10 files changed, 303 insertions, 449 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 8a8fa4d2d6a..b9f58ca82fd 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -99,22 +99,6 @@ config TOUCHSCREEN_BITSY
 	  To compile this driver as a module, choose M here: the
 	  module will be called h3600_ts_input.
 
-config TOUCHSCREEN_CORGI
-	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
-	depends on PXA_SHARPSL
-	select CORGI_SSP_DEPRECATED
-	help
-	  Say Y here to enable the driver for the touchscreen on the
-	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.
-
-	  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called corgi_ts.
-
-	  NOTE: this driver is deprecated, try enable SPI and generic
-	  ADS7846-based touchscreen driver.
-
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
@@ -135,6 +119,18 @@ config TOUCHSCREEN_DYNAPRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called dynapro.
 
+config TOUCHSCREEN_HAMPSHIRE
+	tristate "Hampshire serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Hampshire serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hampshire.
+
 config TOUCHSCREEN_EETI
 	tristate "EETI touchscreen panel support"
 	depends on I2C
@@ -158,8 +154,8 @@ config TOUCHSCREEN_FUJITSU
 	  module will be called fujitsu-ts.
 
 config TOUCHSCREEN_S3C2410
-	tristate "Samsung S3C2410 touchscreen input driver"
-	depends on ARCH_S3C2410
+	tristate "Samsung S3C2410/generic touchscreen input driver"
+	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
 	select S3C24XX_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7fef7d5cca2..8ad36eef90a 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,8 +12,8 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
+obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index e019d53d1ab..0d2d7e54b46 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -156,9 +156,14 @@ struct ser_req {
 	u16			reset;
 	u16			ref_on;
 	u16			command;
-	u16			sample;
 	struct spi_message	msg;
 	struct spi_transfer	xfer[6];
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u16 sample ____cacheline_aligned;
 };
 
 struct ad7877 {
@@ -182,8 +187,6 @@ struct ad7877 {
 	u8			averaging;
 	u8			pen_down_acc_interval;
 
-	u16			conversion_data[AD7877_NR_SENSE];
-
 	struct spi_transfer	xfer[AD7877_NR_SENSE + 2];
 	struct spi_message	msg;
 
@@ -195,6 +198,12 @@ struct ad7877 {
 	spinlock_t		lock;
 	struct timer_list	timer;		/* P: lock */
 	unsigned		pending:1;	/* P: lock */
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned;
 };
 
