summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/evdev.c1
-rw-r--r--drivers/input/input.c9
-rw-r--r--drivers/input/joydev.c1
-rw-r--r--drivers/input/keyboard/atkbd.c2
-rw-r--r--drivers/input/keyboard/hilkbd.c1
-rw-r--r--drivers/input/keyboard/omap-keypad.c22
-rw-r--r--drivers/input/keyboard/sh_keysc.c3
-rw-r--r--drivers/input/keyboard/sunkbd.c1
-rw-r--r--drivers/input/misc/Kconfig37
-rw-r--r--drivers/input/misc/Makefile4
-rw-r--r--drivers/input/misc/pcap_keys.c144
-rw-r--r--drivers/input/misc/uinput.c1
-rw-r--r--drivers/input/misc/winbond-cir.c1614
-rw-r--r--drivers/input/misc/wm831x-on.c163
-rw-r--r--drivers/input/mousedev.c1
-rw-r--r--drivers/input/serio/libps2.c1
-rw-r--r--drivers/input/serio/serio_raw.c1
-rw-r--r--drivers/input/serio/serport.c1
-rw-r--r--drivers/input/touchscreen/Kconfig9
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/ad7877.c1
-rw-r--r--drivers/input/touchscreen/ad7879.c1
-rw-r--r--drivers/input/touchscreen/ads7846.c1
-rw-r--r--drivers/input/touchscreen/pcap_ts.c271
-rw-r--r--drivers/input/touchscreen/wm97xx-core.c3
25 files changed, 2278 insertions, 16 deletions
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 1148140d08a..dee6706038a 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -13,6 +13,7 @@
#define EVDEV_BUFFER_SIZE 64
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 60a4eaabb7d..cc763c96fad 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -17,6 +17,7 @@
#include <linux/random.h>
#include <linux/major.h>
#include <linux/proc_fs.h>
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/poll.h>
#include <linux/device.h>
@@ -1176,7 +1177,7 @@ static struct attribute_group input_dev_caps_attr_group = {
.attrs = input_dev_caps_attrs,
};
-static struct attribute_group *input_dev_attr_groups[] = {
+static const struct attribute_group *input_dev_attr_groups[] = {
&input_dev_attr_group,
&input_dev_id_attr_group,
&input_dev_caps_attr_group,
@@ -1304,6 +1305,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
} \
} while (0)
+#ifdef CONFIG_PM
static void input_dev_reset(struct input_dev *dev, bool activate)
{
if (!dev->event)
@@ -1318,7 +1320,6 @@ static void input_dev_reset(struct input_dev *dev, bool activate)
}
}
-#ifdef CONFIG_PM
static int input_dev_suspend(struct device *dev)
{
struct input_dev *input_dev = to_input_dev(dev);
@@ -1358,14 +1359,14 @@ static struct device_type input_dev_type = {
#endif
};
-static char *input_nodename(struct device *dev)
+static char *input_devnode(struct device *dev, mode_t *mode)
{
return kasprintf(GFP_KERNEL, "input/%s", dev_name(dev));
}
struct class input_class = {
.name = "input",
- .nodename = input_nodename,
+ .devnode = input_devnode,
};
EXPORT_SYMBOL_GPL(input_class);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 901b2525993..b1bd6dd3228 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -18,6 +18,7 @@
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/major.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index e9acbe0c9e2..4452eabbee6 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -229,7 +229,7 @@ struct atkbd {
};
/*
- * System-specific ketymap fixup routine
+ * System-specific keymap fixup routine
*/
static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
static void *atkbd_platform_fixup_data;
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index e9d639ec283..5f72440b50c 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/hil.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#ifdef CONFIG_HP300
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 87ec7b18ac6..bba85add35a 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -116,7 +116,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
}
} else
/* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
tasklet_schedule(&kp_tasklet);
@@ -143,20 +143,20 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
} else {
/* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
/* read the keypad status */
- omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+ omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
for (col = 0; col < omap_kp->cols; col++) {
omap_writew(~(1 << col) & 0xff,
- OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+ OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
udelay(omap_kp->delay);
- state[col] = ~omap_readw(OMAP_MPUIO_BASE +
+ state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
OMAP_MPUIO_KBR_LATCH) & 0xff;
}
- omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+ omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
udelay(2);
}
}
@@ -234,7 +234,7 @@ static void omap_kp_tasklet(unsigned long data)
for (i = 0; i < omap_kp_data->rows; i++)
enable_irq(gpio_to_irq(row_gpios[i]));
} else {
- omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
kp_cur_group = -1;
}
}
@@ -317,7 +317,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
/* Disable the interrupt for the MPUIO keyboard */
if (!cpu_is_omap24xx())
- omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
keymap = pdata->keymap;
@@ -391,7 +391,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
}
if (pdata->dbounce)
- omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+ omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
/* scan current status and enable interrupt */
omap_kp_scan_keypad(omap_kp, keypad_state);
@@ -402,7 +402,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
"omap-keypad", omap_kp) < 0)
goto err4;
}
- omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
} else {
for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
@@ -449,7 +449,7 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
free_irq(gpio_to_irq(row_gpios[i]), 0);
}
} else {
- omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
free_irq(omap_kp->irq, 0);
}
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 0714bf2c28f..887af79b7bf 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -80,6 +80,9 @@ static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8),
priv->iomem_base + KYCR2_OFFS);
+ if (pdata->kycr2_delay)
+ udelay(pdata->kycr2_delay);
+
keys ^= ~0;
keys &= (1 << (sh_keysc_mode[pdata->mode].keyin *
sh_keysc_mode[pdata->mode].keyout)) - 1;
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index 472b56639cd..a99a04b03ee 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -27,6 +27,7 @@
*/
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index cbe21bc96b5..02f4f8f1db6 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -222,6 +222,23 @@ config INPUT_SGI_BTNS
To compile this driver as a module, choose M here: the
module will be called sgi_btns.
+config INPUT_WINBOND_CIR
+ tristate "Winbond IR remote control"
+ depends on X86 && PNP
+ select NEW_LEDS
+ select LEDS_CLASS
+ select BITREVERSE
+ help
+ Say Y here if you want to use the IR remote functionality found
+ in some Winbond SuperI/O chips. Currently only the WPCD376I
+ chip is supported (included in some Intel Media series motherboards).
+
+ IR Receive and wake-on-IR from suspend and power-off is currently
+ supported.
+
+ To compile this driver as a module, choose M here: the module will be
+ called winbond_cir.
+
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
depends on (GSC || HP300) && SERIO
@@ -279,4 +296,24 @@ config INPUT_BFIN_ROTARY
To compile this driver as a module, choose M here: the
module will be called bfin-rotary.
+config INPUT_WM831X_ON
+ tristate "WM831X ON pin"
+ depends on MFD_WM831X
+ help
+ Support the ON pin of WM831X PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called wm831x_on.
+
+config INPUT_PCAP
+ tristate "Motorola EZX PCAP misc input events"
+ depends on EZX_PCAP
+ help
+ Say Y here if you want to use Power key and Headphone button
+ on Motorola EZX phones.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcap_keys.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 79c1e9a5ea3..a8b84854fb7 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
+obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
@@ -25,5 +26,8 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
+obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+
diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c
new file mode 100644
index 00000000000..7ea969347ca
--- /dev/null
+++ b/drivers/input/misc/pcap_keys.c
@@ -0,0 +1,144 @@
+/*
+ * Input driver for PCAP events:
+ * * Power key
+ * * Headphone button
+ *
+ * Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_keys {
+ struct pcap_chip *pcap;
+ struct input_dev *input;
+};
+
+/* PCAP2 interrupts us on keypress */
+static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys)
+{
+ struct pcap_keys *pcap_keys = _pcap_keys;
+ int pirq = irq_to_pcap(pcap_keys->pcap, irq);
+ u32 pstat;
+
+ ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat);
+ pstat &= 1 << pirq;
+
+ switch (pirq) {
+ case PCAP_IRQ_ONOFF:
+ input_report_key(pcap_keys->input, KEY_POWER, !pstat);
+ break;
+ case PCAP_IRQ_MIC:
+ input_report_key(pcap_keys->input, KEY_HP, !pstat);
+ break;
+ }
+
+ input_sync(pcap_keys->input);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit pcap_keys_probe(struct platform_device *pdev)
+{
+ int err = -ENOMEM;
+ struct pcap_keys *pcap_keys;
+ struct input_dev *input_dev;
+
+ pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL);
+ if (!pcap_keys)
+ return err;
+
+ pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent);
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ goto fail;
+
+ pcap_keys->input = input_dev;
+
+ platform_set_drvdata(pdev, pcap_keys);
+ input_dev->name = pdev->name;
+ input_dev->phys = "pcap-keys/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->dev.parent = &pdev->dev;
+
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(KEY_POWER, input_dev->keybit);
+ __set_bit(KEY_HP, input_dev->keybit);
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto fail_allocate;
+
+ err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF),
+ pcap_keys_handler, 0, "Power key", pcap_keys);
+ if (err)
+ goto fail_register;
+
+ err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC),
+ pcap_keys_handler, 0, "Headphone button", pcap_keys);
+ if (err)
+ goto fail_pwrkey;
+
+ return 0;
+
+fail_pwrkey:
+ free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
+fail_register:
+ input_unregister_device(input_dev);
+ goto fail;
+fail_allocate:
+ input_free_device(input_dev);
+fail:
+ kfree(pcap_keys);
+ return err;
+}
+
+static int __devexit pcap_keys_remove(struct platform_device *pdev)
+{
+ struct pcap_keys *pcap_keys = platform_get_drvdata(pdev);
+
+ free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
+ free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys);
+
+ input_unregister_device(pcap_keys->input);
+ kfree(pcap_keys);
+
+ return 0;
+}
+
+static struct platform_driver pcap_keys_device_driver = {
+ .probe = pcap_keys_probe,
+ .remove = __devexit_p(pcap_keys_remove),
+ .driver = {
+ .name = "pcap-keys",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init pcap_keys_init(void)
+{
+ return platform_driver_register(&pcap_keys_device_driver);
+};
+
+static void __exit pcap_keys_exit(void)
+{
+ platform_driver_unregister(&pcap_keys_device_driver);
+};
+
+module_init(pcap_keys_init);
+module_exit(pcap_keys_exit);
+
+MODULE_DESCRIPTION("Motorola PCAP2 input events driver");
+MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_keys");
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index c5a49aba418..d3f57245420 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -30,6 +30,7 @@
* - first public version
*/
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
new file mode 100644
index 00000000000..33309fe44e2
--- /dev/null
+++ b/drivers/input/misc/winbond-cir.c
@@ -0,0 +1,1614 @@
+/*
+ * winbond-cir.c - Driver for the Consumer IR functionality of Winbond
+ * SuperI/O chips.
