summaryrefslogtreecommitdiffstats
path: root/drivers/input/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/misc')
-rw-r--r--drivers/input/misc/Kconfig9
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/ad714x.c5
-rw-r--r--drivers/input/misc/adxl34x.c3
-rw-r--r--drivers/input/misc/atlas_btns.c1
-rw-r--r--drivers/input/misc/bfin_rotary.c3
-rw-r--r--drivers/input/misc/bma150.c3
-rw-r--r--drivers/input/misc/cma3000_d0x.c2
-rw-r--r--drivers/input/misc/cobalt_btns.c1
-rw-r--r--drivers/input/misc/da9052_onkey.c1
-rw-r--r--drivers/input/misc/da9055_onkey.c1
-rw-r--r--drivers/input/misc/dm355evm_keys.c1
-rw-r--r--drivers/input/misc/gp2ap002a00f.c2
-rw-r--r--drivers/input/misc/gpio-beeper.c127
-rw-r--r--drivers/input/misc/gpio_tilt_polled.c4
-rw-r--r--drivers/input/misc/keyspan_remote.c1
-rw-r--r--drivers/input/misc/kxtj9.c3
-rw-r--r--drivers/input/misc/max8997_haptic.c1
-rw-r--r--drivers/input/misc/mc13783-pwrbutton.c1
-rw-r--r--drivers/input/misc/mpu3050.c1
-rw-r--r--drivers/input/misc/pcap_keys.c1
-rw-r--r--drivers/input/misc/pcf50633-input.c1
-rw-r--r--drivers/input/misc/pcf8574_keypad.c1
-rw-r--r--drivers/input/misc/pcspkr.c1
-rw-r--r--drivers/input/misc/pm8xxx-vibrator.c107
-rw-r--r--drivers/input/misc/pmic8xxx-pwrkey.c106
-rw-r--r--drivers/input/misc/powermate.c1
-rw-r--r--drivers/input/misc/pwm-beeper.c2
-rw-r--r--drivers/input/misc/retu-pwrbutton.c1
-rw-r--r--drivers/input/misc/rotary_encoder.c1
-rw-r--r--drivers/input/misc/sgi_btns.c1
-rw-r--r--drivers/input/misc/sirfsoc-onkey.c1
-rw-r--r--drivers/input/misc/twl4030-pwrbutton.c46
-rw-r--r--drivers/input/misc/twl4030-vibra.c6
-rw-r--r--drivers/input/misc/twl6040-vibra.c8
-rw-r--r--drivers/input/misc/wm831x-on.c1
-rw-r--r--drivers/input/misc/yealink.c1
37 files changed, 247 insertions, 210 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5f4967d01bc..4ffc3973251 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -222,6 +222,15 @@ config INPUT_GP2A
To compile this driver as a module, choose M here: the
module will be called gp2ap002a00f.
+config INPUT_GPIO_BEEPER
+ tristate "Generic GPIO Beeper support"
+ depends on OF_GPIO
+ help
+ Say Y here if you have a beeper connected to a GPIO pin.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio-beeper.
