summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib/qib_iba7322.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7322.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7322.c7645
1 files changed, 7645 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
new file mode 100644
index 00000000000..503992d9c5c
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -0,0 +1,7645 @@
+/*
+ * Copyright (c) 2008, 2009, 2010 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file contains all of the code that is specific to the
+ * InfiniPath 7322 chip
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_smi.h>
+
+#include "qib.h"
+#include "qib_7322_regs.h"
+#include "qib_qsfp.h"
+
+#include "qib_mad.h"
+
+static void qib_setup_7322_setextled(struct qib_pportdata *, u32);
+static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t);
+static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op);
+static irqreturn_t qib_7322intr(int irq, void *data);
+static irqreturn_t qib_7322bufavail(int irq, void *data);
+static irqreturn_t sdma_intr(int irq, void *data);
+static irqreturn_t sdma_idle_intr(int irq, void *data);
+static irqreturn_t sdma_progress_intr(int irq, void *data);
+static irqreturn_t sdma_cleanup_intr(int irq, void *data);
+static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32,
+ struct qib_ctxtdata *rcd);
+static u8 qib_7322_phys_portstate(u64);
+static u32 qib_7322_iblink_state(u64);
+static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd,
+ u16 linitcmd);
+static void force_h1(struct qib_pportdata *);
+static void adj_tx_serdes(struct qib_pportdata *);
+static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8);
+static void qib_7322_mini_pcs_reset(struct qib_pportdata *);
+
+static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32);
+static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned);
+
+#define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb))
+
+/* LE2 serdes values for different cases */
+#define LE2_DEFAULT 5
+#define LE2_5m 4
+#define LE2_QME 0
+
+/* Below is special-purpose, so only really works for the IB SerDes blocks. */
+#define IBSD(hw_pidx) (hw_pidx + 2)
+
+/* these are variables for documentation and experimentation purposes */
+static const unsigned rcv_int_timeout = 375;
+static const unsigned rcv_int_count = 16;
+static const unsigned sdma_idle_cnt = 64;
+
+/* Time to stop altering Rx Equalization parameters, after link up. */
+#define RXEQ_DISABLE_MSECS 2500
+
+/*
+ * Number of VLs we are configured to use (to allow for more
+ * credits per vl, etc.)
+ */
+ushort qib_num_cfg_vls = 2;
+module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO);
+MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)");
+
+static ushort qib_chase = 1;
+module_param_named(chase, qib_chase, ushort, S_IRUGO);
+MODULE_PARM_DESC(chase, "Enable state chase handling");
+
+static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */
+module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO);
+MODULE_PARM_DESC(long_attenuation, \
+ "attenuation cutoff (dB) for long copper cable setup");
+
+static ushort qib_singleport;
+module_param_named(singleport, qib_singleport, ushort, S_IRUGO);
+MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space");
+
+#define MAX_ATTEN_LEN 64 /* plenty for any real system */
+/* for read back, default index is ~5m copper cable */
+static char txselect_list[MAX_ATTEN_LEN] = "10";
+static struct kparam_string kp_txselect = {
+ .string = txselect_list,
+ .maxlen = MAX_ATTEN_LEN
+};
+static int setup_txselect(const char *, struct kernel_param *);
+module_param_call(txselect, setup_txselect, param_get_string,
+ &kp_txselect, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(txselect, \
+ "Tx serdes indices (for no QSFP or invalid QSFP data)");
+
+#define BOARD_QME7342 5
+#define BOARD_QMH7342 6
+#define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \
+ BOARD_QMH7342)
+#define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \
+ BOARD_QME7342)
+
+#define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64))
+
+#define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64)))
+
+#define MASK_ACROSS(lsb, msb) \
+ (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb))
+
+#define SYM_RMASK(regname, fldname) ((u64) \
+ QIB_7322_##regname##_##fldname##_RMASK)
+
+#define SYM_MASK(regname, fldname) ((u64) \
+ QIB_7322_##regname##_##fldname##_RMASK << \
+ QIB_7322_##regname##_##fldname##_LSB)
+
+#define SYM_FIELD(value, regname, fldname) ((u64) \
+ (((value) >> SYM_LSB(regname, fldname)) & \
+ SYM_RMASK(regname, fldname)))
+
+/* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */
+#define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \
+ (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits))
+
+#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
+#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
+#define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask)
+#define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask)
+#define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port)
+/* Below because most, but not all, fields of IntMask have that full suffix */
+#define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port)
+
+
+#define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB)
+
+/*
+ * the size bits give us 2^N, in KB units. 0 marks as invalid,
+ * and 7 is reserved. We currently use only 2KB and 4KB
+ */
+#define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB
+#define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */
+#define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */
+#define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
+
+#define SendIBSLIDAssignMask \
+ QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK
+#define SendIBSLMCMask \
+ QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK
+
+#define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn)
+#define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn)
+#define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn)
+#define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn)
+#define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN)
+#define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN)
+
+#define _QIB_GPIO_SDA_NUM 1
+#define _QIB_GPIO_SCL_NUM 0
+#define QIB_EEPROM_WEN_NUM 14
+#define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */
+
+/* HW counter clock is at 4nsec */
+#define QIB_7322_PSXMITWAIT_CHECK_RATE 4000
+
+/* full speed IB port 1 only */
+#define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR)
+#define PORT_SPD_CAP_SHIFT 3
+
+/* full speed featuremask, both ports */
+#define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT))
+
+/*
+ * This file contains almost all the chip-specific register information and
+ * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip.
+ */
+
+/* Use defines to tie machine-generated names to lower-case names */
+#define kr_contextcnt KREG_IDX(ContextCnt)
+#define kr_control KREG_IDX(Control)
+#define kr_counterregbase KREG_IDX(CntrRegBase)
+#define kr_errclear KREG_IDX(ErrClear)
+#define kr_errmask KREG_IDX(ErrMask)
+#define kr_errstatus KREG_IDX(ErrStatus)
+#define kr_extctrl KREG_IDX(EXTCtrl)
+#define kr_extstatus KREG_IDX(EXTStatus)
+#define kr_gpio_clear KREG_IDX(GPIOClear)
+#define kr_gpio_mask KREG_IDX(GPIOMask)
+#define kr_gpio_out KREG_IDX(GPIOOut)
+#define kr_gpio_status KREG_IDX(GPIOStatus)
+#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
+#define kr_debugportval KREG_IDX(DebugPortValueReg)
+#define kr_fmask KREG_IDX(feature_mask)
+#define kr_act_fmask KREG_IDX(active_feature_mask)
+#define kr_hwerrclear KREG_IDX(HwErrClear)
+#define kr_hwerrmask KREG_IDX(HwErrMask)
+#define kr_hwerrstatus KREG_IDX(HwErrStatus)
+#define kr_intclear KREG_IDX(IntClear)
+#define kr_intmask KREG_IDX(IntMask)
+#define kr_intredirect KREG_IDX(IntRedirect0)
+#define kr_intstatus KREG_IDX(IntStatus)
+#define kr_pagealign KREG_IDX(PageAlign)
+#define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0)
+#define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */
+#define kr_rcvegrbase KREG_IDX(RcvEgrBase)
+#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
+#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
+#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
+#define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
+#define kr_rcvtidbase KREG_IDX(RcvTIDBase)
+#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
+#define kr_revision KREG_IDX(Revision)
+#define kr_scratch KREG_IDX(Scratch)
+#define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */
+#define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */
+#define kr_sendctrl KREG_IDX(SendCtrl)
+#define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */
+#define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */
+#define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr)
+#define kr_sendpiobufbase KREG_IDX(SendBufBase)
+#define kr_sendpiobufcnt KREG_IDX(SendBufCnt)
+#define kr_sendpiosize KREG_IDX(SendBufSize)
+#define kr_sendregbase KREG_IDX(SendRegBase)
+#define kr_sendbufavail0 KREG_IDX(SendBufAvail0)
+#define kr_userregbase KREG_IDX(UserRegBase)
+#define kr_intgranted KREG_IDX(Int_Granted)
+#define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int)
+#define kr_intblocked KREG_IDX(IntBlocked)
+#define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG)
+
+/*
+ * per-port kernel registers. Access only with qib_read_kreg_port()
+ * or qib_write_kreg_port()
+ */
+#define krp_errclear KREG_IBPORT_IDX(ErrClear)
+#define krp_errmask KREG_IBPORT_IDX(ErrMask)
+#define krp_errstatus KREG_IBPORT_IDX(ErrStatus)
+#define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0)
+#define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit)
+#define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID)
+#define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig)
+#define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA)
+#define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB)
+#define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC)
+#define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA)
+#define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB)
+#define krp_txestatus KREG_IBPORT_IDX(TXEStatus)
+#define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0)
+#define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl)
+#define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey)
+#define krp_psinterval KREG_IBPORT_IDX(PSInterval)
+#define krp_psstart KREG_IBPORT_IDX(PSStart)
+#define krp_psstat KREG_IBPORT_IDX(PSStat)
+#define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP)
+#define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl)
+#define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt)
+#define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA)
+#define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0)
+#define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15)
+#define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl)
+#define krp_sendctrl KREG_IBPORT_IDX(SendCtrl)
+#define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase)
+#define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0)
+#define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1)
+#define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2)
+#define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0)
+#define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1)
+#define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2)
+#define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt)
+#define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead)
+#define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr)
+#define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt)
+#define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen)
+#define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld)
+#define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt)
+#define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus)
+#define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail)
+#define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom)
+#define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign)
+#define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask)
+#define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX)
+#define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD)
+#define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE)
+#define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl)
+
+/*
+ * Per-context kernel registers. Acess only with qib_read_kreg_ctxt()
+ * or qib_write_kreg_ctxt()
+ */
+#define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0)
+#define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
+
+/*
+ * TID Flow table, per context. Reduces
+ * number of hdrq updates to one per flow (or on errors).
+ * context 0 and 1 share same memory, but have distinct
+ * addresses. Since for now, we never use expected sends
+ * on kernel contexts, we don't worry about that (we initialize
+ * those entries for ctxt 0/1 on driver load twice, for example).
+ */
+#define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */
+#define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0))
+
+/* these are the error bits in the tid flows, and are W1C */
+#define TIDFLOW_ERRBITS ( \
+ (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \
+ SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \
+ (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \
+ SYM_LSB(RcvTIDFlowTable0, SeqMismatch)))
+
+/* Most (not all) Counters are per-IBport.
+ * Requires LBIntCnt is at offset 0 in the group
+ */
+#define CREG_IDX(regname) \
+((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64))
+
+#define crp_badformat CREG_IDX(RxVersionErrCnt)
+#define crp_err_rlen CREG_IDX(RxLenErrCnt)
+#define crp_erricrc CREG_IDX(RxICRCErrCnt)
+#define crp_errlink CREG_IDX(RxLinkMalformCnt)
+#define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt)
+#define crp_errpkey CREG_IDX(RxPKeyMismatchCnt)
+#define crp_errvcrc CREG_IDX(RxVCRCErrCnt)
+#define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt)
+#define crp_iblinkdown CREG_IDX(IBLinkDownedCnt)
+#define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
+#define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt)
+#define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
+#define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
+#define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt)
+#define crp_pktrcv CREG_IDX(RxDataPktCnt)
+#define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
+#define crp_pktsend CREG_IDX(TxDataPktCnt)
+#define crp_pktsendflow CREG_IDX(TxFlowPktCnt)
+#define crp_psrcvdatacount CREG_IDX(PSRcvDataCount)
+#define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount)
+#define crp_psxmitdatacount CREG_IDX(PSXmitDataCount)
+#define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount)
+#define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount)
+#define crp_rcvebp CREG_IDX(RxEBPCnt)
+#define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt)
+#define crp_rcvovfl CREG_IDX(RxBufOvflCnt)
+#define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt)
+#define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt)
+#define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt)
+#define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt)
+#define crp_rxvlerr CREG_IDX(RxVlErrCnt)
+#define crp_sendstall CREG_IDX(TxFlowStallCnt)
+#define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt)
+#define crp_txhdrerr CREG_IDX(TxHeadersErrCnt)
+#define crp_txlenerr CREG_IDX(TxLenErrCnt)
+#define crp_txlenerr CREG_IDX(TxLenErrCnt)
+#define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt)
+#define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt)
+#define crp_txunderrun CREG_IDX(TxUnderrunCnt)
+#define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
+#define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt)
+#define crp_wordrcv CREG_IDX(RxDwordCnt)
+#define crp_wordsend CREG_IDX(TxDwordCnt)
+#define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut)
+
+/* these are the (few) counters that are not port-specific */
+#define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \
+ QIB_7322_LBIntCnt_OFFS) / sizeof(u64))
+#define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt)
+#define cr_lbint CREG_DEVIDX(LBIntCnt)
+#define cr_lbstall CREG_DEVIDX(LBFlowStallCnt)
+#define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt)
+#define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt)
+#define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt)
+#define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt)
+
+/* no chip register for # of IB ports supported, so define */
+#define NUM_IB_PORTS 2
+
+/* 1 VL15 buffer per hardware IB port, no register for this, so define */
+#define NUM_VL15_BUFS NUM_IB_PORTS
+
+/*
+ * context 0 and 1 are special, and there is no chip register that
+ * defines this value, so we have to define it here.
+ * These are all allocated to either 0 or 1 for single port
+ * hardware configuration, otherwise each gets half
+ */
+#define KCTXT0_EGRCNT 2048
+
+/* values for vl and port fields in PBC, 7322-specific */
+#define PBC_PORT_SEL_LSB 26
+#define PBC_PORT_SEL_RMASK 1
+#define PBC_VL_NUM_LSB 27
+#define PBC_VL_NUM_RMASK 7
+#define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */
+#define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */
+
+static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
+ [IB_RATE_2_5_GBPS] = 16,
+ [IB_RATE_5_GBPS] = 8,
+ [IB_RATE_10_GBPS] = 4,
+ [IB_RATE_20_GBPS] = 2,
+ [IB_RATE_30_GBPS] = 2,
+ [IB_RATE_40_GBPS] = 1
+};
+
+#define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive)
+#define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive)
+
+/* link training states, from IBC */
+#define IB_7322_LT_STATE_DISABLED 0x00
+#define IB_7322_LT_STATE_LINKUP 0x01
+#define IB_7322_LT_STATE_POLLACTIVE 0x02
+#define IB_7322_LT_STATE_POLLQUIET 0x03
+#define IB_7322_LT_STATE_SLEEPDELAY 0x04
+#define IB_7322_LT_STATE_SLEEPQUIET 0x05
+#define IB_7322_LT_STATE_CFGDEBOUNCE 0x08
+#define IB_7322_LT_STATE_CFGRCVFCFG 0x09
+#define IB_7322_LT_STATE_CFGWAITRMT 0x0a
+#define IB_7322_LT_STATE_CFGIDLE 0x0b
+#define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c
+#define IB_7322_LT_STATE_TXREVLANES 0x0d
+#define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e
+#define IB_7322_LT_STATE_RECOVERIDLE 0x0f
+#define IB_7322_LT_STATE_CFGENH 0x10
+#define IB_7322_LT_STATE_CFGTEST 0x11
+
+/* link state machine states from IBC */
+#define IB_7322_L_STATE_DOWN 0x0
+#define IB_7322_L_STATE_INIT 0x1
+#define IB_7322_L_STATE_ARM 0x2
+#define IB_7322_L_STATE_ACTIVE 0x3
+#define IB_7322_L_STATE_ACT_DEFER 0x4
+
+static const u8 qib_7322_physportstate[0x20] = {
+ [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
+ [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
+ [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
+ [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
+ [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
+ [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
+ [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7322_LT_STATE_CFGRCVFCFG] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7322_LT_STATE_CFGWAITRMT] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE,
+ [IB_7322_LT_STATE_RECOVERRETRAIN] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [IB_7322_LT_STATE_RECOVERWAITRMT] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [IB_7322_LT_STATE_RECOVERIDLE] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
+ [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH,
+ [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
+};
+
+struct qib_chip_specific {
+ u64 __iomem *cregbase;
+ u64 *cntrs;
+ spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */
+ spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */
+ u64 main_int_mask; /* clear bits which have dedicated handlers */
+ u64 int_enable_mask; /* for per port interrupts in single port mode */
+ u64 errormask;
+ u64 hwerrmask;
+ u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */
+ u64 gpio_mask; /* shadow the gpio mask register */
+ u64 extctrl; /* shadow the gpio output enable, etc... */
+ u32 ncntrs;
+ u32 nportcntrs;
+ u32 cntrnamelen;
+ u32 portcntrnamelen;
+ u32 numctxts;
+ u32 rcvegrcnt;
+ u32 updthresh; /* current AvailUpdThld */
+ u32 updthresh_dflt; /* default AvailUpdThld */
+ u32 r1;
+ int irq;
+ u32 num_msix_entries;
+ u32 sdmabufcnt;
+ u32 lastbuf_for_pio;
+ u32 stay_in_freeze;
+ u32 recovery_ports_initted;
+ struct msix_entry *msix_entries;
+ void **msix_arg;
+ unsigned long *sendchkenable;
+ unsigned long *sendgrhchk;
+ unsigned long *sendibchk;
+ u32 rcvavail_timeout[18];
+ char emsgbuf[128]; /* for device error interrupt msg buffer */
+};
+
+/* Table of entries in "human readable" form Tx Emphasis. */
+struct txdds_ent {
+ u8 amp;
+ u8 pre;
+ u8 main;
+ u8 post;
+};
+
+struct vendor_txdds_ent {
+ u8 oui[QSFP_VOUI_LEN];
+ u8 *partnum;
+ struct txdds_ent sdr;
+ struct txdds_ent ddr;
+ struct txdds_ent qdr;
+};
+
+static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
+
+#define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
+#define TXDDS_EXTRA_SZ 11 /* number of extra tx settings entries */
+#define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
+
+#define H1_FORCE_VAL 8
+#define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */
+#define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */
+
+/* The static and dynamic registers are paired, and the pairs indexed by spd */
+#define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \
+ + ((spd) * 2))
+
+#define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */
+#define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */
+#define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */
+#define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */
+#define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */
+
+struct qib_chippport_specific {
+ u64 __iomem *kpregbase;
+ u64 __iomem *cpregbase;
+ u64 *portcntrs;
+ struct qib_pportdata *ppd;
+ wait_queue_head_t autoneg_wait;
+ struct delayed_work autoneg_work;
+ struct delayed_work ipg_work;
+ struct timer_list chase_timer;
+ /*
+ * these 5 fields are used to establish deltas for IB symbol
+ * errors and linkrecovery errors. They can be reported on
+ * some chips during link negotiation prior to INIT, and with
+ * DDR when faking DDR negotiations with non-IBTA switches.
+ * The chip counters are adjusted at driver unload if there is
+ * a non-zero delta.
+ */
+ u64 ibdeltainprog;
+ u64 ibsymdelta;
+ u64 ibsymsnap;
+ u64 iblnkerrdelta;
+ u64 iblnkerrsnap;
+ u64 iblnkdownsnap;
+ u64 iblnkdowndelta;
+ u64 ibmalfdelta;
+ u64 ibmalfsnap;
+ u64 ibcctrl_a; /* krp_ibcctrl_a shadow */
+ u64 ibcctrl_b; /* krp_ibcctrl_b shadow */
+ u64 qdr_dfe_time;
+ u64 chase_end;
+ u32 autoneg_tries;
+ u32 recovery_init;
+ u32 qdr_dfe_on;
+ u32 qdr_reforce;
+ /*
+ * Per-bay per-channel rcv QMH H1 values and Tx values for QDR.
+ * entry zero is unused, to simplify indexing
+ */
+ u8 h1_val;
+ u8 no_eep; /* txselect table index to use if no qsfp info */
+ u8 ipg_tries;
+ u8 ibmalfusesnap;
+ struct qib_qsfp_data qsfp_data;
+ char epmsgbuf[192]; /* for port error interrupt msg buffer */
+};
+
+static struct {
+ const char *name;
+ irq_handler_t handler;
+ int lsb;
+ int port; /* 0 if not port-specific, else port # */
+} irq_table[] = {
+ { QIB_DRV_NAME, qib_7322intr, -1, 0 },
+ { QIB_DRV_NAME " (buf avail)", qib_7322bufavail,
+ SYM_LSB(IntStatus, SendBufAvail), 0 },
+ { QIB_DRV_NAME " (sdma 0)", sdma_intr,
+ SYM_LSB(IntStatus, SDmaInt_0), 1 },
+ { QIB_DRV_NAME " (sdma 1)", sdma_intr,
+ SYM_LSB(IntStatus, SDmaInt_1), 2 },
+ { QIB_DRV_NAME " (sdmaI 0)", sdma_idle_intr,
+ SYM_LSB(IntStatus, SDmaIdleInt_0), 1 },
+ { QIB_DRV_NAME " (sdmaI 1)", sdma_idle_intr,
+ SYM_LSB(IntStatus, SDmaIdleInt_1), 2 },
+ { QIB_DRV_NAME " (sdmaP 0)", sdma_progress_intr,
+ SYM_LSB(IntStatus, SDmaProgressInt_0), 1 },
+ { QIB_DRV_NAME " (sdmaP 1)", sdma_progress_intr,
+ SYM_LSB(IntStatus, SDmaProgressInt_1), 2 },
+ { QIB_DRV_NAME " (sdmaC 0)", sdma_cleanup_intr,
+ SYM_LSB(IntStatus, SDmaCleanupDone_0), 1 },
+ { QIB_DRV_NAME " (sdmaC 1)", sdma_cleanup_intr,
+ SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 },
+};
+
+/* ibcctrl bits */
+#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
+/* cycle through TS1/TS2 till OK */
+#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
+#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
+
+#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
+#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
+#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
+
+#define BLOB_7322_IBCHG 0x101
+
+static inline void qib_write_kreg(const struct qib_devdata *dd,
+ const u32 regno, u64 value);
+static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32);
+static void write_7322_initregs(struct qib_devdata *);
+static void write_7322_init_portregs(struct qib_pportdata *);
+static void setup_7322_link_recovery(struct qib_pportdata *, u32);
+static void check_7322_rxe_status(struct qib_pportdata *);
+static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *);
+
+/**
+ * qib_read_ureg32 - read 32-bit virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @ctxt: context number
+ *
+ * Return the contents of a register that is virtualized to be per context.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
+ */
+static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
+ enum qib_ureg regno, int ctxt)
+{
+ if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+ return readl(regno + (u64 __iomem *)(
+ (dd->ureg_align * ctxt) + (dd->userbase ?
+ (char __iomem *)dd->userbase :
+ (char __iomem *)dd->kregbase + dd->uregbase)));
+}
+
+/**
+ * qib_read_ureg - read virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @ctxt: context number
+ *
+ * Return the contents of a register that is virtualized to be per context.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
+ */
+static inline u64 qib_read_ureg(const struct qib_devdata *dd,
+ enum qib_ureg regno, int ctxt)
+{
+
+ if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+ return readq(regno + (u64 __iomem *)(
+ (dd->ureg_align * ctxt) + (dd->userbase ?
+ (char __iomem *)dd->userbase :
+ (char __iomem *)dd->kregbase + dd->uregbase)));
+}
+
+/**
+ * qib_write_ureg - write virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @value: value
+ * @ctxt: context
+ *
+ * Write the contents of a register that is virtualized to be per context.
+ */
+static inline void qib_write_ureg(const struct qib_devdata *dd,
+ enum qib_ureg regno, u64 value, int ctxt)
+{
+ u64 __iomem *ubase;
+ if (dd->userbase)
+ ubase = (u64 __iomem *)
+ ((char __iomem *) dd->userbase +
+ dd->ureg_align * ctxt);
+ else
+ ubase = (u64 __iomem *)
+ (dd->uregbase +
+ (char __iomem *) dd->kregbase +
+ dd->ureg_align * ctxt);
+
+ if (dd->kregbase && (dd->flags & QIB_PRESENT))
+ writeq(value, &ubase[regno]);
+}
+
+static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
+ const u32 regno)
+{
+ if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+ return -1;
+ return readl((u32 __iomem *) &dd->kregbase[regno]);
+}
+
+static inline u64 qib_read_kreg64(const struct qib_devdata *dd,
+ const u32 regno)
+{
+ if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+ return -1;
+ return readq(&dd->kregbase[regno]);
+}
+
+static inline void qib_write_kreg(const struct qib_devdata *dd,
+ const u32 regno, u64 value)
+{
+ if (dd->kregbase && (dd->flags & QIB_PRESENT))
+ writeq(value, &dd->kregbase[regno]);
+}
+
+/*
+ * not many sanity checks for the port-specific kernel register routines,
+ * since they are only used when it's known to be safe.
+*/
+static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd,
+ const u16 regno)
+{
+ if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT))
+ return 0ULL;
+ return readq(&ppd->cpspec->kpregbase[regno]);
+}
+
+static inline void qib_write_kreg_port(const struct qib_pportdata *ppd,
+ const u16 regno, u64 value)
+{
+ if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase &&
+ (ppd->dd->flags & QIB_PRESENT))
+ writeq(value, &ppd->cpspec->kpregbase[regno]);
+}
+
+/**
+ * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
+ * @dd: the qlogic_ib device
+ * @regno: the register number to write
+ * @ctxt: the context containing the register
+ * @value: the value to write
+ */
+static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
+ const u16 regno, unsigned ctxt,
+ u64 value)
+{
+ qib_write_kreg(dd, regno + ctxt, value);
+}
+
+static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno)
+{
+ if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+ return readq(&dd->cspec->cregbase[regno]);
+
+
+}
+
+static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno)
+{
+ if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+ return readl(&dd->cspec->cregbase[regno]);
+
+
+}
+
+static inline void write_7322_creg_port(const struct qib_pportdata *ppd,
+ u16 regno, u64 value)
+{
+ if (ppd->cpspec && ppd->cpspec->cpregbase &&
+ (ppd->dd->flags & QIB_PRESENT))
+ writeq(value, &ppd->cpspec->cpregbase[regno]);
+}
+
+static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd,
+ u16 regno)
+{
+ if (!ppd->cpspec || !ppd->cpspec->cpregbase ||
+ !(ppd->dd->flags & QIB_PRESENT))
+ return 0;
+ return readq(&ppd->cpspec->cpregbase[regno]);
+}
+
+static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd,
+ u16 regno)
+{
+ if (!ppd->cpspec || !ppd->cpspec->cpregbase ||
+ !(ppd->dd->flags & QIB_PRESENT))
+ return 0;
+ return readl(&ppd->cpspec->cpregbase[regno]);
+}
+
+/* bits in Control register */
+#define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset)
+#define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn)
+
+/* bits in general interrupt regs */
+#define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask)
+#define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17)
+#define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB)
+#define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask)
+#define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17)
+#define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB)
+#define QIB_I_C_ERROR INT_MASK(Err)
+
+#define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1))
+#define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail)
+#define QIB_I_GPIO INT_MASK(AssertGPIO)
+#define QIB_I_P_SDMAINT(pidx) \
+ (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \
+ INT_MASK_P(SDmaProgress, pidx) | \
+ INT_MASK_PM(SDmaCleanupDone, pidx))
+
+/* Interrupt bits that are "per port" */
+#define QIB_I_P_BITSEXTANT(pidx) \
+ (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \
+ INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \
+ INT_MASK_P(SDmaProgress, pidx) | \
+ INT_MASK_PM(SDmaCleanupDone, pidx))
+
+/* Interrupt bits that are common to a device */
+/* currently unused: QIB_I_SPIOSENT */
+#define QIB_I_C_BITSEXTANT \
+ (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \
+ QIB_I_SPIOSENT | \
+ QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO)
+
+#define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \
+ QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1))
+
+/*
+ * Error bits that are "per port".
+ */
+#define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged)
+#define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr)
+#define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr)
+#define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr)
+#define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr)
+#define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr)
+#define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr)
+#define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr)
+#define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr)
+#define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr)
+#define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr)
+#define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr)
+#define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr)
+#define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr)
+#define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr)
+#define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr)
+#define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr)
+#define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr)
+#define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr)
+#define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr)
+#define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr)
+#define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr)
+#define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr)
+#define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr)
+#define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr)
+#define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr)
+#define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr)
+#define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr)
+
+#define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr)
+#define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr)
+#define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr)
+#define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr)
+#define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr)
+#define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr)
+#define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr)
+#define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr)
+#define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr)
+#define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr)
+#define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr)
+
+/* Error bits that are common to a device */
+#define QIB_E_RESET ERR_MASK(ResetNegated)
+#define QIB_E_HARDWARE ERR_MASK(HardwareErr)
+#define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr)
+
+
+/*
+ * Per chip (rather than per-port) errors. Most either do
+ * nothing but trigger a print (because they self-recover, or
+ * always occur in tandem with other errors that handle the
+ * issue), or because they indicate errors with no recovery,
+ * but we want to know that they happened.
+ */
+#define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr)
+#define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd)
+#define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr)
+#define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr)
+#define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr)
+#define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr)
+#define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr)
+#define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr)
+
+/* SDMA chip errors (not per port)
+ * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get
+ * the SDMAHALT error immediately, so we just print the dup error via the
+ * E_AUTO mechanism. This is true of most of the per-port fatal errors
+ * as well, but since this is port-independent, by definition, it's
+ * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per
+ * packet send errors, and so are handled in the same manner as other
+ * per-packet errors.
+ */
+#define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err)
+#define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr)
+#define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr)
+
+/*
+ * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS
+ * it is used to print "common" packet errors.
+ */
+#define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\
+ QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\
+ QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\
+ QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \
+ QIB_E_P_REBP)
+
+/* Error Bits that Packet-related (Receive, per-port) */
+#define QIB_E_P_RPKTERRS (\
+ QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \
+ QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \
+ QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\
+ QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \
+ QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \
+ QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP)
+
+/*
+ * Error bits that are Send-related (per port)
+ * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling).
