1 files changed, 377 insertions, 128 deletions

diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index bf5ef077e79..b13936dacc7 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -64,10 +64,10 @@
 #define AK8975_REG_CNTL			0x0A
 #define AK8975_REG_CNTL_MODE_SHIFT	0
 #define AK8975_REG_CNTL_MODE_MASK	(0xF << AK8975_REG_CNTL_MODE_SHIFT)
-#define AK8975_REG_CNTL_MODE_POWER_DOWN	0
-#define AK8975_REG_CNTL_MODE_ONCE	1
-#define AK8975_REG_CNTL_MODE_SELF_TEST	8
-#define AK8975_REG_CNTL_MODE_FUSE_ROM	0xF
+#define AK8975_REG_CNTL_MODE_POWER_DOWN	0x00
+#define AK8975_REG_CNTL_MODE_ONCE	0x01
+#define AK8975_REG_CNTL_MODE_SELF_TEST	0x08
+#define AK8975_REG_CNTL_MODE_FUSE_ROM	0x0F
 
 #define AK8975_REG_RSVC			0x0B
 #define AK8975_REG_ASTC			0x0C
@@ -81,18 +81,278 @@
 #define AK8975_MAX_REGS			AK8975_REG_ASAZ
 
 /*
+ * AK09912 Register definitions
+ */
+#define AK09912_REG_WIA1		0x00
+#define AK09912_REG_WIA2		0x01
+#define AK09912_DEVICE_ID		0x04
+#define AK09911_DEVICE_ID		0x05
+
+#define AK09911_REG_INFO1		0x02
+#define AK09911_REG_INFO2		0x03
+
+#define AK09912_REG_ST1			0x10
+
+#define AK09912_REG_ST1_DRDY_SHIFT	0
+#define AK09912_REG_ST1_DRDY_MASK	(1 << AK09912_REG_ST1_DRDY_SHIFT)
+
+#define AK09912_REG_HXL			0x11
+#define AK09912_REG_HXH			0x12
+#define AK09912_REG_HYL			0x13
+#define AK09912_REG_HYH			0x14
+#define AK09912_REG_HZL			0x15
+#define AK09912_REG_HZH			0x16
+#define AK09912_REG_TMPS		0x17
+
+#define AK09912_REG_ST2			0x18
+#define AK09912_REG_ST2_HOFL_SHIFT	3
+#define AK09912_REG_ST2_HOFL_MASK	(1 << AK09912_REG_ST2_HOFL_SHIFT)
+
+#define AK09912_REG_CNTL1		0x30
+
+#define AK09912_REG_CNTL2		0x31
+#define AK09912_REG_CNTL_MODE_POWER_DOWN	0x00
+#define AK09912_REG_CNTL_MODE_ONCE	0x01
+#define AK09912_REG_CNTL_MODE_SELF_TEST	0x10
+#define AK09912_REG_CNTL_MODE_FUSE_ROM	0x1F
+#define AK09912_REG_CNTL2_MODE_SHIFT	0
+#define AK09912_REG_CNTL2_MODE_MASK	(0x1F << AK09912_REG_CNTL2_MODE_SHIFT)
+
+#define AK09912_REG_CNTL3		0x32
+
+#define AK09912_REG_TS1			0x33
+#define AK09912_REG_TS2			0x34
+#define AK09912_REG_TS3			0x35
+#define AK09912_REG_I2CDIS		0x36
+#define AK09912_REG_TS4			0x37
+
+#define AK09912_REG_ASAX		0x60
+#define AK09912_REG_ASAY		0x61
+#define AK09912_REG_ASAZ		0x62
+
+#define AK09912_MAX_REGS		AK09912_REG_ASAZ
+
+/*
  * Miscellaneous values.
  */
 #define AK8975_MAX_CONVERSION_TIMEOUT	500
 #define AK8975_CONVERSION_DONE_POLL_TIME 10
 #define AK8975_DATA_READY_TIMEOUT	((100*HZ)/1000)
-#define RAW_TO_GAUSS_8975(asa) ((((asa) + 128) * 3000) / 256)
-#define RAW_TO_GAUSS_8963(asa) ((((asa) + 128) * 6000) / 256)
+
+/*
+ * Precalculate scale factor (in Gauss units) for each axis and
+ * store in the device data.
+ *
+ * This scale factor is axis-dependent, and is derived from 3 calibration
+ * factors ASA(x), ASA(y), and ASA(z).
+ *
+ * These ASA values are read from the sensor device at start of day, and
+ * cached in the device context struct.
+ *
+ * Adjusting the flux value with the sensitivity adjustment value should be
+ * done via the following formula:
+ *
+ * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
+ * where H is the raw value, ASA is the sensitivity adjustment, and Hadj
+ * is the resultant adjusted value.
+ *
+ * We reduce the formula to:
+ *
+ * Hadj = H * (ASA + 128) / 256
+ *
+ * H is in the range of -4096 to 4095.  The magnetometer has a range of
+ * +-1229uT.  To go from the raw value to uT is:
+ *
+ * HuT = H * 1229/4096, or roughly, 3/10.
+ *
+ * Since 1uT = 0.01 gauss, our final scale factor becomes:
+ *
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
+ *
+ * Since ASA doesn't change, we cache the resultant scale factor into the
+ * device context in ak8975_setup().
+ *
+ * Given we use IIO_VAL_INT_PLUS_MICRO bit when displaying the scale, we
+ * multiply the stored scale value by 1e6.
+ */
+static long ak8975_raw_to_gauss(u16 data)
+{
+	return (((long)data + 128) * 3000) / 256;
+}
+
+/*
+ * For AK8963 and AK09911, same calculation, but the device is less sensitive:
+ *
+ * H is in the range of +-8190.  The magnetometer has a range of
+ * +-4912uT.  To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10.
+ */
+
+static long ak8963_09911_raw_to_gauss(u16 data)
+{
+	return (((long)data + 128) * 6000) / 256;
+}
+
+/*
+ * For AK09912, same calculation, except the device is more sensitive:
+ *
+ * H is in the range of -32752 to 32752.  The magnetometer has a range of
+ * +-4912uT.  To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10.
+ */
+static long ak09912_raw_to_gauss(u16 data)
+{
+	return (((long)data + 128) * 1500) / 256;
+}
 