+
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
depends on GPIOLIB
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0ebfb6dbf0f..cda71fc52fb 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
+obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 2e5d5e1de64..7a61e9ee682 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -7,7 +7,6 @@
*/
#include <linux/device.h>
-#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
@@ -969,7 +968,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
int error;
struct input_dev *input[MAX_DEVICE_NUM];
- struct ad714x_platform_data *plat_data = dev->platform_data;
+ struct ad714x_platform_data *plat_data = dev_get_platdata(dev);
struct ad714x_chip *ad714x;
void *drv_mem;
unsigned long irqflags;
@@ -986,7 +985,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
goto err_out;
}
- if (dev->platform_data == NULL) {
+ if (dev_get_platdata(dev) == NULL) {
dev_err(dev, "platform data for ad714x doesn't exist\n");
error = -EINVAL;
goto err_out;
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index 1cb1da29441..2b2d02f408b 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -8,7 +8,6 @@
*/
#include <linux/device.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/interrupt.h>
@@ -714,7 +713,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
ac->fifo_delay = fifo_delay_default;
- pdata = dev->platform_data;
+ pdata = dev_get_platdata(dev);
if (!pdata) {
dev_dbg(dev,
"No platform data: Using default initialization\n");
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index 5d4402365a5..c0c5b63af90 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/input.h>
#include <linux/types.h>
#include <asm/uaccess.h>
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index cd139cb17e3..e69d9bcb37e 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -6,7 +6,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pm.h>
@@ -92,7 +91,7 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
static int bfin_rotary_probe(struct platform_device *pdev)
{
- struct bfin_rotary_platform_data *pdata = pdev->dev.platform_data;
+ struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct bfin_rot *rotary;
struct input_dev *input;
int error;
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
index 865c2f9d25b..52d3a9b28f0 100644
--- a/drivers/input/misc/bma150.c
+++ b/drivers/input/misc/bma150.c
@@ -526,7 +526,8 @@ static int bma150_register_polled_device(struct bma150_data *bma150)
static int bma150_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct bma150_platform_data *pdata = client->dev.platform_data;
+ const struct bma150_platform_data *pdata =
+ dev_get_platdata(&client->dev);
const struct bma150_cfg *cfg;
struct bma150_data *bma150;
int chip_id;
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index df9b756594f..c7d00748277 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -284,7 +284,7 @@ EXPORT_SYMBOL(cma3000_resume);
struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
const struct cma3000_bus_ops *bops)
{
- const struct cma3000_platform_data *pdata = dev->platform_data;
+ const struct cma3000_platform_data *pdata = dev_get_platdata(dev);
struct cma3000_accl_data *data;
struct input_dev *input_dev;
int rev;
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index b5d71d24585..3e11510ff82 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -17,7 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/init.h>
#include <linux/input-polldev.h>
#include <linux/ioport.h>
#include <linux/module.h>
diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c
index 020569a499f..1f695f229ea 100644
--- a/drivers/input/misc/da9052_onkey.c
+++ b/drivers/input/misc/da9052_onkey.c
@@ -11,7 +11,6 @@
* option) any later version.
*/
-#include <linux/init.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c
index a0af8b2506c..4b11ede3495 100644
--- a/drivers/input/misc/da9055_onkey.c
+++ b/drivers/input/misc/da9055_onkey.c
@@ -11,7 +11,6 @@
* option) any later version.
*/
-#include <linux/init.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index a309a5c0899..0eba94f581d 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -9,7 +9,6 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
index fe30bd0fe4b..de21e317da3 100644
--- a/drivers/input/misc/gp2ap002a00f.c
+++ b/drivers/input/misc/gp2ap002a00f.c
