diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7322.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_iba7322.c | 7645 |
1 files changed, 7645 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c new file mode 100644 index 00000000000..503992d9c5c --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -0,0 +1,7645 @@ +/* + * Copyright (c) 2008, 2009, 2010 QLogic Corporation. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * This file contains all of the code that is specific to the + * InfiniPath 7322 chip + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <rdma/ib_verbs.h> +#include <rdma/ib_smi.h> + +#include "qib.h" +#include "qib_7322_regs.h" +#include "qib_qsfp.h" + +#include "qib_mad.h" + +static void qib_setup_7322_setextled(struct qib_pportdata *, u32); +static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); +static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); +static irqreturn_t qib_7322intr(int irq, void *data); +static irqreturn_t qib_7322bufavail(int irq, void *data); +static irqreturn_t sdma_intr(int irq, void *data); +static irqreturn_t sdma_idle_intr(int irq, void *data); +static irqreturn_t sdma_progress_intr(int irq, void *data); +static irqreturn_t sdma_cleanup_intr(int irq, void *data); +static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, + struct qib_ctxtdata *rcd); +static u8 qib_7322_phys_portstate(u64); +static u32 qib_7322_iblink_state(u64); +static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, + u16 linitcmd); +static void force_h1(struct qib_pportdata *); +static void adj_tx_serdes(struct qib_pportdata *); +static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); +static void qib_7322_mini_pcs_reset(struct qib_pportdata *); + +static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); +static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); + +#define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) + +/* LE2 serdes values for different cases */ +#define LE2_DEFAULT 5 +#define LE2_5m 4 +#define LE2_QME 0 + +/* Below is special-purpose, so only really works for the IB SerDes blocks. */ +#define IBSD(hw_pidx) (hw_pidx + 2) + +/* these are variables for documentation and experimentation purposes */ +static const unsigned rcv_int_timeout = 375; +static const unsigned rcv_int_count = 16; +static const unsigned sdma_idle_cnt = 64; + +/* Time to stop altering Rx Equalization parameters, after link up. */ +#define RXEQ_DISABLE_MSECS 2500 + +/* + * Number of VLs we are configured to use (to allow for more + * credits per vl, etc.) + */ +ushort qib_num_cfg_vls = 2; +module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); +MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); + +static ushort qib_chase = 1; +module_param_named(chase, qib_chase, ushort, S_IRUGO); +MODULE_PARM_DESC(chase, "Enable state chase handling"); + +static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ +module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); +MODULE_PARM_DESC(long_attenuation, \ + "attenuation cutoff (dB) for long copper cable setup"); + +static ushort qib_singleport; +module_param_named(singleport, qib_singleport, ushort, S_IRUGO); +MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); + +#define MAX_ATTEN_LEN 64 /* plenty for any real system */ +/* for read back, default index is ~5m copper cable */ +static char txselect_list[MAX_ATTEN_LEN] = "10"; +static struct kparam_string kp_txselect = { + .string = txselect_list, + .maxlen = MAX_ATTEN_LEN +}; +static int setup_txselect(const char *, struct kernel_param *); +module_param_call(txselect, setup_txselect, param_get_string, + &kp_txselect, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(txselect, \ + "Tx serdes indices (for no QSFP or invalid QSFP data)"); + +#define BOARD_QME7342 5 +#define BOARD_QMH7342 6 +#define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ + BOARD_QMH7342) +#define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ + BOARD_QME7342) + +#define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) + +#define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) + +#define MASK_ACROSS(lsb, msb) \ + (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) + +#define SYM_RMASK(regname, fldname) ((u64) \ + QIB_7322_##regname##_##fldname##_RMASK) + +#define SYM_MASK(regname, fldname) ((u64) \ + QIB_7322_##regname##_##fldname##_RMASK << \ + QIB_7322_##regname##_##fldname##_LSB) + +#define SYM_FIELD(value, regname, fldname) ((u64) \ + (((value) >> SYM_LSB(regname, fldname)) & \ + SYM_RMASK(regname, fldname))) + +/* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ +#define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ + (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) + +#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) +#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) +#define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) +#define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) +#define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) +/* Below because most, but not all, fields of IntMask have that full suffix */ +#define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) + + +#define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) + +/* + * the size bits give us 2^N, in KB units. 0 marks as invalid, + * and 7 is reserved. We currently use only 2KB and 4KB + */ +#define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB +#define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */ +#define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */ +#define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ + +#define SendIBSLIDAssignMask \ + QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK +#define SendIBSLMCMask \ + QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK + +#define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn) +#define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn) +#define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn) +#define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn) +#define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN) +#define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN) + +#define _QIB_GPIO_SDA_NUM 1 +#define _QIB_GPIO_SCL_NUM 0 +#define QIB_EEPROM_WEN_NUM 14 +#define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */ + +/* HW counter clock is at 4nsec */ +#define QIB_7322_PSXMITWAIT_CHECK_RATE 4000 + +/* full speed IB port 1 only */ +#define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR) +#define PORT_SPD_CAP_SHIFT 3 + +/* full speed featuremask, both ports */ +#define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT)) + +/* + * This file contains almost all the chip-specific register information and + * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip. + */ + +/* Use defines to tie machine-generated names to lower-case names */ +#define kr_contextcnt KREG_IDX(ContextCnt) +#define kr_control KREG_IDX(Control) +#define kr_counterregbase KREG_IDX(CntrRegBase) +#define kr_errclear KREG_IDX(ErrClear) +#define kr_errmask KREG_IDX(ErrMask) +#define kr_errstatus KREG_IDX(ErrStatus) +#define kr_extctrl KREG_IDX(EXTCtrl) +#define kr_extstatus KREG_IDX(EXTStatus) +#define kr_gpio_clear KREG_IDX(GPIOClear) +#define kr_gpio_mask KREG_IDX(GPIOMask) +#define kr_gpio_out KREG_IDX(GPIOOut) +#define kr_gpio_status KREG_IDX(GPIOStatus) +#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) +#define kr_debugportval KREG_IDX(DebugPortValueReg) +#define kr_fmask KREG_IDX(feature_mask) +#define kr_act_fmask KREG_IDX(active_feature_mask) +#define kr_hwerrclear KREG_IDX(HwErrClear) +#define kr_hwerrmask KREG_IDX(HwErrMask) +#define kr_hwerrstatus KREG_IDX(HwErrStatus) +#define kr_intclear KREG_IDX(IntClear) +#define kr_intmask KREG_IDX(IntMask) +#define kr_intredirect KREG_IDX(IntRedirect0) +#define kr_intstatus KREG_IDX(IntStatus) +#define kr_pagealign KREG_IDX(PageAlign) +#define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0) +#define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */ +#define kr_rcvegrbase KREG_IDX(RcvEgrBase) +#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) +#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) +#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) +#define kr_rcvhdrsize KREG_IDX(RcvHdrSize) +#define kr_rcvtidbase KREG_IDX(RcvTIDBase) +#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) +#define kr_revision KREG_IDX(Revision) +#define kr_scratch KREG_IDX(Scratch) +#define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */ +#define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */ +#define kr_sendctrl KREG_IDX(SendCtrl) +#define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */ +#define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */ +#define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) +#define kr_sendpiobufbase KREG_IDX(SendBufBase) +#define kr_sendpiobufcnt KREG_IDX(SendBufCnt) +#define kr_sendpiosize KREG_IDX(SendBufSize) +#define kr_sendregbase KREG_IDX(SendRegBase) +#define kr_sendbufavail0 KREG_IDX(SendBufAvail0) +#define kr_userregbase KREG_IDX(UserRegBase) +#define kr_intgranted KREG_IDX(Int_Granted) +#define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int) +#define kr_intblocked KREG_IDX(IntBlocked) +#define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG) + +/* + * per-port kernel registers. Access only with qib_read_kreg_port() + * or qib_write_kreg_port() + */ +#define krp_errclear KREG_IBPORT_IDX(ErrClear) +#define krp_errmask KREG_IBPORT_IDX(ErrMask) +#define krp_errstatus KREG_IBPORT_IDX(ErrStatus) +#define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0) +#define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit) +#define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID) +#define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig) +#define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA) +#define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB) +#define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC) +#define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA) +#define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB) +#define krp_txestatus KREG_IBPORT_IDX(TXEStatus) +#define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0) +#define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl) +#define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey) +#define krp_psinterval KREG_IBPORT_IDX(PSInterval) +#define krp_psstart KREG_IBPORT_IDX(PSStart) +#define krp_psstat KREG_IBPORT_IDX(PSStat) +#define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP) +#define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl) +#define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt) +#define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA) +#define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0) +#define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15) +#define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl) +#define krp_sendctrl KREG_IBPORT_IDX(SendCtrl) +#define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase) +#define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0) +#define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1) +#define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2) +#define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0) +#define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1) +#define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2) +#define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt) +#define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead) +#define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr) +#define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt) +#define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen) +#define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld) +#define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt) +#define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus) +#define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail) +#define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom) +#define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign) +#define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask) +#define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX) +#define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD) +#define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE) +#define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) + +/* + * Per-context kernel registers. Acess only with qib_read_kreg_ctxt() + * or qib_write_kreg_ctxt() + */ +#define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) +#define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) + +/* + * TID Flow table, per context. Reduces + * number of hdrq updates to one per flow (or on errors). + * context 0 and 1 share same memory, but have distinct + * addresses. Since for now, we never use expected sends + * on kernel contexts, we don't worry about that (we initialize + * those entries for ctxt 0/1 on driver load twice, for example). + */ +#define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */ +#define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0)) + +/* these are the error bits in the tid flows, and are W1C */ +#define TIDFLOW_ERRBITS ( \ + (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \ + SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \ + (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \ + SYM_LSB(RcvTIDFlowTable0, SeqMismatch))) + +/* Most (not all) Counters are per-IBport. + * Requires LBIntCnt is at offset 0 in the group + */ +#define CREG_IDX(regname) \ +((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) + +#define crp_badformat CREG_IDX(RxVersionErrCnt) +#define crp_err_rlen CREG_IDX(RxLenErrCnt) +#define crp_erricrc CREG_IDX(RxICRCErrCnt) +#define crp_errlink CREG_IDX(RxLinkMalformCnt) +#define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt) +#define crp_errpkey CREG_IDX(RxPKeyMismatchCnt) +#define crp_errvcrc CREG_IDX(RxVCRCErrCnt) +#define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) +#define crp_iblinkdown CREG_IDX(IBLinkDownedCnt) +#define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) +#define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt) +#define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt) +#define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) +#define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) +#define crp_pktrcv CREG_IDX(RxDataPktCnt) +#define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) +#define crp_pktsend CREG_IDX(TxDataPktCnt) +#define crp_pktsendflow CREG_IDX(TxFlowPktCnt) +#define crp_psrcvdatacount CREG_IDX(PSRcvDataCount) +#define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount) +#define crp_psxmitdatacount CREG_IDX(PSXmitDataCount) +#define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount) +#define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount) +#define crp_rcvebp CREG_IDX(RxEBPCnt) +#define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt) +#define crp_rcvovfl CREG_IDX(RxBufOvflCnt) +#define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt) +#define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt) +#define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) +#define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt) +#define crp_rxvlerr CREG_IDX(RxVlErrCnt) +#define crp_sendstall CREG_IDX(TxFlowStallCnt) +#define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt) +#define crp_txhdrerr CREG_IDX(TxHeadersErrCnt) +#define crp_txlenerr CREG_IDX(TxLenErrCnt) +#define crp_txlenerr CREG_IDX(TxLenErrCnt) +#define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt) +#define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt) +#define crp_txunderrun CREG_IDX(TxUnderrunCnt) +#define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt) +#define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) +#define crp_wordrcv CREG_IDX(RxDwordCnt) +#define crp_wordsend CREG_IDX(TxDwordCnt) +#define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut) + +/* these are the (few) counters that are not port-specific */ +#define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \ + QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) +#define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt) +#define cr_lbint CREG_DEVIDX(LBIntCnt) +#define cr_lbstall CREG_DEVIDX(LBFlowStallCnt) +#define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt) +#define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt) +#define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt) +#define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt) + +/* no chip register for # of IB ports supported, so define */ +#define NUM_IB_PORTS 2 + +/* 1 VL15 buffer per hardware IB port, no register for this, so define */ +#define NUM_VL15_BUFS NUM_IB_PORTS + +/* + * context 0 and 1 are special, and there is no chip register that + * defines this value, so we have to define it here. + * These are all allocated to either 0 or 1 for single port + * hardware configuration, otherwise each gets half + */ +#define KCTXT0_EGRCNT 2048 + +/* values for vl and port fields in PBC, 7322-specific */ +#define PBC_PORT_SEL_LSB 26 +#define PBC_PORT_SEL_RMASK 1 +#define PBC_VL_NUM_LSB 27 +#define PBC_VL_NUM_RMASK 7 +#define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ +#define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ + +static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { + [IB_RATE_2_5_GBPS] = 16, + [IB_RATE_5_GBPS] = 8, + [IB_RATE_10_GBPS] = 4, + [IB_RATE_20_GBPS] = 2, + [IB_RATE_30_GBPS] = 2, + [IB_RATE_40_GBPS] = 1 +}; + +#define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive) +#define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive) + +/* link training states, from IBC */ +#define IB_7322_LT_STATE_DISABLED 0x00 +#define IB_7322_LT_STATE_LINKUP 0x01 +#define IB_7322_LT_STATE_POLLACTIVE 0x02 +#define IB_7322_LT_STATE_POLLQUIET 0x03 +#define IB_7322_LT_STATE_SLEEPDELAY 0x04 +#define IB_7322_LT_STATE_SLEEPQUIET 0x05 +#define IB_7322_LT_STATE_CFGDEBOUNCE 0x08 +#define IB_7322_LT_STATE_CFGRCVFCFG 0x09 +#define IB_7322_LT_STATE_CFGWAITRMT 0x0a +#define IB_7322_LT_STATE_CFGIDLE 0x0b +#define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c +#define IB_7322_LT_STATE_TXREVLANES 0x0d +#define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e +#define IB_7322_LT_STATE_RECOVERIDLE 0x0f +#define IB_7322_LT_STATE_CFGENH 0x10 +#define IB_7322_LT_STATE_CFGTEST 0x11 + +/* link state machine states from IBC */ +#define IB_7322_L_STATE_DOWN 0x0 +#define IB_7322_L_STATE_INIT 0x1 +#define IB_7322_L_STATE_ARM 0x2 +#define IB_7322_L_STATE_ACTIVE 0x3 +#define IB_7322_L_STATE_ACT_DEFER 0x4 + +static const u8 qib_7322_physportstate[0x20] = { + [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, + [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, + [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, + [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, + [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, + [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, + [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7322_LT_STATE_CFGRCVFCFG] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7322_LT_STATE_CFGWAITRMT] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE, + [IB_7322_LT_STATE_RECOVERRETRAIN] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_7322_LT_STATE_RECOVERWAITRMT] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_7322_LT_STATE_RECOVERIDLE] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, + [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH, + [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN +}; + +struct qib_chip_specific { + u64 __iomem *cregbase; + u64 *cntrs; + spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ + spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ + u64 main_int_mask; /* clear bits which have dedicated handlers */ + u64 int_enable_mask; /* for per port interrupts in single port mode */ + u64 errormask; + u64 hwerrmask; + u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ + u64 gpio_mask; /* shadow the gpio mask register */ + u64 extctrl; /* shadow the gpio output enable, etc... */ + u32 ncntrs; + u32 nportcntrs; + u32 cntrnamelen; + u32 portcntrnamelen; + u32 numctxts; + u32 rcvegrcnt; + u32 updthresh; /* current AvailUpdThld */ + u32 updthresh_dflt; /* default AvailUpdThld */ + u32 r1; + int irq; + u32 num_msix_entries; + u32 sdmabufcnt; + u32 lastbuf_for_pio; + u32 stay_in_freeze; + u32 recovery_ports_initted; + struct msix_entry *msix_entries; + void **msix_arg; + unsigned long *sendchkenable; + unsigned long *sendgrhchk; + unsigned long *sendibchk; + u32 rcvavail_timeout[18]; + char emsgbuf[128]; /* for device error interrupt msg buffer */ +}; + +/* Table of entries in "human readable" form Tx Emphasis. */ +struct txdds_ent { + u8 amp; + u8 pre; + u8 main; + u8 post; +}; + +struct vendor_txdds_ent { + u8 oui[QSFP_VOUI_LEN]; + u8 *partnum; + struct txdds_ent sdr; + struct txdds_ent ddr; + struct txdds_ent qdr; +}; + +static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); + +#define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ +#define TXDDS_EXTRA_SZ 11 /* number of extra tx settings entries */ +#define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ + +#define H1_FORCE_VAL 8 +#define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ +#define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ + +/* The static and dynamic registers are paired, and the pairs indexed by spd */ +#define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ + + ((spd) * 2)) + +#define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */ +#define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */ +#define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */ +#define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ +#define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ + +struct qib_chippport_specific { + u64 __iomem *kpregbase; + u64 __iomem *cpregbase; + u64 *portcntrs; + struct qib_pportdata *ppd; + wait_queue_head_t autoneg_wait; + struct delayed_work autoneg_work; + struct delayed_work ipg_work; + struct timer_list chase_timer; + /* + * these 5 fields are used to establish deltas for IB symbol + * errors and linkrecovery errors. They can be reported on + * some chips during link negotiation prior to INIT, and with + * DDR when faking DDR negotiations with non-IBTA switches. + * The chip counters are adjusted at driver unload if there is + * a non-zero delta. + */ + u64 ibdeltainprog; + u64 ibsymdelta; + u64 ibsymsnap; + u64 iblnkerrdelta; + u64 iblnkerrsnap; + u64 iblnkdownsnap; + u64 iblnkdowndelta; + u64 ibmalfdelta; + u64 ibmalfsnap; + u64 ibcctrl_a; /* krp_ibcctrl_a shadow */ + u64 ibcctrl_b; /* krp_ibcctrl_b shadow */ + u64 qdr_dfe_time; + u64 chase_end; + u32 autoneg_tries; + u32 recovery_init; + u32 qdr_dfe_on; + u32 qdr_reforce; + /* + * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. + * entry zero is unused, to simplify indexing + */ + u8 h1_val; + u8 no_eep; /* txselect table index to use if no qsfp info */ + u8 ipg_tries; + u8 ibmalfusesnap; + struct qib_qsfp_data qsfp_data; + char epmsgbuf[192]; /* for port error interrupt msg buffer */ +}; + +static struct { + const char *name; + irq_handler_t handler; + int lsb; + int port; /* 0 if not port-specific, else port # */ +} irq_table[] = { + { QIB_DRV_NAME, qib_7322intr, -1, 0 }, + { QIB_DRV_NAME " (buf avail)", qib_7322bufavail, + SYM_LSB(IntStatus, SendBufAvail), 0 }, + { QIB_DRV_NAME " (sdma 0)", sdma_intr, + SYM_LSB(IntStatus, SDmaInt_0), 1 }, + { QIB_DRV_NAME " (sdma 1)", sdma_intr, + SYM_LSB(IntStatus, SDmaInt_1), 2 }, + { QIB_DRV_NAME " (sdmaI 0)", sdma_idle_intr, + SYM_LSB(IntStatus, SDmaIdleInt_0), 1 }, + { QIB_DRV_NAME " (sdmaI 1)", sdma_idle_intr, + SYM_LSB(IntStatus, SDmaIdleInt_1), 2 }, + { QIB_DRV_NAME " (sdmaP 0)", sdma_progress_intr, + SYM_LSB(IntStatus, SDmaProgressInt_0), 1 }, + { QIB_DRV_NAME " (sdmaP 1)", sdma_progress_intr, + SYM_LSB(IntStatus, SDmaProgressInt_1), 2 }, + { QIB_DRV_NAME " (sdmaC 0)", sdma_cleanup_intr, + SYM_LSB(IntStatus, SDmaCleanupDone_0), 1 }, + { QIB_DRV_NAME " (sdmaC 1)", sdma_cleanup_intr, + SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 }, +}; + +/* ibcctrl bits */ +#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 +/* cycle through TS1/TS2 till OK */ +#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 +/* wait for TS1, then go on */ +#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 +#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 + +#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ +#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ +#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ + +#define BLOB_7322_IBCHG 0x101 + +static inline void qib_write_kreg(const struct qib_devdata *dd, + const u32 regno, u64 value); +static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32); +static void write_7322_initregs(struct qib_devdata *); +static void write_7322_init_portregs(struct qib_pportdata *); +static void setup_7322_link_recovery(struct qib_pportdata *, u32); +static void check_7322_rxe_status(struct qib_pportdata *); +static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *); + +/** + * qib_read_ureg32 - read 32-bit virtualized per-context register + * @dd: device + * @regno: register number + * @ctxt: context number + * + * Return the contents of a register that is virtualized to be per context. + * Returns -1 on errors (not distinguishable from valid contents at + * runtime; we may add a separate error variable at some point). + */ +static inline u32 qib_read_ureg32(const struct qib_devdata *dd, + enum qib_ureg regno, int ctxt) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readl(regno + (u64 __iomem *)( + (dd->ureg_align * ctxt) + (dd->userbase ? + (char __iomem *)dd->userbase : + (char __iomem *)dd->kregbase + dd->uregbase))); +} + +/** + * qib_read_ureg - read virtualized per-context register + * @dd: device + * @regno: register number + * @ctxt: context number + * + * Return the contents of a register that is virtualized to be per context. + * Returns -1 on errors (not distinguishable from valid contents at + * runtime; we may add a separate error variable at some point). + */ +static inline u64 qib_read_ureg(const struct qib_devdata *dd, + enum qib_ureg regno, int ctxt) +{ + + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readq(regno + (u64 __iomem *)( + (dd->ureg_align * ctxt) + (dd->userbase ? + (char __iomem *)dd->userbase : + (char __iomem *)dd->kregbase + dd->uregbase))); +} + +/** + * qib_write_ureg - write virtualized per-context register + * @dd: device + * @regno: register number + * @value: value + * @ctxt: context + * + * Write the contents of a register that is virtualized to be per context. + */ +static inline void qib_write_ureg(const struct qib_devdata *dd, + enum qib_ureg regno, u64 value, int ctxt) +{ + u64 __iomem *ubase; + if (dd->userbase) + ubase = (u64 __iomem *) + ((char __iomem *) dd->userbase + + dd->ureg_align * ctxt); + else + ubase = (u64 __iomem *) + (dd->uregbase + + (char __iomem *) dd->kregbase + + dd->ureg_align * ctxt); + + if (dd->kregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &ubase[regno]); +} + +static inline u32 qib_read_kreg32(const struct qib_devdata *dd, + const u32 regno) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return -1; + return readl((u32 __iomem *) &dd->kregbase[regno]); +} + +static inline u64 qib_read_kreg64(const struct qib_devdata *dd, + const u32 regno) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return -1; + return readq(&dd->kregbase[regno]); +} + +static inline void qib_write_kreg(const struct qib_devdata *dd, + const u32 regno, u64 value) +{ + if (dd->kregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &dd->kregbase[regno]); +} + +/* + * not many sanity checks for the port-specific kernel register routines, + * since they are only used when it's known to be safe. +*/ +static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, + const u16 regno) +{ + if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) + return 0ULL; + return readq(&ppd->cpspec->kpregbase[regno]); +} + +static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, + const u16 regno, u64 value) +{ + if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && + (ppd->dd->flags & QIB_PRESENT)) + writeq(value, &ppd->cpspec->kpregbase[regno]); +} + +/** + * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register + * @dd: the qlogic_ib device + * @regno: the register number to write + * @ctxt: the context containing the register + * @value: the value to write + */ +static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, + const u16 regno, unsigned ctxt, + u64 value) +{ + qib_write_kreg(dd, regno + ctxt, value); +} + +static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) +{ + if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readq(&dd->cspec->cregbase[regno]); + + +} + +static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) +{ + if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readl(&dd->cspec->cregbase[regno]); + + +} + +static inline void write_7322_creg_port(const struct qib_pportdata *ppd, + u16 regno, u64 value) +{ + if (ppd->cpspec && ppd->cpspec->cpregbase && + (ppd->dd->flags & QIB_PRESENT)) + writeq(value, &ppd->cpspec->cpregbase[regno]); +} + +static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, + u16 regno) +{ + if (!ppd->cpspec || !ppd->cpspec->cpregbase || + !