 static int gpio3;
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
deleted file mode 100644
index 94a1919d439..00000000000
--- a/drivers/input/touchscreen/corgi_ts.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models
- *
- *  Copyright (c) 2004-2005 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-
-#include <mach/sharpsl.h>
-#include <mach/hardware.h>
-#include <mach/pxa2xx-gpio.h>
-
-
-#define PWR_MODE_ACTIVE		0
-#define PWR_MODE_SUSPEND	1
-
-#define X_AXIS_MAX		3830
-#define X_AXIS_MIN		150
-#define Y_AXIS_MAX		3830
-#define Y_AXIS_MIN		190
-#define PRESSURE_MIN		0
-#define PRESSURE_MAX		15000
-
-struct ts_event {
-	short pressure;
-	short x;
-	short y;
-};
-
-struct corgi_ts {
-	struct input_dev *input;
-	struct timer_list timer;
-	struct ts_event tc;
-	int pendown;
-	int power_mode;
-	int irq_gpio;
-	struct corgits_machinfo *machinfo;
-};
-
-#ifdef CONFIG_PXA25x
-#define CCNT(a)		asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a))
-#define PMNC_GET(x)	asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x))
-#define PMNC_SET(x)	asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x))
-#endif
-#ifdef CONFIG_PXA27x
-#define CCNT(a)		asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a))
-#define PMNC_GET(x)	asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x))
-#define PMNC_SET(x)	asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x))
-#endif
-
-/* ADS7846 Touch Screen Controller bit definitions */
-#define ADSCTRL_PD0		(1u << 0)	/* PD0 */
-#define ADSCTRL_PD1		(1u << 1)	/* PD1 */
-#define ADSCTRL_DFR		(1u << 2)	/* SER/DFR */
-#define ADSCTRL_MOD		(1u << 3)	/* Mode */
-#define ADSCTRL_ADR_SH	4	/* Address setting */
-#define ADSCTRL_STS		(1u << 7)	/* Start Bit */
-
-/* External Functions */
-extern unsigned int get_clk_frequency_khz(int info);
-
-static unsigned long calc_waittime(struct corgi_ts *corgi_ts)
-{
-	unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod();
-
-	if (hsync_invperiod)
-		return get_clk_frequency_khz(0)*1000/hsync_invperiod;
-	else
-		return 0;
-}
-
-static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend,
-		unsigned int address, unsigned long wait_time)
-{
-	unsigned long timer1 = 0, timer2, pmnc = 0;
-	int pos = 0;
-
-	if (wait_time && doSend) {
-		PMNC_GET(pmnc);
-		if (!(pmnc & 0x01))
-			PMNC_SET(0x01);
-
-		/* polling HSync */
-		corgi_ts->machinfo->wait_hsync();
-		/* get CCNT */
-		CCNT(timer1);
-	}
-
-	if (doRecive)
-		pos = corgi_ssp_ads7846_get();
-
-	if (doSend) {
-		int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | (address << ADSCTRL_ADR_SH) | ADSCTRL_STS;
-		/* dummy command */
-		corgi_ssp_ads7846_put(cmd);
-		corgi_ssp_ads7846_get();
-
-		if (wait_time) {
-			/* Wait after HSync */
-			CCNT(timer2);
-			if (timer2-timer1 > wait_time) {
-				/* too slow - timeout, try again */
-				corgi_ts->machinfo->wait_hsync();
-				/* get CCNT */
-				CCNT(timer1);
-				/* Wait after HSync */
-				CCNT(timer2);
-			}
-			while (timer2 - timer1 < wait_time)
-				CCNT(timer2);
-		}
-		corgi_ssp_ads7846_put(cmd);
-		if (wait_time && !(pmnc & 0x01))
-			PMNC_SET(pmnc);
-	}
-	return pos;
-}
-
-static int read_xydata(struct corgi_ts *corgi_ts)
-{
-	unsigned int x, y, z1, z2;
-	unsigned long flags, wait_time;
-
-	/* critical section */
-	local_irq_save(flags);
-	corgi_ssp_ads7846_lock();
-	wait_time = calc_waittime(corgi_ts);
-
-	/* Y-axis */
-	sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time);
-
-	/* Y-axis */
-	sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time);
-
-	/* X-axis */
-	y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time);
-
-	/* Z1 */
-	x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time);
-
-	/* Z2 */
-	z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time);
-	z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time);
-
-	/* Power-Down Enable */
-	corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-	corgi_ssp_ads7846_get();
-
-	corgi_ssp_ads7846_unlock();
-	local_irq_restore(flags);
-
-	if (x== 0 || y == 0 || z1 == 0 || (x * (z2 - z1) / z1) >= 15000) {
-		corgi_ts->tc.pressure = 0;
-		return 0;
-	}
-
-	corgi_ts->tc.x = x;
-	corgi_ts->tc.y = y;
-	corgi_ts->tc.pressure = (x * (z2 - z1)) / z1;
-	return 1;
-}
-
-static void new_data(struct corgi_ts *corgi_ts)
-{
-	struct input_dev *dev = corgi_ts->input;
-
-	if (corgi_ts->power_mode != PWR_MODE_ACTIVE)
-		return;
-
-	if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0)
-		return;
-
-	input_report_abs(dev, ABS_X, corgi_ts->tc.x);
-	input_report_abs(dev, ABS_Y, corgi_ts->tc.y);
-	input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure);
-	input_report_key(dev, BTN_TOUCH, corgi_ts->pendown);
-	input_sync(dev);
-}
-
-static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
-{
-	if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) {