+ * All of these potentially need to have a buffer disarmed
+ */
+#define QIB_E_P_SPKTERRS (\
+ QIB_E_P_SUNEXP_PKTNUM |\
+ QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\
+ QIB_E_P_SMAXPKTLEN |\
+ QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \
+ QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \
+ QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL)
+
+#define QIB_E_SPKTERRS ( \
+ QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \
+ ERR_MASK_N(SendUnsupportedVLErr) | \
+ QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT)
+
+#define QIB_E_P_SDMAERRS ( \
+ QIB_E_P_SDMAHALT | \
+ QIB_E_P_SDMADESCADDRMISALIGN | \
+ QIB_E_P_SDMAUNEXPDATA | \
+ QIB_E_P_SDMAMISSINGDW | \
+ QIB_E_P_SDMADWEN | \
+ QIB_E_P_SDMARPYTAG | \
+ QIB_E_P_SDMA1STDESC | \
+ QIB_E_P_SDMABASE | \
+ QIB_E_P_SDMATAILOUTOFBOUND | \
+ QIB_E_P_SDMAOUTOFBOUND | \
+ QIB_E_P_SDMAGENMISMATCH)
+
+/*
+ * This sets some bits more than once, but makes it more obvious which
+ * bits are not handled under other categories, and the repeat definition
+ * is not a problem.
+ */
+#define QIB_E_P_BITSEXTANT ( \
+ QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \
+ QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \
+ QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \
+ QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \
+ )
+
+/*
+ * These are errors that can occur when the link
+ * changes state while a packet is being sent or received. This doesn't
+ * cover things like EBP or VCRC that can be the result of a sending
+ * having the link change state, so we receive a "known bad" packet.
+ * All of these are "per port", so renamed:
+ */
+#define QIB_E_P_LINK_PKTERRS (\
+ QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\
+ QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\
+ QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\
+ QIB_E_P_RUNEXPCHAR)
+
+/*
+ * This sets some bits more than once, but makes it more obvious which
+ * bits are not handled under other categories (such as QIB_E_SPKTERRS),
+ * and the repeat definition is not a problem.
+ */
+#define QIB_E_C_BITSEXTANT (\
+ QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\
+ QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\
+ QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE)
+
+/* Likewise Neuter E_SPKT_ERRS_IGNORE */
+#define E_SPKT_ERRS_IGNORE 0
+
+#define QIB_EXTS_MEMBIST_DISABLED \
+ SYM_MASK(EXTStatus, MemBISTDisabled)
+#define QIB_EXTS_MEMBIST_ENDTEST \
+ SYM_MASK(EXTStatus, MemBISTEndTest)
+
+#define QIB_E_SPIOARMLAUNCH \
+ ERR_MASK(SendArmLaunchErr)
+
+#define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd)
+#define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd)
+
+/*
+ * IBTA_1_2 is set when multiple speeds are enabled (normal),
+ * and also if forced QDR (only QDR enabled). It's enabled for the
+ * forced QDR case so that scrambling will be enabled by the TS3
+ * exchange, when supported by both sides of the link.
+ */
+#define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE)
+#define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED)
+#define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)
+#define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR)
+#define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR)
+#define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \
+ SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR))
+#define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR)
+
+#define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod)
+#define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod)
+
+#define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS)
+#define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS))
+#define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS))
+
+#define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP)
+#define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP)
+#define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \
+ SYM_MASK(IBCCtrlB_0, HRTBT_ENB))
+#define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \
+ SYM_LSB(IBCCtrlB_0, HRTBT_ENB))
+#define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB)
+
+#define IBA7322_REDIRECT_VEC_PER_REG 12
+
+#define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En)
+#define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En)
+#define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En)
+#define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En)
+#define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En)
+
+#define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */
+
+#define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \
+ .msg = #fldname }
+#define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \
+ fldname##Mask##_##port), .msg = #fldname }
+static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = {
+ HWE_AUTO_P(IBSerdesPClkNotDetect, 1),
+ HWE_AUTO_P(IBSerdesPClkNotDetect, 0),
+ HWE_AUTO(PCIESerdesPClkNotDetect),
+ HWE_AUTO(PowerOnBISTFailed),
+ HWE_AUTO(TempsenseTholdReached),
+ HWE_AUTO(MemoryErr),
+ HWE_AUTO(PCIeBusParityErr),
+ HWE_AUTO(PcieCplTimeout),
+ HWE_AUTO(PciePoisonedTLP),
+ HWE_AUTO_P(SDmaMemReadErr, 1),
+ HWE_AUTO_P(SDmaMemReadErr, 0),
+ HWE_AUTO_P(IBCBusFromSPCParityErr, 1),
+ HWE_AUTO_P(IBCBusFromSPCParityErr, 0),
+ HWE_AUTO_P(statusValidNoEop, 1),
+ HWE_AUTO_P(statusValidNoEop, 0),
+ HWE_AUTO(LATriggered),
+ { .mask = 0 }
+};
+
+#define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \
+ .msg = #fldname }
+#define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \
+ .msg = #fldname }
+static const struct qib_hwerror_msgs qib_7322error_msgs[] = {
+ E_AUTO(ResetNegated),
+ E_AUTO(HardwareErr),
+ E_AUTO(InvalidAddrErr),
+ E_AUTO(SDmaVL15Err),
+ E_AUTO(SBufVL15MisUseErr),
+ E_AUTO(InvalidEEPCmd),
+ E_AUTO(RcvContextShareErr),
+ E_AUTO(SendVLMismatchErr),
+ E_AUTO(SendArmLaunchErr),
+ E_AUTO(SendSpecialTriggerErr),
+ E_AUTO(SDmaWrongPortErr),
+ E_AUTO(SDmaBufMaskDuplicateErr),
+ E_AUTO(RcvHdrFullErr),
+ E_AUTO(RcvEgrFullErr),
+ { .mask = 0 }
+};
+
+static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = {
+ E_P_AUTO(IBStatusChanged),
+ E_P_AUTO(SHeadersErr),
+ E_P_AUTO(VL15BufMisuseErr),
+ /*
+ * SDmaHaltErr is not really an error, make it clearer;
+ */
+ {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted"},
+ E_P_AUTO(SDmaDescAddrMisalignErr),
+ E_P_AUTO(SDmaUnexpDataErr),
+ E_P_AUTO(SDmaMissingDwErr),
+ E_P_AUTO(SDmaDwEnErr),
+ E_P_AUTO(SDmaRpyTagErr),
+ E_P_AUTO(SDma1stDescErr),
+ E_P_AUTO(SDmaBaseErr),
+ E_P_AUTO(SDmaTailOutOfBoundErr),
+ E_P_AUTO(SDmaOutOfBoundErr),
+ E_P_AUTO(SDmaGenMismatchErr),
+ E_P_AUTO(SendBufMisuseErr),
+ E_P_AUTO(SendUnsupportedVLErr),
+ E_P_AUTO(SendUnexpectedPktNumErr),
+ E_P_AUTO(SendDroppedDataPktErr),
+ E_P_AUTO(SendDroppedSmpPktErr),
+ E_P_AUTO(SendPktLenErr),
+ E_P_AUTO(SendUnderRunErr),
+ E_P_AUTO(SendMaxPktLenErr),
+ E_P_AUTO(SendMinPktLenErr),
+ E_P_AUTO(RcvIBLostLinkErr),
+ E_P_AUTO(RcvHdrErr),
+ E_P_AUTO(RcvHdrLenErr),
+ E_P_AUTO(RcvBadTidErr),
+ E_P_AUTO(RcvBadVersionErr),
+ E_P_AUTO(RcvIBFlowErr),
+ E_P_AUTO(RcvEBPErr),
+ E_P_AUTO(RcvUnsupportedVLErr),
+ E_P_AUTO(RcvUnexpectedCharErr),
+ E_P_AUTO(RcvShortPktLenErr),
+ E_P_AUTO(RcvLongPktLenErr),
+ E_P_AUTO(RcvMaxPktLenErr),
+ E_P_AUTO(RcvMinPktLenErr),
+ E_P_AUTO(RcvICRCErr),
+ E_P_AUTO(RcvVCRCErr),
+ E_P_AUTO(RcvFormatErr),
+ { .mask = 0 }
+};
+
+/*
+ * Below generates "auto-message" for interrupts not specific to any port or
+ * context
+ */
+#define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \
+ .msg = #fldname }
+/* Below generates "auto-message" for interrupts specific to a port */
+#define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\
+ SYM_LSB(IntMask, fldname##Mask##_0), \
+ SYM_LSB(IntMask, fldname##Mask##_1)), \
+ .msg = #fldname "_P" }
+/* For some reason, the SerDesTrimDone bits are reversed */
+#define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\
+ SYM_LSB(IntMask, fldname##Mask##_1), \
+ SYM_LSB(IntMask, fldname##Mask##_0)), \
+ .msg = #fldname "_P" }
+/*
+ * Below generates "auto-message" for interrupts specific to a context,
+ * with ctxt-number appended
+ */
+#define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\
+ SYM_LSB(IntMask, fldname##0IntMask), \
+ SYM_LSB(IntMask, fldname##17IntMask)), \
+ .msg = #fldname "_C"}
+
+static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = {
+ INTR_AUTO_P(SDmaInt),
+ INTR_AUTO_P(SDmaProgressInt),
+ INTR_AUTO_P(SDmaIdleInt),
+ INTR_AUTO_P(SDmaCleanupDone),
+ INTR_AUTO_C(RcvUrg),
+ INTR_AUTO_P(ErrInt),
+ INTR_AUTO(ErrInt), /* non-port-specific errs */
+ INTR_AUTO(AssertGPIOInt),
+ INTR_AUTO_P(SendDoneInt),
+ INTR_AUTO(SendBufAvailInt),
+ INTR_AUTO_C(RcvAvail),
+ { .mask = 0 }
+};
+
+#define TXSYMPTOM_AUTO_P(fldname) \
+ { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), .msg = #fldname }
+static const struct qib_hwerror_msgs hdrchk_msgs[] = {
+ TXSYMPTOM_AUTO_P(NonKeyPacket),
+ TXSYMPTOM_AUTO_P(GRHFail),
+ TXSYMPTOM_AUTO_P(PkeyFail),
+ TXSYMPTOM_AUTO_P(QPFail),
+ TXSYMPTOM_AUTO_P(SLIDFail),
+ TXSYMPTOM_AUTO_P(RawIPV6),
+ TXSYMPTOM_AUTO_P(PacketTooSmall),
+ { .mask = 0 }
+};
+
+#define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
+
+/*
+ * Called when we might have an error that is specific to a particular
+ * PIO buffer, and may need to cancel that buffer, so it can be re-used,
+ * because we don't need to force the update of pioavail
+ */
+static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u32 i;
+ int any;
+ u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
+ u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ unsigned long sbuf[4];
+
+ /*
+ * It's possible that sendbuffererror could have bits set; might
+ * have already done this as a result of hardware error handling.
+ */
+ any = 0;
+ for (i = 0; i < regcnt; ++i) {
+ sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i);
+ if (sbuf[i]) {
+ any = 1;
+ qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]);
+ }
+ }
+
+ if (any)
+ qib_disarm_piobufs_set(dd, sbuf, piobcnt);
+}
+
+/* No txe_recover yet, if ever */
+
+/* No decode__errors yet */
+static void err_decode(char *msg, size_t len, u64 errs,
+ const struct qib_hwerror_msgs *msp)
+{
+ u64 these, lmask;
+ int took, multi, n = 0;
+
+ while (msp && msp->mask) {
+ multi = (msp->mask & (msp->mask - 1));
+ while (errs & msp->mask) {
+ these = (errs & msp->mask);
+ lmask = (these & (these - 1)) ^ these;
+ if (len) {
+ if (n++) {
+ /* separate the strings */
+ *msg++ = ',';
+ len--;
+ }
+ took = scnprintf(msg, len, "%s", msp->msg);
+ len -= took;
+ msg += took;
+ }
+ errs &= ~lmask;
+ if (len && multi) {
+ /* More than one bit this mask */
+ int idx = -1;
+
+ while (lmask & msp->mask) {
+ ++idx;
+ lmask >>= 1;
+ }
+ took = scnprintf(msg, len, "_%d", idx);
+ len -= took;
+ msg += took;
+ }
+ }
+ ++msp;
+ }
+ /* If some bits are left, show in hex. */
+ if (len && errs)
+ snprintf(msg, len, "%sMORE:%llX", n ? "," : "",
+ (unsigned long long) errs);
+}
+
+/* only called if r1 set */
+static void flush_fifo(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u32 __iomem *piobuf;
+ u32 bufn;
+ u32 *hdr;
+ u64 pbc;
+ const unsigned hdrwords = 7;
+ static struct qib_ib_header ibhdr = {
+ .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH),
+ .lrh[1] = IB_LID_PERMISSIVE,
+ .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC),
+ .lrh[3] = IB_LID_PERMISSIVE,
+ .u.oth.bth[0] = cpu_to_be32(
+ (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY),
+ .u.oth.bth[1] = cpu_to_be32(0),
+ .u.oth.bth[2] = cpu_to_be32(0),
+ .u.oth.u.ud.deth[0] = cpu_to_be32(0),
+ .u.oth.u.ud.deth[1] = cpu_to_be32(0),
+ };
+
+ /*
+ * Send a dummy VL15 packet to flush the launch FIFO.
+ * This will not actually be sent since the TxeBypassIbc bit is set.
+ */
+ pbc = PBC_7322_VL15_SEND |
+ (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) |
+ (hdrwords + SIZE_OF_CRC);
+ piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn);
+ if (!piobuf)
+ return;
+ writeq(pbc, piobuf);
+ hdr = (u32 *) &ibhdr;
+ if (dd->flags & QIB_PIO_FLUSH_WC) {
+ qib_flush_wc();
+ qib_pio_copy(piobuf + 2, hdr, hdrwords - 1);
+ qib_flush_wc();
+ __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1);
+ qib_flush_wc();
+ } else
+ qib_pio_copy(piobuf + 2, hdr, hdrwords);
+ qib_sendbuf_done(dd, bufn);
+}
+
+/*
+ * This is called with interrupts disabled and sdma_lock held.
+ */
+static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 set_sendctrl = 0;
+ u64 clr_sendctrl = 0;
+
+ if (op & QIB_SDMA_SENDCTRL_OP_ENABLE)
+ set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable);
+
+ if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE)
+ set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable);
+
+ if (op & QIB_SDMA_SENDCTRL_OP_HALT)
+ set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt);
+
+ if (op & QIB_SDMA_SENDCTRL_OP_DRAIN)
+ set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) |
+ SYM_MASK(SendCtrl_0, TxeAbortIbc) |
+ SYM_MASK(SendCtrl_0, TxeDrainRmFifo);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) |
+ SYM_MASK(SendCtrl_0, TxeAbortIbc) |
+ SYM_MASK(SendCtrl_0, TxeDrainRmFifo);
+
+ spin_lock(&dd->sendctrl_lock);
+
+ /* If we are draining everything, block sends first */
+ if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) {
+ ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable);
+ qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ ppd->p_sendctrl |= set_sendctrl;
+ ppd->p_sendctrl &= ~clr_sendctrl;
+
+ if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP)
+ qib_write_kreg_port(ppd, krp_sendctrl,
+ ppd->p_sendctrl |
+ SYM_MASK(SendCtrl_0, SDmaCleanup));
+ else
+ qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) {
+ ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable);
+ qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ spin_unlock(&dd->sendctrl_lock);
+
+ if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1)
+ flush_fifo(ppd);
+}
+
+static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd)
+{
+ __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned);
+}
+
+static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd)
+{
+ /*
+ * Set SendDmaLenGen and clear and set
+ * the MSB of the generation count to enable generation checking
+ * and load the internal generation counter.
+ */
+ qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt);
+ qib_write_kreg_port(ppd, krp_senddmalengen,
+ ppd->sdma_descq_cnt |
+ (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB));
+}
+
+/*
+ * Must be called with sdma_lock held, or before init finished.
+ */
+static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail)
+{
+ /* Commit writes to memory and advance the tail on the chip */
+ wmb();
+ ppd->sdma_descq_tail = tail;
+ qib_write_kreg_port(ppd, krp_senddmatail, tail);
+}
+
+/*
+ * This is called with interrupts disabled and sdma_lock held.
+ */
+static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd)
+{
+ /*
+ * Drain all FIFOs.
+ * The hardware doesn't require this but we do it so that verbs
+ * and user applications don't wait for link active to send stale
+ * data.
+ */
+ sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH);
+
+ qib_sdma_7322_setlengen(ppd);
+ qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */
+ ppd->sdma_head_dma[0] = 0;
+ qib_7322_sdma_sendctrl(ppd,
+ ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP);
+}
+
+#define DISABLES_SDMA ( \
+ QIB_E_P_SDMAHALT | \
+ QIB_E_P_SDMADESCADDRMISALIGN | \
+ QIB_E_P_SDMAMISSINGDW | \
+ QIB_E_P_SDMADWEN | \
+ QIB_E_P_SDMARPYTAG | \
+ QIB_E_P_SDMA1STDESC | \
+ QIB_E_P_SDMABASE | \
+ QIB_E_P_SDMATAILOUTOFBOUND | \
+ QIB_E_P_SDMAOUTOFBOUND | \
+ QIB_E_P_SDMAGENMISMATCH)
+
+static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs)
+{
+ unsigned long flags;
+ struct qib_devdata *dd = ppd->dd;
+
+ errs &= QIB_E_P_SDMAERRS;
+
+ if (errs & QIB_E_P_SDMAUNEXPDATA)
+ qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit,
+ ppd->port);
+
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+
+ switch (ppd->sdma_state.current_state) {
+ case qib_sdma_state_s00_hw_down:
+ break;
+
+ case qib_sdma_state_s10_hw_start_up_wait:
+ if (errs & QIB_E_P_SDMAHALT)
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e20_hw_started);
+ break;
+
+ case qib_sdma_state_s20_idle:
+ break;
+
+ case qib_sdma_state_s30_sw_clean_up_wait:
+ break;
+
+ case qib_sdma_state_s40_hw_clean_up_wait:
+ if (errs & QIB_E_P_SDMAHALT)
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e50_hw_cleaned);
+ break;
+
+ case qib_sdma_state_s50_hw_halt_wait:
+ if (errs & QIB_E_P_SDMAHALT)
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e60_hw_halted);
+ break;
+
+ case qib_sdma_state_s99_running:
+ __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted);
+ __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted);
+ break;
+ }
+
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+}
+
+/*
+ * handle per-device errors (not per-port errors)
+ */
+static noinline void handle_7322_errors(struct qib_devdata *dd)
+{
+ char *msg;
+ u64 iserr = 0;
+ u64 errs;
+ u64 mask;
+ int log_idx;
+
+ qib_stats.sps_errints++;
+ errs = qib_read_kreg64(dd, kr_errstatus);
+ if (!errs) {
+ qib_devinfo(dd->pcidev, "device error interrupt, "
+ "but no error bits set!\n");
+ goto done;
+ }
+
+ /* don't report errors that are masked */
+ errs &= dd->cspec->errormask;
+ msg = dd->cspec->emsgbuf;
+
+ /* do these first, they are most important */
+ if (errs & QIB_E_HARDWARE) {
+ *msg = '\0';
+ qib_7322_handle_hwerrors(dd, msg, sizeof dd->cspec->emsgbuf);
+ } else
+ for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx)
+ if (errs & dd->eep_st_masks[log_idx].errs_to_log)
+ qib_inc_eeprom_err(dd, log_idx, 1);
+
+ if (errs & QIB_E_SPKTERRS) {
+ qib_disarm_7322_senderrbufs(dd->pport);
+ qib_stats.sps_txerrs++;
+ } else if (errs & QIB_E_INVALIDADDR)
+ qib_stats.sps_txerrs++;
+ else if (errs & QIB_E_ARMLAUNCH) {
+ qib_stats.sps_txerrs++;
+ qib_disarm_7322_senderrbufs(dd->pport);
+ }
+ qib_write_kreg(dd, kr_errclear, errs);
+
+ /*
+ * The ones we mask off are handled specially below
+ * or above. Also mask SDMADISABLED by default as it
+ * is too chatty.
+ */
+ mask = QIB_E_HARDWARE;
+ *msg = '\0';
+
+ err_decode(msg, sizeof dd->cspec->emsgbuf, errs & ~mask,
+ qib_7322error_msgs);
+
+ /*
+ * Getting reset is a tragedy for all ports. Mark the device
+ * _and_ the ports as "offline" in way meaningful to each.
+ */
+ if (errs & QIB_E_RESET) {
+ int pidx;
+
+ qib_dev_err(dd, "Got reset, requires re-init "
+ "(unload and reload driver)\n");
+ dd->flags &= ~QIB_INITTED; /* needs re-init */
+ /* mark as having had error */
+ *dd->devstatusp |= QIB_STATUS_HWERROR;
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].link_speed_supported)
+ *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF;
+ }
+
+ if (*msg && iserr)
+ qib_dev_err(dd, "%s error\n", msg);
+
+ /*
+ * If there were hdrq or egrfull errors, wake up any processes
+ * waiting in poll. We used to try to check which contexts had
+ * the overflow, but given the cost of that and the chip reads
+ * to support it, it's better to just wake everybody up if we
+ * get an overflow; waiters can poll again if it's not them.
+ */
+ if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
+ qib_handle_urcv(dd, ~0U);
+ if (errs & ERR_MASK(RcvEgrFullErr))
+ qib_stats.sps_buffull++;
+ else
+ qib_stats.sps_hdrfull++;
+ }
+
+done:
+ return;
+}
+
+static void reenable_chase(unsigned long opaque)
+{
+ struct qib_pportdata *ppd = (struct qib_pportdata *)opaque;
+
+ ppd->cpspec->chase_timer.expires = 0;
+ qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
+ QLOGIC_IB_IBCC_LINKINITCMD_POLL);
+}
+
+static void disable_chase(struct qib_pportdata *ppd, u64 tnow, u8 ibclt)
+{
+ ppd->cpspec->chase_end = 0;
+
+ if (!qib_chase)
+ return;
+
+ qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
+ QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+ ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME;
+ add_timer(&ppd->cpspec->chase_timer);
+}
+
+static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst)
+{
+ u8 ibclt;
+ u64 tnow;
+
+ ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState);
+
+ /*
+ * Detect and handle the state chase issue, where we can
+ * get stuck if we are unlucky on timing on both sides of
+ * the link. If we are, we disable, set a timer, and
+ * then re-enable.
+ */
+ switch (ibclt) {
+ case IB_7322_LT_STATE_CFGRCVFCFG:
+ case IB_7322_LT_STATE_CFGWAITRMT:
+ case IB_7322_LT_STATE_TXREVLANES:
+ case IB_7322_LT_STATE_CFGENH:
+ tnow = get_jiffies_64();
+ if (ppd->cpspec->chase_end &&
+ time_after64(tnow, ppd->cpspec->chase_end))
+ disable_chase(ppd, tnow, ibclt);
+ else if (!ppd->cpspec->chase_end)
+ ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME;
+ break;
+ default:
+ ppd->cpspec->chase_end = 0;
+ break;
+ }
+
+ if (ibclt == IB_7322_LT_STATE_CFGTEST &&
+ (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
+ force_h1(ppd);
+ ppd->cpspec->qdr_reforce = 1;
+ } else if (ppd->cpspec->qdr_reforce &&
+ (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) &&
+ (ibclt == IB_7322_LT_STATE_CFGENH ||
+ ibclt == IB_7322_LT_STATE_CFGIDLE ||
+ ibclt == IB_7322_LT_STATE_LINKUP))
+ force_h1(ppd);
+
+ if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) &&
+ ppd->link_speed_enabled == QIB_IB_QDR &&
+ (ibclt == IB_7322_LT_STATE_CFGTEST ||
+ ibclt == IB_7322_LT_STATE_CFGENH ||
+ (ibclt >= IB_7322_LT_STATE_POLLACTIVE &&
+ ibclt <= IB_7322_LT_STATE_SLEEPQUIET)))
+ adj_tx_serdes(ppd);
+
+ if (!ppd->cpspec->qdr_dfe_on && ibclt != IB_7322_LT_STATE_LINKUP &&
+ ibclt <= IB_7322_LT_STATE_SLEEPQUIET) {
+ ppd->cpspec->qdr_dfe_on = 1;
+ ppd->cpspec->qdr_dfe_time = 0;
+ /* On link down, reenable QDR adaptation */
+ qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
+ ppd->dd->cspec->r1 ?
+ QDR_STATIC_ADAPT_DOWN_R1 :
+ QDR_STATIC_ADAPT_DOWN);
+ }
+}
+
+/*
+ * This is per-pport error handling.
+ * will likely get it's own MSIx interrupt (one for each port,
+ * although just a single handler).
+ */
+static noinline void handle_7322_p_errors(struct qib_pportdata *ppd)
+{
+ char *msg;
+ u64 ignore_this_time = 0, iserr = 0, errs, fmask;
+ struct qib_devdata *dd = ppd->dd;
+
+ /* do this as soon as possible */
+ fmask = qib_read_kreg64(dd, kr_act_fmask);
+ if (!fmask)
+ check_7322_rxe_status(ppd);
+
+ errs = qib_read_kreg_port(ppd, krp_errstatus);
+ if (!errs)
+ qib_devinfo(dd->pcidev,
+ "Port%d error interrupt, but no error bits set!\n",
+ ppd->port);
+ if (!fmask)
+ errs &= ~QIB_E_P_IBSTATUSCHANGED;
+ if (!errs)
+ goto done;
+
+ msg = ppd->cpspec->epmsgbuf;
+ *msg = '\0';
+
+ if (errs & ~QIB_E_P_BITSEXTANT) {
+ err_decode(msg, sizeof ppd->cpspec->epmsgbuf,
+ errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs);
+ if (!*msg)
+ snprintf(msg, sizeof ppd->cpspec->epmsgbuf,
+ "no others");
+ qib_dev_porterr(dd, ppd->port, "error interrupt with unknown"
+ " errors 0x%016Lx set (and %s)\n",
+ (errs & ~QIB_E_P_BITSEXTANT), msg);
+ *msg = '\0';
+ }
+
+ if (errs & QIB_E_P_SHDR) {
+ u64 symptom;
+
+ /* determine cause, then write to clear */
+ symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom);
+ qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0);
+ err_decode(msg, sizeof ppd->cpspec->epmsgbuf, symptom,
+ hdrchk_msgs);
+ *msg = '\0';
+ /* senderrbuf cleared in SPKTERRS below */
+ }
+
+ if (errs & QIB_E_P_SPKTERRS) {
+ if ((errs & QIB_E_P_LINK_PKTERRS) &&
+ !(ppd->lflags & QIBL_LINKACTIVE)) {
+ /*
+ * This can happen when trying to bring the link
+ * up, but the IB link changes state at the "wrong"
+ * time. The IB logic then complains that the packet
+ * isn't valid. We don't want to confuse people, so
+ * we just don't print them, except at debug
+ */
+ err_decode(msg, sizeof ppd->cpspec->epmsgbuf,
+ (errs & QIB_E_P_LINK_PKTERRS),
+ qib_7322p_error_msgs);
+ *msg = '\0';
+ ignore_this_time = errs & QIB_E_P_LINK_PKTERRS;
+ }
+ qib_disarm_7322_senderrbufs(ppd);
+ } else if ((errs & QIB_E_P_LINK_PKTERRS) &&
+ !(ppd->lflags & QIBL_LINKACTIVE)) {
+ /*
+ * This can happen when SMA is trying to bring the link
+ * up, but the IB link changes state at the "wrong" time.
+ * The IB logic then complains that the packet isn't
+ * valid. We don't want to confuse people, so we just
+ * don't print them, except at debug
+ */
+ err_decode(msg, sizeof ppd->cpspec->epmsgbuf, errs,
+ qib_7322p_error_msgs);
+ ignore_this_time = errs & QIB_E_P_LINK_PKTERRS;
+ *msg = '\0';
+ }
+
+ qib_write_kreg_port(ppd, krp_errclear, errs);
+
+ errs &= ~ignore_this_time;
+ if (!errs)
+ goto done;
+
+ if (errs & QIB_E_P_RPKTERRS)
+ qib_stats.sps_rcverrs++;
+ if (errs & QIB_E_P_SPKTERRS)
+ qib_stats.sps_txerrs++;
+
+ iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS);
+
+ if (errs & QIB_E_P_SDMAERRS)
+ sdma_7322_p_errors(ppd, errs);
+
+ if (errs & QIB_E_P_IBSTATUSCHANGED) {
+ u64 ibcs;
+ u8 ltstate;
+
+ ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a);
+ ltstate = qib_7322_phys_portstate(ibcs);
+
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
+ handle_serdes_issues(ppd, ibcs);
+ if (!(ppd->cpspec->ibcctrl_a &
+ SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) {
+ /*
+ * We got our interrupt, so init code should be
+ * happy and not try alternatives. Now squelch
+ * other "chatter" from link-negotiation (pre Init)
+ */
+ ppd->cpspec->ibcctrl_a |=
+ SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a);
+ }
+
+ /* Update our picture of width and speed from chip */
+ ppd->link_width_active =
+ (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ?
+ IB_WIDTH_4X : IB_WIDTH_1X;
+ ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0,
+ LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs &
+ SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ?
+ QIB_IB_DDR : QIB_IB_SDR;
+
+ if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate !=
+ IB_PHYSPORTSTATE_DISABLED)
+ qib_set_ib_7322_lstate(ppd, 0,
+ QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+ else
+ /*
+ * Since going into a recovery state causes the link
+ * state to go down and since recovery is transitory,
+ * it is better if we "miss" ever seeing the link
+ * training state go into recovery (i.e., ignore this
+ * transition for link state special handling purposes)
+ * without updating lastibcstat.
