diff options
Diffstat (limited to 'drivers/input/keyboard/tosakbd.c')
| -rw-r--r-- | drivers/input/keyboard/tosakbd.c | 430 |
1 files changed, 0 insertions, 430 deletions
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c deleted file mode 100644 index 42cb3faf733..00000000000 --- a/drivers/input/keyboard/tosakbd.c +++ /dev/null @@ -1,430 +0,0 @@ -/* - * Keyboard driver for Sharp Tosa models (SL-6000x) - * - * Copyright (c) 2005 Dirk Opfer - * Copyright (c) 2007 Dmitry Baryshkov - * - * Based on xtkbd.c/locomkbd.c/corgikbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <mach/gpio.h> -#include <mach/tosa.h> - -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r, c) (((r)<<4) + (c) + 1) -#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1 - -#define SCAN_INTERVAL (HZ/10) - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -static unsigned short tosakbd_keycode[NR_SCANCODES] = { -0, -0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, -KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0, -KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT, -0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, -KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, -0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0, -KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, -0, 0, 0, -}; - -struct tosakbd { - unsigned short keycode[ARRAY_SIZE(tosakbd_keycode)]; - struct input_dev *input; - bool suspended; - spinlock_t lock; /* protect kbd scanning */ - struct timer_list timer; -}; - - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 12 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT) - -static inline void tosakbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT; - GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT; - GPCR2 = TOSA_GPIO_LOW_STROBE_BIT; - GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT; -} - -static inline void tosakbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT; - GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT; - GPSR2 = TOSA_GPIO_LOW_STROBE_BIT; - GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* STATE CLEAR */ - GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; -} - -static inline void tosakbd_activate_col(int col) -{ - if (col <= 5) { - /* STROBE col -> High, not col -> HiZ */ - GPSR1 = TOSA_GPIO_STROBE_BIT(col); - GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } else { - /* STROBE col -> High, not col -> HiZ */ - GPSR2 = TOSA_GPIO_STROBE_BIT(col); - GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } -} - -static inline void tosakbd_reset_col(int col) -{ - if (col <= 5) { - /* STROBE col -> Low */ - GPCR1 = TOSA_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } else { - /* STROBE col -> Low */ - GPCR2 = TOSA_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } -} -/* - * The tosa keyboard only generates interrupts when a key is pressed. - * So when a key is pressed, we enable a timer. This timer scans the - * keyboard, and this is how we detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void tosakbd_scankeyboard(struct platform_device *dev) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed = 0; - - spin_lock_irqsave(&tosakbd->lock, flags); - - if (tosakbd->suspended) - goto out; - - for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - tosakbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - tosakbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = GET_ROWS_STATUS(col); - - for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) { - unsigned int scancode, pressed; - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - if (pressed && !tosakbd->keycode[scancode]) - dev_warn(&dev->dev, - "unhandled scancode: 0x%02x\n", - scancode); - - input_report_key(tosakbd->input, - tosakbd->keycode[scancode], - pressed); - if (pressed) - num_pressed++; - } - - tosakbd_reset_col(col); - } - - tosakbd_activate_all(); - - input_sync(tosakbd->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL); - - out: - spin_unlock_irqrestore(&tosakbd->lock, flags); -} - -/* - * tosa keyboard interrupt handler. - */ -static irqreturn_t tosakbd_interrupt(int irq, void *__dev) -{ - struct platform_device *dev = __dev; - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - if (!timer_pending(&tosakbd->timer)) { - /** wait chattering delay **/ - udelay(20); - tosakbd_scankeyboard(dev); - } - - return IRQ_HANDLED; -} - -/* - * tosa timer checking for released keys - */ -static void tosakbd_timer_callback(unsigned long __dev) -{ - struct platform_device *dev = (struct platform_device *)__dev; - - tosakbd_scankeyboard(dev); -} - -#ifdef CONFIG_PM -static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - unsigned long