-		/* Disable Interrupt */
-		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE);
-		if (read_xydata(corgi_ts)) {
-			corgi_ts->pendown = 1;
-			new_data(corgi_ts);
-		}
-		mod_timer(&corgi_ts->timer, jiffies + HZ / 100);
-	} else {
-		if (corgi_ts->pendown == 1 || corgi_ts->pendown == 2) {
-			mod_timer(&corgi_ts->timer, jiffies + HZ / 100);
-			corgi_ts->pendown++;
-			return;
-		}
-
-		if (corgi_ts->pendown) {
-			corgi_ts->tc.pressure = 0;
-			new_data(corgi_ts);
-		}
-
-		/* Enable Falling Edge */
-		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
-		corgi_ts->pendown = 0;
-	}
-}
-
-static void corgi_ts_timer(unsigned long data)
-{
-	struct corgi_ts *corgits_data = (struct corgi_ts *) data;
-
-	ts_interrupt_main(corgits_data, 1);
-}
-
-static irqreturn_t ts_interrupt(int irq, void *dev_id)
-{
-	struct corgi_ts *corgits_data = dev_id;
-
-	ts_interrupt_main(corgits_data, 0);
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_PM
-static int corgits_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct corgi_ts *corgi_ts = platform_get_drvdata(dev);
-
-	if (corgi_ts->pendown) {
-		del_timer_sync(&corgi_ts->timer);
-		corgi_ts->tc.pressure = 0;
-		new_data(corgi_ts);
-		corgi_ts->pendown = 0;
-	}
-	corgi_ts->power_mode = PWR_MODE_SUSPEND;
-
-	corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-
-	return 0;
-}
-
-static int corgits_resume(struct platform_device *dev)
-{
-	struct corgi_ts *corgi_ts = platform_get_drvdata(dev);
-
-	corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
-	corgi_ts->power_mode = PWR_MODE_ACTIVE;
-
-	return 0;
-}
-#else
-#define corgits_suspend		NULL
-#define corgits_resume		NULL
-#endif
-
-static int __devinit corgits_probe(struct platform_device *pdev)
-{
-	struct corgi_ts *corgi_ts;
-	struct input_dev *input_dev;
-	int err = -ENOMEM;
-
-	corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!corgi_ts || !input_dev)
-		goto fail1;
-
-	platform_set_drvdata(pdev, corgi_ts);
-
-	corgi_ts->machinfo = pdev->dev.platform_data;
-	corgi_ts->irq_gpio = platform_get_irq(pdev, 0);
-
-	if (corgi_ts->irq_gpio < 0) {
-		err = -ENODEV;
-		goto fail1;
-	}
-
-	corgi_ts->input = input_dev;
-
-	init_timer(&corgi_ts->timer);
-	corgi_ts->timer.data = (unsigned long) corgi_ts;
-	corgi_ts->timer.function = corgi_ts_timer;
-
-	input_dev->name = "Corgi Touchscreen";
-	input_dev->phys = "corgits/input0";
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor = 0x0001;
-	input_dev->id.product = 0x0002;
-	input_dev->id.version = 0x0100;
-	input_dev->dev.parent = &pdev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-	input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0);
-
-	pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN);
-
-	/* Initiaize ADS7846 Difference Reference mode */
-	corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-	mdelay(5);
-	corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-	mdelay(5);
-	corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-	mdelay(5);
-	corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
-	mdelay(5);
-
-	if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) {
-		err = -EBUSY;
-		goto fail1;
-	}
-
-	err = input_register_device(corgi_ts->input);
-	if (err)
-		goto fail2;
-
-	corgi_ts->power_mode = PWR_MODE_ACTIVE;
-
-	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
-
-	return 0;
-
- fail2:	free_irq(corgi_ts->irq_gpio, corgi_ts);
- fail1:	input_free_device(input_dev);
-	kfree(corgi_ts);
-	return err;
-}
-
-static int __devexit corgits_remove(struct platform_device *pdev)
-{
-	struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
-
-	free_irq(corgi_ts->irq_gpio, corgi_ts);
-	del_timer_sync(&corgi_ts->timer);
-	corgi_ts->machinfo->put_hsync();
-	input_unregister_device(corgi_ts->input);
-	kfree(corgi_ts);
-
-	return 0;
-}
-
-static struct platform_driver corgits_driver = {
-	.probe		= corgits_probe,
-	.remove		= __devexit_p(corgits_remove),
-	.suspend	= corgits_suspend,
-	.resume		= corgits_resume,
-	.driver		= {
-		.name	= "corgi-ts",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init corgits_init(void)
-{
-	return platform_driver_register(&corgits_driver);
-}
-
-static void __exit corgits_exit(void)
-{
-	platform_driver_unregister(&corgits_driver);
-}
-
-module_init(corgits_init);
-module_exit(corgits_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
-MODULE_DESCRIPTION("Corgi TouchScreen Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:corgi-ts");
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 204b8a1a601..75f8b73010f 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -124,14 +124,25 @@ static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int eeti_ts_open(struct input_dev *dev)
+static void eeti_ts_start(struct eeti_ts_priv *priv)
 {
-	struct eeti_ts_priv *priv = input_get_drvdata(dev);
-
 	enable_irq(priv->irq);
 