+ */
+ if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER &&
+ ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN &&
+ ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
+ ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
+ qib_handle_e_ibstatuschanged(ppd, ibcs);
+ }
+ if (*msg && iserr)
+ qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
+
+ if (ppd->state_wanted & ppd->lflags)
+ wake_up_interruptible(&ppd->state_wait);
+done:
+ return;
+}
+
+/* enable/disable chip from delivering interrupts */
+static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable)
+{
+ if (enable) {
+ if (dd->flags & QIB_BADINTR)
+ return;
+ qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask);
+ /* cause any pending enabled interrupts to be re-delivered */
+ qib_write_kreg(dd, kr_intclear, 0ULL);
+ if (dd->cspec->num_msix_entries) {
+ /* and same for MSIx */
+ u64 val = qib_read_kreg64(dd, kr_intgranted);
+ if (val)
+ qib_write_kreg(dd, kr_intgranted, val);
+ }
+ } else
+ qib_write_kreg(dd, kr_intmask, 0ULL);
+}
+
+/*
+ * Try to cleanup as much as possible for anything that might have gone
+ * wrong while in freeze mode, such as pio buffers being written by user
+ * processes (causing armlaunch), send errors due to going into freeze mode,
+ * etc., and try to avoid causing extra interrupts while doing so.
+ * Forcibly update the in-memory pioavail register copies after cleanup
+ * because the chip won't do it while in freeze mode (the register values
+ * themselves are kept correct).
+ * Make sure that we don't lose any important interrupts by using the chip
+ * feature that says that writing 0 to a bit in *clear that is set in
+ * *status will cause an interrupt to be generated again (if allowed by
+ * the *mask value).
+ * This is in chip-specific code because of all of the register accesses,
+ * even though the details are similar on most chips.
+ */
+static void qib_7322_clear_freeze(struct qib_devdata *dd)
+{
+ int pidx;
+
+ /* disable error interrupts, to avoid confusion */
+ qib_write_kreg(dd, kr_errmask, 0ULL);
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].link_speed_supported)
+ qib_write_kreg_port(dd->pport + pidx, krp_errmask,
+ 0ULL);
+
+ /* also disable interrupts; errormask is sometimes overwriten */
+ qib_7322_set_intr_state(dd, 0);
+
+ /* clear the freeze, and be sure chip saw it */
+ qib_write_kreg(dd, kr_control, dd->control);
+ qib_read_kreg32(dd, kr_scratch);
+
+ /*
+ * Force new interrupt if any hwerr, error or interrupt bits are
+ * still set, and clear "safe" send packet errors related to freeze
+ * and cancelling sends. Re-enable error interrupts before possible
+ * force of re-interrupt on pending interrupts.
+ */
+ qib_write_kreg(dd, kr_hwerrclear, 0ULL);
+ qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
+ qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
+ /* We need to purge per-port errs and reset mask, too */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ if (!dd->pport[pidx].link_speed_supported)
+ continue;
+ qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull);
+ qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull);
+ }
+ qib_7322_set_intr_state(dd, 1);
+}
+
+/* no error handling to speak of */
+/**
+ * qib_7322_handle_hwerrors - display hardware errors.
+ * @dd: the qlogic_ib device
+ * @msg: the output buffer
+ * @msgl: the size of the output buffer
+ *
+ * Use same msg buffer as regular errors to avoid excessive stack
+ * use. Most hardware errors are catastrophic, but for right now,
+ * we'll print them and continue. We reuse the same message buffer as
+ * qib_handle_errors() to avoid excessive stack usage.
+ */
+static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg,
+ size_t msgl)
+{
+ u64 hwerrs;
+ u32 ctrl;
+ int isfatal = 0;
+
+ hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
+ if (!hwerrs)
+ goto bail;
+ if (hwerrs == ~0ULL) {
+ qib_dev_err(dd, "Read of hardware error status failed "
+ "(all bits set); ignoring\n");
+ goto bail;
+ }
+ qib_stats.sps_hwerrs++;
+
+ /* Always clear the error status register, except BIST fail */
+ qib_write_kreg(dd, kr_hwerrclear, hwerrs &
+ ~HWE_MASK(PowerOnBISTFailed));
+
+ hwerrs &= dd->cspec->hwerrmask;
+
+ /* no EEPROM logging, yet */
+
+ if (hwerrs)
+ qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx "
+ "(cleared)\n", (unsigned long long) hwerrs);
+
+ ctrl = qib_read_kreg32(dd, kr_control);
+ if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) {
+ /*
+ * No recovery yet...
+ */
+ if ((hwerrs & ~HWE_MASK(LATriggered)) ||
+ dd->cspec->stay_in_freeze) {
+ /*
+ * If any set that we aren't ignoring only make the
+ * complaint once, in case it's stuck or recurring,
+ * and we get here multiple times
+ * Force link down, so switch knows, and
+ * LEDs are turned off.
+ */
+ if (dd->flags & QIB_INITTED)
+ isfatal = 1;
+ } else
+ qib_7322_clear_freeze(dd);
+ }
+
+ if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
+ isfatal = 1;
+ strlcpy(msg, "[Memory BIST test failed, "
+ "InfiniPath hardware unusable]", msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+ }
+
+ err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs);
+
+ /* Ignore esoteric PLL failures et al. */
+
+ qib_dev_err(dd, "%s hardware error\n", msg);
+
+ if (isfatal && !dd->diag_client) {
+ qib_dev_err(dd, "Fatal Hardware Error, no longer"
+ " usable, SN %.16s\n", dd->serial);
+ /*
+ * for /sys status file and user programs to print; if no
+ * trailing brace is copied, we'll know it was truncated.
+ */
+ if (dd->freezemsg)
+ snprintf(dd->freezemsg, dd->freezelen,
+ "{%s}", msg);
+ qib_disable_after_error(dd);
+ }
+bail:;
+}
+
+/**
+ * qib_7322_init_hwerrors - enable hardware errors
+ * @dd: the qlogic_ib device
+ *
+ * now that we have finished initializing everything that might reasonably
+ * cause a hardware error, and cleared those errors bits as they occur,
+ * we can enable hardware errors in the mask (potentially enabling
+ * freeze mode), and enable hardware errors as errors (along with
+ * everything else) in errormask
+ */
+static void qib_7322_init_hwerrors(struct qib_devdata *dd)
+{
+ int pidx;
+ u64 extsval;
+
+ extsval = qib_read_kreg64(dd, kr_extstatus);
+ if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED |
+ QIB_EXTS_MEMBIST_ENDTEST)))
+ qib_dev_err(dd, "MemBIST did not complete!\n");
+
+ /* never clear BIST failure, so reported on each driver load */
+ qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+
+ /* clear all */
+ qib_write_kreg(dd, kr_errclear, ~0ULL);
+ /* enable errors that are masked, at least this first time. */
+ qib_write_kreg(dd, kr_errmask, ~0ULL);
+ dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].link_speed_supported)
+ qib_write_kreg_port(dd->pport + pidx, krp_errmask,
+ ~0ULL);
+}
+
+/*
+ * Disable and enable the armlaunch error. Used for PIO bandwidth testing
+ * on chips that are count-based, rather than trigger-based. There is no
+ * reference counting, but that's also fine, given the intended use.
+ * Only chip-specific because it's all register accesses
+ */
+static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable)
+{
+ if (enable) {
+ qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH);
+ dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH;
+ } else
+ dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH;
+ qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
+}
+
+/*
+ * Formerly took parameter <which> in pre-shifted,
+ * pre-merged form with LinkCmd and LinkInitCmd
+ * together, and assuming the zero was NOP.
+ */
+static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd,
+ u16 linitcmd)
+{
+ u64 mod_wd;
+ struct qib_devdata *dd = ppd->dd;
+ unsigned long flags;
+
+ if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
+ /*
+ * If we are told to disable, note that so link-recovery
+ * code does not attempt to bring us back up.
+ * Also reset everything that we can, so we start
+ * completely clean when re-enabled (before we
+ * actually issue the disable to the IBC)
+ */
+ qib_7322_mini_pcs_reset(ppd);
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_LINK_DISABLED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
+ /*
+ * Any other linkinitcmd will lead to LINKDOWN and then
+ * to INIT (if all is well), so clear flag to let
+ * link-recovery code attempt to bring us back up.
+ */
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ /*
+ * Clear status change interrupt reduction so the
+ * new state is seen.
+ */
+ ppd->cpspec->ibcctrl_a &=
+ ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
+ }
+
+ mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) |
+ (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a |
+ mod_wd);
+ /* write to chip to prevent back-to-back writes of ibc reg */
+ qib_write_kreg(dd, kr_scratch, 0);
+
+}
+
+/*
+ * The total RCV buffer memory is 64KB, used for both ports, and is
+ * in units of 64 bytes (same as IB flow control credit unit).
+ * The consumedVL unit in the same registers are in 32 byte units!
+ * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks,
+ * and we can therefore allocate just 9 IB credits for 2 VL15 packets
+ * in krp_rxcreditvl15, rather than 10.
+ */
+#define RCV_BUF_UNITSZ 64
+#define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports))
+
+static void set_vls(struct qib_pportdata *ppd)
+{
+ int i, numvls, totcred, cred_vl, vl0extra;
+ struct qib_devdata *dd = ppd->dd;
+ u64 val;
+
+ numvls = qib_num_vls(ppd->vls_operational);
+
+ /*
+ * Set up per-VL credits. Below is kluge based on these assumptions:
+ * 1) port is disabled at the time early_init is called.
+ * 2) give VL15 17 credits, for two max-plausible packets.
+ * 3) Give VL0-N the rest, with any rounding excess used for VL0
+ */
+ /* 2 VL15 packets @ 288 bytes each (including IB headers) */
+ totcred = NUM_RCV_BUF_UNITS(dd);
+ cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ;
+ totcred -= cred_vl;
+ qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl);
+ cred_vl = totcred / numvls;
+ vl0extra = totcred - cred_vl * numvls;
+ qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra);
+ for (i = 1; i < numvls; i++)
+ qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl);
+ for (; i < 8; i++) /* no buffer space for other VLs */
+ qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0);
+
+ /* Notify IBC that credits need to be recalculated */
+ val = qib_read_kreg_port(ppd, krp_ibsdtestiftx);
+ val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE);
+ qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE);
+ qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
+
+ for (i = 0; i < numvls; i++)
+ val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i);
+ val = qib_read_kreg_port(ppd, krp_rxcreditvl15);
+
+ /* Change the number of operational VLs */
+ ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a &
+ ~SYM_MASK(IBCCtrlA_0, NumVLane)) |
+ ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane));
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+}
+
+/*
+ * The code that deals with actual SerDes is in serdes_7322_init().
+ * Compared to the code for iba7220, it is minimal.
+ */
+static int serdes_7322_init(struct qib_pportdata *ppd);
+
+/**
+ * qib_7322_bringup_serdes - bring up the serdes
+ * @ppd: physical port on the qlogic_ib device
+ */
+static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 val, guid, ibc;
+ unsigned long flags;
+ int ret = 0;
+
+ /*
+ * SerDes model not in Pd, but still need to
+ * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere
+ * eventually.
+ */
+ /* Put IBC in reset, sends disabled (should be in reset already) */
+ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+
+ if (qib_compat_ddr_negotiate) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
+ crp_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd,
+ crp_iblinkerrrecov);
+ }
+
+ /* flowcontrolwatermark is in units of KBytes */
+ ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark);
+ /*
+ * Flow control is sent this often, even if no changes in
+ * buffer space occur. Units are 128ns for this chip.
+ * Set to 3usec.
+ */
+ ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod);
+ /* max error tolerance */
+ ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold);
+ /* IB credit flow control. */
+ ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold);
+ /*
+ * set initial max size pkt IBC will send, including ICRC; it's the
+ * PIO buffer size in dwords, less 1; also see qib_set_mtu()
+ */
+ ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) <<
+ SYM_LSB(IBCCtrlA_0, MaxPktLen);
+ ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */
+
+ /* initially come up waiting for TS1, without sending anything. */
+ val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
+ QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+
+ /*
+ * Reset the PCS interface to the serdes (and also ibc, which is still
+ * in reset from above). Writes new value of ibcctrl_a as last step.
+ */
+ qib_7322_mini_pcs_reset(ppd);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+
+ if (!ppd->cpspec->ibcctrl_b) {
+ unsigned lse = ppd->link_speed_enabled;
+
+ /*
+ * Not on re-init after reset, establish shadow
+ * and force initial config.
+ */
+ ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd,
+ krp_ibcctrl_b);
+ ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR |
+ IBA7322_IBC_SPEED_DDR |
+ IBA7322_IBC_SPEED_SDR |
+ IBA7322_IBC_WIDTH_AUTONEG |
+ SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED));
+ if (lse & (lse - 1)) /* Muliple speeds enabled */
+ ppd->cpspec->ibcctrl_b |=
+ (lse << IBA7322_IBC_SPEED_LSB) |
+ IBA7322_IBC_IBTA_1_2_MASK |
+ IBA7322_IBC_MAX_SPEED_MASK;
+ else
+ ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ?
+ IBA7322_IBC_SPEED_QDR |
+ IBA7322_IBC_IBTA_1_2_MASK :
+ (lse == QIB_IB_DDR) ?
+ IBA7322_IBC_SPEED_DDR :
+ IBA7322_IBC_SPEED_SDR;
+ if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) ==
+ (IB_WIDTH_1X | IB_WIDTH_4X))
+ ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG;
+ else
+ ppd->cpspec->ibcctrl_b |=
+ ppd->link_width_enabled == IB_WIDTH_4X ?
+ IBA7322_IBC_WIDTH_4X_ONLY :
+ IBA7322_IBC_WIDTH_1X_ONLY;
+
+ /* always enable these on driver reload, not sticky */
+ ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK |
+ IBA7322_IBC_HRTBT_MASK);
+ }
+ qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
+
+ /* setup so we have more time at CFGTEST to change H1 */
+ val = qib_read_kreg_port(ppd, krp_ibcctrl_c);
+ val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH);
+ val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH);
+ qib_write_kreg_port(ppd, krp_ibcctrl_c, val);
+
+ serdes_7322_init(ppd);
+
+ guid = be64_to_cpu(ppd->guid);
+ if (!guid) {
+ if (dd->base_guid)
+ guid = be64_to_cpu(dd->base_guid) + ppd->port - 1;
+ ppd->guid = cpu_to_be64(guid);
+ }
+
+ qib_write_kreg_port(ppd, krp_hrtbt_guid, guid);
+ /* write to chip to prevent back-to-back writes of ibc reg */
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ /* Enable port */
+ ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn);
+ set_vls(ppd);
+
+ /* be paranoid against later code motion, etc. */
+ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+ ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable);
+ qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
+ spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+
+ /* Also enable IBSTATUSCHG interrupt. */
+ val = qib_read_kreg_port(ppd, krp_errmask);
+ qib_write_kreg_port(ppd, krp_errmask,
+ val | ERR_MASK_N(IBStatusChanged));
+
+ /* Always zero until we start messing with SerDes for real */
+ return ret;
+}
+
+/**
+ * qib_7322_quiet_serdes - set serdes to txidle
+ * @dd: the qlogic_ib device
+ * Called when driver is being unloaded
+ */
+static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd)
+{
+ u64 val;
+ unsigned long flags;
+
+ qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ wake_up(&ppd->cpspec->autoneg_wait);
+ cancel_delayed_work(&ppd->cpspec->autoneg_work);
+ if (ppd->dd->cspec->r1)
+ cancel_delayed_work(&ppd->cpspec->ipg_work);
+ flush_scheduled_work();
+
+ ppd->cpspec->chase_end = 0;
+ if (ppd->cpspec->chase_timer.data) /* if initted */
+ del_timer_sync(&ppd->cpspec->chase_timer);
+
+ /*
+ * Despite the name, actually disables IBC as well. Do it when
+ * we are as sure as possible that no more packets can be
+ * received, following the down and the PCS reset.
+ * The actual disabling happens in qib_7322_mini_pci_reset(),
+ * along with the PCS being reset.
+ */
+ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn);
+ qib_7322_mini_pcs_reset(ppd);
+
+ /*
+ * Update the adjusted counters so the adjustment persists
+ * across driver reload.
+ */
+ if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta ||
+ ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) {
+ struct qib_devdata *dd = ppd->dd;
+ u64 diagc;
+
+ /* enable counter writes */
+ diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
+ qib_write_kreg(dd, kr_hwdiagctrl,
+ diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
+
+ if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) {
+ val = read_7322_creg32_port(ppd, crp_ibsymbolerr);
+ if (ppd->cpspec->ibdeltainprog)
+ val -= val - ppd->cpspec->ibsymsnap;
+ val -= ppd->cpspec->ibsymdelta;
+ write_7322_creg_port(ppd, crp_ibsymbolerr, val);
+ }
+ if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) {
+ val = read_7322_creg32_port(ppd, crp_iblinkerrrecov);
+ if (ppd->cpspec->ibdeltainprog)
+ val -= val - ppd->cpspec->iblnkerrsnap;
+ val -= ppd->cpspec->iblnkerrdelta;
+ write_7322_creg_port(ppd, crp_iblinkerrrecov, val);
+ }
+ if (ppd->cpspec->iblnkdowndelta) {
+ val = read_7322_creg32_port(ppd, crp_iblinkdown);
+ val += ppd->cpspec->iblnkdowndelta;
+ write_7322_creg_port(ppd, crp_iblinkdown, val);
+ }
+ /*
+ * No need to save ibmalfdelta since IB perfcounters
+ * are cleared on driver reload.
+ */
+
+ /* and disable counter writes */
+ qib_write_kreg(dd, kr_hwdiagctrl, diagc);
+ }
+}
+
+/**
+ * qib_setup_7322_setextled - set the state of the two external LEDs
+ * @ppd: physical port on the qlogic_ib device
+ * @on: whether the link is up or not
+ *
+ * The exact combo of LEDs if on is true is determined by looking
+ * at the ibcstatus.
+ *
+ * These LEDs indicate the physical and logical state of IB link.
+ * For this chip (at least with recommended board pinouts), LED1
+ * is Yellow (logical state) and LED2 is Green (physical state),
+ *
+ * Note: We try to match the Mellanox HCA LED behavior as best
+ * we can. Green indicates physical link state is OK (something is
+ * plugged in, and we can train).
+ * Amber indicates the link is logically up (ACTIVE).
+ * Mellanox further blinks the amber LED to indicate data packet
+ * activity, but we have no hardware support for that, so it would
+ * require waking up every 10-20 msecs and checking the counters
+ * on the chip, and then turning the LED off if appropriate. That's
+ * visible overhead, so not something we will do.
+ */
+static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 extctl, ledblink = 0, val;
+ unsigned long flags;
+ int yel, grn;
+
+ /*
+ * The diags use the LED to indicate diag info, so we leave
+ * the external LED alone when the diags are running.
+ */
+ if (dd->diag_client)
+ return;
+
+ /* Allow override of LED display for, e.g. Locating system in rack */
+ if (ppd->led_override) {
+ grn = (ppd->led_override & QIB_LED_PHYS);
+ yel = (ppd->led_override & QIB_LED_LOG);
+ } else if (on) {
+ val = qib_read_kreg_port(ppd, krp_ibcstatus_a);
+ grn = qib_7322_phys_portstate(val) ==
+ IB_PHYSPORTSTATE_LINKUP;
+ yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE;
+ } else {
+ grn = 0;
+ yel = 0;
+ }
+
+ spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+ extctl = dd->cspec->extctrl & (ppd->port == 1 ?
+ ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK);
+ if (grn) {
+ extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN;
+ /*
+ * Counts are in chip clock (4ns) periods.
+ * This is 1/16 sec (66.6ms) on,
+ * 3/16 sec (187.5 ms) off, with packets rcvd.
+ */
+ ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) |
+ ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT);
+ }
+ if (yel)
+ extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL;
+ dd->cspec->extctrl = extctl;
+ qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
+ spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+
+ if (ledblink) /* blink the LED on packet receive */
+ qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink);
+}
+
+/*
+ * Disable MSIx interrupt if enabled, call generic MSIx code
+ * to cleanup, and clear pending MSIx interrupts.
+ * Used for fallback to INTx, after reset, and when MSIx setup fails.
+ */
+static void qib_7322_nomsix(struct qib_devdata *dd)
+{
+ u64 intgranted;
+ int n;
+
+ dd->cspec->main_int_mask = ~0ULL;
+ n = dd->cspec->num_msix_entries;
+ if (n) {
+ int i;
+
+ dd->cspec->num_msix_entries = 0;
+ for (i = 0; i < n; i++)
+ free_irq(dd->cspec->msix_entries[i].vector,
+ dd->cspec->msix_arg[i]);
+ qib_nomsix(dd);
+ }
+ /* make sure no MSIx interrupts are left pending */
+ intgranted = qib_read_kreg64(dd, kr_intgranted);
+ if (intgranted)
+ qib_write_kreg(dd, kr_intgranted, intgranted);
+}
+
+static void qib_7322_free_irq(struct qib_devdata *dd)
+{
+ if (dd->cspec->irq) {
+ free_irq(dd->cspec->irq, dd);
+ dd->cspec->irq = 0;
+ }
+ qib_7322_nomsix(dd);
+}
+
+static void qib_setup_7322_cleanup(struct qib_devdata *dd)
+{
+ int i;
+
+ qib_7322_free_irq(dd);
+ kfree(dd->cspec->cntrs);
+ kfree(dd->cspec->sendchkenable);
+ kfree(dd->cspec->sendgrhchk);
+ kfree(dd->cspec->sendibchk);
+ kfree(dd->cspec->msix_entries);
+ kfree(dd->cspec->msix_arg);
+ for (i = 0; i < dd->num_pports; i++) {
+ unsigned long flags;
+ u32 mask = QSFP_GPIO_MOD_PRS_N |
+ (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT);
+
+ kfree(dd->pport[i].cpspec->portcntrs);
+ if (dd->flags & QIB_HAS_QSFP) {
+ spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+ dd->cspec->gpio_mask &= ~mask;
+ qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
+ spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+ qib_qsfp_deinit(&dd->pport[i].cpspec->qsfp_data);
+ }
+ if (dd->pport[i].ibport_data.smi_ah)
+ ib_destroy_ah(&dd->pport[i].ibport_data.smi_ah->ibah);
+ }
+}
+
+/* handle SDMA interrupts */
+static void sdma_7322_intr(struct qib_devdata *dd, u64 istat)
+{
+ struct qib_pportdata *ppd0 = &dd->pport[0];
+ struct qib_pportdata *ppd1 = &dd->pport[1];
+ u64 intr0 = istat & (INT_MASK_P(SDma, 0) |
+ INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0));
+ u64 intr1 = istat & (INT_MASK_P(SDma, 1) |
+ INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1));
+
+ if (intr0)
+ qib_sdma_intr(ppd0);
+ if (intr1)
+ qib_sdma_intr(ppd1);
+
+ if (istat & INT_MASK_PM(SDmaCleanupDone, 0))
+ qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started);
+ if (istat & INT_MASK_PM(SDmaCleanupDone, 1))
+ qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started);
+}
+
+/*
+ * Set or clear the Send buffer available interrupt enable bit.
+ */
+static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ if (needint)
+ dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail);
+ else
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail);
+ qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+}
+
+/*
+ * Somehow got an interrupt with reserved bits set in interrupt status.
+ * Print a message so we know it happened, then clear them.
+ * keep mainline interrupt handler cache-friendly
+ */
+static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat)
+{
+ u64 kills;
+ char msg[128];
+
+ kills = istat & ~QIB_I_BITSEXTANT;
+ qib_dev_err(dd, "Clearing reserved interrupt(s) 0x%016llx:"
+ " %s\n", (unsigned long long) kills, msg);
+ qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills));
+}
+
+/* keep mainline interrupt handler cache-friendly */
+static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd)
+{
+ u32 gpiostatus;
+ int handled = 0;
+ int pidx;
+
+ /*
+ * Boards for this chip currently don't use GPIO interrupts,
+ * so clear by writing GPIOstatus to GPIOclear, and complain
+ * to developer. To avoid endless repeats, clear
+ * the bits in the mask, since there is some kind of
+ * programming error or chip problem.
+ */
+ gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
+ /*
+ * In theory, writing GPIOstatus to GPIOclear could
+ * have a bad side-effect on some diagnostic that wanted
+ * to poll for a status-change, but the various shadows
+ * make that problematic at best. Diags will just suppress
+ * all GPIO interrupts during such tests.
+ */
+ qib_write_kreg(dd, kr_gpio_clear, gpiostatus);
+ /*
+ * Check for QSFP MOD_PRS changes
+ * only works for single port if IB1 != pidx1
+ */
+ for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP);
+ ++pidx) {
+ struct qib_pportdata *ppd;
+ struct qib_qsfp_data *qd;
+ u32 mask;
+ if (!dd->pport[pidx].link_speed_supported)
+ continue;
+ mask = QSFP_GPIO_MOD_PRS_N;
+ ppd = dd->pport + pidx;
+ mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx);
+ if (gpiostatus & dd->cspec->gpio_mask & mask) {
+ u64 pins;
+ qd = &ppd->cpspec->qsfp_data;
+ gpiostatus &= ~mask;
+ pins = qib_read_kreg64(dd, kr_extstatus);
+ pins >>= SYM_LSB(EXTStatus, GPIOIn);
+ if (!(pins & mask)) {
+ ++handled;
+ qd->t_insert = get_jiffies_64();
+ schedule_work(&qd->work);
+ }
+ }
+ }
+
+ if (gpiostatus && !handled) {
+ const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
+ u32 gpio_irq = mask & gpiostatus;
+
+ /*
+ * Clear any troublemakers, and update chip from shadow
+ */
+ dd->cspec->gpio_mask &= ~gpio_irq;
+ qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
+ }
+}
+
+/*
+ * Handle errors and unusual events first, separate function
+ * to improve cache hits for fast path interrupt handling.
+ */
+static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat)
+{
+ if (istat & ~QIB_I_BITSEXTANT)
+ unknown_7322_ibits(dd, istat);
+ if (istat & QIB_I_GPIO)
+ unknown_7322_gpio_intr(dd);
+ if (istat & QIB_I_C_ERROR)
+ handle_7322_errors(dd);
+ if (istat & INT_MASK_P(Err, 0) && dd->rcd[0])
+ handle_7322_p_errors(dd->rcd[0]->ppd);
+ if (istat & INT_MASK_P(Err, 1) && dd->rcd[1])
+ handle_7322_p_errors(dd->rcd[1]->ppd);
+}
+
+/*
+ * Dynamically adjust the rcv int timeout for a context based on incoming
+ * packet rate.
+ */
+static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts)
+{
+ struct qib_devdata *dd = rcd->dd;
+ u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt];
+
+ /*
+ * Dynamically adjust idle timeout on chip
+ * based on number of packets processed.
+ */
+ if (npkts < rcv_int_count && timeout > 2)
+ timeout >>= 1;
+ else if (npkts >= rcv_int_count && timeout < rcv_int_timeout)
+ timeout = min(timeout << 1, rcv_int_timeout);
+ else
+ return;
+
+ dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout;
+ qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout);
+}
+
+/*
+ * This is the main interrupt handler.
+ * It will normally only be used for low frequency interrupts but may
+ * have to handle all interrupts if INTx is enabled or fewer than normal
+ * MSIx interrupts were allocated.
+ * This routine should ignore the interrupt bits for any of the
+ * dedicated MSIx handlers.
+ */
+static irqreturn_t qib_7322intr(int irq, void *data)
+{
+ struct qib_devdata *dd = data;
+ irqreturn_t ret;
+ u64 istat;
+ u64 ctxtrbits;
+ u64 rmask;
+ unsigned i;
+ u32 npkts;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ ret = IRQ_HANDLED;
+ goto bail;
+ }
+
+ istat = qib_read_kreg64(dd, kr_intstatus);
+
+ if (unlikely(istat == ~0ULL)) {
+ qib_bad_intrstatus(dd);
+ qib_dev_err(dd, "Interrupt status all f's, skipping\n");
+ /* don't know if it was our interrupt or not */
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
+ istat &= dd->cspec->main_int_mask;
+ if (unlikely(!istat)) {
+ /* already handled, or shared and not us */
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* handle "errors" of various kinds first, device ahead of port */
+ if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO |
+ QIB_I_C_ERROR | INT_MASK_P(Err, 0) |
+ INT_MASK_P(Err, 1))))
+ unlikely_7322_intr(dd, istat);
+
+ /*
+ * Clear the interrupt bits we found set, relatively early, so we
+ * "know" know the chip will have seen this by the time we process
+ * the queue, and will re-interrupt if necessary. The processor
+ * itself won't take the interrupt again until we return.
+ */
+ qib_write_kreg(dd, kr_intclear, istat);
+
+ /*
+ * Handle kernel receive queues before checking for pio buffers
+ * available since receives can overflow; piobuf waiters can afford
+ * a few extra cycles, since they were waiting anyway.
+ */
+ ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK);
+ if (ctxtrbits) {
+ rmask = (1ULL << QIB_I_RCVAVAIL_LSB) |
+ (1ULL << QIB_I_RCVURG_LSB);
+ for (i = 0; i < dd->first_user_ctxt; i++) {
+ if (ctxtrbits & rmask) {
+ ctxtrbits &= ~rmask;
+ if (dd->rcd[i]) {
+ qib_kreceive(dd->rcd[i], NULL, &npkts);
+ adjust_rcv_timeout(dd->rcd[i], npkts);
+ }
+ }
+ rmask <<= 1;
+ }
+ if (ctxtrbits) {
+ ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) |
+ (ctxtrbits >> QIB_I_RCVURG_LSB);
+ qib_handle_urcv(dd, ctxtrbits);
+ }
+ }
+
+ if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1)))
+ sdma_7322_intr(dd, istat);
+
+ if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
+ qib_ib_piobufavail(dd);
+
+ ret = IRQ_HANDLED;
+bail:
+ return ret;
+}
+
+/*
+ * Dedicated receive packet available interrupt handler.
