diff options
Diffstat (limited to 'drivers/input')
50 files changed, 2301 insertions, 334 deletions
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index 5b8f59d6c3e..c351aa421f8 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -47,7 +47,7 @@ static void gameport_disconnect_port(struct gameport *gameport); #if defined(__i386__) -#include <asm/i8253.h> +#include <linux/i8253.h> #define DELTA(x,y) ((y)-(x)+((y)<(x)?1193182/HZ:0)) #define GET_TIME(x) do { x = get_time_pit(); } while (0) diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 4afe0a3b488..9882971827e 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -136,7 +136,7 @@ struct analog_port { #ifdef __i386__ -#include <asm/i8253.h> +#include <linux/i8253.h> #define GET_TIME(x) do { if (cpu_has_tsc) rdtscl(x); else x = get_time_pit(); } while (0) #define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? CLOCK_TICK_RATE / HZ : 0))) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 56abf3d0e91..d72887585a1 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -154,10 +154,13 @@ static const struct xpad_device { { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 }, { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, @@ -236,9 +239,10 @@ static struct usb_device_id xpad_table [] = { XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ + XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */ - XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */ + XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ { } }; @@ -545,7 +549,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) struct usb_endpoint_descriptor *ep_irq_out; int error; - if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX) + if (xpad->xtype == XTYPE_UNKNOWN) return 0; xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, @@ -579,13 +583,13 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) static void xpad_stop_output(struct usb_xpad *xpad) { - if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) + if (xpad->xtype != XTYPE_UNKNOWN) usb_kill_urb(xpad->irq_out); } static void xpad_deinit_output(struct usb_xpad *xpad) { - if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) { + if (xpad->xtype != XTYPE_UNKNOWN) { usb_free_urb(xpad->irq_out); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); @@ -632,6 +636,23 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + case XTYPE_XBOX360W: + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x01; + xpad->odata[2] = 0x0F; + xpad->odata[3] = 0xC0; + xpad->odata[4] = 0x00; + xpad->odata[5] = strong / 256; + xpad->odata[6] = weak / 256; + xpad->odata[7] = 0x00; + xpad->odata[8] = 0x00; + xpad->odata[9] = 0x00; + xpad->odata[10] = 0x00; + xpad->odata[11] = 0x00; + xpad->irq_out->transfer_buffer_length = 12; + + return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + default: dbg("%s - rumble command sent to unsupported xpad type: %d", __func__, xpad->xtype); @@ -644,7 +665,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect static int xpad_init_ff(struct usb_xpad *xpad) { - if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX) + if (xpad->xtype == XTYPE_UNKNOWN) return 0; input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index af45d275f68..7b404e5443e 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -9,7 +9,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index 631598663aa..c7708263051 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -8,7 +8,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 11478eb2c27..19cfc0cf558 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1578,14 +1578,14 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) atkbd_platform_fixup = atkbd_apply_forced_release_keylist; atkbd_platform_fixup_data = id->driver_data; - return 0; + return 1; } static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) { atkbd_platform_scancode_fixup = id->driver_data; - return 0; + return 1; } static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 6e6145b9a4c..67df91af842 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -2,6 +2,7 @@ * Driver for keys on GPIO lines capable of generating interrupts. * * Copyright 2005 Phil Blundell + * Copyright 2010, 2011 David Jander <david@protonic.nl> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,6 +26,8 @@ #include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/gpio.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> struct gpio_button_data { struct gpio_keys_button *button; @@ -415,7 +418,7 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev, if (!button->can_disable) irqflags |= IRQF_SHARED; - error = request_any_context_irq(irq, gpio_keys_isr, irqflags, desc, bdata); + error = request_threaded_irq(irq, NULL, gpio_keys_isr, irqflags, desc, bdata); if (error < 0) { dev_err(dev, "Unable to claim irq %d; error %d\n", irq, error); @@ -445,15 +448,120 @@ static void gpio_keys_close(struct input_dev *input) ddata->disable(input->dev.parent); } +/* + * Handlers for alternative sources of platform_data + */ +#ifdef CONFIG_OF +/* + * Translate OpenFirmware node properties into platform_data + */ +static int gpio_keys_get_devtree_pdata(struct device *dev, + struct gpio_keys_platform_data *pdata) +{ + struct device_node *node, *pp; + int i; + struct gpio_keys_button *buttons; + const u32 *reg; + int len; + + node = dev->of_node; + if (node == NULL) + return -ENODEV; + + memset(pdata, 0, sizeof *pdata); + + pdata->rep = !!of_get_property(node, "autorepeat", &len); + + /* First count the subnodes */ + pdata->nbuttons = 0; + pp = NULL; + while ((pp = of_get_next_child(node, pp))) + pdata->nbuttons++; + + if (pdata->nbuttons == 0) + return -ENODEV; + + buttons = kzalloc(pdata->nbuttons * (sizeof *buttons), GFP_KERNEL); + if (!buttons) + return -ENOMEM; + + pp = NULL; + i = 0; + while ((pp = of_get_next_child(node, pp))) { + enum of_gpio_flags flags; + + if (!of_find_property(pp, "gpios", NULL)) { + pdata->nbuttons--; + dev_warn(dev, "Found button without gpios\n"); + continue; + } + buttons[i].gpio = of_get_gpio_flags(pp, 0, &flags); + buttons[i].active_low = flags & OF_GPIO_ACTIVE_LOW; + + reg = of_get_property(pp, "linux,code", &len); + if (!reg) { + dev_err(dev, "Button without keycode: 0x%x\n", buttons[i].gpio); + goto out_fail; + } + buttons[i].code = be32_to_cpup(reg); + + buttons[i].desc = of_get_property(pp, "label", &len); + + reg = of_get_property(pp, "linux,input-type", &len); + buttons[i].type = reg ? be32_to_cpup(reg) : EV_KEY; + + buttons[i].wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL); + + reg = of_get_property(pp, "debounce-interval", &len); + buttons[i].debounce_interval = reg ? be32_to_cpup(reg) : 5; + + i++; + } + + pdata->buttons = buttons; + + return 0; + +out_fail: + kfree(buttons); + return -ENODEV; +} + +static struct of_device_id gpio_keys_of_match[] = { + { .compatible = "gpio-keys", }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_keys_of_match); + +#else + +static int gpio_keys_get_devtree_pdata(struct device *dev, + struct gpio_keys_platform_data *altp) +{ + return -ENODEV; +} + +#define gpio_keys_of_match NULL + +#endif + static int __devinit gpio_keys_probe(struct platform_device *pdev) { struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; struct gpio_keys_drvdata *ddata; struct device *dev = &pdev->dev; + struct gpio_keys_platform_data alt_pdata; struct input_dev *input; int i, error; int wakeup = 0; + if (!pdata) { + error = gpio_keys_get_devtree_pdata(dev, &alt_pdata); + if (error) + return error; + pdata = &alt_pdata; + } + ddata = kzalloc(sizeof(struct gpio_keys_drvdata) + pdata->nbuttons * sizeof(struct gpio_button_data), GFP_KERNEL); @@ -544,13 +652,15 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail1: input_free_device(input); kfree(ddata); + /* If we have no platform_data, we allocated buttons dynamically. */ + if (!pdev->dev.platform_data) + kfree(pdata->buttons); return error; } static int __devexit gpio_keys_remove(struct platform_device *pdev) { - struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); struct input_dev *input = ddata->input; int i; @@ -559,31 +669,39 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); - for (i = 0; i < pdata->nbuttons; i++) { - int irq = gpio_to_irq(pdata->buttons[i].gpio); + for (i = 0; i < ddata->n_buttons; i++) { + int irq = gpio_to_irq(ddata->data[i].button->gpio); free_irq(irq, &ddata->data[i]); if (ddata->data[i].timer_debounce) del_timer_sync(&ddata->data[i].timer); cancel_work_sync(&ddata->data[i].work); - gpio_free(pdata->buttons[i].gpio); + gpio_free(ddata->data[i].button->gpio); } input_unregister_device(input); + /* + * If we had no platform_data, we allocated buttons dynamically, and + * must free them here. ddata->data[0].button is the pointer to the + * beginning of the allocated array. + */ + if (!pdev->dev.platform_data) + kfree(ddata->data[0].button); + + kfree(ddata); + return 0; } - -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int gpio_keys_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); int i; - if (device_may_wakeup(&pdev->dev)) { - for (i = 0; i < pdata->nbuttons; i++) { - struct gpio_keys_button *button = &pdata->buttons[i]; + if (device_may_wakeup(dev)) { + for (i = 0; i < ddata->n_buttons; i++) { + struct gpio_keys_button *button = ddata->data[i].button; if (button->wakeup) { int irq = gpio_to_irq(button->gpio); enable_irq_wake(irq); @@ -596,15 +714,13 @@ static int gpio_keys_suspend(struct device *dev) static int gpio_keys_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); - struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); int i; - for (i = 0; i < pdata->nbuttons; i++) { + for (i = 0; i < ddata->n_buttons; i++) { - struct gpio_keys_button *button = &pdata->buttons[i]; - if (button->wakeup && device_may_wakeup(&pdev->dev)) { + struct gpio_keys_button *button = ddata->data[i].button; + if (button->wakeup && device_may_wakeup(dev)) { int irq = gpio_to_irq(button->gpio); disable_irq_wake(irq); } @@ -615,22 +731,18 @@ static int gpio_keys_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops gpio_keys_pm_ops = { - .suspend = gpio_keys_suspend, - .resume = gpio_keys_resume, -}; #endif +static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume); + static struct platform_driver gpio_keys_device_driver = { .probe = gpio_keys_probe, .remove = __devexit_p(gpio_keys_remove), .driver = { .name = "gpio-keys", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &gpio_keys_pm_ops, -#endif + .of_match_table = gpio_keys_of_match, } }; @@ -644,10 +756,10 @@ static void __exit gpio_keys_exit(void) platform_driver_unregister(&gpio_keys_device_driver); } -module_init(gpio_keys_init); +late_initcall(gpio_keys_init); module_exit(gpio_keys_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); -MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); +MODULE_DESCRIPTION("Keyboard driver for GPIOs"); MODULE_ALIAS("platform:gpio-keys"); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 71f744a8e68..756348a7f93 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -146,7 +146,6 @@ struct lm8323_chip { /* device lock */ struct mutex lock; struct i2c_client *client; - struct work_struct work; struct input_dev *idev; bool kp_enabled; bool pm_suspend; @@ -162,7 +161,6 @@ struct lm8323_chip { #define client_to_lm8323(c) container_of(c, struct lm8323_chip, client) #define dev_to_lm8323(d) container_of(d, struct lm8323_chip, client->dev) -#define work_to_lm8323(w) container_of(w, struct lm8323_chip, work) #define cdev_to_pwm(c) container_of(c, struct lm8323_pwm, cdev) #define work_to_pwm(w) container_of(w, struct lm8323_pwm, work) @@ -375,9 +373,9 @@ static void pwm_done(struct lm8323_pwm *pwm) * Bottom half: handle the interrupt by posting key events, or dealing with * errors appropriately. */ -static void lm8323_work(struct work_struct *work) +static irqreturn_t lm8323_irq(int irq, void *_lm) { - struct lm8323_chip *lm = work_to_lm8323(work); + struct lm8323_chip *lm = _lm; u8 ints; int i; @@ -409,16 +407,6 @@ static void lm8323_work(struct work_struct *work) } mutex_unlock(&lm->lock); -} - -/* - * We cannot use I2C in interrupt context, so we just schedule work. - */ -static irqreturn_t lm8323_irq(int irq, void *data) -{ - struct lm8323_chip *lm = data; - - schedule_work(&lm->work); return IRQ_HANDLED; } @@ -675,7 +663,6 @@ static int __devinit lm8323_probe(struct i2c_client *client, lm->client = client; lm->idev = idev; mutex_init(&lm->lock); - INIT_WORK(&lm->work, lm8323_work); lm->size_x = pdata->size_x; lm->size_y = pdata->size_y; @@ -746,9 +733,8 @@ static int __devinit lm8323_probe(struct i2c_client *client, goto fail3; } - err = request_irq(client->irq, lm8323_irq, - IRQF_TRIGGER_FALLING | IRQF_DISABLED, - "lm8323", lm); + err = request_threaded_irq(client->irq, NULL, lm8323_irq, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, "lm8323", lm); if (err) { dev_err(&client->dev, "could not get IRQ %d\n", client->irq); goto fail4; @@ -768,8 +754,11 @@ fail3: device_remove_file(&client->dev, &dev_attr_disable_kp); fail2: while (--pwm >= 0) - if (lm->pwm[pwm].enabled) + if (lm->pwm[pwm].enabled) { + device_remove_file(lm->pwm[pwm].cdev.dev, + &dev_attr_time); led_classdev_unregister(&lm->pwm[pwm].cdev); + } fail1: input_free_device(idev); kfree(lm); @@ -783,15 +772,16 @@ static int __devexit lm8323_remove(struct i2c_client *client) disable_irq_wake(client->irq); free_irq(client->irq, lm); - cancel_work_sync(&lm->work); input_unregister_device(lm->idev); device_remove_file(&lm->client->dev, &dev_attr_disable_kp); for (i = 0; i < 3; i++) - if (lm->pwm[i].enabled) + if (lm->pwm[i].enabled) { + device_remove_file(lm->pwm[i].cdev.dev, &dev_attr_time); led_classdev_unregister(&lm->pwm[i].cdev); + } kfree(lm); diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c index 0a9e8119488..1c1615d9a7f 100644 --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -43,14 +43,15 @@ * enabled capacitance sensing inputs and its run/suspend mode. */ #define ELECTRODE_CONF_ADDR 0x5e +#define ELECTRODE_CONF_QUICK_CHARGE 0x80 #define AUTO_CONFIG_CTRL_ADDR 0x7b #define AUTO_CONFIG_USL_ADDR 0x7d #define AUTO_CONFIG_LSL_ADDR 0x7e #define AUTO_CONFIG_TL_ADDR 0x7f /* Threshold of touch/release trigger */ -#define TOUCH_THRESHOLD 0x0f -#define RELEASE_THRESHOLD 0x0a +#define TOUCH_THRESHOLD 0x08 +#define RELEASE_THRESHOLD 0x05 /* Masks for touch and release triggers */ #define TOUCH_STATUS_MASK 0xfff /* MPR121 has 12 keys */ @@ -127,7 +128,7 @@ static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata, struct i2c_client *client) { const struct mpr121_init_register *reg; - unsigned char usl, lsl, tl; + unsigned char usl, lsl, tl, eleconf; int i, t, vdd, ret; /* Set up touch/release threshold for ele0-ele11 */ @@ -163,8 +164,15 @@ static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata, ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl); ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl); ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl); + + /* + * Quick charge bit will let the capacitive charge to ready + * state quickly, or the buttons may not function after system + * boot. + */ + eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE; ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, - mpr121->keycount); + eleconf); if (ret != 0) goto err_i2c_write; diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 6229c3e8e78..e7cc51d0fb3 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -700,9 +700,9 @@ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) return 0; err_pmic_reg_read: - free_irq(kp->key_stuck_irq, NULL); + free_irq(kp->key_stuck_irq, kp); err_req_stuck_irq: - free_irq(kp->key_sense_irq, NULL); + free_irq(kp->key_sense_irq, kp); err_gpio_config: err_get_irq: input_free_device(kp->input); @@ -717,8 +717,8 @@ static int __devexit pmic8xxx_kp_remove(struct platform_device *pdev) struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); device_init_wakeup(&pdev->dev, 0); - free_irq(kp->key_stuck_irq, NULL); - free_irq(kp->key_sense_irq, NULL); + free_irq(kp->key_stuck_irq, kp); + free_irq(kp->key_sense_irq, kp); input_unregister_device(kp->input); kfree(kp); diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c index ca7b89196ab..b21bf5b876b 100644 --- a/drivers/input/keyboard/qt1070.c +++ b/drivers/input/keyboard/qt1070.c @@ -239,8 +239,6 @@ static int __devexit qt1070_remove(struct i2c_client *client) input_unregister_device(data->input); kfree(data); - i2c_set_clientdata(client, NULL); - return 0; } diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 6876700a446..934aeb583b3 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -291,7 +291,7 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev) return 0; } -#if CONFIG_PM_SLEEP +#ifdef CONFIG_PM_SLEEP static int sh_keysc_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 2b3b73ec668..f270447ba95 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -19,6 +19,7 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ +#include <linux/kernel.h> #include <linux/module.h> #include <linux/input.h> #include <linux/platform_device.h> @@ -37,7 +38,7 @@ #define KBC_ROW_SCAN_DLY 5 /* KBC uses a 32KHz clock so a cycle = 1/32Khz */ -#define KBC_CYCLE_USEC 32 +#define KBC_CYCLE_MS 32 /* KBC Registers */ @@ -647,7 +648,7 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows; kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt; - kbc->repoll_dly = ((kbc->repoll_dly * KBC_CYCLE_USEC) + 999) / 1000; + kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS); input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; @@ -657,7 +658,7 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) input_set_drvdata(input_dev, kbc); - input_dev->evbit[0] = BIT_MASK(EV_KEY); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_dev->keycode = kbc->keycode; diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c index c8f097a15d8..1c58681de81 100644 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -337,5 +337,5 @@ module_exit(keypad_exit); MODULE_AUTHOR("Cyril Chemparathy"); MODULE_DESCRIPTION("TNETV107X Keypad Driver"); -MODULE_ALIAS("platform: tnetv107x-keypad"); +MODULE_ALIAS("platform:tnetv107x-keypad"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 45dc6aa62ba..c9104bb4db0 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -100,6 +100,27 @@ config INPUT_MAX8925_ONKEY To compile this driver as a module, choose M here: the module will be called max8925_onkey. +config INPUT_MMA8450 + tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" + depends on I2C + select INPUT_POLLDEV + help + Say Y here if you want to support Freescale's MMA8450 Accelerometer + through I2C interface. + + To compile this driver as a module, choose M here: the + module will be called mma8450. + +config INPUT_MPU3050 + tristate "MPU3050 Triaxial gyroscope sensor" + depends on I2C + help + Say Y here if you want to support InvenSense MPU3050 + connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called mpu3050. + config INPUT_APANEL tristate "Fujitsu Lifebook Application Panel buttons" depends on X86 && I2C && LEDS_CLASS @@ -209,6 +230,23 @@ config INPUT_KEYSPAN_REMOTE To compile this driver as a module, choose M here: the module will be called keyspan_remote. +config INPUT_KXTJ9 + tristate "Kionix KXTJ9 tri-axis digital accelerometer" + depends on I2C + help + Say Y here to enable support for the Kionix KXTJ9 digital tri-axis + accelerometer. + + To compile this driver as a module, choose M here: the module will + be called kxtj9. + +config INPUT_KXTJ9_POLLED_MODE + bool "Enable polling mode support" + depends on INPUT_KXTJ9 + select INPUT_POLLDEV + help + Say Y here if you need accelerometer to work in polling mode. + config INPUT_POWERMATE tristate "Griffin PowerMate and Contour Jog support" depends on USB_ARCH_HAS_HCD @@ -267,7 +305,7 @@ config INPUT_TWL4030_PWRBUTTON config INPUT_TWL4030_VIBRA tristate "Support for TWL4030 Vibrator" depends on TWL4030_CORE - select TWL4030_CODEC + select MFD_TWL4030_AUDIO select INPUT_FF_MEMLESS help This option enables support for TWL4030 Vibrator Driver. @@ -275,6 +313,17 @@ config INPUT_TWL4030_VIBRA To compile this driver as a module, choose M here. The module will be called twl4030_vibra. +config INPUT_TWL6040_VIBRA + tristate "Support for TWL6040 Vibrator" + depends on TWL4030_CORE + select TWL6040_CORE + select INPUT_FF_MEMLESS + help + This option enables support for TWL6040 Vibrator Driver. + + To compile this driver as a module, choose M here. The module will + be called twl6040_vibra. + config INPUT_UINPUT tristate "User level driver support" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 38efb2cb182..299ad5edba8 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -25,8 +25,11 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o +obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o +obj-$(CONFIG_INPUT_MMA8450) += mma8450.o +obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o @@ -40,9 +43,9 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o +obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o - diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c index 4f72bdd6941..d00edc9f39d 100644 --- a/drivers/input/misc/bfin_rotary.c +++ b/drivers/input/misc/bfin_rotary.c @@ -6,7 +6,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c new file mode 100644 index 00000000000..783597a9a64 --- /dev/null +++ b/drivers/input/misc/kxtj9.c @@ -0,0 +1,672 @@ +/* + * Copyright (C) 2011 Kionix, Inc. + * Written by Chris Hudson <chudson@kionix.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input/kxtj9.h> +#include <linux/input-polldev.h> + +#define NAME "kxtj9" +#define G_MAX 8000 +/* OUTPUT REGISTERS */ +#define XOUT_L 0x06 +#define WHO_AM_I 0x0F +/* CONTROL REGISTERS */ +#define INT_REL 0x1A +#define CTRL_REG1 0x1B +#define INT_CTRL1 0x1E +#define DATA_CTRL 0x21 +/* CONTROL REGISTER 1 BITS */ +#define PC1_OFF 0x7F +#define PC1_ON (1 << 7) +/* Data ready funtion enable bit: set during probe if using irq mode */ +#define DRDYE (1 << 5) +/* INTERRUPT CONTROL REGISTER 1 BITS */ +/* Set these during probe if using irq mode */ +#define KXTJ9_IEL (1 << 3) +#define KXTJ9_IEA (1 << 4) +#define KXTJ9_IEN (1 << 5) +/* INPUT_ABS CONSTANTS */ +#define FUZZ 3 +#define FLAT 3 +/* RESUME STATE INDICES */ +#define RES_DATA_CTRL 0 +#define RES_CTRL_REG1 1 +#define RES_INT_CTRL1 2 +#define RESUME_ENTRIES 3 + +/* + * The following table lists the maximum appropriate poll interval for each + * available output data rate. + */ +static const struct { + unsigned int cutoff; + u8 mask; +} kxtj9_odr_table[] = { + { 3, ODR800F }, + { 5, ODR400F }, + { 10, ODR200F }, + { 20, ODR100F }, + { 40, ODR50F }, + { 80, ODR25F }, + { 0, ODR12_5F}, +}; + +struct kxtj9_data { + struct i2c_client *client; + struct kxtj9_platform_data pdata; + struct input_dev *input_dev; +#ifdef CONFIG_INPUT_KXTJ9_POLLED_MODE + struct input_polled_dev *poll_dev; +#endif + unsigned int last_poll_interval; + u8 shift; + u8 ctrl_reg1; + u8 data_ctrl; + u8 int_ctrl; +}; + +static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len) +{ + struct i2c_msg msgs[] = { + { + .addr = tj9->client->addr, + .flags = tj9->client->flags, + .len = 1, + .buf = &addr, + }, + { + .addr = tj9->client->addr, + .flags = tj9->client->flags | I2C_M_RD, + .len = len, + .buf = data, + }, + }; + + return i2c_transfer(tj9->client->adapter, msgs, 2); +} + +static void kxtj9_report_acceleration_data(struct kxtj9_data *tj9) +{ + s16 acc_data[3]; /* Data bytes from hardware xL, xH, yL, yH, zL, zH */ + s16 x, y, z; + int err; + + err = kxtj9_i2c_read(tj9, XOUT_L, (u8 *)acc_data, 6); + if (err < 0) + dev_err(&tj9->client->dev, "accelerometer data read failed\n"); + + x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]) >> tj9->shift; + y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]) >> tj9->shift; + z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]) >> tj9->shift; + + input_report_abs(tj9->input_dev, ABS_X, tj9->pdata.negate_x ? -x : x); + input_report_abs(tj9->input_dev, ABS_Y, tj9->pdata.negate_y ? -y : y); + input_report_abs(tj9->input_dev, ABS_Z, tj9->pdata.negate_z ? -z : z); + input_sync(tj9->input_dev); +} + +static irqreturn_t kxtj9_isr(int irq, void *dev) +{ + struct kxtj9_data *tj9 = dev; + int err; + + /* data ready is the only possible interrupt type */ + kxtj9_report_acceleration_data(tj9); + + err = i2c_smbus_read_byte_data(tj9->client, INT_REL); + if (err < 0) + dev_err(&tj9->client->dev, + "error clearing interrupt status: %d\n", err); + + return IRQ_HANDLED; +} + +static int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range) +{ + switch (new_g_range) { + case KXTJ9_G_2G: + tj9->shift = 4; + break; + case KXTJ9_G_4G: + tj9->shift = 3; + break; + case KXTJ9_G_8G: + tj9->shift = 2; + break; + default: + return -EINVAL; + } + + tj9->ctrl_reg1 &= 0xe7; + tj9->ctrl_reg1 |= new_g_range; + + return 0; +} + +static int kxtj9_update_odr(struct kxtj9_data *tj9, unsigned int poll_interval) +{ + int err; + int i; + + /* Use the lowest ODR that can support the requested poll interval */ + for (i = 0; i < ARRAY_SIZE(kxtj9_odr_table); i++) { + tj9->data_ctrl = kxtj9_odr_table[i].mask; + if (poll_interval < kxtj9_odr_table[i].cutoff) + break; + } + + err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(tj9->client, DATA_CTRL, tj9->data_ctrl); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1); + if (err < 0) + return err; + + return 0; +} + +static int kxtj9_device_power_on(struct kxtj9_data *tj9) +{ + if (tj9->pdata.power_on) + return tj9->pdata.power_on(); + + return 0; +} + +static void kxtj9_device_power_off(struct kxtj9_data *tj9) +{ + int err; + + tj9->ctrl_reg1 &= PC1_OFF; + err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1); + if (err < 0) + dev_err(&tj9->client->dev, "soft power off failed\n"); + + if (tj9->pdata.power_off) + tj9->pdata.power_off(); +} + +static int kxtj9_enable(struct kxtj9_data *tj9) +{ + int err; + + err = kxtj9_device_power_on(tj9); + if (err < 0) + return err; + + /* ensure that PC1 is cleared before updating control registers */ + err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0); + if (err < 0) + return err; + + /* only write INT_CTRL_REG1 if in irq mode */ + if (tj9->client->irq) { + err = i2c_smbus_write_byte_data(tj9->client, + INT_CTRL1, tj9->int_ctrl); + if (err < 