@@ -125,7 +125,7 @@ static int gp2a_initialize(struct gp2a_data *dt)
static int gp2a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct gp2a_platform_data *pdata = client->dev.platform_data;
+ const struct gp2a_platform_data *pdata = dev_get_platdata(&client->dev);
struct gp2a_data *dt;
int error;
diff --git a/drivers/input/misc/gpio-beeper.c b/drivers/input/misc/gpio-beeper.c
new file mode 100644
index 00000000000..b757435e2b3
--- /dev/null
+++ b/drivers/input/misc/gpio-beeper.c
@@ -0,0 +1,127 @@
+/*
+ * Generic GPIO beeper driver
+ *
+ * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#define BEEPER_MODNAME "gpio-beeper"
+
+struct gpio_beeper {
+ struct work_struct work;
+ int gpio;
+ bool active_low;
+ bool beeping;
+};
+
+static void gpio_beeper_toggle(struct gpio_beeper *beep, bool on)
+{
+ gpio_set_value_cansleep(beep->gpio, on ^ beep->active_low);
+}
+
+static void gpio_beeper_work(struct work_struct *work)
+{
+ struct gpio_beeper *beep = container_of(work, struct gpio_beeper, work);
+
+ gpio_beeper_toggle(beep, beep->beeping);
+}
+
+static int gpio_beeper_event(struct input_dev *dev, unsigned int type,
+ unsigned int code, int value)
+{
+ struct gpio_beeper *beep = input_get_drvdata(dev);
+
+ if (type != EV_SND || code != SND_BELL)
+ return -ENOTSUPP;
+
+ if (value < 0)
+ return -EINVAL;
+
+ beep->beeping = value;
+ /* Schedule work to actually turn the beeper on or off */
+ schedule_work(&beep->work);
+
+ return 0;
+}
+
+static void gpio_beeper_close(struct input_dev *input)
+{
+ struct gpio_beeper *beep = input_get_drvdata(input);
+
+ cancel_work_sync(&beep->work);
+ gpio_beeper_toggle(beep, false);
+}
+
+static int gpio_beeper_probe(struct platform_device *pdev)
+{
+ struct gpio_beeper *beep;
+ enum of_gpio_flags flags;
+ struct input_dev *input;
+ unsigned long gflags;
+ int err;
+
+ beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL);
+ if (!beep)
+ return -ENOMEM;
+
+ beep->gpio = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
+ if (!gpio_is_valid(beep->gpio))
+ return beep->gpio;
+
+ input = devm_input_allocate_device(&pdev->dev);
+ if (!input)
+ return -ENOMEM;
+
+ INIT_WORK(&beep->work, gpio_beeper_work);
+
+ input->name = pdev->name;
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+ input->close = gpio_beeper_close;
+ input->event = gpio_beeper_event;
+
+ input_set_capability(input, EV_SND, SND_BELL);
+
+ beep->active_low = flags & OF_GPIO_ACTIVE_LOW;
+ gflags = beep->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+
+ err = devm_gpio_request_one(&pdev->dev, beep->gpio, gflags, pdev->name);
+ if (err)
+ return err;
+
+ input_set_drvdata(input, beep);
+
+ return input_register_device(input);
+}
+
+static struct of_device_id gpio_beeper_of_match[] = {
+ { .compatible = BEEPER_MODNAME, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpio_beeper_of_match);
+
+static struct platform_driver gpio_beeper_platform_driver = {
+ .driver = {
+ .name = BEEPER_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = gpio_beeper_of_match,
+ },
+ .probe = gpio_beeper_probe,
+};
+module_platform_driver(gpio_beeper_platform_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Generic GPIO beeper driver");
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
index 714c6836913..1a81d911522 100644
--- a/drivers/input/misc/gpio_tilt_polled.c
+++ b/drivers/input/misc/gpio_tilt_polled.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
@@ -98,7 +97,8 @@ static void gpio_tilt_polled_close(struct input_polled_dev *dev)
static int gpio_tilt_polled_probe(struct platform_device *pdev)
{
- const struct gpio_tilt_platform_data *pdata = pdev->dev.platform_data;
+ const struct gpio_tilt_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
struct gpio_tilt_polled_dev *tdev;
struct input_polled_dev *poll_dev;
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 290fa5f97de..01f3b5b300f 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb/input.h>
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
index a993b67a8a5..d708478bc5b 100644
--- a/drivers/input/misc/kxtj9.c
+++ b/drivers/input/misc/kxtj9.c
@@ -509,7 +509,8 @@ out:
static int kxtj9_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct kxtj9_platform_data *pdata = client->dev.platform_data;
+ const struct kxtj9_platform_data *pdata =
+ dev_get_platdata(&client->dev);
struct kxtj9_data *tj9;
int err;
diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c
index e973133212a..1fea5484941 100644
--- a/drivers/input/misc/max8997_haptic.c
+++ b/drivers/input/misc/max8997_haptic.c
@@ -23,7 +23,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/err.h>
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
index d0277a7b157..0df6e8d8bd0 100644
--- a/drivers/input/misc/mc13783-pwrbutton.c
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/input.h>
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index 6983ffbbfb9..5e5051351c3 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -30,7 +30,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c
index 40ac9a5adf8..cd230365166 100644
--- a/drivers/input/misc/pcap_keys.c
+++ b/drivers/input/misc/pcap_keys.c
@@ -12,7 +12,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/input.h>
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 73b13ebabe5..db92f4f3c99 100644
--- a/drivers/input/misc/pcf50633-input.c
+++ b/drivers/input/misc/pcf50633-input.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/input.h>
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 0deca5a3c87..97f711a7bd2 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 7288b267613..674a2cfc3c0 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i8253.h>
-#include <linux/init.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/timex.h>
diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index ec086f6f3cc..b88b7cbf93e 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -11,13 +11,12 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/slab.h>
-#include <linux/mfd/pm8xxx/core.h>
+#include <linux/regmap.h>
#define VIB_DRV 0x4A
@@ -35,7 +34,7 @@
* struct pm8xxx_vib - structure to hold vibrator data
* @vib_input_dev: input device supporting force feedback
* @work: work structure to set the vibration parameters
- * @dev: device supporting force feedback
+ * @regmap: regmap for register read/write
* @speed: speed of vibration set from userland
* @active: state of vibrator
* @level: level of vibration to set in the chip
@@ -44,7 +43,7 @@
struct pm8xxx_vib {
struct input_dev *vib_input_dev;
struct work_struct work;
- struct device *dev;
+ struct regmap *regmap;
int speed;
int level;
bool active;
@@ -52,42 +51,6 @@ struct pm8xxx_vib {
};
/**
- * pm8xxx_vib_read_u8 - helper to read a byte from pmic chip
- * @vib: pointer to vibrator structure
- * @data: placeholder for data to be read
- * @reg: register address
- */
-static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib,
- u8 *data, u16 reg)
-{
- int rc;
-
- rc = pm8xxx_readb(vib->dev->parent, reg, data);
- if (rc < 0)
- dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n",
- reg, rc);
- return rc;
-}
-
-/**
- * pm8xxx_vib_write_u8 - helper to write a byte to pmic chip
- * @vib: pointer to vibrator structure
- * @data: data to write
- * @reg: register address
- */
-static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
- u8 data, u16 reg)
-{
- int rc;
-
- rc = pm8xxx_writeb(vib->dev->parent, reg, data);
- if (rc < 0)
- dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n",
- reg, rc);
- return rc;
-}
-
-/**
* pm8xxx_vib_set - handler to start/stop vibration
* @vib: pointer to vibrator structure
* @on: state to set
@@ -95,14 +58,14 @@ static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib,
static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
{
int rc;
- u8 val = vib->reg_vib_drv;
+ unsigned int val = vib->reg_vib_drv;
if (on)
val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
else
val &= ~VIB_DRV_SEL_MASK;
- rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
+ rc = regmap_write(vib->regmap, VIB_DRV, val);
if (rc < 0)
return rc;
@@ -118,9 +81,9 @@ static void pm8xxx_work_handler(struct work_struct *work)
{
struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
int rc;
- u8 val;
+ unsigned int val;
- rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
+ rc = regmap_read(vib->regmap, VIB_DRV, &val);
if (rc < 0)
return;
@@ -184,34 +147,37 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
struct pm8xxx_vib *vib;
struct input_dev *input_dev;
int error;
- u8 val;
-
- vib = kzalloc(sizeof(*vib), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!vib || !input_dev) {
- dev_err(&pdev->dev, "couldn't allocate memory\n");
- error = -ENOMEM;
- goto err_free_mem;
- }
+ unsigned int val;