+ */
+static irqreturn_t qib_7322pintr(int irq, void *data)
+{
+ struct qib_ctxtdata *rcd = data;
+ struct qib_devdata *dd = rcd->dd;
+ u32 npkts;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* Clear the interrupt bit we expect to be set. */
+ qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) |
+ (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt);
+
+ qib_kreceive(rcd, NULL, &npkts);
+ adjust_rcv_timeout(rcd, npkts);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Dedicated Send buffer available interrupt handler.
+ */
+static irqreturn_t qib_7322bufavail(int irq, void *data)
+{
+ struct qib_devdata *dd = data;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* Clear the interrupt bit we expect to be set. */
+ qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL);
+
+ /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */
+ if (dd->flags & QIB_INITTED)
+ qib_ib_piobufavail(dd);
+ else
+ qib_wantpiobuf_7322_intr(dd, 0);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Dedicated Send DMA interrupt handler.
+ */
+static irqreturn_t sdma_intr(int irq, void *data)
+{
+ struct qib_pportdata *ppd = data;
+ struct qib_devdata *dd = ppd->dd;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* Clear the interrupt bit we expect to be set. */
+ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
+ INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0));
+ qib_sdma_intr(ppd);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Dedicated Send DMA idle interrupt handler.
+ */
+static irqreturn_t sdma_idle_intr(int irq, void *data)
+{
+ struct qib_pportdata *ppd = data;
+ struct qib_devdata *dd = ppd->dd;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* Clear the interrupt bit we expect to be set. */
+ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
+ INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0));
+ qib_sdma_intr(ppd);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Dedicated Send DMA progress interrupt handler.
+ */
+static irqreturn_t sdma_progress_intr(int irq, void *data)
+{
+ struct qib_pportdata *ppd = data;
+ struct qib_devdata *dd = ppd->dd;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* Clear the interrupt bit we expect to be set. */
+ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
+ INT_MASK_P(SDmaProgress, 1) :
+ INT_MASK_P(SDmaProgress, 0));
+ qib_sdma_intr(ppd);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Dedicated Send DMA cleanup interrupt handler.
+ */
+static irqreturn_t sdma_cleanup_intr(int irq, void *data)
+{
+ struct qib_pportdata *ppd = data;
+ struct qib_devdata *dd = ppd->dd;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+
+ qib_stats.sps_ints++;
+ if (dd->int_counter != (u32) -1)
+ dd->int_counter++;
+
+ /* Clear the interrupt bit we expect to be set. */
+ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
+ INT_MASK_PM(SDmaCleanupDone, 1) :
+ INT_MASK_PM(SDmaCleanupDone, 0));
+ qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up our chip-specific interrupt handler.
+ * The interrupt type has already been setup, so
+ * we just need to do the registration and error checking.
+ * If we are using MSIx interrupts, we may fall back to
+ * INTx later, if the interrupt handler doesn't get called
+ * within 1/2 second (see verify_interrupt()).
+ */
+static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend)
+{
+ int ret, i, msixnum;
+ u64 redirect[6];
+ u64 mask;
+
+ if (!dd->num_pports)
+ return;
+
+ if (clearpend) {
+ /*
+ * if not switching interrupt types, be sure interrupts are
+ * disabled, and then clear anything pending at this point,
+ * because we are starting clean.
+ */
+ qib_7322_set_intr_state(dd, 0);
+
+ /* clear the reset error, init error/hwerror mask */
+ qib_7322_init_hwerrors(dd);
+
+ /* clear any interrupt bits that might be set */
+ qib_write_kreg(dd, kr_intclear, ~0ULL);
+
+ /* make sure no pending MSIx intr, and clear diag reg */
+ qib_write_kreg(dd, kr_intgranted, ~0ULL);
+ qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL);
+ }
+
+ if (!dd->cspec->num_msix_entries) {
+ /* Try to get INTx interrupt */
+try_intx:
+ if (!dd->pcidev->irq) {
+ qib_dev_err(dd, "irq is 0, BIOS error? "
+ "Interrupts won't work\n");
+ goto bail;
+ }
+ ret = request_irq(dd->pcidev->irq, qib_7322intr,
+ IRQF_SHARED, QIB_DRV_NAME, dd);
+ if (ret) {
+ qib_dev_err(dd, "Couldn't setup INTx "
+ "interrupt (irq=%d): %d\n",
+ dd->pcidev->irq, ret);
+ goto bail;
+ }
+ dd->cspec->irq = dd->pcidev->irq;
+ dd->cspec->main_int_mask = ~0ULL;
+ goto bail;
+ }
+
+ /* Try to get MSIx interrupts */
+ memset(redirect, 0, sizeof redirect);
+ mask = ~0ULL;
+ msixnum = 0;
+ for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) {
+ irq_handler_t handler;
+ const char *name;
+ void *arg;
+ u64 val;
+ int lsb, reg, sh;
+
+ if (i < ARRAY_SIZE(irq_table)) {
+ if (irq_table[i].port) {
+ /* skip if for a non-configured port */
+ if (irq_table[i].port > dd->num_pports)
+ continue;
+ arg = dd->pport + irq_table[i].port - 1;
+ } else
+ arg = dd;
+ lsb = irq_table[i].lsb;
+ handler = irq_table[i].handler;
+ name = irq_table[i].name;
+ } else {
+ unsigned ctxt;
+
+ ctxt = i - ARRAY_SIZE(irq_table);
+ /* per krcvq context receive interrupt */
+ arg = dd->rcd[ctxt];
+ if (!arg)
+ continue;
+ lsb = QIB_I_RCVAVAIL_LSB + ctxt;
+ handler = qib_7322pintr;
+ name = QIB_DRV_NAME " (kctx)";
+ }
+ ret = request_irq(dd->cspec->msix_entries[msixnum].vector,
+ handler, 0, name, arg);
+ if (ret) {
+ /*
+ * Shouldn't happen since the enable said we could
+ * have as many as we are trying to setup here.
+ */
+ qib_dev_err(dd, "Couldn't setup MSIx "
+ "interrupt (vec=%d, irq=%d): %d\n", msixnum,
+ dd->cspec->msix_entries[msixnum].vector,
+ ret);
+ qib_7322_nomsix(dd);
+ goto try_intx;
+ }
+ dd->cspec->msix_arg[msixnum] = arg;
+ if (lsb >= 0) {
+ reg = lsb / IBA7322_REDIRECT_VEC_PER_REG;
+ sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) *
+ SYM_LSB(IntRedirect0, vec1);
+ mask &= ~(1ULL << lsb);
+ redirect[reg] |= ((u64) msixnum) << sh;
+ }
+ val = qib_read_kreg64(dd, 2 * msixnum + 1 +
+ (QIB_7322_MsixTable_OFFS / sizeof(u64)));
+ msixnum++;
+ }
+ /* Initialize the vector mapping */
+ for (i = 0; i < ARRAY_SIZE(redirect); i++)
+ qib_write_kreg(dd, kr_intredirect + i, redirect[i]);
+ dd->cspec->main_int_mask = mask;
+bail:;
+}
+
+/**
+ * qib_7322_boardname - fill in the board name and note features
+ * @dd: the qlogic_ib device
+ *
+ * info will be based on the board revision register
+ */
+static unsigned qib_7322_boardname(struct qib_devdata *dd)
+{
+ /* Will need enumeration of board-types here */
+ char *n;
+ u32 boardid, namelen;
+ unsigned features = DUAL_PORT_CAP;
+
+ boardid = SYM_FIELD(dd->revision, Revision, BoardID);
+
+ switch (boardid) {
+ case 0:
+ n = "InfiniPath_QLE7342_Emulation";
+ break;
+ case 1:
+ n = "InfiniPath_QLE7340";
+ dd->flags |= QIB_HAS_QSFP;
+ features = PORT_SPD_CAP;
+ break;
+ case 2:
+ n = "InfiniPath_QLE7342";
+ dd->flags |= QIB_HAS_QSFP;
+ break;
+ case 3:
+ n = "InfiniPath_QMI7342";
+ break;
+ case 4:
+ n = "InfiniPath_Unsupported7342";
+ qib_dev_err(dd, "Unsupported version of QMH7342\n");
+ features = 0;
+ break;
+ case BOARD_QMH7342:
+ n = "InfiniPath_QMH7342";
+ features = 0x24;
+ break;
+ case BOARD_QME7342:
+ n = "InfiniPath_QME7342";
+ break;
+ case 15:
+ n = "InfiniPath_QLE7342_TEST";
+ dd->flags |= QIB_HAS_QSFP;
+ break;
+ default:
+ n = "InfiniPath_QLE73xy_UNKNOWN";
+ qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid);
+ break;
+ }
+ dd->board_atten = 1; /* index into txdds_Xdr */
+
+ namelen = strlen(n) + 1;
+ dd->boardname = kmalloc(namelen, GFP_KERNEL);
+ if (!dd->boardname)
+ qib_dev_err(dd, "Failed allocation for board name: %s\n", n);
+ else
+ snprintf(dd->boardname, namelen, "%s", n);
+
+ snprintf(dd->boardversion, sizeof(dd->boardversion),
+ "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
+ QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
+ (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch),
+ dd->majrev, dd->minrev,
+ (unsigned)SYM_FIELD(dd->revision, Revision_R, SW));
+
+ if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) {
+ qib_devinfo(dd->pcidev, "IB%u: Forced to single port mode"
+ " by module parameter\n", dd->unit);
+ features &= PORT_SPD_CAP;
+ }
+
+ return features;
+}
+
+/*
+ * This routine sleeps, so it can only be called from user context, not
+ * from interrupt context.
+ */
+static int qib_do_7322_reset(struct qib_devdata *dd)
+{
+ u64 val;
+ u64 *msix_vecsave;
+ int i, msix_entries, ret = 1;
+ u16 cmdval;
+ u8 int_line, clinesz;
+ unsigned long flags;
+
+ /* Use dev_err so it shows up in logs, etc. */
+ qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
+
+ qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
+
+ msix_entries = dd->cspec->num_msix_entries;
+
+ /* no interrupts till re-initted */
+ qib_7322_set_intr_state(dd, 0);
+
+ if (msix_entries) {
+ qib_7322_nomsix(dd);
+ /* can be up to 512 bytes, too big for stack */
+ msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries *
+ sizeof(u64), GFP_KERNEL);
+ if (!msix_vecsave)
+ qib_dev_err(dd, "No mem to save MSIx data\n");
+ } else
+ msix_vecsave = NULL;
+
+ /*
+ * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector
+ * info that is set up by the BIOS, so we have to save and restore
+ * it ourselves. There is some risk something could change it,
+ * after we save it, but since we have disabled the MSIx, it
+ * shouldn't be touched...
+ */
+ for (i = 0; i < msix_entries; i++) {
+ u64 vecaddr, vecdata;
+ vecaddr = qib_read_kreg64(dd, 2 * i +
+ (QIB_7322_MsixTable_OFFS / sizeof(u64)));
+ vecdata = qib_read_kreg64(dd, 1 + 2 * i +
+ (QIB_7322_MsixTable_OFFS / sizeof(u64)));
+ if (msix_vecsave) {
+ msix_vecsave[2 * i] = vecaddr;
+ /* save it without the masked bit set */
+ msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL;
+ }
+ }
+
+ dd->pport->cpspec->ibdeltainprog = 0;
+ dd->pport->cpspec->ibsymdelta = 0;
+ dd->pport->cpspec->iblnkerrdelta = 0;
+ dd->pport->cpspec->ibmalfdelta = 0;
+ dd->int_counter = 0; /* so we check interrupts work again */
+
+ /*
+ * Keep chip from being accessed until we are ready. Use
+ * writeq() directly, to allow the write even though QIB_PRESENT
+ * isnt' set.
+ */
+ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
+ dd->flags |= QIB_DOING_RESET;
+ val = dd->control | QLOGIC_IB_C_RESET;
+ writeq(val, &dd->kregbase[kr_control]);
+
+ for (i = 1; i <= 5; i++) {
+ /*
+ * Allow MBIST, etc. to complete; longer on each retry.
+ * We sometimes get machine checks from bus timeout if no
+ * response, so for now, make it *really* long.
+ */
+ msleep(1000 + (1 + i) * 3000);
+
+ qib_pcie_reenable(dd, cmdval, int_line, clinesz);
+
+ /*
+ * Use readq directly, so we don't need to mark it as PRESENT
+ * until we get a successful indication that all is well.
+ */
+ val = readq(&dd->kregbase[kr_revision]);
+ if (val == dd->revision)
+ break;
+ if (i == 5) {
+ qib_dev_err(dd, "Failed to initialize after reset, "
+ "unusable\n");
+ ret = 0;
+ goto bail;
+ }
+ }
+
+ dd->flags |= QIB_PRESENT; /* it's back */
+
+ if (msix_entries) {
+ /* restore the MSIx vector address and data if saved above */
+ for (i = 0; i < msix_entries; i++) {
+ dd->cspec->msix_entries[i].entry = i;
+ if (!msix_vecsave || !msix_vecsave[2 * i])
+ continue;
+ qib_write_kreg(dd, 2 * i +
+ (QIB_7322_MsixTable_OFFS / sizeof(u64)),
+ msix_vecsave[2 * i]);
+ qib_write_kreg(dd, 1 + 2 * i +
+ (QIB_7322_MsixTable_OFFS / sizeof(u64)),
+ msix_vecsave[1 + 2 * i]);
+ }
+ }
+
+ /* initialize the remaining registers. */
+ for (i = 0; i < dd->num_pports; ++i)
+ write_7322_init_portregs(&dd->pport[i]);
+ write_7322_initregs(dd);
+
+ if (qib_pcie_params(dd, dd->lbus_width,
+ &dd->cspec->num_msix_entries,
+ dd->cspec->msix_entries))
+ qib_dev_err(dd, "Reset failed to setup PCIe or interrupts; "
+ "continuing anyway\n");
+
+ qib_setup_7322_interrupt(dd, 1);
+
+ for (i = 0; i < dd->num_pports; ++i) {
+ struct qib_pportdata *ppd = &dd->pport[i];
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
+ ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ }
+
+bail:
+ dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */
+ kfree(msix_vecsave);
+ return ret;
+}
+
+/**
+ * qib_7322_put_tid - write a TID to the chip
+ * @dd: the qlogic_ib device
+ * @tidptr: pointer to the expected TID (in chip) to update
+ * @tidtype: 0 for eager, 1 for expected
+ * @pa: physical address of in memory buffer; tidinvalid if freeing
+ */
+static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
+ u32 type, unsigned long pa)
+{
+ if (!(dd->flags & QIB_PRESENT))
+ return;
+ if (pa != dd->tidinvalid) {
+ u64 chippa = pa >> IBA7322_TID_PA_SHIFT;
+
+ /* paranoia checks */
+ if (pa != (chippa << IBA7322_TID_PA_SHIFT)) {
+ qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
+ pa);
+ return;
+ }
+ if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) {
+ qib_dev_err(dd, "Physical page address 0x%lx "
+ "larger than supported\n", pa);
+ return;
+ }
+
+ if (type == RCVHQ_RCV_TYPE_EAGER)
+ chippa |= dd->tidtemplate;
+ else /* for now, always full 4KB page */
+ chippa |= IBA7322_TID_SZ_4K;
+ pa = chippa;
+ }
+ writeq(pa, tidptr);
+ mmiowb();
+}
+
+/**
+ * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager
+ * @dd: the qlogic_ib device
+ * @ctxt: the ctxt
+ *
+ * clear all TID entries for a ctxt, expected and eager.
+ * Used from qib_close().
+ */
+static void qib_7322_clear_tids(struct qib_devdata *dd,
+ struct qib_ctxtdata *rcd)
+{
+ u64 __iomem *tidbase;
+ unsigned long tidinv;
+ u32 ctxt;
+ int i;
+
+ if (!dd->kregbase || !rcd)
+ return;
+
+ ctxt = rcd->ctxt;
+
+ tidinv = dd->tidinvalid;
+ tidbase = (u64 __iomem *)
+ ((char __iomem *) dd->kregbase +
+ dd->rcvtidbase +
+ ctxt * dd->rcvtidcnt * sizeof(*tidbase));
+
+ for (i = 0; i < dd->rcvtidcnt; i++)
+ qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+ tidinv);
+
+ tidbase = (u64 __iomem *)
+ ((char __iomem *) dd->kregbase +
+ dd->rcvegrbase +
+ rcd->rcvegr_tid_base * sizeof(*tidbase));
+
+ for (i = 0; i < rcd->rcvegrcnt; i++)
+ qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
+ tidinv);
+}
+
+/**
+ * qib_7322_tidtemplate - setup constants for TID updates
+ * @dd: the qlogic_ib device
+ *
+ * We setup stuff that we use a lot, to avoid calculating each time
+ */
+static void qib_7322_tidtemplate(struct qib_devdata *dd)
+{
+ /*
+ * For now, we always allocate 4KB buffers (at init) so we can
+ * receive max size packets. We may want a module parameter to
+ * specify 2KB or 4KB and/or make it per port instead of per device
+ * for those who want to reduce memory footprint. Note that the
+ * rcvhdrentsize size must be large enough to hold the largest
+ * IB header (currently 96 bytes) that we expect to handle (plus of
+ * course the 2 dwords of RHF).
+ */
+ if (dd->rcvegrbufsize == 2048)
+ dd->tidtemplate = IBA7322_TID_SZ_2K;
+ else if (dd->rcvegrbufsize == 4096)
+ dd->tidtemplate = IBA7322_TID_SZ_4K;
+ dd->tidinvalid = 0;
+}
+
+/**
+ * qib_init_7322_get_base_info - set chip-specific flags for user code
+ * @rcd: the qlogic_ib ctxt
+ * @kbase: qib_base_info pointer
+ *
+ * We set the PCIE flag because the lower bandwidth on PCIe vs
+ * HyperTransport can affect some user packet algorithims.
+ */
+
+static int qib_7322_get_base_info(struct qib_ctxtdata *rcd,
+ struct qib_base_info *kinfo)
+{
+ kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP |
+ QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL |
+ QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA;
+ if (rcd->dd->cspec->r1)
+ kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK;
+ if (rcd->dd->flags & QIB_USE_SPCL_TRIG)
+ kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER;
+
+ return 0;
+}
+
+static struct qib_message_header *
+qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
+{
+ u32 offset = qib_hdrget_offset(rhf_addr);
+
+ return (struct qib_message_header *)
+ (rhf_addr - dd->rhf_offset + offset);
+}
+
+/*
+ * Configure number of contexts.
+ */
+static void qib_7322_config_ctxts(struct qib_devdata *dd)
+{
+ unsigned long flags;
+ u32 nchipctxts;
+
+ nchipctxts = qib_read_kreg32(dd, kr_contextcnt);
+ dd->cspec->numctxts = nchipctxts;
+ if (qib_n_krcv_queues > 1 && dd->num_pports) {
+ /*
+ * Set the mask for which bits from the QPN are used
+ * to select a context number.
+ */
+ dd->qpn_mask = 0x3f;
+ dd->first_user_ctxt = NUM_IB_PORTS +
+ (qib_n_krcv_queues - 1) * dd->num_pports;
+ if (dd->first_user_ctxt > nchipctxts)
+ dd->first_user_ctxt = nchipctxts;
+ dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports;
+ } else {
+ dd->first_user_ctxt = NUM_IB_PORTS;
+ dd->n_krcv_queues = 1;
+ }
+
+ if (!qib_cfgctxts) {
+ int nctxts = dd->first_user_ctxt + num_online_cpus();
+
+ if (nctxts <= 6)
+ dd->ctxtcnt = 6;
+ else if (nctxts <= 10)
+ dd->ctxtcnt = 10;
+ else if (nctxts <= nchipctxts)
+ dd->ctxtcnt = nchipctxts;
+ } else if (qib_cfgctxts < dd->num_pports)
+ dd->ctxtcnt = dd->num_pports;
+ else if (qib_cfgctxts <= nchipctxts)
+ dd->ctxtcnt = qib_cfgctxts;
+ if (!dd->ctxtcnt) /* none of the above, set to max */
+ dd->ctxtcnt = nchipctxts;
+
+ /*
+ * Chip can be configured for 6, 10, or 18 ctxts, and choice
+ * affects number of eager TIDs per ctxt (1K, 2K, 4K).
+ * Lock to be paranoid about later motion, etc.
+ */
+ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+ if (dd->ctxtcnt > 10)
+ dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg);
+ else if (dd->ctxtcnt > 6)
+ dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg);
+ /* else configure for default 6 receive ctxts */
+
+ /* The XRC opcode is 5. */
+ dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode);
+
+ /*
+ * RcvCtrl *must* be written here so that the
+ * chip understands how to change rcvegrcnt below.
+ */
+ qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
+ spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+
+ /* kr_rcvegrcnt changes based on the number of contexts enabled */
+ dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
+ dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt,
+ dd->num_pports > 1 ? 1024U : 2048U);
+}
+
+static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which)
+{
+
+ int lsb, ret = 0;
+ u64 maskr; /* right-justified mask */
+
+ switch (which) {
+
+ case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */
+ ret = ppd->link_width_enabled;
+ goto done;
+
+ case QIB_IB_CFG_LWID: /* Get currently active Link-width */
+ ret = ppd->link_width_active;
+ goto done;
+
+ case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
+ ret = ppd->link_speed_enabled;
+ goto done;
+
+ case QIB_IB_CFG_SPD: /* Get current Link spd */
+ ret = ppd->link_speed_active;
+ goto done;
+
+ case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
+ lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
+ maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
+ break;
+
+ case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
+ lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
+ maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
+ break;
+
+ case QIB_IB_CFG_LINKLATENCY:
+ ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) &
+ SYM_MASK(IBCStatusB_0, LinkRoundTripLatency);
+ goto done;
+
+ case QIB_IB_CFG_OP_VLS:
+ ret = ppd->vls_operational;
+ goto done;
+
+ case QIB_IB_CFG_VL_HIGH_CAP:
+ ret = 16;
+ goto done;
+
+ case QIB_IB_CFG_VL_LOW_CAP:
+ ret = 16;
+ goto done;
+
+ case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
+ ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
+ OverrunThreshold);
+ goto done;
+
+ case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
+ ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
+ PhyerrThreshold);
+ goto done;
+
+ case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
+ /* will only take effect when the link state changes */
+ ret = (ppd->cpspec->ibcctrl_a &
+ SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ?
+ IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
+ goto done;
+
+ case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
+ lsb = IBA7322_IBC_HRTBT_LSB;
+ maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */
+ break;
+
+ case QIB_IB_CFG_PMA_TICKS:
+ /*
+ * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs
+ * Since the clock is always 250MHz, the value is 3, 1 or 0.
+ */
+ if (ppd->link_speed_active == QIB_IB_QDR)
+ ret = 3;
+ else if (ppd->link_speed_active == QIB_IB_DDR)
+ ret = 1;
+ else
+ ret = 0;
+ goto done;
+
+ default:
+ ret = -EINVAL;
+ goto done;
+ }
+ ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr);
+done:
+ return ret;
+}
+
+/*
+ * Below again cribbed liberally from older version. Do not lean
+ * heavily on it.
+ */
+#define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB
+#define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \
+ | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16))
+
+static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 maskr; /* right-justified mask */
+ int lsb, ret = 0;
+ u16 lcmd, licmd;
+ unsigned long flags;
+
+ switch (which) {
+ case QIB_IB_CFG_LIDLMC:
+ /*
+ * Set LID and LMC. Combined to avoid possible hazard
+ * caller puts LMC in 16MSbits, DLID in 16LSbits of val
+ */
+ lsb = IBA7322_IBC_DLIDLMC_SHIFT;
+ maskr = IBA7322_IBC_DLIDLMC_MASK;
+ /*
+ * For header-checking, the SLID in the packet will
+ * be masked with SendIBSLMCMask, and compared
+ * with SendIBSLIDAssignMask. Make sure we do not
+ * set any bits not covered by the mask, or we get
+ * false-positives.
+ */
+ qib_write_kreg_port(ppd, krp_sendslid,
+ val & (val >> 16) & SendIBSLIDAssignMask);
+ qib_write_kreg_port(ppd, krp_sendslidmask,
+ (val >> 16) & SendIBSLMCMask);
+ break;
+
+ case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */
+ ppd->link_width_enabled = val;
+ /* convert IB value to chip register value */
+ if (val == IB_WIDTH_1X)
+ val = 0;
+ else if (val == IB_WIDTH_4X)
+ val = 1;
+ else
+ val = 3;
+ maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS);
+ lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS);
+ break;
+
+ case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */
+ /*
+ * As with width, only write the actual register if the
+ * link is currently down, otherwise takes effect on next
+ * link change. Since setting is being explictly requested
+ * (via MAD or sysfs), clear autoneg failure status if speed
+ * autoneg is enabled.
+ */
+ ppd->link_speed_enabled = val;
+ val <<= IBA7322_IBC_SPEED_LSB;
+ maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK |
+ IBA7322_IBC_MAX_SPEED_MASK;
+ if (val & (val - 1)) {
+ /* Muliple speeds enabled */
+ val |= IBA7322_IBC_IBTA_1_2_MASK |
+ IBA7322_IBC_MAX_SPEED_MASK;
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ } else if (val & IBA7322_IBC_SPEED_QDR)
+ val |= IBA7322_IBC_IBTA_1_2_MASK;
+ /* IBTA 1.2 mode + min/max + speed bits are contiguous */
+ lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE);
+ break;
+
+ case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
+ lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
+ maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
+ break;
+
+ case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
+ lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
+ maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
+ break;
+
+ case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
+ maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
+ OverrunThreshold);
+ if (maskr != val) {
+ ppd->cpspec->ibcctrl_a &=
+ ~SYM_MASK(IBCCtrlA_0, OverrunThreshold);
+ ppd->cpspec->ibcctrl_a |= (u64) val <<
+ SYM_LSB(IBCCtrlA_0, OverrunThreshold);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ }
+ goto bail;
+
+ case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
+ maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
+ PhyerrThreshold);
+ if (maskr != val) {
+ ppd->cpspec->ibcctrl_a &=
+ ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold);
+ ppd->cpspec->ibcctrl_a |= (u64) val <<
+ SYM_LSB(IBCCtrlA_0, PhyerrThreshold);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ }
+ goto bail;
+
+ case QIB_IB_CFG_PKEYS: /* update pkeys */
+ maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
+ ((u64) ppd->pkeys[2] << 32) |
+ ((u64) ppd->pkeys[3] << 48);
+ qib_write_kreg_port(ppd, krp_partitionkey, maskr);
+ goto bail;
+
+ case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
+ /* will only take effect when the link state changes */
+ if (val == IB_LINKINITCMD_POLL)
+ ppd->cpspec->ibcctrl_a &=
+ ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState);
+ else /* SLEEP */
+ ppd->cpspec->ibcctrl_a |=
+ SYM_MASK(IBCCtrlA_0, LinkDownDefaultState);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ goto bail;
+
+ case QIB_IB_CFG_MTU: /* update the MTU in IBC */
+ /*
+ * Update our housekeeping variables, and set IBC max
+ * size, same as init code; max IBC is max we allow in
+ * buffer, less the qword pbc, plus 1 for ICRC, in dwords
+ * Set even if it's unchanged, print debug message only
+ * on changes.
+ */
+ val = (ppd->ibmaxlen >> 2) + 1;
+ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen);
+ ppd->cpspec->ibcctrl_a |= (u64)val <<
+ SYM_LSB(IBCCtrlA_0, MaxPktLen);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ goto bail;
+
+ case QIB_IB_CFG_LSTATE: /* set the IB link state */
+ switch (val & 0xffff0000) {
+ case IB_LINKCMD_DOWN:
+ lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
+ ppd->cpspec->ibmalfusesnap = 1;
+ ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd,
+ crp_errlink);
+ if (!ppd->cpspec->ibdeltainprog &&
+ qib_compat_ddr_negotiate) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap =
+ read_7322_creg32_port(ppd,
+ crp_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap =
+ read_7322_creg32_port(ppd,
+ crp_iblinkerrrecov);
+ }
+ break;
+
+ case IB_LINKCMD_ARMED:
+ lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
+ if (ppd->cpspec->ibmalfusesnap) {
+ ppd->cpspec->ibmalfusesnap = 0;
+ ppd->cpspec->ibmalfdelta +=
+ read_7322_creg32_port(ppd,
+ crp_errlink) -
+ ppd->cpspec->ibmalfsnap;
+ }
+ break;
+
+ case IB_LINKCMD_ACTIVE:
+ lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
+ break;
+
+ default:
+ ret = -EINVAL;
+ qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
+ goto bail;
+ }
+ switch (val & 0xffff) {
+ case IB_LINKINITCMD_NOP:
+ licmd = 0;
+ break;
+
+ case IB_LINKINITCMD_POLL:
+ licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
+ break;
+
+ case IB_LINKINITCMD_SLEEP:
+ licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
+ break;
+
+ case IB_LINKINITCMD_DISABLE:
+ licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
+ ppd->cpspec->chase_end = 0;
+ /*
+ * stop state chase counter and timer, if running.
+ * wait forpending timer, but don't clear .data (ppd)!