(ppd->dd->flags & QIB_PRESENT)) + return 0; + return readq(&ppd->cpspec->cpregbase[regno]); +} + +static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, + u16 regno) +{ + if (!ppd->cpspec || !ppd->cpspec->cpregbase || + !(ppd->dd->flags & QIB_PRESENT)) + return 0; + return readl(&ppd->cpspec->cpregbase[regno]); +} + +/* bits in Control register */ +#define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) +#define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) + +/* bits in general interrupt regs */ +#define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) +#define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) +#define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) +#define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) +#define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) +#define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) +#define QIB_I_C_ERROR INT_MASK(Err) + +#define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) +#define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) +#define QIB_I_GPIO INT_MASK(AssertGPIO) +#define QIB_I_P_SDMAINT(pidx) \ + (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ + INT_MASK_P(SDmaProgress, pidx) | \ + INT_MASK_PM(SDmaCleanupDone, pidx)) + +/* Interrupt bits that are "per port" */ +#define QIB_I_P_BITSEXTANT(pidx) \ + (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ + INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ + INT_MASK_P(SDmaProgress, pidx) | \ + INT_MASK_PM(SDmaCleanupDone, pidx)) + +/* Interrupt bits that are common to a device */ +/* currently unused: QIB_I_SPIOSENT */ +#define QIB_I_C_BITSEXTANT \ + (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ + QIB_I_SPIOSENT | \ + QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) + +#define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ + QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) + +/* + * Error bits that are "per port". + */ +#define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) +#define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) +#define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) +#define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) +#define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) +#define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) +#define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) +#define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) +#define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) +#define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) +#define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) +#define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) +#define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) +#define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) +#define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) +#define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) +#define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) +#define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) +#define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) +#define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) +#define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) +#define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) +#define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) +#define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) +#define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) +#define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) +#define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) +#define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) + +#define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) +#define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) +#define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) +#define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) +#define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) +#define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) +#define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) +#define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) +#define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) +#define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) +#define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) + +/* Error bits that are common to a device */ +#define QIB_E_RESET ERR_MASK(ResetNegated) +#define QIB_E_HARDWARE ERR_MASK(HardwareErr) +#define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) + + +/* + * Per chip (rather than per-port) errors. Most either do + * nothing but trigger a print (because they self-recover, or + * always occur in tandem with other errors that handle the + * issue), or because they indicate errors with no recovery, + * but we want to know that they happened. + */ +#define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) +#define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) +#define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) +#define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) +#define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) +#define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) +#define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) +#define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) + +/* SDMA chip errors (not per port) + * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get + * the SDMAHALT error immediately, so we just print the dup error via the + * E_AUTO mechanism. This is true of most of the per-port fatal errors + * as well, but since this is port-independent, by definition, it's + * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per + * packet send errors, and so are handled in the same manner as other + * per-packet errors. + */ +#define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) +#define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) +#define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) + +/* + * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS + * it is used to print "common" packet errors. + */ +#define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ + QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ + QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ + QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ + QIB_E_P_REBP) + +/* Error Bits that Packet-related (Receive, per-port) */ +#define QIB_E_P_RPKTERRS (\ + QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ + QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ + QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ + QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ + QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ + QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) + +/* + * Error bits that are Send-related (per port) + * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). + * All of these potentially need to have a buffer disarmed + */ +#define QIB_E_P_SPKTERRS (\ + QIB_E_P_SUNEXP_PKTNUM |\ + QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ + QIB_E_P_SMAXPKTLEN |\ + QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ + QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ + QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) + +#define QIB_E_SPKTERRS ( \ + QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ + ERR_MASK_N(SendUnsupportedVLErr) | \ + QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) + +#define QIB_E_P_SDMAERRS ( \ + QIB_E_P_SDMAHALT | \ + QIB_E_P_SDMADESCADDRMISALIGN | \ + QIB_E_P_SDMAUNEXPDATA | \ + QIB_E_P_SDMAMISSINGDW | \ + QIB_E_P_SDMADWEN | \ + QIB_E_P_SDMARPYTAG | \ + QIB_E_P_SDMA1STDESC | \ + QIB_E_P_SDMABASE | \ + QIB_E_P_SDMATAILOUTOFBOUND | \ + QIB_E_P_SDMAOUTOFBOUND | \ + QIB_E_P_SDMAGENMISMATCH) + +/* + * This sets some bits more than once, but makes it more obvious which + * bits are not handled under other categories, and the repeat definition + * is not a problem. + */ +#define QIB_E_P_BITSEXTANT ( \ + QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ + QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ + QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ + QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ + ) + +/* + * These are errors that can occur when the link + * changes state while a packet is being sent or received. This doesn't + * cover things like EBP or VCRC that can be the result of a sending + * having the link change state, so we receive a "known bad" packet. + * All of these are "per port", so renamed: + */ +#define QIB_E_P_LINK_PKTERRS (\ + QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ + QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ + QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ + QIB_E_P_RUNEXPCHAR) + +/* + * This sets some bits more than once, but makes it more obvious which + * bits are not handled under other categories (such as QIB_E_SPKTERRS), + * and the repeat definition is not a problem. + */ +#define QIB_E_C_BITSEXTANT (\ + QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ + QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ + QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) + +/* Likewise Neuter E_SPKT_ERRS_IGNORE */ +#define E_SPKT_ERRS_IGNORE 0 + +#define QIB_EXTS_MEMBIST_DISABLED \ + SYM_MASK(EXTStatus, MemBISTDisabled) +#define QIB_EXTS_MEMBIST_ENDTEST \ + SYM_MASK(EXTStatus, MemBISTEndTest) + +#define QIB_E_SPIOARMLAUNCH \ + ERR_MASK(SendArmLaunchErr) + +#define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) +#define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) + +/* + * IBTA_1_2 is set when multiple speeds are enabled (normal), + * and also if forced QDR (only QDR enabled). It's enabled for the + * forced QDR case so that scrambling will be enabled by the TS3 + * exchange, when supported by both sides of the link. + */ +#define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) +#define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) +#define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) +#define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) +#define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) +#define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ + SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) +#define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) + +#define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) +#define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) + +#define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) +#define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) +#define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) + +#define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP) +#define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP) +#define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \ + SYM_MASK(IBCCtrlB_0, HRTBT_ENB)) +#define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \ + SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) +#define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) + +#define IBA7322_REDIRECT_VEC_PER_REG 12 + +#define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) +#define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) +#define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) +#define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) +#define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) + +#define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ + +#define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ + .msg = #fldname } +#define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ + fldname##Mask##_##port), .msg = #fldname } +static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { + HWE_AUTO_P(IBSerdesPClkNotDetect, 1), + HWE_AUTO_P(IBSerdesPClkNotDetect, 0), + HWE_AUTO(PCIESerdesPClkNotDetect), + HWE_AUTO(PowerOnBISTFailed), + HWE_AUTO(TempsenseTholdReached), + HWE_AUTO(MemoryErr), + HWE_AUTO(PCIeBusParityErr), + HWE_AUTO(PcieCplTimeout), + HWE_AUTO(PciePoisonedTLP), + HWE_AUTO_P(SDmaMemReadErr, 1), + HWE_AUTO_P(SDmaMemReadErr, 0), + HWE_AUTO_P(IBCBusFromSPCParityErr, 1), + HWE_AUTO_P(IBCBusFromSPCParityErr, 0), + HWE_AUTO_P(statusValidNoEop, 1), + HWE_AUTO_P(statusValidNoEop, 0), + HWE_AUTO(LATriggered), + { .mask = 0 } +}; + +#define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ + .msg = #fldname } +#define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ + .msg = #fldname } +static const struct qib_hwerror_msgs qib_7322error_msgs[] = { + E_AUTO(ResetNegated), + E_AUTO(HardwareErr), + E_AUTO(InvalidAddrErr), + E_AUTO(SDmaVL15Err), + E_AUTO(SBufVL15MisUseErr), + E_AUTO(InvalidEEPCmd), + E_AUTO(RcvContextShareErr), + E_AUTO(SendVLMismatchErr), + E_AUTO(SendArmLaunchErr), + E_AUTO(SendSpecialTriggerErr), + E_AUTO(SDmaWrongPortErr), + E_AUTO(SDmaBufMaskDuplicateErr), + E_AUTO(RcvHdrFullErr), + E_AUTO(RcvEgrFullErr), + { .mask = 0 } +}; + +static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { + E_P_AUTO(IBStatusChanged), + E_P_AUTO(SHeadersErr), + E_P_AUTO(VL15BufMisuseErr), + /* + * SDmaHaltErr is not really an error, make it clearer; + */ + {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted"}, + E_P_AUTO(SDmaDescAddrMisalignErr), + E_P_AUTO(SDmaUnexpDataErr), + E_P_AUTO(SDmaMissingDwErr), + E_P_AUTO(SDmaDwEnErr), + E_P_AUTO(SDmaRpyTagErr), + E_P_AUTO(SDma1stDescErr), + E_P_AUTO(SDmaBaseErr), + E_P_AUTO(SDmaTailOutOfBoundErr), + E_P_AUTO(SDmaOutOfBoundErr), + E_P_AUTO(SDmaGenMismatchErr), + E_P_AUTO(SendBufMisuseErr), + E_P_AUTO(SendUnsupportedVLErr), + E_P_AUTO(SendUnexpectedPktNumErr), + E_P_AUTO(SendDroppedDataPktErr), + E_P_AUTO(SendDroppedSmpPktErr), + E_P_AUTO(SendPktLenErr), + E_P_AUTO(SendUnderRunErr), + E_P_AUTO(SendMaxPktLenErr), + E_P_AUTO(SendMinPktLenErr), + E_P_AUTO(RcvIBLostLinkErr), + E_P_AUTO(RcvHdrErr), + E_P_AUTO(RcvHdrLenErr), + E_P_AUTO(RcvBadTidErr), + E_P_AUTO(RcvBadVersionErr), + E_P_AUTO(RcvIBFlowErr), + E_P_AUTO(RcvEBPErr), + E_P_AUTO(RcvUnsupportedVLErr), + E_P_AUTO(RcvUnexpectedCharErr), + E_P_AUTO(RcvShortPktLenErr), + E_P_AUTO(RcvLongPktLenErr), + E_P_AUTO(RcvMaxPktLenErr), + E_P_AUTO(RcvMinPktLenErr), + E_P_AUTO(RcvICRCErr), + E_P_AUTO(RcvVCRCErr), + E_P_AUTO(RcvFormatErr), + { .mask = 0 } +}; + +/* + * Below generates "auto-message" for interrupts not specific to any port or + * context + */ +#define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ + .msg = #fldname } +/* Below generates "auto-message" for interrupts specific to a port */ +#define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ + SYM_LSB(IntMask, fldname##Mask##_0), \ + SYM_LSB(IntMask, fldname##Mask##_1)), \ + .msg = #fldname "_P" } +/* For some reason, the SerDesTrimDone bits are reversed */ +#define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ + SYM_LSB(IntMask, fldname##Mask##_1), \ + SYM_LSB(IntMask, fldname##Mask##_0)), \ + .msg = #fldname "_P" } +/* + * Below generates "auto-message" for interrupts specific to a context, + * with ctxt-number appended + */ +#define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ + SYM_LSB(IntMask, fldname##0IntMask), \ + SYM_LSB(IntMask, fldname##17IntMask)), \ + .msg = #fldname "_C"} + +static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = { + INTR_AUTO_P(SDmaInt), + INTR_AUTO_P(SDmaProgressInt), + INTR_AUTO_P(SDmaIdleInt), + INTR_AUTO_P(SDmaCleanupDone), + INTR_AUTO_C(RcvUrg), + INTR_AUTO_P(ErrInt), + INTR_AUTO(ErrInt), /* non-port-specific errs */ + INTR_AUTO(AssertGPIOInt), + INTR_AUTO_P(SendDoneInt), + INTR_AUTO(SendBufAvailInt), + INTR_AUTO_C(RcvAvail), + { .mask = 0 } +}; + +#define TXSYMPTOM_AUTO_P(fldname) \ + { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), .msg = #fldname } +static const struct qib_hwerror_msgs hdrchk_msgs[] = { + TXSYMPTOM_AUTO_P(NonKeyPacket), + TXSYMPTOM_AUTO_P(GRHFail), + TXSYMPTOM_AUTO_P(PkeyFail), + TXSYMPTOM_AUTO_P(QPFail), + TXSYMPTOM_AUTO_P(SLIDFail), + TXSYMPTOM_AUTO_P(RawIPV6), + TXSYMPTOM_AUTO_P(PacketTooSmall), + { .mask = 0 } +}; + +#define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ + +/* + * Called when we might have an error that is specific to a particular + * PIO buffer, and may need to cancel that buffer, so it can be re-used, + * because we don't need to force the update of pioavail + */ +static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u32 i; + int any; + u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; + u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; + unsigned long sbuf[4]; + + /* + * It's possible that sendbuffererror could have bits set; might + * have already done this as a result of hardware error handling. + */ + any = 0; + for (i = 0; i < regcnt; ++i) { + sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); + if (sbuf[i]) { + any = 1; + qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); + } + } + + if (any) + qib_disarm_piobufs_set(dd, sbuf, piobcnt); +} + +/* No txe_recover yet, if ever */ + +/* No decode__errors yet */ +static void err_decode(char *msg, size_t len, u64 errs, + const struct qib_hwerror_msgs *msp) +{ + u64 these, lmask; + int took, multi, n = 0; + + while (msp && msp->mask) { + multi = (msp->mask & (msp->mask - 1)); + while (errs & msp->mask) { + these = (errs & msp->mask); + lmask = (these & (these - 1)) ^ these; + if (len) { + if (n++) { + /* separate the strings */ + *msg++ = ','; + len--; + } + took = scnprintf(msg, len, "%s", msp->msg); + len -= took; + msg += took; + } + errs &= ~lmask; + if (len && multi) { + /* More than one bit this mask */ + int idx = -1; + + while (lmask & msp->mask) { + ++idx; + lmask >>= 1; + } + took = scnprintf(msg, len, "_%d", idx); + len -= took; + msg += took; + } + } + ++msp; + } + /* If some bits are left, show in hex. */ + if (len && errs) + snprintf(msg, len, "%sMORE:%llX", n ? "," : "", + (unsigned long long) errs); +} + +/* only called if r1 set */ +static void flush_fifo(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u32 __iomem *piobuf; + u32 bufn; + u32 *hdr; + u64 pbc; + const unsigned hdrwords = 7; + static struct qib_ib_header ibhdr = { + .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), + .lrh[1] = IB_LID_PERMISSIVE, + .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), + .lrh[3] = IB_LID_PERMISSIVE, + .u.oth.bth[0] = cpu_to_be32( + (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), + .u.oth.bth[1] = cpu_to_be32(0), + .u.oth.bth[2] = cpu_to_be32(0), + .u.oth.u.ud.deth[0] = cpu_to_be32(0), + .u.oth.u.ud.deth[1] = cpu_to_be32(0), + }; + + /* + * Send a dummy VL15 packet to flush the launch FIFO. + * This will not actually be sent since the TxeBypassIbc bit is set. + */ + pbc = PBC_7322_VL15_SEND | + (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | + (hdrwords + SIZE_OF_CRC); + piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); + if (!piobuf) + return; + writeq(pbc, piobuf); + hdr = (u32 *) &ibhdr; + if (dd->flags & QIB_PIO_FLUSH_WC) { + qib_flush_wc(); + qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); + qib_flush_wc(); + __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); + qib_flush_wc(); + } else + qib_pio_copy(piobuf + 2, hdr, hdrwords); + qib_sendbuf_done(dd, bufn); +} + +/* + * This is called with interrupts disabled and sdma_lock held. + */ +static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) +{ + struct qib_devdata *dd = ppd->dd; + u64 set_sendctrl = 0; + u64 clr_sendctrl = 0; + + if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) + set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); + else + clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); + + if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) + set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); + else + clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); + + if (op & QIB_SDMA_SENDCTRL_OP_HALT) + set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); + else + clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); + + if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) + set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | + SYM_MASK(SendCtrl_0, TxeAbortIbc) | + SYM_MASK(SendCtrl_0, TxeDrainRmFifo); + else + clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | + SYM_MASK(SendCtrl_0, TxeAbortIbc) | + SYM_MASK(SendCtrl_0, TxeDrainRmFifo); + + spin_lock(&dd->sendctrl_lock); + + /* If we are draining everything, block sends first */ + if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { + ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); + qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + ppd->p_sendctrl |= set_sendctrl; + ppd->p_sendctrl &= ~clr_sendctrl; + + if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) + qib_write_kreg_port(ppd, krp_sendctrl, + ppd->p_sendctrl | + SYM_MASK(SendCtrl_0, SDmaCleanup)); + else + qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + + if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { + ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); + qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + spin_unlock(&dd->sendctrl_lock); + + if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) + flush_fifo(ppd); +} + +static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) +{ + __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); +} + +static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) +{ + /* + * Set SendDmaLenGen and clear and set + * the MSB of the generation count to enable generation checking + * and load the internal generation counter. + */ + qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); + qib_write_kreg_port(ppd, krp_senddmalengen, + ppd->sdma_descq_cnt | + (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); +} + +/* + * Must be called with sdma_lock held, or before init finished. + */ +static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) +{ + /* Commit writes to memory and advance the tail on the chip */ + wmb(); + ppd->sdma_descq_tail = tail; + qib_write_kreg_port(ppd, krp_senddmatail, tail); +} + +/* + * This is called with interrupts disabled and sdma_lock held. + */ +static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) +{ + /* + * Drain all FIFOs. + * The hardware doesn't require this but we do it so that verbs + * and user applications don't wait for link active to send stale + * data. + */ + sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); + + qib_sdma_7322_setlengen(ppd); + qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ + ppd->sdma_head_dma[0] = 0; + qib_7322_sdma_sendctrl(ppd, + ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); +} + +#define DISABLES_SDMA ( \ + QIB_E_P_SDMAHALT | \ + QIB_E_P_SDMADESCADDRMISALIGN | \ + QIB_E_P_SDMAMISSINGDW | \ + QIB_E_P_SDMADWEN | \ + QIB_E_P_SDMARPYTAG | \ + QIB_E_P_SDMA1STDESC | \ + QIB_E_P_SDMABASE | \ + QIB_E_P_SDMATAILOUTOFBOUND | \ + QIB_E_P_SDMAOUTOFBOUND | \ + QIB_E_P_SDMAGENMISMATCH) + +static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) +{ + unsigned long flags; + struct qib_devdata *dd = ppd->dd; + + errs &= QIB_E_P_SDMAERRS; + + if (errs & QIB_E_P_SDMAUNEXPDATA) + qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, + ppd->port); + + spin_lock_irqsave(&ppd->sdma_lock, flags); + + switch (ppd->sdma_state.current_state) { + case qib_sdma_state_s00_hw_down: + break; + + case qib_sdma_state_s10_hw_start_up_wait: + if (errs & QIB_E_P_SDMAHALT) + __qib_sdma_process_event(ppd, + qib_sdma_event_e20_hw_started); + break; + + case qib_sdma_state_s20_idle: + break; + + case qib_sdma_state_s30_sw_clean_up_wait: + break; + + case qib_sdma_state_s40_hw_clean_up_wait: + if (errs & QIB_E_P_SDMAHALT) + __qib_sdma_process_event(ppd, + qib_sdma_event_e50_hw_cleaned); + break; + + case qib_sdma_state_s50_hw_halt_wait: + if (errs & QIB_E_P_SDMAHALT) + __qib_sdma_process_event(ppd, + qib_sdma_event_e60_hw_halted); + break; + + case qib_sdma_state_s99_running: + __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); + __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); + break; + } + + spin_unlock_irqrestore(&ppd->sdma_lock, flags); +} + +/* + * handle per-device errors (not per-port errors) + */ +static noinline void handle_7322_errors(struct qib_devdata *dd) +{ + char *msg; + u64 iserr = 0; + u64 errs; + u64 mask; + int log_idx; + + qib_stats.sps_errints++; + errs = qib_read_kreg64(dd, kr_errstatus); + if (!errs) { + qib_devinfo(dd->pcidev, "device error interrupt, " + "but no error bits set!\n"); + goto done; + } + + /* don't report errors that are masked */ + errs &= dd->cspec->errormask; + msg = dd->cspec->emsgbuf; + + /* do these first, they are most important */ + if (errs & QIB_E_HARDWARE) { + *msg = '\0'; + qib_7322_handle_hwerrors(dd, msg, sizeof dd->cspec->emsgbuf); + } else + for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx) + if (errs & dd->eep_st_masks[log_idx].errs_to_log) + qib_inc_eeprom_err(dd, log_idx, 1); + + if (errs & QIB_E_SPKTERRS) { + qib_disarm_7322_senderrbufs(dd->pport); + qib_stats.sps_txerrs++; + } else if (errs & QIB_E_INVALIDADDR) + qib_stats.sps_txerrs++; + else if (errs & QIB_E_ARMLAUNCH) { + qib_stats.sps_txerrs++; + qib_disarm_7322_senderrbufs(dd->pport); + } + qib_write_kreg(dd, kr_errclear, errs); + + /* + * The ones we mask off are handled specially below + * or above. Also mask SDMADISABLED by default as it + * is too chatty. + */ + mask = QIB_E_HARDWARE; + *msg = '\0'; + + err_decode(msg, sizeof dd->cspec->emsgbuf, errs & ~mask, + qib_7322error_msgs); + + /* + * Getting reset is a tragedy for all ports. Mark the device + * _and_ the ports as "offline" in way meaningful to each. + */ + if (errs & QIB_E_RESET) { + int pidx; + + qib_dev_err(dd, "Got reset, requires re-init " + "(unload and reload driver)\n"); + dd->flags &= ~QIB_INITTED; /* needs re-init */ + /* mark as having had error */ + *dd->devstatusp |= QIB_STATUS_HWERROR; + for (pidx = 0; pidx < dd->num_pports; ++pidx) + if (dd->pport[pidx].link_speed_supported) + *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; + } + + if (*msg && iserr) + qib_dev_err(dd, "%s error\n", msg); + + /* + * If there were hdrq or egrfull errors, wake up any processes + * waiting in poll. We used to try to check which contexts had + * the overflow, but given the cost of that and the chip reads + * to support it, it's better to just wake everybody up if we + * get an overflow; waiters can poll again if it's not them. + */ + if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { + qib_handle_urcv(dd, ~0U); + if (errs & ERR_MASK(RcvEgrFullErr)) + qib_stats.sps_buffull++; + else + qib_stats.sps_hdrfull++; + } + +done: + return; +} + +static void reenable_chase(unsigned long opaque) +{ + struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; + + ppd->cpspec->chase_timer.expires = 0; + qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, + QLOGIC_IB_IBCC_LINKINITCMD_POLL); +} + +static void disable_chase(struct qib_pportdata *ppd, u64 tnow, u8 ibclt) +{ + ppd->cpspec->chase_end = 0; + + if (!qib_chase) + return; + + qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; + add_timer(&ppd->cpspec->chase_timer); +} + +static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) +{ + u8 ibclt; + u64 tnow; + + ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); + + /* + * Detect and handle the state chase issue, where we can + * get stuck if we are unlucky on timing on both sides of + * the link. If we are, we disable, set a timer, and + * then re-enable. + */ + switch (ibclt) { + case IB_7322_LT_STATE_CFGRCVFCFG: + case IB_7322_LT_STATE_CFGWAITRMT: + case IB_7322_LT_STATE_TXREVLANES: + case IB_7322_LT_STATE_CFGENH: + tnow = get_jiffies_64(); + if (ppd->cpspec->chase_end && + time_after64(tnow, ppd->cpspec->chase_end)) + disable_chase(ppd, tnow, ibclt); + else if (!ppd->cpspec->chase_end) + ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; + break; + default: + ppd->cpspec->chase_end = 0; + break; + } + + if (ibclt == IB_7322_LT_STATE_CFGTEST && + (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { + force_h1(ppd); + ppd->cpspec->qdr_reforce = 1; + } else if (ppd->cpspec->qdr_reforce && + (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && + (ibclt == IB_7322_LT_STATE_CFGENH || + ibclt == IB_7322_LT_STATE_CFGIDLE || + ibclt == IB_7322_LT_STATE_LINKUP)) + force_h1(ppd); + + if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && + ppd->link_speed_enabled == QIB_IB_QDR && + (ibclt == IB_7322_LT_STATE_CFGTEST || + ibclt == IB_7322_LT_STATE_CFGENH || + (ibclt >= IB_7322_LT_STATE_POLLACTIVE && + ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) + adj_tx_serdes(ppd); + + if (!ppd->cpspec->qdr_dfe_on && ibclt != IB_7322_LT_STATE_LINKUP && + ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { + ppd->cpspec->qdr_dfe_on = 1; + ppd->cpspec->qdr_dfe_time = 0; + /* On link down, reenable QDR adaptation */ + qib_write_kreg_port(ppd, krp_static_adapt_dis(2), + ppd->dd->cspec->r1 ? + QDR_STATIC_ADAPT_DOWN_R1 : + QDR_STATIC_ADAPT_DOWN); + } +} + +/* + * This is per-pport error handling. + * will likely get it's own MSIx interrupt (one for each port, + * although just a single handler). + */ +static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) +{ + char *msg; + u64 ignore_this_time = 0, iserr = 0, errs, fmask; + struct qib_devdata *dd = ppd->dd; + + /* do this as soon as possible */ + fmask = qib_read_kreg64(dd, kr_act_fmask); + if (!fmask) + check_7322_rxe_status(ppd); + + errs = qib_read_kreg_port(ppd, krp_errstatus); + if (!errs) + qib_devinfo(dd->pcidev, + "Port%d error interrupt, but no error bits set!