 /* Compatible Asahi Kasei Compass parts */
 enum asahi_compass_chipset {
 	AK8975,
 	AK8963,
+	AK09911,
+	AK09912,
+	AK_MAX_TYPE
+};
+
+enum ak_ctrl_reg_addr {
+	ST1,
+	ST2,
+	CNTL,
+	ASA_BASE,
+	MAX_REGS,
+	REGS_END,
+};
+
+enum ak_ctrl_reg_mask {
+	ST1_DRDY,
+	ST2_HOFL,
+	ST2_DERR,
+	CNTL_MODE,
+	MASK_END,
+};
+
+enum ak_ctrl_mode {
+	POWER_DOWN,
+	MODE_ONCE,
+	SELF_TEST,
+	FUSE_ROM,
+	MODE_END,
+};
+
+struct ak_def {
+	enum asahi_compass_chipset type;
+	long (*raw_to_gauss)(u16 data);
+	u16 range;
+	u8 ctrl_regs[REGS_END];
+	u8 ctrl_masks[MASK_END];
+	u8 ctrl_modes[MODE_END];
+	u8 data_regs[3];
+};
+
+static struct ak_def ak_def_array[AK_MAX_TYPE] = {
+	{
+		.type = AK8975,
+		.raw_to_gauss = ak8975_raw_to_gauss,
+		.range = 4096,
+		.ctrl_regs = {
+			AK8975_REG_ST1,
+			AK8975_REG_ST2,
+			AK8975_REG_CNTL,
+			AK8975_REG_ASAX,
+			AK8975_MAX_REGS},
+		.ctrl_masks = {
+			AK8975_REG_ST1_DRDY_MASK,
+			AK8975_REG_ST2_HOFL_MASK,
+			AK8975_REG_ST2_DERR_MASK,
+			AK8975_REG_CNTL_MODE_MASK},
+		.ctrl_modes = {
+			AK8975_REG_CNTL_MODE_POWER_DOWN,
+			AK8975_REG_CNTL_MODE_ONCE,
+			AK8975_REG_CNTL_MODE_SELF_TEST,
+			AK8975_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK8975_REG_HXL,
+			AK8975_REG_HYL,
+			AK8975_REG_HZL},
+	},
+	{
+		.type = AK8963,
+		.raw_to_gauss = ak8963_09911_raw_to_gauss,
+		.range = 8190,
+		.ctrl_regs = {
+			AK8975_REG_ST1,
+			AK8975_REG_ST2,
+			AK8975_REG_CNTL,
+			AK8975_REG_ASAX,
+			AK8975_MAX_REGS},
+		.ctrl_masks = {
+			AK8975_REG_ST1_DRDY_MASK,
+			AK8975_REG_ST2_HOFL_MASK,
+			0,
+			AK8975_REG_CNTL_MODE_MASK},
+		.ctrl_modes = {
+			AK8975_REG_CNTL_MODE_POWER_DOWN,
+			AK8975_REG_CNTL_MODE_ONCE,
+			AK8975_REG_CNTL_MODE_SELF_TEST,
+			AK8975_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK8975_REG_HXL,
+			AK8975_REG_HYL,
+			AK8975_REG_HZL},
+	},
+	{
+		.type = AK09911,
+		.raw_to_gauss = ak8963_09911_raw_to_gauss,
+		.range = 8192,
+		.ctrl_regs = {
+			AK09912_REG_ST1,
+			AK09912_REG_ST2,
+			AK09912_REG_CNTL2,
+			AK09912_REG_ASAX,
+			AK09912_MAX_REGS},
+		.ctrl_masks = {
+			AK09912_REG_ST1_DRDY_MASK,
+			AK09912_REG_ST2_HOFL_MASK,
+			0,
+			AK09912_REG_CNTL2_MODE_MASK},
+		.ctrl_modes = {
+			AK09912_REG_CNTL_MODE_POWER_DOWN,
+			AK09912_REG_CNTL_MODE_ONCE,
+			AK09912_REG_CNTL_MODE_SELF_TEST,
+			AK09912_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK09912_REG_HXL,
+			AK09912_REG_HYL,
+			AK09912_REG_HZL},
+	},
+	{
+		.type = AK09912,
+		.raw_to_gauss = ak09912_raw_to_gauss,
+		.range = 32752,
+		.ctrl_regs = {
+			AK09912_REG_ST1,
+			AK09912_REG_ST2,
+			AK09912_REG_CNTL2,
+			AK09912_REG_ASAX,
+			AK09912_MAX_REGS},
+		.ctrl_masks = {
+			AK09912_REG_ST1_DRDY_MASK,
+			AK09912_REG_ST2_HOFL_MASK,
+			0,
+			AK09912_REG_CNTL2_MODE_MASK},
+		.ctrl_modes = {
+			AK09912_REG_CNTL_MODE_POWER_DOWN,
+			AK09912_REG_CNTL_MODE_ONCE,
+			AK09912_REG_CNTL_MODE_SELF_TEST,
+			AK09912_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK09912_REG_HXL,
+			AK09912_REG_HYL,
+			AK09912_REG_HZL},
+	}
 };
 