+ */
+ if (ppd->cpspec->chase_timer.expires) {
+ del_timer_sync(&ppd->cpspec->chase_timer);
+ ppd->cpspec->chase_timer.expires = 0;
+ }
+ break;
+
+ default:
+ ret = -EINVAL;
+ qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
+ val & 0xffff);
+ goto bail;
+ }
+ qib_set_ib_7322_lstate(ppd, lcmd, licmd);
+ goto bail;
+
+ case QIB_IB_CFG_OP_VLS:
+ if (ppd->vls_operational != val) {
+ ppd->vls_operational = val;
+ set_vls(ppd);
+ }
+ goto bail;
+
+ case QIB_IB_CFG_VL_HIGH_LIMIT:
+ qib_write_kreg_port(ppd, krp_highprio_limit, val);
+ goto bail;
+
+ case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
+ if (val > 3) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ lsb = IBA7322_IBC_HRTBT_LSB;
+ maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */
+ break;
+
+ case QIB_IB_CFG_PORT:
+ /* val is the port number of the switch we are connected to. */
+ if (ppd->dd->cspec->r1) {
+ cancel_delayed_work(&ppd->cpspec->ipg_work);
+ ppd->cpspec->ipg_tries = 0;
+ }
+ goto bail;
+
+ default:
+ ret = -EINVAL;
+ goto bail;
+ }
+ ppd->cpspec->ibcctrl_b &= ~(maskr << lsb);
+ ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb);
+ qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
+ qib_write_kreg(dd, kr_scratch, 0);
+bail:
+ return ret;
+}
+
+static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what)
+{
+ int ret = 0;
+ u64 val, ctrlb;
+
+ /* only IBC loopback, may add serdes and xgxs loopbacks later */
+ if (!strncmp(what, "ibc", 3)) {
+ ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0,
+ Loopback);
+ val = 0; /* disable heart beat, so link will come up */
+ qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
+ ppd->dd->unit, ppd->port);
+ } else if (!strncmp(what, "off", 3)) {
+ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0,
+ Loopback);
+ /* enable heart beat again */
+ val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB;
+ qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback "
+ "(normal)\n", ppd->dd->unit, ppd->port);
+ } else
+ ret = -EINVAL;
+ if (!ret) {
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a);
+ ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK
+ << IBA7322_IBC_HRTBT_LSB);
+ ppd->cpspec->ibcctrl_b = ctrlb | val;
+ qib_write_kreg_port(ppd, krp_ibcctrl_b,
+ ppd->cpspec->ibcctrl_b);
+ qib_write_kreg(ppd->dd, kr_scratch, 0);
+ }
+ return ret;
+}
+
+static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno,
+ struct ib_vl_weight_elem *vl)
+{
+ unsigned i;
+
+ for (i = 0; i < 16; i++, regno++, vl++) {
+ u32 val = qib_read_kreg_port(ppd, regno);
+
+ vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) &
+ SYM_RMASK(LowPriority0_0, VirtualLane);
+ vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) &
+ SYM_RMASK(LowPriority0_0, Weight);
+ }
+}
+
+static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno,
+ struct ib_vl_weight_elem *vl)
+{
+ unsigned i;
+
+ for (i = 0; i < 16; i++, regno++, vl++) {
+ u64 val;
+
+ val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) <<
+ SYM_LSB(LowPriority0_0, VirtualLane)) |
+ ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) <<
+ SYM_LSB(LowPriority0_0, Weight));
+ qib_write_kreg_port(ppd, regno, val);
+ }
+ if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) {
+ struct qib_devdata *dd = ppd->dd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn);
+ qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ }
+}
+
+static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t)
+{
+ switch (which) {
+ case QIB_IB_TBL_VL_HIGH_ARB:
+ get_vl_weights(ppd, krp_highprio_0, t);
+ break;
+
+ case QIB_IB_TBL_VL_LOW_ARB:
+ get_vl_weights(ppd, krp_lowprio_0, t);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t)
+{
+ switch (which) {
+ case QIB_IB_TBL_VL_HIGH_ARB:
+ set_vl_weights(ppd, krp_highprio_0, t);
+ break;
+
+ case QIB_IB_TBL_VL_LOW_ARB:
+ set_vl_weights(ppd, krp_lowprio_0, t);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd,
+ u32 updegr, u32 egrhd)
+{
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+ if (updegr)
+ qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
+}
+
+static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd)
+{
+ u32 head, tail;
+
+ head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
+ if (rcd->rcvhdrtail_kvaddr)
+ tail = qib_get_rcvhdrtail(rcd);
+ else
+ tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
+ return head == tail;
+}
+
+#define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \
+ QIB_RCVCTRL_CTXT_DIS | \
+ QIB_RCVCTRL_TIDFLOW_ENB | \
+ QIB_RCVCTRL_TIDFLOW_DIS | \
+ QIB_RCVCTRL_TAILUPD_ENB | \
+ QIB_RCVCTRL_TAILUPD_DIS | \
+ QIB_RCVCTRL_INTRAVAIL_ENB | \
+ QIB_RCVCTRL_INTRAVAIL_DIS | \
+ QIB_RCVCTRL_BP_ENB | \
+ QIB_RCVCTRL_BP_DIS)
+
+#define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \
+ QIB_RCVCTRL_CTXT_DIS | \
+ QIB_RCVCTRL_PKEY_DIS | \
+ QIB_RCVCTRL_PKEY_ENB)
+
+/*
+ * Modify the RCVCTRL register in chip-specific way. This
+ * is a function because bit positions and (future) register
+ * location is chip-specifc, but the needed operations are
+ * generic. <op> is a bit-mask because we often want to
+ * do multiple modifications.
+ */
+static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op,
+ int ctxt)
+{
+ struct qib_devdata *dd = ppd->dd;
+ struct qib_ctxtdata *rcd;
+ u64 mask, val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+
+ if (op & QIB_RCVCTRL_TIDFLOW_ENB)
+ dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable);
+ if (op & QIB_RCVCTRL_TIDFLOW_DIS)
+ dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable);
+ if (op & QIB_RCVCTRL_TAILUPD_ENB)
+ dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd);
+ if (op & QIB_RCVCTRL_TAILUPD_DIS)
+ dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd);
+ if (op & QIB_RCVCTRL_PKEY_ENB)
+ ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable);
+ if (op & QIB_RCVCTRL_PKEY_DIS)
+ ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable);
+ if (ctxt < 0) {
+ mask = (1ULL << dd->ctxtcnt) - 1;
+ rcd = NULL;
+ } else {
+ mask = (1ULL << ctxt);
+ rcd = dd->rcd[ctxt];
+ }
+ if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) {
+ ppd->p_rcvctrl |=
+ (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel));
+ if (!(dd->flags & QIB_NODMA_RTAIL)) {
+ op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */
+ dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd);
+ }
+ /* Write these registers before the context is enabled. */
+ qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt,
+ rcd->rcvhdrqtailaddr_phys);
+ qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt,
+ rcd->rcvhdrq_phys);
+ rcd->seq_cnt = 1;
+ }
+ if (op & QIB_RCVCTRL_CTXT_DIS)
+ ppd->p_rcvctrl &=
+ ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel));
+ if (op & QIB_RCVCTRL_BP_ENB)
+ dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull);
+ if (op & QIB_RCVCTRL_BP_DIS)
+ dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull));
+ if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
+ dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail));
+ if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
+ dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail));
+ /*
+ * Decide which registers to write depending on the ops enabled.
+ * Special case is "flush" (no bits set at all)
+ * which needs to write both.
+ */
+ if (op == 0 || (op & RCVCTRL_COMMON_MODS))
+ qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
+ if (op == 0 || (op & RCVCTRL_PORT_MODS))
+ qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
+ if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) {
+ /*
+ * Init the context registers also; if we were
+ * disabled, tail and head should both be zero
+ * already from the enable, but since we don't
+ * know, we have to do it explictly.
+ */
+ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
+ qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
+
+ /* be sure enabling write seen; hd/tl should be 0 */
+ (void) qib_read_kreg32(dd, kr_scratch);
+ val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
+ dd->rcd[ctxt]->head = val;
+ /* If kctxt, interrupt on next receive. */
+ if (ctxt < dd->first_user_ctxt)
+ val |= dd->rhdrhead_intr_off;
+ qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
+ } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) &&
+ dd->rcd[ctxt] && dd->rhdrhead_intr_off) {
+ /* arm rcv interrupt */
+ val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off;
+ qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
+ }
+ if (op & QIB_RCVCTRL_CTXT_DIS) {
+ unsigned f;
+
+ /* Now that the context is disabled, clear these registers. */
+ if (ctxt >= 0) {
+ qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0);
+ qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0);
+ for (f = 0; f < NUM_TIDFLOWS_CTXT; f++)
+ qib_write_ureg(dd, ur_rcvflowtable + f,
+ TIDFLOW_ERRBITS, ctxt);
+ } else {
+ unsigned i;
+
+ for (i = 0; i < dd->cfgctxts; i++) {
+ qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr,
+ i, 0);
+ qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0);
+ for (f = 0; f < NUM_TIDFLOWS_CTXT; f++)
+ qib_write_ureg(dd, ur_rcvflowtable + f,
+ TIDFLOW_ERRBITS, i);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+}
+
+/*
+ * Modify the SENDCTRL register in chip-specific way. This
+ * is a function where there are multiple such registers with
+ * slightly different layouts.
+ * The chip doesn't allow back-to-back sendctrl writes, so write
+ * the scratch register after writing sendctrl.
+ *
+ * Which register is written depends on the operation.
+ * Most operate on the common register, while
+ * SEND_ENB and SEND_DIS operate on the per-port ones.
+ * SEND_ENB is included in common because it can change SPCL_TRIG
+ */
+#define SENDCTRL_COMMON_MODS (\
+ QIB_SENDCTRL_CLEAR | \
+ QIB_SENDCTRL_AVAIL_DIS | \
+ QIB_SENDCTRL_AVAIL_ENB | \
+ QIB_SENDCTRL_AVAIL_BLIP | \
+ QIB_SENDCTRL_DISARM | \
+ QIB_SENDCTRL_DISARM_ALL | \
+ QIB_SENDCTRL_SEND_ENB)
+
+#define SENDCTRL_PORT_MODS (\
+ QIB_SENDCTRL_CLEAR | \
+ QIB_SENDCTRL_SEND_ENB | \
+ QIB_SENDCTRL_SEND_DIS | \
+ QIB_SENDCTRL_FLUSH)
+
+static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 tmp_dd_sendctrl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+
+ /* First the dd ones that are "sticky", saved in shadow */
+ if (op & QIB_SENDCTRL_CLEAR)
+ dd->sendctrl = 0;
+ if (op & QIB_SENDCTRL_AVAIL_DIS)
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
+ else if (op & QIB_SENDCTRL_AVAIL_ENB) {
+ dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd);
+ if (dd->flags & QIB_USE_SPCL_TRIG)
+ dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn);
+ }
+
+ /* Then the ppd ones that are "sticky", saved in shadow */
+ if (op & QIB_SENDCTRL_SEND_DIS)
+ ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable);
+ else if (op & QIB_SENDCTRL_SEND_ENB)
+ ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable);
+
+ if (op & QIB_SENDCTRL_DISARM_ALL) {
+ u32 i, last;
+
+ tmp_dd_sendctrl = dd->sendctrl;
+ last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
+ /*
+ * Disarm any buffers that are not yet launched,
+ * disabling updates until done.
+ */
+ tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
+ for (i = 0; i < last; i++) {
+ qib_write_kreg(dd, kr_sendctrl,
+ tmp_dd_sendctrl |
+ SYM_MASK(SendCtrl, Disarm) | i);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+ }
+
+ if (op & QIB_SENDCTRL_FLUSH) {
+ u64 tmp_ppd_sendctrl = ppd->p_sendctrl;
+
+ /*
+ * Now drain all the fifos. The Abort bit should never be
+ * needed, so for now, at least, we don't use it.
+ */
+ tmp_ppd_sendctrl |=
+ SYM_MASK(SendCtrl_0, TxeDrainRmFifo) |
+ SYM_MASK(SendCtrl_0, TxeDrainLaFifo) |
+ SYM_MASK(SendCtrl_0, TxeBypassIbc);
+ qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ tmp_dd_sendctrl = dd->sendctrl;
+
+ if (op & QIB_SENDCTRL_DISARM)
+ tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
+ ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) <<
+ SYM_LSB(SendCtrl, DisarmSendBuf));
+ if ((op & QIB_SENDCTRL_AVAIL_BLIP) &&
+ (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
+ tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
+
+ if (op == 0 || (op & SENDCTRL_COMMON_MODS)) {
+ qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ if (op == 0 || (op & SENDCTRL_PORT_MODS)) {
+ qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ if (op & QIB_SENDCTRL_AVAIL_BLIP) {
+ qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+
+ if (op & QIB_SENDCTRL_FLUSH) {
+ u32 v;
+ /*
+ * ensure writes have hit chip, then do a few
+ * more reads, to allow DMA of pioavail registers
+ * to occur, so in-memory copy is in sync with
+ * the chip. Not always safe to sleep.
+ */
+ v = qib_read_kreg32(dd, kr_scratch);
+ qib_write_kreg(dd, kr_scratch, v);
+ v = qib_read_kreg32(dd, kr_scratch);
+ qib_write_kreg(dd, kr_scratch, v);
+ qib_read_kreg32(dd, kr_scratch);
+ }
+}
+
+#define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */
+#define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */
+#define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */
+
+/**
+ * qib_portcntr_7322 - read a per-port chip counter
+ * @ppd: the qlogic_ib pport
+ * @creg: the counter to read (not a chip offset)
+ */
+static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 ret = 0ULL;
+ u16 creg;
+ /* 0xffff for unimplemented or synthesized counters */
+ static const u32 xlator[] = {
+ [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG,
+ [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG,
+ [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount,
+ [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount,
+ [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount,
+ [QIBPORTCNTR_SENDSTALL] = crp_sendstall,
+ [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG,
+ [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount,
+ [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount,
+ [QIBPORTCNTR_RCVEBP] = crp_rcvebp,
+ [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl,
+ [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG,
+ [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */
+ [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr,
+ [QIBPORTCNTR_RXVLERR] = crp_rxvlerr,
+ [QIBPORTCNTR_ERRICRC] = crp_erricrc,
+ [QIBPORTCNTR_ERRVCRC] = crp_errvcrc,
+ [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc,
+ [QIBPORTCNTR_BADFORMAT] = crp_badformat,
+ [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen,
+ [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr,
+ [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen,
+ [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl,
+ [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl,
+ [QIBPORTCNTR_ERRLINK] = crp_errlink,
+ [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown,
+ [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov,
+ [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr,
+ [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt,
+ [QIBPORTCNTR_ERRPKEY] = crp_errpkey,
+ /*
+ * the next 3 aren't really counters, but were implemented
+ * as counters in older chips, so still get accessed as
+ * though they were counters from this code.
+ */
+ [QIBPORTCNTR_PSINTERVAL] = krp_psinterval,
+ [QIBPORTCNTR_PSSTART] = krp_psstart,
+ [QIBPORTCNTR_PSSTAT] = krp_psstat,
+ /* pseudo-counter, summed for all ports */
+ [QIBPORTCNTR_KHDROVFL] = 0xffff,
+ };
+
+ if (reg >= ARRAY_SIZE(xlator)) {
+ qib_devinfo(ppd->dd->pcidev,
+ "Unimplemented portcounter %u\n", reg);
+ goto done;
+ }
+ creg = xlator[reg] & _PORT_CNTR_IDXMASK;
+
+ /* handle non-counters and special cases first */
+ if (reg == QIBPORTCNTR_KHDROVFL) {
+ int i;
+
+ /* sum over all kernel contexts (skip if mini_init) */
+ for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) {
+ struct qib_ctxtdata *rcd = dd->rcd[i];
+
+ if (!rcd || rcd->ppd != ppd)
+ continue;
+ ret += read_7322_creg32(dd, cr_base_egrovfl + i);
+ }
+ goto done;
+ } else if (reg == QIBPORTCNTR_RXDROPPKT) {
+ /*
+ * Used as part of the synthesis of port_rcv_errors
+ * in the verbs code for IBTA counters. Not needed for 7322,
+ * because all the errors are already counted by other cntrs.
+ */
+ goto done;
+ } else if (reg == QIBPORTCNTR_PSINTERVAL ||
+ reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) {
+ /* were counters in older chips, now per-port kernel regs */
+ ret = qib_read_kreg_port(ppd, creg);
+ goto done;
+ }
+
+ /*
+ * Only fast increment counters are 64 bits; use 32 bit reads to
+ * avoid two independent reads when on Opteron.
+ */
+ if (xlator[reg] & _PORT_64BIT_FLAG)
+ ret = read_7322_creg_port(ppd, creg);
+ else
+ ret = read_7322_creg32_port(ppd, creg);
+ if (creg == crp_ibsymbolerr) {
+ if (ppd->cpspec->ibdeltainprog)
+ ret -= ret - ppd->cpspec->ibsymsnap;
+ ret -= ppd->cpspec->ibsymdelta;
+ } else if (creg == crp_iblinkerrrecov) {
+ if (ppd->cpspec->ibdeltainprog)
+ ret -= ret - ppd->cpspec->iblnkerrsnap;
+ ret -= ppd->cpspec->iblnkerrdelta;
+ } else if (creg == crp_errlink)
+ ret -= ppd->cpspec->ibmalfdelta;
+ else if (creg == crp_iblinkdown)
+ ret += ppd->cpspec->iblnkdowndelta;
+done:
+ return ret;
+}
+
+/*
+ * Device counter names (not port-specific), one line per stat,
+ * single string. Used by utilities like ipathstats to print the stats
+ * in a way which works for different versions of drivers, without changing
+ * the utility. Names need to be 12 chars or less (w/o newline), for proper
+ * display by utility.
+ * Non-error counters are first.
+ * Start of "error" conters is indicated by a leading "E " on the first
+ * "error" counter, and doesn't count in label length.
+ * The EgrOvfl list needs to be last so we truncate them at the configured
+ * context count for the device.
+ * cntr7322indices contains the corresponding register indices.
+ */
+static const char cntr7322names[] =
+ "Interrupts\n"
+ "HostBusStall\n"
+ "E RxTIDFull\n"
+ "RxTIDInvalid\n"
+ "RxTIDFloDrop\n" /* 7322 only */
+ "Ctxt0EgrOvfl\n"
+ "Ctxt1EgrOvfl\n"
+ "Ctxt2EgrOvfl\n"
+ "Ctxt3EgrOvfl\n"
+ "Ctxt4EgrOvfl\n"
+ "Ctxt5EgrOvfl\n"
+ "Ctxt6EgrOvfl\n"
+ "Ctxt7EgrOvfl\n"
+ "Ctxt8EgrOvfl\n"
+ "Ctxt9EgrOvfl\n"
+ "Ctx10EgrOvfl\n"
+ "Ctx11EgrOvfl\n"
+ "Ctx12EgrOvfl\n"
+ "Ctx13EgrOvfl\n"
+ "Ctx14EgrOvfl\n"
+ "Ctx15EgrOvfl\n"
+ "Ctx16EgrOvfl\n"
+ "Ctx17EgrOvfl\n"
+ ;
+
+static const u32 cntr7322indices[] = {
+ cr_lbint | _PORT_64BIT_FLAG,
+ cr_lbstall | _PORT_64BIT_FLAG,
+ cr_tidfull,
+ cr_tidinvalid,
+ cr_rxtidflowdrop,
+ cr_base_egrovfl + 0,
+ cr_base_egrovfl + 1,
+ cr_base_egrovfl + 2,
+ cr_base_egrovfl + 3,
+ cr_base_egrovfl + 4,
+ cr_base_egrovfl + 5,
+ cr_base_egrovfl + 6,
+ cr_base_egrovfl + 7,
+ cr_base_egrovfl + 8,
+ cr_base_egrovfl + 9,
+ cr_base_egrovfl + 10,
+ cr_base_egrovfl + 11,
+ cr_base_egrovfl + 12,
+ cr_base_egrovfl + 13,
+ cr_base_egrovfl + 14,
+ cr_base_egrovfl + 15,
+ cr_base_egrovfl + 16,
+ cr_base_egrovfl + 17,
+};
+
+/*
+ * same as cntr7322names and cntr7322indices, but for port-specific counters.
+ * portcntr7322indices is somewhat complicated by some registers needing
+ * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
+ */
+static const char portcntr7322names[] =
+ "TxPkt\n"
+ "TxFlowPkt\n"
+ "TxWords\n"
+ "RxPkt\n"
+ "RxFlowPkt\n"
+ "RxWords\n"
+ "TxFlowStall\n"
+ "TxDmaDesc\n" /* 7220 and 7322-only */
+ "E RxDlidFltr\n" /* 7220 and 7322-only */
+ "IBStatusChng\n"
+ "IBLinkDown\n"
+ "IBLnkRecov\n"
+ "IBRxLinkErr\n"
+ "IBSymbolErr\n"
+ "RxLLIErr\n"
+ "RxBadFormat\n"
+ "RxBadLen\n"
+ "RxBufOvrfl\n"
+ "RxEBP\n"
+ "RxFlowCtlErr\n"
+ "RxICRCerr\n"
+ "RxLPCRCerr\n"
+ "RxVCRCerr\n"
+ "RxInvalLen\n"
+ "RxInvalPKey\n"
+ "RxPktDropped\n"
+ "TxBadLength\n"
+ "TxDropped\n"
+ "TxInvalLen\n"
+ "TxUnderrun\n"
+ "TxUnsupVL\n"
+ "RxLclPhyErr\n" /* 7220 and 7322-only from here down */
+ "RxVL15Drop\n"
+ "RxVlErr\n"
+ "XcessBufOvfl\n"
+ "RxQPBadCtxt\n" /* 7322-only from here down */
+ "TXBadHeader\n"
+ ;
+
+static const u32 portcntr7322indices[] = {
+ QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
+ crp_pktsendflow,
+ QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
+ crp_pktrcvflowctrl,
+ QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
+ crp_txsdmadesc | _PORT_64BIT_FLAG,
+ crp_rxdlidfltr,
+ crp_ibstatuschange,
+ QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
+ crp_rcvflowctrlviol,
+ QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
+ crp_txminmaxlenerr,
+ crp_txdroppedpkt,
+ crp_txlenerr,
+ crp_txunderrun,
+ crp_txunsupvl,
+ QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG,
+ crp_rxqpinvalidctxt,
+ crp_txhdrerr,
+};
+
+/* do all the setup to make the counter reads efficient later */
+static void init_7322_cntrnames(struct qib_devdata *dd)
+{
+ int i, j = 0;
+ char *s;
+
+ for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts;
+ i++) {
+ /* we always have at least one counter before the egrovfl */
+ if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
+ j = 1;
+ s = strchr(s + 1, '\n');
+ if (s && j)
+ j++;
+ }
+ dd->cspec->ncntrs = i;
+ if (!s)
+ /* full list; size is without terminating null */
+ dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1;
+ else
+ dd->cspec->cntrnamelen = 1 + s - cntr7322names;
+ dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs
+ * sizeof(u64), GFP_KERNEL);
+ if (!dd->cspec->cntrs)
+ qib_dev_err(dd, "Failed allocation for counters\n");
+
+ for (i = 0, s = (char *)portcntr7322names; s; i++)
+ s = strchr(s + 1, '\n');
+ dd->cspec->nportcntrs = i - 1;
+ dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1;
+ for (i = 0; i < dd->num_pports; ++i) {
+ dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs
+ * sizeof(u64), GFP_KERNEL);
+ if (!dd->pport[i].cpspec->portcntrs)
+ qib_dev_err(dd, "Failed allocation for"
+ " portcounters\n");
+ }
+}
+
+static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
+ u64 **cntrp)
+{
+ u32 ret;
+
+ if (namep) {
+ ret = dd->cspec->cntrnamelen;
+ if (pos >= ret)
+ ret = 0; /* final read after getting everything */
+ else
+ *namep = (char *) cntr7322names;
+ } else {
+ u64 *cntr = dd->cspec->cntrs;
+ int i;
+
+ ret = dd->cspec->ncntrs * sizeof(u64);
+ if (!cntr || pos >= ret) {
+ /* everything read, or couldn't get memory */
+ ret = 0;
+ goto done;
+ }
+ *cntrp = cntr;
+ for (i = 0; i < dd->cspec->ncntrs; i++)
+ if (cntr7322indices[i] & _PORT_64BIT_FLAG)
+ *cntr++ = read_7322_creg(dd,
+ cntr7322indices[i] &
+ _PORT_CNTR_IDXMASK);
+ else
+ *cntr++ = read_7322_creg32(dd,
+ cntr7322indices[i]);
+ }
+done:
+ return ret;
+}
+
+static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
+ char **namep, u64 **cntrp)
+{
+ u32 ret;
+
+ if (namep) {
+ ret = dd->cspec->portcntrnamelen;
+ if (pos >= ret)
+ ret = 0; /* final read after getting everything */
+ else
+ *namep = (char *)portcntr7322names;
+ } else {
+ struct qib_pportdata *ppd = &dd->pport[port];
+ u64 *cntr = ppd->cpspec->portcntrs;
+ int i;
+
+ ret = dd->cspec->nportcntrs * sizeof(u64);
+ if (!cntr || pos >= ret) {
+ /* everything read, or couldn't get memory */
+ ret = 0;
+ goto done;
+ }
+ *cntrp = cntr;
+ for (i = 0; i < dd->cspec->nportcntrs; i++) {
+ if (portcntr7322indices[i] & _PORT_VIRT_FLAG)
+ *cntr++ = qib_portcntr_7322(ppd,
+ portcntr7322indices[i] &
+ _PORT_CNTR_IDXMASK);
+ else if (portcntr7322indices[i] & _PORT_64BIT_FLAG)
+ *cntr++ = read_7322_creg_port(ppd,
+ portcntr7322indices[i] &
+ _PORT_CNTR_IDXMASK);
+ else
+ *cntr++ = read_7322_creg32_port(ppd,
+ portcntr7322indices[i]);
+ }
+ }
+done:
+ return ret;
+}
+
+/**
+ * qib_get_7322_faststats - get word counters from chip before they overflow
+ * @opaque - contains a pointer to the qlogic_ib device qib_devdata
+ *
+ * VESTIGIAL IBA7322 has no "small fast counters", so the only
+ * real purpose of this function is to maintain the notion of
+ * "active time", which in turn is only logged into the eeprom,
+ * which we don;t have, yet, for 7322-based boards.
+ *
+ * called from add_timer
+ */
+static void qib_get_7322_faststats(unsigned long opaque)
+{
+ struct qib_devdata *dd = (struct qib_devdata *) opaque;
+ struct qib_pportdata *ppd;
+ unsigned long flags;
+ u64 traffic_wds;
+ int pidx;
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+
+ /*
+ * If port isn't enabled or not operational ports, or
+ * diags is running (can cause memory diags to fail)
+ * skip this port this time.
+ */
+ if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED)
+ || dd->diag_client)
+ continue;
+
+ /*
+ * Maintain an activity timer, based on traffic
+ * exceeding a threshold, so we need to check the word-counts
+ * even if they are 64-bit.
+ */
+ traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) +
+ qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND);
+ spin_lock_irqsave(&ppd->dd->eep_st_lock, flags);
+ traffic_wds -= ppd->dd->traffic_wds;
+ ppd->dd->traffic_wds += traffic_wds;
+ if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
+ atomic_add(ACTIVITY_TIMER, &ppd->dd->active_time);
+ spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags);
+ if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active &
+ QIB_IB_QDR) &&
+ (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
+ QIBL_LINKACTIVE)) &&
+ ppd->cpspec->qdr_dfe_time &&
+ time_after64(get_jiffies_64(), ppd->cpspec->qdr_dfe_time)) {
+ ppd->cpspec->qdr_dfe_on = 0;
+
+ qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
+ ppd->dd->cspec->r1 ?
+ QDR_STATIC_ADAPT_INIT_R1 :
+ QDR_STATIC_ADAPT_INIT);
+ force_h1(ppd);
+ }
+ }
+ mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
+}
+
+/*
+ * If we were using MSIx, try to fallback to INTx.
+ */
+static int qib_7322_intr_fallback(struct qib_devdata *dd)
+{
+ if (!dd->cspec->num_msix_entries)
+ return 0; /* already using INTx */
+
+ qib_devinfo(dd->pcidev, "MSIx interrupt not detected,"
+ " trying INTx interrupts\n");
+ qib_7322_nomsix(dd);
+ qib_enable_intx(dd->pcidev);
+ qib_setup_7322_interrupt(dd, 0);
+ return 1;
+}
+
+/*
+ * Reset the XGXS (between serdes and IBC). Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining. To do this right, we reset IBC
+ * as well, then return to previous state (which may be still in reset)
+ * NOTE: some callers of this "know" this writes the current value
+ * of cpspec->ibcctrl_a as part of it's operation, so if that changes,
+ * check all callers.
+ */
+static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd)
+{
+ u64 val;
+ struct qib_devdata *dd = ppd->dd;
+ const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) |
+ SYM_MASK(IBPCSConfig_0, xcv_treset) |
+ SYM_MASK(IBPCSConfig_0, tx_rx_reset);
+
+ val = qib_read_kreg_port(ppd, krp_ib_pcsconfig);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a &
+ ~SYM_MASK(IBCCtrlA_0, IBLinkEn));
+
+ qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits);
+ qib_read_kreg32(dd, kr_scratch);
+ qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+}
+
+/*
+ * This code for non-IBTA-compliant IB speed negotiation is only known to
+ * work for the SDR to DDR transition, and only between an HCA and a switch
+ * with recent firmware. It is based on observed heuristics, rather than
+ * actual knowledge of the non-compliant speed negotiation.
+ * It has a number of hard-coded fields, since the hope is to rewrite this
+ * when a spec is available on how the negoation is intended to work.