+ *
+ * Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
+ * could probably support others (Winbond WEC102X, NatSemi, etc)
+ * with minor modifications.
+ *
+ * Original Author: David Härdeman <david@hardeman.nu>
+ * Copyright (C) 2009 David Härdeman <david@hardeman.nu>
+ *
+ * Dedicated to Matilda, my newborn daughter, without whose loving attention
+ * this driver would have been finished in half the time and with a fraction
+ * of the bugs.
+ *
+ * Written using:
+ * o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
+ * o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
+ * o DSDT dumps
+ *
+ * Supported features:
+ * o RC6
+ * o Wake-On-CIR functionality
+ *
+ * To do:
+ * o Test NEC and RC5
+ *
+ * Left as an exercise for the reader:
+ * o Learning (I have neither the hardware, nor the need)
+ * o IR Transmit (ibid)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/pci_ids.h>
+#include <linux/io.h>
+#include <linux/bitrev.h>
+#include <linux/bitops.h>
+
+#define DRVNAME "winbond-cir"
+
+/* CEIR Wake-Up Registers, relative to data->wbase */
+#define WBCIR_REG_WCEIR_CTL 0x03 /* CEIR Receiver Control */
+#define WBCIR_REG_WCEIR_STS 0x04 /* CEIR Receiver Status */
+#define WBCIR_REG_WCEIR_EV_EN 0x05 /* CEIR Receiver Event Enable */
+#define WBCIR_REG_WCEIR_CNTL 0x06 /* CEIR Receiver Counter Low */
+#define WBCIR_REG_WCEIR_CNTH 0x07 /* CEIR Receiver Counter High */
+#define WBCIR_REG_WCEIR_INDEX 0x08 /* CEIR Receiver Index */
+#define WBCIR_REG_WCEIR_DATA 0x09 /* CEIR Receiver Data */
+#define WBCIR_REG_WCEIR_CSL 0x0A /* CEIR Re. Compare Strlen */
+#define WBCIR_REG_WCEIR_CFG1 0x0B /* CEIR Re. Configuration 1 */
+#define WBCIR_REG_WCEIR_CFG2 0x0C /* CEIR Re. Configuration 2 */
+
+/* CEIR Enhanced Functionality Registers, relative to data->ebase */
+#define WBCIR_REG_ECEIR_CTS 0x00 /* Enhanced IR Control Status */
+#define WBCIR_REG_ECEIR_CCTL 0x01 /* Infrared Counter Control */
+#define WBCIR_REG_ECEIR_CNT_LO 0x02 /* Infrared Counter LSB */
+#define WBCIR_REG_ECEIR_CNT_HI 0x03 /* Infrared Counter MSB */
+#define WBCIR_REG_ECEIR_IREM 0x04 /* Infrared Emitter Status */
+
+/* SP3 Banked Registers, relative to data->sbase */
+#define WBCIR_REG_SP3_BSR 0x03 /* Bank Select, all banks */
+ /* Bank 0 */
+#define WBCIR_REG_SP3_RXDATA 0x00 /* FIFO RX data (r) */
+#define WBCIR_REG_SP3_TXDATA 0x00 /* FIFO TX data (w) */
+#define WBCIR_REG_SP3_IER 0x01 /* Interrupt Enable */
+#define WBCIR_REG_SP3_EIR 0x02 /* Event Identification (r) */
+#define WBCIR_REG_SP3_FCR 0x02 /* FIFO Control (w) */
+#define WBCIR_REG_SP3_MCR 0x04 /* Mode Control */
+#define WBCIR_REG_SP3_LSR 0x05 /* Link Status */
+#define WBCIR_REG_SP3_MSR 0x06 /* Modem Status */
+#define WBCIR_REG_SP3_ASCR 0x07 /* Aux Status and Control */
+ /* Bank 2 */
+#define WBCIR_REG_SP3_BGDL 0x00 /* Baud Divisor LSB */
+#define WBCIR_REG_SP3_BGDH 0x01 /* Baud Divisor MSB */
+#define WBCIR_REG_SP3_EXCR1 0x02 /* Extended Control 1 */
+#define WBCIR_REG_SP3_EXCR2 0x04 /* Extended Control 2 */
+#define WBCIR_REG_SP3_TXFLV 0x06 /* TX FIFO Level */
+#define WBCIR_REG_SP3_RXFLV 0x07 /* RX FIFO Level */
+ /* Bank 3 */
+#define WBCIR_REG_SP3_MRID 0x00 /* Module Identification */
+#define WBCIR_REG_SP3_SH_LCR 0x01 /* LCR Shadow */
+#define WBCIR_REG_SP3_SH_FCR 0x02 /* FCR Shadow */
+ /* Bank 4 */
+#define WBCIR_REG_SP3_IRCR1 0x02 /* Infrared Control 1 */
+ /* Bank 5 */
+#define WBCIR_REG_SP3_IRCR2 0x04 /* Infrared Control 2 */
+ /* Bank 6 */
+#define WBCIR_REG_SP3_IRCR3 0x00 /* Infrared Control 3 */
+#define WBCIR_REG_SP3_SIR_PW 0x02 /* SIR Pulse Width */
+ /* Bank 7 */
+#define WBCIR_REG_SP3_IRRXDC 0x00 /* IR RX Demod Control */
+#define WBCIR_REG_SP3_IRTXMC 0x01 /* IR TX Mod Control */
+#define WBCIR_REG_SP3_RCCFG 0x02 /* CEIR Config */
+#define WBCIR_REG_SP3_IRCFG1 0x04 /* Infrared Config 1 */
+#define WBCIR_REG_SP3_IRCFG4 0x07 /* Infrared Config 4 */
+
+/*
+ * Magic values follow
+ */
+
+/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_NONE 0x00
+/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_RX 0x01
+/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_ERR 0x04
+/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
+#define WBCIR_LED_ENABLE 0x80
+/* RX data available bit for WBCIR_REG_SP3_LSR */
+#define WBCIR_RX_AVAIL 0x01
+/* RX disable bit for WBCIR_REG_SP3_ASCR */
+#define WBCIR_RX_DISABLE 0x20
+/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
+#define WBCIR_EXT_ENABLE 0x01
+/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
+#define WBCIR_REGSEL_COMPARE 0x10
+/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
+#define WBCIR_REGSEL_MASK 0x20
+/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
+#define WBCIR_REG_ADDR0 0x00
+
+/* Valid banks for the SP3 UART */
+enum wbcir_bank {
+ WBCIR_BANK_0 = 0x00,
+ WBCIR_BANK_1 = 0x80,
+ WBCIR_BANK_2 = 0xE0,
+ WBCIR_BANK_3 = 0xE4,
+ WBCIR_BANK_4 = 0xE8,
+ WBCIR_BANK_5 = 0xEC,
+ WBCIR_BANK_6 = 0xF0,
+ WBCIR_BANK_7 = 0xF4,
+};
+
+/* Supported IR Protocols */
+enum wbcir_protocol {
+ IR_PROTOCOL_RC5 = 0x0,
+ IR_PROTOCOL_NEC = 0x1,
+ IR_PROTOCOL_RC6 = 0x2,
+};
+
+/* Misc */
+#define WBCIR_NAME "Winbond CIR"
+#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */
+#define WBCIR_ID_CHIP 0x04 /* Chip ID for the WPCD376I */
+#define IR_KEYPRESS_TIMEOUT 250 /* FIXME: should be per-protocol? */
+#define INVALID_SCANCODE 0x7FFFFFFF /* Invalid with all protos */
+#define WAKEUP_IOMEM_LEN 0x10 /* Wake-Up I/O Reg Len */
+#define EHFUNC_IOMEM_LEN 0x10 /* Enhanced Func I/O Reg Len */
+#define SP_IOMEM_LEN 0x08 /* Serial Port 3 (IR) Reg Len */
+#define WBCIR_MAX_IDLE_BYTES 10
+
+static DEFINE_SPINLOCK(wbcir_lock);
+static DEFINE_RWLOCK(keytable_lock);
+
+struct wbcir_key {
+ u32 scancode;
+ unsigned int keycode;
+};
+
+struct wbcir_keyentry {
+ struct wbcir_key key;
+ struct list_head list;
+};
+
+static struct wbcir_key rc6_def_keymap[] = {
+ { 0x800F0400, KEY_NUMERIC_0 },
+ { 0x800F0401, KEY_NUMERIC_1 },
+ { 0x800F0402, KEY_NUMERIC_2 },
+ { 0x800F0403, KEY_NUMERIC_3 },
+ { 0x800F0404, KEY_NUMERIC_4 },
+ { 0x800F0405, KEY_NUMERIC_5 },
+ { 0x800F0406, KEY_NUMERIC_6 },
+ { 0x800F0407, KEY_NUMERIC_7 },
+ { 0x800F0408, KEY_NUMERIC_8 },
+ { 0x800F0409, KEY_NUMERIC_9 },
+ { 0x800F041D, KEY_NUMERIC_STAR },
+ { 0x800F041C, KEY_NUMERIC_POUND },
+ { 0x800F0410, KEY_VOLUMEUP },
