diff options
Diffstat (limited to 'drivers/input/tablet/aiptek.c')
| -rw-r--r-- | drivers/input/tablet/aiptek.c | 991 |
1 files changed, 338 insertions, 653 deletions
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index cc0a498763d..94683f58c9e 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -82,8 +82,8 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.5 (May-15-2004)" -#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio" +#define DRIVER_VERSION "v2.3 (May 2, 2007)" +#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen" #define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)" /* @@ -112,7 +112,7 @@ * (returned as Report 3 - absolute coordinates from the mouse) * * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 0 1 0 + * byte0 0 0 0 0 0 0 1 1 * byte1 X7 X6 X5 X4 X3 X2 X1 X0 * byte2 X15 X14 X13 X12 X11 X10 X9 X8 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 @@ -134,7 +134,7 @@ * (returned as Report 5 - macrokeys from the mouse) * * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 1 0 0 + * byte0 0 0 0 0 0 1 0 1 * byte1 0 0 0 BS2 BS Tip IR DV * byte2 0 0 0 0 0 0 1 0 * byte3 0 0 0 K4 K3 K2 K1 K0 @@ -218,15 +218,9 @@ #define AIPTEK_WHEEL_DISABLE (-10101) /* ToolCode values, which BTW are 0x140 .. 0x14f - * We have things set up such that if TOOL_BUTTON_FIRED_BIT is - * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx. - * - * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will - * get reset. + * We have things set up such that if the tool button has changed, + * the tools get reset. */ -#define TOOL_BUTTON(x) ((x) & 0x14f) -#define TOOL_BUTTON_FIRED(x) ((x) & 0x200) -#define TOOL_BUTTON_FIRED_BIT 0x200 /* toolMode codes */ #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN @@ -264,9 +258,9 @@ /* Mouse button programming */ -#define AIPTEK_MOUSE_LEFT_BUTTON 0x01 -#define AIPTEK_MOUSE_RIGHT_BUTTON 0x02 -#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x04 +#define AIPTEK_MOUSE_LEFT_BUTTON 0x04 +#define AIPTEK_MOUSE_RIGHT_BUTTON 0x08 +#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10 /* Stylus button programming */ @@ -294,7 +288,6 @@ struct aiptek_features { int modelCode; /* Tablet model code (not unique) */ int firmwareCode; /* prom/eeprom version */ char usbPath[64 + 1]; /* device's physical usb path */ - char inputPath[64 + 1]; /* input device path */ }; struct aiptek_settings { @@ -327,9 +320,32 @@ struct aiptek { int inDelay; /* jitter: in jitter delay? */ unsigned long endDelay; /* jitter: time when delay ends */ int previousJitterable; /* jitterable prev value */ + + int lastMacro; /* macro key to reset */ + int previousToolMode; /* pen, pencil, brush, etc. tool */ unsigned char *data; /* incoming packet data */ }; +static const int eventTypes[] = { + EV_KEY, EV_ABS, EV_REL, EV_MSC, +}; + +static const int absEvents[] = { + ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y, + ABS_WHEEL, ABS_MISC, +}; + +static const int relEvents[] = { + REL_X, REL_Y, REL_WHEEL, +}; + +static const int buttonEvents[] = { + BTN_LEFT, BTN_RIGHT, BTN_MIDDLE, + BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH, + BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH, + BTN_STYLUS, BTN_STYLUS2, +}; + /* * Permit easy lookup of keyboard events to send, versus * the bitmap which comes from the tablet. This hides the @@ -345,23 +361,39 @@ static const int macroKeyEvents[] = { }; /*********************************************************************** - * Relative reports deliver values in 2's complement format to - * deal with negative offsets. + * Map values to strings and back. Every map shoudl have the following + * as its last element: { NULL, AIPTEK_INVALID_VALUE }. */ -static int aiptek_convert_from_2s_complement(unsigned char c) +#define AIPTEK_INVALID_VALUE -1 + +struct aiptek_map { + const char *string; + int value; +}; + +static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count) { - int ret; - unsigned char b = c; - int negate = 0; + const struct aiptek_map *p; - if ((b & 0x80) != 0) { - b = ~b; - b--; - negate = 1; - } - ret = b; - ret = (negate == 1) ? -ret : ret; - return ret; + if (str[count - 1] == '\n') + count--; + + for (p = map; p->string; p++) + if (!strncmp(str, p->string, count)) + return p->value; + + return AIPTEK_INVALID_VALUE; +} + +static const char *map_val_to_str(const struct aiptek_map *map, int val) +{ + const struct aiptek_map *p; + + for (p = map; p->value != AIPTEK_INVALID_VALUE; p++) + if (val == p->value) + return p->string; + + return "unknown"; } /*********************************************************************** @@ -385,6 +417,9 @@ static int aiptek_convert_from_2s_complement(unsigned char c) * Proximity. Why two events? I thought it interesting to know if the * Proximity event occurred while the tablet was in absolute or relative * mode. + * Update: REL_MISC proved not to be such a good idea. With REL_MISC you + * get an event transmitted each time. ABS_MISC works better, since it + * can be set and re-set. Thus, only using ABS_MISC from now on. * * Other tablets use the notion of a certain minimum stylus pressure * to infer proximity. While that could have been done, that is yet @@ -441,8 +476,8 @@ static void aiptek_irq(struct urb *urb) aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE; } else { - x = aiptek_convert_from_2s_complement(data[2]); - y = aiptek_convert_from_2s_complement(data[3]); + x = (signed char) data[2]; + y = (signed char) data[3]; /* jitterable keeps track of whether any button has been pressed. * We're also using it to remap the physical mouse button mask @@ -451,18 +486,20 @@ static void aiptek_irq(struct urb *urb) * that a non-zero value indicates that one or more * mouse button was pressed.) */ - jitterable = data[5] & 0x07; + jitterable = data[1] & 0x07; - left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; - right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; - middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; + left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0; + right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0; + middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0; input_report_key(inputdev, BTN_LEFT, left); input_report_key(inputdev, BTN_MIDDLE, middle); input_report_key(inputdev, BTN_RIGHT, right); + + input_report_abs(inputdev, ABS_MISC, + 1 | AIPTEK_REPORT_TOOL_UNKNOWN); input_report_rel(inputdev, REL_X, x); input_report_rel(inputdev, REL_Y, y); - input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN); /* Wheel support is in the form of a single-event * firing. @@ -472,6 +509,11 @@ static void aiptek_irq(struct urb *urb) aiptek->curSetting.wheel); aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; } + if (aiptek->lastMacro != -1) { + input_report_key(inputdev, + macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } input_sync(inputdev); } } @@ -489,8 +531,8 @@ static void aiptek_irq(struct urb *urb) y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); z = le16_to_cpu(get_unaligned((__le16 *) (data + 6))); - p = (data[5] & 0x01) != 0 ? 1 : 0; - dv = (data[5] & 0x02) != 0 ? 1 : 0; + dv = (data[5] & 0x01) != 0 ? 1 : 0; + p = (data[5] & 0x02) != 0 ? 1 : 0; tip = (data[5] & 0x04) != 0 ? 1 : 0; /* Use jitterable to re-arrange button masks @@ -505,16 +547,18 @@ static void aiptek_irq(struct urb *urb) * all 'bad' reports... */ if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED - (aiptek->curSetting.toolMode) == 0) { + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), + aiptek->curSetting.toolMode, 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } if (p != 0) { @@ -550,6 +594,11 @@ static void aiptek_irq(struct urb *urb) } } input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS); + if (aiptek->lastMacro != -1) { + input_report_key(inputdev, + macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } input_sync(inputdev); } } @@ -568,23 +617,25 @@ static void aiptek_irq(struct urb *urb) jitterable = data[5] & 0x1c; - p = (data[5] & 0x01) != 0 ? 1 : 0; - dv = (data[5] & 0x02) != 0 ? 1 : 0; + dv = (data[5] & 0x01) != 0 ? 1 : 0; + p = (data[5] & 0x02) != 0 ? 1 : 0; left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED - (aiptek->curSetting.toolMode) == 0) { + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), + aiptek->curSetting.toolMode, 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } if (p != 0) { @@ -605,7 +656,12 @@ static void aiptek_irq(struct urb *urb) aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; } } - input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); + input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); + if (aiptek->lastMacro != -1) { + input_report_key(inputdev, + macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } input_sync(inputdev); } } @@ -615,98 +671,83 @@ static void aiptek_irq(struct urb *urb) else if (data[0] == 4) { jitterable = data[1] & 0x18; - p = (data[1] & 0x01) != 0 ? 