\n", + ppd->port); + if (!fmask) + errs &= ~QIB_E_P_IBSTATUSCHANGED; + if (!errs) + goto done; + + msg = ppd->cpspec->epmsgbuf; + *msg = '\0'; + + if (errs & ~QIB_E_P_BITSEXTANT) { + err_decode(msg, sizeof ppd->cpspec->epmsgbuf, + errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); + if (!*msg) + snprintf(msg, sizeof ppd->cpspec->epmsgbuf, + "no others"); + qib_dev_porterr(dd, ppd->port, "error interrupt with unknown" + " errors 0x%016Lx set (and %s)\n", + (errs & ~QIB_E_P_BITSEXTANT), msg); + *msg = '\0'; + } + + if (errs & QIB_E_P_SHDR) { + u64 symptom; + + /* determine cause, then write to clear */ + symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); + qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); + err_decode(msg, sizeof ppd->cpspec->epmsgbuf, symptom, + hdrchk_msgs); + *msg = '\0'; + /* senderrbuf cleared in SPKTERRS below */ + } + + if (errs & QIB_E_P_SPKTERRS) { + if ((errs & QIB_E_P_LINK_PKTERRS) && + !(ppd->lflags & QIBL_LINKACTIVE)) { + /* + * This can happen when trying to bring the link + * up, but the IB link changes state at the "wrong" + * time. The IB logic then complains that the packet + * isn't valid. We don't want to confuse people, so + * we just don't print them, except at debug + */ + err_decode(msg, sizeof ppd->cpspec->epmsgbuf, + (errs & QIB_E_P_LINK_PKTERRS), + qib_7322p_error_msgs); + *msg = '\0'; + ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; + } + qib_disarm_7322_senderrbufs(ppd); + } else if ((errs & QIB_E_P_LINK_PKTERRS) && + !(ppd->lflags & QIBL_LINKACTIVE)) { + /* + * This can happen when SMA is trying to bring the link + * up, but the IB link changes state at the "wrong" time. + * The IB logic then complains that the packet isn't + * valid. We don't want to confuse people, so we just + * don't print them, except at debug + */ + err_decode(msg, sizeof ppd->cpspec->epmsgbuf, errs, + qib_7322p_error_msgs); + ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; + *msg = '\0'; + } + + qib_write_kreg_port(ppd, krp_errclear, errs); + + errs &= ~ignore_this_time; + if (!errs) + goto done; + + if (errs & QIB_E_P_RPKTERRS) + qib_stats.sps_rcverrs++; + if (errs & QIB_E_P_SPKTERRS) + qib_stats.sps_txerrs++; + + iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); + + if (errs & QIB_E_P_SDMAERRS) + sdma_7322_p_errors(ppd, errs); + + if (errs & QIB_E_P_IBSTATUSCHANGED) { + u64 ibcs; + u8 ltstate; + + ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); + ltstate = qib_7322_phys_portstate(ibcs); + + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) + handle_serdes_issues(ppd, ibcs); + if (!(ppd->cpspec->ibcctrl_a & + SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { + /* + * We got our interrupt, so init code should be + * happy and not try alternatives. Now squelch + * other "chatter" from link-negotiation (pre Init) + */ + ppd->cpspec->ibcctrl_a |= + SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a); + } + + /* Update our picture of width and speed from chip */ + ppd->link_width_active = + (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? + IB_WIDTH_4X : IB_WIDTH_1X; + ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, + LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & + SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? + QIB_IB_DDR : QIB_IB_SDR; + + if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != + IB_PHYSPORTSTATE_DISABLED) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + else + /* + * Since going into a recovery state causes the link + * state to go down and since recovery is transitory, + * it is better if we "miss" ever seeing the link + * training state go into recovery (i.e., ignore this + * transition for link state special handling purposes) + * without updating lastibcstat. + */ + if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && + ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && + ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && + ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) + qib_handle_e_ibstatuschanged(ppd, ibcs); + } + if (*msg && iserr) + qib_dev_porterr(dd, ppd->port, "%s error\n", msg); + + if (ppd->state_wanted & ppd->lflags) + wake_up_interruptible(&ppd->state_wait); +done: + return; +} + +/* enable/disable chip from delivering interrupts */ +static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) +{ + if (enable) { + if (dd->flags & QIB_BADINTR) + return; + qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); + /* cause any pending enabled interrupts to be re-delivered */ + qib_write_kreg(dd, kr_intclear, 0ULL); + if (dd->cspec->num_msix_entries) { + /* and same for MSIx */ + u64 val = qib_read_kreg64(dd, kr_intgranted); + if (val) + qib_write_kreg(dd, kr_intgranted, val); + } + } else + qib_write_kreg(dd, kr_intmask, 0ULL); +} + +/* + * Try to cleanup as much as possible for anything that might have gone + * wrong while in freeze mode, such as pio buffers being written by user + * processes (causing armlaunch), send errors due to going into freeze mode, + * etc., and try to avoid causing extra interrupts while doing so. + * Forcibly update the in-memory pioavail register copies after cleanup + * because the chip won't do it while in freeze mode (the register values + * themselves are kept correct). + * Make sure that we don't lose any important interrupts by using the chip + * feature that says that writing 0 to a bit in *clear that is set in + * *status will cause an interrupt to be generated again (if allowed by + * the *mask value). + * This is in chip-specific code because of all of the register accesses, + * even though the details are similar on most chips. + */ +static void qib_7322_clear_freeze(struct qib_devdata *dd) +{ + int pidx; + + /* disable error interrupts, to avoid confusion */ + qib_write_kreg(dd, kr_errmask, 0ULL); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) + if (dd->pport[pidx].link_speed_supported) + qib_write_kreg_port(dd->pport + pidx, krp_errmask, + 0ULL); + + /* also disable interrupts; errormask is sometimes overwriten */ + qib_7322_set_intr_state(dd, 0); + + /* clear the freeze, and be sure chip saw it */ + qib_write_kreg(dd, kr_control, dd->control); + qib_read_kreg32(dd, kr_scratch); + + /* + * Force new interrupt if any hwerr, error or interrupt bits are + * still set, and clear "safe" send packet errors related to freeze + * and cancelling sends. Re-enable error interrupts before possible + * force of re-interrupt on pending interrupts. + */ + qib_write_kreg(dd, kr_hwerrclear, 0ULL); + qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); + qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); + /* We need to purge per-port errs and reset mask, too */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + if (!dd->pport[pidx].link_speed_supported) + continue; + qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); + qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); + } + qib_7322_set_intr_state(dd, 1); +} + +/* no error handling to speak of */ +/** + * qib_7322_handle_hwerrors - display hardware errors. + * @dd: the qlogic_ib device + * @msg: the output buffer + * @msgl: the size of the output buffer + * + * Use same msg buffer as regular errors to avoid excessive stack + * use. Most hardware errors are catastrophic, but for right now, + * we'll print them and continue. We reuse the same message buffer as + * qib_handle_errors() to avoid excessive stack usage. + */ +static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, + size_t msgl) +{ + u64 hwerrs; + u32 ctrl; + int isfatal = 0; + + hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); + if (!hwerrs) + goto bail; + if (hwerrs == ~0ULL) { + qib_dev_err(dd, "Read of hardware error status failed " + "(all bits set); ignoring\n"); + goto bail; + } + qib_stats.sps_hwerrs++; + + /* Always clear the error status register, except BIST fail */ + qib_write_kreg(dd, kr_hwerrclear, hwerrs & + ~HWE_MASK(PowerOnBISTFailed)); + + hwerrs &= dd->cspec->hwerrmask; + + /* no EEPROM logging, yet */ + + if (hwerrs) + qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx " + "(cleared)\n", (unsigned long long) hwerrs); + + ctrl = qib_read_kreg32(dd, kr_control); + if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { + /* + * No recovery yet... + */ + if ((hwerrs & ~HWE_MASK(LATriggered)) || + dd->cspec->stay_in_freeze) { + /* + * If any set that we aren't ignoring only make the + * complaint once, in case it's stuck or recurring, + * and we get here multiple times + * Force link down, so switch knows, and + * LEDs are turned off. + */ + if (dd->flags & QIB_INITTED) + isfatal = 1; + } else + qib_7322_clear_freeze(dd); + } + + if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { + isfatal = 1; + strlcpy(msg, "[Memory BIST test failed, " + "InfiniPath hardware unusable]", msgl); + /* ignore from now on, so disable until driver reloaded */ + dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); + + /* Ignore esoteric PLL failures et al. */ + + qib_dev_err(dd, "%s hardware error\n", msg); + + if (isfatal && !dd->diag_client) { + qib_dev_err(dd, "Fatal Hardware Error, no longer" + " usable, SN %.16s\n", dd->serial); + /* + * for /sys status file and user programs to print; if no + * trailing brace is copied, we'll know it was truncated. + */ + if (dd->freezemsg) + snprintf(dd->freezemsg, dd->freezelen, + "{%s}", msg); + qib_disable_after_error(dd); + } +bail:; +} + +/** + * qib_7322_init_hwerrors - enable hardware errors + * @dd: the qlogic_ib device + * + * now that we have finished initializing everything that might reasonably + * cause a hardware error, and cleared those errors bits as they occur, + * we can enable hardware errors in the mask (potentially enabling + * freeze mode), and enable hardware errors as errors (along with + * everything else) in errormask + */ +static void qib_7322_init_hwerrors(struct qib_devdata *dd) +{ + int pidx; + u64 extsval; + + extsval = qib_read_kreg64(dd, kr_extstatus); + if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | + QIB_EXTS_MEMBIST_ENDTEST))) + qib_dev_err(dd, "MemBIST did not complete!\n"); + + /* never clear BIST failure, so reported on each driver load */ + qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + + /* clear all */ + qib_write_kreg(dd, kr_errclear, ~0ULL); + /* enable errors that are masked, at least this first time. */ + qib_write_kreg(dd, kr_errmask, ~0ULL); + dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); + for (pidx = 0; pidx < dd->num_pports; ++pidx) + if (dd->pport[pidx].link_speed_supported) + qib_write_kreg_port(dd->pport + pidx, krp_errmask, + ~0ULL); +} + +/* + * Disable and enable the armlaunch error. Used for PIO bandwidth testing + * on chips that are count-based, rather than trigger-based. There is no + * reference counting, but that's also fine, given the intended use. + * Only chip-specific because it's all register accesses + */ +static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) +{ + if (enable) { + qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); + dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; + } else + dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; + qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); +} + +/* + * Formerly took parameter <which> in pre-shifted, + * pre-merged form with LinkCmd and LinkInitCmd + * together, and assuming the zero was NOP. + */ +static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, + u16 linitcmd) +{ + u64 mod_wd; + struct qib_devdata *dd = ppd->dd; + unsigned long flags; + + if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { + /* + * If we are told to disable, note that so link-recovery + * code does not attempt to bring us back up. + * Also reset everything that we can, so we start + * completely clean when re-enabled (before we + * actually issue the disable to the IBC) + */ + qib_7322_mini_pcs_reset(ppd); + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { + /* + * Any other linkinitcmd will lead to LINKDOWN and then + * to INIT (if all is well), so clear flag to let + * link-recovery code attempt to bring us back up. + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + /* + * Clear status change interrupt reduction so the + * new state is seen. + */ + ppd->cpspec->ibcctrl_a &= + ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); + } + + mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | + (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + + qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | + mod_wd); + /* write to chip to prevent back-to-back writes of ibc reg */ + qib_write_kreg(dd, kr_scratch, 0); + +} + +/* + * The total RCV buffer memory is 64KB, used for both ports, and is + * in units of 64 bytes (same as IB flow control credit unit). + * The consumedVL unit in the same registers are in 32 byte units! + * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, + * and we can therefore allocate just 9 IB credits for 2 VL15 packets + * in krp_rxcreditvl15, rather than 10. + */ +#define RCV_BUF_UNITSZ 64 +#define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) + +static void set_vls(struct qib_pportdata *ppd) +{ + int i, numvls, totcred, cred_vl, vl0extra; + struct qib_devdata *dd = ppd->dd; + u64 val; + + numvls = qib_num_vls(ppd->vls_operational); + + /* + * Set up per-VL credits. Below is kluge based on these assumptions: + * 1) port is disabled at the time early_init is called. + * 2) give VL15 17 credits, for two max-plausible packets. + * 3) Give VL0-N the rest, with any rounding excess used for VL0 + */ + /* 2 VL15 packets @ 288 bytes each (including IB headers) */ + totcred = NUM_RCV_BUF_UNITS(dd); + cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; + totcred -= cred_vl; + qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); + cred_vl = totcred / numvls; + vl0extra = totcred - cred_vl * numvls; + qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); + for (i = 1; i < numvls; i++) + qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); + for (; i < 8; i++) /* no buffer space for other VLs */ + qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); + + /* Notify IBC that credits need to be recalculated */ + val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); + val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); + qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); + qib_write_kreg(dd, kr_scratch, 0ULL); + val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); + qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); + + for (i = 0; i < numvls; i++) + val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); + val = qib_read_kreg_port(ppd, krp_rxcreditvl15); + + /* Change the number of operational VLs */ + ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & + ~SYM_MASK(IBCCtrlA_0, NumVLane)) | + ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); + qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); +} + +/* + * The code that deals with actual SerDes is in serdes_7322_init(). + * Compared to the code for iba7220, it is minimal. + */ +static int serdes_7322_init(struct qib_pportdata *ppd); + +/** + * qib_7322_bringup_serdes - bring up the serdes + * @ppd: physical port on the qlogic_ib device + */ +static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u64 val, guid, ibc; + unsigned long flags; + int ret = 0; + + /* + * SerDes model not in Pd, but still need to + * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere + * eventually. + */ + /* Put IBC in reset, sends disabled (should be in reset already) */ + ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); + qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); + + if (qib_compat_ddr_negotiate) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, + crp_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, + crp_iblinkerrrecov); + } + + /* flowcontrolwatermark is in units of KBytes */ + ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); + /* + * Flow control is sent this often, even if no changes in + * buffer space occur. Units are 128ns for this chip. + * Set to 3usec. + */ + ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); + /* max error tolerance */ + ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); + /* IB credit flow control. */ + ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); + /* + * set initial max size pkt IBC will send, including ICRC; it's the + * PIO buffer size in dwords, less 1; also see qib_set_mtu() + */ + ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << + SYM_LSB(IBCCtrlA_0, MaxPktLen); + ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ + + /* initially come up waiting for TS1, without sending anything. */ + val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << + QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + + /* + * Reset the PCS interface to the serdes (and also ibc, which is still + * in reset from above). Writes new value of ibcctrl_a as last step. + */ + qib_7322_mini_pcs_reset(ppd); + qib_write_kreg(dd, kr_scratch, 0ULL); + + if (!ppd->cpspec->ibcctrl_b) { + unsigned lse = ppd->link_speed_enabled; + + /* + * Not on re-init after reset, establish shadow + * and force initial config. + */ + ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, + krp_ibcctrl_b); + ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | + IBA7322_IBC_SPEED_DDR | + IBA7322_IBC_SPEED_SDR | + IBA7322_IBC_WIDTH_AUTONEG | + SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); + if (lse & (lse - 1)) /* Muliple speeds enabled */ + ppd->cpspec->ibcctrl_b |= + (lse << IBA7322_IBC_SPEED_LSB) | + IBA7322_IBC_IBTA_1_2_MASK | + IBA7322_IBC_MAX_SPEED_MASK; + else + ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? + IBA7322_IBC_SPEED_QDR | + IBA7322_IBC_IBTA_1_2_MASK : + (lse == QIB_IB_DDR) ? + IBA7322_IBC_SPEED_DDR : + IBA7322_IBC_SPEED_SDR; + if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == + (IB_WIDTH_1X | IB_WIDTH_4X)) + ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; + else + ppd->cpspec->ibcctrl_b |= + ppd->link_width_enabled == IB_WIDTH_4X ? + IBA7322_IBC_WIDTH_4X_ONLY : + IBA7322_IBC_WIDTH_1X_ONLY; + + /* always enable these on driver reload, not sticky */ + ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | + IBA7322_IBC_HRTBT_MASK); + } + qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); + + /* setup so we have more time at CFGTEST to change H1 */ + val = qib_read_kreg_port(ppd, krp_ibcctrl_c); + val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); + val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); + qib_write_kreg_port(ppd, krp_ibcctrl_c, val); + + serdes_7322_init(ppd); + + guid = be64_to_cpu(ppd->guid); + if (!guid) { + if (dd->base_guid) + guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; + ppd->guid = cpu_to_be64(guid); + } + + qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); + /* write to chip to prevent back-to-back writes of ibc reg */ + qib_write_kreg(dd, kr_scratch, 0); + + /* Enable port */ + ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); + set_vls(ppd); + + /* be paranoid against later code motion, etc. */ + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); + qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); + + /* Also enable IBSTATUSCHG interrupt. */ + val = qib_read_kreg_port(ppd, krp_errmask); + qib_write_kreg_port(ppd, krp_errmask, + val | ERR_MASK_N(IBStatusChanged)); + + /* Always zero until we start messing with SerDes for real */ + return ret; +} + +/** + * qib_7322_quiet_serdes - set serdes to txidle + * @dd: the qlogic_ib device + * Called when driver is being unloaded + */ +static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) +{ + u64 val; + unsigned long flags; + + qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + wake_up(&ppd->cpspec->autoneg_wait); + cancel_delayed_work(&ppd->cpspec->autoneg_work); + if (ppd->dd->cspec->r1) + cancel_delayed_work(&ppd->cpspec->ipg_work); + flush_scheduled_work(); + + ppd->cpspec->chase_end = 0; + if (ppd->cpspec->chase_timer.data) /* if initted */ + del_timer_sync(&ppd->cpspec->chase_timer); + + /* + * Despite the name, actually disables IBC as well. Do it when + * we are as sure as possible that no more packets can be + * received, following the down and the PCS reset. + * The actual disabling happens in qib_7322_mini_pci_reset(), + * along with the PCS being reset. + */ + ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); + qib_7322_mini_pcs_reset(ppd); + + /* + * Update the adjusted counters so the adjustment persists + * across driver reload. + */ + if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || + ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { + struct qib_devdata *dd = ppd->dd; + u64 diagc; + + /* enable counter writes */ + diagc = qib_read_kreg64(dd, kr_hwdiagctrl); + qib_write_kreg(dd, kr_hwdiagctrl, + diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); + + if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { + val = read_7322_creg32_port(ppd, crp_ibsymbolerr); + if (ppd->cpspec->ibdeltainprog) + val -= val - ppd->cpspec->ibsymsnap; + val -= ppd->cpspec->ibsymdelta; + write_7322_creg_port(ppd, crp_ibsymbolerr, val); + } + if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { + val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); + if (ppd->cpspec->ibdeltainprog) + val -= val - ppd->cpspec->iblnkerrsnap; + val -= ppd->cpspec->iblnkerrdelta; + write_7322_creg_port(ppd, crp_iblinkerrrecov, val); + } + if (ppd->cpspec->iblnkdowndelta) { + val = read_7322_creg32_port(ppd, crp_iblinkdown); + val += ppd->cpspec->iblnkdowndelta; + write_7322_creg_port(ppd, crp_iblinkdown, val); + } + /* + * No need to save ibmalfdelta since IB perfcounters + * are cleared on driver reload. + */ + + /* and disable counter writes */ + qib_write_kreg(dd, kr_hwdiagctrl, diagc); + } +} + +/** + * qib_setup_7322_setextled - set the state of the two external LEDs + * @ppd: physical port on the qlogic_ib device + * @on: whether the link is up or not + * + * The exact combo of LEDs if on is true is determined by looking + * at the ibcstatus. + * + * These LEDs indicate the physical and logical state of IB link. + * For this chip (at least with recommended board pinouts), LED1 + * is Yellow (logical state) and LED2 is Green (physical state), + * + * Note: We try to match the Mellanox HCA LED behavior as best + * we can. Green indicates physical link state is OK (something is + * plugged in, and we can train). + * Amber indicates the link is logically up (ACTIVE). + * Mellanox further blinks the amber LED to indicate data packet + * activity, but we have no hardware support for that, so it would + * require waking up every 10-20 msecs and checking the counters + * on the chip, and then turning the LED off if appropriate. That's + * visible overhead, so not something we will do. + */ +static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) +{ + struct qib_devdata *dd = ppd->dd; + u64 extctl, ledblink = 0, val; + unsigned long flags; + int yel, grn; + + /* + * The diags use the LED to indicate diag info, so we leave + * the external LED alone when the diags are running. + */ + if (dd->diag_client) + return; + + /* Allow override of LED display for, e.g. Locating system in rack */ + if (ppd->led_override) { + grn = (ppd->led_override & QIB_LED_PHYS); + yel = (ppd->led_override & QIB_LED_LOG); + } else if (on) { + val = qib_read_kreg_port(ppd, krp_ibcstatus_a); + grn = qib_7322_phys_portstate(val) == + IB_PHYSPORTSTATE_LINKUP; + yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; + } else { + grn = 0; + yel = 0; + } + + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + extctl = dd->cspec->extctrl & (ppd->port == 1 ? + ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); + if (grn) { + extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; + /* + * Counts are in chip clock (4ns) periods. + * This is 1/16 sec (66.6ms) on, + * 3/16 sec (187.5 ms) off, with packets rcvd. + */ + ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | + ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); + } + if (yel) + extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; + dd->cspec->extctrl = extctl; + qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); + + if (ledblink) /* blink the LED on packet receive */ + qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); +} + +/* + * Disable MSIx interrupt if enabled, call generic MSIx code + * to cleanup, and clear pending MSIx interrupts. + * Used for fallback to INTx, after reset, and when MSIx setup fails. + */ +static void qib_7322_nomsix(struct qib_devdata *dd) +{ + u64 intgranted; + int n; + + dd->cspec->main_int_mask = ~0ULL; + n = dd->cspec->num_msix_entries; + if (n) { + int i; + + dd->cspec->num_msix_entries = 0; + for (i = 0; i < n; i++) + free_irq(dd->cspec->msix_entries[i].vector, + dd->cspec->msix_arg[i]); + qib_nomsix(dd); + } + /* make sure no MSIx interrupts are left pending */ + intgranted = qib_read_kreg64(dd, kr_intgranted); + if (intgranted) + qib_write_kreg(dd, kr_intgranted, intgranted); +} + +static void qib_7322_free_irq(struct qib_devdata *dd) +{ + if (dd->cspec->irq) { + free_irq(dd->cspec->irq, dd); + dd->cspec->irq = 0; + } + qib_7322_nomsix(dd); +} + +static void qib_setup_7322_cleanup(struct qib_devdata *dd) +{ + int i; + + qib_7322_free_irq(dd); + kfree(dd->cspec->cntrs); + kfree(dd->cspec->sendchkenable); + kfree(dd->cspec->sendgrhchk); + kfree(dd->cspec->sendibchk); + kfree(dd->cspec->msix_entries); + kfree(dd->cspec->msix_arg); + for (i = 0; i < dd->num_pports; i++) { + unsigned long flags; + u32 mask = QSFP_GPIO_MOD_PRS_N | + (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); + + kfree(dd->pport[i].cpspec->portcntrs); + if (dd->flags & QIB_HAS_QSFP) { + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + dd->cspec->gpio_mask &= ~mask; + qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); + qib_qsfp_deinit(&dd->pport[i].cpspec->qsfp_data); + } + if (dd->pport[i].ibport_data.smi_ah) + ib_destroy_ah(&dd->pport[i].ibport_data.smi_ah->ibah); + } +} + +/* handle SDMA interrupts */ +static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) +{ + struct qib_pportdata *ppd0 = &dd->pport[0]; + struct qib_pportdata *ppd1 = &dd->pport[1]; + u64 intr0 = istat & (INT_MASK_P(SDma, 0) | + INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); + u64 intr1 = istat & (INT_MASK_P(SDma, 1) | + INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); + + if (intr0) + qib_sdma_intr(ppd0); + if (intr1) + qib_sdma_intr(ppd1); + + if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) + qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); + if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) + qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); +} + +/* + * Set or clear the Send buffer available interrupt enable bit. + */ +static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) +{ + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if (needint) + dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); + else + dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0ULL); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); +} + +/* + * Somehow got an interrupt with reserved bits set in interrupt status. + * Print a message so we know it happened, then clear them. + * keep mainline interrupt handler cache-friendly + */ +static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) +{ + u64 kills; + char msg[128]; + + kills = istat & ~QIB_I_BITSEXTANT; + qib_dev_err(dd, "Clearing reserved interrupt(s) 0x%016llx:" + " %s\n", (unsigned long long) kills, msg); + qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); +} + +/* keep mainline interrupt handler cache-friendly */ +static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) +{ + u32 gpiostatus; + int handled = 0; + int pidx; + + /* + * Boards for this chip currently don't use GPIO interrupts, + * so clear by writing GPIOstatus to GPIOclear, and complain + * to developer. To avoid endless repeats, clear + * the bits in the mask, since there is some kind of + * programming error or chip problem. + */ + gpiostatus = qib_read_kreg32(dd, kr_gpio_status); + /* + * In theory, writing GPIOstatus to GPIOclear could + * have a bad side-effect on some diagnostic that wanted + * to poll for a status-change, but the various shadows + * make that problematic at best. Diags will just suppress + * all GPIO interrupts during such tests. + */ + qib_write_kreg(dd, kr_gpio_clear, gpiostatus); + /* + * Check for QSFP MOD_PRS changes + * only works for single port if IB1 != pidx1 + */ + for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); + ++pidx) { + struct qib_pportdata *ppd; + struct qib_qsfp_data *qd; + u32 mask; + if (!dd->pport[pidx].link_speed_supported) + continue; + mask = QSFP_GPIO_MOD_PRS_N; + ppd = dd->pport + pidx; + mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); + if (gpiostatus & dd->cspec->gpio_mask & mask) { + u64 pins; + qd = &ppd->cpspec->qsfp_data; + gpiostatus &= ~mask; + pins = qib_read_kreg64(dd, kr_extstatus); + pins >>= SYM_LSB(EXTStatus, GPIOIn); + if (!