4 files changed, 426 insertions, 374 deletions

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index f606e96bc2f..8738edda661 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -160,6 +160,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		},
 	},
 	{
+		.ident = "Toshiba Equium A110",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
+		},
+	},
+	{
 		.ident = "Alienware Sentia",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
@@ -180,6 +187,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
 		},
 	},
+	{
+		.ident = "Amoi M636/A737",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 06a3f25657d..1bb0c76a925 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -90,46 +90,24 @@ static DEFINE_SPINLOCK(i8042_lock);
 struct i8042_port {
 	struct serio *serio;
 	int irq;
-	unsigned char disable;
-	unsigned char irqen;
 	unsigned char exists;
 	signed char mux;
-	char name[8];
 };
 
 #define I8042_KBD_PORT_NO	0
 #define I8042_AUX_PORT_NO	1
 #define I8042_MUX_PORT_NO	2
 #define I8042_NUM_PORTS		(I8042_NUM_MUX_PORTS + 2)
-static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
-	{
-		.disable	= I8042_CTR_KBDDIS,
-		.irqen		= I8042_CTR_KBDINT,
-		.mux		= -1,
-		.name		= "KBD",
-	},
-	{
-		.disable	= I8042_CTR_AUXDIS,
-		.irqen		= I8042_CTR_AUXINT,
-		.mux		= -1,
-		.name		= "AUX",
-	}
-};
+
+static struct i8042_port i8042_ports[I8042_NUM_PORTS];
 
 static unsigned char i8042_initial_ctr;
 static unsigned char i8042_ctr;
-static unsigned char i8042_mux_open;
 static unsigned char i8042_mux_present;
-static struct timer_list i8042_timer;
+static unsigned char i8042_kbd_irq_registered;
+static unsigned char i8042_aux_irq_registered;
 static struct platform_device *i8042_platform_device;
 
-
-/*
- * Shared IRQ's require a device pointer, but this driver doesn't support
- * multiple devices
- */
-#define i8042_request_irq_cookie (&i8042_timer)
-
 static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
 /*
@@ -141,6 +119,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 static int i8042_wait_read(void)
 {
 	int i = 0;
+
 	while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
 		udelay(50);
 		i++;
@@ -151,6 +130,7 @@ static int i8042_wait_read(void)
 static int i8042_wait_write(void)
 {
 	int i = 0;
+
 	while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
 		udelay(50);
 		i++;
@@ -192,48 +172,57 @@ static int i8042_flush(void)
  * encoded in bits 8-11 of the command number.
  */
 
-static int i8042_command(unsigned char *param, int command)
+static int __i8042_command(unsigned char *param, int command)
 {
-	unsigned long flags;
-	int i, retval, auxerr = 0;
+	int i, error;
 
 	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
 		return -1;
 
-	spin_lock_irqsave(&i8042_lock, flags);
-
-	if ((retval = i8042_wait_write()))
-		goto out;
+	error = i8042_wait_write();
+	if (error)
+		return error;
 
 	dbg("%02x -> i8042 (command)", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
-		if ((retval = i8042_wait_write()))
-			goto out;
+		error = i8042_wait_write();
+		if (error)
+			return error;
 		dbg("%02x -> i8042 (parameter)", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
-		if ((retval = i8042_wait_read()))
-			goto out;
+		error = i8042_wait_read();
+		if (error) {
+			dbg("     -- i8042 (timeout)");
+			return error;
+		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			retval = auxerr = -1;
-			goto out;
+			dbg("     -- i8042 (auxerr)");
+			return -1;
 		}
 
 		param[i] = i8042_read_data();
 		dbg("%02x <- i8042 (return)", param[i]);
 	}
 
-	if (retval)
-		dbg("     -- i8042 (%s)", auxerr ? "auxerr" : "timeout");
+	return 0;
+}
 
- out:
+static int i8042_command(unsigned char *param, int command)
+{
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+	retval = __i8042_command(param, command);
 	spin_unlock_irqrestore(&i8042_lock, flags);
+
 	return retval;
 }
 
@@ -248,7 +237,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 
 	spin_lock_irqsave(&i8042_lock, flags);
 
