4 files changed, 81 insertions, 10 deletions

diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index bfe49243f38..1c9410d1822 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -819,6 +819,7 @@ static const struct parisc_device_id hp_sdc_tbl[] = {
 MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
 
 static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
 
 static struct parisc_driver hp_sdc_driver = {
 	.name =		"hp_sdc",
@@ -930,8 +931,15 @@ static int __init hp_sdc_init(void)
 
 #if defined(__hppa__)
 
+static void request_module_delayed(struct work_struct *work)
+{
+	request_module("hp_sdc_mlc");
+}
+
 static int __init hp_sdc_init_hppa(struct parisc_device *d)
 {
+	int ret;
+
 	if (!d)
 		return 1;
 	if (hp_sdc.dev != NULL)
@@ -944,13 +952,26 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
 	hp_sdc.data_io		= d->hpa.start + 0x800;
 	hp_sdc.status_io	= d->hpa.start + 0x801;
 
-	return hp_sdc_init();
+	INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+	ret = hp_sdc_init();
+	/* after sucessfull initialization give SDC some time to settle
+	 * and then load the hp_sdc_mlc upper layer driver */
+	if (!ret)
+		schedule_delayed_work(&moduleloader_work,
+			msecs_to_jiffies(2000));
+
+	return ret;
 }
 
 #endif /* __hppa__ */
 
 static void hp_sdc_exit(void)
 {
+	/* do nothing if we don't have a SDC */
+	if (!hp_sdc.dev)
+		return;
+
 	write_lock_irq(&hp_sdc.lock);
 
 	/* Turn off all maskable "sub-function" irq's. */
@@ -969,6 +990,7 @@ static void hp_sdc_exit(void)
 	tasklet_kill(&hp_sdc.task);
 
 #if defined(__hppa__)
+	cancel_delayed_work_sync(&moduleloader_work);
 	if (unregister_parisc_driver(&hp_sdc_driver))
 		printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
 #endif
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 83ed2d56b92..fb8a3cd3ffd 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	{ }
 };
 
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
+	{
+		.ident = "LG Electronics X110",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X110"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+		},
+	},
+	{ }
+};
+
 #ifdef CONFIG_PNP
 static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 	{
@@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
 	{ }
 };
 #endif
@@ -698,6 +723,9 @@ static int __init i8042_platform_init(void)
 #endif
 
 #ifdef CONFIG_X86
+	if (dmi_check_system(i8042_dmi_reset_table))
+		i8042_reset = 1;
+
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = 1;
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 170f71ee577..3cffb704e37 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -712,22 +712,43 @@ static int i8042_controller_check(void)
 static int i8042_controller_selftest(void)
 {
 	unsigned char param;
+	int i = 0;
 
 	if (!i8042_reset)
 		return 0;
 
-	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-		return -ENODEV;
-	}
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			return -ENODEV;
+		}
+
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
 
-	if (param != I8042_RET_CTL_TEST) {
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			 param, I8042_RET_CTL_TEST);
-		return -EIO;
-	}
+			param, I8042_RET_CTL_TEST);
+		msleep(50);
+	} while (i++ < 5);
 
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	printk(KERN_INFO
+		"i8042: giving up on controller selftest, continuing anyway...\n");
 	return 0;
+#else
+	return -EIO;
+#endif
 }
 
 /*
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 57953c0eb82..f412c69478a 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
 	spin_lock(&ps2if->lock);
 	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
 	if (ps2if->head == ps2if->tail) {
-		disable_irq(irq);
+		disable_irq_nosync(irq);
 		/* done */
 	} else if (status & PS2STAT_TXE) {
 		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);