 	/* Read the events once to arm the IRQ */
 	eeti_ts_read(&priv->work);
+}
+
+static void eeti_ts_stop(struct eeti_ts_priv *priv)
+{
+	disable_irq(priv->irq);
+	cancel_work_sync(&priv->work);
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+	struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+	eeti_ts_start(priv);
 
 	return 0;
 }
@@ -140,8 +151,7 @@ static void eeti_ts_close(struct input_dev *dev)
 {
 	struct eeti_ts_priv *priv = input_get_drvdata(dev);
 
-	disable_irq(priv->irq);
-	cancel_work_sync(&priv->work);
+	eeti_ts_stop(priv);
 }
 
 static int __devinit eeti_ts_probe(struct i2c_client *client,
@@ -153,10 +163,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
 	unsigned int irq_flags;
 	int err = -ENOMEM;
 
-	/* In contrast to what's described in the datasheet, there seems
+	/*
+	 * In contrast to what's described in the datasheet, there seems
 	 * to be no way of probing the presence of that device using I2C
 	 * commands. So we need to blindly believe it is there, and wait
-	 * for interrupts to occur. */
+	 * for interrupts to occur.
+	 */
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
@@ -212,9 +224,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
 		goto err2;
 	}
 
-	/* Disable the irq for now. It will be enabled once the input device
-	 * is opened. */
-	disable_irq(priv->irq);
+	/*
+	 * Disable the device for now. It will be enabled once the
+	 * input device is opened.
+	 */
+	eeti_ts_stop(priv);
 
 	device_init_wakeup(&client->dev, 0);
 	return 0;
@@ -235,6 +249,12 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
 
 	free_irq(priv->irq, priv);
+	/*
+	 * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
+	 * so that device still works if we reload the driver.
+	 */
+	enable_irq(priv->irq);
+
 	input_unregister_device(priv->input);
 	i2c_set_clientdata(client, NULL);
 	kfree(priv);
@@ -246,6 +266,14 @@ static int __devexit eeti_ts_remove(struct i2c_client *client)
 static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 {
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+	struct input_dev *input_dev = priv->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		eeti_ts_stop(priv);
+
+	mutex_unlock(&input_dev->mutex);
 
 	if (device_may_wakeup(&client->dev))
 		enable_irq_wake(priv->irq);
@@ -256,10 +284,18 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
 static int eeti_ts_resume(struct i2c_client *client)
 {
 	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+	struct input_dev *input_dev = priv->input;
 
 	if (device_may_wakeup(&client->dev))
 		disable_irq_wake(priv->irq);
 
