_probe(struct spi_device *spi)
+{
+ int ret;
+ struct adxrs450_state *st;
+ struct iio_dev *indio_dev;
+
+ /* setup the industrialio driver allocated elements */
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ st = iio_priv(indio_dev);
+ st->us = spi;
+ mutex_init(&st->buf_lock);
+ /* This is only used for removal purposes */
+ spi_set_drvdata(spi, indio_dev);
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &adxrs450_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels =
+ adxrs450_channels[spi_get_device_id(spi)->driver_data];
+ indio_dev->num_channels = ARRAY_SIZE(adxrs450_channels);
+ indio_dev->name = spi->dev.driver->name;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_free_dev;
+
+ /* Get the device into a sane initial state */
+ ret = adxrs450_initial_setup(indio_dev);
+ if (ret)
+ goto error_initial;
+ return 0;
+error_initial:
+ iio_device_unregister(indio_dev);
+error_free_dev:
+ iio_device_free(indio_dev);
+
+error_ret:
+ return ret;
+}
+
+static int adxrs450_remove(struct spi_device *spi)
+{
+ iio_device_unregister(spi_get_drvdata(spi));
+ iio_device_free(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id adxrs450_id[] = {
+ {"adxrs450", ID_ADXRS450},
+ {"adxrs453", ID_ADXRS453},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, adxrs450_id);
+
+static struct spi_driver adxrs450_driver = {
+ .driver = {
+ .name = "adxrs450",
+ .owner = THIS_MODULE,
+ },
+ .probe = adxrs450_probe,
+ .remove = adxrs450_remove,
+ .id_table = adxrs450_id,
+};
+module_spi_driver(adxrs450_driver);
+
+MODULE_AUTHOR("Cliff Cai <cliff.cai@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices ADXRS450/ADXRS453 Gyroscope SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index 06e7cc35450..fcfc83a9f86 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -28,7 +28,6 @@
#include <linux/iio/buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
-#include "../common/hid-sensors/hid-sensor-attributes.h"
#include "../common/hid-sensors/hid-sensor-trigger.h"
/*Format: HID-SENSOR-usage_id_in_hex*/
@@ -44,7 +43,7 @@ enum gyro_3d_channel {
struct gyro_3d_state {
struct hid_sensor_hub_callbacks callbacks;
- struct hid_sensor_iio_common common_attributes;
+ struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX];
u32 gyro_val[GYRO_3D_CHANNEL_MAX];
};
diff --git a/drivers/iio/gyro/itg3200_buffer.c b/drivers/iio/gyro/itg3200_buffer.c
new file mode 100644
index 00000000000..f667d2c8c00
--- /dev/null
+++ b/drivers/iio/gyro/itg3200_buffer.c
@@ -0,0 +1,156 @@
+/*
+ * itg3200_buffer.c -- support InvenSense ITG3200
+ * Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/gyro/itg3200.h>
+
+
+static int itg3200_read_all_channels(struct i2c_client *i2c, __be16 *buf)
+{
+ u8 tx = 0x80 | ITG3200_REG_TEMP_OUT_H;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = i2c->addr,
+ .flags = i2c->flags,
+ .len = 1,
+ .buf = &tx,
+ },
+ {
+ .addr = i2c->addr,
+ .flags = i2c->flags | I2C_M_RD,
+ .len = ITG3200_SCAN_ELEMENTS * sizeof(s16),
+ .buf = (char *)&buf,
+ },
+ };
+
+ return i2c_transfer(i2c->adapter, msg, 2);
+}
+
+static irqreturn_t itg3200_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct itg3200 *st = iio_priv(indio_dev);
+ __be16 buf[ITG3200_SCAN_ELEMENTS + sizeof(s64)/sizeof(u16)];
+
+ int ret = itg3200_read_all_channels(st->i2c, buf);
+ if (ret < 0)
+ goto error_ret;
+
+ if (indio_dev->scan_timestamp)
+ memcpy(buf + indio_dev->scan_bytes - sizeof(s64),
+ &pf->timestamp, sizeof(pf->timestamp));
+
+ iio_push_to_buffers(indio_dev, (u8 *)buf);
+ iio_trigger_notify_done(indio_dev->trig);
+
+error_ret:
+ return IRQ_HANDLED;
+}
+
+int itg3200_buffer_configure(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ itg3200_trigger_handler, NULL);
+}
+
+void itg3200_buffer_unconfigure(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+
+
+static int itg3200_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ int ret;
