diff options
Diffstat (limited to 'drivers/input/mouse/hil_ptr.c')
-rw-r--r-- | drivers/input/mouse/hil_ptr.c | 97 |
1 files changed, 50 insertions, 47 deletions
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c index bfb174fe323..449bf4dcbbc 100644 --- a/drivers/input/mouse/hil_ptr.c +++ b/drivers/input/mouse/hil_ptr.c @@ -88,10 +88,12 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) idx = ptr->idx4/4; p = data[idx - 1]; - if ((p & ~HIL_CMDCT_POL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) goto report; - if ((p & ~HIL_CMDCT_RPL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) goto report; + if ((p & ~HIL_CMDCT_POL) == + (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) + goto report; + if ((p & ~HIL_CMDCT_RPL) == + (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) + goto report; /* Not a poll response. See if we are loading config records. */ switch (p & HIL_PKT_DATA_MASK) { @@ -101,27 +103,32 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) for (; i < HIL_PTR_MAX_LENGTH; i++) ptr->idd[i] = 0; break; + case HIL_CMD_RSC: for (i = 0; i < idx; i++) ptr->rsc[i] = ptr->data[i] & HIL_PKT_DATA_MASK; for (; i < HIL_PTR_MAX_LENGTH; i++) ptr->rsc[i] = 0; break; + case HIL_CMD_EXD: for (i = 0; i < idx; i++) ptr->exd[i] = ptr->data[i] & HIL_PKT_DATA_MASK; for (; i < HIL_PTR_MAX_LENGTH; i++) ptr->exd[i] = 0; break; + case HIL_CMD_RNM: for (i = 0; i < idx; i++) ptr->rnm[i] = ptr->data[i] & HIL_PKT_DATA_MASK; for (; i < HIL_PTR_MAX_LENGTH + 1; i++) - ptr->rnm[i] = '\0'; + ptr->rnm[i] = 0; break; + default: /* These occur when device isn't present */ - if (p == (HIL_ERR_INT | HIL_PKT_CMD)) break; + if (p == (HIL_ERR_INT | HIL_PKT_CMD)) + break; /* Anything else we'd like to know about. */ printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); break; @@ -130,7 +137,8 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) report: if ((p & HIL_CMDCT_POL) != idx - 1) { - printk(KERN_WARNING PREFIX "Malformed poll packet %x (idx = %i)\n", p, idx); + printk(KERN_WARNING PREFIX + "Malformed poll packet %x (idx = %i)\n", p, idx); goto out; } @@ -139,7 +147,7 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) laxis += i; ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */ - absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; + absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; for (cnt = 1; i < laxis; i++) { unsigned int lo,hi,val; @@ -157,7 +165,8 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) input_report_abs(dev, ABS_X + i, val); } else { val = (int) (((int8_t)lo) | ((int8_t)hi<<8)); - if (i%3) val *= -1; + if (i%3) + val *= -1; input_report_rel(dev, REL_X + i, val); } } @@ -168,10 +177,11 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) btn = ptr->data[cnt++]; up = btn & 1; btn &= 0xfe; - if (btn == 0x8e) { + if (btn == 0x8e) continue; /* TODO: proximity == touch? */ - } - else if ((btn > 0x8c) || (btn < 0x80)) continue; + else + if ((btn > 0x8c) || (btn < 0x80)) + continue; btn = (btn - 0x80) >> 1; btn = ptr->btnmap[btn]; input_report_key(dev, btn, !up); @@ -182,14 +192,14 @@ static void hil_ptr_process_record(struct hil_ptr *ptr) up(&ptr->sem); } -static void hil_ptr_process_err(struct hil_ptr *ptr) { +static void hil_ptr_process_err(struct hil_ptr *ptr) +{ printk(KERN_WARNING PREFIX "errored HIL packet\n"); ptr->idx4 = 0; up(&ptr->sem); - return; } -static irqreturn_t hil_ptr_interrupt(struct serio *serio, +static irqreturn_t hil_ptr_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct hil_ptr *ptr; @@ -197,29 +207,29 @@ static irqreturn_t hil_ptr_interrupt(struct serio *serio, int idx; ptr = serio_get_drvdata(serio); - if (ptr == NULL) { - BUG(); - return IRQ_HANDLED; - } + BUG_ON(ptr == NULL); if (ptr->idx4 >= (HIL_PTR_MAX_LENGTH * sizeof(hil_packet))) { hil_ptr_process_err(ptr); return IRQ_HANDLED; } idx = ptr->idx4/4; - if (!(ptr->idx4 % 4)) ptr->data[idx] = 0; + if (!