+ */
+static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr,
+ u32 dcnt, u32 *data)
+{
+ int i;
+ u64 pbc;
+ u32 __iomem *piobuf;
+ u32 pnum, control, len;
+ struct qib_devdata *dd = ppd->dd;
+
+ i = 0;
+ len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
+ control = qib_7322_setpbc_control(ppd, len, 0, 15);
+ pbc = ((u64) control << 32) | len;
+ while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) {
+ if (i++ > 15)
+ return;
+ udelay(2);
+ }
+ /* disable header check on this packet, since it can't be valid */
+ dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL);
+ writeq(pbc, piobuf);
+ qib_flush_wc();
+ qib_pio_copy(piobuf + 2, hdr, 7);
+ qib_pio_copy(piobuf + 9, data, dcnt);
+ if (dd->flags & QIB_USE_SPCL_TRIG) {
+ u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023;
+
+ qib_flush_wc();
+ __raw_writel(0xaebecede, piobuf + spcl_off);
+ }
+ qib_flush_wc();
+ qib_sendbuf_done(dd, pnum);
+ /* and re-enable hdr check */
+ dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL);
+}
+
+/*
+ * _start packet gets sent twice at start, _done gets sent twice at end
+ */
+static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which)
+{
+ struct qib_devdata *dd = ppd->dd;
+ static u32 swapped;
+ u32 dw, i, hcnt, dcnt, *data;
+ static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
+ static u32 madpayload_start[0x40] = {
+ 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
+ 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+ 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
+ };
+ static u32 madpayload_done[0x40] = {
+ 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
+ 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+ 0x40000001, 0x1388, 0x15e, /* rest 0's */
+ };
+
+ dcnt = ARRAY_SIZE(madpayload_start);
+ hcnt = ARRAY_SIZE(hdr);
+ if (!swapped) {
+ /* for maintainability, do it at runtime */
+ for (i = 0; i < hcnt; i++) {
+ dw = (__force u32) cpu_to_be32(hdr[i]);
+ hdr[i] = dw;
+ }
+ for (i = 0; i < dcnt; i++) {
+ dw = (__force u32) cpu_to_be32(madpayload_start[i]);
+ madpayload_start[i] = dw;
+ dw = (__force u32) cpu_to_be32(madpayload_done[i]);
+ madpayload_done[i] = dw;
+ }
+ swapped = 1;
+ }
+
+ data = which ? madpayload_done : madpayload_start;
+
+ autoneg_7322_sendpkt(ppd, hdr, dcnt, data);
+ qib_read_kreg64(dd, kr_scratch);
+ udelay(2);
+ autoneg_7322_sendpkt(ppd, hdr, dcnt, data);
+ qib_read_kreg64(dd, kr_scratch);
+ udelay(2);
+}
+
+/*
+ * Do the absolute minimum to cause an IB speed change, and make it
+ * ready, but don't actually trigger the change. The caller will
+ * do that when ready (if link is in Polling training state, it will
+ * happen immediately, otherwise when link next goes down)
+ *
+ * This routine should only be used as part of the DDR autonegotation
+ * code for devices that are not compliant with IB 1.2 (or code that
+ * fixes things up for same).
+ *
+ * When link has gone down, and autoneg enabled, or autoneg has
+ * failed and we give up until next time we set both speeds, and
+ * then we want IBTA enabled as well as "use max enabled speed.
+ */
+static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed)
+{
+ u64 newctrlb;
+ newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK |
+ IBA7322_IBC_IBTA_1_2_MASK |
+ IBA7322_IBC_MAX_SPEED_MASK);
+
+ if (speed & (speed - 1)) /* multiple speeds */
+ newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) |
+ IBA7322_IBC_IBTA_1_2_MASK |
+ IBA7322_IBC_MAX_SPEED_MASK;
+ else
+ newctrlb |= speed == QIB_IB_QDR ?
+ IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK :
+ ((speed == QIB_IB_DDR ?
+ IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR));
+
+ if (newctrlb == ppd->cpspec->ibcctrl_b)
+ return;
+
+ ppd->cpspec->ibcctrl_b = newctrlb;
+ qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
+ qib_write_kreg(ppd->dd, kr_scratch, 0);
+}
+
+/*
+ * This routine is only used when we are not talking to another
+ * IB 1.2-compliant device that we think can do DDR.
+ * (This includes all existing switch chips as of Oct 2007.)
+ * 1.2-compliant devices go directly to DDR prior to reaching INIT
+ */
+static void try_7322_autoneg(struct qib_pportdata *ppd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_AUTONEG_INPROG;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ qib_autoneg_7322_send(ppd, 0);
+ set_7322_ibspeed_fast(ppd, QIB_IB_DDR);
+ qib_7322_mini_pcs_reset(ppd);
+ /* 2 msec is minimum length of a poll cycle */
+ schedule_delayed_work(&ppd->cpspec->autoneg_work,
+ msecs_to_jiffies(2));
+}
+
+/*
+ * Handle the empirically determined mechanism for auto-negotiation
+ * of DDR speed with switches.
+ */
+static void autoneg_7322_work(struct work_struct *work)
+{
+ struct qib_pportdata *ppd;
+ struct qib_devdata *dd;
+ u64 startms;
+ u32 i;
+ unsigned long flags;
+
+ ppd = container_of(work, struct qib_chippport_specific,
+ autoneg_work.work)->ppd;
+ dd = ppd->dd;
+
+ startms = jiffies_to_msecs(jiffies);
+
+ /*
+ * Busy wait for this first part, it should be at most a
+ * few hundred usec, since we scheduled ourselves for 2msec.
+ */
+ for (i = 0; i < 25; i++) {
+ if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState)
+ == IB_7322_LT_STATE_POLLQUIET) {
+ qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE);
+ break;
+ }
+ udelay(100);
+ }
+
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
+ goto done; /* we got there early or told to stop */
+
+ /* we expect this to timeout */
+ if (wait_event_timeout(ppd->cpspec->autoneg_wait,
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(90)))
+ goto done;
+ qib_7322_mini_pcs_reset(ppd);
+
+ /* we expect this to timeout */
+ if (wait_event_timeout(ppd->cpspec->autoneg_wait,
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(1700)))
+ goto done;
+ qib_7322_mini_pcs_reset(ppd);
+
+ set_7322_ibspeed_fast(ppd, QIB_IB_SDR);
+
+ /*
+ * Wait up to 250 msec for link to train and get to INIT at DDR;
+ * this should terminate early.
+ */
+ wait_event_timeout(ppd->cpspec->autoneg_wait,
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(250));
+done:
+ if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) {
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
+ if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) {
+ ppd->lflags |= QIBL_IB_AUTONEG_FAILED;
+ ppd->cpspec->autoneg_tries = 0;
+ }
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
+ }
+}
+
+/*
+ * This routine is used to request IPG set in the QLogic switch.
+ * Only called if r1.
+ */
+static void try_7322_ipg(struct qib_pportdata *ppd)
+{
+ struct qib_ibport *ibp = &ppd->ibport_data;
+ struct ib_mad_send_buf *send_buf;
+ struct ib_mad_agent *agent;
+ struct ib_smp *smp;
+ unsigned delay;
+ int ret;
+
+ agent = ibp->send_agent;
+ if (!agent)
+ goto retry;
+
+ send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR,
+ IB_MGMT_MAD_DATA, GFP_ATOMIC);
+ if (IS_ERR(send_buf))
+ goto retry;
+
+ if (!ibp->smi_ah) {
+ struct ib_ah_attr attr;
+ struct ib_ah *ah;
+
+ memset(&attr, 0, sizeof attr);
+ attr.dlid = be16_to_cpu(IB_LID_PERMISSIVE);
+ attr.port_num = ppd->port;
+ ah = ib_create_ah(ibp->qp0->ibqp.pd, &attr);
+ if (IS_ERR(ah))
+ ret = -EINVAL;
+ else {
+ send_buf->ah = ah;
+ ibp->smi_ah = to_iah(ah);
+ ret = 0;
+ }
+ } else {
+ send_buf->ah = &ibp->smi_ah->ibah;
+ ret = 0;
+ }
+
+ smp = send_buf->mad;
+ smp->base_version = IB_MGMT_BASE_VERSION;
+ smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE;
+ smp->class_version = 1;
+ smp->method = IB_MGMT_METHOD_SEND;
+ smp->hop_cnt = 1;
+ smp->attr_id = QIB_VENDOR_IPG;
+ smp->attr_mod = 0;
+
+ if (!ret)
+ ret = ib_post_send_mad(send_buf, NULL);
+ if (ret)
+ ib_free_send_mad(send_buf);
+retry:
+ delay = 2 << ppd->cpspec->ipg_tries;
+ schedule_delayed_work(&ppd->cpspec->ipg_work, msecs_to_jiffies(delay));
+}
+
+/*
+ * Timeout handler for setting IPG.
+ * Only called if r1.
+ */
+static void ipg_7322_work(struct work_struct *work)
+{
+ struct qib_pportdata *ppd;
+
+ ppd = container_of(work, struct qib_chippport_specific,
+ ipg_work.work)->ppd;
+ if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE))
+ && ++ppd->cpspec->ipg_tries <= 10)
+ try_7322_ipg(ppd);
+}
+
+static u32 qib_7322_iblink_state(u64 ibcs)
+{
+ u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState);
+
+ switch (state) {
+ case IB_7322_L_STATE_INIT:
+ state = IB_PORT_INIT;
+ break;
+ case IB_7322_L_STATE_ARM:
+ state = IB_PORT_ARMED;
+ break;
+ case IB_7322_L_STATE_ACTIVE:
+ /* fall through */
+ case IB_7322_L_STATE_ACT_DEFER:
+ state = IB_PORT_ACTIVE;
+ break;
+ default: /* fall through */
+ case IB_7322_L_STATE_DOWN:
+ state = IB_PORT_DOWN;
+ break;
+ }
+ return state;
+}
+
+/* returns the IBTA port state, rather than the IBC link training state */
+static u8 qib_7322_phys_portstate(u64 ibcs)
+{
+ u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState);
+ return qib_7322_physportstate[state];
+}
+
+static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
+{
+ int ret = 0, symadj = 0;
+ unsigned long flags;
+ int mult;
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+
+ /* Update our picture of width and speed from chip */
+ if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) {
+ ppd->link_speed_active = QIB_IB_QDR;
+ mult = 4;
+ } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) {
+ ppd->link_speed_active = QIB_IB_DDR;
+ mult = 2;
+ } else {
+ ppd->link_speed_active = QIB_IB_SDR;
+ mult = 1;
+ }
+ if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) {
+ ppd->link_width_active = IB_WIDTH_4X;
+ mult *= 4;
+ } else
+ ppd->link_width_active = IB_WIDTH_1X;
+ ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)];
+
+ if (!ibup) {
+ u64 clr;
+
+ /* Link went down. */
+ /* do IPG MAD again after linkdown, even if last time failed */
+ ppd->cpspec->ipg_tries = 0;
+ clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) &
+ (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) |
+ SYM_MASK(IBCStatusB_0, heartbeat_crosstalk));
+ if (clr)
+ qib_write_kreg_port(ppd, krp_ibcstatus_b, clr);
+ if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
+ QIBL_IB_AUTONEG_INPROG)))
+ set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ /* unlock the Tx settings, speed may change */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+ qib_cancel_sends(ppd);
+ /* on link down, ensure sane pcs state */
+ qib_7322_mini_pcs_reset(ppd);
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+ if (__qib_sdma_running(ppd))
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e70_go_idle);
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+ }
+ clr = read_7322_creg32_port(ppd, crp_iblinkdown);
+ if (clr == ppd->cpspec->iblnkdownsnap)
+ ppd->cpspec->iblnkdowndelta++;
+ } else {
+ if (qib_compat_ddr_negotiate &&
+ !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
+ QIBL_IB_AUTONEG_INPROG)) &&
+ ppd->link_speed_active == QIB_IB_SDR &&
+ (ppd->link_speed_enabled & QIB_IB_DDR)
+ && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) {
+ /* we are SDR, and auto-negotiation enabled */
+ ++ppd->cpspec->autoneg_tries;
+ if (!ppd->cpspec->ibdeltainprog) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymdelta +=
+ read_7322_creg32_port(ppd,
+ crp_ibsymbolerr) -
+ ppd->cpspec->ibsymsnap;
+ ppd->cpspec->iblnkerrdelta +=
+ read_7322_creg32_port(ppd,
+ crp_iblinkerrrecov) -
+ ppd->cpspec->iblnkerrsnap;
+ }
+ try_7322_autoneg(ppd);
+ ret = 1; /* no other IB status change processing */
+ } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
+ ppd->link_speed_active == QIB_IB_SDR) {
+ qib_autoneg_7322_send(ppd, 1);
+ set_7322_ibspeed_fast(ppd, QIB_IB_DDR);
+ qib_7322_mini_pcs_reset(ppd);
+ udelay(2);
+ ret = 1; /* no other IB status change processing */
+ } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
+ (ppd->link_speed_active & QIB_IB_DDR)) {
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG |
+ QIBL_IB_AUTONEG_FAILED);
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ ppd->cpspec->autoneg_tries = 0;
+ /* re-enable SDR, for next link down */
+ set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
+ wake_up(&ppd->cpspec->autoneg_wait);
+ symadj = 1;
+ } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) {
+ /*
+ * Clear autoneg failure flag, and do setup
+ * so we'll try next time link goes down and
+ * back to INIT (possibly connected to a
+ * different device).
+ */
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK;
+ symadj = 1;
+ }
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ symadj = 1;
+ if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10)
+ try_7322_ipg(ppd);
+ if (!ppd->cpspec->recovery_init)
+ setup_7322_link_recovery(ppd, 0);
+ ppd->cpspec->qdr_dfe_time = jiffies +
+ msecs_to_jiffies(QDR_DFE_DISABLE_DELAY);
+ }
+ ppd->cpspec->ibmalfusesnap = 0;
+ ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd,
+ crp_errlink);
+ }
+ if (symadj) {
+ ppd->cpspec->iblnkdownsnap =
+ read_7322_creg32_port(ppd, crp_iblinkdown);
+ if (ppd->cpspec->ibdeltainprog) {
+ ppd->cpspec->ibdeltainprog = 0;
+ ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd,
+ crp_ibsymbolerr) - ppd->cpspec->ibsymsnap;
+ ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd,
+ crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap;
+ }
+ } else if (!ibup && qib_compat_ddr_negotiate &&
+ !ppd->cpspec->ibdeltainprog &&
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
+ crp_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd,
+ crp_iblinkerrrecov);
+ }
+
+ if (!ret)
+ qib_setup_7322_setextled(ppd, ibup);
+ return ret;
+}
+
+/*
+ * Does read/modify/write to appropriate registers to
+ * set output and direction bits selected by mask.
+ * these are in their canonical postions (e.g. lsb of
+ * dir will end up in D48 of extctrl on existing chips).
+ * returns contents of GP Inputs.
+ */
+static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
+{
+ u64 read_val, new_out;
+ unsigned long flags;
+
+ if (mask) {
+ /* some bits being written, lock access to GPIO */
+ dir &= mask;
+ out &= mask;
+ spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+ dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
+ dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
+ new_out = (dd->cspec->gpio_out & ~mask) | out;
+
+ qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
+ qib_write_kreg(dd, kr_gpio_out, new_out);
+ dd->cspec->gpio_out = new_out;
+ spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+ }
+ /*
+ * It is unlikely that a read at this time would get valid
+ * data on a pin whose direction line was set in the same
+ * call to this function. We include the read here because
+ * that allows us to potentially combine a change on one pin with
+ * a read on another, and because the old code did something like
+ * this.
+ */
+ read_val = qib_read_kreg64(dd, kr_extstatus);
+ return SYM_FIELD(read_val, EXTStatus, GPIOIn);
+}
+
+/* Enable writes to config EEPROM, if possible. Returns previous state */
+static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen)
+{
+ int prev_wen;
+ u32 mask;
+
+ mask = 1 << QIB_EEPROM_WEN_NUM;
+ prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM;
+ gpio_7322_mod(dd, wen ? 0 : mask, mask, mask);
+
+ return prev_wen & 1;
+}
+
+/*
+ * Read fundamental info we need to use the chip. These are
+ * the registers that describe chip capabilities, and are
+ * saved in shadow registers.
+ */
+static void get_7322_chip_params(struct qib_devdata *dd)
+{
+ u64 val;
+ u32 piobufs;
+ int mtu;
+
+ dd->palign = qib_read_kreg32(dd, kr_pagealign);
+
+ dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
+
+ dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
+ dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
+ dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
+ dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
+ dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
+
+ val = qib_read_kreg64(dd, kr_sendpiobufcnt);
+ dd->piobcnt2k = val & ~0U;
+ dd->piobcnt4k = val >> 32;
+ val = qib_read_kreg64(dd, kr_sendpiosize);
+ dd->piosize2k = val & ~0U;
+ dd->piosize4k = val >> 32;
+
+ mtu = ib_mtu_enum_to_int(qib_ibmtu);
+ if (mtu == -1)
+ mtu = QIB_DEFAULT_MTU;
+ dd->pport[0].ibmtu = (u32)mtu;
+ dd->pport[1].ibmtu = (u32)mtu;
+
+ /* these may be adjusted in init_chip_wc_pat() */
+ dd->pio2kbase = (u32 __iomem *)
+ ((char __iomem *) dd->kregbase + dd->pio2k_bufbase);
+ dd->pio4kbase = (u32 __iomem *)
+ ((char __iomem *) dd->kregbase +
+ (dd->piobufbase >> 32));
+ /*
+ * 4K buffers take 2 pages; we use roundup just to be
+ * paranoid; we calculate it once here, rather than on
+ * ever buf allocate
+ */
+ dd->align4k = ALIGN(dd->piosize4k, dd->palign);
+
+ piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS;
+
+ dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
+ (sizeof(u64) * BITS_PER_BYTE / 2);
+}
+
+/*
+ * The chip base addresses in cspec and cpspec have to be set
+ * after possible init_chip_wc_pat(), rather than in
+ * get_7322_chip_params(), so split out as separate function
+ */
+static void qib_7322_set_baseaddrs(struct qib_devdata *dd)
+{
+ u32 cregbase;
+ cregbase = qib_read_kreg32(dd, kr_counterregbase);
+
+ dd->cspec->cregbase = (u64 __iomem *)(cregbase +
+ (char __iomem *)dd->kregbase);
+
+ dd->egrtidbase = (u64 __iomem *)
+ ((char __iomem *) dd->kregbase + dd->rcvegrbase);
+
+ /* port registers are defined as relative to base of chip */
+ dd->pport[0].cpspec->kpregbase =
+ (u64 __iomem *)((char __iomem *)dd->kregbase);
+ dd->pport[1].cpspec->kpregbase =
+ (u64 __iomem *)(dd->palign +
+ (char __iomem *)dd->kregbase);
+ dd->pport[0].cpspec->cpregbase =
+ (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0],
+ kr_counterregbase) + (char __iomem *)dd->kregbase);
+ dd->pport[1].cpspec->cpregbase =
+ (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1],
+ kr_counterregbase) + (char __iomem *)dd->kregbase);
+}
+
+/*
+ * This is a fairly special-purpose observer, so we only support
+ * the port-specific parts of SendCtrl
+ */
+
+#define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \
+ SYM_MASK(SendCtrl_0, SDmaEnable) | \
+ SYM_MASK(SendCtrl_0, SDmaIntEnable) | \
+ SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \
+ SYM_MASK(SendCtrl_0, SDmaHalt) | \
+ SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \
+ SYM_MASK(SendCtrl_0, ForceCreditUpToDate))
+
+static int sendctrl_hook(struct qib_devdata *dd,
+ const struct diag_observer *op, u32 offs,
+ u64 *data, u64 mask, int only_32)
+{
+ unsigned long flags;
+ unsigned idx;
+ unsigned pidx;
+ struct qib_pportdata *ppd = NULL;
+ u64 local_data, all_bits;
+
+ /*
+ * The fixed correspondence between Physical ports and pports is
+ * severed. We need to hunt for the ppd that corresponds
+ * to the offset we got. And we have to do that without admitting
+ * we know the stride, apparently.
+ */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ u64 __iomem *psptr;
+ u32 psoffs;
+
+ ppd = dd->pport + pidx;
+ if (!ppd->cpspec->kpregbase)
+ continue;
+
+ psptr = ppd->cpspec->kpregbase + krp_sendctrl;
+ psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr);
+ if (psoffs == offs)
+ break;
+ }
+
+ /* If pport is not being managed by driver, just avoid shadows. */
+ if (pidx >= dd->num_pports)
+ ppd = NULL;
+
+ /* In any case, "idx" is flat index in kreg space */
+ idx = offs / sizeof(u64);
+
+ all_bits = ~0ULL;
+ if (only_32)
+ all_bits >>= 32;
+
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ if (!ppd || (mask & all_bits) != all_bits) {
+ /*
+ * At least some mask bits are zero, so we need
+ * to read. The judgement call is whether from
+ * reg or shadow. First-cut: read reg, and complain
+ * if any bits which should be shadowed are different
+ * from their shadowed value.
+ */
+ if (only_32)
+ local_data = (u64)qib_read_kreg32(dd, idx);
+ else
+ local_data = qib_read_kreg64(dd, idx);
+ *data = (local_data & ~mask) | (*data & mask);
+ }
+ if (mask) {
+ /*
+ * At least some mask bits are one, so we need
+ * to write, but only shadow some bits.
+ */
+ u64 sval, tval; /* Shadowed, transient */
+
+ /*
+ * New shadow val is bits we don't want to touch,
+ * ORed with bits we do, that are intended for shadow.
+ */
+ if (ppd) {
+ sval = ppd->p_sendctrl & ~mask;
+ sval |= *data & SENDCTRL_SHADOWED & mask;
+ ppd->p_sendctrl = sval;
+ } else
+ sval = *data & SENDCTRL_SHADOWED & mask;
+ tval = sval | (*data & ~SENDCTRL_SHADOWED & mask);
+ qib_write_kreg(dd, idx, tval);
+ qib_write_kreg(dd, kr_scratch, 0Ull);
+ }
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ return only_32 ? 4 : 8;
+}
+
+static const struct diag_observer sendctrl_0_observer = {
+ sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64),
+ KREG_IDX(SendCtrl_0) * sizeof(u64)
+};
+
+static const struct diag_observer sendctrl_1_observer = {
+ sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64),
+ KREG_IDX(SendCtrl_1) * sizeof(u64)
+};
+
+static ushort sdma_fetch_prio = 8;
+module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO);
+MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority");
+
+/* Besides logging QSFP events, we set appropriate TxDDS values */
+static void init_txdds_table(struct qib_pportdata *ppd, int override);
+
+static void qsfp_7322_event(struct work_struct *work)
+{
+ struct qib_qsfp_data *qd;
+ struct qib_pportdata *ppd;
+ u64 pwrup;
+ int ret;
+ u32 le2;
+
+ qd = container_of(work, struct qib_qsfp_data, work);
+ ppd = qd->ppd;
+ pwrup = qd->t_insert + msecs_to_jiffies(QSFP_PWR_LAG_MSEC);
+
+ /*
+ * Some QSFP's not only do not respond until the full power-up
+ * time, but may behave badly if we try. So hold off responding
+ * to insertion.
+ */
+ while (1) {
+ u64 now = get_jiffies_64();
+ if (time_after64(now, pwrup))
+ break;
+ msleep(1);
+ }
+ ret = qib_refresh_qsfp_cache(ppd, &qd->cache);
+ /*
+ * Need to change LE2 back to defaults if we couldn't
+ * read the cable type (to handle cable swaps), so do this
+ * even on failure to read cable information. We don't
+ * get here for QME, so IS_QME check not needed here.
+ */
+ le2 = (!ret && qd->cache.atten[1] >= qib_long_atten &&
+ !ppd->dd->cspec->r1 && QSFP_IS_CU(qd->cache.tech)) ?
+ LE2_5m : LE2_DEFAULT;
+ ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7));
+ init_txdds_table(ppd, 0);
+}
+
+/*
+ * There is little we can do but complain to the user if QSFP
+ * initialization fails.
+ */
+static void qib_init_7322_qsfp(struct qib_pportdata *ppd)
+{
+ unsigned long flags;
+ struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data;
+ struct qib_devdata *dd = ppd->dd;
+ u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N;
+
+ mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx);
+ qd->ppd = ppd;
+ qib_qsfp_init(qd, qsfp_7322_event);
+ spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+ dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert));
+ dd->cspec->gpio_mask |= mod_prs_bit;
+ qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
+ qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
+ spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+}
+
+/*
+ * called at device initialization time, and also if the txselect
+ * module parameter is changed. This is used for cables that don't
+ * have valid QSFP EEPROMs (not present, or attenuation is zero).
+ * We initialize to the default, then if there is a specific
+ * unit,port match, we use that (and set it immediately, for the
+ * current speed, if the link is at INIT or better).
+ * String format is "default# unit#,port#=# ... u,p=#", separators must
+ * be a SPACE character. A newline terminates. The u,p=# tuples may
+ * optionally have "u,p=#,#", where the final # is the H1 value
+ * The last specific match is used (actually, all are used, but last
+ * one is the one that winds up set); if none at all, fall back on default.
+ */
+static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
+{
+ char *nxt, *str;
+ u32 pidx, unit, port, deflt, h1;
+ unsigned long val;
+ int any = 0, seth1;
+
+ str = txselect_list;
+
+ /* default number is validated in setup_txselect() */
+ deflt = simple_strtoul(str, &nxt, 0);
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ dd->pport[pidx].cpspec->no_eep = deflt;
+
+ while (*nxt && nxt[1]) {
+ str = ++nxt;
+ unit = simple_strtoul(str, &nxt, 0);
+ if (nxt == str || !*nxt || *nxt != ',') {
+ while (*nxt && *nxt++ != ' ') /* skip to next, if any */
+ ;
+ continue;
+ }
+ str = ++nxt;
+ port = simple_strtoul(str, &nxt, 0);
+ if (nxt == str || *nxt != '=') {
+ while (*nxt && *nxt++ != ' ') /* skip to next, if any */
+ ;
+ continue;
+ }
+ str = ++nxt;
+ val = simple_strtoul(str, &nxt, 0);
+ if (nxt == str) {
+ while (*nxt && *nxt++ != ' ') /* skip to next, if any */
+ ;
+ continue;
+ }
+ if (val >= TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)
+ continue;
+ seth1 = 0;
+ h1 = 0; /* gcc thinks it might be used uninitted */
+ if (*nxt == ',' && nxt[1]) {
+ str = ++nxt;
+ h1 = (u32)simple_strtoul(str, &nxt, 0);
+ if (nxt == str)
+ while (*nxt && *nxt++ != ' ') /* skip */
+ ;
+ else
+ seth1 = 1;
+ }
+ for (pidx = 0; dd->unit == unit && pidx < dd->num_pports;
+ ++pidx) {
+ struct qib_pportdata *ppd = &dd->pport[pidx];
+
+ if (ppd->port != port || !ppd->link_speed_supported)
+ continue;
+ ppd->cpspec->no_eep = val;
+ /* now change the IBC and serdes, overriding generic */
+ init_txdds_table(ppd, 1);
+ any++;
+ }
+ if (*nxt == '\n')
+ break; /* done */
+ }
+ if (change && !any) {
+ /* no specific setting, use the default.
+ * Change the IBC and serdes, but since it's
+ * general, don't override specific settings.
+ */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].link_speed_supported)
+ init_txdds_table(&dd->pport[pidx], 0);
+ }
+}
+
+/* handle the txselect parameter changing */
+static int setup_txselect(const char *str, struct kernel_param *kp)
+{
+ struct qib_devdata *dd;
+ unsigned long val;
+ char *n;
+ if (strlen(str) >= MAX_ATTEN_LEN) {
+ printk(KERN_INFO QIB_DRV_NAME " txselect_values string "
+ "too long\n");
+ return -ENOSPC;
+ }
+ val = simple_strtoul(str, &n, 0);
+ if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
+ printk(KERN_INFO QIB_DRV_NAME
+ "txselect_values must start with a number < %d\n",
+ TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ);
+ return -EINVAL;
+ }
+ strcpy(txselect_list, str);
+
+ list_for_each_entry(dd, &qib_dev_list, list)
+ if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322)
+ set_no_qsfp_atten(dd, 1);
+ return 0;
+}
+
+/*
+ * Write the final few registers that depend on some of the
+ * init setup. Done late in init, just before bringing up
+ * the serdes.
+ */
+static int qib_late_7322_initreg(struct qib_devdata *dd)
+{
+ int ret = 0, n;
+ u64 val;
+
+ qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
+ qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
+ qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
+ qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
+ val = qib_read_kreg64(dd, kr_sendpioavailaddr);
+ if (val != dd->pioavailregs_phys) {
+ qib_dev_err(dd, "Catastrophic software error, "
+ "SendPIOAvailAddr written as %lx, "
+ "read back as %llx\n",
+ (unsigned long) dd->pioavailregs_phys,
+ (unsigned long long) val);
+ ret = -EINVAL;
+ }
+
+ n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
+ qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL);
+ /* driver sends get pkey, lid, etc. checking also, to catch bugs */
+ qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL);
+
+ qib_register_observer(dd, &sendctrl_0_observer);
+ qib_register_observer(dd, &sendctrl_1_observer);
+
+ dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN;
+ qib_write_kreg(dd, kr_control, dd->control);
+ /*
+ * Set SendDmaFetchPriority and init Tx params, including
+ * QSFP handler on boards that have QSFP.
+ * First set our default attenuation entry for cables that
+ * don't have valid attenuation.
+ */
+ set_no_qsfp_atten(dd, 0);
+ for (n = 0; n < dd->num_pports; ++n) {
+ struct qib_pportdata *ppd = dd->pport + n;
+
+ qib_write_kreg_port(ppd, krp_senddmaprioritythld,
+ sdma_fetch_prio & 0xf);
+ /* Initialize qsfp if present on board. */
+ if (dd->flags & QIB_HAS_QSFP)
+ qib_init_7322_qsfp(ppd);
+ }
+ dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN;
+ qib_write_kreg(dd, kr_control, dd->control);
+
+ return ret;
+}
+
+/* per IB port errors. */
+#define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \
+ MASK_ACROSS(8, 15))
+#define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41))
+#define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \
+ MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \
+ MASK_ACROSS(0, 11))
+
+/*
+ * Write the initialization per-port registers that need to be done at
+ * driver load and after reset completes (i.e., that aren't done as part
+ * of other init procedures called from qib_init.c).
+ * Some of these should be redundant on reset, but play safe.
+ */
+static void write_7322_init_portregs(struct qib_pportdata *ppd)
+{
+ u64 val;
+ int i;
+
+ if (!ppd->link_speed_supported) {
+ /* no buffer credits for this port */
+ for (i = 1; i < 8; i++)
+ qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0);
+ qib_write_kreg_port(ppd, krp_ibcctrl_b, 0);
+ qib_write_kreg(ppd->dd, kr_scratch, 0);
+ return;
+ }
+
+ /*
+ * Set the number of supported virtual lanes in IBC,
+ * for flow control packet handling on unsupported VLs
+ */
+ val = qib_read_kreg_port(ppd, krp_ibsdtestiftx);
+ val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP);
+ val |= (u64)(ppd->vls_supported - 1) <<
+ SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP);
+ qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
+
+ qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP);
+
+ /* enable tx header checking */
+ qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY |
+ IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID |
+ IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ);
+
+ qib_write_kreg_port(ppd, krp_ncmodectrl,
+ SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal));
+
+ /*
+ * Unconditionally clear the bufmask bits. If SDMA is
+ * enabled, we'll set them appropriately later.