0) + return err; + } + + err = kxtj9_update_g_range(tj9, tj9->pdata.g_range); + if (err < 0) + return err; + + /* turn on outputs */ + tj9->ctrl_reg1 |= PC1_ON; + err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1); + if (err < 0) + return err; + + err = kxtj9_update_odr(tj9, tj9->last_poll_interval); + if (err < 0) + return err; + + /* clear initial interrupt if in irq mode */ + if (tj9->client->irq) { + err = i2c_smbus_read_byte_data(tj9->client, INT_REL); + if (err < 0) { + dev_err(&tj9->client->dev, + "error clearing interrupt: %d\n", err); + goto fail; + } + } + + return 0; + +fail: + kxtj9_device_power_off(tj9); + return err; +} + +static void kxtj9_disable(struct kxtj9_data *tj9) +{ + kxtj9_device_power_off(tj9); +} + +static int kxtj9_input_open(struct input_dev *input) +{ + struct kxtj9_data *tj9 = input_get_drvdata(input); + + return kxtj9_enable(tj9); +} + +static void kxtj9_input_close(struct input_dev *dev) +{ + struct kxtj9_data *tj9 = input_get_drvdata(dev); + + kxtj9_disable(tj9); +} + +static void __devinit kxtj9_init_input_device(struct kxtj9_data *tj9, + struct input_dev *input_dev) +{ + __set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT); + input_set_abs_params(input_dev, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT); + input_set_abs_params(input_dev, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT); + + input_dev->name = "kxtj9_accel"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &tj9->client->dev; +} + +static int __devinit kxtj9_setup_input_device(struct kxtj9_data *tj9) +{ + struct input_dev *input_dev; + int err; + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&tj9->client->dev, "input device allocate failed\n"); + return -ENOMEM; + } + + tj9->input_dev = input_dev; + + input_dev->open = kxtj9_input_open; + input_dev->close = kxtj9_input_close; + input_set_drvdata(input_dev, tj9); + + kxtj9_init_input_device(tj9, input_dev); + + err = input_register_device(tj9->input_dev); + if (err) { + dev_err(&tj9->client->dev, + "unable to register input polled device %s: %d\n", + tj9->input_dev->name, err); + input_free_device(tj9->input_dev); + return err; + } + + return 0; +} + +/* + * When IRQ mode is selected, we need to provide an interface to allow the user + * to change the output data rate of the part. For consistency, we are using + * the set_poll method, which accepts a poll interval in milliseconds, and then + * calls update_odr() while passing this value as an argument. In IRQ mode, the + * data outputs will not be read AT the requested poll interval, rather, the + * lowest ODR that can support the requested interval. The client application + * will be responsible for retrieving data from the input node at the desired + * interval. + */ + +/* Returns currently selected poll interval (in ms) */ +static ssize_t kxtj9_get_poll(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct kxtj9_data *tj9 = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", tj9->last_poll_interval); +} + +/* Allow users to select a new poll interval (in ms) */ +static ssize_t kxtj9_set_poll(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct kxtj9_data *tj9 = i2c_get_clientdata(client); + struct input_dev *input_dev = tj9->input_dev; + unsigned int interval; + int error; + + error = kstrtouint(buf, 10, &interval); + if (error < 0) + return error; + + /* Lock the device to prevent races with open/close (and itself) */ + mutex_lock(&input_dev->mutex); + + disable_irq(client->irq); + + /* + * Set current interval to the greater of the minimum interval or + * the requested interval + */ + tj9->last_poll_interval = max(interval, tj9->pdata.min_interval); + + kxtj9_update_odr(tj9, tj9->last_poll_interval); + + enable_irq(client->irq); + mutex_unlock(&input_dev->mutex); + + return count; +} + +static DEVICE_ATTR(poll, S_IRUGO|S_IWUSR, kxtj9_get_poll, kxtj9_set_poll); + +static struct attribute *kxtj9_attributes[] = { + &dev_attr_poll.attr, + NULL +}; + +static struct attribute_group kxtj9_attribute_group = { + .attrs = kxtj9_attributes +}; + + +#ifdef CONFIG_INPUT_KXTJ9_POLLED_MODE +static void kxtj9_poll(struct input_polled_dev *dev) +{ + struct kxtj9_data *tj9 = dev->private; + unsigned int poll_interval = dev->poll_interval; + + kxtj9_report_acceleration_data(tj9); + + if (poll_interval != tj9->last_poll_interval) { + kxtj9_update_odr(tj9, poll_interval); + tj9->last_poll_interval = poll_interval; + } +} + +static void kxtj9_polled_input_open(struct input_polled_dev *dev) +{ + struct kxtj9_data *tj9 = dev->private; + + kxtj9_enable(tj9); +} + +static void kxtj9_polled_input_close(struct input_polled_dev *dev) +{ + struct kxtj9_data *tj9 = dev->private; + + kxtj9_disable(tj9); +} + +static int __devinit kxtj9_setup_polled_device(struct kxtj9_data *tj9) +{ + int err; + struct input_polled_dev *poll_dev; + poll_dev = input_allocate_polled_device(); + + if (!poll_dev) { + dev_err(&tj9->client->dev, + "Failed to allocate polled device\n"); + return -ENOMEM; + } + + tj9->poll_dev = poll_dev; + tj9->input_dev = poll_dev->input; + + poll_dev->private = tj9; + poll_dev->poll = kxtj9_poll; + poll_dev->open = kxtj9_polled_input_open; + poll_dev->close = kxtj9_polled_input_close; + + kxtj9_init_input_device(tj9, poll_dev->input); + + err = input_register_polled_device(poll_dev); + if (err) { + dev_err(&tj9->client->dev, + "Unable to register polled device, err=%d\n", err); + input_free_polled_device(poll_dev); + return err; + } + + return 0; +} + +static void __devexit kxtj9_teardown_polled_device(struct kxtj9_data *tj9) +{ + input_unregister_polled_device(tj9->poll_dev); + input_free_polled_device(tj9->poll_dev); +} + +#else + +static inline int kxtj9_setup_polled_device(struct kxtj9_data *tj9) +{ + return -ENOSYS; +} + +static inline void kxtj9_teardown_polled_device(struct kxtj9_data *tj9) +{ +} + +#endif + +static int __devinit kxtj9_verify(struct kxtj9_data *tj9) +{ + int retval; + + retval = kxtj9_device_power_on(tj9); + if (retval < 0) + return retval; + + retval = i2c_smbus_read_byte_data(tj9->client, WHO_AM_I); + if (retval < 0) { + dev_err(&tj9->client->dev, "read err int source\n"); + goto out; + } + + retval = retval != 0x06 ? -EIO : 0; + +out: + kxtj9_device_power_off(tj9); + return retval; +} + +static int __devinit kxtj9_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct kxtj9_platform_data *pdata = client->dev.platform_data; + struct kxtj9_data *tj9; + int err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "client is not i2c capable\n"); + return -ENXIO; + } + + if (!pdata) { + dev_err(&client->dev, "platform data is NULL; exiting\n"); + return -EINVAL; + } + + tj9 = kzalloc(sizeof(*tj9), GFP_KERNEL); + if (!tj9) { + dev_err(&client->dev, + "failed to allocate memory for module data\n"); + return -ENOMEM; + } + + tj9->client = client; + tj9->pdata = *pdata; + + if (pdata->init) { + err = pdata->init(); + if (err < 0) + goto err_free_mem; + } + + err = kxtj9_verify(tj9); + if (err < 0) { + dev_err(&client->dev, "device not recognized\n"); + goto err_pdata_exit; + } + + i2c_set_clientdata(client, tj9); + + tj9->ctrl_reg1 = tj9->pdata.res_12bit | tj9->pdata.g_range; + tj9->data_ctrl = tj9->pdata.data_odr_init; + + if (client->irq) { + /* If in irq mode, populate INT_CTRL_REG1 and enable DRDY. */ + tj9->int_ctrl |= KXTJ9_IEN | KXTJ9_IEA | KXTJ9_IEL; + tj9->ctrl_reg1 |= DRDYE; + + err = kxtj9_setup_input_device(tj9); + if (err) + goto err_pdata_exit; + + err = request_threaded_irq(client->irq, NULL, kxtj9_isr, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "kxtj9-irq", tj9); + if (err) { + dev_err(&client->dev, "request irq failed: %d\n", err); + goto err_destroy_input; + } + + err = sysfs_create_group(&client->dev.kobj, &kxtj9_attribute_group); + if (err) { + dev_err(&client->dev, "sysfs create failed: %d\n", err); + goto err_free_irq; + } + + } else { + err = kxtj9_setup_polled_device(tj9); + if (err) + goto err_pdata_exit; + } + + return 0; + +err_free_irq: + free_irq(client->irq, tj9); +err_destroy_input: + input_unregister_device(tj9->input_dev); +err_pdata_exit: + if (tj9->pdata.exit) + tj9->pdata.exit(); +err_free_mem: + kfree(tj9); + return err; +} + +static int __devexit kxtj9_remove(struct i2c_client *client) +{ + struct kxtj9_data *tj9 = i2c_get_clientdata(client); + + if (client->irq) { + sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group); + free_irq(client->irq, tj9); + input_unregister_device(tj9->input_dev); + } else { + kxtj9_teardown_polled_device(tj9); + } + + if (tj9->pdata.exit) + tj9->pdata.exit(); + + kfree(tj9); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int kxtj9_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct kxtj9_data *tj9 = i2c_get_clientdata(client); + struct input_dev *input_dev = tj9->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + kxtj9_disable(tj9); + + mutex_unlock(&input_dev->mutex); + return 0; +} + +static int kxtj9_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct kxtj9_data *tj9 = i2c_get_clientdata(client); + struct input_dev *input_dev = tj9->input_dev; + int retval = 0; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + kxtj9_enable(tj9); + + mutex_unlock(&input_dev->mutex); + return retval; +} +#endif + +static SIMPLE_DEV_PM_OPS(kxtj9_pm_ops, kxtj9_suspend, kxtj9_resume); + +static const struct i2c_device_id kxtj9_id[] = { + { NAME, 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, kxtj9_id); + +static struct i2c_driver kxtj9_driver = { + .driver = { + .name = NAME, + .owner = THIS_MODULE, + .pm = &kxtj9_pm_ops, + }, + .probe = kxtj9_probe, + .remove = __devexit_p(kxtj9_remove), + .id_table = kxtj9_id, +}; + +static int __init kxtj9_init(void) +{ + return i2c_add_driver(&kxtj9_driver); +} +module_init(kxtj9_init); + +static void __exit kxtj9_exit(void) +{ + i2c_del_driver(&kxtj9_driver); +} +module_exit(kxtj9_exit); + +MODULE_DESCRIPTION("KXTJ9 accelerometer driver"); +MODULE_AUTHOR("Chris Hudson <chudson@kionix.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c new file mode 100644 index 00000000000..6c76cf79299 --- /dev/null +++ b/drivers/input/misc/mma8450.c @@ -0,0 +1,264 @@ +/* + * Driver for Freescale's 3-Axis Accelerometer MMA8450 + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input-polldev.h> +#include <linux/of_device.h> + +#define MMA8450_DRV_NAME "mma8450" + +#define MODE_CHANGE_DELAY_MS 100 +#define POLL_INTERVAL 100 +#define POLL_INTERVAL_MAX 500 + +/* register definitions */ +#define MMA8450_STATUS 0x00 +#define MMA8450_STATUS_ZXYDR 0x08 + +#define MMA8450_OUT_X8 0x01 +#define MMA8450_OUT_Y8 0x02 +#define MMA8450_OUT_Z8 0x03 + +#define MMA8450_OUT_X_LSB 0x05 +#define MMA8450_OUT_X_MSB 0x06 +#define MMA8450_OUT_Y_LSB 0x07 +#define MMA8450_OUT_Y_MSB 0x08 +#define MMA8450_OUT_Z_LSB 0x09 +#define MMA8450_OUT_Z_MSB 0x0a + +#define MMA8450_XYZ_DATA_CFG 0x16 + +#define MMA8450_CTRL_REG1 0x38 +#define MMA8450_CTRL_REG2 0x39 + +/* mma8450 status */ +struct mma8450 { + struct i2c_client *client; + struct input_polled_dev *idev; +}; + +static int mma8450_read(struct mma8450 *m, unsigned off) +{ + struct i2c_client *c = m->client; + int ret; + + ret = i2c_smbus_read_byte_data(c, off); + if (ret < 0) + dev_err(&c->dev, + "failed to read register 0x%02x, error %d\n", + off, ret); + + return ret; +} + +static int mma8450_write(struct mma8450 *m, unsigned off, u8 v) +{ + struct i2c_client *c = m->client; + int error; + + error = i2c_smbus_write_byte_data(c, off, v); + if (error < 0) { + dev_err(&c->dev, + "failed to write to register 0x%02x, error %d\n", + off, error); + return error; + } + + return 0; +} + +static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z) +{ + struct i2c_client *c = m->client; + u8 buff[6]; + int err; + + err = i2c_smbus_read_i2c_block_data(c, MMA8450_OUT_X_LSB, 6, buff); + if (err < 0) { + dev_err(&c->dev, + "failed to read block data at 0x%02x, error %d\n", + MMA8450_OUT_X_LSB, err); + return err; + } + + *x = ((buff[1] << 4) & 0xff0) | (buff[0] & 0xf); + *y = ((buff[3] << 4) & 0xff0) | (buff[2] & 0xf); + *z = ((buff[5] << 4) & 0xff0) | (buff[4] & 0xf); + + return 0; +} + +static void mma8450_poll(struct input_polled_dev *dev) +{ + struct mma8450 *m = dev->private; + int x, y, z; + int ret; + int err; + + ret = mma8450_read(m, MMA8450_STATUS); + if (ret < 0) + return; + + if (!