+
+ vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
+ if (!vib)
+ return -ENOMEM;
+
+ vib->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!vib->regmap)
+ return -ENODEV;
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev)
+ return -ENOMEM;
INIT_WORK(&vib->work, pm8xxx_work_handler);
- vib->dev = &pdev->dev;
vib->vib_input_dev = input_dev;
/* operate in manual mode */
- error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV);
+ error = regmap_read(vib->regmap, VIB_DRV, &val);
if (error < 0)
- goto err_free_mem;
+ return error;
+
val &= ~VIB_DRV_EN_MANUAL_MASK;
- error = pm8xxx_vib_write_u8(vib, val, VIB_DRV);
+ error = regmap_write(vib->regmap, VIB_DRV, val);
if (error < 0)
- goto err_free_mem;
+ return error;
vib->reg_vib_drv = val;
input_dev->name = "pm8xxx_vib_ffmemless";
input_dev->id.version = 1;
- input_dev->dev.parent = &pdev->dev;
input_dev->close = pm8xxx_vib_close;
input_set_drvdata(input_dev, vib);
input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE);
@@ -221,35 +187,17 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
if (error) {
dev_err(&pdev->dev,
"couldn't register vibrator as FF device\n");
- goto err_free_mem;
+ return error;
}
error = input_register_device(input_dev);
if (error) {
dev_err(&pdev->dev, "couldn't register input device\n");
- goto err_destroy_memless;
+ return error;
}
platform_set_drvdata(pdev, vib);
return 0;
-
-err_destroy_memless:
- input_ff_destroy(input_dev);
-err_free_mem:
- input_free_device(input_dev);
- kfree(vib);
-
- return error;
-}
-
-static int pm8xxx_vib_remove(struct platform_device *pdev)
-{
- struct pm8xxx_vib *vib = platform_get_drvdata(pdev);
-
- input_unregister_device(vib->vib_input_dev);
- kfree(vib);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
@@ -268,7 +216,6 @@ static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
static struct platform_driver pm8xxx_vib_driver = {
.probe = pm8xxx_vib_probe,
- .remove = pm8xxx_vib_remove,
.driver = {
.name = "pm8xxx-vib",
.owner = THIS_MODULE,
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index b49b738aa9c..0e1a05f9585 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -11,16 +11,15 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/log2.h>
-#include <linux/mfd/pm8xxx/core.h>
#include <linux/input/pmic8xxx-pwrkey.h>
#define PON_CNTL_1 0x1C
@@ -32,26 +31,25 @@
* @key_press_irq: key press irq number
*/
struct pmic8xxx_pwrkey {
- struct input_dev *pwr;
int key_press_irq;
};
-static irqreturn_t pwrkey_press_irq(int irq, void *_pwrkey)
+static irqreturn_t pwrkey_press_irq(int irq, void *_pwr)
{
- struct pmic8xxx_pwrkey *pwrkey = _pwrkey;
+ struct input_dev *pwr = _pwr;
- input_report_key(pwrkey->pwr, KEY_POWER, 1);
- input_sync(pwrkey->pwr);
+ input_report_key(pwr, KEY_POWER, 1);
+ input_sync(pwr);
return IRQ_HANDLED;
}
-static irqreturn_t pwrkey_release_irq(int irq, void *_pwrkey)
+static irqreturn_t pwrkey_release_irq(int irq, void *_pwr)
{
- struct pmic8xxx_pwrkey *pwrkey = _pwrkey;
+ struct input_dev *pwr = _pwr;
- input_report_key(pwrkey->pwr, KEY_POWER, 0);
- input_sync(pwrkey->pwr);
+ input_report_key(pwr, KEY_POWER, 0);
+ input_sync(pwr);
return IRQ_HANDLED;
}
@@ -88,7 +86,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
int key_press_irq = platform_get_irq(pdev, 1);
int err;
unsigned int delay;
- u8 pon_cntl;
+ unsigned int pon_cntl;
+ struct regmap *regmap;
struct pmic8xxx_pwrkey *pwrkey;
const struct pm8xxx_pwrkey_platform_data *pdata =
dev_get_platdata(&pdev->dev);
@@ -103,30 +102,36 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
return -EINVAL;
}
- pwrkey = kzalloc(sizeof(*pwrkey), GFP_KERNEL);
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
+ dev_err(&pdev->dev, "failed to locate regmap for the device\n");
+ return -ENODEV;
+ }
+
+ pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
if (!pwrkey)
return -ENOMEM;
- pwr = input_allocate_device();
+ pwrkey->key_press_irq = key_press_irq;
+
+ pwr = devm_input_allocate_device(&pdev->dev);
if (!pwr) {
dev_dbg(&pdev->dev, "Can't allocate power button\n");
- err = -ENOMEM;
- goto free_pwrkey;
+ return -ENOMEM;
}
input_set_capability(pwr, EV_KEY, KEY_POWER);
pwr->name = "pmic8xxx_pwrkey";
pwr->phys = "pmic8xxx_pwrkey/input0";
- pwr->dev.parent = &pdev->dev;
delay = (pdata->kpd_trigger_delay_us << 10) / USEC_PER_SEC;
delay = 1 + ilog2(delay);
