diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/evdev.c | 1 | ||||
-rw-r--r-- | drivers/input/ff-memless.c | 5 | ||||
-rw-r--r-- | drivers/input/joydev.c | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/atkbd.c | 27 | ||||
-rw-r--r-- | drivers/input/misc/cm109.c | 37 | ||||
-rw-r--r-- | drivers/input/misc/hp_sdc_rtc.c | 13 | ||||
-rw-r--r-- | drivers/input/misc/sgi_btns.c | 1 | ||||
-rw-r--r-- | drivers/input/mouse/Kconfig | 25 | ||||
-rw-r--r-- | drivers/input/mouse/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/mouse/elantech.c | 674 | ||||
-rw-r--r-- | drivers/input/mouse/elantech.h | 124 | ||||
-rw-r--r-- | drivers/input/mouse/hgpk.c | 2 | ||||
-rw-r--r-- | drivers/input/mouse/psmouse-base.c | 23 | ||||
-rw-r--r-- | drivers/input/mouse/psmouse.h | 1 | ||||
-rw-r--r-- | drivers/input/mousedev.c | 1 | ||||
-rw-r--r-- | drivers/input/serio/i8042-x86ia64io.h | 22 | ||||
-rw-r--r-- | drivers/input/serio/serio_raw.c | 1 | ||||
-rw-r--r-- | drivers/input/tablet/wacom.h | 13 | ||||
-rw-r--r-- | drivers/input/tablet/wacom_sys.c | 228 | ||||
-rw-r--r-- | drivers/input/tablet/wacom_wac.c | 160 | ||||
-rw-r--r-- | drivers/input/tablet/wacom_wac.h | 4 | ||||
-rw-r--r-- | drivers/input/touchscreen/elo.c | 2 | ||||
-rw-r--r-- | drivers/input/xen-kbdfront.c | 6 |
23 files changed, 1295 insertions, 77 deletions
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 3524bef62be..1070db330d3 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -235,7 +235,6 @@ static int evdev_release(struct inode *inode, struct file *file) evdev_ungrab(evdev, client); mutex_unlock(&evdev->mutex); - evdev_fasync(-1, file, 0); evdev_detach_client(evdev, client); kfree(client); diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 6790e975a98..bc4e40f3ede 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; + unsigned long flags; - spin_lock_bh(&ml->timer_lock); + spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irqrestore(&ml->timer_lock, flags); return 0; } diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 65d7077a75a..a85b1485e77 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -244,7 +244,6 @@ static int joydev_release(struct inode *inode, struct file *file) struct joydev_client *client = file->private_data; struct joydev *joydev = client->joydev; - joydev_fasync(-1, file, 0); joydev_detach_client(joydev, client); kfree(client); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 22016ca1535..379b7ff354e 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio) atkbd_disable(atkbd); /* make sure we don't have a command in flight */ - flush_scheduled_work(); + cancel_delayed_work_sync(&atkbd->event_work); sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); input_unregister_device(atkbd->dev); @@ -868,6 +868,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd) } /* + * Inventec system with broken key release on volume keys + */ +static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd) +{ + const unsigned int forced_release_keys[] = { + 0xae, 0xb0, + }; + int i; + + if (atkbd->set == 2) + for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) + __set_bit(forced_release_keys[i], + atkbd->force_release_mask); +} + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_fixup, .driver_data = atkbd_hp_keymap_fixup, }, + { + .ident = "Inventec Symphony", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), + }, + .callback = atkbd_setup_fixup, + .driver_data = atkbd_inventec_keymap_fixup, + }, { } }; diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index bce160f4349..86457feccfc 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -42,7 +42,7 @@ static char *phone = "kip1000"; module_param(phone, charp, S_IRUSR); -MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}"); +MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); enum { /* HID Registers */ @@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode) } } +/* + * Keymap