(ret & MMA8450_STATUS_ZXYDR)) + return; + + err = mma8450_read_xyz(m, &x, &y, &z); + if (err) + return; + + input_report_abs(dev->input, ABS_X, x); + input_report_abs(dev->input, ABS_Y, y); + input_report_abs(dev->input, ABS_Z, z); + input_sync(dev->input); +} + +/* Initialize the MMA8450 chip */ +static void mma8450_open(struct input_polled_dev *dev) +{ + struct mma8450 *m = dev->private; + int err; + + /* enable all events from X/Y/Z, no FIFO */ + err = mma8450_write(m, MMA8450_XYZ_DATA_CFG, 0x07); + if (err) + return; + + /* + * Sleep mode poll rate - 50Hz + * System output data rate - 400Hz + * Full scale selection - Active, +/- 2G + */ + err = mma8450_write(m, MMA8450_CTRL_REG1, 0x01); + if (err < 0) + return; + + msleep(MODE_CHANGE_DELAY_MS); +} + +static void mma8450_close(struct input_polled_dev *dev) +{ + struct mma8450 *m = dev->private; + + mma8450_write(m, MMA8450_CTRL_REG1, 0x00); + mma8450_write(m, MMA8450_CTRL_REG2, 0x01); +} + +/* + * I2C init/probing/exit functions + */ +static int __devinit mma8450_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + struct input_polled_dev *idev; + struct mma8450 *m; + int err; + + m = kzalloc(sizeof(struct mma8450), GFP_KERNEL); + idev = input_allocate_polled_device(); + if (!m || !idev) { + err = -ENOMEM; + goto err_free_mem; + } + + m->client = c; + m->idev = idev; + + idev->private = m; + idev->input->name = MMA8450_DRV_NAME; + idev->input->id.bustype = BUS_I2C; + idev->poll = mma8450_poll; + idev->poll_interval = POLL_INTERVAL; + idev->poll_interval_max = POLL_INTERVAL_MAX; + idev->open = mma8450_open; + idev->close = mma8450_close; + + __set_bit(EV_ABS, idev->input->evbit); + input_set_abs_params(idev->input, ABS_X, -2048, 2047, 32, 32); + input_set_abs_params(idev->input, ABS_Y, -2048, 2047, 32, 32); + input_set_abs_params(idev->input, ABS_Z, -2048, 2047, 32, 32); + + err = input_register_polled_device(idev); + if (err) { + dev_err(&c->dev, "failed to register polled input device\n"); + goto err_free_mem; + } + + return 0; + +err_free_mem: + input_free_polled_device(idev); + kfree(m); + return err; +} + +static int __devexit mma8450_remove(struct i2c_client *c) +{ + struct mma8450 *m = i2c_get_clientdata(c); + struct input_polled_dev *idev = m->idev; + + input_unregister_polled_device(idev); + input_free_polled_device(idev); + kfree(m); + + return 0; +} + +static const struct i2c_device_id mma8450_id[] = { + { MMA8450_DRV_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mma8450_id); + +static const struct of_device_id mma8450_dt_ids[] = { + { .compatible = "fsl,mma8450", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, mma8450_dt_ids); + +static struct i2c_driver mma8450_driver = { + .driver = { + .name = MMA8450_DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = mma8450_dt_ids, + }, + .probe = mma8450_probe, + .remove = __devexit_p(mma8450_remove), + .id_table = mma8450_id, +}; + +static int __init mma8450_init(void) +{ + return i2c_add_driver(&mma8450_driver); +} +module_init(mma8450_init); + +static void __exit mma8450_exit(void) +{ + i2c_del_driver(&mma8450_driver); +} +module_exit(mma8450_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MMA8450 3-Axis Accelerometer Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c new file mode 100644 index 00000000000..b95fac15b2e --- /dev/null +++ b/drivers/input/misc/mpu3050.c @@ -0,0 +1,376 @@ +/* + * MPU3050 Tri-axis gyroscope driver + * + * Copyright (C) 2011 Wistron Co.Ltd + * Joseph Lai <joseph_lai@wistron.com> + * + * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version + * + * This is a 'lite' version of the driver, while we consider the right way + * to present the other features to user space. In particular it requires the + * device has an IRQ, and it only provides an input interface, so is not much + * use for device orientation. A fuller version is available from the Meego + * tree. + * + * This program is based on bma023.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> + +#define MPU3050_CHIP_ID_REG 0x00 +#define MPU3050_CHIP_ID 0x69 +#define MPU3050_XOUT_H 0x1D +#define MPU3050_PWR_MGM 0x3E +#define MPU3050_PWR_MGM_POS 6 +#define MPU3050_PWR_MGM_MASK 0x40 + +#define MPU3050_AUTO_DELAY 1000 + +#define MPU3050_MIN_VALUE -32768 +#define MPU3050_MAX_VALUE 32767 + +struct axis_data { + s16 x; + s16 y; + s16 z; +}; + +struct mpu3050_sensor { + struct i2c_client *client; + struct device *dev; + struct input_dev *idev; +}; + +/** + * mpu3050_xyz_read_reg - read the axes values + * @buffer: provide register addr and get register + * @length: length of register + * + * Reads the register values in one transaction or returns a negative + * error code on failure. + */ +static int mpu3050_xyz_read_reg(struct i2c_client *client, + u8 *buffer, int length) +{ + /* + * Annoying we can't make this const because the i2c layer doesn't + * declare input buffers const. + */ + char cmd = MPU3050_XOUT_H; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &cmd, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = buffer, + }, + }; + + return i2c_transfer(client->adapter, msg, 2); +} + +/** + * mpu3050_read_xyz - get co-ordinates from device + * @client: i2c address of sensor + * @coords: co-ordinates to update + * + * Return the converted X Y and Z co-ordinates from the sensor device + */ +static void mpu3050_read_xyz(struct i2c_client *client, + struct axis_data *coords) +{ + u16 buffer[3]; + + mpu3050_xyz_read_reg(client, (u8 *)buffer, 6); + coords->x = be16_to_cpu(buffer[0]); + coords->y = be16_to_cpu(buffer[1]); + coords->z = be16_to_cpu(buffer[2]); + dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__, + coords->x, coords->y, coords->z); +} + +/** + * mpu3050_set_power_mode - set the power mode + * @client: i2c client for the sensor + * @val: value to switch on/off of power, 1: normal power, 0: low power + * + * Put device to normal-power mode or low-power mode. + */ +static void mpu3050_set_power_mode(struct i2c_client *client, u8 val) +{ + u8 value; + + value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM); + value = (value & ~MPU3050_PWR_MGM_MASK) | + (((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^ + MPU3050_PWR_MGM_MASK); + i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value); +} + +/** + * mpu3050_input_open - called on input event open + * @input: input dev of opened device + * + * The input layer calls this function when input event is opened. The + * function will push the device to resume. Then, the device is ready + * to provide data. + */ +static int mpu3050_input_open(struct input_dev *input) +{ + struct mpu3050_sensor *sensor = input_get_drvdata(input); + + pm_runtime_get(sensor->dev); + + return 0; +} + +/** + * mpu3050_input_close - called on input event close + * @input: input dev of closed device + * + * The input layer calls this function when input event is closed. The + * function will push the device to suspend. + */ +static void mpu3050_input_close(struct input_dev *input) +{ + struct mpu3050_sensor *sensor = input_get_drvdata(input); + + pm_runtime_put(sensor->dev); +} + +/** + * mpu3050_interrupt_thread - handle an IRQ + * @irq: interrupt numner + * @data: the sensor + * + * Called by the kernel single threaded after an interrupt occurs. Read + * the sensor data and generate an input event for it. + */ +static irqreturn_t mpu3050_interrupt_thread(int irq, void *data) +{ + struct mpu3050_sensor *sensor = data; + struct axis_data axis; + + mpu3050_read_xyz(sensor->client, &axis); + + input_report_abs(sensor->idev, ABS_X, axis.x); + input_report_abs(sensor->idev, ABS_Y, axis.y); + input_report_abs(sensor->idev, ABS_Z, axis.z); + input_sync(sensor->idev); + + return IRQ_HANDLED; +} + +/** + * mpu3050_probe - device detection callback + * @client: i2c client of found device + * @id: id match information + * + * The I2C layer calls us when it believes a sensor is present at this + * address. Probe to see if this is correct and to validate the device. + * + * If present install the relevant sysfs interfaces and input device. + */ +static int __devinit mpu3050_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mpu3050_sensor *sensor; + struct input_dev *idev; + int ret; + int error; + + sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL); + idev = input_allocate_device(); + if (!sensor || !idev) { + dev_err(&client->dev, "failed to allocate driver data\n"); + error = -ENOMEM; + goto err_free_mem; + } + + sensor->client = client; + sensor->dev = &client->dev; + sensor->idev = idev; + + mpu3050_set_power_mode(client, 1); + msleep(10); + + ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + error = -ENXIO; + goto err_free_mem; + } + + if (ret != MPU3050_CHIP_ID) { + dev_err(&client->dev, "unsupported chip id\n"); + error = -ENXIO; + goto err_free_mem; + } + + idev->name = "MPU3050"; + idev->id.bustype = BUS_I2C; + idev->dev.parent = &client->dev; + + idev->open = mpu3050_input_open; + idev->close = mpu3050_input_close; + + __set_bit(EV_ABS, idev->evbit); + input_set_abs_params(idev, ABS_X, + MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Y, + MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Z, + MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0); + + input_set_drvdata(idev, sensor); + + pm_runtime_set_active(&client->dev); + + error = request_threaded_irq(client->irq, + NULL, mpu3050_interrupt_thread, + IRQF_TRIGGER_RISING, + "mpu_int", sensor); + if (error) { + dev_err(&client->dev, + "can't get IRQ %d, error %d\n", client->irq, error); + goto err_pm_set_suspended; + } + + error = input_register_device(idev); + if (error) { + dev_err(&client->dev, "failed to register input device\n"); + goto err_free_irq; + } + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY); + + return 0; + +err_free_irq: + free_irq(client->irq, sensor); +err_pm_set_suspended: + pm_runtime_set_suspended(&client->dev); +err_free_mem: + input_unregister_device(idev); + kfree(sensor); + return error; +} + +/** + * mpu3050_remove - remove a sensor + * @client: i2c client of sensor being removed + * + * Our sensor is going away, clean up the resources. + */ +static int __devexit mpu3050_remove(struct i2c_client *client) +{ + struct mpu3050_sensor *sensor = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + + free_irq(client->irq, sensor); + input_unregister_device(sensor->idev); + kfree(sensor); + + return 0; +} + +#ifdef CONFIG_PM +/** + * mpu3050_suspend - called on device suspend + * @dev: device being suspended + * + * Put the device into sleep mode before we suspend the machine. + */ +static int mpu3050_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + mpu3050_set_power_mode(client, 0); + + return 0; +} + +/** + * mpu3050_resume - called on device resume + * @dev: device being resumed + * + * Put the device into powered mode on resume. + */ +static int mpu3050_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + mpu3050_set_power_mode(client, 1); + msleep(100); /* wait for gyro chip resume */ + + return 0; +} +#endif + +static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL); + +static const struct i2c_device_id mpu3050_ids[] = { + { "mpu3050", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpu3050_ids); + +static struct i2c_driver mpu3050_i2c_driver = { + .driver = { + .name = "mpu3050", + .owner = THIS_MODULE, + .pm = &mpu3050_pm, + }, + .probe = mpu3050_probe, + .remove = __devexit_p(mpu3050_remove), + .id_table = mpu3050_ids, +}; + +static int __init mpu3050_init(void) +{ + return i2c_add_driver(&mpu3050_i2c_driver); +} +module_init(mpu3050_init); + +static void __exit mpu3050_exit(void) +{ + i2c_del_driver(&mpu3050_i2c_driver); +} +module_exit(mpu3050_exit); + +MODULE_AUTHOR("Wistron Corp."); +MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index f080dd31499..34f4d2e0f50 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/i8253.h> #include <linux/init.h> #include <linux/input.h> #include <linux/platform_device.h> @@ -25,14 +26,6 @@ MODULE_DESCRIPTION("PC Speaker beeper driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pcspkr"); -#if defined(CONFIG_MIPS) || defined(CONFIG_X86) -/* Use the global PIT lock ! */ -#include <asm/i8253.h> -#else -#include <asm/8253pit.h> -static DEFINE_RAW_SPINLOCK(i8253_lock); -#endif - static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { unsigned int count = 0; diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 014dd4ad0d4..3c1a432c14d 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -28,7 +28,7 @@ #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/i2c/twl.h> -#include <linux/mfd/twl4030-codec.h> +#include <linux/mfd/twl4030-audio.h> #include <linux/input.h> #include <linux/slab.h> @@ -67,7 +67,7 @@ static void vibra_enable(struct vibra_info *info) { u8 reg; - twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER); + twl4030_audio_enable_resource(TWL4030_AUDIO_RES_POWER); /* turn H-Bridge on */ twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, @@ -75,7 +75,7 @@ static void vibra_enable(struct vibra_info *info) twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, (reg | TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL); - twl4030_codec_enable_resource(TWL4030_CODEC_RES_APLL); + twl4030_audio_enable_resource(TWL4030_AUDIO_RES_APLL); info->enabled = true; } @@ -90,8 +90,8 @@ static void vibra_disable(struct vibra_info *info) twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, (reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL); - twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL); - twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER); + twl4030_audio_disable_resource(TWL4030_AUDIO_RES_APLL); + twl4030_audio_disable_resource(TWL4030_AUDIO_RES_POWER); info->enabled = false; } @@ -196,7 +196,7 @@ static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops, static int __devinit twl4030_vibra_probe(struct platform_device *pdev) { - struct twl4030_codec_vibra_data *pdata = pdev->dev.platform_data; + struct twl4030_vibra_data *pdata = pdev->dev.platform_data; struct vibra_info *info; int ret; diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c new file mode 100644 index 00000000000..c43002e7ec7 --- /dev/null +++ b/drivers/input/misc/twl6040-vibra.c @@ -0,0 +1,423 @@ +/* + * twl6040-vibra.c - TWL6040 Vibrator driver + * + * Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> + * Author: Misael Lopez Cruz <misael.lopez@ti.com> + * + * Copyright: (C) 2011 Texas Instruments, Inc. + * + * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com> + * Felipe Balbi <felipe.balbi@nokia.com> + * Jari Vanhala <ext-javi.vanhala@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> + +#define EFFECT_DIR_180_DEG 0x8000 + +/* Recommended modulation index 85% */ +#define TWL6040_VIBRA_MOD 85 + +#define TWL6040_NUM_SUPPLIES 2 + +struct vibra_info { + struct device *dev; + struct input_dev *input_dev; + struct workqueue_struct *workqueue; + struct work_struct play_work; + struct mutex mutex; + int irq; + + bool enabled; + int weak_speed; + int strong_speed; + int direction; + + unsigned int vibldrv_res; + unsigned int vibrdrv_res; + unsigned int viblmotor_res; + unsigned int vibrmotor_res; + + struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES]; + + struct twl6040 *twl6040; +}; + +static irqreturn_t twl6040_vib_irq_handler(int irq, void *data) +{ + struct vibra_info *info = data; + struct twl6040 *twl6040 = info->twl6040; + u8 status; + + status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); + if (status & TWL6040_VIBLOCDET) { + dev_warn(info->dev, "Left Vibrator overcurrent detected\n"); + twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL, + TWL6040_VIBENAL); + } + if (status & TWL6040_VIBROCDET) { + dev_warn(info->dev, "Right Vibrator overcurrent detected\n"); + twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR, + TWL6040_VIBENAR); + } + + return IRQ_HANDLED; +} + +static void twl6040_vibra_enable(struct vibra_info *info) +{ + struct twl6040 *twl6040 = info->twl6040; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies); + if (ret) { + dev_err(info->dev, "failed to enable regulators %d\n", ret); + return; + } + + twl6040_power(info->twl6040, 1); + if (twl6040->rev <= TWL6040_REV_ES1_1) { + /* + * ERRATA: Disable overcurrent protection for at least + * 3ms when enabling vibrator drivers to avoid false + * overcurrent detection + */ + twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, + TWL6040_VIBENAL | TWL6040_VIBCTRLL); + twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, + TWL6040_VIBENAR | TWL6040_VIBCTRLR); + usleep_range(3000, 3500); + } + + twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, + TWL6040_VIBENAL); + twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, + TWL6040_VIBENAR); + + info->enabled = true; +} + +static void twl6040_vibra_disable(struct vibra_info *info) +{ + struct twl6040 *twl6040 = info->twl6040; + + twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00); + twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00); + twl6040_power(info->twl6040, 0); + + regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies); + + info->enabled = false; +} + +static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res, + int speed, int direction) +{ + int vpk, max_code; + u8 vibdat; + + /* output swing */ + vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) / + (100 * (vibdrv_res + motor_res)); + + /* 50mV per VIBDAT code step */ + max_code = vpk / 50; + if (max_code > TWL6040_VIBDAT_MAX) + max_code = TWL6040_VIBDAT_MAX; + + /* scale speed to max allowed code */ + vibdat = (u8)((speed * max_code) / USHRT_MAX); + + /* 2's complement for direction > 180 degrees */ + vibdat *= direction; + + return vibdat; +} + +static void twl6040_vibra_set_effect(struct vibra_info *info) +{ + struct twl6040 *twl6040 = info->twl6040; + u8 vibdatl, vibdatr; + int volt; + + /* weak motor */ + volt = regulator_get_voltage(info->supplies[0].consumer) / 1000; + vibdatl = twl6040_vibra_code(volt, info->vibldrv_res, + info->viblmotor_res, + info->weak_speed, info->direction); + + /* strong motor */ + volt = regulator_get_voltage(info->supplies[1].consumer) / 1000; + vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res, + info->vibrmotor_res, + info->strong_speed, info->direction); + + twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl); + twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr); +} + +static void vibra_play_work(struct work_struct *work) +{ + struct vibra_info *info = container_of(work, + struct vibra_info, play_work); + + mutex_lock(&info->mutex); + + if (info->weak_speed || info->strong_speed) { + if (!info->enabled) + twl6040_vibra_enable(info); + + twl6040_vibra_set_effect(info); + } else if (info->enabled) + twl6040_vibra_disable(info); + + mutex_unlock(&info->mutex); +} + +static int vibra_play(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct vibra_info *info = input_get_drvdata(input); + int ret; + + info->weak_speed = effect->u.rumble.weak_magnitude; + info->strong_speed = effect->u.rumble.strong_magnitude; + info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; + + ret = queue_work(info->workqueue, &info->play_work); + if (!ret) { + dev_info(&input->dev, "work is already on queue\n"); + return ret; + } + + return 0; +} + +static void twl6040_vibra_close(struct input_dev *input) +{ + struct vibra_info *info = input_get_drvdata(input); + + cancel_work_sync(&info->play_work); + + mutex_lock(&info->mutex); + + if (info->enabled) + twl6040_vibra_disable(info); + + mutex_unlock(&info->mutex); +} + +#if CONFIG_PM_SLEEP +static int twl6040_vibra_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vibra_info *info = platform_get_drvdata(pdev); + + mutex_lock(&info->mutex); + + if (info->enabled) + twl6040_vibra_disable(info); + + mutex_unlock(&info->mutex); + + return 0; +} + +#endif + +static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); + +static int __devinit twl6040_vibra_probe(struct platform_device *pdev) +{ + struct twl4030_vibra_data *pdata = pdev->dev.platform_data; + struct vibra_info *info; + int ret; + + if (!pdata) { + dev_err(&pdev->dev, "platform_data not available\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "couldn't allocate memory\n"); + return -ENOMEM; + } + + info->dev = &pdev->dev; + info->twl6040 = dev_get_drvdata(pdev->dev.parent); + info->vibldrv_res = pdata->vibldrv_res; + info->vibrdrv_res = pdata->vibrdrv_res; + info->viblmotor_res = pdata->viblmotor_res; + info->vibrmotor_res = pdata->vibrmotor_res; + if ((!info->vibldrv_res && !info->viblmotor_res) || + (!info->vibrdrv_res && !info->vibrmotor_res)) { + dev_err(info->dev, "invalid vibra driver/motor resistance\n"); + ret = -EINVAL; + goto err_kzalloc; + } + + info->irq = platform_get_irq(pdev, 0); + if (info->irq < 0) { + dev_err(info->dev, "invalid irq\n"); + ret = -EINVAL; + goto err_kzalloc; + } + + mutex_init(&info->mutex); + + info->input_dev = input_allocate_device(); + if (info->input_dev == NULL) { + dev_err(info->dev, "couldn't allocate input device\n"); + ret = -ENOMEM; + goto err_kzalloc; + } + + input_set_drvdata(info->input_dev, info); + + info->input_dev->name = "twl6040:vibrator"; + info->input_dev->id.version = 1; + info->input_dev->dev.parent = pdev->dev.parent; + info->input_dev->close = twl6040_vibra_close; + __set_bit(FF_RUMBLE, info->input_dev->ffbit); + + ret = input_ff_create_memless(info->input_dev, NULL, vibra_play); + if (ret < 0) { + dev_err(info->dev, "couldn't register vibrator to FF\n"); + goto err_ialloc; + } + + ret = input_register_device(info->input_dev); + if (ret < 0) { + dev_err(info->dev, "couldn't register input device\n"); + goto err_iff; + } + + platform_set_drvdata(pdev, info); + + ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0, + "twl6040_irq_vib", info); + if (ret) { + dev_err(info->dev, "VIB IRQ request failed: %d\n", ret); + goto err_irq; + } + + info->supplies[0].supply = "vddvibl"; + info->supplies[1].supply = "vddvibr"; + ret = regulator_bulk_get(info->dev, ARRAY_SIZE(info->supplies), + info->supplies); + if (ret) { + dev_err(info->dev, "couldn't get regulators %d\n", ret); + goto err_regulator; + } + + if (pdata->vddvibl_uV) { + ret = regulator_set_voltage(info->supplies[0].consumer, + pdata->vddvibl_uV, + pdata->vddvibl_uV); + if (ret) { + dev_err(info->dev, "failed to set VDDVIBL volt %d\n", + ret); + goto err_voltage; + } + } + + if (pdata->vddvibr_uV) { + ret = regulator_set_voltage(info->supplies[1].consumer, + pdata->vddvibr_uV, + pdata->vddvibr_uV); + if (ret) { + dev_err(info->dev, "failed to set VDDVIBR volt %d\n", + ret); + goto err_voltage; + } + } + + info->workqueue = alloc_workqueue("twl6040-vibra", 0, 0); + if (info->workqueue == NULL) { + dev_err(info->dev, "couldn't create workqueue\n"); + ret = -ENOMEM; + goto err_voltage; + } + INIT_WORK(&info->play_work, vibra_play_work); + + return 0; + +err_voltage: + regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies); +err_regulator: + free_irq(info->irq, info); +err_irq: + input_unregister_device(info->input_dev); + info->input_dev = NULL; +err_iff: + if (info->input_dev) + input_ff_destroy(info->input_dev); +err_ialloc: + input_free_device(info->input_dev); +err_kzalloc: + kfree(info); + return ret; +} + +static int __devexit twl6040_vibra_remove(struct platform_device *pdev) +{ + struct vibra_info *info = platform_get_drvdata(pdev); + + input_unregister_device(info->input_dev); + free_irq(info->irq, info); + regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies); + destroy_workqueue(info->workqueue); + kfree(info); + + return 0; +} + +static struct platform_driver twl6040_vibra_driver = { + .probe = twl6040_vibra_probe, + .remove = __devexit_p(twl6040_vibra_remove), + .driver = { + .name = "twl6040-vibra", + .owner = THIS_MODULE, + .pm = &twl6040_vibra_pm_ops, + }, +}; + +static int __init twl6040_vibra_init(void) +{ + return platform_driver_register(&twl6040_vibra_driver); +} +module_init(twl6040_vibra_init); + +static void __exit twl6040_vibra_exit(void) +{ + platform_driver_unregister(&twl6040_vibra_driver); +} +module_exit(twl6040_vibra_exit); + +MODULE_ALIAS("platform:twl6040-vibra"); +MODULE_DESCRIPTION("TWL6040 Vibra driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); +MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 62bae99424e..ad2e51c04db 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -373,7 +373,7 @@ static struct xenbus_driver xenkbd_driver = { static int __init xenkbd_init(void) { - if (!xen_pv_domain()) + if (!xen_domain()) return -ENODEV; /* Nothing to do if running in dom0. */ diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 7b6ce178f1b..58902fbb989 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -191,7 +191,7 @@ static void __exit gpio_mouse_exit(void) } module_exit(gpio_mouse_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("GPIO mouse driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */ diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 95577c15ae5..4d17d9f3320 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -32,6 +32,7 @@ #define DEBUG #include <linux/slab.h> #include <linux/input.h> +#include <linux/module.h> #include <linux/serio.h> #include <linux/libps2.h> #include <linux/delay.h> diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index c31ad11df6b..83bcaba96b8 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -33,7 +33,7 @@ static const char *desired_serio_phys; static int lifebook_limit_serio3(const struct dmi_system_id *d) { desired_serio_phys = "isa0060/serio3"; - return 0; + return 1; } static bool lifebook_use_6byte_proto; @@ -41,7 +41,7 @@ static bool lifebook_use_6byte_proto; static int lifebook_set_6byte_proto(const struct dmi_system_id *d) { lifebook_use_6byte_proto = true; - return 0; + return 1; } static const struct dmi_system_id __initconst lifebook_dmi_table[] = { diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c index 943cfec1566..6c5d84fcdea 100644 --- a/drivers/input/mouse/pxa930_trkball.c +++ b/drivers/input/mouse/pxa930_trkball.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/input.h> -#include <linux/version.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 1242775fee1..2fc887a5106 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -20,7 +20,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/input.h> #include <linux/ctype.h> #include <linux/libps2.h> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index e06e045bf90..5538fc657af 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -207,27 +207,37 @@ static int synaptics_identify(struct psmouse *psmouse) static int synaptics_resolution(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; - unsigned char res[3]; - unsigned char max[3]; + unsigned char resp[3]; if (SYN_ID_MAJOR(priv->identity) < 4) return 0; - if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) { - if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) { - priv->x_res = res[0]; /* x resolution in units/mm */ - priv->y_res = res[2]; /* y resolution in units/mm */ + if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) { + if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) { + priv->x_res = resp[0]; /* x resolution in units/mm */ + priv->y_res = resp[2]; /* y resolution in units/mm */ } } if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 && SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) { - if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) { - printk(KERN_ERR "Synaptics claims to have dimensions query," - " but I'm not able to read it.