+ */
+ qib_write_kreg_port(ppd, krp_senddmabufmask0, 0);
+ qib_write_kreg_port(ppd, krp_senddmabufmask1, 0);
+ qib_write_kreg_port(ppd, krp_senddmabufmask2, 0);
+ if (ppd->dd->cspec->r1)
+ ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate);
+}
+
+/*
+ * Write the initialization per-device registers that need to be done at
+ * driver load and after reset completes (i.e., that aren't done as part
+ * of other init procedures called from qib_init.c). Also write per-port
+ * registers that are affected by overall device config, such as QP mapping
+ * Some of these should be redundant on reset, but play safe.
+ */
+static void write_7322_initregs(struct qib_devdata *dd)
+{
+ struct qib_pportdata *ppd;
+ int i, pidx;
+ u64 val;
+
+ /* Set Multicast QPs received by port 2 to map to context one. */
+ qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1);
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ unsigned n, regno;
+ unsigned long flags;
+
+ if (!dd->qpn_mask || !dd->pport[pidx].link_speed_supported)
+ continue;
+
+ ppd = &dd->pport[pidx];
+
+ /* be paranoid against later code motion, etc. */
+ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+ ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable);
+ spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+
+ /* Initialize QP to context mapping */
+ regno = krp_rcvqpmaptable;
+ val = 0;
+ if (dd->num_pports > 1)
+ n = dd->first_user_ctxt / dd->num_pports;
+ else
+ n = dd->first_user_ctxt - 1;
+ for (i = 0; i < 32; ) {
+ unsigned ctxt;
+
+ if (dd->num_pports > 1)
+ ctxt = (i % n) * dd->num_pports + pidx;
+ else if (i % n)
+ ctxt = (i % n) + 1;
+ else
+ ctxt = ppd->hw_pidx;
+ val |= ctxt << (5 * (i % 6));
+ i++;
+ if (i % 6 == 0) {
+ qib_write_kreg_port(ppd, regno, val);
+ val = 0;
+ regno++;
+ }
+ }
+ qib_write_kreg_port(ppd, regno, val);
+ }
+
+ /*
+ * Setup up interrupt mitigation for kernel contexts, but
+ * not user contexts (user contexts use interrupts when
+ * stalled waiting for any packet, so want those interrupts
+ * right away).
+ */
+ for (i = 0; i < dd->first_user_ctxt; i++) {
+ dd->cspec->rcvavail_timeout[i] = rcv_int_timeout;
+ qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout);
+ }
+
+ /*
+ * Initialize as (disabled) rcvflow tables. Application code
+ * will setup each flow as it uses the flow.
+ * Doesn't clear any of the error bits that might be set.
+ */
+ val = TIDFLOW_ERRBITS; /* these are W1C */
+ for (i = 0; i < dd->ctxtcnt; i++) {
+ int flow;
+ for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++)
+ qib_write_ureg(dd, ur_rcvflowtable+flow, val, i);
+ }
+
+ /*
+ * dual cards init to dual port recovery, single port cards to
+ * the one port. Dual port cards may later adjust to 1 port,
+ * and then back to dual port if both ports are connected
+ * */
+ if (dd->num_pports)
+ setup_7322_link_recovery(dd->pport, dd->num_pports > 1);
+}
+
+static int qib_init_7322_variables(struct qib_devdata *dd)
+{
+ struct qib_pportdata *ppd;
+ unsigned features, pidx, sbufcnt;
+ int ret, mtu;
+ u32 sbufs, updthresh;
+
+ /* pport structs are contiguous, allocated after devdata */
+ ppd = (struct qib_pportdata *)(dd + 1);
+ dd->pport = ppd;
+ ppd[0].dd = dd;
+ ppd[1].dd = dd;
+
+ dd->cspec = (struct qib_chip_specific *)(ppd + 2);
+
+ ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1);
+ ppd[1].cpspec = &ppd[0].cpspec[1];
+ ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */
+ ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */
+
+ spin_lock_init(&dd->cspec->rcvmod_lock);
+ spin_lock_init(&dd->cspec->gpio_lock);
+
+ /* we haven't yet set QIB_PRESENT, so use read directly */
+ dd->revision = readq(&dd->kregbase[kr_revision]);
+
+ if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
+ qib_dev_err(dd, "Revision register read failure, "
+ "giving up initialization\n");
+ ret = -ENODEV;
+ goto bail;
+ }
+ dd->flags |= QIB_PRESENT; /* now register routines work */
+
+ dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor);
+ dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor);
+ dd->cspec->r1 = dd->minrev == 1;
+
+ get_7322_chip_params(dd);
+ features = qib_7322_boardname(dd);
+
+ /* now that piobcnt2k and 4k set, we can allocate these */
+ sbufcnt = dd->piobcnt2k + dd->piobcnt4k +
+ NUM_VL15_BUFS + BITS_PER_LONG - 1;
+ sbufcnt /= BITS_PER_LONG;
+ dd->cspec->sendchkenable = kmalloc(sbufcnt *
+ sizeof(*dd->cspec->sendchkenable), GFP_KERNEL);
+ dd->cspec->sendgrhchk = kmalloc(sbufcnt *
+ sizeof(*dd->cspec->sendgrhchk), GFP_KERNEL);
+ dd->cspec->sendibchk = kmalloc(sbufcnt *
+ sizeof(*dd->cspec->sendibchk), GFP_KERNEL);
+ if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk ||
+ !dd->cspec->sendibchk) {
+ qib_dev_err(dd, "Failed allocation for hdrchk bitmaps\n");
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ ppd = dd->pport;
+
+ /*
+ * GPIO bits for TWSI data and clock,
+ * used for serial EEPROM.
+ */
+ dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
+ dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
+ dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV;
+
+ dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY |
+ QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP |
+ QIB_HAS_THRESH_UPDATE |
+ (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0);
+ dd->flags |= qib_special_trigger ?
+ QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA;
+
+ /*
+ * Setup initial values. These may change when PAT is enabled, but
+ * we need these to do initial chip register accesses.
+ */
+ qib_7322_set_baseaddrs(dd);
+
+ mtu = ib_mtu_enum_to_int(qib_ibmtu);
+ if (mtu == -1)
+ mtu = QIB_DEFAULT_MTU;
+
+ dd->cspec->int_enable_mask = QIB_I_BITSEXTANT;
+ /* all hwerrors become interrupts, unless special purposed */
+ dd->cspec->hwerrmask = ~0ULL;
+ /* link_recovery setup causes these errors, so ignore them,
+ * other than clearing them when they occur */
+ dd->cspec->hwerrmask &=
+ ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) |
+ SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) |
+ HWE_MASK(LATriggered));
+
+ for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) {
+ struct qib_chippport_specific *cp = ppd->cpspec;
+ ppd->link_speed_supported = features & PORT_SPD_CAP;
+ features >>= PORT_SPD_CAP_SHIFT;
+ if (!ppd->link_speed_supported) {
+ /* single port mode (7340, or configured) */
+ dd->skip_kctxt_mask |= 1 << pidx;
+ if (pidx == 0) {
+ /* Make sure port is disabled. */
+ qib_write_kreg_port(ppd, krp_rcvctrl, 0);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, 0);
+ ppd[0] = ppd[1];
+ dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask,
+ IBSerdesPClkNotDetectMask_0)
+ | SYM_MASK(HwErrMask,
+ SDmaMemReadErrMask_0));
+ dd->cspec->int_enable_mask &= ~(
+ SYM_MASK(IntMask, SDmaCleanupDoneMask_0) |
+ SYM_MASK(IntMask, SDmaIdleIntMask_0) |
+ SYM_MASK(IntMask, SDmaProgressIntMask_0) |
+ SYM_MASK(IntMask, SDmaIntMask_0) |
+ SYM_MASK(IntMask, ErrIntMask_0) |
+ SYM_MASK(IntMask, SendDoneIntMask_0));
+ } else {
+ /* Make sure port is disabled. */
+ qib_write_kreg_port(ppd, krp_rcvctrl, 0);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a, 0);
+ dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask,
+ IBSerdesPClkNotDetectMask_1)
+ | SYM_MASK(HwErrMask,
+ SDmaMemReadErrMask_1));
+ dd->cspec->int_enable_mask &= ~(
+ SYM_MASK(IntMask, SDmaCleanupDoneMask_1) |
+ SYM_MASK(IntMask, SDmaIdleIntMask_1) |
+ SYM_MASK(IntMask, SDmaProgressIntMask_1) |
+ SYM_MASK(IntMask, SDmaIntMask_1) |
+ SYM_MASK(IntMask, ErrIntMask_1) |
+ SYM_MASK(IntMask, SendDoneIntMask_1));
+ }
+ continue;
+ }
+
+ dd->num_pports++;
+ qib_init_pportdata(ppd, dd, pidx, dd->num_pports);
+
+ ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+ ppd->link_width_enabled = IB_WIDTH_4X;
+ ppd->link_speed_enabled = ppd->link_speed_supported;
+ /*
+ * Set the initial values to reasonable default, will be set
+ * for real when link is up.
+ */
+ ppd->link_width_active = IB_WIDTH_4X;
+ ppd->link_speed_active = QIB_IB_SDR;
+ ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS];
+ switch (qib_num_cfg_vls) {
+ case 1:
+ ppd->vls_supported = IB_VL_VL0;
+ break;
+ case 2:
+ ppd->vls_supported = IB_VL_VL0_1;
+ break;
+ default:
+ qib_devinfo(dd->pcidev,
+ "Invalid num_vls %u, using 4 VLs\n",
+ qib_num_cfg_vls);
+ qib_num_cfg_vls = 4;
+ /* fall through */
+ case 4:
+ ppd->vls_supported = IB_VL_VL0_3;
+ break;
+ case 8:
+ if (mtu <= 2048)
+ ppd->vls_supported = IB_VL_VL0_7;
+ else {
+ qib_devinfo(dd->pcidev,
+ "Invalid num_vls %u for MTU %d "
+ ", using 4 VLs\n",
+ qib_num_cfg_vls, mtu);
+ ppd->vls_supported = IB_VL_VL0_3;
+ qib_num_cfg_vls = 4;
+ }
+ break;
+ }
+ ppd->vls_operational = ppd->vls_supported;
+
+ init_waitqueue_head(&cp->autoneg_wait);
+ INIT_DELAYED_WORK(&cp->autoneg_work,
+ autoneg_7322_work);
+ if (ppd->dd->cspec->r1)
+ INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work);
+
+ /*
+ * For Mez and similar cards, no qsfp info, so do
+ * the "cable info" setup here. Can be overridden
+ * in adapter-specific routines.
+ */
+ if (!(ppd->dd->flags & QIB_HAS_QSFP)) {
+ if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd))
+ qib_devinfo(ppd->dd->pcidev, "IB%u:%u: "
+ "Unknown mezzanine card type\n",
+ dd->unit, ppd->port);
+ cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
+ /*
+ * Choose center value as default tx serdes setting
+ * until changed through module parameter.
+ */
+ ppd->cpspec->no_eep = IS_QMH(dd) ?
+ TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4;
+ } else
+ cp->h1_val = H1_FORCE_VAL;
+
+ /* Avoid writes to chip for mini_init */
+ if (!qib_mini_init)
+ write_7322_init_portregs(ppd);
+
+ init_timer(&cp->chase_timer);
+ cp->chase_timer.function = reenable_chase;
+ cp->chase_timer.data = (unsigned long)ppd;
+
+ ppd++;
+ }
+
+ dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
+ dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
+ dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
+
+ /* we always allocate at least 2048 bytes for eager buffers */
+ dd->rcvegrbufsize = max(mtu, 2048);
+
+ qib_7322_tidtemplate(dd);
+
+ /*
+ * We can request a receive interrupt for 1 or
+ * more packets from current offset.
+ */
+ dd->rhdrhead_intr_off =
+ (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT;
+
+ /* setup the stats timer; the add_timer is done at end of init */
+ init_timer(&dd->stats_timer);
+ dd->stats_timer.function = qib_get_7322_faststats;
+ dd->stats_timer.data = (unsigned long) dd;
+
+ dd->ureg_align = 0x10000; /* 64KB alignment */
+
+ dd->piosize2kmax_dwords = dd->piosize2k >> 2;
+
+ qib_7322_config_ctxts(dd);
+ qib_set_ctxtcnt(dd);
+
+ if (qib_wc_pat) {
+ ret = init_chip_wc_pat(dd, NUM_VL15_BUFS * dd->align4k);
+ if (ret)
+ goto bail;
+ }
+ qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
+
+ ret = 0;
+ if (qib_mini_init)
+ goto bail;
+ if (!dd->num_pports) {
+ qib_dev_err(dd, "No ports enabled, giving up initialization\n");
+ goto bail; /* no error, so can still figure out why err */
+ }
+
+ write_7322_initregs(dd);
+ ret = qib_create_ctxts(dd);
+ init_7322_cntrnames(dd);
+
+ updthresh = 8U; /* update threshold */
+
+ /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA.
+ * reserve the update threshold amount for other kernel use, such
+ * as sending SMI, MAD, and ACKs, or 3, whichever is greater,
+ * unless we aren't enabling SDMA, in which case we want to use
+ * all the 4k bufs for the kernel.
+ * if this was less than the update threshold, we could wait
+ * a long time for an update. Coded this way because we
+ * sometimes change the update threshold for various reasons,
+ * and we want this to remain robust.
+ */
+ if (dd->flags & QIB_HAS_SEND_DMA) {
+ dd->cspec->sdmabufcnt = dd->piobcnt4k;
+ sbufs = updthresh > 3 ? updthresh : 3;
+ } else {
+ dd->cspec->sdmabufcnt = 0;
+ sbufs = dd->piobcnt4k;
+ }
+ dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k -
+ dd->cspec->sdmabufcnt;
+ dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs;
+ dd->cspec->lastbuf_for_pio--; /* range is <= , not < */
+ dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ?
+ dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0;
+
+ /*
+ * If we have 16 user contexts, we will have 7 sbufs
+ * per context, so reduce the update threshold to match. We
+ * want to update before we actually run out, at low pbufs/ctxt
+ * so give ourselves some margin.
+ */
+ if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh)
+ updthresh = dd->pbufsctxt - 2;
+ dd->cspec->updthresh_dflt = updthresh;
+ dd->cspec->updthresh = updthresh;
+
+ /* before full enable, no interrupts, no locking needed */
+ dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld))
+ << SYM_LSB(SendCtrl, AvailUpdThld)) |
+ SYM_MASK(SendCtrl, SendBufAvailPad64Byte);
+
+ dd->psxmitwait_supported = 1;
+ dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE;
+bail:
+ if (!dd->ctxtcnt)
+ dd->ctxtcnt = 1; /* for other initialization code */
+
+ return ret;
+}
+
+static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
+ u32 *pbufnum)
+{
+ u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
+ struct qib_devdata *dd = ppd->dd;
+
+ /* last is same for 2k and 4k, because we use 4k if all 2k busy */
+ if (pbc & PBC_7322_VL15_SEND) {
+ first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx;
+ last = first;
+ } else {
+ if ((plen + 1) > dd->piosize2kmax_dwords)
+ first = dd->piobcnt2k;
+ else
+ first = 0;
+ last = dd->cspec->lastbuf_for_pio;
+ }
+ return qib_getsendbuf_range(dd, pbufnum, first, last);
+}
+
+static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv,
+ u32 start)
+{
+ qib_write_kreg_port(ppd, krp_psinterval, intv);
+ qib_write_kreg_port(ppd, krp_psstart, start);
+}
+
+/*
+ * Must be called with sdma_lock held, or before init finished.
+ */
+static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
+{
+ qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt);
+}
+
+static struct sdma_set_state_action sdma_7322_action_table[] = {
+ [qib_sdma_state_s00_hw_down] = {
+ .go_s99_running_tofalse = 1,
+ .op_enable = 0,
+ .op_intenable = 0,
+ .op_halt = 0,
+ .op_drain = 0,
+ },
+ [qib_sdma_state_s10_hw_start_up_wait] = {
+ .op_enable = 0,
+ .op_intenable = 1,
+ .op_halt = 1,
+ .op_drain = 0,
+ },
+ [qib_sdma_state_s20_idle] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ .op_drain = 0,
+ },
+ [qib_sdma_state_s30_sw_clean_up_wait] = {
+ .op_enable = 0,
+ .op_intenable = 1,
+ .op_halt = 1,
+ .op_drain = 0,
+ },
+ [qib_sdma_state_s40_hw_clean_up_wait] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ .op_drain = 0,
+ },
+ [qib_sdma_state_s50_hw_halt_wait] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ .op_drain = 1,
+ },
+ [qib_sdma_state_s99_running] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 0,
+ .op_drain = 0,
+ .go_s99_running_totrue = 1,
+ },
+};
+
+static void qib_7322_sdma_init_early(struct qib_pportdata *ppd)
+{
+ ppd->sdma_state.set_state_action = sdma_7322_action_table;
+}
+
+static int init_sdma_7322_regs(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ unsigned lastbuf, erstbuf;
+ u64 senddmabufmask[3] = { 0 };
+ int n, ret = 0;
+
+ qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys);
+ qib_sdma_7322_setlengen(ppd);
+ qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */
+ qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt);
+ qib_write_kreg_port(ppd, krp_senddmadesccnt, 0);
+ qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys);
+
+ if (dd->num_pports)
+ n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */
+ else
+ n = dd->cspec->sdmabufcnt; /* failsafe for init */
+ erstbuf = (dd->piobcnt2k + dd->piobcnt4k) -
+ ((dd->num_pports == 1 || ppd->port == 2) ? n :
+ dd->cspec->sdmabufcnt);
+ lastbuf = erstbuf + n;
+
+ ppd->sdma_state.first_sendbuf = erstbuf;
+ ppd->sdma_state.last_sendbuf = lastbuf;
+ for (; erstbuf < lastbuf; ++erstbuf) {
+ unsigned word = erstbuf / BITS_PER_LONG;
+ unsigned bit = erstbuf & (BITS_PER_LONG - 1);
+
+ BUG_ON(word >= 3);
+ senddmabufmask[word] |= 1ULL << bit;
+ }
+ qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]);
+ qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]);
+ qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]);
+ return ret;
+}
+
+/* sdma_lock must be held */
+static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ int sane;
+ int use_dmahead;
+ u16 swhead;
+ u16 swtail;
+ u16 cnt;
+ u16 hwhead;
+
+ use_dmahead = __qib_sdma_running(ppd) &&
+ (dd->flags & QIB_HAS_SDMA_TIMEOUT);
+retry:
+ hwhead = use_dmahead ?
+ (u16) le64_to_cpu(*ppd->sdma_head_dma) :
+ (u16) qib_read_kreg_port(ppd, krp_senddmahead);
+
+ swhead = ppd->sdma_descq_head;
+ swtail = ppd->sdma_descq_tail;
+ cnt = ppd->sdma_descq_cnt;
+
+ if (swhead < swtail)
+ /* not wrapped */
+ sane = (hwhead >= swhead) & (hwhead <= swtail);
+ else if (swhead > swtail)
+ /* wrapped around */
+ sane = ((hwhead >= swhead) && (hwhead < cnt)) ||
+ (hwhead <= swtail);
+ else
+ /* empty */
+ sane = (hwhead == swhead);
+
+ if (unlikely(!sane)) {
+ if (use_dmahead) {
+ /* try one more time, directly from the register */
+ use_dmahead = 0;
+ goto retry;
+ }
+ /* proceed as if no progress */
+ hwhead = swhead;
+ }
+
+ return hwhead;
+}
+
+static int qib_sdma_7322_busy(struct qib_pportdata *ppd)
+{
+ u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus);
+
+ return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) ||
+ (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) ||
+ !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) ||
+ !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty));
+}
+
+/*
+ * Compute the amount of delay before sending the next packet if the
+ * port's send rate differs from the static rate set for the QP.
+ * The delay affects the next packet and the amount of the delay is
+ * based on the length of the this packet.
+ */
+static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen,
+ u8 srate, u8 vl)
+{
+ u8 snd_mult = ppd->delay_mult;
+ u8 rcv_mult = ib_rate_to_delay[srate];
+ u32 ret;
+
+ ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0;
+
+ /* Indicate VL15, else set the VL in the control word */
+ if (vl == 15)
+ ret |= PBC_7322_VL15_SEND_CTRL;
+ else
+ ret |= vl << PBC_VL_NUM_LSB;
+ ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB;
+
+ return ret;
+}
+
+/*
+ * Enable the per-port VL15 send buffers for use.
+ * They follow the rest of the buffers, without a config parameter.
+ * This was in initregs, but that is done before the shadow
+ * is set up, and this has to be done after the shadow is
+ * set up.
+ */
+static void qib_7322_initvl15_bufs(struct qib_devdata *dd)
+{
+ unsigned vl15bufs;
+
+ vl15bufs = dd->piobcnt2k + dd->piobcnt4k;
+ qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS,
+ TXCHK_CHG_TYPE_KERN, NULL);
+}
+
+static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd)
+{
+ if (rcd->ctxt < NUM_IB_PORTS) {
+ if (rcd->dd->num_pports > 1) {
+ rcd->rcvegrcnt = KCTXT0_EGRCNT / 2;
+ rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0;
+ } else {
+ rcd->rcvegrcnt = KCTXT0_EGRCNT;
+ rcd->rcvegr_tid_base = 0;
+ }
+ } else {
+ rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt;
+ rcd->rcvegr_tid_base = KCTXT0_EGRCNT +
+ (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt;
+ }
+}
+
+#define QTXSLEEPS 5000
+static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start,
+ u32 len, u32 which, struct qib_ctxtdata *rcd)
+{
+ int i;
+ const int last = start + len - 1;
+ const int lastr = last / BITS_PER_LONG;
+ u32 sleeps = 0;
+ int wait = rcd != NULL;
+ unsigned long flags;
+
+ while (wait) {
+ unsigned long shadow;
+ int cstart, previ = -1;
+
+ /*
+ * when flipping from kernel to user, we can't change
+ * the checking type if the buffer is allocated to the
+ * driver. It's OK the other direction, because it's
+ * from close, and we have just disarm'ed all the
+ * buffers. All the kernel to kernel changes are also
+ * OK.
+ */
+ for (cstart = start; cstart <= last; cstart++) {
+ i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT)
+ / BITS_PER_LONG;
+ if (i != previ) {
+ shadow = (unsigned long)
+ le64_to_cpu(dd->pioavailregs_dma[i]);
+ previ = i;
+ }
+ if (test_bit(((2 * cstart) +
+ QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT)
+ % BITS_PER_LONG, &shadow))
+ break;
+ }
+
+ if (cstart > last)
+ break;
+
+ if (sleeps == QTXSLEEPS)
+ break;
+ /* make sure we see an updated copy next time around */
+ sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+ sleeps++;
+ msleep(1);
+ }
+
+ switch (which) {
+ case TXCHK_CHG_TYPE_DIS1:
+ /*
+ * disable checking on a range; used by diags; just
+ * one buffer, but still written generically
+ */
+ for (i = start; i <= last; i++)
+ clear_bit(i, dd->cspec->sendchkenable);
+ break;
+
+ case TXCHK_CHG_TYPE_ENAB1:
+ /*
+ * (re)enable checking on a range; used by diags; just
+ * one buffer, but still written generically; read
+ * scratch to be sure buffer actually triggered, not
+ * just flushed from processor.
+ */
+ qib_read_kreg32(dd, kr_scratch);
+ for (i = start; i <= last; i++)
+ set_bit(i, dd->cspec->sendchkenable);
+ break;
+
+ case TXCHK_CHG_TYPE_KERN:
+ /* usable by kernel */
+ for (i = start; i <= last; i++) {
+ set_bit(i, dd->cspec->sendibchk);
+ clear_bit(i, dd->cspec->sendgrhchk);
+ }
+ spin_lock_irqsave(&dd->uctxt_lock, flags);
+ /* see if we need to raise avail update threshold */
+ for (i = dd->first_user_ctxt;
+ dd->cspec->updthresh != dd->cspec->updthresh_dflt
+ && i < dd->cfgctxts; i++)
+ if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt &&
+ ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1)
+ < dd->cspec->updthresh_dflt)
+ break;
+ spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+ if (i == dd->cfgctxts) {
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ dd->cspec->updthresh = dd->cspec->updthresh_dflt;
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
+ dd->sendctrl |= (dd->cspec->updthresh &
+ SYM_RMASK(SendCtrl, AvailUpdThld)) <<
+ SYM_LSB(SendCtrl, AvailUpdThld);
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+ }
+ break;
+
+ case TXCHK_CHG_TYPE_USER:
+ /* for user process */
+ for (i = start; i <= last; i++) {
+ clear_bit(i, dd->cspec->sendibchk);
+ set_bit(i, dd->cspec->sendgrhchk);
+ }
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ if (rcd && rcd->subctxt_cnt && ((rcd->piocnt
+ / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) {
+ dd->cspec->updthresh = (rcd->piocnt /
+ rcd->subctxt_cnt) - 1;
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
+ dd->sendctrl |= (dd->cspec->updthresh &
+ SYM_RMASK(SendCtrl, AvailUpdThld))
+ << SYM_LSB(SendCtrl, AvailUpdThld);
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+ } else
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ break;
+
+ default:
+ break;
+ }
+
+ for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i)
+ qib_write_kreg(dd, kr_sendcheckmask + i,
+ dd->cspec->sendchkenable[i]);
+
+ for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) {
+ qib_write_kreg(dd, kr_sendgrhcheckmask + i,
+ dd->cspec->sendgrhchk[i]);
+ qib_write_kreg(dd, kr_sendibpktmask + i,
+ dd->cspec->sendibchk[i]);
+ }
+
+ /*
+ * Be sure whatever we did was seen by the chip and acted upon,
+ * before we return. Mostly important for which >= 2.
+ */
+ qib_read_kreg32(dd, kr_scratch);
+}
+
+
+/* useful for trigger analyzers, etc. */
+static void writescratch(struct qib_devdata *dd, u32 val)
+{
+ qib_write_kreg(dd, kr_scratch, val);
+}
+
+/* Dummy for now, use chip regs soon */
+static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum)
+{
+ return -ENXIO;
+}
+
+/**
+ * qib_init_iba7322_funcs - set up the chip-specific function pointers
+ * @dev: the pci_dev for qlogic_ib device
+ * @ent: pci_device_id struct for this dev
+ *
+ * Also allocates, inits, and returns the devdata struct for this
+ * device instance
+ *
+ * This is global, and is called directly at init to set up the
+ * chip-specific function pointers for later use.
+ */
+struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct qib_devdata *dd;
+ int ret, i;
+ u32 tabsize, actual_cnt = 0;
+
+ dd = qib_alloc_devdata(pdev,
+ NUM_IB_PORTS * sizeof(struct qib_pportdata) +
+ sizeof(struct qib_chip_specific) +
+ NUM_IB_PORTS * sizeof(struct qib_chippport_specific));
+ if (IS_ERR(dd))
+ goto bail;
+
+ dd->f_bringup_serdes = qib_7322_bringup_serdes;
+ dd->f_cleanup = qib_setup_7322_cleanup;
+ dd->f_clear_tids = qib_7322_clear_tids;
+ dd->f_free_irq = qib_7322_free_irq;
+ dd->f_get_base_info = qib_7322_get_base_info;
+ dd->f_get_msgheader = qib_7322_get_msgheader;
+ dd->f_getsendbuf = qib_7322_getsendbuf;
+ dd->f_gpio_mod = gpio_7322_mod;
+ dd->f_eeprom_wen = qib_7322_eeprom_wen;
+ dd->f_hdrqempty = qib_7322_hdrqempty;
+ dd->f_ib_updown = qib_7322_ib_updown;
+ dd->f_init_ctxt = qib_7322_init_ctxt;
+ dd->f_initvl15_bufs = qib_7322_initvl15_bufs;
+ dd->f_intr_fallback = qib_7322_intr_fallback;
+ dd->f_late_initreg = qib_late_7322_initreg;
+ dd->f_setpbc_control = qib_7322_setpbc_control;
+ dd->f_portcntr = qib_portcntr_7322;
+ dd->f_put_tid = qib_7322_put_tid;
+ dd->f_quiet_serdes = qib_7322_mini_quiet_serdes;
+ dd->f_rcvctrl = rcvctrl_7322_mod;
+ dd->f_read_cntrs = qib_read_7322cntrs;
+ dd->f_read_portcntrs = qib_read_7322portcntrs;
+ dd->f_reset = qib_do_7322_reset;
+ dd->f_init_sdma_regs = init_sdma_7322_regs;
+ dd->f_sdma_busy = qib_sdma_7322_busy;
+ dd->f_sdma_gethead = qib_sdma_7322_gethead;
+ dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl;
+ dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt;
+ dd->f_sdma_update_tail = qib_sdma_update_7322_tail;
+ dd->f_sendctrl = sendctrl_7322_mod;
+ dd->f_set_armlaunch = qib_set_7322_armlaunch;
+ dd->f_set_cntr_sample = qib_set_cntr_7322_sample;
+ dd->f_iblink_state = qib_7322_iblink_state;
+ dd->f_ibphys_portstate = qib_7322_phys_portstate;
+ dd->f_get_ib_cfg = qib_7322_get_ib_cfg;
+ dd->f_set_ib_cfg = qib_7322_set_ib_cfg;
+ dd->f_set_ib_loopback = qib_7322_set_loopback;
+ dd->f_get_ib_table = qib_7322_get_ib_table;
+ dd->f_set_ib_table = qib_7322_set_ib_table;
+ dd->f_set_intr_state = qib_7322_set_intr_state;
+ dd->f_setextled = qib_setup_7322_setextled;
+ dd->f_txchk_change = qib_7322_txchk_change;
+ dd->f_update_usrhead = qib_update_7322_usrhead;
+ dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr;
+ dd->f_xgxs_reset = qib_7322_mini_pcs_reset;
+ dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up;
+ dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up;
+ dd->f_sdma_init_early = qib_7322_sdma_init_early;
+ dd->f_writescratch = writescratch;
+ dd->f_tempsense_rd = qib_7322_tempsense_rd;
+ /*
+ * Do remaining PCIe setup and save PCIe values in dd.