-	if(!(retval = i8042_wait_write())) {
+	if (!(retval = i8042_wait_write())) {
 		dbg("%02x -> i8042 (kbd-data)", c);
 		i8042_write_data(c);
 	}
@@ -287,100 +276,6 @@ static int i8042_aux_write(struct serio *serio, unsigned char c)
 }
 
 /*
- * i8042_activate_port() enables port on a chip.
- */
-
-static int i8042_activate_port(struct i8042_port *port)
-{
-	if (!port->serio)
-		return -1;
-
-	i8042_flush();
-
-	/*
-	 * Enable port again here because it is disabled if we are
-	 * resuming (normally it is enabled already).
-	 */
-	i8042_ctr &= ~port->disable;
-
-	i8042_ctr |= port->irqen;
-
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		i8042_ctr &= ~port->irqen;
-		return -1;
-	}
-
-	return 0;
-}
-
-
-/*
- * i8042_open() is called when a port is open by the higher layer.
- * It allocates the interrupt and calls i8042_enable_port.
- */
-
-static int i8042_open(struct serio *serio)
-{
-	struct i8042_port *port = serio->port_data;
-
-	if (port->mux != -1)
-		if (i8042_mux_open++)
-			return 0;
-
-	if (request_irq(port->irq, i8042_interrupt,
-			IRQF_SHARED, "i8042", i8042_request_irq_cookie)) {
-		printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", port->irq, port->name);
-		goto irq_fail;
-	}
-
-	if (i8042_activate_port(port)) {
-		printk(KERN_ERR "i8042.c: Can't activate %s, unregistering the port\n", port->name);
-		goto activate_fail;
-	}
-
-	i8042_interrupt(0, NULL, NULL);
-
-	return 0;
-
- activate_fail:
-	free_irq(port->irq, i8042_request_irq_cookie);
-
- irq_fail:
-	serio_unregister_port_delayed(serio);
-
-	return -1;
-}
-
-/*
- * i8042_close() frees the interrupt, so that it can possibly be used
- * by another driver. We never know - if the user doesn't have a mouse,
- * the BIOS could have used the AUX interrupt for PCI.
- */
-
-static void i8042_close(struct serio *serio)
-{
-	struct i8042_port *port = serio->port_data;
-
-	if (port->mux != -1)
-		if (--i8042_mux_open)
-			return;
-
-	i8042_ctr &= ~port->irqen;
-
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042.c: Can't write CTR while closing %s.\n", port->name);
-/*
- * We still want to continue and free IRQ so if more data keeps coming in
- * kernel will just ignore the irq.
- */
-	}
-
-	free_irq(port->irq, i8042_request_irq_cookie);
-
-	i8042_flush();
-}
-
-/*
  * i8042_start() is called by serio core when port is about to finish
  * registering. It will mark port as existing so i8042_interrupt can
  * start sending data through it.
@@ -423,8 +318,6 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	unsigned int port_no;
 	int ret;
 
-	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
-
 	spin_lock_irqsave(&i8042_lock, flags);
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
@@ -480,8 +373,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	port = &i8042_ports[port_no];
 
-	dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
-	    data, port->name, irq,
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
 
@@ -494,6 +387,58 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 }
 
 /*
+ * i8042_enable_kbd_port enables keybaord port on chip
+ */
+
+static int i8042_enable_kbd_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_KBDDIS;
+	i8042_ctr |= I8042_CTR_KBDINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_aux_port enables AUX (mouse) port on chip
+ */
+
+static int i8042_enable_aux_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_AUXDIS;
+	i8042_ctr |= I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_mux_ports enables 4 individual AUX ports after
+ * the controller has been switched into Multiplexed mode
+ */
+
+static int i8042_enable_mux_ports(void)
+{
+	unsigned char param;
+	int i;
+
+	for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+		i8042_command(&param, I8042_CMD_MUX_PFX + i);
+		i8042_command(&param, I8042_CMD_AUX_ENABLE);
+	}
+
+	return i8042_enable_aux_port();
+}
+
+/*
  * i8042_set_mux_mode checks whether the controller has an active
  * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
  */
@@ -510,8 +455,7 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
 