for ATCom AU-100 + * http://www.atcom.cn/En_products_AU100.html + * http://www.packetizer.com/products/au100/ + * http://www.voip-info.org/wiki/view/AU-100 + * + * Contributed by daniel@gimpelevich.san-francisco.ca.us + */ +static unsigned short keymap_atcom(int scancode) +{ + switch (scancode) { /* phone key: */ + case 0x82: return KEY_NUMERIC_0; /* 0 */ + case 0x11: return KEY_NUMERIC_1; /* 1 */ + case 0x12: return KEY_NUMERIC_2; /* 2 */ + case 0x14: return KEY_NUMERIC_3; /* 3 */ + case 0x21: return KEY_NUMERIC_4; /* 4 */ + case 0x22: return KEY_NUMERIC_5; /* 5 */ + case 0x24: return KEY_NUMERIC_6; /* 6 */ + case 0x41: return KEY_NUMERIC_7; /* 7 */ + case 0x42: return KEY_NUMERIC_8; /* 8 */ + case 0x44: return KEY_NUMERIC_9; /* 9 */ + case 0x84: return KEY_NUMERIC_POUND; /* # */ + case 0x81: return KEY_NUMERIC_STAR; /* * */ + case 0x18: return KEY_ENTER; /* pickup */ + case 0x28: return KEY_ESC; /* hangup */ + case 0x48: return KEY_LEFT; /* left arrow */ + case 0x88: return KEY_RIGHT; /* right arrow */ + default: return special_keymap(scancode); + } +} + static unsigned short (*keymap)(int) = keymap_kip1000; /* @@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void) keymap = keymap_usbph01; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); + } else if (!strcasecmp(phone, "atcom")) { + keymap = keymap_atcom; + printk(KERN_INFO KBUILD_MODNAME ": " + "Keymap for ATCom AU-100 phone loaded\n"); } else { printk(KERN_ERR KBUILD_MODNAME ": " "Unsupported phone: %s\n", phone); diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c index 82ec6b1b646..216a559f55e 100644 --- a/drivers/input/misc/hp_sdc_rtc.c +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -71,7 +71,6 @@ static int hp_sdc_rtc_ioctl(struct inode *inode, struct file *file, static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait); static int hp_sdc_rtc_open(struct inode *inode, struct file *file); -static int hp_sdc_rtc_release(struct inode *inode, struct file *file); static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on); static int hp_sdc_rtc_read_proc(char *page, char **start, off_t off, @@ -414,17 +413,6 @@ static int hp_sdc_rtc_open(struct inode *inode, struct file *file) return 0; } -static int hp_sdc_rtc_release(struct inode *inode, struct file *file) -{ - /* Turn off interrupts? */ - - if (file->f_flags & FASYNC) { - hp_sdc_rtc_fasync (-1, file, 0); - } - - return 0; -} - static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on) { return fasync_helper (fd, filp, on, &hp_sdc_rtc_async_queue); @@ -680,7 +668,6 @@ static const struct file_operations hp_sdc_rtc_fops = { .poll = hp_sdc_rtc_poll, .ioctl = hp_sdc_rtc_ioctl, .open = hp_sdc_rtc_open, - .release = hp_sdc_rtc_release, .fasync = hp_sdc_rtc_fasync, }; diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c index ce238f59b3c..be3a15f5b25 100644 --- a/drivers/input/misc/sgi_btns.c +++ b/drivers/input/misc/sgi_btns.c @@ -174,5 +174,6 @@ static void __exit sgi_buttons_exit(void) platform_driver_unregister(&sgi_buttons_driver); } +MODULE_LICENSE("GPL"); module_init(sgi_buttons_init); module_exit(sgi_buttons_exit); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index f488b6852ba..4e993425977 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -25,8 +25,8 @@ config MOUSE_PS2 mice with wheels and extra buttons, Microsoft, Logitech or Genius compatible. - Synaptics TouchPad users might be interested in a specialized - XFree86 driver at: + Synaptics, ALPS or Elantech TouchPad users might be interested + in a specialized Xorg/XFree86 driver at: <http://w1.894.telia.com/~u89404340/touchpad/index.html> and a new version of GPM at: <http://www.geocities.com/dt_or/gpm/gpm.html> @@ -87,6 +87,27 @@ config MOUSE_PS2_TRACKPOINT If unsure, say Y. +config MOUSE_PS2_ELANTECH + bool "Elantech PS/2 protocol extension" + depends on MOUSE_PS2 + help + Say Y here if you have an Elantech PS/2 