 /*
@@ -100,40 +360,82 @@ enum asahi_compass_chipset {
  */
 struct ak8975_data {
 	struct i2c_client	*client;
+	struct ak_def		*def;
 	struct attribute_group	attrs;
 	struct mutex		lock;
 	u8			asa[3];
 	long			raw_to_gauss[3];
-	u8			reg_cache[AK8975_MAX_REGS];
 	int			eoc_gpio;
 	int			eoc_irq;
 	wait_queue_head_t	data_ready_queue;
 	unsigned long		flags;
-	enum asahi_compass_chipset chipset;
+	u8			cntl_cache;
 };
 
-static const int ak8975_index_to_reg[] = {
-	AK8975_REG_HXL, AK8975_REG_HYL, AK8975_REG_HZL,
-};
+/*
+ * Return 0 if the i2c device is the one we expect.
+ * return a negative error number otherwise
+ */
+static int ak8975_who_i_am(struct i2c_client *client,
+			   enum asahi_compass_chipset type)
+{
+	u8 wia_val[2];
+	int ret;
+
+	/*
+	 * Signature for each device:
+	 * Device   |  WIA1      |  WIA2
+	 * AK09912  |  DEVICE_ID |  AK09912_DEVICE_ID
+	 * AK09911  |  DEVICE_ID |  AK09911_DEVICE_ID
+	 * AK8975   |  DEVICE_ID |  NA
+	 * AK8963   |  DEVICE_ID |  NA
+	 */
+	ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1,
+					    2, wia_val);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading WIA\n");
+		return ret;
+	}
+
+	if (wia_val[0] != AK8975_DEVICE_ID)
+		return -ENODEV;
+
+	switch (type) {
+	case AK8975:
+	case AK8963:
+		return 0;
+	case AK09911:
+		if (wia_val[1] == AK09911_DEVICE_ID)
+			return 0;
+		break;
+	case AK09912:
+		if (wia_val[1] == AK09912_DEVICE_ID)
+			return 0;
+		break;
+	default:
+		dev_err(&client->dev, "Type %d unknown\n", type);
+	}
+	return -ENODEV;
+}
 
