summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ipath/ipath_iba6120.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_iba6120.c')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6120.c163
1 files changed, 154 insertions, 9 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 57915fd718e..597192e912d 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -329,6 +329,9 @@ static const struct ipath_cregs ipath_pe_cregs = {
#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL
+#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf
+#define IBA6120_IBCS_LINKSTATE_SHIFT 4
+
/* kr_extstatus bits */
#define INFINIPATH_EXTS_FREQSEL 0x2
#define INFINIPATH_EXTS_SERDESSEL 0x4
@@ -936,12 +939,27 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd,
else
ipath_dev_err(dd, "Can't find PCI Express "
"capability!\n");
+
+ dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+ dd->ipath_link_speed_supported = IPATH_IB_SDR;
+ dd->ipath_link_width_enabled = IB_WIDTH_4X;
+ dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
+ /* these can't change for this chip, so set once */
+ dd->ipath_link_width_active = dd->ipath_link_width_enabled;
+ dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
return 0;
}
static void ipath_init_pe_variables(struct ipath_devdata *dd)
{
/*
+ * setup the register offsets, since they are different for each
+ * chip
+ */
+ dd->ipath_kregs = &ipath_pe_kregs;
+ dd->ipath_cregs = &ipath_pe_cregs;
+
+ /*
* bits for selecting i2c direction and values,
* used for I2C serial flash
*/
@@ -950,6 +968,37 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
dd->ipath_gpio_sda = IPATH_GPIO_SDA;
dd->ipath_gpio_scl = IPATH_GPIO_SCL;
+ /*
+ * Fill in data for field-values that change in newer chips.
+ * We dynamically specify only the mask for LINKTRAININGSTATE
+ * and only the shift for LINKSTATE, as they are the only ones
+ * that change. Also precalculate the 3 link states of interest
+ * and the combined mask.
+ */
+ dd->ibcs_ls_shift = IBA6120_IBCS_LINKSTATE_SHIFT;
+ dd->ibcs_lts_mask = IBA6120_IBCS_LINKTRAININGSTATE_MASK;
+ dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
+ dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
+ dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
+ dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
+ dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
+
+ /*
+ * Fill in data for ibcc field-values that change in newer chips.
+ * We dynamically specify only the mask for LINKINITCMD
+ * and only the shift for LINKCMD and MAXPKTLEN, as they are
+ * the only ones that change.
+ */
+ dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
+ dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
+ dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+
/* Fill in shifts for RcvCtrl. */
dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
@@ -1003,6 +1052,8 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
+ dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
+ dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
/*
* EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
@@ -1024,6 +1075,7 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET;
+ dd->delay_mult = 2; /* SDR, 4X, can't change */
}
/* setup the MSI stuff again after a reset. I'd like to just call
@@ -1329,6 +1381,9 @@ static int ipath_pe_early_init(struct ipath_devdata *dd)
*/
dd->ipath_rcvhdrentsize = 24;
dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
+ dd->ipath_rhf_offset = 0;
+ dd->ipath_egrtidbase = (u64 __iomem *)
+ ((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase);
/*
* To truly support a 4KB MTU (for usermode), we need to
@@ -1399,6 +1454,14 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd)
dd->ipath_irq = 0;
}
+
+static struct ipath_message_header *
+ipath_pe_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
+{
+ return (struct ipath_message_header *)
+ &rhf_addr[sizeof(u64) / sizeof(u32)];
+}
+
static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports)
{
dd->ipath_portcnt =
@@ -1534,6 +1597,88 @@ static int ipath_pe_txe_recover(struct ipath_devdata *dd)
return 1;
}
+/* no interrupt fallback for these chips */
+static int ipath_pe_nointr_fallback(struct ipath_devdata *dd)
+{
+ return 0;
+}
+
+
+/*
+ * reset the XGXS (between serdes and IBC). Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining. To do this right, we reset IBC
+ * as well.
+ */
+static void ipath_pe_xgxs_reset(struct ipath_devdata *dd)
+{
+ u64 val, prev_val;
+
+ prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val = prev_val | INFINIPATH_XGXS_RESET;
+ prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+}
+
+
+static int ipath_pe_get_ib_cfg(struct ipath_devdata *dd, int which)
+{
+ int ret;
+
+ switch (which) {
+ case IPATH_IB_CFG_LWID:
+ ret = dd->ipath_link_width_active;
+ break;
+ case IPATH_IB_CFG_SPD:
+ ret = dd->ipath_link_speed_active;
+ break;
+ case IPATH_IB_CFG_LWID_ENB:
+ ret = dd->ipath_link_width_enabled;
+ break;
+ case IPATH_IB_CFG_SPD_ENB:
+ ret = dd->ipath_link_speed_enabled;
+ break;
+ default:
+ ret = -ENOTSUPP;
+ break;
+ }
+ return ret;
+}
+
+
+/* we assume range checking is already done, if needed */
+static int ipath_pe_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
+{
+ int ret = 0;
+
+ if (which == IPATH_IB_CFG_LWID_ENB)
+ dd->ipath_link_width_enabled = val;
+ else if (which == IPATH_IB_CFG_SPD_ENB)
+ dd->ipath_link_speed_enabled = val;
+ else
+ ret = -ENOTSUPP;
+ return ret;
+}
+
+static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
+{
+}
+
+
+static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
+{
+ ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs),
+ ipath_ib_linktrstate(dd, ibcs));
+ return 0;
+}
+
+
/**
* ipath_init_iba6120_funcs - set up the chip-specific function pointers
* @dd: the infinipath device
@@ -1554,7 +1699,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes;
dd->ipath_f_clear_tids = ipath_pe_clear_tids;
/*
- * this may get changed after we read the chip revision,
+ * _f_put_tid may get changed after we read the chip revision,
* but we start with the safe version for all revs
*/
dd->ipath_f_put_tid = ipath_pe_put_tid;
@@ -1562,19 +1707,19 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
dd->ipath_f_setextled = ipath_setup_pe_setextled;
dd->ipath_f_get_base_info = ipath_pe_get_base_info;
dd->ipath_f_free_irq = ipath_pe_free_irq;
-
- /* initialize chip-specific variables */
dd->ipath_f_tidtemplate = ipath_pe_tidtemplate;
+ dd->ipath_f_intr_fallback = ipath_pe_nointr_fallback;
+ dd->ipath_f_xgxs_reset = ipath_pe_xgxs_reset;
+ dd->ipath_f_get_msgheader = ipath_pe_get_msgheader;
dd->ipath_f_config_ports = ipath_pe_config_ports;
dd->ipath_f_read_counters = ipath_pe_read_counters;
+ dd->ipath_f_get_ib_cfg = ipath_pe_get_ib_cfg;
+ dd->ipath_f_set_ib_cfg = ipath_pe_set_ib_cfg;
+ dd->ipath_f_config_jint = ipath_pe_config_jint;
+ dd->ipath_f_ib_updown = ipath_pe_ib_updown;
- /*
- * setup the register offsets, since they are different for each
- * chip
- */
- dd->ipath_kregs = &ipath_pe_kregs;
- dd->ipath_cregs = &ipath_pe_cregs;
+ /* initialize chip-specific variables */
ipath_init_pe_variables(dd);
}