+ u8 msc;
+
+ ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, &msc);
+ if (ret)
+ goto error_ret;
+
+ if (state)
+ msc |= ITG3200_IRQ_DATA_RDY_ENABLE;
+ else
+ msc &= ~ITG3200_IRQ_DATA_RDY_ENABLE;
+
+ ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, msc);
+ if (ret)
+ goto error_ret;
+
+error_ret:
+ return ret;
+
+}
+
+static const struct iio_trigger_ops itg3200_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &itg3200_data_rdy_trigger_set_state,
+};
+
+int itg3200_probe_trigger(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct itg3200 *st = iio_priv(indio_dev);
+
+ st->trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
+ indio_dev->id);
+ if (!st->trig)
+ return -ENOMEM;
+
+ ret = request_irq(st->i2c->irq,
+ &iio_trigger_generic_data_rdy_poll,
+ IRQF_TRIGGER_RISING,
+ "itg3200_data_rdy",
+ st->trig);
+ if (ret)
+ goto error_free_trig;
+
+
+ st->trig->dev.parent = &st->i2c->dev;
+ st->trig->ops = &itg3200_trigger_ops;
+ st->trig->private_data = indio_dev;
+ ret = iio_trigger_register(st->trig);
+ if (ret)
+ goto error_free_irq;
+
+ /* select default trigger */
+ indio_dev->trig = st->trig;
+
+ return 0;
+
+error_free_irq:
+ free_irq(st->i2c->irq, st->trig);
+error_free_trig:
+ iio_trigger_free(st->trig);
+ return ret;
+}
+
+void itg3200_remove_trigger(struct iio_dev *indio_dev)
+{
+ struct itg3200 *st = iio_priv(indio_dev);
+
+ iio_trigger_unregister(st->trig);
+ free_irq(st->i2c->irq, st->trig);
+ iio_trigger_free(st->trig);
+}
diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
new file mode 100644
index 00000000000..df2e6aa5d73
--- /dev/null
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -0,0 +1,401 @@
+/*
+ * itg3200_core.c -- support InvenSense ITG3200
+ * Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO:
+ * - Support digital low pass filter
+ * - Support power management
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/gyro/itg3200.h>
+
+
+int itg3200_write_reg_8(struct iio_dev *indio_dev,
+ u8 reg_address, u8 val)
+{
+ struct itg3200 *st = iio_priv(indio_dev);
+
+ return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val);
+}
+
+int itg3200_read_reg_8(struct iio_dev *indio_dev,
+ u8 reg_address, u8 *val)
+{
+ struct itg3200 *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(st->i2c, reg_address);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return 0;
+}
+
+static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address,
+ int *val)
+{
+ struct itg3200 *st = iio_priv(indio_dev);
+ struct i2c_client *client = st->i2c;
+ int ret;
+ s16 out;
+
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .flags = client->flags,
+ .len = 1,
+ .buf = (char *)&lower_reg_address,
+ },
+ {
+ .addr = client->addr,
+ .flags = client->flags | I2C_M_RD,
+ .len = 2,
+ .buf = (char *)&out,
+ },
+ };
+
+ lower_reg_address |= 0x80;
+ ret = i2c_transfer(client->adapter, msg, 2);
+ be16_to_cpus(&out);
+ *val = out;
+
+ return (ret == 2) ? 0 : ret;
+}
+
+static int itg3200_read_raw(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2, long info)
+{
+ int ret = 0;
+ u8 reg;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ reg = (u8)chan->address;
+ ret = itg3200_read_reg_s16(indio_dev, reg, val);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ if (chan->type == IIO_TEMP)
+ *val2 = 1000000000/280;
+ else
+ *val2 = 1214142; /* (1 / 14,375) * (PI / 180) */
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ /* Only the temperature channel has an offset */
+ *val = 23000;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static ssize_t itg3200_read_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ int ret, sps;
+ u8 val;
+
+ ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
+ if (ret)
+ return ret;
+
+ sps = (val & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
+
+ ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, &val);
+ if (ret)
+ return ret;
+
+ sps /= val + 1;
+
+ return sprintf(buf, "%d\n", sps);
+}
+
+static ssize_t itg3200_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ unsigned val;
+ int ret;
+ u8 t;
+
+ ret = kstrtouint(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&indio_dev->mlock);
+
+ ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
+ if (ret)
+ goto err_ret;
+
+ if (val == 0) {
+ ret = -EINVAL;
+ goto err_ret;
+ }
+ t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
+
+ ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, t);
+
+err_ret:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret ? ret : len;
+}
+
+/*
+ * Reset device and internal registers to the power-up-default settings
+ * Use the gyro clock as reference, as suggested by the datasheet
+ */
+static int itg3200_reset(struct iio_dev *indio_dev)
+{
+ struct itg3200 *st = iio_priv(indio_dev);
+ int ret;
+
+ dev_dbg(&st->i2c->dev, "reset device");
+
+ ret = itg3200_write_reg_8(indio_dev,
+ ITG3200_REG_POWER_MANAGEMENT,
+ ITG3200_RESET);
+ if (ret) {
+ dev_err(&st->i2c->dev, "error resetting device");
+ goto error_ret;
+ }
+
+ /* Wait for PLL (1ms according to datasheet) */
+ udelay(1500);
+
+ ret = itg3200_write_reg_8(indio_dev,
+ ITG3200_REG_IRQ_CONFIG,
+ ITG3200_IRQ_ACTIVE_HIGH |
+ ITG3200_IRQ_PUSH_PULL |
+ ITG3200_IRQ_LATCH_50US_PULSE |
+ ITG3200_IRQ_LATCH_CLEAR_ANY);
+
+ if (ret)
+ dev_err(&st->i2c->dev, "error init device");
+
+error_ret:
+ return ret;
+}
+
+/* itg3200_enable_full_scale() - Disables the digital low pass filter */
+static int itg3200_enable_full_scale(struct iio_dev *indio_dev)
+{
+ u8 val;
+ int ret;
+
+ ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
+ if (ret)
+ goto err_ret;
+
+ val |= ITG3200_DLPF_FS_SEL_2000;
+ return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val);
+
+err_ret:
+ return ret;
+}
+
+static int itg3200_initial_setup(struct iio_dev *indio_dev)
+{
+ struct itg3200 *st = iio_priv(indio_dev);
+ int ret;
+ u8 val;
+
+ ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
+ if (ret)
+ goto err_ret;
+
+ if (((val >> 1) & 0x3f) != 0x34) {
+ dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val);
+ ret = -ENXIO;
+ goto err_ret;
+ }
+
+ ret = itg3200_reset(indio_dev);
+ if (ret)
+ goto err_ret;
+
+ ret = itg3200_enable_full_scale(indio_dev);
+err_ret:
+ return ret;
+}
+
+#define ITG3200_TEMP_INFO_MASK (IIO_CHAN_INFO_OFFSET_SHARED_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+ IIO_CHAN_INFO_RAW_SEPARATE_BIT)
+#define ITG3200_GYRO_INFO_MASK (IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+ IIO_CHAN_INFO_RAW_SEPARATE_BIT)
+
+#define ITG3200_ST \
+ { .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE }
+
+#define ITG3200_GYRO_CHAN(_mod) { \
+ .type = IIO_ANGL_VEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_ ## _mod, \
+ .info_mask = ITG3200_GYRO_INFO_MASK, \
+ .address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
+ .scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
+ .scan_type = ITG3200_ST, \
+}
+
+static const struct iio_chan_spec itg3200_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .channel2 = IIO_NO_MOD,
+ .info_mask = ITG3200_TEMP_INFO_MASK,
+ .address = ITG3200_REG_TEMP_OUT_H,
+ .scan_index = ITG3200_SCAN_TEMP,
+ .scan_type = ITG3200_ST,
+ },
+ ITG3200_GYRO_CHAN(X),
+ ITG3200_GYRO_CHAN(Y),
+ ITG3200_GYRO_CHAN(Z),
+ IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
+};
+
+/* IIO device attributes */
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, itg3200_read_frequency,
+ itg3200_write_frequency);
+
+static struct attribute *itg3200_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group itg3200_attribute_group = {
+ .attrs = itg3200_attributes,
+};
+
+static const struct iio_info itg3200_info = {
+ .attrs = &itg3200_attribute_group,