(pins & mask)) { + ++handled; + qd->t_insert = get_jiffies_64(); + schedule_work(&qd->work); + } + } + } + + if (gpiostatus && !handled) { + const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); + u32 gpio_irq = mask & gpiostatus; + + /* + * Clear any troublemakers, and update chip from shadow + */ + dd->cspec->gpio_mask &= ~gpio_irq; + qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); + } +} + +/* + * Handle errors and unusual events first, separate function + * to improve cache hits for fast path interrupt handling. + */ +static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) +{ + if (istat & ~QIB_I_BITSEXTANT) + unknown_7322_ibits(dd, istat); + if (istat & QIB_I_GPIO) + unknown_7322_gpio_intr(dd); + if (istat & QIB_I_C_ERROR) + handle_7322_errors(dd); + if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) + handle_7322_p_errors(dd->rcd[0]->ppd); + if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) + handle_7322_p_errors(dd->rcd[1]->ppd); +} + +/* + * Dynamically adjust the rcv int timeout for a context based on incoming + * packet rate. + */ +static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) +{ + struct qib_devdata *dd = rcd->dd; + u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; + + /* + * Dynamically adjust idle timeout on chip + * based on number of packets processed. + */ + if (npkts < rcv_int_count && timeout > 2) + timeout >>= 1; + else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) + timeout = min(timeout << 1, rcv_int_timeout); + else + return; + + dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; + qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); +} + +/* + * This is the main interrupt handler. + * It will normally only be used for low frequency interrupts but may + * have to handle all interrupts if INTx is enabled or fewer than normal + * MSIx interrupts were allocated. + * This routine should ignore the interrupt bits for any of the + * dedicated MSIx handlers. + */ +static irqreturn_t qib_7322intr(int irq, void *data) +{ + struct qib_devdata *dd = data; + irqreturn_t ret; + u64 istat; + u64 ctxtrbits; + u64 rmask; + unsigned i; + u32 npkts; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + ret = IRQ_HANDLED; + goto bail; + } + + istat = qib_read_kreg64(dd, kr_intstatus); + + if (unlikely(istat == ~0ULL)) { + qib_bad_intrstatus(dd); + qib_dev_err(dd, "Interrupt status all f's, skipping\n"); + /* don't know if it was our interrupt or not */ + ret = IRQ_NONE; + goto bail; + } + + istat &= dd->cspec->main_int_mask; + if (unlikely(!istat)) { + /* already handled, or shared and not us */ + ret = IRQ_NONE; + goto bail; + } + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* handle "errors" of various kinds first, device ahead of port */ + if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | + QIB_I_C_ERROR | INT_MASK_P(Err, 0) | + INT_MASK_P(Err, 1)))) + unlikely_7322_intr(dd, istat); + + /* + * Clear the interrupt bits we found set, relatively early, so we + * "know" know the chip will have seen this by the time we process + * the queue, and will re-interrupt if necessary. The processor + * itself won't take the interrupt again until we return. + */ + qib_write_kreg(dd, kr_intclear, istat); + + /* + * Handle kernel receive queues before checking for pio buffers + * available since receives can overflow; piobuf waiters can afford + * a few extra cycles, since they were waiting anyway. + */ + ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); + if (ctxtrbits) { + rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | + (1ULL << QIB_I_RCVURG_LSB); + for (i = 0; i < dd->first_user_ctxt; i++) { + if (ctxtrbits & rmask) { + ctxtrbits &= ~rmask; + if (dd->rcd[i]) { + qib_kreceive(dd->rcd[i], NULL, &npkts); + adjust_rcv_timeout(dd->rcd[i], npkts); + } + } + rmask <<= 1; + } + if (ctxtrbits) { + ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | + (ctxtrbits >> QIB_I_RCVURG_LSB); + qib_handle_urcv(dd, ctxtrbits); + } + } + + if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) + sdma_7322_intr(dd, istat); + + if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) + qib_ib_piobufavail(dd); + + ret = IRQ_HANDLED; +bail: + return ret; +} + +/* + * Dedicated receive packet available interrupt handler. + */ +static irqreturn_t qib_7322pintr(int irq, void *data) +{ + struct qib_ctxtdata *rcd = data; + struct qib_devdata *dd = rcd->dd; + u32 npkts; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + return IRQ_HANDLED; + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* Clear the interrupt bit we expect to be set. */ + qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | + (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); + + qib_kreceive(rcd, NULL, &npkts); + adjust_rcv_timeout(rcd, npkts); + + return IRQ_HANDLED; +} + +/* + * Dedicated Send buffer available interrupt handler. + */ +static irqreturn_t qib_7322bufavail(int irq, void *data) +{ + struct qib_devdata *dd = data; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + return IRQ_HANDLED; + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* Clear the interrupt bit we expect to be set. */ + qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); + + /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ + if (dd->flags & QIB_INITTED) + qib_ib_piobufavail(dd); + else + qib_wantpiobuf_7322_intr(dd, 0); + + return IRQ_HANDLED; +} + +/* + * Dedicated Send DMA interrupt handler. + */ +static irqreturn_t sdma_intr(int irq, void *data) +{ + struct qib_pportdata *ppd = data; + struct qib_devdata *dd = ppd->dd; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + return IRQ_HANDLED; + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* Clear the interrupt bit we expect to be set. */ + qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? + INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); + qib_sdma_intr(ppd); + + return IRQ_HANDLED; +} + +/* + * Dedicated Send DMA idle interrupt handler. + */ +static irqreturn_t sdma_idle_intr(int irq, void *data) +{ + struct qib_pportdata *ppd = data; + struct qib_devdata *dd = ppd->dd; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + return IRQ_HANDLED; + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* Clear the interrupt bit we expect to be set. */ + qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? + INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); + qib_sdma_intr(ppd); + + return IRQ_HANDLED; +} + +/* + * Dedicated Send DMA progress interrupt handler. + */ +static irqreturn_t sdma_progress_intr(int irq, void *data) +{ + struct qib_pportdata *ppd = data; + struct qib_devdata *dd = ppd->dd; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + return IRQ_HANDLED; + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* Clear the interrupt bit we expect to be set. */ + qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? + INT_MASK_P(SDmaProgress, 1) : + INT_MASK_P(SDmaProgress, 0)); + qib_sdma_intr(ppd); + + return IRQ_HANDLED; +} + +/* + * Dedicated Send DMA cleanup interrupt handler. + */ +static irqreturn_t sdma_cleanup_intr(int irq, void *data) +{ + struct qib_pportdata *ppd = data; + struct qib_devdata *dd = ppd->dd; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + return IRQ_HANDLED; + + qib_stats.sps_ints++; + if (dd->int_counter != (u32) -1) + dd->int_counter++; + + /* Clear the interrupt bit we expect to be set. */ + qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? + INT_MASK_PM(SDmaCleanupDone, 1) : + INT_MASK_PM(SDmaCleanupDone, 0)); + qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); + + return IRQ_HANDLED; +} + +/* + * Set up our chip-specific interrupt handler. + * The interrupt type has already been setup, so + * we just need to do the registration and error checking. + * If we are using MSIx interrupts, we may fall back to + * INTx later, if the interrupt handler doesn't get called + * within 1/2 second (see verify_interrupt()). + */ +static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) +{ + int ret, i, msixnum; + u64 redirect[6]; + u64 mask; + + if (!dd->num_pports) + return; + + if (clearpend) { + /* + * if not switching interrupt types, be sure interrupts are + * disabled, and then clear anything pending at this point, + * because we are starting clean. + */ + qib_7322_set_intr_state(dd, 0); + + /* clear the reset error, init error/hwerror mask */ + qib_7322_init_hwerrors(dd); + + /* clear any interrupt bits that might be set */ + qib_write_kreg(dd, kr_intclear, ~0ULL); + + /* make sure no pending MSIx intr, and clear diag reg */ + qib_write_kreg(dd, kr_intgranted, ~0ULL); + qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); + } + + if (!dd->cspec->num_msix_entries) { + /* Try to get INTx interrupt */ +try_intx: + if (!dd->pcidev->irq) { + qib_dev_err(dd, "irq is 0, BIOS error? " + "Interrupts won't work\n"); + goto bail; + } + ret = request_irq(dd->pcidev->irq, qib_7322intr, + IRQF_SHARED, QIB_DRV_NAME, dd); + if (ret) { + qib_dev_err(dd, "Couldn't setup INTx " + "interrupt (irq=%d): %d\n", + dd->pcidev->irq, ret); + goto bail; + } + dd->cspec->irq = dd->pcidev->irq; + dd->cspec->main_int_mask = ~0ULL; + goto bail; + } + + /* Try to get MSIx interrupts */ + memset(redirect, 0, sizeof redirect); + mask = ~0ULL; + msixnum = 0; + for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { + irq_handler_t handler; + const char *name; + void *arg; + u64 val; + int lsb, reg, sh; + + if (i < ARRAY_SIZE(irq_table)) { + if (irq_table[i].port) { + /* skip if for a non-configured port */ + if (irq_table[i].port > dd->num_pports) + continue; + arg = dd->pport + irq_table[i].port - 1; + } else + arg = dd; + lsb = irq_table[i].lsb; + handler = irq_table[i].handler; + name = irq_table[i].name; + } else { + unsigned ctxt; + + ctxt = i - ARRAY_SIZE(irq_table); + /* per krcvq context receive interrupt */ + arg = dd->rcd[ctxt]; + if (!arg) + continue; + lsb = QIB_I_RCVAVAIL_LSB + ctxt; + handler = qib_7322pintr; + name = QIB_DRV_NAME " (kctx)"; + } + ret = request_irq(dd->cspec->msix_entries[msixnum].vector, + handler, 0, name, arg); + if (ret) { + /* + * Shouldn't happen since the enable said we could + * have as many as we are trying to setup here. + */ + qib_dev_err(dd, "Couldn't setup MSIx " + "interrupt (vec=%d, irq=%d): %d\n", msixnum, + dd->cspec->msix_entries[msixnum].vector, + ret); + qib_7322_nomsix(dd); + goto try_intx; + } + dd->cspec->msix_arg[msixnum] = arg; + if (lsb >= 0) { + reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; + sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * + SYM_LSB(IntRedirect0, vec1); + mask &= ~(1ULL << lsb); + redirect[reg] |= ((u64) msixnum) << sh; + } + val = qib_read_kreg64(dd, 2 * msixnum + 1 + + (QIB_7322_MsixTable_OFFS / sizeof(u64))); + msixnum++; + } + /* Initialize the vector mapping */ + for (i = 0; i < ARRAY_SIZE(redirect); i++) + qib_write_kreg(dd, kr_intredirect + i, redirect[i]); + dd->cspec->main_int_mask = mask; +bail:; +} + +/** + * qib_7322_boardname - fill in the board name and note features + * @dd: the qlogic_ib device + * + * info will be based on the board revision register + */ +static unsigned qib_7322_boardname(struct qib_devdata *dd) +{ + /* Will need enumeration of board-types here */ + char *n; + u32 boardid, namelen; + unsigned features = DUAL_PORT_CAP; + + boardid = SYM_FIELD(dd->revision, Revision, BoardID); + + switch (boardid) { + case 0: + n = "InfiniPath_QLE7342_Emulation"; + break; + case 1: + n = "InfiniPath_QLE7340"; + dd->flags |= QIB_HAS_QSFP; + features = PORT_SPD_CAP; + break; + case 2: + n = "InfiniPath_QLE7342"; + dd->flags |= QIB_HAS_QSFP; + break; + case 3: + n = "InfiniPath_QMI7342"; + break; + case 4: + n = "InfiniPath_Unsupported7342"; + qib_dev_err(dd, "Unsupported version of QMH7342\n"); + features = 0; + break; + case BOARD_QMH7342: + n = "InfiniPath_QMH7342"; + features = 0x24; + break; + case BOARD_QME7342: + n = "InfiniPath_QME7342"; + break; + case 15: + n = "InfiniPath_QLE7342_TEST"; + dd->flags |= QIB_HAS_QSFP; + break; + default: + n = "InfiniPath_QLE73xy_UNKNOWN"; + qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); + break; + } + dd->board_atten = 1; /* index into txdds_Xdr */ + + namelen = strlen(n) + 1; + dd->boardname = kmalloc(namelen, GFP_KERNEL); + if (!dd->boardname) + qib_dev_err(dd, "Failed allocation for board name: %s\n", n); + else + snprintf(dd->boardname, namelen, "%s", n); + + snprintf(dd->boardversion, sizeof(dd->boardversion), + "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", + QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, + (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch), + dd->majrev, dd->minrev, + (unsigned)SYM_FIELD(dd->revision, Revision_R, SW)); + + if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { + qib_devinfo(dd->pcidev, "IB%u: Forced to single port mode" + " by module parameter\n", dd->unit); + features &= PORT_SPD_CAP; + } + + return features; +} + +/* + * This routine sleeps, so it can only be called from user context, not + * from interrupt context. + */ +static int qib_do_7322_reset(struct qib_devdata *dd) +{ + u64 val; + u64 *msix_vecsave; + int i, msix_entries, ret = 1; + u16 cmdval; + u8 int_line, clinesz; + unsigned long flags; + + /* Use dev_err so it shows up in logs, etc. */ + qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); + + qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); + + msix_entries = dd->cspec->num_msix_entries; + + /* no interrupts till re-initted */ + qib_7322_set_intr_state(dd, 0); + + if (msix_entries) { + qib_7322_nomsix(dd); + /* can be up to 512 bytes, too big for stack */ + msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries * + sizeof(u64), GFP_KERNEL); + if (!msix_vecsave) + qib_dev_err(dd, "No mem to save MSIx data\n"); + } else + msix_vecsave = NULL; + + /* + * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector + * info that is set up by the BIOS, so we have to save and restore + * it ourselves. There is some risk something could change it, + * after we save it, but since we have disabled the MSIx, it + * shouldn't be touched... + */ + for (i = 0; i < msix_entries; i++) { + u64 vecaddr, vecdata; + vecaddr = qib_read_kreg64(dd, 2 * i + + (QIB_7322_MsixTable_OFFS / sizeof(u64))); + vecdata = qib_read_kreg64(dd, 1 + 2 * i + + (QIB_7322_MsixTable_OFFS / sizeof(u64))); + if (msix_vecsave) { + msix_vecsave[2 * i] = vecaddr; + /* save it without the masked bit set */ + msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; + } + } + + dd->pport->cpspec->ibdeltainprog = 0; + dd->pport->cpspec->ibsymdelta = 0; + dd->pport->cpspec->iblnkerrdelta = 0; + dd->pport->cpspec->ibmalfdelta = 0; + dd->int_counter = 0; /* so we check interrupts work again */ + + /* + * Keep chip from being accessed until we are ready. Use + * writeq() directly, to allow the write even though QIB_PRESENT + * isnt' set. + */ + dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); + dd->flags |= QIB_DOING_RESET; + val = dd->control | QLOGIC_IB_C_RESET; + writeq(val, &dd->kregbase[kr_control]); + + for (i = 1; i <= 5; i++) { + /* + * Allow MBIST, etc. to complete; longer on each retry. + * We sometimes get machine checks from bus timeout if no + * response, so for now, make it *really* long. + */ + msleep(1000 + (1 + i) * 3000); + + qib_pcie_reenable(dd, cmdval, int_line, clinesz); + + /* + * Use readq directly, so we don't need to mark it as PRESENT + * until we get a successful indication that all is well. + */ + val = readq(&dd->kregbase[kr_revision]); + if (val == dd->revision) + break; + if (i == 5) { + qib_dev_err(dd, "Failed to initialize after reset, " + "unusable\n"); + ret = 0; + goto bail; + } + } + + dd->flags |= QIB_PRESENT; /* it's back */ + + if (msix_entries) { + /* restore the MSIx vector address and data if saved above */ + for (i = 0; i < msix_entries; i++) { + dd->cspec->msix_entries[i].entry = i; + if (!msix_vecsave || !msix_vecsave[2 * i]) + continue; + qib_write_kreg(dd, 2 * i + + (QIB_7322_MsixTable_OFFS / sizeof(u64)), + msix_vecsave[2 * i]); + qib_write_kreg(dd, 1 + 2 * i + + (QIB_7322_MsixTable_OFFS / sizeof(u64)), + msix_vecsave[1 + 2 * i]); + } + } + + /* initialize the remaining registers. */ + for (i = 0; i < dd->num_pports; ++i) + write_7322_init_portregs(&dd->pport[i]); + write_7322_initregs(dd); + + if (qib_pcie_params(dd, dd->lbus_width, + &dd->cspec->num_msix_entries, + dd->cspec->msix_entries)) + qib_dev_err(dd, "Reset failed to setup PCIe or interrupts; " + "continuing anyway\n"); + + qib_setup_7322_interrupt(dd, 1); + + for (i = 0; i < dd->num_pports; ++i) { + struct qib_pportdata *ppd = &dd->pport[i]; + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_FORCE_NOTIFY; + ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } + +bail: + dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ + kfree(msix_vecsave); + return ret; +} + +/** + * qib_7322_put_tid - write a TID to the chip + * @dd: the qlogic_ib device + * @tidptr: pointer to the expected TID (in chip) to update + * @tidtype: 0 for eager, 1 for expected + * @pa: physical address of in memory buffer; tidinvalid if freeing + */ +static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, + u32 type, unsigned long pa) +{ + if (!(dd->flags & QIB_PRESENT)) + return; + if (pa != dd->tidinvalid) { + u64 chippa = pa >> IBA7322_TID_PA_SHIFT; + + /* paranoia checks */ + if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { + qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", + pa); + return; + } + if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { + qib_dev_err(dd, "Physical page address 0x%lx " + "larger than supported\n", pa); + return; + } + + if (type == RCVHQ_RCV_TYPE_EAGER) + chippa |= dd->tidtemplate; + else /* for now, always full 4KB page */ + chippa |= IBA7322_TID_SZ_4K; + pa = chippa; + } + writeq(pa, tidptr); + mmiowb(); +} + +/** + * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager + * @dd: the qlogic_ib device + * @ctxt: the ctxt + * + * clear all TID entries for a ctxt, expected and eager. + * Used from qib_close(). + */ +static void qib_7322_clear_tids(struct qib_devdata *dd, + struct qib_ctxtdata *rcd) +{ + u64 __iomem *tidbase; + unsigned long tidinv; + u32 ctxt; + int i; + + if (!dd->kregbase || !rcd) + return; + + ctxt = rcd->ctxt; + + tidinv = dd->tidinvalid; + tidbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + + dd->rcvtidbase + + ctxt * dd->rcvtidcnt * sizeof(*tidbase)); + + for (i = 0; i < dd->rcvtidcnt; i++) + qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, + tidinv); + + tidbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + + dd->rcvegrbase + + rcd->rcvegr_tid_base * sizeof(*tidbase)); + + for (i = 0; i < rcd->rcvegrcnt; i++) + qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, + tidinv); +} + +/** + * qib_7322_tidtemplate - setup constants for TID updates + * @dd: the qlogic_ib device + * + * We setup stuff that we use a lot, to avoid calculating each time + */ +static void qib_7322_tidtemplate(struct qib_devdata *dd) +{ + /* + * For now, we always allocate 4KB buffers (at init) so we can + * receive max size packets. We may want a module parameter to + * specify 2KB or 4KB and/or make it per port instead of per device + * for those who want to reduce memory footprint. Note that the + * rcvhdrentsize size must be large enough to hold the largest + * IB header (currently 96 bytes) that we expect to handle (plus of + * course the 2 dwords of RHF). + */ + if (dd->rcvegrbufsize == 2048) + dd->tidtemplate = IBA7322_TID_SZ_2K; + else if (dd->rcvegrbufsize == 4096) + dd->tidtemplate = IBA7322_TID_SZ_4K; + dd->tidinvalid = 0; +} + +/** + * qib_init_7322_get_base_info - set chip-specific flags for user code + * @rcd: the qlogic_ib ctxt + * @kbase: qib_base_info pointer + * + * We set the PCIE flag because the lower bandwidth on PCIe vs + * HyperTransport can affect some user packet algorithims. + */ + +static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, + struct qib_base_info *kinfo) +{ + kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | + QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | + QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; + if (rcd->dd->cspec->r1) + kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; + if (rcd->dd->flags & QIB_USE_SPCL_TRIG) + kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; + + return 0; +} + +static struct qib_message_header * +qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) +{ + u32 offset = qib_hdrget_offset(rhf_addr); + + return (struct qib_message_header *) + (rhf_addr - dd->rhf_offset + offset); +} + +/* + * Configure number of contexts. + */ +static void qib_7322_config_ctxts(struct qib_devdata *dd) +{ + unsigned long flags; + u32 nchipctxts; + + nchipctxts = qib_read_kreg32(dd, kr_contextcnt); + dd->cspec->numctxts = nchipctxts; + if (qib_n_krcv_queues > 1 && dd->num_pports) { + /* + * Set the mask for which bits from the QPN are used + * to select a context number. + */ + dd->qpn_mask = 0x3f; + dd->first_user_ctxt = NUM_IB_PORTS + + (qib_n_krcv_queues - 1) * dd->num_pports; + if (dd->first_user_ctxt > nchipctxts) + dd->first_user_ctxt = nchipctxts; + dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; + } else { + dd->first_user_ctxt = NUM_IB_PORTS; + dd->n_krcv_queues = 1; + } + + if (!qib_cfgctxts) { + int nctxts = dd->first_user_ctxt + num_online_cpus(); + + if (nctxts <= 6) + dd->ctxtcnt = 6; + else if (nctxts <= 10) + dd->ctxtcnt = 10; + else if (nctxts <= nchipctxts) + dd->ctxtcnt = nchipctxts; + } else if (qib_cfgctxts < dd->num_pports) + dd->ctxtcnt = dd->num_pports; + else if (qib_cfgctxts <= nchipctxts) + dd->ctxtcnt = qib_cfgctxts; + if (!dd->ctxtcnt) /* none of the above, set to max */ + dd->ctxtcnt = nchipctxts; + + /* + * Chip can be configured for 6, 10, or 18 ctxts, and choice + * affects number of eager TIDs per ctxt (1K, 2K, 4K). + * Lock to be paranoid about later motion, etc. + */ + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + if (dd->ctxtcnt > 10) + dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); + else if (dd->ctxtcnt > 6) + dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); + /* else configure for default 6 receive ctxts */ + + /* The XRC opcode is 5. */ + dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); + + /* + * RcvCtrl *must* be written here so that the + * chip understands how to change rcvegrcnt below. + */ + qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); + + /* kr_rcvegrcnt changes based on the number of contexts enabled */ + dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); + dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, + dd->num_pports > 1 ? 1024U : 2048U); +} + +static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) +{ + + int lsb, ret = 0; + u64 maskr; /* right-justified mask */ + + switch (which) { + + case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ + ret = ppd->link_width_enabled; + goto done; + + case QIB_IB_CFG_LWID: /* Get currently active Link-width */ + ret = ppd->link_width_active; + goto done; + + case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ + ret = ppd->link_speed_enabled; + goto done; + + case QIB_IB_CFG_SPD: /* Get current Link spd */ + ret = ppd->link_speed_active; + goto done; + + case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ + lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); + maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); + break; + + case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ + lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); + maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); + break; + + case QIB_IB_CFG_LINKLATENCY: + ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & + SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); + goto done; + + case QIB_IB_CFG_OP_VLS: + ret = ppd->vls_operational; + goto done; + + case QIB_IB_CFG_VL_HIGH_CAP: + ret = 16; + goto done; + + case QIB_IB_CFG_VL_LOW_CAP: + ret = 16; + goto done; + + case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, + OverrunThreshold); + goto done; + + case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, + PhyerrThreshold); + goto done; + + case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* will only take effect when the link state changes */ + ret = (ppd->cpspec->ibcctrl_a & + SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? + IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; + goto done; + + case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ + lsb = IBA7322_IBC_HRTBT_LSB; + maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ + break; + + case QIB_IB_CFG_PMA_TICKS: + /* + * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs + * Since the clock is always 250MHz, the value is 3, 1 or 0. + */ + if (ppd->link_speed_active == QIB_IB_QDR) + ret = 3; + else if (ppd->link_speed_active == QIB_IB_DDR) + ret = 1; + else + ret = 0; + goto done; + + default: + ret = -EINVAL; + goto done; + } + ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); +done: + return ret; +} + +/* + * Below again cribbed liberally from older version. Do not lean + * heavily on it. + */ +#define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB +#define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ + | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) + +static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) +{ + struct qib_devdata *dd = ppd->dd; + u64 maskr; /* right-justified mask */ + int lsb, ret = 0; + u16 lcmd, licmd; + unsigned long flags; + + switch (which) { + case QIB_IB_CFG_LIDLMC: + /* + * Set LID and LMC. Combined to avoid possible hazard + * caller puts LMC in 16MSbits, DLID in 16LSbits of val + */ + lsb = IBA7322_IBC_DLIDLMC_SHIFT; + maskr = IBA7322_IBC_DLIDLMC_MASK; + /* + * For header-checking, the SLID in the packet will + * be masked with SendIBSLMCMask, and compared + * with SendIBSLIDAssignMask. Make sure we do not + * set any bits not covered by the mask, or we get + * false-positives. + */ + qib_write_kreg_port(ppd, krp_sendslid, + val & (val >> 16) & SendIBSLIDAssignMask); + qib_write_kreg_port(ppd, krp_sendslidmask, + (val >> 16) & SendIBSLMCMask); + break; + + case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ + ppd->link_width_enabled = val; + /* convert IB value to chip register value */ + if (val == IB_WIDTH_1X) + val = 0; + else if (val == IB_WIDTH_4X) + val = 1; + else + val = 3; + maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); + lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); + break; + + case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ + /* + * As with width, only write the actual register if the + * link is currently down, otherwise takes effect on next + * link change. Since setting is being explictly requested + * (via MAD or sysfs), clear autoneg failure status if speed + * autoneg is enabled. + */ + ppd->link_speed_enabled = val; + val <<= IBA7322_IBC_SPEED_LSB; + maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | + IBA7322_IBC_MAX_SPEED_MASK; + if (val & (val - 1)) { + /* Muliple speeds enabled */ + val |= IBA7322_IBC_IBTA_1_2_MASK | + IBA7322_IBC_MAX_SPEED_MASK; + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else if (val & IBA7322_IBC_SPEED_QDR) + val |= IBA7322_IBC_IBTA_1_2_MASK; + /* IBTA 1.2 mode + min/max + speed bits are contiguous */ + lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); + break; + + case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ + lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); + maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); + break; + + case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ + lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); + maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); + break; + + case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, + OverrunThreshold); + if (maskr != val) { + ppd->cpspec->ibcctrl_a &= + ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); + ppd->cpspec->ibcctrl_a |= (u64) val << + SYM_LSB(IBCCtrlA_0, OverrunThreshold); + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); + } + goto bail; + + case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, + PhyerrThreshold); + if (maskr != val) { + ppd->cpspec->ibcctrl_a &= + ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); + ppd->cpspec->ibcctrl_a |= (u64) val << + SYM_LSB(IBCCtrlA_0, PhyerrThreshold); + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); + } + goto bail; + + case QIB_IB_CFG_PKEYS: /* update pkeys */ + maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | + ((u64) ppd->pkeys[2] << 32) | + ((u64) ppd->pkeys[3] << 48); + qib_write_kreg_port(ppd, krp_partitionkey, maskr); + goto bail; + + case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* will only take effect when the link state changes */ + if (val == IB_LINKINITCMD_POLL) + ppd->cpspec->ibcctrl_a &= + ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); + else /* SLEEP */ + ppd->cpspec->ibcctrl_a |= + SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); + qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); + goto bail; + + case QIB_IB_CFG_MTU: /* update the MTU in IBC */ + /* + * Update our housekeeping variables, and set IBC max + * size, same as init code; max IBC is max we allow in + * buffer, less the qword pbc, plus 1 for ICRC, in dwords + * Set even if it's unchanged, print debug message only + * on changes. + */ + val = (ppd->ibmaxlen >> 2) + 1; + ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); + ppd->cpspec->ibcctrl_a |= (u64)val << + SYM_LSB(IBCCtrlA_0, MaxPktLen); + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); + goto bail; + + case QIB_IB_CFG_LSTATE: /* set the IB link state */ + switch (val & 0xffff0000) { + case IB_LINKCMD_DOWN: + lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; + ppd->cpspec->ibmalfusesnap = 1; + ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, + crp_errlink); + if (!ppd->cpspec->ibdeltainprog && + qib_compat_ddr_negotiate) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = + read_7322_creg32_port(ppd, + crp_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = + read_7322_creg32_port(ppd, + crp_iblinkerrrecov); + } + break; + + case IB_LINKCMD_ARMED: + lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; + if (ppd->cpspec->ibmalfusesnap) { + ppd->cpspec->ibmalfusesnap = 0; + ppd->cpspec->ibmalfdelta += + read_7322_creg32_port(ppd, + crp_errlink) - + ppd->cpspec->ibmalfsnap; + } + break; + + case IB_LINKCMD_ACTIVE: + lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; + break; + + default: + ret = -EINVAL; + qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); + goto bail; + } + switch (val & 0xffff) { + case IB_LINKINITCMD_NOP: + licmd = 0; + break; + + case IB_LINKINITCMD_POLL: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; + break; + + case IB_LINKINITCMD_SLEEP: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; + break; + + case IB_LINKINITCMD_DISABLE: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; + ppd->cpspec->chase_end = 0; + /* + * stop state chase counter and timer, if running. + * wait forpending timer, but don't clear .data (ppd)! + */ + if (ppd->cpspec->chase_timer.expires) { + del_timer_sync(&ppd->cpspec->chase_timer); + ppd->cpspec->chase_timer.expires = 0; + } + break; + + default: + ret = -EINVAL; + qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", + val & 0xffff); + goto bail; + } + qib_set_ib_7322_lstate(ppd, lcmd, licmd); + goto bail; + + case QIB_IB_CFG_OP_VLS: + if (ppd->vls_operational != val) { + ppd->vls_operational = val; + set_vls(ppd); + } + goto bail; + + case QIB_IB_CFG_VL_HIGH_LIMIT: + qib_write_kreg_port(ppd, krp_highprio_limit, val); + goto bail; + + case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ + if (val > 3) { + ret = -EINVAL; + goto bail; + } + lsb = IBA7322_IBC_HRTBT_LSB; + maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ + break; + + case QIB_IB_CFG_PORT: + /* val is the port number of the switch we are connected to. */ + if (ppd->dd->cspec->r1) { + cancel_delayed_work(&ppd->cpspec->ipg_work); + ppd->cpspec->ipg_tries = 0; + } + goto bail; + + default: + ret = -EINVAL; + goto bail; + } + ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); + ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); + qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); + qib_write_kreg(dd, kr_scratch, 0); +bail: + return ret; +} + +static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) +{ + int ret = 0; + u64 val, ctrlb; + + /* only IBC loopback, may add serdes and xgxs loopbacks later */ + if (!strncmp(what, "ibc", 3)) { + ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, + Loopback); + val = 0; /* disable heart beat, so link will come up */ + qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", + ppd->dd->unit, ppd->port); + } else if (!strncmp(what, "off", 3)) { + ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, + Loopback); + /* enable heart beat again */ + val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; + qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback " + "(normal)\n", ppd->dd->unit, ppd->port); + } else + ret = -EINVAL; + if (!ret) { + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a); + ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK + << IBA7322_IBC_HRTBT_LSB); + ppd->cpspec->ibcctrl_b = ctrlb | val; + qib_write_kreg_port(ppd, krp_ibcctrl_b, + ppd->cpspec->ibcctrl_b); + qib_write_kreg(ppd->dd, kr_scratch, 0); + } + return ret; +} + +static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, + struct ib_vl_weight_elem *vl) +{ + unsigned i; + + for (i = 0; i < 16; i++, regno++, vl++) { + u32 val = qib_read_kreg_port(ppd, regno); + + vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & + SYM_RMASK(LowPriority0_0, VirtualLane); + vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & + SYM_RMASK(LowPriority0_0, Weight); + } +} + +static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, + struct ib_vl_weight_elem *vl) +{ + unsigned i; + + for (i = 0; i < 16; i++, regno++, vl++) { + u64 val; + + val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << + SYM_LSB(LowPriority0_0, VirtualLane)) | + ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << + SYM_LSB(LowPriority0_0, Weight)); + qib_write_kreg_port(ppd, regno, val); + } + if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { + struct qib_devdata *dd = ppd->dd; + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); + qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + } +} + +static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) +{ + switch (which) { + case QIB_IB_TBL_VL_HIGH_ARB: + get_vl_weights(ppd, krp_highprio_0, t); + break; + + case QIB_IB_TBL_VL_LOW_ARB: + get_vl_weights(ppd, krp_lowprio_0, t); + break; + + default: + return -EINVAL; + } + return 0; +} + +static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) +{ + switch (which) { + case QIB_IB_TBL_VL_HIGH_ARB: + set_vl_weights(ppd, krp_highprio_0, t); + break; + + case QIB_IB_TBL_VL_LOW_ARB: + set_vl_weights(ppd, krp_lowprio_0, t); + break; + + default: + return -EINVAL; + } + return 0; +} + +static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, + u32 updegr, u32 egrhd) +{ + qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); + qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); + if (updegr) + qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); +} + +static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) +{ + u32 head, tail; + + head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); + if (rcd->rcvhdrtail_kvaddr) + tail = qib_get_rcvhdrtail(rcd); + else + tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); + return head == tail; +} + +#define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ + QIB_RCVCTRL_CTXT_DIS | \ + QIB_RCVCTRL_TIDFLOW_ENB | \ + QIB_RCVCTRL_TIDFLOW_DIS | \ + QIB_RCVCTRL_TAILUPD_ENB | \ + QIB_RCVCTRL_TAILUPD_DIS | \ + QIB_RCVCTRL_INTRAVAIL_ENB | \ + QIB_RCVCTRL_INTRAVAIL_DIS | \ + QIB_RCVCTRL_BP_ENB | \ + QIB_RCVCTRL_BP_DIS) + +#define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ + QIB_RCVCTRL_CTXT_DIS | \ + QIB_RCVCTRL_PKEY_DIS | \ + QIB_RCVCTRL_PKEY_ENB) + +/* + * Modify the RCVCTRL register in chip-specific way. This + * is a function because bit positions and (future) register + * location is chip-specifc, but the needed operations are + * generic. <op> is a bit-mask because we often want to + * do multiple modifications. + */ +static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, + int ctxt) +{ + struct qib_devdata *dd = ppd->dd; + struct qib_ctxtdata *rcd; + u64 mask, val; + unsigned long flags; + + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + + if (op & QIB_RCVCTRL_TIDFLOW_ENB) + dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); + if (op & QIB_RCVCTRL_TIDFLOW_DIS) + dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); + if (op & QIB_RCVCTRL_TAILUPD_ENB) + dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); + if (op & QIB_RCVCTRL_TAILUPD_DIS) + dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); + if (op & QIB_RCVCTRL_PKEY_ENB) + ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); + if (op & QIB_RCVCTRL_PKEY_DIS) + ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); + if (ctxt < 0) { + mask = (1ULL << dd->ctxtcnt) - 1; + rcd = NULL; + } else { + mask = (1ULL << ctxt); + rcd = dd->rcd[ctxt]; + } + if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { + ppd->p_rcvctrl |= + (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); + if (!(dd->flags & QIB_NODMA_RTAIL)) { + op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ + dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); + } + /* Write these registers before the context is enabled. */ + qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, + rcd->rcvhdrqtailaddr_phys); + qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, + rcd->rcvhdrq_phys); + rcd->seq_cnt = 1; + } + if (op & QIB_RCVCTRL_CTXT_DIS) + ppd->p_rcvctrl &= + ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); + if (op & QIB_RCVCTRL_BP_ENB) + dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); + if (op & QIB_RCVCTRL_BP_DIS) + dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); + if (op & QIB_RCVCTRL_INTRAVAIL_ENB) + dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); + if (op & QIB_RCVCTRL_INTRAVAIL_DIS) + dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); + /* + * Decide which registers to write depending on the ops enabled. + * Special case is "flush" (no bits set at all) + * which needs to write both. + */ + if (op == 0 || (op & RCVCTRL_COMMON_MODS)) + qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); + if (op == 0 || (op & RCVCTRL_PORT_MODS)) + qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); + if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { + /* + * Init the context registers also; if we were + * disabled, tail and head should both be zero + * already from the enable, but since we don't + * know, we have to do it explictly. + */ + val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); + qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); + + /* be sure enabling write seen; hd/tl should be 0 */ + (void) qib_read_kreg32(dd, kr_scratch); + val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); + dd->rcd[ctxt]->head = val; + /* If kctxt, interrupt on next receive. */ + if (ctxt < dd->first_user_ctxt) + val |= dd->rhdrhead_intr_off; + qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); + } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && + dd->rcd[ctxt] && dd->rhdrhead_intr_off) { + /* arm rcv interrupt */ + val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; + qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); + } + if (op & QIB_RCVCTRL_CTXT_DIS) { + unsigned f; + + /* Now that the context is disabled, clear these registers. */ + if (ctxt >= 0) { + qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); + qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); + for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) + qib_write_ureg(dd, ur_rcvflowtable + f, + TIDFLOW_ERRBITS, ctxt); + } else { + unsigned i; + + for (i = 0; i < dd->cfgctxts; i++) { + qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, + i, 0); + qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); + for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) + qib_write_ureg(dd, ur_rcvflowtable + f, + TIDFLOW_ERRBITS, i); + } + } + } + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); +} + +/* + * Modify the SENDCTRL register in chip-specific way. This + * is a function where there are multiple such registers with + * slightly different layouts. + * The chip doesn't allow back-to-back sendctrl writes, so write + * the scratch register after writing sendctrl. + * + * Which register is written depends on the operation. + * Most operate on the common register, while + * SEND_ENB and SEND_DIS operate on the per-port ones. + * SEND_ENB is included in common because it can change SPCL_TRIG + */ +#define SENDCTRL_COMMON_MODS (\ + QIB_SENDCTRL_CLEAR | \ + QIB_SENDCTRL_AVAIL_DIS | \ + QIB_SENDCTRL_AVAIL_ENB | \ + QIB_SENDCTRL_AVAIL_BLIP | \ + QIB_SENDCTRL_DISARM | \ + QIB_SENDCTRL_DISARM_ALL | \ + QIB_SENDCTRL_SEND_ENB) + +#define SENDCTRL_PORT_MODS (\ + QIB_SENDCTRL_CLEAR | \ + QIB_SENDCTRL_SEND_ENB | \ + QIB_SENDCTRL_SEND_DIS | \ + QIB_SENDCTRL_FLUSH) + +static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) +{ + struct qib_devdata *dd = ppd->dd; + u64 tmp_dd_sendctrl; + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + + /* First the dd ones that are "sticky", saved in shadow */ + if (op & QIB_SENDCTRL_CLEAR) + dd->sendctrl = 0; + if (op & QIB_SENDCTRL_AVAIL_DIS) + dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); + else if (op & QIB_SENDCTRL_AVAIL_ENB) { + dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); + if (dd->flags & QIB_USE_SPCL_TRIG) + dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); + } + + /* Then the ppd ones that are "sticky", saved in shadow */ + if (op & QIB_SENDCTRL_SEND_DIS) + ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); + else if (op & QIB_SENDCTRL_SEND_ENB) + ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); + + if (op & QIB_SENDCTRL_DISARM_ALL) { + u32 i, last; + + tmp_dd_sendctrl = dd->sendctrl; + last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; + /* + * Disarm any buffers that are not yet launched, + * disabling updates until done. + */ + tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); + for (i = 0; i < last; i++) { + qib_write_kreg(dd, kr_sendctrl, + tmp_dd_sendctrl | + SYM_MASK(SendCtrl, Disarm) | i); + qib_write_kreg(dd, kr_scratch, 0); + } + } + + if (op & QIB_SENDCTRL_FLUSH) { + u64 tmp_ppd_sendctrl = ppd->p_sendctrl; + + /* + * Now drain all the fifos. The Abort bit should never be + * needed, so for now, at least, we don't use it. + */ + tmp_ppd_sendctrl |= + SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | + SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | + SYM_MASK(SendCtrl_0, TxeBypassIbc); + qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + tmp_dd_sendctrl = dd->sendctrl; + + if (op & QIB_SENDCTRL_DISARM) + tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | + ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << + SYM_LSB(SendCtrl, DisarmSendBuf)); + if ((op & QIB_SENDCTRL_AVAIL_BLIP) && + (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) + tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); + + if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { + qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + if (op == 0 || (op & SENDCTRL_PORT_MODS)) { + qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + if (op & QIB_SENDCTRL_AVAIL_BLIP) { + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + + if (op & QIB_SENDCTRL_FLUSH) { + u32 v; + /* + * ensure writes have hit chip, then do a few + * more reads, to allow DMA of pioavail registers + * to occur, so in-memory copy is in sync with + * the chip. Not always safe to sleep. + */ + v = qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_scratch, v); + v = qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_scratch, v); + qib_read_kreg32(dd, kr_scratch); + } +} + +#define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ +#define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ +#define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ + +/** + * qib_portcntr_7322 - read a per-port chip counter + * @ppd: the qlogic_ib pport + * @creg: the counter to read (not a chip offset) + */ +static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) +{ + struct qib_devdata *dd = ppd->dd; + u64 ret = 0ULL; + u16 creg; + /* 0xffff for unimplemented or synthesized counters */ + static const u32 xlator[] = { + [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, + [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, + [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, + [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, + [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, + [QIBPORTCNTR_SENDSTALL] = crp_sendstall, + [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, + [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, + [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, + [QIBPORTCNTR_RCVEBP] = crp_rcvebp, + [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, + [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, + [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ + [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, + [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, + [QIBPORTCNTR_ERRICRC] = crp_erricrc, + [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, + [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, + [QIBPORTCNTR_BADFORMAT] = crp_badformat, + [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, + [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, + [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, + [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, + [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, + [QIBPORTCNTR_ERRLINK] = crp_errlink, + [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, + [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, + [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, + [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, + [QIBPORTCNTR_ERRPKEY] = crp_errpkey, + /* + * the next 3 aren't really counters, but were implemented + * as counters in older chips, so still get accessed as + * though they were counters from this code. + */ + [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, + [QIBPORTCNTR_PSSTART] = krp_psstart, + [QIBPORTCNTR_PSSTAT] = krp_psstat, + /* pseudo-counter, summed for all ports */ + [QIBPORTCNTR_KHDROVFL] = 0xffff, + }; + + if (reg >= ARRAY_SIZE(xlator)) { + qib_devinfo(ppd->dd->pcidev, + "Unimplemented portcounter %u\n", reg); + goto done; + } + creg = xlator[reg] & _PORT_CNTR_IDXMASK; + + /* handle non-counters and special cases first */ + if (reg == QIBPORTCNTR_KHDROVFL) { + int i; + + /* sum over all kernel contexts (skip if mini_init) */ + for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { + struct qib_ctxtdata *rcd = dd->rcd[i]; + + if (!rcd || rcd->ppd != ppd) + continue; + ret += read_7322_creg32(dd, cr_base_egrovfl + i); + } + goto done; + } else if (reg == QIBPORTCNTR_RXDROPPKT) { + /* + * Used as part of the synthesis of port_rcv_errors + * in the verbs code for IBTA counters. Not needed for 7322, + * because all the errors are already counted by other cntrs. + */ + goto done; + } else if (reg == QIBPORTCNTR_PSINTERVAL || + reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { + /* were counters in older chips, now per-port kernel regs */ + ret = qib_read_kreg_port(ppd, creg); + goto done; + } + + /* + * Only fast increment counters are 64 bits; use 32 bit reads to + * avoid two independent reads when on Opteron. + */ + if (xlator[reg] & _PORT_64BIT_FLAG) + ret = read_7322_creg_port(ppd, creg); + else + ret = read_7322_creg32_port(ppd, creg); + if (creg == crp_ibsymbolerr) { + if (ppd->cpspec->ibdeltainprog) + ret -= ret - ppd->cpspec->ibsymsnap; + ret -= ppd->cpspec->ibsymdelta; + } else if (creg == crp_iblinkerrrecov) { + if (ppd->cpspec->ibdeltainprog) + ret -= ret - ppd->cpspec->iblnkerrsnap; + ret -= ppd->cpspec->iblnkerrdelta; + } else if (creg == crp_errlink) + ret -= ppd->cpspec->ibmalfdelta; + else if (creg == crp_iblinkdown) + ret += ppd->cpspec->iblnkdowndelta; +done: + return ret; +} + +/* + * Device counter names (not port-specific), one line per stat, + * single string. Used by utilities like ipathstats to print the stats + * in a way which works for different versions of drivers, without changing + * the utility. Names need to be 12 chars or less (w/o newline), for proper + * display by utility. + * Non-error counters are first. + * Start of "error" conters is indicated by a leading "E " on the first + * "error" counter, and doesn't count in label length. + * The EgrOvfl list needs to be last so we truncate them at the configured + * context count for the device. + * cntr7322indices contains the corresponding register indices. + */ +static const char cntr7322names[] = + "Interrupts\n" + "HostBusStall\n" + "E RxTIDFull\n" + "RxTIDInvalid\n" + "RxTIDFloDrop\n" /* 7322 only */ + "Ctxt0EgrOvfl\n" + "Ctxt1EgrOvfl\n" + "Ctxt2EgrOvfl\n" + "Ctxt3EgrOvfl\n" + "Ctxt4EgrOvfl\n" + "Ctxt5EgrOvfl\n" + "Ctxt6EgrOvfl\n" + "Ctxt7EgrOvfl\n" + "Ctxt8EgrOvfl\n" + "Ctxt9EgrOvfl\n" + "Ctx10EgrOvfl\n" + "Ctx11EgrOvfl\n" + "Ctx12EgrOvfl\n" + "Ctx13EgrOvfl\n" + "Ctx14EgrOvfl\n" + "Ctx15EgrOvfl\n" + "Ctx16EgrOvfl\n" + "Ctx17EgrOvfl\n" + ; + +static const u32 cntr7322indices[] = { + cr_lbint | _PORT_64BIT_FLAG, + cr_lbstall | _PORT_64BIT_FLAG, + cr_tidfull, + cr_tidinvalid, + cr_rxtidflowdrop, + cr_base_egrovfl + 0, + cr_base_egrovfl + 1, + cr_base_egrovfl + 2, + cr_base_egrovfl + 3, + cr_base_egrovfl + 4, + cr_base_egrovfl + 5, + cr_base_egrovfl + 6, + cr_base_egrovfl + 7, + cr_base_egrovfl + 8, + cr_base_egrovfl + 9, + cr_base_egrovfl + 10, + cr_base_egrovfl + 11, + cr_base_egrovfl + 12, + cr_base_egrovfl + 13, + cr_base_egrovfl + 14, + cr_base_egrovfl + 15, + cr_base_egrovfl + 16, + cr_base_egrovfl + 17, +}; + +/* + * same as cntr7322names and cntr7322indices, but for port-specific counters. + * portcntr7322indices is somewhat complicated by some registers needing + * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG + */ +static const char portcntr7322names[] = + "TxPkt\n" + "TxFlowPkt\n" + "TxWords\n" + "RxPkt\n" + "RxFlowPkt\n" + "RxWords\n" + "TxFlowStall\n" + "TxDmaDesc\n" /* 7220 and 7322-only */ + "E RxDlidFltr\n" /* 7220 and 7322-only */ + "IBStatusChng\n" + "IBLinkDown\n" + "IBLnkRecov\n" + "IBRxLinkErr\n" + "IBSymbolErr\n" + "RxLLIErr\n" + "RxBadFormat\n" + "RxBadLen\n" + "RxBufOvrfl\n" + "RxEBP\n" + "RxFlowCtlErr\n" + "RxICRCerr\n" + "RxLPCRCerr\n" + "RxVCRCerr\n" + "RxInvalLen\n" + "RxInvalPKey\n" + "RxPktDropped\n" + "TxBadLength\n" + "TxDropped\n" + "TxInvalLen\n" + "TxUnderrun\n" + "TxUnsupVL\n" + "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ + "RxVL15Drop\n" + "RxVlErr\n" + "XcessBufOvfl\n" + "RxQPBadCtxt\n" /* 7322-only from here down */ + "TXBadHeader\n" + ; + +static const u32 portcntr7322indices[] = { + QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, + crp_pktsendflow, + QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, + QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, + crp_pktrcvflowctrl, + QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, + QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, + crp_txsdmadesc | _PORT_64BIT_FLAG, + crp_rxdlidfltr, + crp_ibstatuschange, + QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, + QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, + QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, + QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, + QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, + QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, + crp_rcvflowctrlviol, + QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, + QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, + crp_txminmaxlenerr, + crp_txdroppedpkt, + crp_txlenerr, + crp_txunderrun, + crp_txunsupvl, + QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, + QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, + crp_rxqpinvalidctxt, + crp_txhdrerr, +}; + +/* do all the setup to make the counter reads efficient later */ +static void init_7322_cntrnames(struct qib_devdata *dd) +{ + int i, j = 0; + char *s; + + for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; + i++) { + /* we always have at least one counter before the egrovfl */ + if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) + j = 1; + s = strchr(s + 1, '\n'); + if (s && j) + j++; + } + dd->cspec->ncntrs = i; + if (!s) + /* full list; size is without terminating null */ + dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; + else + dd->cspec->cntrnamelen = 1 + s - cntr7322names; + dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs + * sizeof(u64), GFP_KERNEL); + if (!dd->cspec->cntrs) + qib_dev_err(dd, "Failed allocation for counters\n"); + + for (i = 0, s = (char *)portcntr7322names; s; i++) + s = strchr(s + 1, '\n'); + dd->cspec->nportcntrs = i - 1; + dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; + for (i = 0; i < dd->num_pports; ++i) { + dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs + * sizeof(u64), GFP_KERNEL); + if (!dd->pport[i].cpspec->portcntrs) + qib_dev_err(dd, "Failed allocation for" + " portcounters\n"); + } +} + +static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, + u64 **cntrp) +{ + u32 ret; + + if (namep) { + ret = dd->cspec->cntrnamelen; + if (pos >= ret) + ret = 0; /* final read after getting everything */ + else + *namep = (char *) cntr7322names; + } else { + u64 *cntr = dd->cspec->cntrs; + int i; + + ret = dd->cspec->ncntrs * sizeof(u64); + if (!cntr || pos >= ret) { + /* everything read, or couldn't get memory */ + ret = 0; + goto done; + } + *cntrp = cntr; + for (i = 0; i < dd->cspec->ncntrs; i++) + if (cntr7322indices[i] & _PORT_64BIT_FLAG) + *cntr++ = read_7322_creg(dd, + cntr7322indices[i] & + _PORT_CNTR_IDXMASK); + else + *cntr++ = read_7322_creg32(dd, + cntr7322indices[i]); + } +done: + return ret; +} + +static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, + char **namep, u64 **cntrp) +{ + u32 ret; + + if (namep) { + ret = dd->cspec->portcntrnamelen; + if (pos >= ret) + ret = 0; /* final read after getting everything */ + else + *namep = (char *)portcntr7322names; + } else { + struct qib_pportdata *ppd = &dd->pport[port]; + u64 *cntr = ppd->cpspec->portcntrs; + int i; + + ret = dd->cspec->nportcntrs * sizeof(u64); + if (!cntr || pos >= ret) { + /* everything read, or couldn't get memory */ + ret = 0; + goto done; + } + *cntrp = cntr; + for (i = 0; i < dd->cspec->nportcntrs; i++) { + if (portcntr7322indices[i] & _PORT_VIRT_FLAG) + *cntr++ = qib_portcntr_7322(ppd, + portcntr7322indices[i] & + _PORT_CNTR_IDXMASK); + else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) + *cntr++ = read_7322_creg_port(ppd, + portcntr7322indices[i] & + _PORT_CNTR_IDXMASK); + else + *cntr++ = read_7322_creg32_port(ppd, + portcntr7322indices[i]); + } + } +done: + return ret; +} + +/** + * qib_get_7322_faststats - get word counters from chip before they overflow + * @opaque - contains a pointer to the qlogic_ib device qib_devdata + * + * VESTIGIAL IBA7322 has no "small fast counters", so the only + * real purpose of this function is to maintain the notion of + * "active time", which in turn is only logged into the eeprom, + * which we don;t have, yet, for 7322-based boards. + * + * called from add_timer + */ +static void qib_get_7322_faststats(unsigned long opaque) +{ + struct qib_devdata *dd = (struct qib_devdata *) opaque; + struct qib_pportdata *ppd; + unsigned long flags; + u64 traffic_wds; + int pidx; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + /* + * If port isn't enabled or not operational ports, or + * diags is running (can cause memory diags to fail) + * skip this port this time. + */ + if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) + || dd->diag_client) + continue; + + /* + * Maintain an activity timer, based on traffic + * exceeding a threshold, so we need to check the word-counts + * even if they are 64-bit. + */ + traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + + qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); + spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); + traffic_wds -= ppd->dd->traffic_wds; + ppd->dd->traffic_wds += traffic_wds; + if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD) + atomic_add(ACTIVITY_TIMER, &ppd->dd->active_time); + spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); + if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & + QIB_IB_QDR) && + (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | + QIBL_LINKACTIVE)) && + ppd->cpspec->qdr_dfe_time && + time_after64(get_jiffies_64(), ppd->cpspec->qdr_dfe_time)) { + ppd->cpspec->qdr_dfe_on = 0; + + qib_write_kreg_port(ppd, krp_static_adapt_dis(2), + ppd->dd->cspec->r1 ? + QDR_STATIC_ADAPT_INIT_R1 : + QDR_STATIC_ADAPT_INIT); + force_h1(ppd); + } + } + mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); +} + +/* + * If we were using MSIx, try to fallback to INTx. + */ +static int qib_7322_intr_fallback(struct qib_devdata *dd) +{ + if (!dd->cspec->num_msix_entries) + return 0; /* already using INTx */ + + qib_devinfo(dd->pcidev, "MSIx interrupt not detected," + " trying INTx interrupts\n"); + qib_7322_nomsix(dd); + qib_enable_intx(dd->pcidev); + qib_setup_7322_interrupt(dd, 0); + return 1; +} + +/* + * Reset the XGXS (between serdes and IBC). Slightly less intrusive + * than resetting the IBC or external link state, and useful in some + * cases to cause some retraining. To do this right, we reset IBC + * as well, then return to previous state (which may be still in reset) + * NOTE: some callers of this "know" this writes the current value + * of cpspec->ibcctrl_a as part of it's operation, so if that changes, + * check all callers. + */ +static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) +{ + u64 val; + struct qib_devdata *dd = ppd->dd; + const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | + SYM_MASK(IBPCSConfig_0, xcv_treset) | + SYM_MASK(IBPCSConfig_0, tx_rx_reset); + + val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a & + ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); + + qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); + qib_read_kreg32(dd, kr_scratch); + qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); + qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); + qib_write_kreg(dd, kr_scratch, 0ULL); +} + +/* + * This code for non-IBTA-compliant IB speed negotiation is only known to + * work for the SDR to DDR transition, and only between an HCA and a switch + * with recent firmware. It is based on observed heuristics, rather than + * actual knowledge of the non-compliant speed negotiation. + * It has a number of hard-coded fields, since the hope is to rewrite this + * when a spec is available on how the negoation is intended to work. + */ +static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, + u32 dcnt, u32 *data) +{ + int i; + u64 pbc; + u32 __iomem *piobuf; + u32 pnum, control, len; + struct qib_devdata *dd = ppd->dd; + + i = 0; + len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ + control = qib_7322_setpbc_control(ppd, len, 0, 15); + pbc = ((u64) control << 32) | len; + while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { + if (i++ > 15) + return; + udelay(2); + } + /* disable header check on this packet, since it can't be valid */ + dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); + writeq(pbc, piobuf); + qib_flush_wc(); + qib_pio_copy(piobuf + 2, hdr, 7); + qib_pio_copy(piobuf + 9, data, dcnt); + if (dd->flags & QIB_USE_SPCL_TRIG) { + u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; + + qib_flush_wc(); + __raw_writel(0xaebecede, piobuf + spcl_off); + } + qib_flush_wc(); + qib_sendbuf_done(dd, pnum); + /* and re-enable hdr check */ + dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); +} + +/* + * _start packet gets sent twice at start, _done gets sent twice at end + */ +static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) +{ + struct qib_devdata *dd = ppd->dd; + static u32 swapped; + u32 dw, i, hcnt, dcnt, *data; + static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; + static u32 madpayload_start[0x40] = { + 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, + 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, + 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ + }; + static u32 madpayload_done[0x40] = { + 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, + 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, + 0x40000001, 0x1388, 0x15e, /* rest 0's */ + }; + + dcnt = ARRAY_SIZE(madpayload_start); + hcnt = ARRAY_SIZE(hdr); + if (!swapped) { + /* for maintainability, do it at runtime */ + for (i = 0; i < hcnt; i++) { + dw = (__force u32) cpu_to_be32(hdr[i]); + hdr[i] = dw; + } + for (i = 0; i < dcnt; i++) { + dw = (__force u32) cpu_to_be32(madpayload_start[i]); + madpayload_start[i] = dw; + dw = (__force u32) cpu_to_be32(madpayload_done[i]); + madpayload_done[i] = dw; + } + swapped = 1; + } + + data = which ? madpayload_done : madpayload_start; + + autoneg_7322_sendpkt(ppd, hdr, dcnt, data); + qib_read_kreg64(dd, kr_scratch); + udelay(2); + autoneg_7322_sendpkt(ppd, hdr, dcnt, data); + qib_read_kreg64(dd, kr_scratch); + udelay(2); +} + +/* + * Do the absolute minimum to cause an IB speed change, and make it + * ready, but don't actually trigger the change. The caller will + * do that when ready (if link is in Polling training state, it will + * happen immediately, otherwise when link next goes down) + * + * This routine should only be used as part of the DDR autonegotation + * code for devices that are not compliant with IB 1.2 (or code that + * fixes things up for same). + * + * When link has gone down, and autoneg enabled, or autoneg has + * failed and we give up until next time we set both speeds, and + * then we want IBTA enabled as well as "use max enabled speed. + */ +static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) +{ + u64 newctrlb; + newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | + IBA7322_IBC_IBTA_1_2_MASK | + IBA7322_IBC_MAX_SPEED_MASK); + + if (speed & (speed - 1)) /* multiple speeds */ + newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | + IBA7322_IBC_IBTA_1_2_MASK | + IBA7322_IBC_MAX_SPEED_MASK; + else + newctrlb |= speed == QIB_IB_QDR ? + IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : + ((speed == QIB_IB_DDR ? + IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); + + if (newctrlb == ppd->cpspec->ibcctrl_b) + return; + + ppd->cpspec->ibcctrl_b = newctrlb; + qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); + qib_write_kreg(ppd->dd, kr_scratch, 0); +} + +/* + * This routine is only used when we are not talking to another + * IB 1.2-compliant device that we think can do DDR. + * (This includes all existing switch chips as of Oct 2007.) + * 1.2-compliant devices go directly to DDR prior to reaching INIT + */ +static void try_7322_autoneg(struct qib_pportdata *ppd) +{ + unsigned long flags; + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_AUTONEG_INPROG; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + qib_autoneg_7322_send(ppd, 0); + set_7322_ibspeed_fast(ppd, QIB_IB_DDR); + qib_7322_mini_pcs_reset(ppd); + /* 2 msec is minimum length of a poll cycle */ + schedule_delayed_work(&ppd->cpspec->autoneg_work, + msecs_to_jiffies(2)); +} + +/* + * Handle the empirically determined mechanism for auto-negotiation + * of DDR speed with switches. + */ +static void autoneg_7322_work(struct work_struct *work) +{ + struct qib_pportdata *ppd; + struct qib_devdata *dd; + u64 startms; + u32 i; + unsigned long flags; + + ppd = container_of(work, struct qib_chippport_specific, + autoneg_work.work)->ppd; + dd = ppd->dd; + + startms = jiffies_to_msecs(jiffies); + + /* + * Busy wait for this first part, it should be at most a + * few hundred usec, since we scheduled ourselves for 2msec. + */ + for (i = 0; i < 25; i++) { + if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) + == IB_7322_LT_STATE_POLLQUIET) { + qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); + break; + } + udelay(100); + } + + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) + goto done; /* we got there early or told to stop */ + + /* we expect this to timeout */ + if (wait_event_timeout(ppd->cpspec->autoneg_wait, + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), + msecs_to_jiffies(90))) + goto done; + qib_7322_mini_pcs_reset(ppd); + + /* we expect this to timeout */ + if (wait_event_timeout(ppd->cpspec->autoneg_wait, + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), + msecs_to_jiffies(1700))) + goto done; + qib_7322_mini_pcs_reset(ppd); + + set_7322_ibspeed_fast(ppd, QIB_IB_SDR); + + /* + * Wait up to 250 msec for link to train and get to INIT at DDR; + * this should terminate early. + */ + wait_event_timeout(ppd->cpspec->autoneg_wait, + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), + msecs_to_jiffies(250)); +done: + if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; + if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { + ppd->lflags |= QIBL_IB_AUTONEG_FAILED; + ppd->cpspec->autoneg_tries = 0; + } + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); + } +} + +/* + * This routine is used to request IPG set in the QLogic switch. + * Only called if r1. + */ +static void try_7322_ipg(struct qib_pportdata *ppd) +{ + struct qib_ibport *ibp = &ppd->ibport_data; + struct ib_mad_send_buf *send_buf; + struct ib_mad_agent *agent; + struct ib_smp *smp; + unsigned delay; + int ret; + + agent = ibp->send_agent; + if (!agent) + goto retry; + + send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, + IB_MGMT_MAD_DATA, GFP_ATOMIC); + if (IS_ERR(send_buf)) + goto retry; + + if (!ibp->smi_ah) { + struct ib_ah_attr attr; + struct ib_ah *ah; + + memset(&attr, 0, sizeof attr); + attr.dlid = be16_to_cpu(IB_LID_PERMISSIVE); + attr.port_num = ppd->port; + ah = ib_create_ah(ibp->qp0->ibqp.pd, &attr); + if (IS_ERR(ah)) + ret = -EINVAL; + else { + send_buf->ah = ah; + ibp->smi_ah = to_iah(ah); + ret = 0; + } + } else { + send_buf->ah = &ibp->smi_ah->ibah; + ret = 0; + } + + smp = send_buf->mad; + smp->base_version = IB_MGMT_BASE_VERSION; + smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; + smp->class_version = 1; + smp->method = IB_MGMT_METHOD_SEND; + smp->hop_cnt = 1; + smp->attr_id = QIB_VENDOR_IPG; + smp->attr_mod = 0; + + if (!ret) + ret = ib_post_send_mad(send_buf, NULL); + if (ret) + ib_free_send_mad(send_buf); +retry: + delay = 2 << ppd->cpspec->ipg_tries; + schedule_delayed_work(&ppd->cpspec->ipg_work, msecs_to_jiffies(delay)); +} + +/* + * Timeout handler for setting IPG. + * Only called if r1. + */ +static void ipg_7322_work(struct work_struct *work) +{ + struct qib_pportdata *ppd; + + ppd = container_of(work, struct qib_chippport_specific, + ipg_work.work)->ppd; + if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) + && ++ppd->cpspec->ipg_tries <= 10) + try_7322_ipg(ppd); +} + +static u32 qib_7322_iblink_state(u64 ibcs) +{ + u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); + + switch (state) { + case IB_7322_L_STATE_INIT: + state = IB_PORT_INIT; + break; + case IB_7322_L_STATE_ARM: + state = IB_PORT_ARMED; + break; + case IB_7322_L_STATE_ACTIVE: + /* fall through */ + case IB_7322_L_STATE_ACT_DEFER: + state = IB_PORT_ACTIVE; + break; + default: /* fall through */ + case IB_7322_L_STATE_DOWN: + state = IB_PORT_DOWN; + break; + } + return state; +} + +/* returns the IBTA port state, rather than the IBC link training state */ +static u8 qib_7322_phys_portstate(u64 ibcs) +{ + u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); + return qib_7322_physportstate[state]; +} + +static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) +{ + int ret = 0, symadj = 0; + unsigned long flags; + int mult; + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + + /* Update our picture of width and speed from chip */ + if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { + ppd->link_speed_active = QIB_IB_QDR; + mult = 4; + } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { + ppd->link_speed_active = QIB_IB_DDR; + mult = 2; + } else { + ppd->link_speed_active = QIB_IB_SDR; + mult = 1; + } + if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { + ppd->link_width_active = IB_WIDTH_4X; + mult *= 4; + } else + ppd->link_width_active = IB_WIDTH_1X; + ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; + + if (!ibup) { + u64 clr; + + /* Link went down. */ + /* do IPG MAD again after linkdown, even if last time failed */ + ppd->cpspec->ipg_tries = 0; + clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & + (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | + SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); + if (clr) + qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); + if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | + QIBL_IB_AUTONEG_INPROG))) + set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + /* unlock the Tx settings, speed may change */ + qib_write_kreg_port(ppd, krp_tx_deemph_override, + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + reset_tx_deemphasis_override)); + qib_cancel_sends(ppd); + /* on link down, ensure sane pcs state */ + qib_7322_mini_pcs_reset(ppd); + spin_lock_irqsave(&ppd->sdma_lock, flags); + if (__qib_sdma_running(ppd)) + __qib_sdma_process_event(ppd, + qib_sdma_event_e70_go_idle); + spin_unlock_irqrestore(&ppd->sdma_lock, flags); + } + clr = read_7322_creg32_port(ppd, crp_iblinkdown); + if (clr == ppd->cpspec->iblnkdownsnap) + ppd->cpspec->iblnkdowndelta++; + } else { + if (qib_compat_ddr_negotiate && + !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | + QIBL_IB_AUTONEG_INPROG)) && + ppd->link_speed_active == QIB_IB_SDR && + (ppd->link_speed_enabled & QIB_IB_DDR) + && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { + /* we are SDR, and auto-negotiation enabled */ + ++ppd->cpspec->autoneg_tries; + if (!ppd->cpspec->ibdeltainprog) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymdelta += + read_7322_creg32_port(ppd, + crp_ibsymbolerr) - + ppd->cpspec->ibsymsnap; + ppd->cpspec->iblnkerrdelta += + read_7322_creg32_port(ppd, + crp_iblinkerrrecov) - + ppd->cpspec->iblnkerrsnap; + } + try_7322_autoneg(ppd); + ret = 1; /* no other IB status change processing */ + } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && + ppd->link_speed_active == QIB_IB_SDR) { + qib_autoneg_7322_send(ppd, 1); + set_7322_ibspeed_fast(ppd, QIB_IB_DDR); + qib_7322_mini_pcs_reset(ppd); + udelay(2); + ret = 1; /* no other IB status change processing */ + } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && + (ppd->link_speed_active & QIB_IB_DDR)) { + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | + QIBL_IB_AUTONEG_FAILED); + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + ppd->cpspec->autoneg_tries = 0; + /* re-enable SDR, for next link down */ + set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); + wake_up(&ppd->cpspec->autoneg_wait); + symadj = 1; + } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { + /* + * Clear autoneg failure flag, and do setup + * so we'll try next time link goes down and + * back to INIT (possibly connected to a + * different device). + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; + symadj = 1; + } + if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + symadj = 1; + if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) + try_7322_ipg(ppd); + if (!ppd->cpspec->recovery_init) + setup_7322_link_recovery(ppd, 0); + ppd->cpspec->qdr_dfe_time = jiffies + + msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); + } + ppd->cpspec->ibmalfusesnap = 0; + ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, + crp_errlink); + } + if (symadj) { + ppd->cpspec->iblnkdownsnap = + read_7322_creg32_port(ppd, crp_iblinkdown); + if (ppd->cpspec->ibdeltainprog) { + ppd->cpspec->ibdeltainprog = 0; + ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, + crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; + ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, + crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; + } + } else if (!ibup && qib_compat_ddr_negotiate && + !ppd->cpspec->ibdeltainprog && + !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + ppd->cpspec->ibdeltainprog = 1; + ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, + crp_ibsymbolerr); + ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, + crp_iblinkerrrecov); + } + + if (!ret) + qib_setup_7322_setextled(ppd, ibup); + return ret; +} + +/* + * Does read/modify/write to appropriate registers to + * set output and direction bits selected by mask. + * these are in their canonical postions (e.g. lsb of + * dir will end up in D48 of extctrl on existing chips). + * returns contents of GP Inputs. + */ +static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) +{ + u64 read_val, new_out; + unsigned long flags; + + if (mask) { + /* some bits being written, lock access to GPIO */ + dir &= mask; + out &= mask; + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); + dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); + new_out = (dd->cspec->gpio_out & ~mask) | out; + + qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); + qib_write_kreg(dd, kr_gpio_out, new_out); + dd->cspec->gpio_out = new_out; + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); + } + /* + * It is unlikely that a read at this time would get valid + * data on a pin whose direction line was set in the same + * call to this function. We include the read here because + * that allows us to potentially combine a change on one pin with + * a read on another, and because the old code did something like + * this. + */ + read_val = qib_read_kreg64(dd, kr_extstatus); + return SYM_FIELD(read_val, EXTStatus, GPIOIn); +} + +/* Enable writes to config EEPROM, if possible. Returns previous state */ +static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) +{ + int prev_wen; + u32 mask; + + mask = 1 << QIB_EEPROM_WEN_NUM; + prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; + gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); + + return prev_wen & 1; +} + +/* + * Read fundamental info we need to use the chip. These are + * the registers that describe chip capabilities, and are + * saved in shadow registers. + */ +static void get_7322_chip_params(struct qib_devdata *dd) +{ + u64 val; + u32 piobufs; + int mtu; + + dd->palign = qib_read_kreg32(dd, kr_pagealign); + + dd->uregbase = qib_read_kreg32(dd, kr_userregbase); + + dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); + dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); + dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); + dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); + dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; + + val = qib_read_kreg64(dd, kr_sendpiobufcnt); + dd->piobcnt2k = val & ~0U; + dd->piobcnt4k = val >> 32; + val = qib_read_kreg64(dd, kr_sendpiosize); + dd->piosize2k = val & ~0U; + dd->piosize4k = val >> 32; + + mtu = ib_mtu_enum_to_int(qib_ibmtu); + if (mtu == -1) + mtu = QIB_DEFAULT_MTU; + dd->pport[0].ibmtu = (u32)mtu; + dd->pport[1].ibmtu = (u32)mtu; + + /* these may be adjusted in init_chip_wc_pat() */ + dd->pio2kbase = (u32 __iomem *) + ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); + dd->pio4kbase = (u32 __iomem *) + ((char __iomem *) dd->kregbase + + (dd->piobufbase >> 32)); + /* + * 4K buffers take 2 pages; we use roundup just to be + * paranoid; we calculate it once here, rather than on + * ever buf allocate + */ + dd->align4k = ALIGN(dd->piosize4k, dd->palign); + + piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; + + dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / + (sizeof(u64) * BITS_PER_BYTE / 2); +} + +/* + * The chip base addresses in cspec and cpspec have to be set + * after possible init_chip_wc_pat(), rather than in + * get_7322_chip_params(), so split out as separate function + */ +static void qib_7322_set_baseaddrs(struct qib_devdata *dd) +{ + u32 cregbase; + cregbase = qib_read_kreg32(dd, kr_counterregbase); + + dd->cspec->cregbase = (u64 __iomem *)(cregbase + + (char __iomem *)dd->kregbase); + + dd->egrtidbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + dd->rcvegrbase); + + /* port registers are defined as relative to base of chip */ + dd->pport[0].cpspec->kpregbase = + (u64 __iomem *)((char __iomem *)dd->kregbase); + dd->pport[1].cpspec->kpregbase = + (u64 __iomem *)(dd->palign + + (char __iomem *)dd->kregbase); + dd->pport[0].cpspec->cpregbase = + (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], + kr_counterregbase) + (char __iomem *)dd->kregbase); + dd->pport[1].cpspec->cpregbase = + (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], + kr_counterregbase) + (char __iomem *)dd->kregbase); +} + +/* + * This is a fairly special-purpose observer, so we only support + * the port-specific parts of SendCtrl + */ + +#define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ + SYM_MASK(SendCtrl_0, SDmaEnable) | \ + SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ + SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ + SYM_MASK(SendCtrl_0, SDmaHalt) | \ + SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ + SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) + +static int sendctrl_hook(struct qib_devdata *dd, + const struct diag_observer *op, u32 offs, + u64 *data, u64 mask, int only_32) +{ + unsigned long flags; + unsigned idx; + unsigned pidx; + struct qib_pportdata *ppd = NULL; + u64 local_data, all_bits; + + /* + * The fixed correspondence between Physical ports and pports is + * severed. We need to hunt for the ppd that corresponds + * to the offset we got. And we have to do that without admitting + * we know the stride, apparently. + */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + u64 __iomem *psptr; + u32 psoffs; + + ppd = dd->pport + pidx; + if (!ppd->cpspec->kpregbase) + continue; + + psptr = ppd->cpspec->kpregbase + krp_sendctrl; + psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); + if (psoffs == offs) + break; + } + + /* If pport is not being managed by driver, just avoid shadows. */ + if (pidx >= dd->num_pports) + ppd = NULL; + + /* In any case, "idx" is flat index in kreg space */ + idx = offs / sizeof(u64); + + all_bits = ~0ULL; + if (only_32) + all_bits >>= 32; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if (!ppd || (mask & all_bits) != all_bits) { + /* + * At least some mask bits are zero, so we need + * to read. The judgement call is whether from + * reg or shadow. First-cut: read reg, and complain + * if any bits which should be shadowed are different + * from their shadowed value. + */ + if (only_32) + local_data = (u64)qib_read_kreg32(dd, idx); + else + local_data = qib_read_kreg64(dd, idx); + *data = (local_data & ~mask) | (*data & mask); + } + if (mask) { + /* + * At least some mask bits are one, so we need + * to write, but only shadow some bits. + */ + u64 sval, tval; /* Shadowed, transient */ + + /* + * New shadow val is bits we don't want to touch, + * ORed with bits we do, that are intended for shadow. + */ + if (ppd) { + sval = ppd->p_sendctrl & ~mask; + sval |= *data & SENDCTRL_SHADOWED & mask; + ppd->p_sendctrl = sval; + } else + sval = *data & SENDCTRL_SHADOWED & mask; + tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); + qib_write_kreg(dd, idx, tval); + qib_write_kreg(dd, kr_scratch, 0Ull); + } + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + return only_32 ? 4 : 8; +} + +static const struct diag_observer sendctrl_0_observer = { + sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), + KREG_IDX(SendCtrl_0) * sizeof(u64) +}; + +static const struct diag_observer sendctrl_1_observer = { + sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), + KREG_IDX(SendCtrl_1) * sizeof(u64) +}; + +static ushort sdma_fetch_prio = 8; +module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); +MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); + +/* Besides logging QSFP events, we set appropriate TxDDS values */ +static void init_txdds_table(struct qib_pportdata *ppd, int override); + +static void qsfp_7322_event(struct work_struct *work) +{ + struct qib_qsfp_data *qd; + struct qib_pportdata *ppd; + u64 pwrup; + int ret; + u32 le2; + + qd = container_of(work, struct qib_qsfp_data, work); + ppd = qd->ppd; + pwrup = qd->t_insert + msecs_to_jiffies(QSFP_PWR_LAG_MSEC); + + /* + * Some QSFP's not only do not respond until the full power-up + * time, but may behave badly if we try. So hold off responding + * to insertion. + */ + while (1) { + u64 now = get_jiffies_64(); + if (time_after64(now, pwrup)) + break; + msleep(1); + } + ret = qib_refresh_qsfp_cache(ppd, &qd->cache); + /* + * Need to change LE2 back to defaults if we couldn't + * read the cable type (to handle cable swaps), so do this + * even on failure to read cable information. We don't + * get here for QME, so IS_QME check not needed here. + */ + le2 = (!ret && qd->cache.atten[1] >= qib_long_atten && + !ppd->dd->cspec->r1 && QSFP_IS_CU(qd->cache.tech)) ? + LE2_5m : LE2_DEFAULT; + ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); + init_txdds_table(ppd, 0); +} + +/* + * There is little we can do but complain to the user if QSFP + * initialization fails. + */ +static void qib_init_7322_qsfp(struct qib_pportdata *ppd) +{ + unsigned long flags; + struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; + struct qib_devdata *dd = ppd->dd; + u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; + + mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); + qd->ppd = ppd; + qib_qsfp_init(qd, qsfp_7322_event); + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); + dd->cspec->gpio_mask |= mod_prs_bit; + qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); + qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); +} + +/* + * called at device initialization time, and also if the txselect + * module parameter is changed. This is used for cables that don't + * have valid QSFP EEPROMs (not present, or attenuation is zero). + * We initialize to the default, then if there is a specific + * unit,port match, we use that (and set it immediately, for the + * current speed, if the link is at INIT or better). + * String format is "default# unit#,port#=# ... u,p=#", separators must + * be a SPACE character. A newline terminates. The u,p=# tuples may + * optionally have "u,p=#,#", where the final # is the H1 value + * The last specific match is used (actually, all are used, but last + * one is the one that winds up set); if none at all, fall back on default. + */ +static void set_no_qsfp_atten(struct qib_devdata *dd, int change) +{ + char *nxt, *str; + u32 pidx, unit, port, deflt, h1; + unsigned long val; + int any = 0, seth1; + + str = txselect_list; + + /* default number is validated in setup_txselect() */ + deflt = simple_strtoul(str, &nxt, 0); + for (pidx = 0; pidx < dd->num_pports; ++pidx) + dd->pport[pidx].cpspec->no_eep = deflt; + + while (*nxt && nxt[1]) { + str = ++nxt; + unit = simple_strtoul(str, &nxt, 0); + if (nxt == str || !