+ { 0x800F0411, KEY_VOLUMEDOWN },
+ { 0x800F0412, KEY_CHANNELUP },
+ { 0x800F0413, KEY_CHANNELDOWN },
+ { 0x800F040E, KEY_MUTE },
+ { 0x800F040D, KEY_VENDOR }, /* Vista Logo Key */
+ { 0x800F041E, KEY_UP },
+ { 0x800F041F, KEY_DOWN },
+ { 0x800F0420, KEY_LEFT },
+ { 0x800F0421, KEY_RIGHT },
+ { 0x800F0422, KEY_OK },
+ { 0x800F0423, KEY_ESC },
+ { 0x800F040F, KEY_INFO },
+ { 0x800F040A, KEY_CLEAR },
+ { 0x800F040B, KEY_ENTER },
+ { 0x800F045B, KEY_RED },
+ { 0x800F045C, KEY_GREEN },
+ { 0x800F045D, KEY_YELLOW },
+ { 0x800F045E, KEY_BLUE },
+ { 0x800F045A, KEY_TEXT },
+ { 0x800F0427, KEY_SWITCHVIDEOMODE },
+ { 0x800F040C, KEY_POWER },
+ { 0x800F0450, KEY_RADIO },
+ { 0x800F0448, KEY_PVR },
+ { 0x800F0447, KEY_AUDIO },
+ { 0x800F0426, KEY_EPG },
+ { 0x800F0449, KEY_CAMERA },
+ { 0x800F0425, KEY_TV },
+ { 0x800F044A, KEY_VIDEO },
+ { 0x800F0424, KEY_DVD },
+ { 0x800F0416, KEY_PLAY },
+ { 0x800F0418, KEY_PAUSE },
+ { 0x800F0419, KEY_STOP },
+ { 0x800F0414, KEY_FASTFORWARD },
+ { 0x800F041A, KEY_NEXT },
+ { 0x800F041B, KEY_PREVIOUS },
+ { 0x800F0415, KEY_REWIND },
+ { 0x800F0417, KEY_RECORD },
+};
+
+/* Registers and other state is protected by wbcir_lock */
+struct wbcir_data {
+ unsigned long wbase; /* Wake-Up Baseaddr */
+ unsigned long ebase; /* Enhanced Func. Baseaddr */
+ unsigned long sbase; /* Serial Port Baseaddr */
+ unsigned int irq; /* Serial Port IRQ */
+
+ struct input_dev *input_dev;
+ struct timer_list timer_keyup;
+ struct led_trigger *rxtrigger;
+ struct led_trigger *txtrigger;
+ struct led_classdev led;
+
+ u32 last_scancode;
+ unsigned int last_keycode;
+ u8 last_toggle;
+ u8 keypressed;
+ unsigned long keyup_jiffies;
+ unsigned int idle_count;
+
+ /* RX irdata and parsing state */
+ unsigned long irdata[30];
+ unsigned int irdata_count;
+ unsigned int irdata_idle;
+ unsigned int irdata_off;
+ unsigned int irdata_error;
+
+ /* Protected by keytable_lock */
+ struct list_head keytable;
+};
+
+static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
+module_param(protocol, uint, 0444);
+MODULE_PARM_DESC(protocol, "IR protocol to use "
+ "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
+
+static int invert; /* default = 0 */
+module_param(invert, bool, 0444);
+MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
+
+static unsigned int wake_sc = 0x800F040C;
+module_param(wake_sc, uint, 0644);
+MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
+
+static unsigned int wake_rc6mode = 6;
+module_param(wake_rc6mode, uint, 0644);
+MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
+ "(0 = 0, 6 = 6A, default)");
+
+
+
+/*****************************************************************************
+ *
+ * UTILITY FUNCTIONS
+ *
+ *****************************************************************************/
+
+/* Caller needs to hold wbcir_lock */
+static void
+wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
+{
+ u8 val;
+
+ val = inb(addr);
+ val = ((val & ~mask) | (bits & mask));
+ outb(val, addr);
+}
+
+/* Selects the register bank for the serial port */
+static inline void
+wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
+{
+ outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
+}
+
+static enum led_brightness
+wbcir_led_brightness_get(struct led_classdev *led_cdev)
+{
+ struct wbcir_data *data = container_of(led_cdev,
+ struct wbcir_data,
+ led);
+
+ if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
+ return LED_FULL;
+ else
+ return LED_OFF;
+}
+
+static void
+wbcir_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct wbcir_data *data = container_of(led_cdev,
+ struct wbcir_data,
+ led);
+
+ wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
+ brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
+ WBCIR_LED_ENABLE);
+}
+
+/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
+static u8
+wbcir_to_rc6cells(u8 val)
+{
+ u8 coded = 0x00;
+ int i;
+
+ val &= 0x0F;
+ for (i = 0; i < 4; i++) {
+ if (val & 0x01)
+ coded |= 0x02 << (i * 2);
+ else
+ coded |= 0x01 << (i * 2);
+ val >>= 1;
+ }
+
+ return coded;
+}
+
+
+
+/*****************************************************************************
+ *
+ * INPUT FUNCTIONS
+ *
+ *****************************************************************************/
+
+static unsigned int
+wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
+{
+ struct wbcir_keyentry *keyentry;
+ unsigned int keycode = KEY_RESERVED;
+ unsigned long flags;
+
+ read_lock_irqsave(&keytable_lock, flags);
+
+ list_for_each_entry(keyentry, &data->keytable, list) {
+ if (keyentry->key.scancode == scancode) {
+ keycode = keyentry->key.keycode;
+ break;
+ }
+ }
+
+ read_unlock_irqrestore(&keytable_lock, flags);
+ return keycode;
+}
+
+static int
+wbcir_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+ struct wbcir_data *data = input_get_drvdata(dev);
+
+ *keycode = (int)wbcir_do_getkeycode(data, (u32)scancode);
+ return 0;
+}
+
+static int
+wbcir_setkeycode(struct input_dev *dev, int sscancode, int keycode)
+{
+ struct wbcir_data *data = input_get_drvdata(dev);
+ struct wbcir_keyentry *keyentry;
+ struct wbcir_keyentry *new_keyentry;
+ unsigned long flags;
+ unsigned int old_keycode = KEY_RESERVED;
+ u32 scancode = (u32)sscancode;
+
+ if (keycode < 0 || keycode > KEY_MAX)
+ return -EINVAL;
+
+ new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
+ if (!new_keyentry)
+ return -ENOMEM;
+
+ write_lock_irqsave(&keytable_lock, flags);
+
+ list_for_each_entry(keyentry, &data->keytable, list) {
+ if (keyentry->key.scancode != scancode)
+ continue;
+
+ old_keycode = keyentry->key.keycode;
+ keyentry->key.keycode = keycode;
+
+ if (keyentry->key.keycode == KEY_RESERVED) {
+ list_del(&keyentry->list);
+ kfree(keyentry);
+ }
+
+ break;
+ }
+
+ set_bit(keycode, dev->keybit);
+
+ if (old_keycode == KEY_RESERVED) {
+ new_keyentry->key.scancode = scancode;
+ new_keyentry->key.keycode = keycode;
+ list_add(&new_keyentry->list, &data->keytable);
+ } else {
+ kfree(new_keyentry);
+ clear_bit(old_keycode, dev->keybit);
+ list_for_each_entry(keyentry, &data->keytable, list) {
+ if (keyentry->key.keycode == old_keycode) {
+ set_bit(old_keycode, dev->keybit);
+ break;
+ }
+ }
+ }
+
+ write_unlock_irqrestore(&keytable_lock, flags);
+ return 0;
+}
+
+/*
+ * Timer function to report keyup event some time after keydown is
+ * reported by the ISR.