+ .read_raw = &itg3200_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 };
+
+static int itg3200_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct itg3200 *st;
+ struct iio_dev *indio_dev;
+
+ dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq);
+
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+
+ st = iio_priv(indio_dev);
+
+ i2c_set_clientdata(client, indio_dev);
+ st->i2c = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = client->dev.driver->name;
+ indio_dev->channels = itg3200_channels;
+ indio_dev->num_channels = ARRAY_SIZE(itg3200_channels);
+ indio_dev->available_scan_masks = itg3200_available_scan_masks;
+ indio_dev->info = &itg3200_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = itg3200_buffer_configure(indio_dev);
+ if (ret)
+ goto error_free_dev;
+
+ if (client->irq) {
+ ret = itg3200_probe_trigger(indio_dev);
+ if (ret)
+ goto error_unconfigure_buffer;
+ }
+
+ ret = itg3200_initial_setup(indio_dev);
+ if (ret)
+ goto error_remove_trigger;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_remove_trigger;
+
+ return 0;
+
+error_remove_trigger:
+ if (client->irq)
+ itg3200_remove_trigger(indio_dev);
+error_unconfigure_buffer:
+ itg3200_buffer_unconfigure(indio_dev);
+error_free_dev:
+ iio_device_free(indio_dev);
+error_ret:
+ return ret;
+}
+
+static int itg3200_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ if (client->irq)
+ itg3200_remove_trigger(indio_dev);
+
+ itg3200_buffer_unconfigure(indio_dev);
+
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id itg3200_id[] = {
+ { "itg3200", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, itg3200_id);
+
+static struct i2c_driver itg3200_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "itg3200",
+ },
+ .id_table = itg3200_id,
+ .probe = itg3200_probe,
+ .remove = itg3200_remove,
+};
+
+module_i2c_driver(itg3200_driver);
+
+MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>");
+MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
new file mode 100644
index 00000000000..3ad9907bb15
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro.h
@@ -0,0 +1,45 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_GYRO_H
+#define ST_GYRO_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define L3G4200D_GYRO_DEV_NAME "l3g4200d"
+#define LSM330D_GYRO_DEV_NAME "lsm330d_gyro"
+#define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro"
+#define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro"
+#define L3GD20_GYRO_DEV_NAME "l3gd20"
+#define L3GD20H_GYRO_DEV_NAME "l3gd20h"
+#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
+#define LSM330_GYRO_DEV_NAME "lsm330_gyro"
+
+int st_gyro_common_probe(struct iio_dev *indio_dev);
+void st_gyro_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_gyro_allocate_ring(struct iio_dev *indio_dev);
+void st_gyro_deallocate_ring(struct iio_dev *indio_dev);
+int st_gyro_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_GYRO_TRIGGER_SET_STATE (&st_gyro_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_gyro_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_gyro_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_GYRO_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_GYRO_H */
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
new file mode 100644
index 00000000000..da4d122ec7d
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -0,0 +1,114 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_gyro.h"
+
+int st_gyro_trig_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+
+ return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_gyro_buffer_preenable(struct iio_dev *indio_dev)
+{
+ int err;
+
+ err = st_sensors_set_enable(indio_dev, true);
+ if (err < 0)
+ goto st_gyro_set_enable_error;
+
+ err = iio_sw_buffer_preenable(indio_dev);
+
+st_gyro_set_enable_error:
+ return err;
+}
+