1 : 0; - dv = (data[1] & 0x02) != 0 ? 1 : 0; + dv = (data[1] & 0x01) != 0 ? 1 : 0; + p = (data[1] & 0x02) != 0 ? 1 : 0; tip = (data[1] & 0x04) != 0 ? 1 : 0; bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; - macro = data[3]; + macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1; z = le16_to_cpu(get_unaligned((__le16 *) (data + 4))); - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + if (dv) { + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), + aiptek->curSetting.toolMode, 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } + } - if (p != 0) { - input_report_key(inputdev, BTN_TOUCH, tip); - input_report_key(inputdev, BTN_STYLUS, bs); - input_report_key(inputdev, BTN_STYLUS2, pck); - input_report_abs(inputdev, ABS_PRESSURE, z); - } + if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) { + input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } - /* For safety, we're sending key 'break' codes for the - * neighboring macro keys. - */ - if (macro > 0) { - input_report_key(inputdev, - macroKeyEvents[macro - 1], 0); - } - if (macro < 25) { - input_report_key(inputdev, - macroKeyEvents[macro + 1], 0); - } - input_report_key(inputdev, macroKeyEvents[macro], p); - input_report_abs(inputdev, ABS_MISC, - p | AIPTEK_REPORT_TOOL_STYLUS); - input_sync(inputdev); + if (macro != -1 && macro != aiptek->lastMacro) { + input_report_key(inputdev, macroKeyEvents[macro], 1); + aiptek->lastMacro = macro; } + input_report_abs(inputdev, ABS_MISC, + p | AIPTEK_REPORT_TOOL_STYLUS); + input_sync(inputdev); } /* Report 5s come from the macro keys when pressed by mouse */ else if (data[0] == 5) { jitterable = data[1] & 0x1c; - p = (data[1] & 0x01) != 0 ? 1 : 0; - dv = (data[1] & 0x02) != 0 ? 1 : 0; + dv = (data[1] & 0x01) != 0 ? 1 : 0; + p = (data[1] & 0x02) != 0 ? 1 : 0; left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; - macro = data[3]; + macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0; - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + if (dv) { + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), - 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - if (p != 0) { - input_report_key(inputdev, BTN_LEFT, left); - input_report_key(inputdev, BTN_MIDDLE, middle); - input_report_key(inputdev, BTN_RIGHT, right); + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); + input_report_key(inputdev, + aiptek->curSetting.toolMode, 1); + aiptek->previousToolMode = aiptek->curSetting.toolMode; } + } - /* For safety, we're sending key 'break' codes for the - * neighboring macro keys. - */ - if (macro > 0) { - input_report_key(inputdev, - macroKeyEvents[macro - 1], 0); - } - if (macro < 25) { - input_report_key(inputdev, - macroKeyEvents[macro + 1], 0); - } + if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) { + input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } + if (macro != -1 && macro != aiptek->lastMacro) { input_report_key(inputdev, macroKeyEvents[macro], 1); - input_report_rel(inputdev, ABS_MISC, - p | AIPTEK_REPORT_TOOL_MOUSE); - input_sync(inputdev); + aiptek->lastMacro = macro; } + + input_report_abs(inputdev, ABS_MISC, + p | AIPTEK_REPORT_TOOL_MOUSE); + input_sync(inputdev); } /* We have no idea which tool can generate a report 6. Theoretically, * neither need to, having been given reports 4 & 5 for such use. @@ -725,15 +766,18 @@ static void aiptek_irq(struct urb *urb) 0); } - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + /* If the selected tool changed, reset the old + tool key, and set the new one. + */ + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting. - toolMode), 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->curSetting.toolMode, + 1); + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } input_report_key(inputdev, macroKeyEvents[macro], 1); @@ -1007,9 +1051,6 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%dx%d\n", aiptek->inputdev->absmax[ABS_X] + 1, aiptek->inputdev->absmax[ABS_Y] + 1); @@ -1024,117 +1065,35 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL); /*********************************************************************** - * support routines for the 'product_id' file - */ -static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", - aiptek->inputdev->id.product); -} - -static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); - -/*********************************************************************** - * support routines for the 'vendor_id' file - */ -static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); -} - -static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); - -/*********************************************************************** - * support routines for the 'vendor' file - */ -static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int retval; - - if (aiptek == NULL) - return 0; - - retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer); - return retval; -} - -static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL); - -/*********************************************************************** - * support routines for the 'product' file - */ -static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int retval; - - if (aiptek == NULL) - return 0; - - retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product); - return retval; -} - -static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL); - -/*********************************************************************** * support routines for the 'pointer_mode' file. Note that this file * both displays current setting and allows reprogramming. */ +static struct aiptek_map pointer_mode_map[] = { + { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE }, + { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE }, + { "either", AIPTEK_POINTER_EITHER_MODE }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.pointerMode) { - case AIPTEK_POINTER_ONLY_STYLUS_MODE: - s = "stylus"; - break; - - case AIPTEK_POINTER_ONLY_MOUSE_MODE: - s = "mouse"; - break; - - case AIPTEK_POINTER_EITHER_MODE: - s = "either"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(pointer_mode_map, + aiptek->curSetting.pointerMode)); } static ssize_t store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; + int new_mode = map_str_to_val(pointer_mode_map, buf, count); - if (strcmp(buf, "stylus") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_POINTER_ONLY_STYLUS_MODE; - } else if (strcmp(buf, "mouse") == 0) { - aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE; - } else if (strcmp(buf, "either") == 0) { - aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; - } + if (new_mode == AIPTEK_INVALID_VALUE) + return -EINVAL; + + aiptek->newSetting.pointerMode = new_mode; return count; } @@ -1146,44 +1105,32 @@ static DEVICE_ATTR(pointer_mode, * support routines for the 'coordinate_mode' file. Note that this file * both displays current setting and allows reprogramming. */ + +static struct aiptek_map coordinate_mode_map[] = { + { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE }, + { "relative", AIPTEK_COORDINATE_RELATIVE_MODE }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.coordinateMode) { - case AIPTEK_COORDINATE_ABSOLUTE_MODE: - s = "absolute"; - break; - - case AIPTEK_COORDINATE_RELATIVE_MODE: - s = "relative"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(coordinate_mode_map, + aiptek->curSetting.coordinateMode)); } static ssize_t store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; + int new_mode = map_str_to_val(coordinate_mode_map, buf, count); - if (strcmp(buf, "absolute") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_COORDINATE_ABSOLUTE_MODE; - } else if (strcmp(buf, "relative") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_COORDINATE_RELATIVE_MODE; - } + if (new_mode == AIPTEK_INVALID_VALUE) + return -EINVAL; + + aiptek->newSetting.coordinateMode = new_mode; return count; } @@ -1195,73 +1142,37 @@ static DEVICE_ATTR(coordinate_mode, * support routines for the 'tool_mode' file. Note that this file * both displays current setting and allows reprogramming. */ + +static struct aiptek_map tool_mode_map[] = { + { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE }, + { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE }, + { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE }, + { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE }, + { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE }, + { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE }, + { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) { - case AIPTEK_TOOL_BUTTON_MOUSE_MODE: - s = "mouse"; - break; - - case AIPTEK_TOOL_BUTTON_ERASER_MODE: - s = "eraser"; - break; - - case AIPTEK_TOOL_BUTTON_PENCIL_MODE: - s = "pencil"; - break; - - case AIPTEK_TOOL_BUTTON_PEN_MODE: - s = "pen"; - break; - - case AIPTEK_TOOL_BUTTON_BRUSH_MODE: - s = "brush"; - break; - - case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE: - s = "airbrush"; - break; - - case AIPTEK_TOOL_BUTTON_LENS_MODE: - s = "lens"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(tool_mode_map, + aiptek->curSetting.toolMode)); } static ssize_t store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; + int new_mode = map_str_to_val(tool_mode_map, buf, count); - if (strcmp(buf, "mouse") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE; - } else if (strcmp(buf, "eraser") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE; - } else if (strcmp(buf, "pencil") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE; - } else if (strcmp(buf, "pen") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; - } else if (strcmp(buf, "brush") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE; - } else if (strcmp(buf, "airbrush") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE; - } else if (strcmp(buf, "lens") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE; - } + if (new_mode == AIPTEK_INVALID_VALUE) + return -EINVAL; + aiptek->newSetting.toolMode = new_mode; return count; } @@ -1277,9 +1188,6 @@ static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *att { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) { return snprintf(buf, PAGE_SIZE, "disable\n"); } else { @@ -1294,9 +1202,6 @@ store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char struct aiptek *aiptek = dev_get_drvdata(dev); int x; - if (aiptek == NULL) - return 0; - if (strcmp(buf, "disable") == 0) { aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE; } else { @@ -1319,9 +1224,6 @@ static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *att { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) { return snprintf(buf, PAGE_SIZE, "disable\n"); } else { @@ -1336,9 +1238,6 @@ store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char struct aiptek *aiptek = dev_get_drvdata(dev); int y; - if (aiptek == NULL) - return 0; - if (strcmp(buf, "disable") == 0) { aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE; } else { @@ -1361,9 +1260,6 @@ static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribut { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay); } @@ -1372,9 +1268,6 @@ store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10); return count; } @@ -1391,9 +1284,6 @@ static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_at { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.programmableDelay); } @@ -1403,9 +1293,6 @@ store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10); return count; } @@ -1415,23 +1302,6 @@ static DEVICE_ATTR(delay, show_tabletProgrammableDelay, store_tabletProgrammableDelay); /*********************************************************************** - * support routines for the 'input_path' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n", - aiptek->features.inputPath); -} - -static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL); - -/*********************************************************************** * support routines for the 'event_count' file. Note that this file * only displays current setting. */ @@ -1439,9 +1309,6 @@ static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attri { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); } @@ -1456,9 +1323,6 @@ static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_at struct aiptek *aiptek = dev_get_drvdata(dev); char *retMsg; - if (aiptek == NULL) - return 0; - switch (aiptek->diagnostic) { case AIPTEK_DIAGNOSTIC_NA: retMsg = "no errors\n"; @@ -1493,45 +1357,32 @@ static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL); * support routines for the 'stylus_upper' file. Note that this file * both displays current setting and allows for setting changing. */ + +static struct aiptek_map stylus_button_map[] = { + { "upper", AIPTEK_STYLUS_UPPER_BUTTON }, + { "lower", AIPTEK_STYLUS_LOWER_BUTTON }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.stylusButtonUpper) { - case AIPTEK_STYLUS_UPPER_BUTTON: - s = "upper"; - break; - - case AIPTEK_STYLUS_LOWER_BUTTON: - s = "lower"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(stylus_button_map, + aiptek->curSetting.stylusButtonUpper)); } static ssize_t store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(stylus_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "upper") == 0) { - aiptek->newSetting.stylusButtonUpper = - AIPTEK_STYLUS_UPPER_BUTTON; - } else if (strcmp(buf, "lower") == 0) { - aiptek->newSetting.stylusButtonUpper = - AIPTEK_STYLUS_LOWER_BUTTON; - } + aiptek->newSetting.stylusButtonUpper = new_button; return count; } @@ -1543,45 +1394,26 @@ static DEVICE_ATTR(stylus_upper, * support routines for the 'stylus_lower' file. Note that this file * both displays current setting and allows for setting changing. */ + static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.stylusButtonLower) { - case AIPTEK_STYLUS_UPPER_BUTTON: - s = "upper"; - break; - - case AIPTEK_STYLUS_LOWER_BUTTON: - s = "lower"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(stylus_button_map, + aiptek->curSetting.stylusButtonLower)); } static ssize_t store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(stylus_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "upper") == 0) { - aiptek->newSetting.stylusButtonLower = - AIPTEK_STYLUS_UPPER_BUTTON; - } else if (strcmp(buf, "lower") == 0) { - aiptek->newSetting.stylusButtonLower = - AIPTEK_STYLUS_LOWER_BUTTON; - } + aiptek->newSetting.stylusButtonLower = new_button; return count; } @@ -1593,49 +1425,33 @@ static DEVICE_ATTR(stylus_lower, * support routines for the 'mouse_left' file. Note that this file * both displays current setting and allows for setting changing. */ + +static struct aiptek_map mouse_button_map[] = { + { "left", AIPTEK_MOUSE_LEFT_BUTTON }, + { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON }, + { "right", AIPTEK_MOUSE_RIGHT_BUTTON }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonLeft) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(mouse_button_map, + aiptek->curSetting.mouseButtonLeft)); } static ssize_t store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(mouse_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON; - } + aiptek->newSetting.mouseButtonLeft = new_button; return count; } @@ -1650,48 +1466,22 @@ static DEVICE_ATTR(mouse_left, static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonMiddle) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(mouse_button_map, + aiptek->curSetting.mouseButtonMiddle)); } static ssize_t store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(mouse_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonMiddle = - AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonMiddle = - AIPTEK_MOUSE_RIGHT_BUTTON; - } + aiptek->newSetting.mouseButtonMiddle = new_button; return count; } @@ -1706,47 +1496,22 @@ static DEVICE_ATTR(mouse_middle, static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonRight) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(mouse_button_map, + aiptek->curSetting.mouseButtonRight)); } static ssize_t store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(mouse_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonRight = - AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; - } + aiptek->newSetting.mouseButtonRight = new_button; return count; } @@ -1762,9 +1527,6 @@ static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *att { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) { return snprintf(buf, PAGE_SIZE, "disable\n"); } else { @@ -1778,9 +1540,6 @@ store_tabletWheel(struct device *dev, struct device_attribute *attr, const char { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10); return count; } @@ -1794,11 +1553,6 @@ static DEVICE_ATTR(wheel, */ static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf) { - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - /* There is nothing useful to display, so a one-line manual * is in order... */ @@ -1811,9 +1565,6 @@ store_tabletExecute(struct device *dev, struct device_attribute *attr, const cha { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - /* We do not care what you write to this file. Merely the action * of writing to this file triggers a tablet reprogramming. */ @@ -1837,9 +1588,6 @@ static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *a { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode); } @@ -1853,9 +1601,6 @@ static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode); } @@ -1869,86 +1614,39 @@ static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *at { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%04x\n", aiptek->features.firmwareCode); } static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL); -/*********************************************************************** - * This routine removes all existing sysfs files managed by this device - * driver. - */ -static void aiptek_delete_files(struct device *dev) -{ - device_remove_file(dev, &dev_attr_size); - device_remove_file(dev, &dev_attr_product_id); - device_remove_file(dev, &dev_attr_vendor_id); - device_remove_file(dev, &dev_attr_vendor); - device_remove_file(dev, &dev_attr_product); - device_remove_file(dev, &dev_attr_pointer_mode); - device_remove_file(dev, &dev_attr_coordinate_mode); - device_remove_file(dev, &dev_attr_tool_mode); - device_remove_file(dev, &dev_attr_xtilt); - device_remove_file(dev, &dev_attr_ytilt); - device_remove_file(dev, &dev_attr_jitter); - device_remove_file(dev, &dev_attr_delay); - device_remove_file(dev, &dev_attr_input_path); - device_remove_file(dev, &dev_attr_event_count); - device_remove_file(dev, &dev_attr_diagnostic); - device_remove_file(dev, &dev_attr_odm_code); - device_remove_file(dev, &dev_attr_model_code); - device_remove_file(dev, &dev_attr_firmware_code); - device_remove_file(dev, &dev_attr_stylus_lower); - device_remove_file(dev, &dev_attr_stylus_upper); - device_remove_file(dev, &dev_attr_mouse_left); - device_remove_file(dev, &dev_attr_mouse_middle); - device_remove_file(dev, &dev_attr_mouse_right); - device_remove_file(dev, &dev_attr_wheel); - device_remove_file(dev, &dev_attr_execute); -} - -/*********************************************************************** - * This routine creates the sysfs files managed by this device - * driver. - */ -static int aiptek_add_files(struct device *dev) -{ - int ret; +static struct attribute *aiptek_attributes[] = { + &dev_attr_size.attr, + &dev_attr_pointer_mode.attr, + &dev_attr_coordinate_mode.attr, + &dev_attr_tool_mode.attr, + &dev_attr_xtilt.attr, + &dev_attr_ytilt.attr, + &dev_attr_jitter.attr, + &dev_attr_delay.attr, + &dev_attr_event_count.attr, + &dev_attr_diagnostic.attr, + &dev_attr_odm_code.attr, + &dev_attr_model_code.attr, + &dev_attr_firmware_code.attr, + &dev_attr_stylus_lower.attr, + &dev_attr_stylus_upper.attr, + &dev_attr_mouse_left.attr, + &dev_attr_mouse_middle.attr, + &dev_attr_mouse_right.attr, + &dev_attr_wheel.attr, + &dev_attr_execute.attr, + NULL +}; - if ((ret = device_create_file(dev, &dev_attr_size)) || - (ret = device_create_file(dev, &dev_attr_product_id)) || - (ret = device_create_file(dev, &dev_attr_vendor_id)) || - (ret = device_create_file(dev, &dev_attr_vendor)) || - (ret = device_create_file(dev, &dev_attr_product)) || - (ret = device_create_file(dev, &dev_attr_pointer_mode)) || - (ret = device_create_file(dev, &dev_attr_coordinate_mode)) || - (ret = device_create_file(dev, &dev_attr_tool_mode)) || - (ret = device_create_file(dev, &dev_attr_xtilt)) || - (ret = device_create_file(dev, &dev_attr_ytilt)) || - (ret = device_create_file(dev, &dev_attr_jitter)) || - (ret = device_create_file(dev, &dev_attr_delay)) || - (ret = device_create_file(dev, &dev_attr_input_path)) || - (ret = device_create_file(dev, &dev_attr_event_count)) || - (ret = device_create_file(dev, &dev_attr_diagnostic)) || - (ret = device_create_file(dev, &dev_attr_odm_code)) || - (ret = device_create_file(dev, &dev_attr_model_code)) || - (ret = device_create_file(dev, &dev_attr_firmware_code)) || - (ret = device_create_file(dev, &dev_attr_stylus_lower)) || - (ret = device_create_file(dev, &dev_attr_stylus_upper)) || - (ret = device_create_file(dev, &dev_attr_mouse_left)) || - (ret = device_create_file(dev, &dev_attr_mouse_middle)) || - (ret = device_create_file(dev, &dev_attr_mouse_right)) || - (ret = device_create_file(dev, &dev_attr_wheel)) || - (ret = device_create_file(dev, &dev_attr_execute))) { - err("aiptek: killing own sysfs device files\n"); - aiptek_delete_files(dev); - } - return ret; -} +static struct attribute_group aiptek_attribute_group = { + .attrs = aiptek_attributes, +}; /*********************************************************************** * This routine is called when a tablet has been identified. It basically @@ -1961,8 +1659,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_endpoint_descriptor *endpoint; struct aiptek *aiptek; struct input_dev *inputdev; - struct input_handle *inputhandle; - struct list_head *node, *next; int i; int speeds[] = { 0, AIPTEK_PROGRAMMABLE_DELAY_50, @@ -1984,17 +1680,23 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); inputdev = input_allocate_device(); - if (!aiptek || !inputdev) + if (!aiptek || !inputdev) { + warn("aiptek: cannot allocate memory or input device"); goto fail1; + } aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, GFP_ATOMIC, &aiptek->data_dma); - if (!aiptek->data) + if (!aiptek->data) { + warn("aiptek: cannot allocate usb buffer"); goto fail1; + } aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!aiptek->urb) + if (!aiptek->urb) { + warn("aiptek: cannot allocate urb"); goto fail2; + } aiptek->inputdev = inputdev; aiptek->usbdev = usbdev; @@ -2002,6 +1704,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek->inDelay = 0; aiptek->endDelay = 0; aiptek->previousJitterable = 0; + aiptek->lastMacro = -1; /* Set up the curSettings struct. Said struct contains the current * programmable parameters. The newSetting struct contains changes @@ -2054,36 +1757,23 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Now program the capacities of the tablet, in terms of being * an input device. */ - inputdev->evbit[0] |= BIT(EV_KEY) - | BIT(EV_ABS) - | BIT(EV_REL) - | BIT(EV_MSC); - - inputdev->absbit[0] |= BIT(ABS_MISC); + for (i = 0; i < ARRAY_SIZE(eventTypes); ++i) + __set_bit(eventTypes[i], inputdev->evbit); - inputdev->relbit[0] |= - (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); + for (i = 0; i < ARRAY_SIZE(absEvents); ++i) + __set_bit(absEvents[i], inputdev->absbit); - inputdev->keybit[LONG(BTN_LEFT)] |= - (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); + for (i = 0; i < ARRAY_SIZE(relEvents); ++i) + __set_bit(relEvents[i], inputdev->relbit); - inputdev->keybit[LONG(BTN_DIGI)] |= - (BIT(BTN_TOOL_PEN) | - BIT(BTN_TOOL_RUBBER) | - BIT(BTN_TOOL_PENCIL) | - BIT(BTN_TOOL_AIRBRUSH) | - BIT(BTN_TOOL_BRUSH) | - BIT(BTN_TOOL_MOUSE) | - BIT(BTN_TOOL_LENS) | - BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); + __set_bit(MSC_SERIAL, inputdev->mscbit); - inputdev->mscbit[0] = BIT(MSC_SERIAL); + /* Set up key and button codes */ + for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i) + __set_bit(buttonEvents[i], inputdev->keybit); - /* Programming the tablet macro keys needs to be done with a for loop - * as the keycodes are discontiguous. - */ for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) - set_bit(macroKeyEvents[i], inputdev->keybit); + __set_bit(macroKeyEvents[i], inputdev->keybit); /* * Program the input device coordinate capacities. We do not yet @@ -2134,25 +1824,11 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) } } - /* Register the tablet as an Input Device - */ - err = input_register_device(aiptek->inputdev); - if (err) + /* Murphy says that some day someone will have a tablet that fails the + above test. That's you, Frederic Rodrigo */ + if (i == ARRAY_SIZE(speeds)) { + info("input: Aiptek tried all speeds, no sane response"); goto fail2; - - /* We now will look for the evdev device which is mapped to - * the tablet. The partial name is kept in the link list of - * input_handles associated with this input device. - * What identifies an evdev input_handler is that it begins - * with 'event', continues with a digit, and that in turn - * is mapped to input/eventN. - */ - list_for_each_safe(node, next, &inputdev->h_list) { - inputhandle = to_handle(node); - if (strncmp(inputhandle->name, "event", 5) == 0) { - strcpy(aiptek->features.inputPath, inputhandle->name); - break; - } } /* Associate this driver's struct with the usb interface. @@ -2161,18 +1837,27 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Set up the sysfs files */ - aiptek_add_files(&intf->dev); + err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group); + if (err) { + warn("aiptek: cannot create sysfs group err: %d", err); + goto fail3; + } - /* Make sure the evdev module is loaded. Assuming evdev IS a module :-) + /* Register the tablet as an Input Device */ - if (request_module("evdev") != 0) - info("aiptek: error loading 'evdev' module"); - + err = input_register_device(aiptek->inputdev); + if (err) { + warn("aiptek: input_register_device returned err: %d", err); + goto fail4; + } return 0; + fail4: sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group); + fail3: usb_free_urb(aiptek->urb); fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, aiptek->data_dma); - fail1: input_free_device(inputdev); + fail1: usb_set_intfdata(intf, NULL); + input_free_device(inputdev); kfree(aiptek); return err; } @@ -2192,7 +1877,7 @@ static void aiptek_disconnect(struct usb_interface *intf) */ usb_kill_urb(aiptek->urb); input_unregister_device(aiptek->inputdev); - aiptek_delete_files(&intf->dev); + sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group); usb_free_urb(aiptek->urb); usb_buffer_free(interface_to_usbdev(intf), AIPTEK_PACKET_LENGTH, |