 /*
  * Internal loopback test - send three bytes, they should come back from the
- * mouse interface, the last should be version. Note that we negate mouseport
- * command responses for the i8042_check_aux() routine.
+ * mouse interface, the last should be version.
  */
 
 	param = 0xf0;
@@ -530,67 +474,67 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
 	return 0;
 }
 
-
 /*
- * i8042_enable_mux_ports enables 4 individual AUX ports after
- * the controller has been switched into Multiplexed mode
+ * i8042_check_mux() checks whether the controller supports the PS/2 Active
+ * Multiplexing specification by Synaptics, Phoenix, Insyde and
+ * LCS/Telegraphics.
  */
 
-static int i8042_enable_mux_ports(void)
+static int __devinit i8042_check_mux(void)
 {
-	unsigned char param;
-	int i;
+	unsigned char mux_version;
+
+	if (i8042_set_mux_mode(1, &mux_version))
+		return -1;
+
 /*
- * Disable all muxed ports by disabling AUX.
+ * Workaround for interference with USB Legacy emulation
+ * that causes a v10.12 MUX to be found.
  */
+	if (mux_version == 0xAC)
+		return -1;
+
+	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
+/*
+ * Disable all muxed ports by disabling AUX.
+ */
 	i8042_ctr |= I8042_CTR_AUXDIS;
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
-		return -1;
+		return -EIO;
 	}
 
-/*
- * Enable all muxed ports.
- */
-
-	for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
-		i8042_command(&param, I8042_CMD_MUX_PFX + i);
-		i8042_command(&param, I8042_CMD_AUX_ENABLE);
-	}
+	i8042_mux_present = 1;
 
 	return 0;
 }
 
-
 /*
- * i8042_check_mux() checks whether the controller supports the PS/2 Active
- * Multiplexing specification by Synaptics, Phoenix, Insyde and
- * LCS/Telegraphics.
+ * The following is used to test AUX IRQ delivery.
  */
+static struct completion i8042_aux_irq_delivered __devinitdata;
+static int i8042_irq_being_tested __devinitdata;
 
-static int __devinit i8042_check_mux(void)
+static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
-	unsigned char mux_version;
-
-	if (i8042_set_mux_mode(1, &mux_version))
-		return -1;
-
-	/* Workaround for interference with USB Legacy emulation */
-	/* that causes a v10.12 MUX to be found. */
-	if (mux_version == 0xAC)
-		return -1;
-
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
-		(mux_version >> 4) & 0xf, mux_version & 0xf);
+	unsigned long flags;
+	unsigned char str, data;
 
-	if (i8042_enable_mux_ports())
-		return -1;
+	spin_lock_irqsave(&i8042_lock, flags);
+	str = i8042_read_status();
+	if (str & I8042_STR_OBF) {
+		data = i8042_read_data();
+		if (i8042_irq_being_tested &&
+		    data == 0xa5 && (str & I8042_STR_AUXDATA))
+			complete(&i8042_aux_irq_delivered);
+	}
+	spin_unlock_irqrestore(&i8042_lock, flags);
 
-	i8042_mux_present = 1;
-	return 0;
+	return IRQ_HANDLED;
 }
 
 
@@ -601,18 +545,10 @@ static int __devinit i8042_check_mux(void)
 
 static int __devinit i8042_check_aux(void)
 {
+	int retval = -1;
+	int irq_registered = 0;
+	unsigned long flags;
 	unsigned char param;
-	static int i8042_check_aux_cookie;
-
-/*
- * Check if AUX irq is available. If it isn't, then there is no point
- * in trying to detect AUX presence.
- */
-
-	if (request_irq(i8042_ports[I8042_AUX_PORT_NO].irq, i8042_interrupt,
-			IRQF_SHARED, "i8042", &i8042_check_aux_cookie))
-                return -1;
-	free_irq(i8042_ports[I8042_AUX_PORT_NO].irq, &i8042_check_aux_cookie);
 
 /*
  * Get rid of bytes in the queue.
@@ -637,9 +573,9 @@ static int __devinit i8042_check_aux(void)
  * AUX ports, we test for this only when the LOOP command failed.
  */
 