- err = pm8xxx_readb(pdev->dev.parent, PON_CNTL_1, &pon_cntl);
+ err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
if (err < 0) {
dev_err(&pdev->dev, "failed reading PON_CNTL_1 err=%d\n", err);
- goto free_input_dev;
+ return err;
}
pon_cntl &= ~PON_CNTL_TRIG_DELAY_MASK;
@@ -136,69 +141,46 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
else
pon_cntl &= ~PON_CNTL_PULL_UP;
- err = pm8xxx_writeb(pdev->dev.parent, PON_CNTL_1, pon_cntl);
+ err = regmap_write(regmap, PON_CNTL_1, pon_cntl);
if (err < 0) {
dev_err(&pdev->dev, "failed writing PON_CNTL_1 err=%d\n", err);
- goto free_input_dev;
+ return err;
}
- err = input_register_device(pwr);
+ err = devm_request_irq(&pdev->dev, key_press_irq, pwrkey_press_irq,
+ IRQF_TRIGGER_RISING,
+ "pmic8xxx_pwrkey_press", pwr);
if (err) {
- dev_dbg(&pdev->dev, "Can't register power key: %d\n", err);
- goto free_input_dev;
+ dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
+ key_press_irq, err);
+ return err;
}
- pwrkey->key_press_irq = key_press_irq;
- pwrkey->pwr = pwr;
-
- platform_set_drvdata(pdev, pwrkey);
-
- err = request_irq(key_press_irq, pwrkey_press_irq,
- IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_press", pwrkey);
- if (err < 0) {
- dev_dbg(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
- key_press_irq, err);
- goto unreg_input_dev;
+ err = devm_request_irq(&pdev->dev, key_release_irq, pwrkey_release_irq,
+ IRQF_TRIGGER_RISING,
+ "pmic8xxx_pwrkey_release", pwr);
+ if (err) {
+ dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
+ key_release_irq, err);
+ return err;
}
- err = request_irq(key_release_irq, pwrkey_release_irq,
- IRQF_TRIGGER_RISING, "pmic8xxx_pwrkey_release", pwrkey);
- if (err < 0) {
- dev_dbg(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n",
- key_release_irq, err);
-
- goto free_press_irq;
+ err = input_register_device(pwr);
+ if (err) {
+ dev_err(&pdev->dev, "Can't register power key: %d\n", err);
+ return err;
}
+ platform_set_drvdata(pdev, pwrkey);
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
-
-free_press_irq:
- free_irq(key_press_irq, pwrkey);
-unreg_input_dev:
- input_unregister_device(pwr);
- pwr = NULL;
-free_input_dev:
- input_free_device(pwr);
-free_pwrkey:
- kfree(pwrkey);
- return err;
}
static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
{
- struct pmic8xxx_pwrkey *pwrkey = platform_get_drvdata(pdev);
- int key_release_irq = platform_get_irq(pdev, 0);
- int key_press_irq = platform_get_irq(pdev, 1);
-
device_init_wakeup(&pdev->dev, 0);
- free_irq(key_press_irq, pwrkey);
- free_irq(key_release_irq, pwrkey);
- input_unregister_device(pwrkey->pwr);
- kfree(pwrkey);
-
return 0;
}
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 49c0c3ebd32..63b539d3dab 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -31,7 +31,6 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/usb/input.h>
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 940566e7be1..8ef288e7c97 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -68,7 +68,7 @@ static int pwm_beeper_event(struct input_dev *input,
static int pwm_beeper_probe(struct platform_device *pdev)
{
- unsigned long pwm_id = (unsigned long)pdev->dev.platform_data;
+ unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
struct pwm_beeper *beeper;
int error;
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
index 7ca09baa001..4bff1aa9b0d 100644
--- a/drivers/input/misc/retu-pwrbutton.c
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -17,7 +17,6 @@
*/
#include <linux/irq.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/input.h>
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index f920ba7ab51..99b9e42aa74 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/device.h>
diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c
index 95cf299ef9a..f10474937a6 100644
--- a/drivers/input/misc/sgi_btns.c
+++ b/drivers/input/misc/sgi_btns.c
@@ -17,7 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/init.h>
#include <linux/input-polldev.h>
#include <linux/ioport.h>
#include <linux/module.h>
diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c
index 7b8b03e0d0b..e8897c36d21 100644
--- a/drivers/input/misc/sirfsoc-onkey.c
+++ b/drivers/input/misc/sirfsoc-onkey.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index b9a05fda03e..fb3b63b2f85 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -52,15 +52,15 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