+ */
+static void
+wbcir_keyup(unsigned long cookie)
+{
+ struct wbcir_data *data = (struct wbcir_data *)cookie;
+ unsigned long flags;
+
+ /*
+ * data->keyup_jiffies is used to prevent a race condition if a
+ * hardware interrupt occurs at this point and the keyup timer
+ * event is moved further into the future as a result.
+ *
+ * The timer will then be reactivated and this function called
+ * again in the future. We need to exit gracefully in that case
+ * to allow the input subsystem to do its auto-repeat magic or
+ * a keyup event might follow immediately after the keydown.
+ */
+
+ spin_lock_irqsave(&wbcir_lock, flags);
+
+ if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
+ data->keypressed = 0;
+ led_trigger_event(data->rxtrigger, LED_OFF);
+ input_report_key(data->input_dev, data->last_keycode, 0);
+ input_sync(data->input_dev);
+ }
+
+ spin_unlock_irqrestore(&wbcir_lock, flags);
+}
+
+static void
+wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
+{
+ unsigned int keycode;
+
+ /* Repeat? */
+ if (data->last_scancode == scancode &&
+ data->last_toggle == toggle &&
+ data->keypressed)
+ goto set_timer;
+ data->last_scancode = scancode;
+
+ /* Do we need to release an old keypress? */
+ if (data->keypressed) {
+ input_report_key(data->input_dev, data->last_keycode, 0);
+ input_sync(data->input_dev);
+ data->keypressed = 0;
+ }
+
+ /* Report scancode */
+ input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode);
+
+ /* Do we know this scancode? */
+ keycode = wbcir_do_getkeycode(data, scancode);
+ if (keycode == KEY_RESERVED)
+ goto set_timer;
+
+ /* Register a keypress */
+ input_report_key(data->input_dev, keycode, 1);
+ data->keypressed = 1;
+ data->last_keycode = keycode;
+ data->last_toggle = toggle;
+
+set_timer:
+ input_sync(data->input_dev);
+ led_trigger_event(data->rxtrigger,
+ data->keypressed ? LED_FULL : LED_OFF);
+ data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&data->timer_keyup, data->keyup_jiffies);
+}
+
+
+
+/*****************************************************************************
+ *
+ * IR PARSING FUNCTIONS
+ *
+ *****************************************************************************/
+
+/* Resets all irdata */
+static void
+wbcir_reset_irdata(struct wbcir_data *data)
+{
+ memset(data->irdata, 0, sizeof(data->irdata));
+ data->irdata_count = 0;
+ data->irdata_off = 0;
+ data->irdata_error = 0;
+}
+
+/* Adds one bit of irdata */
+static void
+add_irdata_bit(struct wbcir_data *data, int set)
+{
+ if (data->irdata_count >= sizeof(data->irdata) * 8) {
+ data->irdata_error = 1;
+ return;
+ }
+
+ if (set)
+ __set_bit(data->irdata_count, data->irdata);
+ data->irdata_count++;
+}
+
+/* Gets count bits of irdata */
+static u16
+get_bits(struct wbcir_data *data, int count)
+{
+ u16 val = 0x0;
+
+ if (data->irdata_count - data->irdata_off < count) {
+ data->irdata_error = 1;
+ return 0x0;
+ }
+
+ while (count > 0) {
+ val <<= 1;
+ if (test_bit(data->irdata_off, data->irdata))
+ val |= 0x1;
+ count--;
+ data->irdata_off++;
+ }
+
+ return val;
+}
+
+/* Reads 16 cells and converts them to a byte */
+static u8
+wbcir_rc6cells_to_byte(struct wbcir_data *data)
+{
+ u16 raw = get_bits(data, 16);
+ u8 val = 0x00;
+ int bit;
+
+ for (bit = 0; bit < 8; bit++) {
+ switch (raw & 0x03) {
+ case 0x01:
+ break;
+ case 0x02:
+ val |= (0x01 << bit);
+ break;
+ default:
+ data->irdata_error = 1;
+ break;
+ }
+ raw >>= 2;
+ }
+
+ return val;
+}
+
+/* Decodes a number of bits from raw RC5 data */
+static u8
+wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count)
+{
+ u16 raw = get_bits(data, count * 2);
+ u8 val = 0x00;
+ int bit;
+
+ for (bit = 0; bit < count; bit++) {
+ switch (raw & 0x03) {
+ case 0x01:
+ val |= (0x01 << bit);
+ break;
+ case 0x02:
+ break;
+ default:
+ data->irdata_error = 1;
+ break;
+ }
+ raw >>= 2;
+ }
+
+ return val;
+}
+
+static void
+wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
+{
+ /*
+ * Normal bits are manchester coded as follows:
+ * cell0 + cell1 = logic "0"
+ * cell1 + cell0 = logic "1"
+ *
+ * The IR pulse has the following components:
+ *
+ * Leader - 6 * cell1 - discarded
+ * Gap - 2 * cell0 - discarded
+ * Start bit - Normal Coding - always "1"
+ * Mode Bit 2 - 0 - Normal Coding
+ * Toggle bit - Normal Coding with double bit time,
+ * e.g. cell0 + cell0 + cell1 + cell1
+ * means logic "0".
+ *
+ * The rest depends on the mode, the following modes are known:
+ *
+ * MODE 0:
+ * Address Bit 7 - 0 - Normal Coding
+ * Command Bit 7 - 0 - Normal Coding
+ *
+ * MODE 6:
+ * The above Toggle Bit is used as a submode bit, 0 = A, 1 = B.
+ * Submode B is for pointing devices, only remotes using submode A
+ * are supported.
+ *
+ * Customer range bit - 0 => Customer = 7 bits, 0...127
+ * 1 => Customer = 15 bits, 32768...65535
+ * Customer Bits - Normal Coding
+ *
+ * Customer codes are allocated by Philips. The rest of the bits
+ * are customer dependent. The following is commonly used (and the
+ * only supported config):
+ *
+ * Toggle Bit - Normal Coding
+ * Address Bit 6 - 0 - Normal Coding
+ * Command Bit 7 - 0 - Normal Coding
+ *
+ * All modes are followed by at least 6 * cell0.