(ptr->idx4 % 4)) + ptr->data[idx] = 0; packet = ptr->data[idx]; packet |= ((hil_packet)data) << ((3 - (ptr->idx4 % 4)) * 8); ptr->data[idx] = packet; /* Records of N 4-byte hil_packets must terminate with a command. */ - if ((++(ptr->idx4)) % 4) return IRQ_HANDLED; + if ((++(ptr->idx4)) % 4) + return IRQ_HANDLED; if ((packet & 0xffff0000) != HIL_ERR_INT) { hil_ptr_process_err(ptr); return IRQ_HANDLED; } - if (packet & HIL_PKT_CMD) + if (packet & HIL_PKT_CMD) hil_ptr_process_record(ptr); + return IRQ_HANDLED; } @@ -228,10 +238,7 @@ static void hil_ptr_disconnect(struct serio *serio) struct hil_ptr *ptr; ptr = serio_get_drvdata(serio); - if (ptr == NULL) { - BUG(); - return; - } + BUG_ON(ptr == NULL); serio_close(serio); input_unregister_device(ptr->dev); @@ -241,7 +248,7 @@ static void hil_ptr_disconnect(struct serio *serio) static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) { struct hil_ptr *ptr; - char *txt; + const char *txt; unsigned int i, naxsets, btntype; uint8_t did, *idd; @@ -252,42 +259,40 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) if (!ptr->dev) goto bail0; - ptr->dev->private = ptr; - if (serio_open(serio, driver)) goto bail1; serio_set_drvdata(serio, ptr); ptr->serio = serio; - init_MUTEX_LOCKED(&(ptr->sem)); + init_MUTEX_LOCKED(&ptr->sem); /* Get device info. MLC driver supplies devid/status/etc. */ serio->write(serio, 0); serio->write(serio, 0); serio->write(serio, HIL_PKT_CMD >> 8); serio->write(serio, HIL_CMD_IDD); - down(&(ptr->sem)); + down(&ptr->sem); serio->write(serio, 0); serio->write(serio, 0); serio->write(serio, HIL_PKT_CMD >> 8); serio->write(serio, HIL_CMD_RSC); - down(&(ptr->sem)); + down(&ptr->sem); serio->write(serio, 0); serio->write(serio, 0); serio->write(serio, HIL_PKT_CMD >> 8); serio->write(serio, HIL_CMD_RNM); - down(&(ptr->sem)); + down(&ptr->sem); serio->write(serio, 0); serio->write(serio, 0); serio->write(serio, HIL_PKT_CMD >> 8); serio->write(serio, HIL_CMD_EXD); - down(&(ptr->sem)); + down(&ptr->sem); - up(&(ptr->sem)); + up(&ptr->sem); did = ptr->idd[0]; idd = ptr->idd + 1; @@ -301,12 +306,12 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) ptr->dev->evbit[0] = BIT(EV_ABS); txt = "absolute"; } - if (!ptr->dev->evbit[0]) { + if (!ptr->dev->evbit[0]) goto bail2; - } ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd); - if (ptr->nbtn) ptr->dev->evbit[0] |= BIT(EV_KEY); + if (ptr->nbtn) + ptr->dev->evbit[0] |= BIT(EV_KEY); naxsets = HIL_IDD_NUM_AXSETS(*idd); ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd); @@ -315,7 +320,7 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) did, txt); printk(KERN_INFO PREFIX "HIL pointer has %i buttons and %i sets of %i axes\n", ptr->nbtn, naxsets, ptr->naxes); - + btntype = BTN_MISC; if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET) #ifdef TABLET_SIMULATES_MOUSE @@ -325,7 +330,7 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) #endif if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN) btntype = BTN_TOUCH; - + if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE) btntype = BTN_MOUSE; @@ -341,12 +346,10 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) } if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) { - for (i = 0; i < ptr->naxes; i++) { + for (i = 0; i < ptr->naxes; i++) set_bit(REL_X + i, ptr->dev->relbit); - } - for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) { + for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) set_bit(REL_X + i, ptr->dev->relbit); - } } else { for (i = 0; i < ptr->naxes; i++) { set_bit(ABS_X + i, ptr->dev->absbit); @@ -375,7 +378,7 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) ptr->dev->id.vendor = PCI_VENDOR_ID_HP; ptr->dev->id.product = 0x0001; /* TODO: get from ptr->rsc */ ptr->dev->id.version = 0x0100; /* TODO: get from ptr->rsc */ - ptr->dev->cdev.dev = &serio->dev; + ptr->dev->dev.parent = &serio->dev; input_register_device(ptr->dev); printk(KERN_INFO "input: %s (%s), ID: %d\n", @@ -419,11 +422,11 @@ static int __init hil_ptr_init(void) { return serio_register_driver(&hil_ptr_serio_driver); } - + static void __exit hil_ptr_exit(void) { serio_unregister_driver(&hil_ptr_serio_driver); } - + module_init(hil_ptr_init); module_exit(hil_ptr_exit); |