-		if (i8042_command(&param, I8042_CMD_AUX_TEST)
-			|| (param && param != 0xfa && param != 0xff))
-				return -1;
+		if (i8042_command(&param, I8042_CMD_AUX_TEST) ||
+		    (param && param != 0xfa && param != 0xff))
+			return -1;
 	}
 
 /*
@@ -659,54 +595,80 @@ static int __devinit i8042_check_aux(void)
 		return -1;
 
 /*
- * Disable the interface.
+ * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
+ * used it for a PCI card or somethig else.
  */
 
-	i8042_ctr |= I8042_CTR_AUXDIS;
-	i8042_ctr &= ~I8042_CTR_AUXINT;
+	if (i8042_noloop) {
+/*
+ * Without LOOP command we can't test AUX IRQ delivery. Assume the port
+ * is working and hope we are right.
+ */
+		retval = 0;
+		goto out;
+	}
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		return -1;
+	if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED,
+			"i8042", i8042_platform_device))
+		goto out;
 
-	return 0;
-}
+	irq_registered = 1;
+
+	if (i8042_enable_aux_port())
+		goto out;
+
+	spin_lock_irqsave(&i8042_lock, flags);
 
+	init_completion(&i8042_aux_irq_delivered);
+	i8042_irq_being_tested = 1;
+
+	param = 0xa5;
+	retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	if (retval)
+		goto out;
 
+	if (wait_for_completion_timeout(&i8042_aux_irq_delivered,
+					msecs_to_jiffies(250)) == 0) {
 /*
- * i8042_port_register() marks the device as existing,
- * registers it, and reports to the user.
+ * AUX IRQ was never delivered so we need to flush the controller to
+ * get rid of the byte we put there; otherwise keyboard may not work.
  */
+		i8042_flush();
+		retval = -1;
+	}
 
-static int __devinit i8042_port_register(struct i8042_port *port)
-{
-	i8042_ctr &= ~port->disable;
+ out:
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
-		kfree(port->serio);
-		port->serio = NULL;
-		i8042_ctr |= port->disable;
-		return -EIO;
-	}
+/*
+ * Disable the interface.
+ */
 
-	printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n",
-	       port->name,
-	       (unsigned long) I8042_DATA_REG,
-	       (unsigned long) I8042_COMMAND_REG,
-	       port->irq);
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
 
-	serio_register_port(port->serio);
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		retval = -1;
 
-	return 0;
-}
+	if (irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
 
+	return retval;
+}
 
-static void i8042_timer_func(unsigned long data)
+static int i8042_controller_check(void)
 {
-	i8042_interrupt(0, NULL, NULL);
+	if (i8042_flush() == I8042_BUFFER_SIZE) {
+		printk(KERN_ERR "i8042.c: No controller found.\n");
+		return -ENODEV;
+	}
+
+	return 0;
 }
 
-static int i8042_ctl_test(void)
+static int i8042_controller_selftest(void)
 {
 	unsigned char param;
 
@@ -715,13 +677,13 @@ static int i8042_ctl_test(void)
 
 	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
 		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-		return -1;
+		return -ENODEV;
 	}
 
 	if (param != I8042_RET_CTL_TEST) {
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
 			 param, I8042_RET_CTL_TEST);
-		return -1;
+		return -EIO;
 	}
 
 	return 0;
@@ -738,25 +700,12 @@ static int i8042_controller_init(void)
 	unsigned long flags;
 
 /*
- * Test the i8042. We need to know if it thinks it's working correctly
- * before doing anything else.
- */
-
-	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
-		return -1;
-	}
-
-	if (i8042_ctl_test())
-		return -1;
-
-/*
  * Save the CTR for restoral on unload / reboot.
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
 		printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
-		return -1;
+		return -EIO;
 	}
 
 	i8042_initial_ctr = i8042_ctr;
@@ -805,7 +754,7 @@ static int i8042_controller_init(void)
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
-		return -1;
+		return -EIO;
 	}
 
 	return 0;
@@ -813,15 +762,12 @@ static int i8042_controller_init(void)
 