+static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ gdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (gdata->buffer_data == NULL) {
+ err = -ENOMEM;
+ goto allocate_memory_error;
+ }
+
+ err = st_sensors_set_axis_enable(indio_dev,
+ (u8)indio_dev->active_scan_mask[0]);
+ if (err < 0)
+ goto st_gyro_buffer_postenable_error;
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err < 0)
+ goto st_gyro_buffer_postenable_error;
+
+ return err;
+
+st_gyro_buffer_postenable_error:
+ kfree(gdata->buffer_data);
+allocate_memory_error:
+ return err;
+}
+
+static int st_gyro_buffer_predisable(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto st_gyro_buffer_predisable_error;
+
+ err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+ if (err < 0)
+ goto st_gyro_buffer_predisable_error;
+
+ err = st_sensors_set_enable(indio_dev, false);
+
+st_gyro_buffer_predisable_error:
+ kfree(gdata->buffer_data);
+ return err;
+}
+
+static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = {
+ .preenable = &st_gyro_buffer_preenable,
+ .postenable = &st_gyro_buffer_postenable,
+ .predisable = &st_gyro_buffer_predisable,
+};
+
+int st_gyro_allocate_ring(struct iio_dev *indio_dev)
+{
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_sensors_trigger_handler, &st_gyro_buffer_setup_ops);
+}
+
+void st_gyro_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes buffer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
new file mode 100644
index 00000000000..fa9b2421998
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -0,0 +1,368 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_gyro.h"
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_GYRO_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c
+
+/* FULLSCALE */
+#define ST_GYRO_FS_AVL_250DPS 250
+#define ST_GYRO_FS_AVL_500DPS 500
+#define ST_GYRO_FS_AVL_2000DPS 2000
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_GYRO_1_WAI_EXP 0xd3
+#define ST_GYRO_1_ODR_ADDR 0x20
+#define ST_GYRO_1_ODR_MASK 0xc0
+#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00
+#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01
+#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02
+#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03
+#define ST_GYRO_1_PW_ADDR 0x20
+#define ST_GYRO_1_PW_MASK 0x08
+#define ST_GYRO_1_FS_ADDR 0x23
+#define ST_GYRO_1_FS_MASK 0x30
+#define ST_GYRO_1_FS_AVL_250_VAL 0x00
+#define ST_GYRO_1_FS_AVL_500_VAL 0x01
+#define ST_GYRO_1_FS_AVL_2000_VAL 0x02
+#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
+#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
+#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
+#define ST_GYRO_1_BDU_ADDR 0x23
+#define ST_GYRO_1_BDU_MASK 0x80
+#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
+#define ST_GYRO_1_DRDY_IRQ_MASK 0x08
+#define ST_GYRO_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_GYRO_2_WAI_EXP 0xd4
+#define ST_GYRO_2_ODR_ADDR 0x20
+#define ST_GYRO_2_ODR_MASK 0xc0
+#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00
+#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01
+#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02
+#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03
+#define ST_GYRO_2_PW_ADDR 0x20
+#define ST_GYRO_2_PW_MASK 0x08
+#define ST_GYRO_2_FS_ADDR 0x23
+#define ST_GYRO_2_FS_MASK 0x30
+#define ST_GYRO_2_FS_AVL_250_VAL 0x00
+#define ST_GYRO_2_FS_AVL_500_VAL 0x01
+#define ST_GYRO_2_FS_AVL_2000_VAL 0x02
+#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
+#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
+#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
+#define ST_GYRO_2_BDU_ADDR 0x23
+#define ST_GYRO_2_BDU_MASK 0x80
+#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
+#define ST_GYRO_2_DRDY_IRQ_MASK 0x08
+#define ST_GYRO_2_MULTIREAD_BIT true
+
+static const struct iio_chan_spec st_gyro_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_X,