+ * Any error printing is already done by the init code.
+ * On return, we have the chip mapped, but chip registers
+ * are not set up until start of qib_init_7322_variables.
+ */
+ ret = qib_pcie_ddinit(dd, pdev, ent);
+ if (ret < 0)
+ goto bail_free;
+
+ /* initialize chip-specific variables */
+ ret = qib_init_7322_variables(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ if (qib_mini_init || !dd->num_pports)
+ goto bail;
+
+ /*
+ * Determine number of vectors we want; depends on port count
+ * and number of configured kernel receive queues actually used.
+ * Should also depend on whether sdma is enabled or not, but
+ * that's such a rare testing case it's not worth worrying about.
+ */
+ tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table);
+ for (i = 0; i < tabsize; i++)
+ if ((i < ARRAY_SIZE(irq_table) &&
+ irq_table[i].port <= dd->num_pports) ||
+ (i >= ARRAY_SIZE(irq_table) &&
+ dd->rcd[i - ARRAY_SIZE(irq_table)]))
+ actual_cnt++;
+ tabsize = actual_cnt;
+ dd->cspec->msix_entries = kmalloc(tabsize *
+ sizeof(struct msix_entry), GFP_KERNEL);
+ dd->cspec->msix_arg = kmalloc(tabsize *
+ sizeof(void *), GFP_KERNEL);
+ if (!dd->cspec->msix_entries || !dd->cspec->msix_arg) {
+ qib_dev_err(dd, "No memory for MSIx table\n");
+ tabsize = 0;
+ }
+ for (i = 0; i < tabsize; i++)
+ dd->cspec->msix_entries[i].entry = i;
+
+ if (qib_pcie_params(dd, 8, &tabsize, dd->cspec->msix_entries))
+ qib_dev_err(dd, "Failed to setup PCIe or interrupts; "
+ "continuing anyway\n");
+ /* may be less than we wanted, if not enough available */
+ dd->cspec->num_msix_entries = tabsize;
+
+ /* setup interrupt handler */
+ qib_setup_7322_interrupt(dd, 1);
+
+ /* clear diagctrl register, in case diags were running and crashed */
+ qib_write_kreg(dd, kr_hwdiagctrl, 0);
+
+ goto bail;
+
+bail_cleanup:
+ qib_pcie_ddcleanup(dd);
+bail_free:
+ qib_free_devdata(dd);
+ dd = ERR_PTR(ret);
+bail:
+ return dd;
+}
+
+/*
+ * Set the table entry at the specified index from the table specifed.
+ * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first
+ * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR.
+ * 'idx' below addresses the correct entry, while its 4 LSBs select the
+ * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table.
+ */
+#define DDS_ENT_AMP_LSB 14
+#define DDS_ENT_MAIN_LSB 9
+#define DDS_ENT_POST_LSB 5
+#define DDS_ENT_PRE_XTRA_LSB 3
+#define DDS_ENT_PRE_LSB 0
+
+/*
+ * Set one entry in the TxDDS table for spec'd port
+ * ridx picks one of the entries, while tp points
+ * to the appropriate table entry.
+ */
+static void set_txdds(struct qib_pportdata *ppd, int ridx,
+ const struct txdds_ent *tp)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u32 pack_ent;
+ int regidx;
+
+ /* Get correct offset in chip-space, and in source table */
+ regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx;
+ /*
+ * We do not use qib_write_kreg_port() because it was intended
+ * only for registers in the lower "port specific" pages.
+ * So do index calculation by hand.
+ */
+ if (ppd->hw_pidx)
+ regidx += (dd->palign / sizeof(u64));
+
+ pack_ent = tp->amp << DDS_ENT_AMP_LSB;
+ pack_ent |= tp->main << DDS_ENT_MAIN_LSB;
+ pack_ent |= tp->pre << DDS_ENT_PRE_LSB;
+ pack_ent |= tp->post << DDS_ENT_POST_LSB;
+ qib_write_kreg(dd, regidx, pack_ent);
+ /* Prevent back-to-back writes by hitting scratch */
+ qib_write_kreg(ppd->dd, kr_scratch, 0);
+}
+
+static const struct vendor_txdds_ent vendor_txdds[] = {
+ { /* Amphenol 1m 30awg NoEq */
+ { 0x41, 0x50, 0x48 }, "584470002 ",
+ { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 },
+ },
+ { /* Amphenol 3m 28awg NoEq */
+ { 0x41, 0x50, 0x48 }, "584470004 ",
+ { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 },
+ },
+ { /* Finisar 3m OM2 Optical */
+ { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL",
+ { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 },
+ },
+ { /* Finisar 30m OM2 Optical */
+ { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL",
+ { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 },
+ },
+ { /* Finisar Default OM2 Optical */
+ { 0x00, 0x90, 0x65 }, NULL,
+ { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 },
+ },
+ { /* Gore 1m 30awg NoEq */
+ { 0x00, 0x21, 0x77 }, "QSN3300-1 ",
+ { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 },
+ },
+ { /* Gore 2m 30awg NoEq */
+ { 0x00, 0x21, 0x77 }, "QSN3300-2 ",
+ { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 },
+ },
+ { /* Gore 1m 28awg NoEq */
+ { 0x00, 0x21, 0x77 }, "QSN3800-1 ",
+ { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 },
+ },
+ { /* Gore 3m 28awg NoEq */
+ { 0x00, 0x21, 0x77 }, "QSN3800-3 ",
+ { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 },
+ },
+ { /* Gore 5m 24awg Eq */
+ { 0x00, 0x21, 0x77 }, "QSN7000-5 ",
+ { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 },
+ },
+ { /* Gore 7m 24awg Eq */
+ { 0x00, 0x21, 0x77 }, "QSN7000-7 ",
+ { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 },
+ },
+ { /* Gore 5m 26awg Eq */
+ { 0x00, 0x21, 0x77 }, "QSN7600-5 ",
+ { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 },
+ },
+ { /* Gore 7m 26awg Eq */
+ { 0x00, 0x21, 0x77 }, "QSN7600-7 ",
+ { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 },
+ },
+ { /* Intersil 12m 24awg Active */
+ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224",
+ { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 },
+ },
+ { /* Intersil 10m 28awg Active */
+ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028",
+ { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 },
+ },
+ { /* Intersil 7m 30awg Active */
+ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730",
+ { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 },
+ },
+ { /* Intersil 5m 32awg Active */
+ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532",
+ { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 },
+ },
+ { /* Intersil Default Active */
+ { 0x00, 0x30, 0xB4 }, NULL,
+ { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 },
+ },
+ { /* Luxtera 20m Active Optical */
+ { 0x00, 0x25, 0x63 }, NULL,
+ { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 },
+ },
+ { /* Molex 1M Cu loopback */
+ { 0x00, 0x09, 0x3A }, "74763-0025 ",
+ { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 },
+ },
+ { /* Molex 2m 28awg NoEq */
+ { 0x00, 0x09, 0x3A }, "74757-2201 ",
+ { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 },
+ },
+};
+
+static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = {
+ /* amp, pre, main, post */
+ { 2, 2, 15, 6 }, /* Loopback */
+ { 0, 0, 0, 1 }, /* 2 dB */
+ { 0, 0, 0, 2 }, /* 3 dB */
+ { 0, 0, 0, 3 }, /* 4 dB */
+ { 0, 0, 0, 4 }, /* 5 dB */
+ { 0, 0, 0, 5 }, /* 6 dB */
+ { 0, 0, 0, 6 }, /* 7 dB */
+ { 0, 0, 0, 7 }, /* 8 dB */
+ { 0, 0, 0, 8 }, /* 9 dB */
+ { 0, 0, 0, 9 }, /* 10 dB */
+ { 0, 0, 0, 10 }, /* 11 dB */
+ { 0, 0, 0, 11 }, /* 12 dB */
+ { 0, 0, 0, 12 }, /* 13 dB */
+ { 0, 0, 0, 13 }, /* 14 dB */
+ { 0, 0, 0, 14 }, /* 15 dB */
+ { 0, 0, 0, 15 }, /* 16 dB */
+};
+
+static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = {
+ /* amp, pre, main, post */
+ { 2, 2, 15, 6 }, /* Loopback */
+ { 0, 0, 0, 8 }, /* 2 dB */
+ { 0, 0, 0, 8 }, /* 3 dB */
+ { 0, 0, 0, 9 }, /* 4 dB */
+ { 0, 0, 0, 9 }, /* 5 dB */
+ { 0, 0, 0, 10 }, /* 6 dB */
+ { 0, 0, 0, 10 }, /* 7 dB */
+ { 0, 0, 0, 11 }, /* 8 dB */
+ { 0, 0, 0, 11 }, /* 9 dB */
+ { 0, 0, 0, 12 }, /* 10 dB */
+ { 0, 0, 0, 12 }, /* 11 dB */
+ { 0, 0, 0, 13 }, /* 12 dB */
+ { 0, 0, 0, 13 }, /* 13 dB */
+ { 0, 0, 0, 14 }, /* 14 dB */
+ { 0, 0, 0, 14 }, /* 15 dB */
+ { 0, 0, 0, 15 }, /* 16 dB */
+};
+
+static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = {
+ /* amp, pre, main, post */
+ { 2, 2, 15, 6 }, /* Loopback */
+ { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */
+ { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */
+ { 0, 1, 0, 11 }, /* 4 dB */
+ { 0, 1, 0, 13 }, /* 5 dB */
+ { 0, 1, 0, 15 }, /* 6 dB */
+ { 0, 1, 3, 15 }, /* 7 dB */
+ { 0, 1, 7, 15 }, /* 8 dB */
+ { 0, 1, 7, 15 }, /* 9 dB */
+ { 0, 1, 8, 15 }, /* 10 dB */
+ { 0, 1, 9, 15 }, /* 11 dB */
+ { 0, 1, 10, 15 }, /* 12 dB */
+ { 0, 2, 6, 15 }, /* 13 dB */
+ { 0, 2, 7, 15 }, /* 14 dB */
+ { 0, 2, 8, 15 }, /* 15 dB */
+ { 0, 2, 9, 15 }, /* 16 dB */
+};
+
+/*
+ * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ.
+ * These are mostly used for mez cards going through connectors
+ * and backplane traces, but can be used to add other "unusual"
+ * table values as well.
+ */
+static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+};
+
+static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+};
+
+static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 1, 0, 4 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 5 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 6 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 1, 12, 10 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 11 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 12 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 14 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 6 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 7 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 8 }, /* QME7342 backplane setting */
+};
+
+static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
+ unsigned atten)
+{
+ /*
+ * The attenuation table starts at 2dB for entry 1,
+ * with entry 0 being the loopback entry.
+ */
+ if (atten <= 2)
+ atten = 1;
+ else if (atten > TXDDS_TABLE_SZ)
+ atten = TXDDS_TABLE_SZ - 1;
+ else
+ atten--;
+ return txdds + atten;
+}
+
+/*
+ * if override is set, the module parameter txselect has a value
+ * for this specific port, so use it, rather than our normal mechanism.
+ */
+static void find_best_ent(struct qib_pportdata *ppd,
+ const struct txdds_ent **sdr_dds,
+ const struct txdds_ent **ddr_dds,
+ const struct txdds_ent **qdr_dds, int override)
+{
+ struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache;
+ int idx;
+
+ /* Search table of known cables */
+ for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) {
+ const struct vendor_txdds_ent *v = vendor_txdds + idx;
+
+ if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) &&
+ (!v->partnum ||
+ !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) {
+ *sdr_dds = &v->sdr;
+ *ddr_dds = &v->ddr;
+ *qdr_dds = &v->qdr;
+ return;
+ }
+ }
+
+ /* Lookup serdes setting by cable type and attenuation */
+ if (!override && QSFP_IS_ACTIVE(qd->tech)) {
+ *sdr_dds = txdds_sdr + ppd->dd->board_atten;
+ *ddr_dds = txdds_ddr + ppd->dd->board_atten;
+ *qdr_dds = txdds_qdr + ppd->dd->board_atten;
+ return;
+ }
+
+ if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] ||
+ qd->atten[1])) {
+ *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]);
+ *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]);
+ *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]);
+ return;
+ } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) {
+ /*
+ * If we have no (or incomplete) data from the cable
+ * EEPROM, or no QSFP, or override is set, use the
+ * module parameter value to index into the attentuation
+ * table.
+ */
+ idx = ppd->cpspec->no_eep;
+ *sdr_dds = &txdds_sdr[idx];
+ *ddr_dds = &txdds_ddr[idx];
+ *qdr_dds = &txdds_qdr[idx];
+ } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
+ /* similar to above, but index into the "extra" table. */
+ idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ;
+ *sdr_dds = &txdds_extra_sdr[idx];
+ *ddr_dds = &txdds_extra_ddr[idx];
+ *qdr_dds = &txdds_extra_qdr[idx];
+ } else {
+ /* this shouldn't happen, it's range checked */
+ *sdr_dds = txdds_sdr + qib_long_atten;
+ *ddr_dds = txdds_ddr + qib_long_atten;
+ *qdr_dds = txdds_qdr + qib_long_atten;
+ }
+}
+
+static void init_txdds_table(struct qib_pportdata *ppd, int override)
+{
+ const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
+ struct txdds_ent *dds;
+ int idx;
+ int single_ent = 0;
+
+ find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
+
+ /* for mez cards or override, use the selected value for all entries */
+ if (!(ppd->dd->flags & QIB_HAS_QSFP) || override)
+ single_ent = 1;
+
+ /* Fill in the first entry with the best entry found. */
+ set_txdds(ppd, 0, sdr_dds);
+ set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds);
+ set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds);
+ if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
+ QIBL_LINKACTIVE)) {
+ dds = (struct txdds_ent *)(ppd->link_speed_active ==
+ QIB_IB_QDR ? qdr_dds :
+ (ppd->link_speed_active ==
+ QIB_IB_DDR ? ddr_dds : sdr_dds));
+ write_tx_serdes_param(ppd, dds);
+ }
+
+ /* Fill in the remaining entries with the default table values. */
+ for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) {
+ set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx);
+ set_txdds(ppd, idx + TXDDS_TABLE_SZ,
+ single_ent ? ddr_dds : txdds_ddr + idx);
+ set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ,
+ single_ent ? qdr_dds : txdds_qdr + idx);
+ }
+}
+
+#define KR_AHB_ACC KREG_IDX(ahb_access_ctrl)
+#define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg)
+#define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy)
+#define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address)
+#define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data)
+#define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read)
+#define AHB_TRANS_TRIES 10
+
+/*
+ * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4,
+ * 5=subsystem which is why most calls have "chan + chan >> 1"
+ * for the channel argument.
+ */
+static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr,
+ u32 data, u32 mask)
+{
+ u32 rd_data, wr_data, sz_mask;
+ u64 trans, acc, prev_acc;
+ u32 ret = 0xBAD0BAD;
+ int tries;
+
+ prev_acc = qib_read_kreg64(dd, KR_AHB_ACC);
+ /* From this point on, make sure we return access */
+ acc = (quad << 1) | 1;
+ qib_write_kreg(dd, KR_AHB_ACC, acc);
+
+ for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
+ trans = qib_read_kreg64(dd, KR_AHB_TRANS);
+ if (trans & AHB_TRANS_RDY)
+ break;
+ }
+ if (tries >= AHB_TRANS_TRIES) {
+ qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES);
+ goto bail;
+ }
+
+ /* If mask is not all 1s, we need to read, but different SerDes
+ * entities have different sizes
+ */
+ sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1;
+ wr_data = data & mask & sz_mask;
+ if ((~mask & sz_mask) != 0) {
+ trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1);
+ qib_write_kreg(dd, KR_AHB_TRANS, trans);
+
+ for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
+ trans = qib_read_kreg64(dd, KR_AHB_TRANS);
+ if (trans & AHB_TRANS_RDY)
+ break;
+ }
+ if (tries >= AHB_TRANS_TRIES) {
+ qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n",
+ AHB_TRANS_TRIES);
+ goto bail;
+ }
+ /* Re-read in case host split reads and read data first */
+ trans = qib_read_kreg64(dd, KR_AHB_TRANS);
+ rd_data = (uint32_t)(trans >> AHB_DATA_LSB);
+ wr_data |= (rd_data & ~mask & sz_mask);
+ }
+
+ /* If mask is not zero, we need to write. */
+ if (mask & sz_mask) {
+ trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1);
+ trans |= ((uint64_t)wr_data << AHB_DATA_LSB);
+ trans |= AHB_WR;
+ qib_write_kreg(dd, KR_AHB_TRANS, trans);
+
+ for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
+ trans = qib_read_kreg64(dd, KR_AHB_TRANS);
+ if (trans & AHB_TRANS_RDY)
+ break;
+ }
+ if (tries >= AHB_TRANS_TRIES) {
+ qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n",
+ AHB_TRANS_TRIES);
+ goto bail;
+ }
+ }
+ ret = wr_data;
+bail:
+ qib_write_kreg(dd, KR_AHB_ACC, prev_acc);
+ return ret;
+}
+
+static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data,
+ unsigned mask)
+{
+ struct qib_devdata *dd = ppd->dd;
+ int chan;
+ u32 rbc;
+
+ for (chan = 0; chan < SERDES_CHANS; ++chan) {
+ ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr,
+ data, mask);
+ rbc = ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ addr, 0, 0);
+ }
+}
+
+static int serdes_7322_init(struct qib_pportdata *ppd)
+{
+ u64 data;
+ u32 le_val;
+
+ /*
+ * Initialize the Tx DDS tables. Also done every QSFP event,
+ * for adapters with QSFP
+ */
+ init_txdds_table(ppd, 0);
+
+ /* ensure no tx overrides from earlier driver loads */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+
+ /* Patch some SerDes defaults to "Better for IB" */
+ /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */
+ ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
+
+ /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */
+ ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11));
+ /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */
+ ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6));
+
+ /* May be overridden in qsfp_7322_event */
+ le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT;
+ ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7));
+
+ /* enable LE1 adaptation for all but QME, which is disabled */
+ le_val = IS_QME(ppd->dd) ? 0 : 1;
+ ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5));
+
+ /* Clear cmode-override, may be set from older driver */
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14);
+
+ /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */
+ ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8));
+
+ /* setup LoS params; these are subsystem, so chan == 5 */
+ /* LoS filter threshold_count on, ch 0-3, set to 8 */
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11));
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4));
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11));
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4));
+
+ /* LoS filter threshold_count off, ch 0-3, set to 4 */
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0));
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8));
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0));
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8));
+
+ /* LoS filter select enabled */
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15);
+
+ /* LoS target data: SDR=4, DDR=2, QDR=1 */
+ ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */
+ ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */
+ ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */
+
+ data = qib_read_kreg_port(ppd, krp_serdesctrl);
+ qib_write_kreg_port(ppd, krp_serdesctrl, data |
+ SYM_MASK(IBSerdesCtrl_0, RXLOSEN));
+
+ /* rxbistena; set 0 to avoid effects of it switch later */
+ ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15);
+
+ /* Configure 4 DFE taps, and only they adapt */
+ ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0));
+
+ /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */
+ le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac;
+ ibsd_wr_allchans(ppd, 21, le_val, 0xfffe);
+
+ /*
+ * Set receive adaptation mode. SDR and DDR adaptation are
+ * always on, and QDR is initially enabled; later disabled.
+ */
+ qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL);
+ qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL);
+ qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
+ ppd->dd->cspec->r1 ?
+ QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
+ ppd->cpspec->qdr_dfe_on = 1;
+
+ /* FLoop LOS gate: PPM filter enabled */
+ ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
+
+ /* rx offset center enabled */
+ ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4);
+
+ if (!ppd->dd->cspec->r1) {
+ ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12);
+ ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8);
+ }
+
+ /* Set the frequency loop bandwidth to 15 */
+ ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5));
+
+ return 0;
+}
+
+/* start adjust QMH serdes parameters */
+
+static void set_man_code(struct qib_pportdata *ppd, int chan, int code)
+{
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 9, code << 9, 0x3f << 9);
+}
+
+static void set_man_mode_h1(struct qib_pportdata *ppd, int chan,
+ int enable, u32 tapenable)
+{
+ if (enable)
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 1, 3 << 10, 0x1f << 10);
+ else
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 1, 0, 0x1f << 10);
+}
+
+/* Set clock to 1, 0, 1, 0 */
+static void clock_man(struct qib_pportdata *ppd, int chan)
+{
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 4, 0x4000, 0x4000);
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 4, 0, 0x4000);
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 4, 0x4000, 0x4000);
+ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
+ 4, 0, 0x4000);
+}
+
+/*
+ * write the current Tx serdes pre,post,main,amp settings into the serdes.
+ * The caller must pass the settings appropriate for the current speed,
+ * or not care if they are correct for the current speed.
+ */
+static void write_tx_serdes_param(struct qib_pportdata *ppd,
+ struct txdds_ent *txdds)
+{
+ u64 deemph;
+
+ deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override);
+ /* field names for amp, main, post, pre, respectively */
+ deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) |
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) |
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) |
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena));
+
+ deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ tx_override_deemphasis_select);
+ deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txampcntl_d2a);
+ deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txc0_ena);
+ deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcp1_ena);
+ deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcn1_ena);
+ qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph);
+}
+
+/*
+ * Set the parameters for mez cards on link bounce, so they are
+ * always exactly what was requested. Similar logic to init_txdds
+ * but does just the serdes.
+ */
+static void adj_tx_serdes(struct qib_pportdata *ppd)
+{
+ const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
+ struct txdds_ent *dds;
+
+ find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1);
+ dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
+ qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ?
+ ddr_dds : sdr_dds));
+ write_tx_serdes_param(ppd, dds);
+}
+
+/* set QDR forced value for H1, if needed */
+static void force_h1(struct qib_pportdata *ppd)
+{
+ int chan;
+
+ ppd->cpspec->qdr_reforce = 0;
+ if (!ppd->dd->cspec->r1)
+ return;
+
+ for (chan = 0; chan < SERDES_CHANS; chan++) {
+ set_man_mode_h1(ppd, chan, 1, 0);
+ set_man_code(ppd, chan, ppd->cpspec->h1_val);
+ clock_man(ppd, chan);
+ set_man_mode_h1(ppd, chan, 0, 0);
+ }
+}
+
+#define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN)
+#define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en)
+
+#define R_OPCODE_LSB 3
+#define R_OP_NOP 0
+#define R_OP_SHIFT 2
+#define R_OP_UPDATE 3
+#define R_TDI_LSB 2
+#define R_TDO_LSB 1
+#define R_RDY 1
+
+static int qib_r_grab(struct qib_devdata *dd)
+{
+ u64 val;
+ val = SJA_EN;
+ qib_write_kreg(dd, kr_r_access, val);
+ qib_read_kreg32(dd, kr_scratch);
+ return 0;
+}
+
+/* qib_r_wait_for_rdy() not only waits for the ready bit, it
+ * returns the current state of R_TDO
+ */
+static int qib_r_wait_for_rdy(struct qib_devdata *dd)
+{
+ u64 val;
+ int timeout;
+ for (timeout = 0; timeout < 100 ; ++timeout) {
+ val = qib_read_kreg32(dd, kr_r_access);
+ if (val & R_RDY)
+ return (val >> R_TDO_LSB) & 1;
+ }
+ return -1;
+}
+
+static int qib_r_shift(struct qib_devdata *dd, int bisten,
+ int len, u8 *inp, u8 *outp)
+{
+ u64 valbase, val;
+ int ret, pos;
+
+ valbase = SJA_EN | (bisten << BISTEN_LSB) |
+ (R_OP_SHIFT << R_OPCODE_LSB);
+ ret = qib_r_wait_for_rdy(dd);
+ if (ret < 0)
+ goto bail;
+ for (pos = 0; pos < len; ++pos) {
+ val = valbase;
+ if (outp) {
+ outp[pos >> 3] &= ~(1 << (pos & 7));
+ outp[pos >> 3] |= (ret << (pos & 7));
+ }
+ if (inp) {
+ int tdi = inp[pos >> 3] >> (pos & 7);
+ val |= ((tdi & 1) << R_TDI_LSB);
+ }
+ qib_write_kreg(dd, kr_r_access, val);
+ qib_read_kreg32(dd, kr_scratch);
+ ret = qib_r_wait_for_rdy(dd);
+ if (ret < 0)
+ break;
+ }
+ /* Restore to NOP between operations. */
+ val = SJA_EN | (bisten << BISTEN_LSB);
+ qib_write_kreg(dd, kr_r_access, val);
+ qib_read_kreg32(dd, kr_scratch);
+ ret = qib_r_wait_for_rdy(dd);
+
+ if (ret >= 0)
+ ret = pos;
+bail:
+ return ret;
+}
+
+static int qib_r_update(struct qib_devdata *dd, int bisten)
+{
+ u64 val;
+ int ret;
+
+ val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB);
+ ret = qib_r_wait_for_rdy(dd);
+ if (ret >= 0) {
+ qib_write_kreg(dd, kr_r_access, val);
+ qib_read_kreg32(dd, kr_scratch);
+ }
+ return ret;
+}
+
+#define BISTEN_PORT_SEL 15
+#define LEN_PORT_SEL 625
+#define BISTEN_AT 17
+#define LEN_AT 156
+#define BISTEN_ETM 16
+#define LEN_ETM 632
+
+#define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE)
+
+/* these are common for all IB port use cases. */
+static u8 reset_at[BIT2BYTE(LEN_AT)] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
+};
+static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e,
+ 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7,
+ 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70,
+ 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00,
+ 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
+};
+static u8 at[BIT2BYTE(LEN_AT)] = {
+ 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
+};
+
+/* used for IB1 or IB2, only one in use */
+static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03,
+ 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00,
+ 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00,
+};
+
+/* used when both IB1 and IB2 are in use */
+static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79,
+ 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05,
+ 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+ 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07,
+ 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00,
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00,
+};
+
+/* used when only IB1 is in use */
+static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = {
+ 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13,
+ 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32,
+ 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* used when only IB2 is in use */
+static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = {
+ 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39,
+ 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32,
+ 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
+ 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
+ 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32,
+ 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a,
+ 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a,
+ 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+};
+
+/* used when both IB1 and IB2 are in use */
+static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = {
+ 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13,
+ 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c,
+ 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32,
+ 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a,
+ 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/*
+ * Do setup to properly handle IB link recovery; if port is zero, we
+ * are initializing to cover both ports; otherwise we are initializing
+ * to cover a single port card, or the port has reached INIT and we may
+ * need to switch coverage types.
+ */
+static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both)
+{
+ u8 *portsel, *etm;
+ struct qib_devdata *dd = ppd->dd;
+
+ if (!ppd->dd->cspec->r1)
+ return;
+ if (!both) {
+ dd->cspec->recovery_ports_initted++;
+ ppd->cpspec->recovery_init = 1;
+ }
+ if (!both && dd->cspec->recovery_ports_initted == 1) {
+ portsel = ppd->port == 1 ? portsel_port1 : portsel_port2;
+ etm = atetm_1port;
+ } else {
+ portsel = portsel_2port;
+ etm = atetm_2port;
+ }
+
+ if (qib_r_grab(dd) < 0 ||
+ qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 ||
+ qib_r_update(dd, BISTEN_ETM) < 0 ||
+ qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 ||
+ qib_r_update(dd, BISTEN_AT) < 0 ||
+ qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL,
+ portsel, NULL) < 0 ||
+ qib_r_update(dd, BISTEN_PORT_SEL) < 0 ||
+ qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 ||
+ qib_r_update(dd, BISTEN_AT) < 0 ||
+ qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 ||
+ qib_r_update(dd, BISTEN_ETM) < 0)
+ qib_dev_err(dd, "Failed IB link recovery setup\n");
+}
+
+static void check_7322_rxe_status(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 fmask;
+
+ if (dd->cspec->recovery_ports_initted != 1)
+ return; /* rest doesn't apply to dualport */
+ qib_write_kreg(dd, kr_control, dd->control |
+ SYM_MASK(Control, FreezeMode));
+ (void)qib_read_kreg64(dd, kr_scratch);
+ udelay(3); /* ibcreset asserted 400ns, be sure that's over */
+ fmask = qib_read_kreg64(dd, kr_act_fmask);
+ if (!fmask) {
+ /*
+ * require a powercycle before we'll work again, and make
+ * sure we get no more interrupts, and don't turn off
+ * freeze.
+ */
+ ppd->dd->cspec->stay_in_freeze = 1;
+ qib_7322_set_intr_state(ppd->dd, 0);
+ qib_write_kreg(dd, kr_fmask, 0ULL);
+ qib_dev_err(dd, "HCA unusable until powercycled\n");
+ return; /* eventually reset */
+ }
+
+ qib_write_kreg(ppd->dd, kr_hwerrclear,
+ SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1));
+
+ /* don't do the full clear_freeze(), not needed for this */
+ qib_write_kreg(dd, kr_control, dd->control);
+ qib_read_kreg32(dd, kr_scratch);
+ /* take IBC out of reset */
+ if (ppd->link_speed_supported) {
+ ppd->cpspec->ibcctrl_a &=
+ ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
+ qib_write_kreg_port(ppd, krp_ibcctrl_a,
+ ppd->cpspec->ibcctrl_a);
+ qib_read_kreg32(dd, kr_scratch);
+ if (ppd->lflags & QIBL_IB_LINK_DISABLED)
+ qib_set_ib_7322_lstate(ppd, 0,
+ QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+ }
+}