\n"); + if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) { + printk(KERN_ERR "Synaptics claims to have max coordinates" + " query, but I'm not able to read it.\n"); + } else { + priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); + priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); + } + } + + if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 && + SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) { + if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) { + printk(KERN_ERR "Synaptics claims to have min coordinates" + " query, but I'm not able to read it.\n"); } else { - priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1); - priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3); + priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); + priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); } } @@ -406,26 +416,10 @@ static int synaptics_parse_hw_state(const unsigned char buf[], memset(hw, 0, sizeof(struct synaptics_hw_state)); if (SYN_MODEL_NEWABS(priv->model_id)) { - hw->x = (((buf[3] & 0x10) << 8) | - ((buf[1] & 0x0f) << 8) | - buf[4]); - hw->y = (((buf[3] & 0x20) << 7) | - ((buf[1] & 0xf0) << 4) | - buf[5]); - - hw->z = buf[2]; hw->w = (((buf[0] & 0x30) >> 2) | ((buf[0] & 0x04) >> 1) | ((buf[3] & 0x04) >> 2)); - if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) { - /* Gesture packet: (x, y, z) at half resolution */ - priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1; - priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1; - priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1; - return 1; - } - hw->left = (buf[0] & 0x01) ? 1 : 0; hw->right = (buf[0] & 0x02) ? 1 : 0; @@ -448,6 +442,22 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0; } + if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) { + /* Gesture packet: (x, y, z) at half resolution */ + priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1; + priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1; + priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1; + return 1; + } + + hw->x = (((buf[3] & 0x10) << 8) | + ((buf[1] & 0x0f) << 8) | + buf[4]); + hw->y = (((buf[3] & 0x20) << 7) | + ((buf[1] & 0xf0) << 4) | + buf[5]); + hw->z = buf[2]; + if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) && ((buf[0] ^ buf[3]) & 0x02)) { switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) { @@ -485,7 +495,8 @@ static int synaptics_parse_hw_state(const unsigned char buf[], return 0; } -static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y) +static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot, + bool active, int x, int y) { input_mt_slot(dev, slot); input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); @@ -502,14 +513,16 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev, int num_fingers) { if (num_fingers >= 2) { - set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y)); - set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y)); + synaptics_report_semi_mt_slot(dev, 0, true, min(a->x, b->x), + min(a->y, b->y)); + synaptics_report_semi_mt_slot(dev, 1, true, max(a->x, b->x), + max(a->y, b->y)); } else if (num_fingers == 1) { - set_slot(dev, 0, true, a->x, a->y); - set_slot(dev, 1, false, 0, 0); + synaptics_report_semi_mt_slot(dev, 0, true, a->x, a->y); + synaptics_report_semi_mt_slot(dev, 1, false, 0, 0); } else { - set_slot(dev, 0, false, 0, 0); - set_slot(dev, 1, false, 0, 0); + synaptics_report_semi_mt_slot(dev, 0, false, 0, 0); + synaptics_report_semi_mt_slot(dev, 1, false, 0, 0); } } @@ -684,23 +697,36 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) { int i; + int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ? + SYN_REDUCED_FILTER_FUZZ : 0; __set_bit(INPUT_PROP_POINTER, dev->propbit); __set_bit(EV_ABS, dev->evbit); input_set_abs_params(dev, ABS_X, - XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0); + priv->x_min ?: XMIN_NOMINAL, + priv->x_max ?: XMAX_NOMINAL, + fuzz, 0); input_set_abs_params(dev, ABS_Y, - YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0); + priv->y_min ?: YMIN_NOMINAL, + priv->y_max ?: YMAX_NOMINAL, + fuzz, 0); input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); input_mt_init_slots(dev, 2); - input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL, - priv->x_max ?: XMAX_NOMINAL, 0, 0); - input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL, - priv->y_max ?: YMAX_NOMINAL, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, + priv->x_min ?: XMIN_NOMINAL, + priv->x_max ?: XMAX_NOMINAL, + fuzz, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, + priv->y_min ?: YMIN_NOMINAL, + priv->y_max ?: YMAX_NOMINAL, + fuzz, 0); + + input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res); + input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res); } if (SYN_CAP_PALMDETECT(priv->capabilities)) @@ -971,4 +997,3 @@ bool synaptics_supported(void) } #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */ - diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 7453938bf5e..ca040aa80fa 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -19,7 +19,8 @@ #define SYN_QUE_RESOLUTION 0x08 #define SYN_QUE_EXT_CAPAB 0x09 #define SYN_QUE_EXT_CAPAB_0C 0x0c -#define SYN_QUE_EXT_DIMENSIONS 0x0d +#define SYN_QUE_EXT_MAX_COORDS 0x0d +#define SYN_QUE_EXT_MIN_COORDS 0x0f /* synatics modes */ #define SYN_BIT_ABSOLUTE_MODE (1 << 7) @@ -66,18 +67,21 @@ * 1 0x60 multifinger mode identifies firmware finger counting * (not reporting!) algorithm. * Not particularly meaningful - * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered - * 2 0x01 clickpad bit 1 2-button ClickPad - * 2 0x02 deluxe LED controls touchpad support LED commands + * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered + * 2 0x01 clickpad bit 1 2-button ClickPad + * 2 0x02 deluxe LED controls touchpad support LED commands * ala multimedia control bar * 2 0x04 reduced filtering firmware does less filtering on * position data, driver should watch * for noise. + * 2 0x20 report min query 0x0f gives min coord reported */ #define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ #define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ #define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) +#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x002000) #define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000) +#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400) /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) @@ -104,6 +108,9 @@ #define SYN_NEWABS_RELAXED 2 #define SYN_OLDABS 3 +/* amount to fuzz position data when touchpad reports reduced filtering */ +#define SYN_REDUCED_FILTER_FUZZ 8 + /* * A structure to describe the state of the touchpad hardware (buttons and pad) */ @@ -130,7 +137,8 @@ struct synaptics_data { unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */ unsigned long int identity; /* Identification */ unsigned int x_res, y_res; /* X/Y resolution in units/mm */ - unsigned int x_max, y_max; /* Max dimensions (from FW) */ + unsigned int x_max, y_max; /* Max coordinates (from FW) */ + unsigned int x_min, y_min; /* Min coordinates (from FW) */ unsigned char pkt_type; /* packet type - old, new, etc */ unsigned char mode; /* current mode byte */ diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c index 6ee8f0ddad5..95280f9207e 100644 --- a/drivers/input/serio/at32psif.c +++ b/drivers/input/serio/at32psif.c @@ -372,6 +372,6 @@ static void __exit psif_exit(void) module_init(psif_init); module_exit(psif_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>"); +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 42206205e4f..979c443bf1e 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -795,7 +795,7 @@ int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback) /************************* Keepalive timer task *********************/ -void hp_sdc_kicker (unsigned long data) +static void hp_sdc_kicker(unsigned long data) { tasklet_schedule(&hp_sdc.task); /* Re-insert the periodic task. */ diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 980af94ba9c..07a8363f3c5 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -210,7 +210,7 @@ int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) /* * Some devices (Synaptics) peform the reset before * ACKing the reset command, and so it can take a long - * time before the ACK arrrives. + * time before the ACK arrives. */ if (ps2_sendbyte(ps2dev, command & 0xff, command == PS2_CMD_RESET_BAT ? 1000 : 200)) diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index d55874e5d1c..44fc8b4bcd8 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -300,8 +300,7 @@ static int __devinit ps2_probe(struct sa1111_dev *dev) out: sa1111_disable_device(ps2if->dev); - release_mem_region(dev->res.start, - dev->res.end - dev->res.start + 1); + release_mem_region(dev->res.start, resource_size(&dev->res)); free: sa1111_set_drvdata(dev, NULL); kfree(ps2if); @@ -317,8 +316,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev) struct ps2if *ps2if = sa1111_get_drvdata(dev); serio_unregister_port(ps2if->io); - release_mem_region(dev->res.start, - dev->res.end - dev->res.start + 1); + release_mem_region(dev->res.start, resource_size(&dev->res)); sa1111_set_drvdata(dev, NULL); kfree(ps2if); diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c index 80baa53da5b..d64c5a43aaa 100644 --- a/drivers/input/serio/xilinx_ps2.c +++ b/drivers/input/serio/xilinx_ps2.c @@ -23,7 +23,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> - +#include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_platform.h> diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 0a619c558bf..6d89fd1842c 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -225,7 +225,6 @@ /* toolMode codes */ #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN -#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN #define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL #define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH #define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 08ba5ad9c9b..03ebcc8b24b 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -15,6 +15,7 @@ #include "wacom_wac.h" #include "wacom.h" #include <linux/input/mt.h> +#include <linux/hid.h> /* resolution for penabled devices */ #define WACOM_PL_RES 20 @@ -264,6 +265,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) wacom->id[0] = 0; input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ input_report_key(input, wacom->tool[0], prox); + input_event(input, EV_MSC, MSC_SERIAL, 1); input_sync(input); /* sync last event */ } @@ -273,11 +275,10 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) prox = data[7] & 0xf8; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; - input_report_key(input, BTN_0, (data[7] & 0x40)); - input_report_key(input, BTN_4, (data[7] & 0x80)); + input_report_key(input, BTN_BACK, (data[7] & 0x40)); + input_report_key(input, BTN_FORWARD, (data[7] & 0x80)); rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); input_report_rel(input, REL_WHEEL, rw); - input_report_key(input, BTN_TOOL_FINGER, 0xf0); if (!prox) wacom->id[1] = 0; input_report_abs(input, ABS_MISC, wacom->id[1]); @@ -290,18 +291,17 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) prox = (data[7] & 0xf8) || data[8]; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; - input_report_key(input, BTN_0, (data[7] & 0x08)); - input_report_key(input, BTN_1, (data[7] & 0x20)); - input_report_key(input, BTN_4, (data[7] & 0x10)); - input_report_key(input, BTN_5, (data[7] & 0x40)); + input_report_key(input, BTN_BACK, (data[7] & 0x08)); + input_report_key(input, BTN_LEFT, (data[7] & 0x20)); + input_report_key(input, BTN_FORWARD, (data[7] & 0x10)); + input_report_key(input, BTN_RIGHT, (data[7] & 0x40)); input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f)); - input_report_key(input, BTN_TOOL_FINGER, 0xf0); if (!prox) wacom->id[1] = 0; input_report_abs(input, ABS_MISC, wacom->id[1]); input_event(input, EV_MSC, MSC_SERIAL, 0xf0); + retval = 1; } - retval = 1; break; } exit: @@ -494,10 +494,6 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) /* pad packets. Works as a second tool and is always in prox */ if (data[0] == WACOM_REPORT_INTUOSPAD) { - /* initiate the pad as a device */ - if (wacom->tool[1] != BTN_TOOL_FINGER) - wacom->tool[1] = BTN_TOOL_FINGER; - if (features->type >= INTUOS4S && features->type <= INTUOS4L) { input_report_key(input, BTN_0, (data[2] & 0x01)); input_report_key(input, BTN_1, (data[3] & 0x01)); @@ -1080,18 +1076,14 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, switch (wacom_wac->features.type) { case WACOM_MO: - __set_bit(BTN_1, input_dev->keybit); - __set_bit(BTN_5, input_dev->keybit); - input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); /* fall through */ case WACOM_G4: input_set_capability(input_dev, EV_MSC, MSC_SERIAL); - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); - __set_bit(BTN_0, input_dev->keybit); - __set_bit(BTN_4, input_dev->keybit); + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); /* fall through */ case GRAPHIRE: @@ -1127,10 +1119,12 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case CINTIQ: for (i = 0; i < 8; i++) __set_bit(BTN_0 + i, input_dev->keybit); - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + if (wacom_wac->features.type != WACOM_21UX2) { + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + } + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_cintiq(wacom_wac); break; @@ -1151,8 +1145,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_2, input_dev->keybit); __set_bit(BTN_3, input_dev->keybit); - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); /* fall through */ @@ -1170,7 +1162,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case INTUOS4S: for (i = 0; i < 7; i++) __set_bit(BTN_0 + i, input_dev->keybit); - __set_bit(BTN_TOOL_FINGER, input_dev->keybit); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_intuos(wacom_wac); @@ -1295,6 +1286,12 @@ static const struct wacom_features wacom_features_0x65 = static const struct wacom_features wacom_features_0x69 = { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; +static const struct wacom_features wacom_features_0x6A = + { "Wacom Bamboo1 4x6", WACOM_PKGLEN_GRAPHIRE, 14760, 9225, 1023, + 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x6B = + { "Wacom Bamboo1 5x8", WACOM_PKGLEN_GRAPHIRE, 21648, 13530, 1023, + 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x20 = { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1427,6 +1424,9 @@ static const struct wacom_features wacom_features_0x90 = static const struct wacom_features wacom_features_0x93 = { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x97 = + { "Wacom ISDv4 97", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 511, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9A = { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1458,7 +1458,7 @@ static const struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD4 = - { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, + { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, @@ -1483,6 +1483,11 @@ static const struct wacom_features wacom_features_0x6004 = USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ .driver_info = (kernel_ulong_t)&wacom_features_##prod +#define USB_DEVICE_DETAILED(prod, class, sub, proto) \ + USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_WACOM, prod, class, \ + sub, proto), \ + .driver_info = (kernel_ulong_t)&wacom_features_##prod + #define USB_DEVICE_LENOVO(prod) \ USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ .driver_info = (kernel_ulong_t)&wacom_features_##prod @@ -1506,6 +1511,8 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x64) }, { USB_DEVICE_WACOM(0x65) }, { USB_DEVICE_WACOM(0x69) }, + { USB_DEVICE_WACOM(0x6A) }, + { USB_DEVICE_WACOM(0x6B) }, { USB_DEVICE_WACOM(0x20) }, { USB_DEVICE_WACOM(0x21) }, { USB_DEVICE_WACOM(0x22) }, @@ -1545,7 +1552,13 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xC5) }, { USB_DEVICE_WACOM(0xC6) }, { USB_DEVICE_WACOM(0xC7) }, - { USB_DEVICE_WACOM(0xCE) }, + /* + * DTU-2231 has two interfaces on the same configuration, + * only one is used. + */ + { USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID, + USB_INTERFACE_SUBCLASS_BOOT, + USB_INTERFACE_PROTOCOL_MOUSE) }, { USB_DEVICE_WACOM(0xD0) }, { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, @@ -1560,6 +1573,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0x90) }, { USB_DEVICE_WACOM(0x93) }, + { USB_DEVICE_WACOM(0x97) }, { USB_DEVICE_WACOM(0x9A) }, { USB_DEVICE_WACOM(0x9F) }, { USB_DEVICE_WACOM(0xE2) }, diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index bc3b5187f3a..131f9d1c921 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -249,12 +249,14 @@ static void __ad7879_enable(struct ad7879 *ts) static void __ad7879_disable(struct ad7879 *ts) { + u16 reg = (ts->cmd_crtl2 & ~AD7879_PM(-1)) | + AD7879_PM(AD7879_PM_SHUTDOWN); disable_irq(ts->irq); if (del_timer_sync(&ts->timer)) ad7879_ts_event_release(ts); - ad7879_write(ts, AD7879_REG_CTRL2, AD7879_PM(AD7879_PM_SHUTDOWN)); + ad7879_write(ts, AD7879_REG_CTRL2, reg); } diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 5196861b86e..d507b9b6780 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -967,17 +967,12 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784 ts->get_pendown_state = pdata->get_pendown_state; } else if (gpio_is_valid(pdata->gpio_pendown)) { - err = gpio_request(pdata->gpio_pendown, "ads7846_pendown"); + err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN, + "ads7846_pendown"); if (err) { - dev_err(&spi->dev, "failed to request pendown GPIO%d\n", - pdata->gpio_pendown); - return err; - } - err = gpio_direction_input(pdata->gpio_pendown); - if (err) { - dev_err(&spi->dev, "failed to setup pendown GPIO%d\n", - pdata->gpio_pendown); - gpio_free(pdata->gpio_pendown); + dev_err(&spi->dev, + "failed to request/setup pendown GPIO%d: %d\n", + pdata->gpio_pendown, err); return err; } diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index fa8e56bd909..8034cbb20f7 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -164,7 +164,7 @@ static irqreturn_t atmel_wm97xx_channel_b_interrupt(int irq, void *dev_id) data = ac97c_readl(atmel_wm97xx, CBRHR); value = data & 0x0fff; - source = data & WM97XX_ADCSRC_MASK; + source = data & WM97XX_ADCSEL_MASK; pen_down = (data & WM97XX_PEN_DOWN) >> 8; if (source == WM97XX_ADCSEL_X) @@ -442,6 +442,6 @@ static void __exit atmel_wm97xx_exit(void) } module_exit(atmel_wm97xx_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>"); +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 1e61387c73c..ae00604a6a8 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -48,41 +48,47 @@ #define MXT_OBJECT_SIZE 6 /* Object types */ -#define MXT_DEBUG_DIAGNOSTIC 37 -#define MXT_GEN_MESSAGE 5 -#define MXT_GEN_COMMAND 6 -#define MXT_GEN_POWER 7 -#define MXT_GEN_ACQUIRE 8 -#define MXT_TOUCH_MULTI 9 -#define MXT_TOUCH_KEYARRAY 15 -#define MXT_TOUCH_PROXIMITY 23 -#define MXT_PROCI_GRIPFACE 20 -#define MXT_PROCG_NOISE 22 -#define MXT_PROCI_ONETOUCH 24 -#define MXT_PROCI_TWOTOUCH 27 -#define MXT_PROCI_GRIP 40 -#define MXT_PROCI_PALM 41 -#define MXT_SPT_COMMSCONFIG 18 -#define MXT_SPT_GPIOPWM 19 -#define MXT_SPT_SELFTEST 25 -#define MXT_SPT_CTECONFIG 28 -#define MXT_SPT_USERDATA 38 -#define MXT_SPT_DIGITIZER 43 -#define MXT_SPT_MESSAGECOUNT 44 - -/* MXT_GEN_COMMAND field */ +#define MXT_DEBUG_DIAGNOSTIC_T37 37 +#define MXT_GEN_MESSAGE_T5 5 +#define MXT_GEN_COMMAND_T6 6 +#define MXT_GEN_POWER_T7 7 +#define MXT_GEN_ACQUIRE_T8 8 +#define MXT_GEN_DATASOURCE_T53 53 +#define MXT_TOUCH_MULTI_T9 9 +#define MXT_TOUCH_KEYARRAY_T15 15 +#define MXT_TOUCH_PROXIMITY_T23 23 +#define MXT_TOUCH_PROXKEY_T52 52 +#define MXT_PROCI_GRIPFACE_T20 20 +#define MXT_PROCG_NOISE_T22 22 +#define MXT_PROCI_ONETOUCH_T24 24 +#define MXT_PROCI_TWOTOUCH_T27 27 +#define MXT_PROCI_GRIP_T40 40 +#define MXT_PROCI_PALM_T41 41 +#define MXT_PROCI_TOUCHSUPPRESSION_T42 42 +#define MXT_PROCI_STYLUS_T47 47 +#define MXT_PROCG_NOISESUPPRESSION_T48 48 +#define MXT_SPT_COMMSCONFIG_T18 18 +#define MXT_SPT_GPIOPWM_T19 19 +#define MXT_SPT_SELFTEST_T25 25 +#define MXT_SPT_CTECONFIG_T28 28 +#define MXT_SPT_USERDATA_T38 38 +#define MXT_SPT_DIGITIZER_T43 43 +#define MXT_SPT_MESSAGECOUNT_T44 44 +#define MXT_SPT_CTECONFIG_T46 46 + +/* MXT_GEN_COMMAND_T6 field */ #define MXT_COMMAND_RESET 0 #define MXT_COMMAND_BACKUPNV 1 #define MXT_COMMAND_CALIBRATE 2 #define MXT_COMMAND_REPORTALL 3 #define MXT_COMMAND_DIAGNOSTIC 5 -/* MXT_GEN_POWER field */ +/* MXT_GEN_POWER_T7 field */ #define MXT_POWER_IDLEACQINT 0 #define MXT_POWER_ACTVACQINT 1 #define MXT_POWER_ACTV2IDLETO 2 -/* MXT_GEN_ACQUIRE field */ +/* MXT_GEN_ACQUIRE_T8 field */ #define MXT_ACQUIRE_CHRGTIME 0 #define MXT_ACQUIRE_TCHDRIFT 2 #define MXT_ACQUIRE_DRIFTST 3 @@ -91,7 +97,7 @@ #define MXT_ACQUIRE_ATCHCALST 6 #define MXT_ACQUIRE_ATCHCALSTHR 7 -/* MXT_TOUCH_MULTI field */ +/* MXT_TOUCH_MULTI_T9 field */ #define MXT_TOUCH_CTRL 0 #define MXT_TOUCH_XORIGIN 1 #define MXT_TOUCH_YORIGIN 2 @@ -121,7 +127,7 @@ #define MXT_TOUCH_YEDGEDIST 29 #define MXT_TOUCH_JUMPLIMIT 30 -/* MXT_PROCI_GRIPFACE field */ +/* MXT_PROCI_GRIPFACE_T20 field */ #define MXT_GRIPFACE_CTRL 0 #define MXT_GRIPFACE_XLOGRIP 1 #define MXT_GRIPFACE_XHIGRIP 2 @@ -151,11 +157,11 @@ #define MXT_NOISE_FREQ4 15 #define MXT_NOISE_IDLEGCAFVALID 16 -/* MXT_SPT_COMMSCONFIG */ +/* MXT_SPT_COMMSCONFIG_T18 */ #define MXT_COMMS_CTRL 0 #define MXT_COMMS_CMD 1 -/* MXT_SPT_CTECONFIG field */ +/* MXT_SPT_CTECONFIG_T28 field */ #define MXT_CTE_CTRL 0 #define MXT_CTE_CMD 1 #define MXT_CTE_MODE 2 @@ -166,7 +172,7 @@ #define MXT_VOLTAGE_DEFAULT 2700000 #define MXT_VOLTAGE_STEP 10000 -/* Define for MXT_GEN_COMMAND */ +/* Define for MXT_GEN_COMMAND_T6 */ #define MXT_BOOT_VALUE 0xa5 #define MXT_BACKUP_VALUE 0x55 #define MXT_BACKUP_TIME 25 /* msec */ @@ -256,24 +262,31 @@ struct mxt_data { static bool mxt_object_readable(unsigned int type) { switch (type) { - case MXT_GEN_MESSAGE: - case MXT_GEN_COMMAND: - case MXT_GEN_POWER: - case MXT_GEN_ACQUIRE: - case MXT_TOUCH_MULTI: - case MXT_TOUCH_KEYARRAY: - case MXT_TOUCH_PROXIMITY: - case MXT_PROCI_GRIPFACE: - case MXT_PROCG_NOISE: - case MXT_PROCI_ONETOUCH: - case MXT_PROCI_TWOTOUCH: - case MXT_PROCI_GRIP: - case MXT_PROCI_PALM: - case MXT_SPT_COMMSCONFIG: - case MXT_SPT_GPIOPWM: - case MXT_SPT_SELFTEST: - case MXT_SPT_CTECONFIG: - case MXT_SPT_USERDATA: + case MXT_GEN_MESSAGE_T5: + case MXT_GEN_COMMAND_T6: + case MXT_GEN_POWER_T7: + case MXT_GEN_ACQUIRE_T8: + case MXT_GEN_DATASOURCE_T53: + case MXT_TOUCH_MULTI_T9: + case MXT_TOUCH_KEYARRAY_T15: + case MXT_TOUCH_PROXIMITY_T23: + case MXT_TOUCH_PROXKEY_T52: + case MXT_PROCI_GRIPFACE_T20: + case MXT_PROCG_NOISE_T22: + case MXT_PROCI_ONETOUCH_T24: + case MXT_PROCI_TWOTOUCH_T27: + case MXT_PROCI_GRIP_T40: + case MXT_PROCI_PALM_T41: + case MXT_PROCI_TOUCHSUPPRESSION_T42: + case MXT_PROCI_STYLUS_T47: + case MXT_PROCG_NOISESUPPRESSION_T48: + case MXT_SPT_COMMSCONFIG_T18: + case MXT_SPT_GPIOPWM_T19: + case MXT_SPT_SELFTEST_T25: + case MXT_SPT_CTECONFIG_T28: + case MXT_SPT_USERDATA_T38: + case MXT_SPT_DIGITIZER_T43: + case MXT_SPT_CTECONFIG_T46: return true; default: return false; @@ -283,21 +296,28 @@ static bool mxt_object_readable(unsigned int type) static bool mxt_object_writable(unsigned int type) { switch (type) { - case MXT_GEN_COMMAND: - case MXT_GEN_POWER: - case MXT_GEN_ACQUIRE: - case MXT_TOUCH_MULTI: - case MXT_TOUCH_KEYARRAY: - case MXT_TOUCH_PROXIMITY: - case MXT_PROCI_GRIPFACE: - case MXT_PROCG_NOISE: - case MXT_PROCI_ONETOUCH: - case MXT_PROCI_TWOTOUCH: - case MXT_PROCI_GRIP: - case MXT_PROCI_PALM: - case MXT_SPT_GPIOPWM: - case MXT_SPT_SELFTEST: - case MXT_SPT_CTECONFIG: + case MXT_GEN_COMMAND_T6: + case MXT_GEN_POWER_T7: + case MXT_GEN_ACQUIRE_T8: + case MXT_TOUCH_MULTI_T9: + case MXT_TOUCH_KEYARRAY_T15: + case MXT_TOUCH_PROXIMITY_T23: + case MXT_TOUCH_PROXKEY_T52: + case MXT_PROCI_GRIPFACE_T20: + case MXT_PROCG_NOISE_T22: + case MXT_PROCI_ONETOUCH_T24: + case MXT_PROCI_TWOTOUCH_T27: + case MXT_PROCI_GRIP_T40: + case MXT_PROCI_PALM_T41: + case MXT_PROCI_TOUCHSUPPRESSION_T42: + case MXT_PROCI_STYLUS_T47: + case MXT_PROCG_NOISESUPPRESSION_T48: + case MXT_SPT_COMMSCONFIG_T18: + case MXT_SPT_GPIOPWM_T19: + case MXT_SPT_SELFTEST_T25: + case MXT_SPT_CTECONFIG_T28: + case MXT_SPT_DIGITIZER_T43: + case MXT_SPT_CTECONFIG_T46: return true; default: return false; @@ -455,7 +475,7 @@ static int mxt_read_message(struct mxt_data *data, struct mxt_object *object; u16 reg; - object = mxt_get_object(data, MXT_GEN_MESSAGE); + object = mxt_get_object(data, MXT_GEN_MESSAGE_T5); if (!object) return -EINVAL; @@ -597,8 +617,8 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id) reportid = message.reportid; - /* whether reportid is thing of MXT_TOUCH_MULTI */ - object = mxt_get_object(data, MXT_TOUCH_MULTI); + /* whether reportid is thing of MXT_TOUCH_MULTI_T9 */ + object = mxt_get_object(data, MXT_TOUCH_MULTI_T9); if (!object) goto end; @@ -635,7 +655,9 @@ static int mxt_check_reg_init(struct mxt_data *data) if (!mxt_object_writable(object->type)) continue; - for (j = 0; j < object->size + 1; j++) { + for (j = 0; + j < (object->size + 1) * (object->instances + 1); + j++) { config_offset = index + j; if (config_offset > pdata->config_length) { dev_err(dev, "Not enough config data!