*nxt || *nxt != ',') { + while (*nxt && *nxt++ != ' ') /* skip to next, if any */ + ; + continue; + } + str = ++nxt; + port = simple_strtoul(str, &nxt, 0); + if (nxt == str || *nxt != '=') { + while (*nxt && *nxt++ != ' ') /* skip to next, if any */ + ; + continue; + } + str = ++nxt; + val = simple_strtoul(str, &nxt, 0); + if (nxt == str) { + while (*nxt && *nxt++ != ' ') /* skip to next, if any */ + ; + continue; + } + if (val >= TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ) + continue; + seth1 = 0; + h1 = 0; /* gcc thinks it might be used uninitted */ + if (*nxt == ',' && nxt[1]) { + str = ++nxt; + h1 = (u32)simple_strtoul(str, &nxt, 0); + if (nxt == str) + while (*nxt && *nxt++ != ' ') /* skip */ + ; + else + seth1 = 1; + } + for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; + ++pidx) { + struct qib_pportdata *ppd = &dd->pport[pidx]; + + if (ppd->port != port || !ppd->link_speed_supported) + continue; + ppd->cpspec->no_eep = val; + /* now change the IBC and serdes, overriding generic */ + init_txdds_table(ppd, 1); + any++; + } + if (*nxt == '\n') + break; /* done */ + } + if (change && !any) { + /* no specific setting, use the default. + * Change the IBC and serdes, but since it's + * general, don't override specific settings. + */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) + if (dd->pport[pidx].link_speed_supported) + init_txdds_table(&dd->pport[pidx], 0); + } +} + +/* handle the txselect parameter changing */ +static int setup_txselect(const char *str, struct kernel_param *kp) +{ + struct qib_devdata *dd; + unsigned long val; + char *n; + if (strlen(str) >= MAX_ATTEN_LEN) { + printk(KERN_INFO QIB_DRV_NAME " txselect_values string " + "too long\n"); + return -ENOSPC; + } + val = simple_strtoul(str, &n, 0); + if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { + printk(KERN_INFO QIB_DRV_NAME + "txselect_values must start with a number < %d\n", + TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); + return -EINVAL; + } + strcpy(txselect_list, str); + + list_for_each_entry(dd, &qib_dev_list, list) + if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) + set_no_qsfp_atten(dd, 1); + return 0; +} + +/* + * Write the final few registers that depend on some of the + * init setup. Done late in init, just before bringing up + * the serdes. + */ +static int qib_late_7322_initreg(struct qib_devdata *dd) +{ + int ret = 0, n; + u64 val; + + qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); + qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); + qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); + qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); + val = qib_read_kreg64(dd, kr_sendpioavailaddr); + if (val != dd->pioavailregs_phys) { + qib_dev_err(dd, "Catastrophic software error, " + "SendPIOAvailAddr written as %lx, " + "read back as %llx\n", + (unsigned long) dd->pioavailregs_phys, + (unsigned long long) val); + ret = -EINVAL; + } + + n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; + qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); + /* driver sends get pkey, lid, etc. checking also, to catch bugs */ + qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); + + qib_register_observer(dd, &sendctrl_0_observer); + qib_register_observer(dd, &sendctrl_1_observer); + + dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; + qib_write_kreg(dd, kr_control, dd->control); + /* + * Set SendDmaFetchPriority and init Tx params, including + * QSFP handler on boards that have QSFP. + * First set our default attenuation entry for cables that + * don't have valid attenuation. + */ + set_no_qsfp_atten(dd, 0); + for (n = 0; n < dd->num_pports; ++n) { + struct qib_pportdata *ppd = dd->pport + n; + + qib_write_kreg_port(ppd, krp_senddmaprioritythld, + sdma_fetch_prio & 0xf); + /* Initialize qsfp if present on board. */ + if (dd->flags & QIB_HAS_QSFP) + qib_init_7322_qsfp(ppd); + } + dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; + qib_write_kreg(dd, kr_control, dd->control); + + return ret; +} + +/* per IB port errors. */ +#define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ + MASK_ACROSS(8, 15)) +#define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) +#define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ + MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ + MASK_ACROSS(0, 11)) + +/* + * Write the initialization per-port registers that need to be done at + * driver load and after reset completes (i.e., that aren't done as part + * of other init procedures called from qib_init.c). + * Some of these should be redundant on reset, but play safe. + */ +static void write_7322_init_portregs(struct qib_pportdata *ppd) +{ + u64 val; + int i; + + if (!ppd->link_speed_supported) { + /* no buffer credits for this port */ + for (i = 1; i < 8; i++) + qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); + qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); + qib_write_kreg(ppd->dd, kr_scratch, 0); + return; + } + + /* + * Set the number of supported virtual lanes in IBC, + * for flow control packet handling on unsupported VLs + */ + val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); + val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); + val |= (u64)(ppd->vls_supported - 1) << + SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); + qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); + + qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); + + /* enable tx header checking */ + qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | + IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | + IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); + + qib_write_kreg_port(ppd, krp_ncmodectrl, + SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); + + /* + * Unconditionally clear the bufmask bits. If SDMA is + * enabled, we'll set them appropriately later. + */ + qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); + qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); + qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); + if (ppd->dd->cspec->r1) + ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); +} + +/* + * Write the initialization per-device registers that need to be done at + * driver load and after reset completes (i.e., that aren't done as part + * of other init procedures called from qib_init.c). Also write per-port + * registers that are affected by overall device config, such as QP mapping + * Some of these should be redundant on reset, but play safe. + */ +static void write_7322_initregs(struct qib_devdata *dd) +{ + struct qib_pportdata *ppd; + int i, pidx; + u64 val; + + /* Set Multicast QPs received by port 2 to map to context one. */ + qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + unsigned n, regno; + unsigned long flags; + + if (!dd->qpn_mask || !dd->pport[pidx].link_speed_supported) + continue; + + ppd = &dd->pport[pidx]; + + /* be paranoid against later code motion, etc. */ + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); + + /* Initialize QP to context mapping */ + regno = krp_rcvqpmaptable; + val = 0; + if (dd->num_pports > 1) + n = dd->first_user_ctxt / dd->num_pports; + else + n = dd->first_user_ctxt - 1; + for (i = 0; i < 32; ) { + unsigned ctxt; + + if (dd->num_pports > 1) + ctxt = (i % n) * dd->num_pports + pidx; + else if (i % n) + ctxt = (i % n) + 1; + else + ctxt = ppd->hw_pidx; + val |= ctxt << (5 * (i % 6)); + i++; + if (i % 6 == 0) { + qib_write_kreg_port(ppd, regno, val); + val = 0; + regno++; + } + } + qib_write_kreg_port(ppd, regno, val); + } + + /* + * Setup up interrupt mitigation for kernel contexts, but + * not user contexts (user contexts use interrupts when + * stalled waiting for any packet, so want those interrupts + * right away). + */ + for (i = 0; i < dd->first_user_ctxt; i++) { + dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; + qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); + } + + /* + * Initialize as (disabled) rcvflow tables. Application code + * will setup each flow as it uses the flow. + * Doesn't clear any of the error bits that might be set. + */ + val = TIDFLOW_ERRBITS; /* these are W1C */ + for (i = 0; i < dd->ctxtcnt; i++) { + int flow; + for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) + qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); + } + + /* + * dual cards init to dual port recovery, single port cards to + * the one port. Dual port cards may later adjust to 1 port, + * and then back to dual port if both ports are connected + * */ + if (dd->num_pports) + setup_7322_link_recovery(dd->pport, dd->num_pports > 1); +} + +static int qib_init_7322_variables(struct qib_devdata *dd) +{ + struct qib_pportdata *ppd; + unsigned features, pidx, sbufcnt; + int ret, mtu; + u32 sbufs, updthresh; + + /* pport structs are contiguous, allocated after devdata */ + ppd = (struct qib_pportdata *)(dd + 1); + dd->pport = ppd; + ppd[0].dd = dd; + ppd[1].dd = dd; + + dd->cspec = (struct qib_chip_specific *)(ppd + 2); + + ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); + ppd[1].cpspec = &ppd[0].cpspec[1]; + ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ + ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ + + spin_lock_init(&dd->cspec->rcvmod_lock); + spin_lock_init(&dd->cspec->gpio_lock); + + /* we haven't yet set QIB_PRESENT, so use read directly */ + dd->revision = readq(&dd->kregbase[kr_revision]); + + if ((dd->revision & 0xffffffffU) == 0xffffffffU) { + qib_dev_err(dd, "Revision register read failure, " + "giving up initialization\n"); + ret = -ENODEV; + goto bail; + } + dd->flags |= QIB_PRESENT; /* now register routines work */ + + dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); + dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); + dd->cspec->r1 = dd->minrev == 1; + + get_7322_chip_params(dd); + features = qib_7322_boardname(dd); + + /* now that piobcnt2k and 4k set, we can allocate these */ + sbufcnt = dd->piobcnt2k + dd->piobcnt4k + + NUM_VL15_BUFS + BITS_PER_LONG - 1; + sbufcnt /= BITS_PER_LONG; + dd->cspec->sendchkenable = kmalloc(sbufcnt * + sizeof(*dd->cspec->sendchkenable), GFP_KERNEL); + dd->cspec->sendgrhchk = kmalloc(sbufcnt * + sizeof(*dd->cspec->sendgrhchk), GFP_KERNEL); + dd->cspec->sendibchk = kmalloc(sbufcnt * + sizeof(*dd->cspec->sendibchk), GFP_KERNEL); + if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || + !dd->cspec->sendibchk) { + qib_dev_err(dd, "Failed allocation for hdrchk bitmaps\n"); + ret = -ENOMEM; + goto bail; + } + + ppd = dd->pport; + + /* + * GPIO bits for TWSI data and clock, + * used for serial EEPROM. + */ + dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; + dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; + dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; + + dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | + QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | + QIB_HAS_THRESH_UPDATE | + (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); + dd->flags |= qib_special_trigger ? + QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; + + /* + * Setup initial values. These may change when PAT is enabled, but + * we need these to do initial chip register accesses. + */ + qib_7322_set_baseaddrs(dd); + + mtu = ib_mtu_enum_to_int(qib_ibmtu); + if (mtu == -1) + mtu = QIB_DEFAULT_MTU; + + dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; + /* all hwerrors become interrupts, unless special purposed */ + dd->cspec->hwerrmask = ~0ULL; + /* link_recovery setup causes these errors, so ignore them, + * other than clearing them when they occur */ + dd->cspec->hwerrmask &= + ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | + SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | + HWE_MASK(LATriggered)); + + for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { + struct qib_chippport_specific *cp = ppd->cpspec; + ppd->link_speed_supported = features & PORT_SPD_CAP; + features >>= PORT_SPD_CAP_SHIFT; + if (!ppd->link_speed_supported) { + /* single port mode (7340, or configured) */ + dd->skip_kctxt_mask |= 1 << pidx; + if (pidx == 0) { + /* Make sure port is disabled. */ + qib_write_kreg_port(ppd, krp_rcvctrl, 0); + qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); + ppd[0] = ppd[1]; + dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, + IBSerdesPClkNotDetectMask_0) + | SYM_MASK(HwErrMask, + SDmaMemReadErrMask_0)); + dd->cspec->int_enable_mask &= ~( + SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | + SYM_MASK(IntMask, SDmaIdleIntMask_0) | + SYM_MASK(IntMask, SDmaProgressIntMask_0) | + SYM_MASK(IntMask, SDmaIntMask_0) | + SYM_MASK(IntMask, ErrIntMask_0) | + SYM_MASK(IntMask, SendDoneIntMask_0)); + } else { + /* Make sure port is disabled. */ + qib_write_kreg_port(ppd, krp_rcvctrl, 0); + qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); + dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, + IBSerdesPClkNotDetectMask_1) + | SYM_MASK(HwErrMask, + SDmaMemReadErrMask_1)); + dd->cspec->int_enable_mask &= ~( + SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | + SYM_MASK(IntMask, SDmaIdleIntMask_1) | + SYM_MASK(IntMask, SDmaProgressIntMask_1) | + SYM_MASK(IntMask, SDmaIntMask_1) | + SYM_MASK(IntMask, ErrIntMask_1) | + SYM_MASK(IntMask, SendDoneIntMask_1)); + } + continue; + } + + dd->num_pports++; + qib_init_pportdata(ppd, dd, pidx, dd->num_pports); + + ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; + ppd->link_width_enabled = IB_WIDTH_4X; + ppd->link_speed_enabled = ppd->link_speed_supported; + /* + * Set the initial values to reasonable default, will be set + * for real when link is up. + */ + ppd->link_width_active = IB_WIDTH_4X; + ppd->link_speed_active = QIB_IB_SDR; + ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; + switch (qib_num_cfg_vls) { + case 1: + ppd->vls_supported = IB_VL_VL0; + break; + case 2: + ppd->vls_supported = IB_VL_VL0_1; + break; + default: + qib_devinfo(dd->pcidev, + "Invalid num_vls %u, using 4 VLs\n", + qib_num_cfg_vls); + qib_num_cfg_vls = 4; + /* fall through */ + case 4: + ppd->vls_supported = IB_VL_VL0_3; + break; + case 8: + if (mtu <= 2048) + ppd->vls_supported = IB_VL_VL0_7; + else { + qib_devinfo(dd->pcidev, + "Invalid num_vls %u for MTU %d " + ", using 4 VLs\n", + qib_num_cfg_vls, mtu); + ppd->vls_supported = IB_VL_VL0_3; + qib_num_cfg_vls = 4; + } + break; + } + ppd->vls_operational = ppd->vls_supported; + + init_waitqueue_head(&cp->autoneg_wait); + INIT_DELAYED_WORK(&cp->autoneg_work, + autoneg_7322_work); + if (ppd->dd->cspec->r1) + INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); + + /* + * For Mez and similar cards, no qsfp info, so do + * the "cable info" setup here. Can be overridden + * in adapter-specific routines. + */ + if (!(ppd->dd->flags & QIB_HAS_QSFP)) { + if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd)) + qib_devinfo(ppd->dd->pcidev, "IB%u:%u: " + "Unknown mezzanine card type\n", + dd->unit, ppd->port); + cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; + /* + * Choose center value as default tx serdes setting + * until changed through module parameter. + */ + ppd->cpspec->no_eep = IS_QMH(dd) ? + TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; + } else + cp->h1_val = H1_FORCE_VAL; + + /* Avoid writes to chip for mini_init */ + if (!qib_mini_init) + write_7322_init_portregs(ppd); + + init_timer(&cp->chase_timer); + cp->chase_timer.function = reenable_chase; + cp->chase_timer.data = (unsigned long)ppd; + + ppd++; + } + + dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE; + dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE; + dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); + + /* we always allocate at least 2048 bytes for eager buffers */ + dd->rcvegrbufsize = max(mtu, 2048); + + qib_7322_tidtemplate(dd); + + /* + * We can request a receive interrupt for 1 or + * more packets from current offset. + */ + dd->rhdrhead_intr_off = + (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; + + /* setup the stats timer; the add_timer is done at end of init */ + init_timer(&dd->stats_timer); + dd->stats_timer.function = qib_get_7322_faststats; + dd->stats_timer.data = (unsigned long) dd; + + dd->ureg_align = 0x10000; /* 64KB alignment */ + + dd->piosize2kmax_dwords = dd->piosize2k >> 2; + + qib_7322_config_ctxts(dd); + qib_set_ctxtcnt(dd); + + if (qib_wc_pat) { + ret = init_chip_wc_pat(dd, NUM_VL15_BUFS * dd->align4k); + if (ret) + goto bail; + } + qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ + + ret = 0; + if (qib_mini_init) + goto bail; + if (!dd->num_pports) { + qib_dev_err(dd, "No ports enabled, giving up initialization\n"); + goto bail; /* no error, so can still figure out why err */ + } + + write_7322_initregs(dd); + ret = qib_create_ctxts(dd); + init_7322_cntrnames(dd); + + updthresh = 8U; /* update threshold */ + + /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. + * reserve the update threshold amount for other kernel use, such + * as sending SMI, MAD, and ACKs, or 3, whichever is greater, + * unless we aren't enabling SDMA, in which case we want to use + * all the 4k bufs for the kernel. + * if this was less than the update threshold, we could wait + * a long time for an update. Coded this way because we + * sometimes change the update threshold for various reasons, + * and we want this to remain robust. + */ + if (dd->flags & QIB_HAS_SEND_DMA) { + dd->cspec->sdmabufcnt = dd->piobcnt4k; + sbufs = updthresh > 3 ? updthresh : 3; + } else { + dd->cspec->sdmabufcnt = 0; + sbufs = dd->piobcnt4k; + } + dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - + dd->cspec->sdmabufcnt; + dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; + dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ + dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? + dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; + + /* + * If we have 16 user contexts, we will have 7 sbufs + * per context, so reduce the update threshold to match. We + * want to update before we actually run out, at low pbufs/ctxt + * so give ourselves some margin. + */ + if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) + updthresh = dd->pbufsctxt - 2; + dd->cspec->updthresh_dflt = updthresh; + dd->cspec->updthresh = updthresh; + + /* before full enable, no interrupts, no locking needed */ + dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) + << SYM_LSB(SendCtrl, AvailUpdThld)) | + SYM_MASK(SendCtrl, SendBufAvailPad64Byte); + + dd->psxmitwait_supported = 1; + dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; +bail: + if (!dd->ctxtcnt) + dd->ctxtcnt = 1; /* for other initialization code */ + + return ret; +} + +static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, + u32 *pbufnum) +{ + u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; + struct qib_devdata *dd = ppd->dd; + + /* last is same for 2k and 4k, because we use 4k if all 2k busy */ + if (pbc & PBC_7322_VL15_SEND) { + first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; + last = first; + } else { + if ((plen + 1) > dd->piosize2kmax_dwords) + first = dd->piobcnt2k; + else + first = 0; + last = dd->cspec->lastbuf_for_pio; + } + return qib_getsendbuf_range(dd, pbufnum, first, last); +} + +static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, + u32 start) +{ + qib_write_kreg_port(ppd, krp_psinterval, intv); + qib_write_kreg_port(ppd, krp_psstart, start); +} + +/* + * Must be called with sdma_lock held, or before init finished. + */ +static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) +{ + qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); +} + +static struct sdma_set_state_action sdma_7322_action_table[] = { + [qib_sdma_state_s00_hw_down] = { + .go_s99_running_tofalse = 1, + .op_enable = 0, + .op_intenable = 0, + .op_halt = 0, + .op_drain = 0, + }, + [qib_sdma_state_s10_hw_start_up_wait] = { + .op_enable = 0, + .op_intenable = 1, + .op_halt = 1, + .op_drain = 0, + }, + [qib_sdma_state_s20_idle] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + .op_drain = 0, + }, + [qib_sdma_state_s30_sw_clean_up_wait] = { + .op_enable = 0, + .op_intenable = 1, + .op_halt = 1, + .op_drain = 0, + }, + [qib_sdma_state_s40_hw_clean_up_wait] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + .op_drain = 0, + }, + [qib_sdma_state_s50_hw_halt_wait] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 1, + .op_drain = 1, + }, + [qib_sdma_state_s99_running] = { + .op_enable = 1, + .op_intenable = 1, + .op_halt = 0, + .op_drain = 0, + .go_s99_running_totrue = 1, + }, +}; + +static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) +{ + ppd->sdma_state.set_state_action = sdma_7322_action_table; +} + +static int init_sdma_7322_regs(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + unsigned lastbuf, erstbuf; + u64 senddmabufmask[3] = { 0 }; + int n, ret = 0; + + qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); + qib_sdma_7322_setlengen(ppd); + qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ + qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); + qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); + qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); + + if (dd->num_pports) + n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ + else + n = dd->cspec->sdmabufcnt; /* failsafe for init */ + erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - + ((dd->num_pports == 1 || ppd->port == 2) ? n : + dd->cspec->sdmabufcnt); + lastbuf = erstbuf + n; + + ppd->sdma_state.first_sendbuf = erstbuf; + ppd->sdma_state.last_sendbuf = lastbuf; + for (; erstbuf < lastbuf; ++erstbuf) { + unsigned word = erstbuf / BITS_PER_LONG; + unsigned bit = erstbuf & (BITS_PER_LONG - 1); + + BUG_ON(word >= 3); + senddmabufmask[word] |= 1ULL << bit; + } + qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); + qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); + qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); + return ret; +} + +/* sdma_lock must be held */ +static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + int sane; + int use_dmahead; + u16 swhead; + u16 swtail; + u16 cnt; + u16 hwhead; + + use_dmahead = __qib_sdma_running(ppd) && + (dd->flags & QIB_HAS_SDMA_TIMEOUT); +retry: + hwhead = use_dmahead ? + (u16) le64_to_cpu(*ppd->sdma_head_dma) : + (u16) qib_read_kreg_port(ppd, krp_senddmahead); + + swhead = ppd->sdma_descq_head; + swtail = ppd->sdma_descq_tail; + cnt = ppd->sdma_descq_cnt; + + if (swhead < swtail) + /* not wrapped */ + sane = (hwhead >= swhead) & (hwhead <= swtail); + else if (swhead > swtail) + /* wrapped around */ + sane = ((hwhead >= swhead) && (hwhead < cnt)) || + (hwhead <= swtail); + else + /* empty */ + sane = (hwhead == swhead); + + if (unlikely(!sane)) { + if (use_dmahead) { + /* try one more time, directly from the register */ + use_dmahead = 0; + goto retry; + } + /* proceed as if no progress */ + hwhead = swhead; + } + + return hwhead; +} + +static int qib_sdma_7322_busy(struct qib_pportdata *ppd) +{ + u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); + + return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || + (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || + !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || + !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); +} + +/* + * Compute the amount of delay before sending the next packet if the + * port's send rate differs from the static rate set for the QP. + * The delay affects the next packet and the amount of the delay is + * based on the length of the this packet. + */ +static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, + u8 srate, u8 vl) +{ + u8 snd_mult = ppd->delay_mult; + u8 rcv_mult = ib_rate_to_delay[srate]; + u32 ret; + + ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; + + /* Indicate VL15, else set the VL in the control word */ + if (vl == 15) + ret |= PBC_7322_VL15_SEND_CTRL; + else + ret |= vl << PBC_VL_NUM_LSB; + ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; + + return ret; +} + +/* + * Enable the per-port VL15 send buffers for use. + * They follow the rest of the buffers, without a config parameter. + * This was in initregs, but that is done before the shadow + * is set up, and this has to be done after the shadow is + * set up. + */ +static void qib_7322_initvl15_bufs(struct qib_devdata *dd) +{ + unsigned vl15bufs; + + vl15bufs = dd->piobcnt2k + dd->piobcnt4k; + qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, + TXCHK_CHG_TYPE_KERN, NULL); +} + +static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) +{ + if (rcd->ctxt < NUM_IB_PORTS) { + if (rcd->dd->num_pports > 1) { + rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; + rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; + } else { + rcd->rcvegrcnt = KCTXT0_EGRCNT; + rcd->rcvegr_tid_base = 0; + } + } else { + rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; + rcd->rcvegr_tid_base = KCTXT0_EGRCNT + + (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; + } +} + +#define QTXSLEEPS 5000 +static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, + u32 len, u32 which, struct qib_ctxtdata *rcd) +{ + int i; + const int last = start + len - 1; + const int lastr = last / BITS_PER_LONG; + u32 sleeps = 0; + int wait = rcd != NULL; + unsigned long flags; + + while (wait) { + unsigned long shadow; + int cstart, previ = -1; + + /* + * when flipping from kernel to user, we can't change + * the checking type if the buffer is allocated to the + * driver. It's OK the other direction, because it's + * from close, and we have just disarm'ed all the + * buffers. All the kernel to kernel changes are also + * OK. + */ + for (cstart = start; cstart <= last; cstart++) { + i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) + / BITS_PER_LONG; + if (i != previ) { + shadow = (unsigned long) + le64_to_cpu(dd->pioavailregs_dma[i]); + previ = i; + } + if (test_bit(((2 * cstart) + + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) + % BITS_PER_LONG, &shadow)) + break; + } + + if (cstart > last) + break; + + if (sleeps == QTXSLEEPS) + break; + /* make sure we see an updated copy next time around */ + sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + sleeps++; + msleep(1); + } + + switch (which) { + case TXCHK_CHG_TYPE_DIS1: + /* + * disable checking on a range; used by diags; just + * one buffer, but still written generically + */ + for (i = start; i <= last; i++) + clear_bit(i, dd->cspec->sendchkenable); + break; + + case TXCHK_CHG_TYPE_ENAB1: + /* + * (re)enable checking on a range; used by diags; just + * one buffer, but still written generically; read + * scratch to be sure buffer actually triggered, not + * just flushed from processor. + */ + qib_read_kreg32(dd, kr_scratch); + for (i = start; i <= last; i++) + set_bit(i, dd->cspec->sendchkenable); + break; + + case TXCHK_CHG_TYPE_KERN: + /* usable by kernel */ + for (i = start; i <= last; i++) { + set_bit(i, dd->cspec->sendibchk); + clear_bit(i, dd->cspec->sendgrhchk); + } + spin_lock_irqsave(&dd->uctxt_lock, flags); + /* see if we need to raise avail update threshold */ + for (i = dd->first_user_ctxt; + dd->cspec->updthresh != dd->cspec->updthresh_dflt + && i < dd->cfgctxts; i++) + if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && + ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) + < dd->cspec->updthresh_dflt) + break; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + if (i == dd->cfgctxts) { + spin_lock_irqsave(&dd->sendctrl_lock, flags); + dd->cspec->updthresh = dd->cspec->updthresh_dflt; + dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); + dd->sendctrl |= (dd->cspec->updthresh & + SYM_RMASK(SendCtrl, AvailUpdThld)) << + SYM_LSB(SendCtrl, AvailUpdThld); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + } + break; + + case TXCHK_CHG_TYPE_USER: + /* for user process */ + for (i = start; i <= last; i++) { + clear_bit(i, dd->cspec->sendibchk); + set_bit(i, dd->cspec->sendgrhchk); + } + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if (rcd && rcd->subctxt_cnt && ((rcd->piocnt + / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { + dd->cspec->updthresh = (rcd->piocnt / + rcd->subctxt_cnt) - 1; + dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); + dd->sendctrl |= (dd->cspec->updthresh & + SYM_RMASK(SendCtrl, AvailUpdThld)) + << SYM_LSB(SendCtrl, AvailUpdThld); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + } else + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + break; + + default: + break; + } + + for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) + qib_write_kreg(dd, kr_sendcheckmask + i, + dd->cspec->sendchkenable[i]); + + for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { + qib_write_kreg(dd, kr_sendgrhcheckmask + i, + dd->cspec->sendgrhchk[i]); + qib_write_kreg(dd, kr_sendibpktmask + i, + dd->cspec->sendibchk[i]); + } + + /* + * Be sure whatever we did was seen by the chip and acted upon, + * before we return. Mostly important for which >= 2. + */ + qib_read_kreg32(dd, kr_scratch); +} + + +/* useful for trigger analyzers, etc. */ +static void writescratch(struct qib_devdata *dd, u32 val) +{ + qib_write_kreg(dd, kr_scratch, val); +} + +/* Dummy for now, use chip regs soon */ +static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) +{ + return -ENXIO; +} + +/** + * qib_init_iba7322_funcs - set up the chip-specific function pointers + * @dev: the pci_dev for qlogic_ib device + * @ent: pci_device_id struct for this dev + * + * Also allocates, inits, and returns the devdata struct for this + * device instance + * + * This is global, and is called directly at init to set up the + * chip-specific function pointers for later use. + */ +struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct qib_devdata *dd; + int ret, i; + u32 tabsize, actual_cnt = 0; + + dd = qib_alloc_devdata(pdev, + NUM_IB_PORTS * sizeof(struct qib_pportdata) + + sizeof(struct qib_chip_specific) + + NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); + if (IS_ERR(dd)) + goto bail; + + dd->f_bringup_serdes = qib_7322_bringup_serdes; + dd->f_cleanup = qib_setup_7322_cleanup; + dd->f_clear_tids = qib_7322_clear_tids; + dd->f_free_irq = qib_7322_free_irq; + dd->f_get_base_info = qib_7322_get_base_info; + dd->f_get_msgheader = qib_7322_get_msgheader; + dd->f_getsendbuf = qib_7322_getsendbuf; + dd->f_gpio_mod = gpio_7322_mod; + dd->f_eeprom_wen = qib_7322_eeprom_wen; + dd->f_hdrqempty = qib_7322_hdrqempty; + dd->f_ib_updown = qib_7322_ib_updown; + dd->f_init_ctxt = qib_7322_init_ctxt; + dd->f_initvl15_bufs = qib_7322_initvl15_bufs; + dd->f_intr_fallback = qib_7322_intr_fallback; + dd->f_late_initreg = qib_late_7322_initreg; + dd->f_setpbc_control = qib_7322_setpbc_control; + dd->f_portcntr = qib_portcntr_7322; + dd->f_put_tid = qib_7322_put_tid; + dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; + dd->f_rcvctrl = rcvctrl_7322_mod; + dd->f_read_cntrs = qib_read_7322cntrs; + dd->f_read_portcntrs = qib_read_7322portcntrs; + dd->f_reset = qib_do_7322_reset; + dd->f_init_sdma_regs = init_sdma_7322_regs; + dd->f_sdma_busy = qib_sdma_7322_busy; + dd->f_sdma_gethead = qib_sdma_7322_gethead; + dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; + dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; + dd->f_sdma_update_tail = qib_sdma_update_7322_tail; + dd->f_sendctrl = sendctrl_7322_mod; + dd->f_set_armlaunch = qib_set_7322_armlaunch; + dd->f_set_cntr_sample = qib_set_cntr_7322_sample; + dd->f_iblink_state = qib_7322_iblink_state; + dd->f_ibphys_portstate = qib_7322_phys_portstate; + dd->f_get_ib_cfg = qib_7322_get_ib_cfg; + dd->f_set_ib_cfg = qib_7322_set_ib_cfg; + dd->f_set_ib_loopback = qib_7322_set_loopback; + dd->f_get_ib_table = qib_7322_get_ib_table; + dd->f_set_ib_table = qib_7322_set_ib_table; + dd->f_set_intr_state = qib_7322_set_intr_state; + dd->f_setextled = qib_setup_7322_setextled; + dd->f_txchk_change = qib_7322_txchk_change; + dd->f_update_usrhead = qib_update_7322_usrhead; + dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; + dd->f_xgxs_reset = qib_7322_mini_pcs_reset; + dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; + dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; + dd->f_sdma_init_early = qib_7322_sdma_init_early; + dd->f_writescratch = writescratch; + dd->f_tempsense_rd = qib_7322_tempsense_rd; + /* + * Do remaining PCIe setup and save PCIe values in dd. + * Any error printing is already done by the init code. + * On return, we