diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/ti_am335x_adc.c | 68 |
1 files changed, 49 insertions, 19 deletions
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index d4d748214e4..31e786e3999 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -60,6 +60,24 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev) return step_en; } +static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev, + struct iio_chan_spec const *chan) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) { + if (chan->channel == adc_dev->channel_line[i]) { + u32 step; + + step = adc_dev->channel_step[i]; + /* +1 for the charger */ + return 1 << (step + 1); + } + } + WARN_ON(1); + return 0; +} + static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan) { return 1 << adc_dev->channel_step[chan]; @@ -181,7 +199,7 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev) enb |= (get_adc_step_bit(adc_dev, bit) << 1); adc_dev->buffer_en_ch_steps = enb; - am335x_tsc_se_set(adc_dev->mfd_tscadc, enb); + am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb); tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW); @@ -199,6 +217,7 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev) tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW)); am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps); + adc_dev->buffer_en_ch_steps = 0; /* Flush FIFO of leftover data in the time it takes to disable adc */ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); @@ -328,34 +347,43 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, unsigned int fifo1count, read, stepid; bool found = false; u32 step_en; - unsigned long timeout = jiffies + usecs_to_jiffies - (IDLE_TIMEOUT * adc_dev->channels); + unsigned long timeout; if (iio_buffer_enabled(indio_dev)) return -EBUSY; - step_en = get_adc_step_mask(adc_dev); - am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en); + step_en = get_adc_chan_step_mask(adc_dev, chan); + if (!step_en) + return -EINVAL; + + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + while (fifo1count--) + tiadc_readl(adc_dev, REG_FIFO1); + + am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en); - /* Wait for ADC sequencer to complete sampling */ - while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) { - if (time_after(jiffies, timeout)) + timeout = jiffies + usecs_to_jiffies + (IDLE_TIMEOUT * adc_dev->channels); + /* Wait for Fifo threshold interrupt */ + while (1) { + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + if (fifo1count) + break; + + if (time_after(jiffies, timeout)) { + am335x_tsc_se_adc_done(adc_dev->mfd_tscadc); return -EAGAIN; } + } map_val = chan->channel + TOTAL_CHANNELS; /* - * When the sub-system is first enabled, - * the sequencer will always start with the - * lowest step (1) and continue until step (16). - * For ex: If we have enabled 4 ADC channels and - * currently use only 1 out of them, the - * sequencer still configures all the 4 steps, - * leading to 3 unwanted data. - * Hence we need to flush out this data. + * We check the complete FIFO. We programmed just one entry but in case + * something went wrong we left empty handed (-EAGAIN previously) and + * then the value apeared somehow in the FIFO we would have two entries. + * Therefore we read every item and keep only the latest version of the + * requested channel. */ - - fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); for (i = 0; i < fifo1count; i++) { read = tiadc_readl(adc_dev, REG_FIFO1); stepid = read & FIFOREAD_CHNLID_MASK; @@ -367,6 +395,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, *val = (u16) read; } } + am335x_tsc_se_adc_done(adc_dev->mfd_tscadc); if (found == false) return -EBUSY; @@ -494,7 +523,8 @@ static int tiadc_resume(struct device *dev) tiadc_writel(adc_dev, REG_CTRL, restore); tiadc_step_config(indio_dev); - + am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, + adc_dev->buffer_en_ch_steps); return 0; } |