diff options
Diffstat (limited to 'drivers/input/mouse/hil_ptr.c')
| -rw-r--r-- | drivers/input/mouse/hil_ptr.c | 447 |
1 files changed, 0 insertions, 447 deletions
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c deleted file mode 100644 index cd12c2d8fa0..00000000000 --- a/drivers/input/mouse/hil_ptr.c +++ /dev/null @@ -1,447 +0,0 @@ -/* - * Generic linux-input device driver for axis-bearing devices - * - * Copyright (c) 2001 Brian S. Julin - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL"). - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * - * References: - * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A - * - */ - -#include <linux/hil.h> -#include <linux/input.h> -#include <linux/serio.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/pci_ids.h> - -#define PREFIX "HIL PTR: " -#define HIL_GENERIC_NAME "HIL pointer device" - -MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>"); -MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver"); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_ALIAS("serio:ty03pr25id0Fex*"); - -#define TABLET_SIMULATES_MOUSE /* allow tablet to be used as mouse */ -#undef TABLET_AUTOADJUST /* auto-adjust valid tablet ranges */ - - -#define HIL_PTR_MAX_LENGTH 16 - -struct hil_ptr { - struct input_dev *dev; - struct serio *serio; - - /* Input buffer and index for packets from HIL bus. */ - hil_packet data[HIL_PTR_MAX_LENGTH]; - int idx4; /* four counts per packet */ - - /* Raw device info records from HIL bus, see hil.h for fields. */ - char idd[HIL_PTR_MAX_LENGTH]; /* DID byte and IDD record */ - char rsc[HIL_PTR_MAX_LENGTH]; /* RSC record */ - char exd[HIL_PTR_MAX_LENGTH]; /* EXD record */ - char rnm[HIL_PTR_MAX_LENGTH + 1]; /* RNM record + NULL term. */ - - /* Extra device details not contained in struct input_dev. */ - unsigned int nbtn, naxes; - unsigned int btnmap[7]; - - /* Something to sleep around with. */ - struct semaphore sem; -}; - -/* Process a complete packet after transfer from the HIL */ -static void hil_ptr_process_record(struct hil_ptr *ptr) -{ - struct input_dev *dev = ptr->dev; - hil_packet *data = ptr->data; - hil_packet p; - int idx, i, cnt, laxis; - int ax16, absdev; - - idx = ptr->idx4/4; - p = data[idx - 1]; - - if ((p & ~HIL_CMDCT_POL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) - goto report; - if ((p & ~HIL_CMDCT_RPL) == - (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) - goto report; - - /* Not a poll response. See if we are loading config records. */ - switch (p & HIL_PKT_DATA_MASK) { - case HIL_CMD_IDD: - for (i = 0; i < idx; i++) - ptr->idd[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH; i++) - ptr->idd[i] = 0; - break; - - case HIL_CMD_RSC: - for (i = 0; i < idx; i++) - ptr->rsc[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH; i++) - ptr->rsc[i] = 0; - break; - - case HIL_CMD_EXD: - for (i = 0; i < idx; i++) - ptr->exd[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH; i++) - ptr->exd[i] = 0; - break; - - case HIL_CMD_RNM: - for (i = 0; i < idx; i++) - ptr->rnm[i] = ptr->data[i] & HIL_PKT_DATA_MASK; - for (; i < HIL_PTR_MAX_LENGTH + 1; i++) - ptr->rnm[i] = 0; - break; - - default: - /* These occur when device isn't present */ - if (p == (HIL_ERR_INT | HIL_PKT_CMD)) - break; - /* Anything else we'd like to know about. */ - printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); - break; - } - goto out; - - report: - if ((p & HIL_CMDCT_POL) != idx - 1) { - printk(KERN_WARNING PREFIX - "Malformed poll packet %x (idx = %i)\n", p, idx); - goto out; - } - - i = (ptr->data[0] & HIL_POL_AXIS_ALT) ? 