+ *
+ * MODE 0 msglen:
+ * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) +
+ * 8 * 2 (address) + 8 * 2 (command) =
+ * 44 cells
+ *
+ * MODE 6A msglen:
+ * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) +
+ * 1 * 2 (customer range bit) + 7/15 * 2 (customer bits) +
+ * 1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) =
+ * 60 - 76 cells
+ */
+ u8 mode;
+ u8 toggle;
+ u16 customer = 0x0;
+ u8 address;
+ u8 command;
+ u32 scancode;
+
+ /* Leader mark */
+ while (get_bits(data, 1) && !data->irdata_error)
+ /* Do nothing */;
+
+ /* Leader space */
+ if (get_bits(data, 1)) {
+ dev_dbg(dev, "RC6 - Invalid leader space\n");
+ return;
+ }
+
+ /* Start bit */
+ if (get_bits(data, 2) != 0x02) {
+ dev_dbg(dev, "RC6 - Invalid start bit\n");
+ return;
+ }
+
+ /* Mode */
+ mode = get_bits(data, 6);
+ switch (mode) {
+ case 0x15: /* 010101 = b000 */
+ mode = 0;
+ break;
+ case 0x29: /* 101001 = b110 */
+ mode = 6;
+ break;
+ default:
+ dev_dbg(dev, "RC6 - Invalid mode\n");
+ return;
+ }
+
+ /* Toggle bit / Submode bit */
+ toggle = get_bits(data, 4);
+ switch (toggle) {
+ case 0x03:
+ toggle = 0;
+ break;
+ case 0x0C:
+ toggle = 1;
+ break;
+ default:
+ dev_dbg(dev, "RC6 - Toggle bit error\n");
+ break;
+ }
+
+ /* Customer */
+ if (mode == 6) {
+ if (toggle != 0) {
+ dev_dbg(dev, "RC6B - Not Supported\n");
+ return;
+ }
+
+ customer = wbcir_rc6cells_to_byte(data);
+
+ if (customer & 0x80) {
+ /* 15 bit customer value */
+ customer <<= 8;
+ customer |= wbcir_rc6cells_to_byte(data);
+ }
+ }
+
+ /* Address */
+ address = wbcir_rc6cells_to_byte(data);
+ if (mode == 6) {
+ toggle = address >> 7;
+ address &= 0x7F;
+ }
+
+ /* Command */
+ command = wbcir_rc6cells_to_byte(data);
+
+ /* Create scancode */
+ scancode = command;
+ scancode |= address << 8;
+ scancode |= customer << 16;
+
+ /* Last sanity check */
+ if (data->irdata_error) {
+ dev_dbg(dev, "RC6 - Cell error(s)\n");
+ return;
+ }
+
+ dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
+ "toggle %u mode %u scan 0x%08X\n",
+ address,
+ command,
+ customer,
+ (unsigned int)toggle,
+ (unsigned int)mode,
+ scancode);
+
+ wbcir_keydown(data, scancode, toggle);
+}
+
+static void
+wbcir_parse_rc5(struct device *dev, struct wbcir_data *data)
+{
+ /*
+ * Bits are manchester coded as follows:
+ * cell1 + cell0 = logic "0"
+ * cell0 + cell1 = logic "1"
+ * (i.e. the reverse of RC6)
+ *
+ * Start bit 1 - "1" - discarded
+ * Start bit 2 - Must be inverted to get command bit 6
+ * Toggle bit
+ * Address Bit 4 - 0
+ * Command Bit 5 - 0
+ */
+ u8 toggle;
+ u8 address;
+ u8 command;
+ u32 scancode;
+
+ /* Start bit 1 */
+ if (!get_bits(data, 1)) {
+ dev_dbg(dev, "RC5 - Invalid start bit\n");
+ return;
+ }
+
+ /* Start bit 2 */
+ if (!wbcir_get_rc5bits(data, 1))
+ command = 0x40;
+ else
+ command = 0x00;
+
+ toggle = wbcir_get_rc5bits(data, 1);
+ address = wbcir_get_rc5bits(data, 5);
+ command |= wbcir_get_rc5bits(data, 6);
+ scancode = address << 7 | command;
+
+ /* Last sanity check */
+ if (data->irdata_error) {
+ dev_dbg(dev, "RC5 - Invalid message\n");
+ return;
+ }
+
+ dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n",
+ (unsigned int)address,
+ (unsigned int)command,
+ (unsigned int)toggle,
+ (unsigned int)scancode);
+
+ wbcir_keydown(data, scancode, toggle);
+}
+
+static void
+wbcir_parse_nec(struct device *dev, struct wbcir_data *data)
+{
+ /*
+ * Each bit represents 560 us.
+ *
+ * Leader - 9 ms burst
+ * Gap - 4.5 ms silence
+ * Address1 bit 0 - 7 - Address 1
+ * Address2 bit 0 - 7 - Address 2
+ * Command1 bit 0 - 7 - Command 1
+ * Command2 bit 0 - 7 - Command 2
+ *
+ * Note the bit order!
+ *
+ * With the old NEC protocol, Address2 was the inverse of Address1
+ * and Command2 was the inverse of Command1 and were used as
+ * an error check.
+ *
+ * With NEC extended, Address1 is the LSB of the Address and
+ * Address2 is the MSB, Command parsing remains unchanged.
+ *
+ * A repeat message is coded as:
+ * Leader - 9 ms burst
+ * Gap - 2.25 ms silence
+ * Repeat - 560 us active
+ */
+ u8 address1;
+ u8 address2;
+ u8 command1;
+ u8 command2;
+ u16 address;
+ u32 scancode;
+
+ /* Leader mark */
+ while (get_bits(data, 1) && !data->irdata_error)
+ /* Do nothing */;
+
+ /* Leader space */
+ if (get_bits(data, 4)) {
+ dev_dbg(dev, "NEC - Invalid leader space\n");
+ return;
+ }
+
+ /* Repeat? */
+ if (get_bits(data, 1)) {
+ if (!data->keypressed) {
+ dev_dbg(dev, "NEC - Stray repeat message\n");
+ return;
+ }
+
+ dev_dbg(dev, "IR-NEC repeat s %u\n",
+ (unsigned int)data->last_scancode);
+
+ wbcir_keydown(data, data->last_scancode, data->last_toggle);
+ return;
+ }
+
+ /* Remaining leader space */
+ if (get_bits(data, 3)) {
+ dev_dbg(dev, "NEC - Invalid leader space\n");
+ return;
+ }
+
+ address1 = bitrev8(get_bits(data, 8));
+ address2 = bitrev8(get_bits(data, 8));
+ command1 = bitrev8(get_bits(data, 8));
+ command2 = bitrev8(get_bits(data, 8));
+
+ /* Sanity check */
+ if (data->irdata_error) {
+ dev_dbg(dev, "NEC - Invalid message\n");
+ return;
+ }
+
+ /* Check command validity */
+ if (command1 != ~command2) {
+ dev_dbg(dev, "NEC - Command bytes mismatch\n");
+ return;
+ }
+
+ /* Check for extended NEC protocol */
+ address = address1;
+ if (address1 != ~address2)
+ address |= address2 << 8;
+
+ scancode = address << 8 | command1;
+
+ dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n",
+ (unsigned int)address,
+ (unsigned int)command1,
+ (unsigned int)scancode);
+
+ wbcir_keydown(data, scancode, !data->last_toggle);
+}
+
+
+
+/*****************************************************************************
+ *
+ * INTERRUPT FUNCTIONS
+ *
+ *****************************************************************************/
+
+static irqreturn_t
+wbcir_irq_handler(int irqno, void *cookie)
+{
+ struct pnp_dev *device = cookie;
+ struct wbcir_data *data = pnp_get_drvdata(device);
+ struct device *dev = &device->dev;
+ u8 status;
+ unsigned long flags;
+ u8 irdata[8];
+ int i;
+ unsigned int hw;
+
+ spin_lock_irqsave(&wbcir_lock, flags);
+
+ wbcir_select_bank(data, WBCIR_BANK_0);
+
+ status = inb(data->sbase + WBCIR_REG_SP3_EIR);
+
+ if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
+ spin_unlock_irqrestore(&wbcir_lock, flags);
+ return IRQ_NONE;
+ }
+
+ if (status & WBCIR_IRQ_ERR)
+ data->irdata_error = 1;
+
+ if (!(status & WBCIR_IRQ_RX))
+ goto out;
+
+ /* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
+ insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
+
+ for (i = 0; i < sizeof(irdata); i++) {
+ hw = hweight8(irdata[i]);
+ if (hw > 4)
+ add_irdata_bit(data, 0);
+ else
+ add_irdata_bit(data, 1);
+
+ if (hw == 8)
+ data->idle_count++;
+ else
+ data->idle_count = 0;
+ }
+
+ if (data->idle_count > WBCIR_MAX_IDLE_BYTES) {
+ /* Set RXINACTIVE... */
+ outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
+
+ /* ...and drain the FIFO */
+ while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
+ inb(data->sbase + WBCIR_REG_SP3_RXDATA);
+
+ dev_dbg(dev, "IRDATA:\n");
+ for (i = 0; i < data->irdata_count; i += BITS_PER_LONG)
+ dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]);
+
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ wbcir_parse_rc5(dev, data);
+ break;
+ case IR_PROTOCOL_RC6:
+ wbcir_parse_rc6(dev, data);
+ break;
+ case IR_PROTOCOL_NEC:
+ wbcir_parse_nec(dev, data);
+ break;
+ }
+
+ wbcir_reset_irdata(data);
+ data->idle_count = 0;
+ }
+
+out:
+ spin_unlock_irqrestore(&wbcir_lock, flags);
+ return IRQ_HANDLED;
+}
+
+
+
+/*****************************************************************************
+ *
+ * SUSPEND/RESUME FUNCTIONS
+ *
+ *****************************************************************************/
+
+static void
+wbcir_shutdown(struct pnp_dev *device)
+{
+ struct device *dev = &device->dev;
+ struct wbcir_data *data = pnp_get_drvdata(device);
+ int do_wake = 1;
+ u8 match[11];
+ u8 mask[11];
+ u8 rc6_csl = 0;
+ int i;
+
+ memset(match, 0, sizeof(match));
+ memset(mask, 0, sizeof(mask));
+
+ if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) {
+ do_wake = 0;
+ goto finish;
+ }
+
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ if (wake_sc > 0xFFF) {
+ do_wake = 0;
+ dev_err(dev, "RC5 - Invalid wake scancode\n");
+ break;
+ }
+
+ /* Mask = 13 bits, ex toggle */
+ mask[0] = 0xFF;
+ mask[1] = 0x17;
+
+ match[0] = (wake_sc & 0x003F); /* 6 command bits */
+ match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */
+ match[1] = (wake_sc & 0x0E00) >> 9; /* 3 address bits */
+ if (!(wake_sc & 0x0040)) /* 2nd start bit */
+ match[1] |= 0x10;
+
+ break;
+
+ case IR_PROTOCOL_NEC:
+ if (wake_sc > 0xFFFFFF) {
