summaryrefslogtreecommitdiffstats
path: root/drivers/input/keyboard
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/keyboard')
-rw-r--r--drivers/input/keyboard/Kconfig10
-rw-r--r--drivers/input/keyboard/Makefile1
-rw-r--r--drivers/input/keyboard/stmpe-keypad.c386
3 files changed, 397 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b171f63fe4d..9cc488d2149 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -395,6 +395,16 @@ config KEYBOARD_SH_KEYSC
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
+config KEYBOARD_STMPE
+ tristate "STMPE keypad support"
+ depends on MFD_STMPE
+ help
+ Say Y here if you want to use the keypad controller on STMPE I/O
+ expanders.
+
+ To compile this driver as a module, choose M here: the module will be
+ called stmpe-keypad.
+
config KEYBOARD_DAVINCI
tristate "TI DaVinci Key Scan"
depends on ARCH_DAVINCI_DM365
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 1a66d5f1ca8..504b591be0c 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
+obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
new file mode 100644
index 00000000000..ab7610ca10e
--- /dev/null
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -0,0 +1,386 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL 0x60
+#define STMPE_KPC_ROW_MSB 0x61
+#define STMPE_KPC_ROW_LSB 0x62
+#define STMPE_KPC_CTRL_MSB 0x63
+#define STMPE_KPC_CTRL_LSB 0x64
+#define STMPE_KPC_COMBI_KEY_0 0x65
+#define STMPE_KPC_COMBI_KEY_1 0x66
+#define STMPE_KPC_COMBI_KEY_2 0x67
+#define STMPE_KPC_DATA_BYTE0 0x68
+#define STMPE_KPC_DATA_BYTE1 0x69
+#define STMPE_KPC_DATA_BYTE2 0x6a
+#define STMPE_KPC_DATA_BYTE3 0x6b
+#define STMPE_KPC_DATA_BYTE4 0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS 0xff
+
+#define STMPE_KPC_DATA_UP (0x1 << 7)
+#define STMPE_KPC_DATA_ROW (0xf << 3)
+#define STMPE_KPC_DATA_COL (0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK 0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE 127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT 15
+
+#define STMPE_KEYPAD_MAX_ROWS 8
+#define STMPE_KEYPAD_MAX_COLS 8
+#define STMPE_KEYPAD_ROW_SHIFT 3
+#define STMPE_KEYPAD_KEYMAP_SIZE \
+ (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ * auto-increments on multiple read
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+ bool auto_increment;
+ int num_data;
+ int num_normal_data;
+ int max_cols;
+ int max_rows;
+ unsigned int col_gpios;
+ unsigned int row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+ [STMPE1601] = {
+ .auto_increment = true,
+ .num_data = 5,
+ .num_normal_data = 3,
+ .max_cols = 8,
+ .max_rows = 8,
+ .col_gpios = 0x000ff, /* GPIO 0 - 7 */
+ .row_gpios = 0x0ff00, /* GPIO 8 - 15 */
+ },
+ [STMPE2401] = {
+ .auto_increment = false,
+ .num_data = 3,
+ .num_normal_data = 2,
+ .max_cols = 8,
+ .max_rows = 12,
+ .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
+ .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ },
+ [STMPE2403] = {
+ .auto_increment = true,
+ .num_data = 5,
+ .num_normal_data = 3,
+ .max_cols = 8,
+ .max_rows = 12,
+ .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
+ .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ },
+};
+
+struct stmpe_keypad {
+ struct stmpe *stmpe;
+ struct input_dev *input;
+ const struct stmpe_keypad_variant *variant;
+ const struct stmpe_keypad_platform_data *plat;
+
+ unsigned int rows;
+ unsigned int cols;
+
+ unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ struct stmpe *stmpe = keypad->stmpe;
+ int ret;
+ int i;
+
+ if (variant->auto_increment)
+ return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+ variant->num_data, data);
+
+ for (i = 0; i < variant->num_data; i++) {
+ ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+ if (ret < 0)
+ return ret;
+
+ data[i] = ret;
+ }
+
+ return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+ struct stmpe_keypad *keypad = dev;
+ struct input_dev *input = keypad->input;
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ u8 fifo[variant->num_data];
+ int ret;
+ int i;
+
+ ret = stmpe_keypad_read_data(keypad, fifo);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < variant->num_normal_data; i++) {
+ u8 data = fifo[i];
+ int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+ int col = data & STMPE_KPC_DATA_COL;
+ int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+ bool up = data & STMPE_KPC_DATA_UP;
+
+ if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+ == STMPE_KPC_DATA_NOKEY_MASK)
+ continue;
+
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, keypad->keymap[code], !up);
+ input_sync(input);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ unsigned int col_gpios = variant->col_gpios;
+ unsigned int row_gpios = variant->row_gpios;
+ struct stmpe *stmpe = keypad->stmpe;
+ unsigned int pins = 0;
+ int i;
+
+ /*
+ * Figure out which pins need to be set to the keypad alternate
+ * function.
