summaryrefslogtreecommitdiffstats
path: root/drivers/input/serio/i8042.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/serio/i8042.c')
-rw-r--r--drivers/input/serio/i8042.c39
1 files changed, 14 insertions, 25 deletions
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 7e3141f37e3..debe9445488 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -255,25 +255,10 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
static int i8042_aux_write(struct serio *serio, unsigned char c)
{
struct i8042_port *port = serio->port_data;
- int retval;
-
-/*
- * Send the byte out.
- */
-
- if (port->mux == -1)
- retval = i8042_command(&c, I8042_CMD_AUX_SEND);
- else
- retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux);
-
-/*
- * Make sure the interrupt happens and the character is received even
- * in the case the IRQ isn't wired, so that we can receive further
- * characters later.
- */
- i8042_interrupt(0, NULL);
- return retval;
+ return i8042_command(&c, port->mux == -1 ?
+ I8042_CMD_AUX_SEND :
+ I8042_CMD_MUX_SEND + port->mux);
}
/*
@@ -337,23 +322,27 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
dfl = 0;
if (str & I8042_STR_MUXERR) {
dbg("MUX error, status is %02x, data is %02x", str, data);
- switch (data) {
- default:
/*
* When MUXERR condition is signalled the data register can only contain
* 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
- * it is not always the case. Some KBC just get confused which port the
- * data came from and signal error leaving the data intact. They _do not_
- * revert to legacy mode (actually I've never seen KBC reverting to legacy
- * mode yet, when we see one we'll add proper handling).
- * Anyway, we will assume that the data came from the same serio last byte
+ * it is not always the case. Some KBCs also report 0xfc when there is
+ * nothing connected to the port while others sometimes get confused which
+ * port the data came from and signal error leaving the data intact. They
+ * _do not_ revert to legacy mode (actually I've never seen KBC reverting
+ * to legacy mode yet, when we see one we'll add proper handling).
+ * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the
+ * rest assume that the data came from the same serio last byte
* was transmitted (if transmission happened not too long ago).
*/
+
+ switch (data) {
+ default:
if (time_before(jiffies, last_transmit + HZ/10)) {
str = last_str;
break;
}
/* fall through - report timeout */
+ case 0xfc:
case 0xfd:
case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break;
case 0xff: dfl = SERIO_PARITY; data = 0xfe; break;