 /*
- * Helper function to write to the I2C device's registers.
+ * Helper function to write to CNTL register.
  */
-static int ak8975_write_data(struct i2c_client *client,
-			     u8 reg, u8 val, u8 mask, u8 shift)
+static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ak8975_data *data = iio_priv(indio_dev);
 	u8 regval;
 	int ret;
 
-	regval = (data->reg_cache[reg] & ~mask) | (val << shift);
-	ret = i2c_smbus_write_byte_data(client, reg, regval);
+	regval = (data->cntl_cache & ~data->def->ctrl_masks[CNTL_MODE]) |
+		 data->def->ctrl_modes[mode];
+	ret = i2c_smbus_write_byte_data(data->client,
+					data->def->ctrl_regs[CNTL], regval);
 	if (ret < 0) {
-		dev_err(&client->dev, "Write to device fails status %x\n", ret);
 		return ret;
 	}
-	data->reg_cache[reg] = regval;
+	data->cntl_cache = regval;
+	/* After mode change wait atleast 100us */
+	usleep_range(100, 500);
 
 	return 0;
 }
@@ -166,8 +468,8 @@ static int ak8975_setup_irq(struct ak8975_data *data)
 		irq = gpio_to_irq(data->eoc_gpio);
 
 	rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler,
-			 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-			 dev_name(&client->dev), data);
+			      IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			      dev_name(&client->dev), data);
 	if (rc < 0) {
 		dev_err(&client->dev,
 			"irq %d request failed, (gpio %d): %d\n",
@@ -191,34 +493,18 @@ static int ak8975_setup(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ak8975_data *data = iio_priv(indio_dev);
-	u8 device_id;
 	int ret;
 
-	/* Confirm that the device we're talking to is really an AK8975. */
-	ret = i2c_smbus_read_byte_data(client, AK8975_REG_WIA);
-	if (ret < 0) {
-		dev_err(&client->dev, "Error reading WIA\n");
-		return ret;
-	}
-	device_id = ret;
-	if (device_id != AK8975_DEVICE_ID) {
-		dev_err(&client->dev, "Device ak8975 not found\n");
-		return -ENODEV;
-	}
-
 	/* Write the fused rom access mode. */
-	ret = ak8975_write_data(client,
-				AK8975_REG_CNTL,
-				AK8975_REG_CNTL_MODE_FUSE_ROM,
-				AK8975_REG_CNTL_MODE_MASK,
-				AK8975_REG_CNTL_MODE_SHIFT);
+	ret = ak8975_set_mode(data, FUSE_ROM);
 	if (ret < 0) {
 		dev_err(&client->dev, "Error in setting fuse access mode\n");
 		return ret;
 	}
 
 	/* Get asa data and store in the device data. */
-	ret = i2c_smbus_read_i2c_block_data(client, AK8975_REG_ASAX,
+	ret = i2c_smbus_read_i2c_block_data(client,
+					    data->def->ctrl_regs[ASA_BASE],
 					    3, data->asa);
 	if (ret < 0) {
 		dev_err(&client->dev, "Not able to read asa data\n");
@@ -226,13 +512,13 @@ static int ak8975_setup(struct i2c_client *client)
 	}
 
 	/* After reading fuse ROM data set power-down mode */
-	ret = ak8975_write_data(client,
-				AK8975_REG_CNTL,
-				AK8975_REG_CNTL_MODE_POWER_DOWN,
-				AK8975_REG_CNTL_MODE_MASK,
-				AK8975_REG_CNTL_MODE_SHIFT);
+	ret = ak8975_set_mode(data, POWER_DOWN);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error in setting power-down mode\n");
+		return ret;
+	}
 
-	if (data->eoc_gpio > 0 || client->irq) {
+	if (data->eoc_gpio > 0 || client->irq > 0) {
 		ret = ak8975_setup_irq(data);
 		if (ret < 0) {
 			dev_err(&client->dev,
@@ -241,61 +527,9 @@ static int ak8975_setup(struct i2c_client *client)
 		}
 	}
 