\n"); @@ -644,7 +666,7 @@ static int mxt_check_reg_init(struct mxt_data *data) mxt_write_object(data, object->type, j, pdata->config[config_offset]); } - index += object->size + 1; + index += (object->size + 1) * (object->instances + 1); } return 0; @@ -678,31 +700,31 @@ static void mxt_handle_pdata(struct mxt_data *data) u8 voltage; /* Set touchscreen lines */ - mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_XSIZE, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE, pdata->x_line); - mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_YSIZE, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE, pdata->y_line); /* Set touchscreen orient */ - mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_ORIENT, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT, pdata->orient); /* Set touchscreen burst length */ - mxt_write_object(data, MXT_TOUCH_MULTI, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_BLEN, pdata->blen); /* Set touchscreen threshold */ - mxt_write_object(data, MXT_TOUCH_MULTI, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_TCHTHR, pdata->threshold); /* Set touchscreen resolution */ - mxt_write_object(data, MXT_TOUCH_MULTI, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff); - mxt_write_object(data, MXT_TOUCH_MULTI, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8); - mxt_write_object(data, MXT_TOUCH_MULTI, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff); - mxt_write_object(data, MXT_TOUCH_MULTI, + mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8); /* Set touchscreen voltage */ @@ -715,7 +737,7 @@ static void mxt_handle_pdata(struct mxt_data *data) voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) / MXT_VOLTAGE_STEP; - mxt_write_object(data, MXT_SPT_CTECONFIG, + mxt_write_object(data, MXT_SPT_CTECONFIG_T28, MXT_CTE_VOLTAGE, voltage); } } @@ -819,13 +841,13 @@ static int mxt_initialize(struct mxt_data *data) mxt_handle_pdata(data); /* Backup to memory */ - mxt_write_object(data, MXT_GEN_COMMAND, + mxt_write_object(data, MXT_GEN_COMMAND_T6, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE); msleep(MXT_BACKUP_TIME); /* Soft reset */ - mxt_write_object(data, MXT_GEN_COMMAND, + mxt_write_object(data, MXT_GEN_COMMAND_T6, MXT_COMMAND_RESET, 1); msleep(MXT_RESET_TIME); @@ -921,7 +943,7 @@ static int mxt_load_fw(struct device *dev, const char *fn) } /* Change to the bootloader mode */ - mxt_write_object(data, MXT_GEN_COMMAND, + mxt_write_object(data, MXT_GEN_COMMAND_T6, MXT_COMMAND_RESET, MXT_BOOT_VALUE); msleep(MXT_RESET_TIME); @@ -1027,14 +1049,14 @@ static void mxt_start(struct mxt_data *data) { /* Touch enable */ mxt_write_object(data, - MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0x83); + MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); } static void mxt_stop(struct mxt_data *data) { /* Touch disable */ mxt_write_object(data, - MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0); + MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); } static int mxt_input_open(struct input_dev *dev) @@ -1182,7 +1204,7 @@ static int mxt_resume(struct device *dev) struct input_dev *input_dev = data->input_dev; /* Soft reset */ - mxt_write_object(data, MXT_GEN_COMMAND, + mxt_write_object(data, MXT_GEN_COMMAND_T6, MXT_COMMAND_RESET, 1); msleep(MXT_RESET_TIME); diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index a93c5c26ab3..d8815c5d54a 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -84,9 +84,9 @@ static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg, memcpy(i2c_data + 1, value, len); ret = i2c_master_send(client, i2c_data, len + 1); - if (ret != 1) { + if (ret != len + 1) { dev_err(&client->dev, "i2c write data cmd failed\n"); - return ret ? ret : -EIO; + return ret < 0 ? ret : -EIO; } return 0; @@ -193,6 +193,8 @@ static int __devinit cy8ctmg110_probe(struct i2c_client *client, ts->client = client; ts->input = input_dev; + ts->reset_pin = pdata->reset_pin; + ts->irq_pin = pdata->irq_pin; snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); @@ -328,7 +330,7 @@ static int __devexit cy8ctmg110_remove(struct i2c_client *client) return 0; } -static struct i2c_device_id cy8ctmg110_idtable[] = { +static const struct i2c_device_id cy8ctmg110_idtable[] = { { CY8CTMG110_DRIVER_NAME, 1 }, { } }; diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c index 66c96bfc552..327695268e0 100644 --- a/drivers/input/touchscreen/intel-mid-touch.c +++ b/drivers/input/touchscreen/intel-mid-touch.c @@ -448,15 +448,11 @@ static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) */ static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) { - int err, i, found; + int found = 0; + int err, i; u8 r8; - found = -1; - for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { - if (found >= 0) - break; - err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8); if (err) return err; @@ -466,16 +462,15 @@ static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) break; } } - if (found < 0) - return 0; if (tsdev->vendor == PMIC_VENDOR_FS) { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) + if (found > MRSTOUCH_MAX_CHANNELS - 18) return -ENOSPC; } else { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) + if (found > MRSTOUCH_MAX_CHANNELS - 4) return -ENOSPC; } + return found; } diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 3242e707625..e966c29ff1b 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -157,9 +157,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) x, y, p); /* are samples valid */ - if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || - (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || - (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES) + if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X || + (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y || + (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES) goto up; /* coordinate is good */ diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c index 22a3411e93c..089b0a0f3d8 100644 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -393,5 +393,5 @@ module_exit(tsc_exit); MODULE_AUTHOR("Cyril Chemparathy"); MODULE_DESCRIPTION("TNETV107X Touchscreen Driver"); -MODULE_ALIAS("platform: tnetv107x-ts"); +MODULE_ALIAS("platform:tnetv107x-ts"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c index 98e61175d3f..adc13a523ab 100644 --- a/drivers/input/touchscreen/wm9705.c +++ b/drivers/input/touchscreen/wm9705.c @@ -215,8 +215,9 @@ static inline int is_pden(struct wm97xx *wm) static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample) { int timeout = 5 * delay; + bool wants_pen = adcsel & WM97XX_PEN_DOWN; - if (!wm->pen_probably_down) { + if (wants_pen && !wm->pen_probably_down) { u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); if (!(data & WM97XX_PEN_DOWN)) return RC_PENUP; @@ -224,13 +225,10 @@ static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample) } /* set up digitiser */ - if (adcsel & 0x8000) - adcsel = ((adcsel & 0x7fff) + 3) << 12; - if (wm->mach_ops && wm->mach_ops->pre_sample) wm->mach_ops->pre_sample(adcsel); - wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, - adcsel | WM97XX_POLL | WM97XX_DELAY(delay)); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK) + | WM97XX_POLL | WM97XX_DELAY(delay)); /* wait 3 AC97 time slots + delay for conversion */ poll_delay(delay); @@ -256,13 +254,14 @@ static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample) wm->mach_ops->post_sample(adcsel); /* check we have correct sample */ - if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) { - dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel, - *sample & WM97XX_ADCSEL_MASK); + if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + adcsel & WM97XX_ADCSEL_MASK, + *sample & WM97XX_ADCSEL_MASK); return RC_PENUP; } - if (!(*sample & WM97XX_PEN_DOWN)) { + if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { wm->pen_probably_down = 0; return RC_PENUP; } @@ -277,14 +276,14 @@ static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) { int rc; - rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x); + rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x); if (rc != RC_VALID) return rc; - rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y); + rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y); if (rc != RC_VALID) return rc; if (pil) { - rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p); + rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p); if (rc != RC_VALID) return rc; } else diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c index 2bc2fb80100..6e743e3dfda 100644 --- a/drivers/input/touchscreen/wm9712.c +++ b/drivers/input/touchscreen/wm9712.c @@ -255,8 +255,9 @@ static inline int is_pden(struct wm97xx *wm) static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) { int timeout = 5 * delay; + bool wants_pen = adcsel & WM97XX_PEN_DOWN; - if (!wm->pen_probably_down) { + if (wants_pen && !wm->pen_probably_down) { u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); if (!(data & WM97XX_PEN_DOWN)) return RC_PENUP; @@ -264,13 +265,10 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) } /* set up digitiser */ - if (adcsel & 0x8000) - adcsel = ((adcsel & 0x7fff) + 3) << 12; - if (wm->mach_ops && wm->mach_ops->pre_sample) wm->mach_ops->pre_sample(adcsel); - wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, - adcsel | WM97XX_POLL | WM97XX_DELAY(delay)); + wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK) + | WM97XX_POLL | WM97XX_DELAY(delay)); /* wait 3 AC97 time slots + delay for conversion */ poll_delay(delay); @@ -296,13 +294,14 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) wm->mach_ops->post_sample(adcsel); /* check we have correct sample */ - if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) { - dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel, - *sample & WM97XX_ADCSEL_MASK); + if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + adcsel & WM97XX_ADCSEL_MASK, + *sample & WM97XX_ADCSEL_MASK); return RC_PENUP; } - if (!(*sample & WM97XX_PEN_DOWN)) { + if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { wm->pen_probably_down = 0; return RC_PENUP; } @@ -387,16 +386,18 @@ static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) if (rc != RC_VALID) return rc; } else { - rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x); + rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, + &data->x); if (rc != RC_VALID) return rc; - rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y); + rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, + &data->y); if (rc != RC_VALID) return rc; if (pil && !five_wire) { - rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES, + rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p); if (rc != RC_VALID) return rc; diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c index 73ec99568f1..7405353199d 100644 --- a/drivers/input/touchscreen/wm9713.c +++ b/drivers/input/touchscreen/wm9713.c @@ -261,8 +261,9 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample) { u16 dig1; int timeout = 5 * delay; + bool wants_pen = adcsel & WM97XX_PEN_DOWN; - if (!wm->pen_probably_down) { + if (wants_pen && !wm->pen_probably_down) { u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); if (!(data & WM97XX_PEN_DOWN)) return RC_PENUP; @@ -270,15 +271,14 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample) } /* set up digitiser */ - if (adcsel & 0x8000) - adcsel = 1 << ((adcsel & 0x7fff) + 3); - dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1); dig1 &= ~WM9713_ADCSEL_MASK; + /* WM97XX_ADCSEL_* channels need to be converted to WM9713 format */ + dig1 |= 1 << ((adcsel & WM97XX_ADCSEL_MASK) >> 12); if (wm->mach_ops && wm->mach_ops->pre_sample) wm->mach_ops->pre_sample(adcsel); - wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel | WM9713_POLL); + wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | WM9713_POLL); /* wait 3 AC97 time slots + delay for conversion */ poll_delay(delay); @@ -304,13 +304,14 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample) wm->mach_ops->post_sample(adcsel); /* check we have correct sample */ - if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) { - dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel, - *sample & WM97XX_ADCSRC_MASK); + if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + adcsel & WM97XX_ADCSEL_MASK, + *sample & WM97XX_ADCSEL_MASK); return RC_PENUP; } - if (!(*sample & WM97XX_PEN_DOWN)) { + if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { wm->pen_probably_down = 0; return RC_PENUP; } @@ -400,14 +401,14 @@ static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data) if (rc != RC_VALID) return rc; } else { - rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x); + rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x); if (rc != RC_VALID) return rc; - rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y); + rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y); if (rc != RC_VALID) return rc; if (pil) { - rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES, + rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p); if (rc != RC_VALID) return rc; diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index 5b0f15ec874..f6328c0cded 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -122,9 +122,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) x, y, p); /* are samples valid */ - if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || - (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || - (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES) + if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X || + (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y || + (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES) goto up; /* coordinate is good */ |