+ *
+ * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+ * for the keypad.
+ *
+ * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+ * for the keypad) are used on the board.
+ */
+
+ for (i = 0; i < variant->max_cols; i++) {
+ int num = __ffs(col_gpios);
+
+ if (keypad->cols & (1 << i))
+ pins |= 1 << num;
+
+ col_gpios &= ~(1 << num);
+ }
+
+ for (i = 0; i < variant->max_rows; i++) {
+ int num = __ffs(row_gpios);
+
+ if (keypad->rows & (1 << i))
+ pins |= 1 << num;
+
+ row_gpios &= ~(1 << num);
+ }
+
+ return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+}
+
+static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+ const struct stmpe_keypad_platform_data *plat = keypad->plat;
+ const struct stmpe_keypad_variant *variant = keypad->variant;
+ struct stmpe *stmpe = keypad->stmpe;
+ int ret;
+
+ if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+ return -EINVAL;
+
+ if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+ return -EINVAL;
+
+ ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_keypad_altfunc_init(keypad);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+ if (ret < 0)
+ return ret;
+
+ ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+ if (ret < 0)
+ return ret;
+
+ if (variant->max_rows > 8) {
+ ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+ STMPE_KPC_ROW_MSB_ROWS,
+ keypad->rows >> 8);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+ STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+ plat->scan_count << 4);
+ if (ret < 0)
+ return ret;
+
+ return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+ STMPE_KPC_CTRL_LSB_SCAN |
+ STMPE_KPC_CTRL_LSB_DEBOUNCE,
+ STMPE_KPC_CTRL_LSB_SCAN |
+ (plat->debounce_ms << 1));
+}
+
+static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct stmpe_keypad_platform_data *plat;
+ struct stmpe_keypad *keypad;
+ struct input_dev *input;
+ int ret;
+ int irq;
+ int i;
+
+ plat = stmpe->pdata->keypad;
+ if (!plat)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL);
+ if (!keypad)
+ return -ENOMEM;
+
+ input = input_allocate_device();
+ if (!input) {
+ ret = -ENOMEM;
+ goto out_freekeypad;
+ }
+
+ input->name = "STMPE keypad";
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &pdev->dev;
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ __set_bit(EV_KEY, input->evbit);
+ if (!plat->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ input->keycode = keypad->keymap;
+ input->keycodesize = sizeof(keypad->keymap[0]);
+ input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+ matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
+ input->keycode, input->keybit);
+
+ for (i = 0; i < plat->keymap_data->keymap_size; i++) {
+ unsigned int key = plat->keymap_data->keymap[i];
+
+ keypad->cols |= 1 << KEY_COL(key);
+ keypad->rows |= 1 << KEY_ROW(key);
+ }
+
+ keypad->stmpe = stmpe;
+ keypad->plat = plat;
+ keypad->input = input;
+ keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+ ret = stmpe_keypad_chip_init(keypad);
+ if (ret < 0)
+ goto out_freeinput;
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "unable to register input device: %d\n", ret);
+ goto out_freeinput;
+ }
+
+ ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT,
+ "stmpe-keypad", keypad);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+ goto out_unregisterinput;
+ }
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+out_unregisterinput:
+ input_unregister_device(input);
+ input = NULL;
+out_freeinput:
+ input_free_device(input);
+out_freekeypad:
+ kfree(keypad);
+ return ret;
+}
+
+static int __devexit stmpe_keypad_remove(struct platform_device *pdev)
+{
+ struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+ struct stmpe *stmpe = keypad->stmpe;
+ int irq = platform_get_irq(pdev, 0);
+
+ stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD);
+
+ free_irq(irq, keypad);
+ input_unregister_device(keypad->input);
+ platform_set_drvdata(pdev, NULL);
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+ .driver.name = "stmpe-keypad",
+ .driver.owner = THIS_MODULE,
+ .probe = stmpe_keypad_probe,
+ .remove = __devexit_p(stmpe_keypad_remove),
+};
+
+static int __init stmpe_keypad_init(void)
+{
+ return platform_driver_register(&stmpe_keypad_driver);
+}
+module_init(stmpe_keypad_init);
+
+static void __exit stmpe_keypad_exit(void)
+{
+ platform_driver_unregister(&stmpe_keypad_driver);
+}
+module_exit(stmpe_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 11:18:29 +0000