-	if (ret < 0) {
-		dev_err(&client->dev, "Error in setting power-down mode\n");
-		return ret;
-	}
-
-/*
- * Precalculate scale factor (in Gauss units) for each axis and
- * store in the device data.
- *
- * This scale factor is axis-dependent, and is derived from 3 calibration
- * factors ASA(x), ASA(y), and ASA(z).
- *
- * These ASA values are read from the sensor device at start of day, and
- * cached in the device context struct.
- *
- * Adjusting the flux value with the sensitivity adjustment value should be
- * done via the following formula:
- *
- * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
- *
- * where H is the raw value, ASA is the sensitivity adjustment, and Hadj
- * is the resultant adjusted value.
- *
- * We reduce the formula to:
- *
- * Hadj = H * (ASA + 128) / 256
- *
- * H is in the range of -4096 to 4095.  The magnetometer has a range of
- * +-1229uT.  To go from the raw value to uT is:
- *
- * HuT = H * 1229/4096, or roughly, 3/10.
- *
- * Since 1uT = 0.01 gauss, our final scale factor becomes:
- *
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
- * Hadj = H * ((ASA + 128) * 0.003) / 256
- *
- * Since ASA doesn't change, we cache the resultant scale factor into the
- * device context in ak8975_setup().
- */
-	if (data->chipset == AK8963) {
-		/*
-		 * H range is +-8190 and magnetometer range is +-4912.
-		 * So HuT using the above explanation for 8975,
-		 * 4912/8190 = ~ 6/10.
-		 * So the Hadj should use 6/10 instead of 3/10.
-		 */
-		data->raw_to_gauss[0] = RAW_TO_GAUSS_8963(data->asa[0]);
-		data->raw_to_gauss[1] = RAW_TO_GAUSS_8963(data->asa[1]);
-		data->raw_to_gauss[2] = RAW_TO_GAUSS_8963(data->asa[2]);
-	} else {
-		data->raw_to_gauss[0] = RAW_TO_GAUSS_8975(data->asa[0]);
-		data->raw_to_gauss[1] = RAW_TO_GAUSS_8975(data->asa[1]);
-		data->raw_to_gauss[2] = RAW_TO_GAUSS_8975(data->asa[2]);
-	}
+	data->raw_to_gauss[0] = data->def->raw_to_gauss(data->asa[0]);
+	data->raw_to_gauss[1] = data->def->raw_to_gauss(data->asa[1]);
+	data->raw_to_gauss[2] = data->def->raw_to_gauss(data->asa[2]);
 
 	return 0;
 }
@@ -318,7 +552,7 @@ static int wait_conversion_complete_gpio(struct ak8975_data *data)
 		return -EINVAL;
 	}
 
-	ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+	ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST1]);
 	if (ret < 0)
 		dev_err(&client->dev, "Error in reading ST1\n");
 
@@ -335,7 +569,8 @@ static int wait_conversion_complete_polled(struct ak8975_data *data)
 	/* Wait for the conversion to complete. */
 	while (timeout_ms) {
 		msleep(AK8975_CONVERSION_DONE_POLL_TIME);
-		ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+		ret = i2c_smbus_read_byte_data(client,
+					       data->def->ctrl_regs[ST1]);
 		if (ret < 0) {
 			dev_err(&client->dev, "Error in reading ST1\n");
 			return ret;
@@ -378,11 +613,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	mutex_lock(&data->lock);
 
 	/* Set up the device for taking a sample. */
-	ret = ak8975_write_data(client,
-				AK8975_REG_CNTL,
-				AK8975_REG_CNTL_MODE_ONCE,
-				AK8975_REG_CNTL_MODE_MASK,
-				AK8975_REG_CNTL_MODE_SHIFT);
+	ret = ak8975_set_mode(data, MODE_ONCE);
 	if (ret < 0) {
 		dev_err(&client->dev, "Error in setting operating mode\n");
 		goto exit;
@@ -399,14 +630,15 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 		goto exit;
 