 
 /*
- * Reset the controller.
+ * Reset the controller and reset CRT to the original value set by BIOS.
  */
+
 static void i8042_controller_reset(void)
 {
-/*
- * Reset the controller if requested.
- */
-
-	i8042_ctl_test();
+	i8042_flush();
 
 /*
  * Disable MUX mode if present.
@@ -831,12 +777,16 @@ static void i8042_controller_reset(void)
 		i8042_set_mux_mode(0, NULL);
 
 /*
- * Restore the original control register setting.
+ * Reset the controller if requested.
  */
 
-	i8042_ctr = i8042_initial_ctr;
+	i8042_controller_selftest();
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+/*
+ * Restore the original control register setting.
+ */
+
+	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
 		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
 }
 
@@ -850,14 +800,12 @@ static void i8042_controller_cleanup(void)
 {
 	int i;
 
-	i8042_flush();
-
 /*
  * Reset anything that is connected to the ports.
  */
 
 	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].exists)
+		if (i8042_ports[i].serio)
 			serio_cleanup(i8042_ports[i].serio);
 
 	i8042_controller_reset();
@@ -913,8 +861,7 @@ static long i8042_panic_blink(long count)
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-	del_timer_sync(&i8042_timer);
-	i8042_controller_reset();
+	i8042_controller_cleanup();
 
 	return 0;
 }
@@ -926,33 +873,39 @@ static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 
 static int i8042_resume(struct platform_device *dev)
 {
-	int i;
+	int error;
 
-	if (i8042_ctl_test())
-		return -1;
+	error = i8042_controller_check();
+	if (error)
+		return error;
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042: Can't write CTR\n");
-		return -1;
-	}
-
-	if (i8042_mux_present)
-		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n");
+	error = i8042_controller_selftest();
+	if (error)
+		return error;
 
 /*
- * Activate all ports.
+ * Restore pre-resume CTR value and disable all ports
  */
 
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		i8042_activate_port(&i8042_ports[i]);
+	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
+	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042: Can't write CTR to resume\n");
+		return -EIO;
+	}
 
-/*
- * Restart timer (for polling "stuck" data)
- */
-	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
+	if (i8042_mux_present) {
+		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
+			printk(KERN_WARNING
+				"i8042: failed to resume active multiplexor, "
+				"mouse won't work.\n");
+	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
+		i8042_enable_aux_port();
 
-	panic_blink = i8042_panic_blink;
+	if (i8042_ports[I8042_KBD_PORT_NO].serio)
+		i8042_enable_kbd_port();
+
+	i8042_interrupt(0, NULL, NULL);
 
 	return 0;
 }
@@ -978,24 +931,24 @@ static int __devinit i8042_create_kbd_port(void)
 
 	serio->id.type		= i8042_direct ? SERIO_8042 : SERIO_8042_XL;
 	serio->write		= i8042_dumbkbd ? NULL : i8042_kbd_write;
-	serio->open		= i8042_open;
-	serio->close		= i8042_close;
 	serio->start		= i8042_start;
 	serio->stop		= i8042_stop;
 	serio->port_data	= port;
 	serio->dev.parent	= &i8042_platform_device->dev;
-	strlcpy(serio->name, "i8042 Kbd Port", sizeof(serio->name));
+	strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
 	strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
 
 	port->serio = serio;
+	port->irq = I8042_KBD_IRQ;
 
-	return i8042_port_register(port);
+	return 0;
 }
 
-static int __devinit i8042_create_aux_port(void)
+static int __devinit i8042_create_aux_port(int idx)
 {
 	struct serio *serio;
-	struct i8042_port *port = &i8042_ports[I8042_AUX_PORT_NO];
+	int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
+	struct i8042_port *port = &i8042_ports[port_no];
 
