diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7322.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_iba7322.c | 51 |
1 files changed, 25 insertions, 26 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 50cceb3ab88..55de3cf3441 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -623,7 +623,6 @@ struct qib_chippport_specific { u8 ibmalfusesnap; struct qib_qsfp_data qsfp_data; char epmsgbuf[192]; /* for port error interrupt msg buffer */ - u8 bounced; }; static struct { @@ -1881,23 +1880,7 @@ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) IB_PHYSPORTSTATE_DISABLED) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); - else { - u32 lstate; - /* - * We need the current logical link state before - * lflags are set in handle_e_ibstatuschanged. - */ - lstate = qib_7322_iblink_state(ibcs); - - if (IS_QMH(dd) && !ppd->cpspec->bounced && - ltstate == IB_PHYSPORTSTATE_LINKUP && - (lstate >= IB_PORT_INIT && - lstate <= IB_PORT_ACTIVE)) { - ppd->cpspec->bounced = 1; - qib_7322_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, - IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL); - } - + else /* * Since going into a recovery state causes the link * state to go down and since recovery is transitory, @@ -1911,7 +1894,6 @@ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) qib_handle_e_ibstatuschanged(ppd, ibcs); - } } if (*msg && iserr) qib_dev_porterr(dd, ppd->port, "%s error\n", msg); @@ -2381,6 +2363,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); + /* Hold the link state machine for mezz boards */ + if (IS_QMH(dd) || IS_QME(dd)) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + /* Also enable IBSTATUSCHG interrupt. */ val = qib_read_kreg_port(ppd, krp_errmask); qib_write_kreg_port(ppd, krp_errmask, @@ -3312,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); dd->flags |= QIB_DOING_RESET; @@ -3740,7 +3727,7 @@ static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) /* * As with width, only write the actual register if the * link is currently down, otherwise takes effect on next - * link change. Since setting is being explictly requested + * link change. Since setting is being explicitly requested * (via MAD or sysfs), clear autoneg failure status if speed * autoneg is enabled. */ @@ -4176,7 +4163,7 @@ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); @@ -5595,9 +5582,16 @@ static void qsfp_7322_event(struct work_struct *work) * even on failure to read cable information. We don't * get here for QME, so IS_QME check not needed here. */ - le2 = (!ret && qd->cache.atten[1] >= qib_long_atten && - !ppd->dd->cspec->r1 && QSFP_IS_CU(qd->cache.tech)) ? - LE2_5m : LE2_DEFAULT; + if (!ret && !ppd->dd->cspec->r1) { + if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) + le2 = LE2_QME; + else if (qd->cache.atten[1] >= qib_long_atten && + QSFP_IS_CU(qd->cache.tech)) + le2 = LE2_5m; + else + le2 = LE2_DEFAULT; + } else + le2 = LE2_DEFAULT; ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); init_txdds_table(ppd, 0); } @@ -5702,6 +5696,11 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) ppd->cpspec->h1_val = h1; /* now change the IBC and serdes, overriding generic */ init_txdds_table(ppd, 1); + /* Re-enable the physical state machine on mezz boards + * now that the correct settings have been set. */ + if (IS_QMH(dd) || IS_QME(dd)) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); any++; } if (*nxt == '\n') @@ -7484,7 +7483,7 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ /* Data Rate Select [5:7-6] (leave as default) */ - /* RX Parralel Word Width [3:10-8] (leave as default) */ + /* RX Parallel Word Width [3:10-8] (leave as default) */ /* RX REST */ /* Single- or Multi-channel reset */ |