+ IIO_MOD_X, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+ ST_GYRO_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Y,
+ IIO_MOD_Y, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+ ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, ST_SENSORS_SCAN_Z,
+ IIO_MOD_Z, IIO_LE, ST_SENSORS_DEFAULT_16_REALBITS,
+ ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_gyro_sensors[] = {
+ {
+ .wai = ST_GYRO_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = L3G4200D_GYRO_DEV_NAME,
+ [1] = LSM330DL_GYRO_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+ .odr = {
+ .addr = ST_GYRO_1_ODR_ADDR,
+ .mask = ST_GYRO_1_ODR_MASK,
+ .odr_avl = {
+ { 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
+ { 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_GYRO_1_PW_ADDR,
+ .mask = ST_GYRO_1_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_GYRO_1_FS_ADDR,
+ .mask = ST_GYRO_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_GYRO_FS_AVL_250DPS,
+ .value = ST_GYRO_1_FS_AVL_250_VAL,
+ .gain = ST_GYRO_1_FS_AVL_250_GAIN,
+ },
+ [1] = {
+ .num = ST_GYRO_FS_AVL_500DPS,
+ .value = ST_GYRO_1_FS_AVL_500_VAL,
+ .gain = ST_GYRO_1_FS_AVL_500_GAIN,
+ },
+ [2] = {
+ .num = ST_GYRO_FS_AVL_2000DPS,
+ .value = ST_GYRO_1_FS_AVL_2000_VAL,
+ .gain = ST_GYRO_1_FS_AVL_2000_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_GYRO_1_BDU_ADDR,
+ .mask = ST_GYRO_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_GYRO_1_DRDY_IRQ_ADDR,
+ .mask = ST_GYRO_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_GYRO_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = L3GD20_GYRO_DEV_NAME,
+ [1] = L3GD20H_GYRO_DEV_NAME,
+ [2] = LSM330D_GYRO_DEV_NAME,
+ [3] = LSM330DLC_GYRO_DEV_NAME,
+ [4] = L3G4IS_GYRO_DEV_NAME,
+ [5] = LSM330_GYRO_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+ .odr = {
+ .addr = ST_GYRO_2_ODR_ADDR,
+ .mask = ST_GYRO_2_ODR_MASK,
+ .odr_avl = {
+ { 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
+ { 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
+ { 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
+ { 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_GYRO_2_PW_ADDR,
+ .mask = ST_GYRO_2_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_GYRO_2_FS_ADDR,
+ .mask = ST_GYRO_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_GYRO_FS_AVL_250DPS,
+ .value = ST_GYRO_2_FS_AVL_250_VAL,
+ .gain = ST_GYRO_2_FS_AVL_250_GAIN,
+ },
+ [1] = {
+ .num = ST_GYRO_FS_AVL_500DPS,
+ .value = ST_GYRO_2_FS_AVL_500_VAL,
+ .gain = ST_GYRO_2_FS_AVL_500_GAIN,
+ },
+ [2] = {
+ .num = ST_GYRO_FS_AVL_2000DPS,
+ .value = ST_GYRO_2_FS_AVL_2000_VAL,
+ .gain = ST_GYRO_2_FS_AVL_2000_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_GYRO_2_BDU_ADDR,
+ .mask = ST_GYRO_2_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_GYRO_2_DRDY_IRQ_ADDR,
+ .mask = ST_GYRO_2_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_gyro_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = gdata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_gyro_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available);
+
+static struct attribute *st_gyro_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_gyro_attribute_group = {
+ .attrs = st_gyro_attributes,
+};
+
+static const struct iio_info gyro_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_gyro_attribute_group,
+ .read_raw = &st_gyro_read_raw,
+ .write_raw = &st_gyro_write_raw,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_gyro_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
+};
+#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
+#else
+#define ST_GYRO_TRIGGER_OPS NULL
+#endif
+
+int st_gyro_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &gyro_info;
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ gdata->multiread_bit = gdata->sensor->multi_read_bit;
+ indio_dev->channels = gdata->sensor->ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &gdata->sensor->fs.fs_avl[0];
+ gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ if (gdata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_gyro_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ err = st_sensors_allocate_trigger(indio_dev,
+ ST_GYRO_TRIGGER_OPS);
+ if (err < 0)
+ goto st_gyro_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_gyro_device_register_error;
+
+ return err;
+
+st_gyro_device_register_error:
+ if (gdata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_gyro_probe_trigger_error:
+ if (gdata->get_irq_data_ready(indio_dev) > 0)
+ st_gyro_deallocate_ring(indio_dev);
+st_gyro_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_gyro_common_probe);
+
+void st_gyro_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (gdata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_gyro_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_gyro_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
new file mode 100644
index 00000000000..8a310500573
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -0,0 +1,84 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_gyro.h"
+
+static int st_gyro_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *gdata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*gdata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ gdata = iio_priv(indio_dev);
+ gdata->dev = &client->dev;
+
+ st_sensors_i2c_configure(indio_dev, client, gdata);
+
+ err = st_gyro_common_probe(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ return 0;
+
+st_gyro_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_gyro_i2c_remove(struct i2c_client *client)
+{
+ st_gyro_common_remove(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id st_gyro_id_table[] = {
+ { L3G4200D_GYRO_DEV_NAME },
+ { LSM330D_GYRO_DEV_NAME },
+ { LSM330DL_GYRO_DEV_NAME },
+ { LSM330DLC_GYRO_DEV_NAME },
+ { L3GD20_GYRO_DEV_NAME },
+ { L3GD20H_GYRO_DEV_NAME },
+ { L3G4IS_GYRO_DEV_NAME },
+ { LSM330_GYRO_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_gyro_id_table);
+
+static struct i2c_driver st_gyro_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-gyro-i2c",
+ },
+ .probe = st_gyro_i2c_probe,
+ .remove = st_gyro_i2c_remove,
+ .id_table = st_gyro_id_table,
+};
+module_i2c_driver(st_gyro_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
new file mode 100644
index 00000000000..f3540390eb2
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -0,0 +1,83 @@
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_gyro.h"
+
+static int st_gyro_spi_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct st_sensor_data *gdata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*gdata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ gdata = iio_priv(indio_dev);
+ gdata->dev = &spi->dev;
+
+ st_sensors_spi_configure(indio_dev, spi, gdata);
+
+ err = st_gyro_common_probe(indio_dev);
+ if (err < 0)
+ goto st_gyro_common_probe_error;
+
+ return 0;
+
+st_gyro_common_probe_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int st_gyro_spi_remove(struct spi_device *spi)
+{
+ st_gyro_common_remove(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static const struct spi_device_id st_gyro_id_table[] = {
+ { L3G4200D_GYRO_DEV_NAME },
+ { LSM330D_GYRO_DEV_NAME },
+ { LSM330DL_GYRO_DEV_NAME },
+ { LSM330DLC_GYRO_DEV_NAME },
+ { L3GD20_GYRO_DEV_NAME },
+ { L3GD20H_GYRO_DEV_NAME },
+ { L3G4IS_GYRO_DEV_NAME },
+ { LSM330_GYRO_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_gyro_id_table);
+
+static struct spi_driver st_gyro_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-gyro-spi",
+ },
+ .probe = st_gyro_spi_probe,
+ .remove = st_gyro_spi_remove,
+ .id_table = st_gyro_id_table,
+};
+module_spi_driver(st_gyro_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes spi driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-17 08:51:25 +0000