 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
 	if (!serio)
@@ -1003,111 +956,191 @@ static int __devinit i8042_create_aux_port(void)
 
 	serio->id.type		= SERIO_8042;
 	serio->write		= i8042_aux_write;
-	serio->open		= i8042_open;
-	serio->close		= i8042_close;
 	serio->start		= i8042_start;
 	serio->stop		= i8042_stop;
 	serio->port_data	= port;
 	serio->dev.parent	= &i8042_platform_device->dev;
-	strlcpy(serio->name, "i8042 Aux Port", sizeof(serio->name));
-	strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+	if (idx < 0) {
+		strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
+		strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+	} else {
+		snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
+		snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
+	}
 
 	port->serio = serio;
+	port->mux = idx;
+	port->irq = I8042_AUX_IRQ;
 
-	return i8042_port_register(port);
+	return 0;
 }
 
-static int __devinit i8042_create_mux_port(int index)
+static void __devinit i8042_free_kbd_port(void)
 {
-	struct serio *serio;
-	struct i8042_port *port = &i8042_ports[I8042_MUX_PORT_NO + index];
+	kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
+	i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
+}
 
-	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!serio)
-		return -ENOMEM;
+static void __devinit i8042_free_aux_ports(void)
+{
+	int i;
 
-	serio->id.type		= SERIO_8042;
-	serio->write		= i8042_aux_write;
-	serio->open		= i8042_open;
-	serio->close		= i8042_close;
-	serio->start		= i8042_start;
-	serio->stop		= i8042_stop;
-	serio->port_data	= port;
-	serio->dev.parent	= &i8042_platform_device->dev;
-	snprintf(serio->name, sizeof(serio->name), "i8042 Aux-%d Port", index);
-	snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, index + 1);
+	for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) {
+		kfree(i8042_ports[i].serio);
+		i8042_ports[i].serio = NULL;
+	}
+}
 
-	*port = i8042_ports[I8042_AUX_PORT_NO];
-	port->exists = 0;
-	snprintf(port->name, sizeof(port->name), "AUX%d", index);
-	port->mux = index;
-	port->serio = serio;
+static void __devinit i8042_register_ports(void)
+{
+	int i;
 
-	return i8042_port_register(port);
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		if (i8042_ports[i].serio) {
+			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+				i8042_ports[i].serio->name,
+				(unsigned long) I8042_DATA_REG,
+				(unsigned long) I8042_COMMAND_REG,
+				i8042_ports[i].irq);
+			serio_register_port(i8042_ports[i].serio);
+		}
+	}
 }
 
-static int __devinit i8042_probe(struct platform_device *dev)
+static void __devinit i8042_unregister_ports(void)
 {
-	int i, have_ports = 0;
-	int err;
+	int i;
 
-	init_timer(&i8042_timer);
-	i8042_timer.function = i8042_timer_func;
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		if (i8042_ports[i].serio) {
+			serio_unregister_port(i8042_ports[i].serio);
+			i8042_ports[i].serio = NULL;
+		}
+	}
+}
+
+static void i8042_free_irqs(void)
+{
+	if (i8042_aux_irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
+	if (i8042_kbd_irq_registered)
+		free_irq(I8042_KBD_IRQ, i8042_platform_device);
+
+	i8042_aux_irq_registered = i8042_kbd_irq_registered = 0;
+}
+
+static int __devinit i8042_setup_aux(void)
+{
+	int (*aux_enable)(void);
+	int error;
+	int i;
 
-	if (i8042_controller_init())
+	if (i8042_check_aux())
 		return -ENODEV;
 
-	if (!i8042_noaux && !i8042_check_aux()) {
-		if (!i8042_nomux && !i8042_check_mux()) {
-			for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
-				err = i8042_create_mux_port(i);
-				if (err)
-					goto err_unregister_ports;
-			}
-		} else {
-			err = i8042_create_aux_port();
-			if (err)
-				goto err_unregister_ports;
+	if (i8042_nomux || i8042_check_mux()) {
+		error = i8042_create_aux_port(-1);
+		if (error)
+			goto err_free_ports;
+		aux_enable = i8042_enable_aux_port;
+	} else {
+		for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+			error = i8042_create_aux_port(i);
+			if (error)
+				goto err_free_ports;
 		}
-		have_ports = 1;
+		aux_enable = i8042_enable_mux_ports;
 	}
 
-	if (!i8042_nokbd) {
-		err = i8042_create_kbd_port();
-		if (err)
-			goto err_unregister_ports;
-		have_ports = 1;
-	}
+	error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_ports;
 