have the chip mapped, but chip registers + * are not set up until start of qib_init_7322_variables. + */ + ret = qib_pcie_ddinit(dd, pdev, ent); + if (ret < 0) + goto bail_free; + + /* initialize chip-specific variables */ + ret = qib_init_7322_variables(dd); + if (ret) + goto bail_cleanup; + + if (qib_mini_init || !dd->num_pports) + goto bail; + + /* + * Determine number of vectors we want; depends on port count + * and number of configured kernel receive queues actually used. + * Should also depend on whether sdma is enabled or not, but + * that's such a rare testing case it's not worth worrying about. + */ + tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); + for (i = 0; i < tabsize; i++) + if ((i < ARRAY_SIZE(irq_table) && + irq_table[i].port <= dd->num_pports) || + (i >= ARRAY_SIZE(irq_table) && + dd->rcd[i - ARRAY_SIZE(irq_table)])) + actual_cnt++; + tabsize = actual_cnt; + dd->cspec->msix_entries = kmalloc(tabsize * + sizeof(struct msix_entry), GFP_KERNEL); + dd->cspec->msix_arg = kmalloc(tabsize * + sizeof(void *), GFP_KERNEL); + if (!dd->cspec->msix_entries || !dd->cspec->msix_arg) { + qib_dev_err(dd, "No memory for MSIx table\n"); + tabsize = 0; + } + for (i = 0; i < tabsize; i++) + dd->cspec->msix_entries[i].entry = i; + + if (qib_pcie_params(dd, 8, &tabsize, dd->cspec->msix_entries)) + qib_dev_err(dd, "Failed to setup PCIe or interrupts; " + "continuing anyway\n"); + /* may be less than we wanted, if not enough available */ + dd->cspec->num_msix_entries = tabsize; + + /* setup interrupt handler */ + qib_setup_7322_interrupt(dd, 1); + + /* clear diagctrl register, in case diags were running and crashed */ + qib_write_kreg(dd, kr_hwdiagctrl, 0); + + goto bail; + +bail_cleanup: + qib_pcie_ddcleanup(dd); +bail_free: + qib_free_devdata(dd); + dd = ERR_PTR(ret); +bail: + return dd; +} + +/* + * Set the table entry at the specified index from the table specifed. + * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first + * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. + * 'idx' below addresses the correct entry, while its 4 LSBs select the + * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. + */ +#define DDS_ENT_AMP_LSB 14 +#define DDS_ENT_MAIN_LSB 9 +#define DDS_ENT_POST_LSB 5 +#define DDS_ENT_PRE_XTRA_LSB 3 +#define DDS_ENT_PRE_LSB 0 + +/* + * Set one entry in the TxDDS table for spec'd port + * ridx picks one of the entries, while tp points + * to the appropriate table entry. + */ +static void set_txdds(struct qib_pportdata *ppd, int ridx, + const struct txdds_ent *tp) +{ + struct qib_devdata *dd = ppd->dd; + u32 pack_ent; + int regidx; + + /* Get correct offset in chip-space, and in source table */ + regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; + /* + * We do not use qib_write_kreg_port() because it was intended + * only for registers in the lower "port specific" pages. + * So do index calculation by hand. + */ + if (ppd->hw_pidx) + regidx += (dd->palign / sizeof(u64)); + + pack_ent = tp->amp << DDS_ENT_AMP_LSB; + pack_ent |= tp->main << DDS_ENT_MAIN_LSB; + pack_ent |= tp->pre << DDS_ENT_PRE_LSB; + pack_ent |= tp->post << DDS_ENT_POST_LSB; + qib_write_kreg(dd, regidx, pack_ent); + /* Prevent back-to-back writes by hitting scratch */ + qib_write_kreg(ppd->dd, kr_scratch, 0); +} + +static const struct vendor_txdds_ent vendor_txdds[] = { + { /* Amphenol 1m 30awg NoEq */ + { 0x41, 0x50, 0x48 }, "584470002 ", + { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, + }, + { /* Amphenol 3m 28awg NoEq */ + { 0x41, 0x50, 0x48 }, "584470004 ", + { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, + }, + { /* Finisar 3m OM2 Optical */ + { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", + { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, + }, + { /* Finisar 30m OM2 Optical */ + { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", + { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, + }, + { /* Finisar Default OM2 Optical */ + { 0x00, 0x90, 0x65 }, NULL, + { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, + }, + { /* Gore 1m 30awg NoEq */ + { 0x00, 0x21, 0x77 }, "QSN3300-1 ", + { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, + }, + { /* Gore 2m 30awg NoEq */ + { 0x00, 0x21, 0x77 }, "QSN3300-2 ", + { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, + }, + { /* Gore 1m 28awg NoEq */ + { 0x00, 0x21, 0x77 }, "QSN3800-1 ", + { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, + }, + { /* Gore 3m 28awg NoEq */ + { 0x00, 0x21, 0x77 }, "QSN3800-3 ", + { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, + }, + { /* Gore 5m 24awg Eq */ + { 0x00, 0x21, 0x77 }, "QSN7000-5 ", + { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, + }, + { /* Gore 7m 24awg Eq */ + { 0x00, 0x21, 0x77 }, "QSN7000-7 ", + { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, + }, + { /* Gore 5m 26awg Eq */ + { 0x00, 0x21, 0x77 }, "QSN7600-5 ", + { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, + }, + { /* Gore 7m 26awg Eq */ + { 0x00, 0x21, 0x77 }, "QSN7600-7 ", + { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, + }, + { /* Intersil 12m 24awg Active */ + { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", + { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, + }, + { /* Intersil 10m 28awg Active */ + { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", + { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, + }, + { /* Intersil 7m 30awg Active */ + { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", + { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, + }, + { /* Intersil 5m 32awg Active */ + { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", + { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, + }, + { /* Intersil Default Active */ + { 0x00, 0x30, 0xB4 }, NULL, + { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, + }, + { /* Luxtera 20m Active Optical */ + { 0x00, 0x25, 0x63 }, NULL, + { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, + }, + { /* Molex 1M Cu loopback */ + { 0x00, 0x09, 0x3A }, "74763-0025 ", + { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, + }, + { /* Molex 2m 28awg NoEq */ + { 0x00, 0x09, 0x3A }, "74757-2201 ", + { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, + }, +}; + +static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { + /* amp, pre, main, post */ + { 2, 2, 15, 6 }, /* Loopback */ + { 0, 0, 0, 1 }, /* 2 dB */ + { 0, 0, 0, 2 }, /* 3 dB */ + { 0, 0, 0, 3 }, /* 4 dB */ + { 0, 0, 0, 4 }, /* 5 dB */ + { 0, 0, 0, 5 }, /* 6 dB */ + { 0, 0, 0, 6 }, /* 7 dB */ + { 0, 0, 0, 7 }, /* 8 dB */ + { 0, 0, 0, 8 }, /* 9 dB */ + { 0, 0, 0, 9 }, /* 10 dB */ + { 0, 0, 0, 10 }, /* 11 dB */ + { 0, 0, 0, 11 }, /* 12 dB */ + { 0, 0, 0, 12 }, /* 13 dB */ + { 0, 0, 0, 13 }, /* 14 dB */ + { 0, 0, 0, 14 }, /* 15 dB */ + { 0, 0, 0, 15 }, /* 16 dB */ +}; + +static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { + /* amp, pre, main, post */ + { 2, 2, 15, 6 }, /* Loopback */ + { 0, 0, 0, 8 }, /* 2 dB */ + { 0, 0, 0, 8 }, /* 3 dB */ + { 0, 0, 0, 9 }, /* 4 dB */ + { 0, 0, 0, 9 }, /* 5 dB */ + { 0, 0, 0, 10 }, /* 6 dB */ + { 0, 0, 0, 10 }, /* 7 dB */ + { 0, 0, 0, 11 }, /* 8 dB */ + { 0, 0, 0, 11 }, /* 9 dB */ + { 0, 0, 0, 12 }, /* 10 dB */ + { 0, 0, 0, 12 }, /* 11 dB */ + { 0, 0, 0, 13 }, /* 12 dB */ + { 0, 0, 0, 13 }, /* 13 dB */ + { 0, 0, 0, 14 }, /* 14 dB */ + { 0, 0, 0, 14 }, /* 15 dB */ + { 0, 0, 0, 15 }, /* 16 dB */ +}; + +static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { + /* amp, pre, main, post */ + { 2, 2, 15, 6 }, /* Loopback */ + { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ + { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ + { 0, 1, 0, 11 }, /* 4 dB */ + { 0, 1, 0, 13 }, /* 5 dB */ + { 0, 1, 0, 15 }, /* 6 dB */ + { 0, 1, 3, 15 }, /* 7 dB */ + { 0, 1, 7, 15 }, /* 8 dB */ + { 0, 1, 7, 15 }, /* 9 dB */ + { 0, 1, 8, 15 }, /* 10 dB */ + { 0, 1, 9, 15 }, /* 11 dB */ + { 0, 1, 10, 15 }, /* 12 dB */ + { 0, 2, 6, 15 }, /* 13 dB */ + { 0, 2, 7, 15 }, /* 14 dB */ + { 0, 2, 8, 15 }, /* 15 dB */ + { 0, 2, 9, 15 }, /* 16 dB */ +}; + +/* + * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. + * These are mostly used for mez cards going through connectors + * and backplane traces, but can be used to add other "unusual" + * table values as well. + */ +static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { + /* amp, pre, main, post */ + { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ +}; + +static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { + /* amp, pre, main, post */ + { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ +}; + +static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { + /* amp, pre, main, post */ + { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ + { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ + { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ + { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ + { 0, 1, 12, 10 }, /* QME7342 backplane setting */ + { 0, 1, 12, 11 }, /* QME7342 backplane setting */ + { 0, 1, 12, 12 }, /* QME7342 backplane setting */ + { 0, 1, 12, 14 }, /* QME7342 backplane setting */ + { 0, 1, 12, 6 }, /* QME7342 backplane setting */ + { 0, 1, 12, 7 }, /* QME7342 backplane setting */ + { 0, 1, 12, 8 }, /* QME7342 backplane setting */ +}; + +static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, + unsigned atten) +{ + /* + * The attenuation table starts at 2dB for entry 1, + * with entry 0 being the loopback entry. + */ + if (atten <= 2) + atten = 1; + else if (atten > TXDDS_TABLE_SZ) + atten = TXDDS_TABLE_SZ - 1; + else + atten--; + return txdds + atten; +} + +/* + * if override is set, the module parameter txselect has a value + * for this specific port, so use it, rather than our normal mechanism. + */ +static void find_best_ent(struct qib_pportdata *ppd, + const struct txdds_ent **sdr_dds, + const struct txdds_ent **ddr_dds, + const struct txdds_ent **qdr_dds, int override) +{ + struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; + int idx; + + /* Search table of known cables */ + for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { + const struct vendor_txdds_ent *v = vendor_txdds + idx; + + if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && + (!v->partnum || + !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { + *sdr_dds = &v->sdr; + *ddr_dds = &v->ddr; + *qdr_dds = &v->qdr; + return; + } + } + + /* Lookup serdes setting by cable type and attenuation */ + if (!override && QSFP_IS_ACTIVE(qd->tech)) { + *sdr_dds = txdds_sdr + ppd->dd->board_atten; + *ddr_dds = txdds_ddr + ppd->dd->board_atten; + *qdr_dds = txdds_qdr + ppd->dd->board_atten; + return; + } + + if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || + qd->atten[1])) { + *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); + *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); + *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); + return; + } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { + /* + * If we have no (or incomplete) data from the cable + * EEPROM, or no QSFP, or override is set, use the + * module parameter value to index into the attentuation + * table. + */ + idx = ppd->cpspec->no_eep; + *sdr_dds = &txdds_sdr[idx]; + *ddr_dds = &txdds_ddr[idx]; + *qdr_dds = &txdds_qdr[idx]; + } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { + /* similar to above, but index into the "extra" table. */ + idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; + *sdr_dds = &txdds_extra_sdr[idx]; + *ddr_dds = &txdds_extra_ddr[idx]; + *qdr_dds = &txdds_extra_qdr[idx]; + } else { + /* this shouldn't happen, it's range checked */ + *sdr_dds = txdds_sdr + qib_long_atten; + *ddr_dds = txdds_ddr + qib_long_atten; + *qdr_dds = txdds_qdr + qib_long_atten; + } +} + +static void init_txdds_table(struct qib_pportdata *ppd, int override) +{ + const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; + struct txdds_ent *dds; + int idx; + int single_ent = 0; + + find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); + + /* for mez cards or override, use the selected value for all entries */ + if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) + single_ent = 1; + + /* Fill in the first entry with the best entry found. */ + set_txdds(ppd, 0, sdr_dds); + set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); + set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); + if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | + QIBL_LINKACTIVE)) { + dds = (struct txdds_ent *)(ppd->link_speed_active == + QIB_IB_QDR ? qdr_dds : + (ppd->link_speed_active == + QIB_IB_DDR ? ddr_dds : sdr_dds)); + write_tx_serdes_param(ppd, dds); + } + + /* Fill in the remaining entries with the default table values. */ + for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { + set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); + set_txdds(ppd, idx + TXDDS_TABLE_SZ, + single_ent ? ddr_dds : txdds_ddr + idx); + set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, + single_ent ? qdr_dds : txdds_qdr + idx); + } +} + +#define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) +#define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) +#define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) +#define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) +#define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) +#define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) +#define AHB_TRANS_TRIES 10 + +/* + * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, + * 5=subsystem which is why most calls have "chan + chan >> 1" + * for the channel argument. + */ +static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, + u32 data, u32 mask) +{ + u32 rd_data, wr_data, sz_mask; + u64 trans, acc, prev_acc; + u32 ret = 0xBAD0BAD; + int tries; + + prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); + /* From this point on, make sure we return access */ + acc = (quad << 1) | 1; + qib_write_kreg(dd, KR_AHB_ACC, acc); + + for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { + trans = qib_read_kreg64(dd, KR_AHB_TRANS); + if (trans & AHB_TRANS_RDY) + break; + } + if (tries >= AHB_TRANS_TRIES) { + qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); + goto bail; + } + + /* If mask is not all 1s, we need to read, but different SerDes + * entities have different sizes + */ + sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; + wr_data = data & mask & sz_mask; + if ((~mask & sz_mask) != 0) { + trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); + qib_write_kreg(dd, KR_AHB_TRANS, trans); + + for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { + trans = qib_read_kreg64(dd, KR_AHB_TRANS); + if (trans & AHB_TRANS_RDY) + break; + } + if (tries >= AHB_TRANS_TRIES) { + qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", + AHB_TRANS_TRIES); + goto bail; + } + /* Re-read in case host split reads and read data first */ + trans = qib_read_kreg64(dd, KR_AHB_TRANS); + rd_data = (uint32_t)(trans >> AHB_DATA_LSB); + wr_data |= (rd_data & ~mask & sz_mask); + } + + /* If mask is not zero, we need to write. */ + if (mask & sz_mask) { + trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); + trans |= ((uint64_t)wr_data << AHB_DATA_LSB); + trans |= AHB_WR; + qib_write_kreg(dd, KR_AHB_TRANS, trans); + + for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { + trans = qib_read_kreg64(dd, KR_AHB_TRANS); + if (trans & AHB_TRANS_RDY) + break; + } + if (tries >= AHB_TRANS_TRIES) { + qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", + AHB_TRANS_TRIES); + goto bail; + } + } + ret = wr_data; +bail: + qib_write_kreg(dd, KR_AHB_ACC, prev_acc); + return ret; +} + +static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, + unsigned mask) +{ + struct qib_devdata *dd = ppd->dd; + int chan; + u32 rbc; + + for (chan = 0; chan < SERDES_CHANS; ++chan) { + ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, + data, mask); + rbc = ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + addr, 0, 0); + } +} + +static int serdes_7322_init(struct qib_pportdata *ppd) +{ + u64 data; + u32 le_val; + + /* + * Initialize the Tx DDS tables. Also done every QSFP event, + * for adapters with QSFP + */ + init_txdds_table(ppd, 0); + + /* ensure no tx overrides from earlier driver loads */ + qib_write_kreg_port(ppd, krp_tx_deemph_override, + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + reset_tx_deemphasis_override)); + + /* Patch some SerDes defaults to "Better for IB" */ + /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ + ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); + + /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ + ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); + /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ + ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); + + /* May be overridden in qsfp_7322_event */ + le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; + ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); + + /* enable LE1 adaptation for all but QME, which is disabled */ + le_val = IS_QME(ppd->dd) ? 0 : 1; + ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); + + /* Clear cmode-override, may be set from older driver */ + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); + + /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ + ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); + + /* setup LoS params; these are subsystem, so chan == 5 */ + /* LoS filter threshold_count on, ch 0-3, set to 8 */ + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); + + /* LoS filter threshold_count off, ch 0-3, set to 4 */ + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); + + /* LoS filter select enabled */ + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); + + /* LoS target data: SDR=4, DDR=2, QDR=1 */ + ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ + ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ + ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ + + data = qib_read_kreg_port(ppd, krp_serdesctrl); + qib_write_kreg_port(ppd, krp_serdesctrl, data | + SYM_MASK(IBSerdesCtrl_0, RXLOSEN)); + + /* rxbistena; set 0 to avoid effects of it switch later */ + ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); + + /* Configure 4 DFE taps, and only they adapt */ + ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); + + /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ + le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; + ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); + + /* + * Set receive adaptation mode. SDR and DDR adaptation are + * always on, and QDR is initially enabled; later disabled. + */ + qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); + qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); + qib_write_kreg_port(ppd, krp_static_adapt_dis(2), + ppd->dd->cspec->r1 ? + QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); + ppd->cpspec->qdr_dfe_on = 1; + + /* FLoop LOS gate: PPM filter enabled */ + ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); + + /* rx offset center enabled */ + ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); + + if (!ppd->dd->cspec->r1) { + ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); + ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); + } + + /* Set the frequency loop bandwidth to 15 */ + ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); + + return 0; +} + +/* start adjust QMH serdes parameters */ + +static void set_man_code(struct qib_pportdata *ppd, int chan, int code) +{ + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 9, code << 9, 0x3f << 9); +} + +static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, + int enable, u32 tapenable) +{ + if (enable) + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 1, 3 << 10, 0x1f << 10); + else + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 1, 0, 0x1f << 10); +} + +/* Set clock to 1, 0, 1, 0 */ +static void clock_man(struct qib_pportdata *ppd, int chan) +{ + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 4, 0x4000, 0x4000); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 4, 0, 0x4000); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 4, 0x4000, 0x4000); + ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), + 4, 0, 0x4000); +} + +/* + * write the current Tx serdes pre,post,main,amp settings into the serdes. + * The caller must pass the settings appropriate for the current speed, + * or not care if they are correct for the current speed. + */ +static void write_tx_serdes_param(struct qib_pportdata *ppd, + struct txdds_ent *txdds) +{ + u64 deemph; + + deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); + /* field names for amp, main, post, pre, respectively */ + deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); + + deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + tx_override_deemphasis_select); + deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txampcntl_d2a); + deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txc0_ena); + deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcp1_ena); + deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcn1_ena); + qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); +} + +/* + * Set the parameters for mez cards on link bounce, so they are + * always exactly what was requested. Similar logic to init_txdds + * but does just the serdes. + */ +static void adj_tx_serdes(struct qib_pportdata *ppd) +{ + const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; + struct txdds_ent *dds; + + find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); + dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? + qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? + ddr_dds : sdr_dds)); + write_tx_serdes_param(ppd, dds); +} + +/* set QDR forced value for H1, if needed */ +static void force_h1(struct qib_pportdata *ppd) +{ + int chan; + + ppd->cpspec->qdr_reforce = 0; + if (!ppd->dd->cspec->r1) + return; + + for (chan = 0; chan < SERDES_CHANS; chan++) { + set_man_mode_h1(ppd, chan, 1, 0); + set_man_code(ppd, chan, ppd->cpspec->h1_val); + clock_man(ppd, chan); + set_man_mode_h1(ppd, chan, 0, 0); + } +} + +#define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) +#define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) + +#define R_OPCODE_LSB 3 +#define R_OP_NOP 0 +#define R_OP_SHIFT 2 +#define R_OP_UPDATE 3 +#define R_TDI_LSB 2 +#define R_TDO_LSB 1 +#define R_RDY 1 + +static int qib_r_grab(struct qib_devdata *dd) +{ + u64 val; + val = SJA_EN; + qib_write_kreg(dd, kr_r_access, val); + qib_read_kreg32(dd, kr_scratch); + return 0; +} + +/* qib_r_wait_for_rdy() not only waits for the ready bit, it + * returns the current state of R_TDO + */ +static int qib_r_wait_for_rdy(struct qib_devdata *dd) +{ + u64 val; + int timeout; + for (timeout = 0; timeout < 100 ; ++timeout) { + val = qib_read_kreg32(dd, kr_r_access); + if (val & R_RDY) + return (val >> R_TDO_LSB) & 1; + } + return -1; +} + +static int qib_r_shift(struct qib_devdata *dd, int bisten, + int len, u8 *inp, u8 *outp) +{ + u64 valbase, val; + int ret, pos; + + valbase = SJA_EN | (bisten << BISTEN_LSB) | + (R_OP_SHIFT << R_OPCODE_LSB); + ret = qib_r_wait_for_rdy(dd); + if (ret < 0) + goto bail; + for (pos = 0; pos < len; ++pos) { + val = valbase; + if (outp) { + outp[pos >> 3] &= ~(1 << (pos & 7)); + outp[pos >> 3] |= (ret << (pos & 7)); + } + if (inp) { + int tdi = inp[pos >> 3] >> (pos & 7); + val |= ((tdi & 1) << R_TDI_LSB); + } + qib_write_kreg(dd, kr_r_access, val); + qib_read_kreg32(dd, kr_scratch); + ret = qib_r_wait_for_rdy(dd); + if (ret < 0) + break; + } + /* Restore to NOP between operations. */ + val = SJA_EN | (bisten << BISTEN_LSB); + qib_write_kreg(dd, kr_r_access, val); + qib_read_kreg32(dd, kr_scratch); + ret = qib_r_wait_for_rdy(dd); + + if (ret >= 0) + ret = pos; +bail: + return ret; +} + +static int qib_r_update(struct qib_devdata *dd, int bisten) +{ + u64 val; + int ret; + + val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); + ret = qib_r_wait_for_rdy(dd); + if (ret >= 0) { + qib_write_kreg(dd, kr_r_access, val); + qib_read_kreg32(dd, kr_scratch); + } + return ret; +} + +#define BISTEN_PORT_SEL 15 +#define LEN_PORT_SEL 625 +#define BISTEN_AT 17 +#define LEN_AT 156 +#define BISTEN_ETM 16 +#define LEN_ETM 632 + +#define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) + +/* these are common for all IB port use cases. */ +static u8 reset_at[BIT2BYTE(LEN_AT)] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, +}; +static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, + 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, + 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, + 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, + 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, +}; +static u8 at[BIT2BYTE(LEN_AT)] = { + 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, +}; + +/* used for IB1 or IB2, only one in use */ +static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, + 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, +}; + +/* used when both IB1 and IB2 are in use */ +static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, + 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, + 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, + 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, + 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, +}; + +/* used when only IB1 is in use */ +static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { + 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, + 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, + 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, + 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +/* used when only IB2 is in use */ +static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { + 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, + 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, + 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, + 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, + 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, + 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, +}; + +/* used when both IB1 and IB2 are in use */ +static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { + 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, + 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, + 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, + 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, + 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +/* + * Do setup to properly handle IB link recovery; if port is zero, we + * are initializing to cover both ports; otherwise we are initializing + * to cover a single port card, or the port has reached INIT and we may + * need to switch coverage types. + */ +static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) +{ + u8 *portsel, *etm; + struct qib_devdata *dd = ppd->dd; + + if (!ppd->dd->cspec->r1) + return; + if (!both) { + dd->cspec->recovery_ports_initted++; + ppd->cpspec->recovery_init = 1; + } + if (!both && dd->cspec->recovery_ports_initted == 1) { + portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; + etm = atetm_1port; + } else { + portsel = portsel_2port; + etm = atetm_2port; + } + + if (qib_r_grab(dd) < 0 || + qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || + qib_r_update(dd, BISTEN_ETM) < 0 || + qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || + qib_r_update(dd, BISTEN_AT) < 0 || + qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, + portsel, NULL) < 0 || + qib_r_update(dd, BISTEN_PORT_SEL) < 0 || + qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || + qib_r_update(dd, BISTEN_AT) < 0 || + qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || + qib_r_update(dd, BISTEN_ETM) < 0) + qib_dev_err(dd, "Failed IB link recovery setup\n"); +} + +static void check_7322_rxe_status(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u64 fmask; + + if (dd->cspec->recovery_ports_initted != 1) + return; /* rest doesn't apply to dualport */ + qib_write_kreg(dd, kr_control, dd->control | + SYM_MASK(Control, FreezeMode)); + (void)qib_read_kreg64(dd, kr_scratch); + udelay(3); /* ibcreset asserted 400ns, be sure that's over */ + fmask = qib_read_kreg64(dd, kr_act_fmask); + if (!fmask) { + /* + * require a powercycle before we'll work again, and make + * sure we get no more interrupts, and don't turn off + * freeze. + */ + ppd->dd->cspec->stay_in_freeze = 1; + qib_7322_set_intr_state(ppd->dd, 0); + qib_write_kreg(dd, kr_fmask, 0ULL); + qib_dev_err(dd, "HCA unusable until powercycled\n"); + return; /* eventually reset */ + } + + qib_write_kreg(ppd->dd, kr_hwerrclear, + SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); + + /* don't do the full clear_freeze(), not needed for this */ + qib_write_kreg(dd, kr_control, dd->control); + qib_read_kreg32(dd, kr_scratch); + /* take IBC out of reset */ + if (ppd->link_speed_supported) { + ppd->cpspec->ibcctrl_a &= + ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); + qib_write_kreg_port(ppd, krp_ibcctrl_a, + ppd->cpspec->ibcctrl_a); + qib_read_kreg32(dd, kr_scratch); + if (ppd->lflags & QIBL_IB_LINK_DISABLED) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + } +} |