return IRQ_HANDLED;
}
-static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int twl4030_pwrbutton_probe(struct platform_device *pdev)
{
struct input_dev *pwr;
int irq = platform_get_irq(pdev, 0);
int err;
- pwr = input_allocate_device();
+ pwr = devm_input_allocate_device(&pdev->dev);
if (!pwr) {
- dev_dbg(&pdev->dev, "Can't allocate power button\n");
+ dev_err(&pdev->dev, "Can't allocate power button\n");
return -ENOMEM;
}
@@ -70,52 +70,42 @@ static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
pwr->phys = "twl4030_pwrbutton/input0";
pwr->dev.parent = &pdev->dev;
- err = request_threaded_irq(irq, NULL, powerbutton_irq,
+ err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"twl4030_pwrbutton", pwr);
if (err < 0) {
- dev_dbg(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
- goto free_input_dev;
+ dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+ return err;
}
err = input_register_device(pwr);
if (err) {
- dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
- goto free_irq;
+ dev_err(&pdev->dev, "Can't register power button: %d\n", err);
+ return err;
}
platform_set_drvdata(pdev, pwr);
return 0;
-
-free_irq:
- free_irq(irq, pwr);
-free_input_dev:
- input_free_device(pwr);
- return err;
}
-static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
-{
- struct input_dev *pwr = platform_get_drvdata(pdev);
- int irq = platform_get_irq(pdev, 0);
-
- free_irq(irq, pwr);
- input_unregister_device(pwr);
-
- return 0;
-}
+#ifdef CONFIG_OF
+static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
+ { .compatible = "ti,twl4030-pwrbutton" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
+#endif
static struct platform_driver twl4030_pwrbutton_driver = {
- .remove = __exit_p(twl4030_pwrbutton_remove),
+ .probe = twl4030_pwrbutton_probe,
.driver = {
.name = "twl4030_pwrbutton",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
},
};
-
-module_platform_driver_probe(twl4030_pwrbutton_driver,
- twl4030_pwrbutton_probe);
+module_platform_driver(twl4030_pwrbutton_driver);
MODULE_ALIAS("platform:twl4030_pwrbutton");
MODULE_DESCRIPTION("Triton2 Power Button");
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 68a5f33152a..960ef2a7091 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -185,15 +185,17 @@ static bool twl4030_vibra_check_coexist(struct twl4030_vibra_data *pdata,
if (pdata && pdata->coexist)
return true;
- if (of_find_node_by_name(node, "codec"))
+ if (of_find_node_by_name(node, "codec")) {
+ of_node_put(node);
return true;
+ }
return false;
}
static int twl4030_vibra_probe(struct platform_device *pdev)
{
- struct twl4030_vibra_data *pdata = pdev->dev.platform_data;
+ struct twl4030_vibra_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *twl4030_core_node = pdev->dev.parent->of_node;
struct vibra_info *info;
int ret;
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 7864b0c3ebb..77dc23b94eb 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -258,17 +258,14 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
static int twl6040_vibra_probe(struct platform_device *pdev)
{
struct device *twl6040_core_dev = pdev->dev.parent;
- struct device_node *twl6040_core_node = NULL;
+ struct device_node *twl6040_core_node;
struct vibra_info *info;
int vddvibl_uV = 0;
int vddvibr_uV = 0;
int ret;
-#ifdef CONFIG_OF
twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
"vibra");
-#endif
-
if (!twl6040_core_node) {
dev_err(&pdev->dev, "parent of node is missing?\n");
return -EINVAL;
@@ -276,6 +273,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
+ of_node_put(twl6040_core_node);
dev_err(&pdev->dev, "couldn't allocate memory\n");
return -ENOMEM;
}
@@ -295,6 +293,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
+ of_node_put(twl6040_core_node);
+
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
dev_err(info->dev, "invalid vibra driver/motor resistance\n");
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index caa2c4068f0..173b6dcca0d 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -18,7 +18,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/errno.h>
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 285a5bd6cbc..79c964c075f 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -47,7 +47,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/rwsem.h>