-	if (!have_ports) {
-		err = -ENODEV;
-		goto err_controller_cleanup;
-	}
+	if (aux_enable())
+		goto err_free_irq;
 
-	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
+	i8042_aux_irq_registered = 1;
 	return 0;
 
- err_unregister_ports:
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].serio)
-			serio_unregister_port(i8042_ports[i].serio);
- err_controller_cleanup:
-	i8042_controller_cleanup();
+ err_free_irq:
+	free_irq(I8042_AUX_IRQ, i8042_platform_device);
+ err_free_ports:
+	i8042_free_aux_ports();
+	return error;
+}
 
-	return err;
+static int __devinit i8042_setup_kbd(void)
+{
+	int error;
+
+	error = i8042_create_kbd_port();
+	if (error)
+		return error;
+
+	error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_port;
+
+	error = i8042_enable_kbd_port();
+	if (error)
+		goto err_free_irq;
+
+	i8042_kbd_irq_registered = 1;
+	return 0;
+
+ err_free_irq:
+	free_irq(I8042_KBD_IRQ, i8042_platform_device);
+ err_free_port:
+	i8042_free_kbd_port();
+	return error;
 }
 
-static int __devexit i8042_remove(struct platform_device *dev)
+static int __devinit i8042_probe(struct platform_device *dev)
 {
-	int i;
+	int error;
 
-	i8042_controller_cleanup();
+	error = i8042_controller_selftest();
+	if (error)
+		return error;
 
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].exists)
-			serio_unregister_port(i8042_ports[i].serio);
+	error = i8042_controller_init();
+	if (error)
+		return error;
+
+	if (!i8042_noaux) {
+		error = i8042_setup_aux();
+		if (error && error != -ENODEV && error != -EBUSY)
+			goto out_fail;
+	}
+
+	if (!i8042_nokbd) {
+		error = i8042_setup_kbd();
+		if (error)
+			goto out_fail;
+	}
 
-	del_timer_sync(&i8042_timer);
+/*
+ * Ok, everything is ready, let's register all serio ports
+ */
+	i8042_register_ports();
+
+	return 0;
+
+ out_fail:
+	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
+	i8042_free_irqs();
+	i8042_controller_reset();
+
+	return error;
+}
+
+static int __devexit i8042_remove(struct platform_device *dev)
+{
+	i8042_unregister_ports();
+	i8042_free_irqs();
+	i8042_controller_reset();
 
 	return 0;
 }
@@ -1134,8 +1167,9 @@ static int __init i8042_init(void)
 	if (err)
 		return err;
 
-	i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ;
-	i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ;
+	err = i8042_controller_check();
+	if (err)
+		goto err_platform_exit;
 
 	err = platform_driver_register(&i8042_driver);
 	if (err)
@@ -1151,6 +1185,8 @@ static int __init i8042_init(void)
 	if (err)
 		goto err_free_device;
 
+	panic_blink = i8042_panic_blink;
+
 	return 0;
 
  err_free_device:
@@ -1167,7 +1203,6 @@ static void __exit i8042_exit(void)
 {
 	platform_device_unregister(i8042_platform_device);
 	platform_driver_unregister(&i8042_driver);
-
 	i8042_platform_exit();
 
 	panic_blink = NULL;
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index af526ab9ec0..b3eb7a72d96 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -37,15 +37,6 @@
 #define I8042_CTL_TIMEOUT	10000
 
 /*
- * When the device isn't opened and it's interrupts aren't used, we poll it at
- * regular intervals to see if any characters arrived. If yes, we can start
- * probing for any mouse / keyboard connected. This is the period of the
- * polling.
- */
-
-#define I8042_POLL_PERIOD	HZ/20
-
-/*
  * Status register bits.
  */
 
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index ed202f2f251..dcb16b5cbec 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -27,15 +27,6 @@ MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
 MODULE_DESCRIPTION("PS/2 driver library");
 MODULE_LICENSE("GPL");
 