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		eeti_ts_start(priv);
+
+	mutex_unlock(&input_dev->mutex);
+
 	return 0;
 }
 #else
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
new file mode 100644
index 00000000000..2da6cc31bb2
--- /dev/null
+++ b/drivers/input/touchscreen/hampshire.c
@@ -0,0 +1,205 @@
+/*
+ * Hampshire serial touchscreen driver
+ *
+ * Copyright (c) 2010 Adam Bennett
+ * Based on the dynapro driver (c) Tias Guns
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2010/04/08 Adam Bennett <abennett72@gmail.com>
+ *   Copied dynapro.c and edited for Hampshire 4-byte protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Hampshire serial touchscreen driver"
+
+MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40
+#define HAMPSHIRE_FORMAT_LENGTH 4
+#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80
+
+#define HAMPSHIRE_MIN_XC 0
+#define HAMPSHIRE_MAX_XC 0x1000
+#define HAMPSHIRE_MIN_YC 0
+#define HAMPSHIRE_MAX_YC 0x1000
+
+#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6))
+#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9))
+#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct hampshire {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[HAMPSHIRE_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void hampshire_process_data(struct hampshire *phampshire)
+{
+	struct input_dev *dev = phampshire->dev;
+
+	if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) {
+		input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data));
+		input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data));
+		input_report_key(dev, BTN_TOUCH,
+				 HAMPSHIRE_GET_TOUCHED(phampshire->data));
+		input_sync(dev);
+
+		phampshire->idx = 0;
+	}
+}
+
+static irqreturn_t hampshire_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	phampshire->data[phampshire->idx] = data;
+
+	if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0])
+		hampshire_process_data(phampshire);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			phampshire->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void hampshire_disconnect(struct serio *serio)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	input_get_device(phampshire->dev);
+	input_unregister_device(phampshire->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(phampshire->dev);
+	kfree(phampshire);
+}
+
+/*
+ * hampshire_connect() is the routine that is called when someone adds a
+ * new serio device that supports hampshire protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int hampshire_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct hampshire *phampshire;
+	struct input_dev *input_dev;
+	int err;
+
+	phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!phampshire || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	phampshire->serio = serio;
+	phampshire->dev = input_dev;
+	snprintf(phampshire->phys, sizeof(phampshire->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Hampshire Serial TouchScreen";
+	input_dev->phys = phampshire->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_HAMPSHIRE;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(phampshire->dev, ABS_X,
+			     HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0);
+	input_set_abs_params(phampshire->dev, ABS_Y,
+			     HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, phampshire);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(phampshire->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(phampshire);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id hampshire_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_HAMPSHIRE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, hampshire_serio_ids);
+
+static struct serio_driver hampshire_drv = {
+	.driver		= {
+		.name	= "hampshire",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= hampshire_serio_ids,
+	.interrupt	= hampshire_interrupt,
+	.connect	= hampshire_connect,
+	.disconnect	= hampshire_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init hampshire_init(void)
+{
+	return serio_register_driver(&hampshire_drv);
+}
+
+static void __exit hampshire_exit(void)
+{
+	serio_unregister_driver(&hampshire_drv);
+}
+
+module_init(hampshire_init);
+module_exit(hampshire_exit);
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 98a7d127948..e0b7c834111 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -37,9 +37,7 @@
 
 #include <plat/adc.h>
 #include <plat/regs-adc.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/ts.h>
+#include <plat/ts.h>
 
 #define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
 
@@ -57,6 +55,8 @@
 			 S3C2410_ADCTSC_AUTO_PST | \
 			 S3C2410_ADCTSC_XY_PST(0))
 
+#define FEAT_PEN_IRQ	(1 << 0)	/* HAS ADCCLRINTPNDNUP */
+
 /* Per-touchscreen data. */
 
 /**
@@ -71,6 +71,7 @@
  * @irq_tc: The interrupt number for pen up/down interrupt
  * @count: The number of samples collected.
  * @shift: The log2 of the maximum count to read in one go.
+ * @features: The features supported by the TSADC MOdule.
  */
 struct s3c2410ts {
 	struct s3c_adc_client *client;
@@ -83,26 +84,12 @@ struct s3c2410ts {
 	int irq_tc;
 	int count;
 	int shift;
+	int features;
 };
 
 static struct s3c2410ts ts;
 