+ do_wake = 0;
+ dev_err(dev, "NEC - Invalid wake scancode\n");
+ break;
+ }
+
+ mask[0] = mask[1] = mask[2] = mask[3] = 0xFF;
+
+ match[1] = bitrev8((wake_sc & 0xFF));
+ match[0] = ~match[1];
+
+ match[3] = bitrev8((wake_sc & 0xFF00) >> 8);
+ if (wake_sc > 0xFFFF)
+ match[2] = bitrev8((wake_sc & 0xFF0000) >> 16);
+ else
+ match[2] = ~match[3];
+
+ break;
+
+ case IR_PROTOCOL_RC6:
+
+ if (wake_rc6mode == 0) {
+ if (wake_sc > 0xFFFF) {
+ do_wake = 0;
+ dev_err(dev, "RC6 - Invalid wake scancode\n");
+ break;
+ }
+
+ /* Command */
+ match[0] = wbcir_to_rc6cells(wake_sc >> 0);
+ mask[0] = 0xFF;
+ match[1] = wbcir_to_rc6cells(wake_sc >> 4);
+ mask[1] = 0xFF;
+
+ /* Address */
+ match[2] = wbcir_to_rc6cells(wake_sc >> 8);
+ mask[2] = 0xFF;
+ match[3] = wbcir_to_rc6cells(wake_sc >> 12);
+ mask[3] = 0xFF;
+
+ /* Header */
+ match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */
+ mask[4] = 0xF0;
+ match[5] = 0x09; /* start bit = 1, mode2 = 0 */
+ mask[5] = 0x0F;
+
+ rc6_csl = 44;
+
+ } else if (wake_rc6mode == 6) {
+ i = 0;
+
+ /* Command */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 0);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 4);
+ mask[i++] = 0xFF;
+
+ /* Address + Toggle */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 8);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 12);
+ mask[i++] = 0x3F;
+
+ /* Customer bits 7 - 0 */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 16);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 20);
+ mask[i++] = 0xFF;
+
+ if (wake_sc & 0x80000000) {
+ /* Customer range bit and bits 15 - 8 */
+ match[i] = wbcir_to_rc6cells(wake_sc >> 24);
+ mask[i++] = 0xFF;
+ match[i] = wbcir_to_rc6cells(wake_sc >> 28);
+ mask[i++] = 0xFF;
+ rc6_csl = 76;
+ } else if (wake_sc <= 0x007FFFFF) {
+ rc6_csl = 60;
+ } else {
+ do_wake = 0;
+ dev_err(dev, "RC6 - Invalid wake scancode\n");
+ break;
+ }
+
+ /* Header */
+ match[i] = 0x93; /* mode1 = mode0 = 1, submode = 0 */
+ mask[i++] = 0xFF;
+ match[i] = 0x0A; /* start bit = 1, mode2 = 1 */
+ mask[i++] = 0x0F;
+
+ } else {
+ do_wake = 0;
+ dev_err(dev, "RC6 - Invalid wake mode\n");
+ }
+
+ break;
+
+ default:
+ do_wake = 0;
+ break;
+ }
+
+finish:
+ if (do_wake) {
+ /* Set compare and compare mask */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
+ WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0,
+ 0x3F);
+ outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11);
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
+ WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0,
+ 0x3F);
+ outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11);
+
+ /* RC6 Compare String Len */
+ outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL);
+
+ /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+ /* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07);
+
+ /* Set CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01);
+
+ } else {
+ /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ /* Clear CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+ }
+
+ /* Disable interrupts */
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+}
+
+static int
+wbcir_suspend(struct pnp_dev *device, pm_message_t state)
+{
+ wbcir_shutdown(device);
+ return 0;
+}
+
+static int
+wbcir_resume(struct pnp_dev *device)
+{
+ struct wbcir_data *data = pnp_get_drvdata(device);
+
+ /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ /* Clear CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+
+ /* Enable interrupts */
+ wbcir_reset_irdata(data);
+ outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+
+ return 0;
+}
+
+
+
+/*****************************************************************************
+ *
+ * SETUP/INIT FUNCTIONS
+ *
+ *****************************************************************************/
+
+static void
+wbcir_cfg_ceir(struct wbcir_data *data)
+{
+ u8 tmp;
+
+ /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
+ tmp = protocol << 4;
+ if (invert)
+ tmp |= 0x08;
+ outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL);
+
+ /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+ /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ /* Set RC5 cell time to correspond to 36 kHz */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F);
+
+ /* Set IRTX_INV */
+ if (invert)
+ outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL);
+ else
+ outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
+
+ /*
+ * Clear IR LED, set SP3 clock to 24Mhz
+ * set SP3_IRRX_SW to binary 01, helpfully not documented
+ */
+ outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
+}
+
+static int __devinit
+wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
+{
+ struct device *dev = &device->dev;
+ struct wbcir_data *data;
+ int err;
+
+ if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN &&
+ pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN &&
+ pnp_port_len(device, 2) == SP_IOMEM_LEN)) {
+ dev_err(dev, "Invalid resources\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ pnp_set_drvdata(device, data);
+
+ data->ebase = pnp_port_start(device, 0);
+ data->wbase = pnp_port_start(device, 1);
+ data->sbase = pnp_port_start(device, 2);
+ data->irq = pnp_irq(device, 0);
+
+ if (data->wbase == 0 || data->ebase == 0 ||
+ data->sbase == 0 || data->irq == 0) {
+ err = -ENODEV;
+ dev_err(dev, "Invalid resources\n");
+ goto exit_free_data;
+ }
+
+ dev_dbg(&device->dev, "Found device "
+ "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
+ data->wbase, data->ebase, data->sbase, data->irq);
+
+ if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
+ dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+ data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1);
+ err = -EBUSY;
+ goto exit_free_data;
+ }
+
+ if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) {
+ dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+ data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1);
+ err = -EBUSY;
+ goto exit_release_wbase;
+ }
+
+ if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) {
+ dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+ data->sbase, data->sbase + SP_IOMEM_LEN - 1);
+ err = -EBUSY;
+ goto exit_release_ebase;
+ }
+
+ err = request_irq(data->irq, wbcir_irq_handler,
+ IRQF_DISABLED, DRVNAME, device);
+ if (err) {
+ dev_err(dev, "Failed to claim IRQ %u\n", data->irq);
+ err = -EBUSY;
+ goto exit_release_sbase;
+ }
+
+ led_trigger_register_simple("cir-tx", &data->txtrigger);
+ if (!data->txtrigger) {
+ err = -ENOMEM;
+ goto exit_free_irq;
+ }
+
+ led_trigger_register_simple("cir-rx", &data->rxtrigger);
+ if (!data->rxtrigger) {
+ err = -ENOMEM;
+ goto exit_unregister_txtrigger;
+ }
+
+ data->led.name = "cir::activity";
+ data->led.default_trigger = "cir-rx";
+ data->led.brightness_set = wbcir_led_brightness_set;
+ data->led.brightness_get = wbcir_led_brightness_get;
+ err = led_classdev_register(&device->dev, &data->led);
+ if (err)
+ goto exit_unregister_rxtrigger;
+
+ data->input_dev = input_allocate_device();
+ if (!data->input_dev) {
+ err = -ENOMEM;
+ goto exit_unregister_led;
+ }
+
+ data->input_dev->evbit[0] = BIT(EV_KEY);
+ data->input_dev->name = WBCIR_NAME;
+ data->input_dev->phys = "wbcir/cir0";
+ data->input_dev->id.bustype = BUS_HOST;
+ data->input_dev->id.vendor = PCI_VENDOR_ID_WINBOND;
+ data->input_dev->id.product = WBCIR_ID_FAMILY;
+ data->input_dev->id.version = WBCIR_ID_CHIP;
+ data->input_dev->getkeycode = wbcir_getkeycode;
+ data->input_dev->setkeycode = wbcir_setkeycode;
+ input_set_capability(data->input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(data->input_dev, data);
+
+ err = input_register_device(data->input_dev);
+ if (err)
+ goto exit_free_input;
+
+ data->last_scancode = INVALID_SCANCODE;
+ INIT_LIST_HEAD(&data->keytable);
+ setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data);
+
+ /* Load default keymaps */
+ if (protocol == IR_PROTOCOL_RC6) {
+ int i;
+ for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) {
+ err = wbcir_setkeycode(data->input_dev,
+ (int)rc6_def_keymap[i].scancode,
+ (int)rc6_def_keymap[i].keycode);
+ if (err)
+ goto exit_unregister_keys;
+ }
+ }
+
+ device_init_wakeup(&device->dev, 1);
+
+ wbcir_cfg_ceir(data);
+
+ /* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+ /* Enable extended mode */
+ wbcir_select_bank(data, WBCIR_BANK_2);
+ outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
+
+ /*
+ * Configure baud generator, IR data will be sampled at
+ * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
+ *
+ * The ECIR registers include a flag to change the
+ * 24Mhz clock freq to 48Mhz.