-EXPORT_SYMBOL(ps2_init);
-EXPORT_SYMBOL(ps2_sendbyte);
-EXPORT_SYMBOL(ps2_drain);
-EXPORT_SYMBOL(ps2_command);
-EXPORT_SYMBOL(ps2_schedule_command);
-EXPORT_SYMBOL(ps2_handle_ack);
-EXPORT_SYMBOL(ps2_handle_response);
-EXPORT_SYMBOL(ps2_cmd_aborted);
-
 /* Work structure to schedule execution of a command */
 struct ps2work {
 	struct work_struct work;
@@ -71,6 +62,7 @@ int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout)
 
 	return -ps2dev->nak;
 }
+EXPORT_SYMBOL(ps2_sendbyte);
 
 /*
  * ps2_drain() waits for device to transmit requested number of bytes
@@ -96,15 +88,16 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout)
 			   msecs_to_jiffies(timeout));
 	mutex_unlock(&ps2dev->cmd_mutex);
 }
+EXPORT_SYMBOL(ps2_drain);
 
 /*
  * ps2_is_keyboard_id() checks received ID byte against the list of
  * known keyboard IDs.
  */
 
-static inline int ps2_is_keyboard_id(char id_byte)
+int ps2_is_keyboard_id(char id_byte)
 {
-	static char keyboard_ids[] = {
+	const static char keyboard_ids[] = {
 		0xab,	/* Regular keyboards		*/
 		0xac,	/* NCD Sun keyboard		*/
 		0x2b,	/* Trust keyboard, translated	*/
@@ -115,6 +108,7 @@ static inline int ps2_is_keyboard_id(char id_byte)
 
 	return memchr(keyboard_ids, id_byte, sizeof(keyboard_ids)) != NULL;
 }
+EXPORT_SYMBOL(ps2_is_keyboard_id);
 
 /*
  * ps2_adjust_timeout() is called after receiving 1st byte of command
@@ -139,6 +133,19 @@ static int ps2_adjust_timeout(struct ps2dev *ps2dev, int command, int timeout)
 
 		case PS2_CMD_GETID:
 			/*
+			 * Microsoft Natural Elite keyboard responds to
+			 * the GET ID command as it were a mouse, with
+			 * a single byte. Fail the command so atkbd will
+			 * use alternative probe to detect it.
+			 */
+			if (ps2dev->cmdbuf[1] == 0xaa) {
+				serio_pause_rx(ps2dev->serio);
+				ps2dev->flags = 0;
+				serio_continue_rx(ps2dev->serio);
+				timeout = 0;
+			}
+
+			/*
 			 * If device behind the port is not a keyboard there
 			 * won't be 2nd byte of ID response.
 			 */
@@ -237,6 +244,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
 	mutex_unlock(&ps2dev->cmd_mutex);
 	return rc;
 }
+EXPORT_SYMBOL(ps2_command);
 
 /*
  * ps2_execute_scheduled_command() sends a command, previously scheduled by
@@ -279,6 +287,7 @@ int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int comman
 
 	return 0;
 }
+EXPORT_SYMBOL(ps2_schedule_command);
 
 /*
  * ps2_init() initializes ps2dev structure
@@ -290,6 +299,7 @@ void ps2_init(struct ps2dev *ps2dev, struct serio *serio)
 	init_waitqueue_head(&ps2dev->wait);
 	ps2dev->serio = serio;
 }
+EXPORT_SYMBOL(ps2_init);
 
 /*
  * ps2_handle_ack() is supposed to be used in interrupt handler
@@ -335,6 +345,7 @@ int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data)
 
 	return 1;
 }
+EXPORT_SYMBOL(ps2_handle_ack);
 
 /*
  * ps2_handle_response() is supposed to be used in interrupt handler
@@ -360,6 +371,7 @@ int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data)
 
 	return 1;
 }
+EXPORT_SYMBOL(ps2_handle_response);
 
 void ps2_cmd_aborted(struct ps2dev *ps2dev)
 {
@@ -371,4 +383,4 @@ void ps2_cmd_aborted(struct ps2dev *ps2dev)
 
 	ps2dev->flags = 0;
 }
-
+EXPORT_SYMBOL(ps2_cmd_aborted);