 	/* This will be executed only for non-interrupt based waiting case */
-	if (ret & AK8975_REG_ST1_DRDY_MASK) {
-		ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST2);
+	if (ret & data->def->ctrl_masks[ST1_DRDY]) {
+		ret = i2c_smbus_read_byte_data(client,
+					       data->def->ctrl_regs[ST2]);
 		if (ret < 0) {
 			dev_err(&client->dev, "Error in reading ST2\n");
 			goto exit;
 		}
-		if (ret & (AK8975_REG_ST2_DERR_MASK |
-			   AK8975_REG_ST2_HOFL_MASK)) {
+		if (ret & (data->def->ctrl_masks[ST2_DERR] |
+			   data->def->ctrl_masks[ST2_HOFL])) {
 			dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
 			ret = -EINVAL;
 			goto exit;
@@ -415,7 +647,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 
 	/* Read the flux value from the appropriate register
 	   (the register is specified in the iio device attributes). */
-	ret = i2c_smbus_read_word_data(client, ak8975_index_to_reg[index]);
+	ret = i2c_smbus_read_word_data(client, data->def->data_regs[index]);
 	if (ret < 0) {
 		dev_err(&client->dev, "Read axis data fails\n");
 		goto exit;
@@ -424,7 +656,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	mutex_unlock(&data->lock);
 
 	/* Clamp to valid range. */
-	*val = clamp_t(s16, ret, -4096, 4095);
+	*val = clamp_t(s16, ret, -data->def->range, data->def->range);
 	return IIO_VAL_INT;
 
 exit:
@@ -473,6 +705,8 @@ static const struct acpi_device_id ak_acpi_match[] = {
 	{"AK8975", AK8975},
 	{"AK8963", AK8963},
 	{"INVN6500", AK8963},
+	{"AK09911", AK09911},
+	{"AK09912", AK09912},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
@@ -498,6 +732,7 @@ static int ak8975_probe(struct i2c_client *client,
 	int eoc_gpio;
 	int err;
 	const char *name = NULL;
+	enum asahi_compass_chipset chipset;
 
 	/* Grab and set up the supplied GPIO. */
 	if (client->dev.platform_data)
@@ -537,42 +772,50 @@ static int ak8975_probe(struct i2c_client *client,
 
 	/* id will be NULL when enumerated via ACPI */
 	if (id) {
-		data->chipset =
-			(enum asahi_compass_chipset)(id->driver_data);
+		chipset = (enum asahi_compass_chipset)(id->driver_data);
 		name = id->name;
 	} else if (ACPI_HANDLE(&client->dev))
-		name = ak8975_match_acpi_device(&client->dev, &data->chipset);
+		name = ak8975_match_acpi_device(&client->dev, &chipset);
 	else
 		return -ENOSYS;
 
+	if (chipset >= AK_MAX_TYPE) {
+		dev_err(&client->dev, "AKM device type unsupported: %d\n",
+			chipset);
+		return -ENODEV;
+	}
+
+	data->def = &ak_def_array[chipset];
+	err = ak8975_who_i_am(client, data->def->type);
+	if (err < 0) {
+		dev_err(&client->dev, "Unexpected device\n");
+		return err;
+	}
 	dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
 
 	/* Perform some basic start-of-day setup of the device. */
 	err = ak8975_setup(client);
 	if (err < 0) {
-		dev_err(&client->dev, "AK8975 initialization fails\n");
+		dev_err(&client->dev, "%s initialization fails\n", name);
 		return err;
 	}
 
-	data->client = client;
 	mutex_init(&data->lock);
-	data->eoc_gpio = eoc_gpio;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->channels = ak8975_channels;
 	indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
 	indio_dev->info = &ak8975_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->name = name;
-	err = devm_iio_device_register(&client->dev, indio_dev);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id ak8975_id[] = {
 	{"ak8975", AK8975},
 	{"ak8963", AK8963},
+	{"AK8963", AK8963},
+	{"ak09911", AK09911},
+	{"ak09912", AK09912},
 	{}
 };
 
@@ -581,14 +824,20 @@ MODULE_DEVICE_TABLE(i2c, ak8975_id);
 static const struct of_device_id ak8975_of_match[] = {
 	{ .compatible = "asahi-kasei,ak8975", },
 	{ .compatible = "ak8975", },
-	{ }
+	{ .compatible = "asahi-kasei,ak8963", },
+	{ .compatible = "ak8963", },
+	{ .compatible = "asahi-kasei,ak09911", },
+	{ .compatible = "ak09911", },
+	{ .compatible = "asahi-kasei,ak09912", },
+	{ .compatible = "ak09912", },
+	{}
 };
 MODULE_DEVICE_TABLE(of, ak8975_of_match);
 
 static struct i2c_driver ak8975_driver = {
 	.driver = {
 		.name	= "ak8975",
-		.of_match_table = ak8975_of_match,
+		.of_match_table = of_match_ptr(ak8975_of_match),
 		.acpi_match_table = ACPI_PTR(ak_acpi_match),
 	},
 	.probe		= ak8975_probe,