+ *
+ * It's not documented in the specs, but fifo levels
+ * other than 16 seems to be unsupported.
+ */
+
+ /* prescaler 1.0, tx/rx fifo lvl 16 */
+ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
+
+ /* Set baud divisor to generate one byte per bit/cell */
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ case IR_PROTOCOL_RC6:
+ outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ case IR_PROTOCOL_NEC:
+ outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ }
+ outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
+
+ /* Set CEIR mode */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
+ inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
+ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
+
+ /* Disable RX demod, run-length encoding/decoding, set freq span */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+
+ /* Disable timer */
+ wbcir_select_bank(data, WBCIR_BANK_4);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
+
+ /* Enable MSR interrupt, Clear AUX_IRX */
+ wbcir_select_bank(data, WBCIR_BANK_5);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
+
+ /* Disable CRC */
+ wbcir_select_bank(data, WBCIR_BANK_6);
+ outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
+
+ /* Set RX/TX (de)modulation freq, not really used */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
+ outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
+
+ /* Set invert and pin direction */
+ if (invert)
+ outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
+ else
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
+
+ /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
+
+ /* Clear AUX status bits */
+ outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
+
+ /* Enable interrupts */
+ outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+
+ return 0;
+
+exit_unregister_keys:
+ if (!list_empty(&data->keytable)) {
+ struct wbcir_keyentry *key;
+ struct wbcir_keyentry *keytmp;
+
+ list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
+ list_del(&key->list);
+ kfree(key);
+ }
+ }
+ input_unregister_device(data->input_dev);
+ /* Can't call input_free_device on an unregistered device */
+ data->input_dev = NULL;
+exit_free_input:
+ input_free_device(data->input_dev);
+exit_unregister_led:
+ led_classdev_unregister(&data->led);
+exit_unregister_rxtrigger:
+ led_trigger_unregister_simple(data->rxtrigger);
+exit_unregister_txtrigger:
+ led_trigger_unregister_simple(data->txtrigger);
+exit_free_irq:
+ free_irq(data->irq, device);
+exit_release_sbase:
+ release_region(data->sbase, SP_IOMEM_LEN);
+exit_release_ebase:
+ release_region(data->ebase, EHFUNC_IOMEM_LEN);
+exit_release_wbase:
+ release_region(data->wbase, WAKEUP_IOMEM_LEN);
+exit_free_data:
+ kfree(data);
+ pnp_set_drvdata(device, NULL);
+exit:
+ return err;
+}
+
+static void __devexit
+wbcir_remove(struct pnp_dev *device)
+{
+ struct wbcir_data *data = pnp_get_drvdata(device);
+ struct wbcir_keyentry *key;
+ struct wbcir_keyentry *keytmp;
+
+ /* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+ del_timer_sync(&data->timer_keyup);
+
+ free_irq(data->irq, device);
+
+ /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+ /* Clear CEIR_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+
+ /* Clear BUFF_EN, END_EN, MATCH_EN */
+ wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+ /* This will generate a keyup event if necessary */
+ input_unregister_device(data->input_dev);
+
+ led_trigger_unregister_simple(data->rxtrigger);
+ led_trigger_unregister_simple(data->txtrigger);
+ led_classdev_unregister(&data->led);
+
+ /* This is ok since &data->led isn't actually used */
+ wbcir_led_brightness_set(&data->led, LED_OFF);
+
+ release_region(data->wbase, WAKEUP_IOMEM_LEN);
+ release_region(data->ebase, EHFUNC_IOMEM_LEN);
+ release_region(data->sbase, SP_IOMEM_LEN);
+
+ list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
+ list_del(&key->list);
+ kfree(key);
+ }
+
+ kfree(data);
+
+ pnp_set_drvdata(device, NULL);
+}
+
+static const struct pnp_device_id wbcir_ids[] = {
+ { "WEC1022", 0 },
+ { "", 0 }
+};
+MODULE_DEVICE_TABLE(pnp, wbcir_ids);
+
+static struct pnp_driver wbcir_driver = {
+ .name = WBCIR_NAME,
+ .id_table = wbcir_ids,
+ .probe = wbcir_probe,
+ .remove = __devexit_p(wbcir_remove),
+ .suspend = wbcir_suspend,
+ .resume = wbcir_resume,
+ .shutdown = wbcir_shutdown
+};
+
+static int __init
+wbcir_init(void)
+{
+ int ret;
+
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ case IR_PROTOCOL_NEC:
+ case IR_PROTOCOL_RC6:
+ break;
+ default:
+ printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
+ return -EINVAL;
+ }
+
+ ret = pnp_register_driver(&wbcir_driver);
+ if (ret)
+ printk(KERN_ERR DRVNAME ": Unable to register driver\n");
+
+ return ret;
+}
+
+static void __exit
+wbcir_exit(void)
+{
+ pnp_unregister_driver(&wbcir_driver);
+}
+
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
+MODULE_LICENSE("GPL");
+
+module_init(wbcir_init);
+module_exit(wbcir_exit);
+
+
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
new file mode 100644
index 00000000000..ba4f5dd7c60
--- /dev/null
+++ b/drivers/input/misc/wm831x-on.c
@@ -0,0 +1,163 @@
+/**
+ * wm831x-on.c - WM831X ON pin driver
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_on {
+ struct input_dev *dev;
+ struct delayed_work work;
+ struct wm831x *wm831x;
+};
+
+/*
+ * The chip gives us an interrupt when the ON pin is asserted but we
+ * then need to poll to see when the pin is deasserted.
+ */
+static void wm831x_poll_on(struct work_struct *work)
+{
+ struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on,
+ work.work);
+ struct wm831x *wm831x = wm831x_on->wm831x;
+ int poll, ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL);
+ if (ret >= 0) {
+ poll = !(ret & WM831X_ON_PIN_STS);
+
+ input_report_key(wm831x_on->dev, KEY_POWER, poll);
+ input_sync(wm831x_on->dev);
+ } else {
+ dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret);
+ poll = 1;
+ }
+
+ if (poll)
+ schedule_delayed_work(&wm831x_on->work, 100);
+}
+
+static irqreturn_t wm831x_on_irq(int irq, void *data)
+{
+ struct wm831x_on *wm831x_on = data;
+
+ schedule_delayed_work(&wm831x_on->work, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit wm831x_on_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_on *wm831x_on;
+ int irq = platform_get_irq(pdev, 0);
+ int ret;
+
+ wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
+ if (!wm831x_on) {
+ dev_err(&pdev->dev, "Can't allocate data\n");
+ return -ENOMEM;
+ }
+
+ wm831x_on->wm831x = wm831x;
+ INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
+
+ wm831x_on->dev = input_allocate_device();
+ if (!wm831x_on->dev) {
+ dev_err(&pdev->dev, "Can't allocate input dev\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY);
+ wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ wm831x_on->dev->name = "wm831x_on";
+ wm831x_on->dev->phys = "wm831x_on/input0";
+ wm831x_on->dev->dev.parent = &pdev->dev;
+
+ ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
+ IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
+ goto err_input_dev;
+ }
+ ret = input_register_device(wm831x_on->dev);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret);
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, wm831x_on);
+
+ return 0;
+
+err_irq:
+ wm831x_free_irq(wm831x, irq, NULL);
+err_input_dev:
+ input_free_device(wm831x_on->dev);
+err:
+ kfree(wm831x_on);
+ return ret;
+}
+
+static int __devexit wm831x_on_remove(struct platform_device *pdev)
+{
+ struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+ cancel_delayed_work_sync(&wm831x_on->work);
+ input_unregister_device(wm831x_on->dev);
+ kfree(wm831x_on);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_on_driver = {
+ .probe = wm831x_on_probe,
+ .remove = __devexit_p(wm831x_on_remove),
+ .driver = {
+ .name = "wm831x-on",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm831x_on_init(void)
+{
+ return platform_driver_register(&wm831x_on_driver);
+}
+module_init(wm831x_on_init);
+
+static void __exit wm831x_on_exit(void)
+{
+ platform_driver_unregister(&wm831x_on_driver);
+}
+module_exit(wm831x_on_exit);
+
+MODULE_ALIAS("platform:wm831x-on");
+MODULE_DESCRIPTION("WM831x ON pin");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 966b8868f79..a13d80f7da1 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -13,6 +13,7 @@
#define MOUSEDEV_MINORS 32
#define MOUSEDEV_MIX 31
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/poll.h>
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 769ba65a585..f3876acc3e8 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -13,6 +13,7 @@
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/input.h>
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index b03009bb746..27fdaaffbb4 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -9,6 +9,7 @@
* the Free Software Foundation.