 /**
- * s3c2410_ts_connect - configure gpio for s3c2410 systems
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
-*/
-static inline void s3c2410_ts_connect(void)
-{
-	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
-}
-
-/**
  * get_down - return the down state of the pen
  * @data0: The data read from ADCDAT0 register.
  * @data1: The data read from ADCDAT1 register.
@@ -188,6 +175,11 @@ static irqreturn_t stylus_irq(int irq, void *dev_id)
 	else
 		dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
 
+	if (ts.features & FEAT_PEN_IRQ) {
+		/* Clear pen down/up interrupt */
+		writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP);
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -296,9 +288,9 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	/* Configure the touchscreen external FETs on the S3C2410 */
-	if (!platform_get_device_id(pdev)->driver_data)
-		s3c2410_ts_connect();
+	/* inititalise the gpio */
+	if (info->cfg_gpio)
+		info->cfg_gpio(to_platform_device(ts.dev));
 
 	ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,
 				     s3c24xx_ts_conversion, 1);
@@ -334,6 +326,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev)
 	ts.input->id.version = 0x0102;
 
 	ts.shift = info->oversampling_shift;
+	ts.features = platform_get_device_id(pdev)->driver_data;
 
 	ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,
 			  "s3c2410_ts_pen", ts.input);
@@ -420,15 +413,14 @@ static struct dev_pm_ops s3c_ts_pmops = {
 #endif
 
 static struct platform_device_id s3cts_driver_ids[] = {
-	{ "s3c2410-ts", 0 },
-	{ "s3c2440-ts", 1 },
+	{ "s3c64xx-ts", FEAT_PEN_IRQ },
 	{ }
 };
 MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);
 
 static struct platform_driver s3c_ts_driver = {
 	.driver         = {
-		.name   = "s3c24xx-ts",
+		.name   = "samsung-ts",
 		.owner  = THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm	= &s3c_ts_pmops,
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index be23780e8a3..769b479fcaa 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -347,6 +347,8 @@ static int __devexit tsc2007_remove(struct i2c_client *client)
 	struct tsc2007	*ts = i2c_get_clientdata(client);
 	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 
+	i2c_set_clientdata(client, NULL);
+
 	tsc2007_free_irq(ts);
 
 	if (pdata->exit_platform_hw)
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 99330bbdbac..29a8bbf3f08 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -811,12 +811,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch)
 
 	priv = usbtouch->priv;
 
-	priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+	priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
+				GFP_KERNEL);
 	if (!priv->ack_buf)
 		goto err_priv;
 
-	memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
-
 	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
 	if (!priv->ack) {
 		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
@@ -1291,8 +1290,8 @@ static void usbtouch_close(struct input_dev *input)
 static void usbtouch_free_buffers(struct usb_device *udev,
 				  struct usbtouch_usb *usbtouch)
 {
-	usb_buffer_free(udev, usbtouch->type->rept_size,
-	                usbtouch->data, usbtouch->data_dma);
+	usb_free_coherent(udev, usbtouch->type->rept_size,
+			  usbtouch->data, usbtouch->data_dma);
 	kfree(usbtouch->buffer);
 }
 
@@ -1336,8 +1335,8 @@ static int usbtouch_probe(struct usb_interface *intf,
 	if (!type->process_pkt)
 		type->process_pkt = usbtouch_process_pkt;
 
-	usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
-	                                  GFP_KERNEL, &usbtouch->data_dma);
+	usbtouch->data = usb_alloc_coherent(udev, type->rept_size,
+					    GFP_KERNEL, &usbtouch->data_dma);
 	if (!usbtouch->data)
 		goto out_free;
 
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 5109bf3dd85..cbfef1ea7e3 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -200,7 +200,7 @@ void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
 	mutex_lock(&wm->codec_mutex);
 	reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 
-	if (status & WM97XX_GPIO_HIGH)
+	if (status == WM97XX_GPIO_HIGH)
 		reg |= gpio;
 	else
 		reg &= ~gpio;