3 : 0; - laxis = ptr->data[0] & HIL_POL_NUM_AXES_MASK; - laxis += i; - - ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */ - absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; - - for (cnt = 1; i < laxis; i++) { - unsigned int lo,hi,val; - lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK; - hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0; - if (absdev) { - val = lo + (hi<<8); -#ifdef TABLET_AUTOADJUST - if (val < dev->absmin[ABS_X + i]) - dev->absmin[ABS_X + i] = val; - if (val > dev->absmax[ABS_X + i]) - dev->absmax[ABS_X + i] = val; -#endif - if (i%3) val = dev->absmax[ABS_X + i] - val; - input_report_abs(dev, ABS_X + i, val); - } else { - val = (int) (((int8_t)lo) | ((int8_t)hi<<8)); - if (i%3) - val *= -1; - input_report_rel(dev, REL_X + i, val); - } - } - - while (cnt < idx - 1) { - unsigned int btn; - int up; - btn = ptr->data[cnt++]; - up = btn & 1; - btn &= 0xfe; - if (btn == 0x8e) - continue; /* TODO: proximity == touch? */ - else - if ((btn > 0x8c) || (btn < 0x80)) - continue; - btn = (btn - 0x80) >> 1; - btn = ptr->btnmap[btn]; - input_report_key(dev, btn, !up); - } - input_sync(dev); - out: - ptr->idx4 = 0; - up(&ptr->sem); -} - -static void hil_ptr_process_err(struct hil_ptr *ptr) -{ - printk(KERN_WARNING PREFIX "errored HIL packet\n"); - ptr->idx4 = 0; - up(&ptr->sem); -} - -static irqreturn_t hil_ptr_interrupt(struct serio *serio, - unsigned char data, unsigned int flags) -{ - struct hil_ptr *ptr; - hil_packet packet; - int idx; - - ptr = serio_get_drvdata(serio); - BUG_ON(ptr == NULL); - - if (ptr->idx4 >= (HIL_PTR_MAX_LENGTH * sizeof(hil_packet))) { - hil_ptr_process_err(ptr); - return IRQ_HANDLED; - } - idx = ptr->idx4/4; - if (!(ptr->idx4 % 4)) - ptr->data[idx] = 0; - packet = ptr->data[idx]; - packet |= ((hil_packet)data) << ((3 - (ptr->idx4 % 4)) * 8); - ptr->data[idx] = packet; - - /* Records of N 4-byte hil_packets must terminate with a command. */ - if ((++(ptr->idx4)) % 4) - return IRQ_HANDLED; - if ((packet & 0xffff0000) != HIL_ERR_INT) { - hil_ptr_process_err(ptr); - return IRQ_HANDLED; - } - if (packet & HIL_PKT_CMD) - hil_ptr_process_record(ptr); - - return IRQ_HANDLED; -} - -static void hil_ptr_disconnect(struct serio *serio) -{ - struct hil_ptr *ptr; - - ptr = serio_get_drvdata(serio); - BUG_ON(ptr == NULL); - - serio_close(serio); - input_unregister_device(ptr->dev); - kfree(ptr); -} - -static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) -{ - struct hil_ptr *ptr; - const char *txt; - unsigned int i, naxsets, btntype; - uint8_t did, *idd; - int error; - - ptr = kzalloc(sizeof(struct hil_ptr), GFP_KERNEL); - if (!ptr) - return -ENOMEM; - - ptr->dev = input_allocate_device(); - if (!ptr->dev) { - error = -ENOMEM; - goto bail0; - } - - error = serio_open(serio, driver); - if (error) - goto bail1; - - serio_set_drvdata(serio, ptr); - ptr->serio = serio; - - init_MUTEX_LOCKED(&ptr->sem); - - /* Get device info. MLC driver supplies devid/status/etc. */ - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_IDD); - down(&ptr->sem); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_RSC); - down(&ptr->sem); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_RNM); - down(&ptr->sem); - - serio_write(serio, 0); - serio_write(serio, 0); - serio_write(serio, HIL_PKT_CMD >> 8); - serio_write(serio, HIL_CMD_EXD); - down(&ptr->sem); - - up(&ptr->sem); - - did = ptr->idd[0]; - idd = ptr->idd + 1; - txt = "unknown"; - - if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) { - ptr->dev->evbit[0] = BIT_MASK(EV_REL); - txt = "relative"; - } - - if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_ABS) { - ptr->dev->evbit[0] = BIT_MASK(EV_ABS); - txt = "absolute"; - } - - if (!ptr->dev->evbit[0]) { - error = -ENODEV; - goto bail2; - } - - ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd); - if (ptr->nbtn) - ptr->dev->evbit[0] |= BIT_MASK(EV_KEY); - - naxsets = HIL_IDD_NUM_AXSETS(*idd); - ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd); - - printk(KERN_INFO PREFIX "HIL pointer device found (did: 0x%02x, axis: %s)\n", - did, txt); - printk(KERN_INFO PREFIX "HIL pointer has %i buttons and %i sets of %i axes\n", - ptr->nbtn, naxsets, ptr->naxes); - - btntype = BTN_MISC; - if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET) -#ifdef TABLET_SIMULATES_MOUSE - btntype = BTN_TOUCH; -#else - btntype = BTN_DIGI; -#endif - if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN) - btntype = BTN_TOUCH; - - if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE) - btntype = BTN_MOUSE; - - for (i = 0; i < ptr->nbtn; i++) { - set_bit(btntype | i, ptr->dev->keybit); - ptr->btnmap[i] = btntype | i; - } - - if (btntype == BTN_MOUSE) { - /* Swap buttons 2 and 3 */ - ptr->btnmap[1] = BTN_MIDDLE; - ptr->btnmap[2] = BTN_RIGHT; - } - - if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) { - for (i = 0; i < ptr->naxes; i++) - set_bit(REL_X + i, ptr->dev->relbit); - for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) - set_bit(REL_X + i, ptr->dev->relbit); - } else { - for (i = 0; i < ptr->naxes; i++) { - set_bit(ABS_X + i, ptr->dev->absbit); - ptr->dev->absmin[ABS_X + i] = 0; - ptr->dev->absmax[ABS_X + i] = - HIL_IDD_AXIS_MAX((ptr->idd + 1), i); - } - for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) { - set_bit(ABS_X + i, ptr->dev->absbit); - ptr->dev->absmin[ABS_X + i] = 0; - ptr->dev->absmax[ABS_X + i] = - HIL_IDD_AXIS_MAX((ptr->idd + 1), (i - 3)); - } -#ifdef TABLET_AUTOADJUST - for (i = 0; i < ABS_MAX; i++) { - int diff = ptr->dev->absmax[ABS_X + i] / 10; - ptr->dev->absmin[ABS_X + i] += diff; - ptr->dev->absmax[ABS_X + i] -= diff; - } -#endif - } - - ptr->dev->name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME; - - ptr->dev->id.bustype = BUS_HIL; - ptr->dev->id.vendor = PCI_VENDOR_ID_HP; - ptr->dev->id.product = 0x0001; /* TODO: get from ptr->rsc */ - ptr->dev->id.version = 0x0100; /* TODO: get from ptr->rsc */ - ptr->dev->dev.parent = &serio->dev; - - error = input_register_device(ptr->dev); - if (error) { - printk(KERN_INFO PREFIX "Unable to register input device\n"); - goto bail2; - } - - printk(KERN_INFO "input: %s (%s), ID: %d\n", - ptr->dev->name, - (btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad", - did); - - return 0; - - bail2: - serio_close(serio); - bail1: - input_free_device(ptr->dev); - bail0: - kfree(ptr); - serio_set_drvdata(serio, NULL); - return error; -} - -static struct serio_device_id hil_ptr_ids[] = { - { - .type = SERIO_HIL_MLC, - .proto = SERIO_HIL, - .id = SERIO_ANY, - .extra = SERIO_ANY, - }, - { 0 } -}; - -static struct serio_driver hil_ptr_serio_driver = { - .driver = { - .name = "hil_ptr", - }, - .description = "HP HIL mouse/tablet driver", - .id_table = hil_ptr_ids, - .connect = hil_ptr_connect, - .disconnect = hil_ptr_disconnect, - .interrupt = hil_ptr_interrupt -}; - -static int __init hil_ptr_init(void) -{ - return serio_register_driver(&hil_ptr_serio_driver); -} - -static void __exit hil_ptr_exit(void) -{ - serio_unregister_driver(&hil_ptr_serio_driver); -} - -module_init(hil_ptr_init); -module_exit(hil_ptr_exit); |