*/
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/poll.h>
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index b9694b6445d..6d345112bcb 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -15,6 +15,7 @@
#include <asm/uaccess.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6dfb0a2b0a7..8cc453c85ea 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -521,4 +521,13 @@ config TOUCHSCREEN_W90X900
To compile this driver as a module, choose M here: the
module will be called w90p910_ts.
+config TOUCHSCREEN_PCAP
+ tristate "Motorola PCAP touchscreen"
+ depends on EZX_PCAP
+ help
+ Say Y here if you have a Motorola EZX telephone and
+ want to enable support for the built-in touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcap_ts.
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index a882ca16506..15fa62cffc7 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -41,3 +41,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index ecaeb7e8e75..eb83939c705 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -842,3 +842,4 @@ module_exit(ad7877_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("AD7877 touchscreen Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad7877");
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index b965101074e..c21e6d3a884 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -781,3 +781,4 @@ module_exit(ad7879_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad7879");
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index ba9d38c3f41..09c810999b9 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1256,3 +1256,4 @@ module_exit(ads7846_exit);
MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ads7846");
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
new file mode 100644
index 00000000000..67fcd33595d
--- /dev/null
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -0,0 +1,271 @@
+/*
+ * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform.
+ *
+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/pm.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_ts {
+ struct pcap_chip *pcap;
+ struct input_dev *input;
+ struct delayed_work work;
+ u16 x, y;
+ u16 pressure;
+ u8 read_state;
+};
+
+#define SAMPLE_DELAY 20 /* msecs */
+
+#define X_AXIS_MIN 0
+#define X_AXIS_MAX 1023
+#define Y_AXIS_MAX X_AXIS_MAX
+#define Y_AXIS_MIN X_AXIS_MIN
+#define PRESSURE_MAX X_AXIS_MAX
+#define PRESSURE_MIN X_AXIS_MIN
+
+static void pcap_ts_read_xy(void *data, u16 res[2])
+{
+ struct pcap_ts *pcap_ts = data;
+
+ switch (pcap_ts->read_state) {
+ case PCAP_ADC_TS_M_PRESSURE:
+ /* pressure reading is unreliable */
+ if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX)
+ pcap_ts->pressure = res[0];
+ pcap_ts->read_state = PCAP_ADC_TS_M_XY;
+ schedule_delayed_work(&pcap_ts->work, 0);
+ break;
+ case PCAP_ADC_TS_M_XY:
+ pcap_ts->y = res[0];
+ pcap_ts->x = res[1];
+ if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
+ pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
+ /* pen has been released */
+ input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
+ input_report_key(pcap_ts->input, BTN_TOUCH, 0);
+
+ pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+ schedule_delayed_work(&pcap_ts->work, 0);
+ } else {
+ /* pen is touching the screen */
+ input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
+ input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
+ input_report_key(pcap_ts->input, BTN_TOUCH, 1);
+ input_report_abs(pcap_ts->input, ABS_PRESSURE,
+ pcap_ts->pressure);
+
+ /* switch back to pressure read mode */
+ pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+ schedule_delayed_work(&pcap_ts->work,
+ msecs_to_jiffies(SAMPLE_DELAY));
+ }
+ input_sync(pcap_ts->input);
+ break;
+ default:
+ dev_warn(&pcap_ts->input->dev,
+ "pcap_ts: Warning, unhandled read_state %d\n",
+ pcap_ts->read_state);
+ break;
+ }
+}
+
+static void pcap_ts_work(struct work_struct *work)
+{
+ struct delayed_work *dw = container_of(work, struct delayed_work, work);
+ struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
+ u8 ch[2];
+
+ pcap_set_ts_bits(pcap_ts->pcap,
+ pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+ if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY)
+ return;
+
+ /* start adc conversion */
+ ch[0] = PCAP_ADC_CH_TS_X1;
+ ch[1] = PCAP_ADC_CH_TS_Y1;
+ pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch,
+ pcap_ts_read_xy, pcap_ts);
+}
+
+static irqreturn_t pcap_ts_event_touch(int pirq, void *data)
+{
+ struct pcap_ts *pcap_ts = data;
+
+ if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) {
+ pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+ schedule_delayed_work(&pcap_ts->work, 0);
+ }
+ return IRQ_HANDLED;
+}
+
+static int pcap_ts_open(struct input_dev *dev)
+{
+ struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+ pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+ schedule_delayed_work(&pcap_ts->work, 0);
+
+ return 0;
+}
+
+static void pcap_ts_close(struct input_dev *dev)
+{
+ struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+ cancel_delayed_work_sync(&pcap_ts->work);
+
+ pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+ pcap_set_ts_bits(pcap_ts->pcap,
+ pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+}
+
+static int __devinit pcap_ts_probe(struct platform_device *pdev)
+{
+ struct input_dev *input_dev;
+ struct pcap_ts *pcap_ts;
+ int err = -ENOMEM;
+
+ pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
+ if (!pcap_ts)
+ return err;
+
+ pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent);
+ platform_set_drvdata(pdev, pcap_ts);
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ goto fail;
+
+ INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work);
+
+ pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+ pcap_set_ts_bits(pcap_ts->pcap,
+ pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+ pcap_ts->input = input_dev;
+ input_set_drvdata(input_dev, pcap_ts);
+
+ input_dev->name = "pcap-touchscreen";
+ input_dev->phys = "pcap_ts/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0002;
+ input_dev->id.version = 0x0100;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->open = pcap_ts_open;
+ input_dev->close = pcap_ts_close;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
+ PRESSURE_MAX, 0, 0);
+
+ err = input_register_device(pcap_ts->input);
+ if (err)
+ goto fail_allocate;
+
+ err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS),
+ pcap_ts_event_touch, 0, "Touch Screen", pcap_ts);
+ if (err)
+ goto fail_register;
+
+ return 0;
+
+fail_register:
+ input_unregister_device(input_dev);
+ goto fail;
+fail_allocate:
+ input_free_device(input_dev);
+fail:
+ kfree(pcap_ts);
+
+ return err;
+}
+
+static int __devexit pcap_ts_remove(struct platform_device *pdev)
+{
+ struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
+
+ free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts);
+ cancel_delayed_work_sync(&pcap_ts->work);
+
+ input_unregister_device(pcap_ts->input);
+
+ kfree(pcap_ts);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcap_ts_suspend(struct device *dev)
+{
+ struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+ pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR);
+ return 0;
+}
+
+static int pcap_ts_resume(struct device *dev)
+{
+ struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+ pcap_set_ts_bits(pcap_ts->pcap,
+ pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+ return 0;
+}
+
+static struct dev_pm_ops pcap_ts_pm_ops = {
+ .suspend = pcap_ts_suspend,
+ .resume = pcap_ts_resume,
+};
+#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops)
+#else
+#define PCAP_TS_PM_OPS NULL
+#endif
+
+static struct platform_driver pcap_ts_driver = {
+ .probe = pcap_ts_probe,
+ .remove = __devexit_p(pcap_ts_remove),
+ .driver = {
+ .name = "pcap-ts",
+ .owner = THIS_MODULE,
+ .pm = PCAP_TS_PM_OPS,
+ },
+};
+
+static int __init pcap_ts_init(void)
+{
+ return platform_driver_register(&pcap_ts_driver);
+}
+
+static void __exit pcap_ts_exit(void)
+{
+ platform_driver_unregister(&pcap_ts_driver);
+}
+
+module_init(pcap_ts_init);
+module_exit(pcap_ts_exit);
+
+MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_ts");
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 252eb11fe9d..f944918466e 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -561,6 +561,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
static int wm97xx_probe(struct device *dev)
{
struct wm97xx *wm;
+ struct wm97xx_pdata *pdata = dev->platform_data;
int ret = 0, id = 0;
wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
@@ -658,6 +659,7 @@ static int wm97xx_probe(struct device *dev)
}
platform_set_drvdata(wm->battery_dev, wm);
wm->battery_dev->dev.parent = dev;
+ wm->battery_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->battery_dev);
if (ret < 0)
goto batt_reg_err;
@@ -671,6 +673,7 @@ static int wm97xx_probe(struct device *dev)
}
platform_set_drvdata(wm->touch_dev, wm);
wm->touch_dev->dev.parent = dev;
+ wm->touch_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->touch_dev);
if (ret < 0)
goto touch_reg_err;