flags; - - spin_lock_irqsave(&tosakbd->lock, flags); - tosakbd->suspended = true; - spin_unlock_irqrestore(&tosakbd->lock, flags); - - del_timer_sync(&tosakbd->timer); - - return 0; -} - -static int tosakbd_resume(struct platform_device *dev) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - tosakbd->suspended = false; - tosakbd_scankeyboard(dev); - - return 0; -} -#else -#define tosakbd_suspend NULL -#define tosakbd_resume NULL -#endif - -static int __devinit tosakbd_probe(struct platform_device *pdev) { - - int i; - struct tosakbd *tosakbd; - struct input_dev *input_dev; - int error; - - tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL); - if (!tosakbd) - return -ENOMEM; - - input_dev = input_allocate_device(); - if (!input_dev) { - kfree(tosakbd); - return -ENOMEM; - } - - platform_set_drvdata(pdev, tosakbd); - - spin_lock_init(&tosakbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&tosakbd->timer); - tosakbd->timer.function = tosakbd_timer_callback; - tosakbd->timer.data = (unsigned long) pdev; - - tosakbd->input = input_dev; - - input_set_drvdata(input_dev, tosakbd); - input_dev->name = "Tosa Keyboard"; - input_dev->phys = "tosakbd/input0"; - input_dev->dev.parent = &pdev->dev; - - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - input_dev->keycode = tosakbd->keycode; - input_dev->keycodesize = sizeof(tosakbd->keycode[0]); - input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); - - memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); - - for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) - __set_bit(tosakbd->keycode[i], input_dev->keybit); - __clear_bit(KEY_RESERVED, input_dev->keybit); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { - int gpio = TOSA_GPIO_KEY_SENSE(i); - int irq; - error = gpio_request(gpio, "tosakbd"); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to request GPIO %d, " - " error %d\n", gpio, error); - goto fail; - } - - error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i)); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to configure input" - " direction for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail; - } - - irq = gpio_to_irq(gpio); - if (irq < 0) { - error = irq; - printk(KERN_ERR "gpio-keys: Unable to get irq number" - " for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail; - } - - error = request_irq(irq, tosakbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "tosakbd", pdev); - - if (error) { - printk("tosakbd: Can't get IRQ: %d: error %d!\n", - irq, error); - gpio_free(gpio); - goto fail; - } - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) { - int gpio = TOSA_GPIO_KEY_STROBE(i); - error = gpio_request(gpio, "tosakbd"); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to request GPIO %d, " - " error %d\n", gpio, error); - goto fail2; - } - - error = gpio_direction_output(gpio, 1); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to configure input" - " direction for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail2; - } - - } - - error = input_register_device(input_dev); - if (error) { - printk(KERN_ERR "tosakbd: Unable to register input device, " - "error: %d\n", error); - goto fail2; - } - - printk(KERN_INFO "input: Tosa Keyboard Registered\n"); - - return 0; - -fail2: - while (--i >= 0) - gpio_free(TOSA_GPIO_KEY_STROBE(i)); - - i = TOSA_KEY_SENSE_NUM; -fail: - while (--i >= 0) { - free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev); - gpio_free(TOSA_GPIO_KEY_SENSE(i)); - } - - platform_set_drvdata(pdev, NULL); - input_free_device(input_dev); - kfree(tosakbd); - - return error; -} - -static int __devexit tosakbd_remove(struct platform_device *dev) -{ - int i; - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) - gpio_free(TOSA_GPIO_KEY_STROBE(i)); - - for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { - free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev); - gpio_free(TOSA_GPIO_KEY_SENSE(i)); - } - - del_timer_sync(&tosakbd->timer); - - input_unregister_device(tosakbd->input); - - kfree(tosakbd); - - return 0; -} - -static struct platform_driver tosakbd_driver = { - .probe = tosakbd_probe, - .remove = __devexit_p(tosakbd_remove), - .suspend = tosakbd_suspend, - .resume = tosakbd_resume, - .driver = { - .name = "tosa-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __devinit tosakbd_init(void) -{ - return platform_driver_register(&tosakbd_driver); -} - -static void __exit tosakbd_exit(void) -{ - platform_driver_unregister(&tosakbd_driver); -} - -module_init(tosakbd_init); -module_exit(tosakbd_exit); - -MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>"); -MODULE_DESCRIPTION("Tosa Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:tosa-keyboard"); |