touchpad connected + to your system. + + Note that if you enable this driver you will need an updated + X.org Synaptics driver that does not require ABS_PRESSURE + reports from the touchpad (i.e. post 1.5.0 version). You can + grab a patch for the driver here: + + http://userweb.kernel.org/~dtor/synaptics-no-abspressure.patch + + If unsure, say N. + + This driver exposes some configuration registers via sysfs + entries. For further information, + see <file:Documentation/input/elantech.txt>. + + config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" depends on MOUSE_PS2 diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 8e6e6909780..96f1dd8037f 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o psmouse-$(CONFIG_MOUSE_PS2_ALPS) += alps.o +psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o psmouse-$(CONFIG_MOUSE_PS2_OLPC) += hgpk.o psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c new file mode 100644 index 00000000000..b9a25d57bc5 --- /dev/null +++ b/drivers/input/mouse/elantech.c @@ -0,0 +1,674 @@ +/* + * Elantech Touchpad driver (v5) + * + * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/libps2.h> +#include "psmouse.h" +#include "elantech.h" + +#define elantech_debug(format, arg...) \ + do { \ + if (etd->debug) \ + printk(KERN_DEBUG format, ##arg); \ + } while (0) + +/* + * Send a Synaptics style sliced query command + */ +static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, + unsigned char *param) +{ + if (psmouse_sliced_command(psmouse, c) || + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { + pr_err("elantech.c: synaptics_send_cmd query 0x%02x failed.\n", c); + return -1; + } + + return 0; +} + +/* + * A retrying version of ps2_command + */ +static int elantech_ps2_command(struct psmouse *psmouse, + unsigned char *param, int command) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct elantech_data *etd = psmouse->private; + int rc; + int tries = ETP_PS2_COMMAND_TRIES; + + do { + rc = ps2_command(ps2dev, param, command); + if (rc == 0) + break; + tries--; + elantech_debug("elantech.c: retrying ps2 command 0x%02x (%d).\n", + command, tries); + msleep(ETP_PS2_COMMAND_DELAY); + } while (tries > 0); + + if (rc) + pr_err("elantech.c: ps2 command 0x%02x failed.\n", command); + + return rc; +} + +/* + * Send an Elantech style special command to read a value from a register + */ +static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, + unsigned char *val) +{ + struct elantech_data *etd = psmouse->private; + unsigned char param[3]; + int rc = 0; + + if (reg < 0x10 || reg > 0x26) + return -1; + + if (reg > 0x11 && reg < 0x20) + return -1; + + switch (etd->hw_version) { + case 1: + if (psmouse_sliced_command(psmouse, ETP_REGISTER_READ) || + psmouse_sliced_command(psmouse, reg) || + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; + + case 2: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; + } + + if (rc) + pr_err("elantech.c: failed to read register 0x%02x.\n", reg); + else + *val = param[0]; + + return rc; +} + +/* + * Send an Elantech style special command to write a register with a value + */ +static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, + unsigned char val) +{ + struct elantech_data *etd = psmouse->private; + int rc = 0; + + if (reg < 0x10 || reg > 0x26) + return -1; + + if (reg > 0x11 && reg < 0x20) + return -1; + + switch (etd->hw_version) { + case 1: + if (psmouse_sliced_command(psmouse, ETP_REGISTER_WRITE) || + psmouse_sliced_command(psmouse, reg) || + psmouse_sliced_command(psmouse, val) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + + case 2: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + } + + if (rc) + pr_err("elantech.c: failed to write register 0x%02x with value 0x%02x.\n", + reg, val); + + return rc; +} + +/* + * Dump a complete mouse movement packet to the syslog + */ +static void elantech_packet_dump(unsigned char *packet, int size) +{ + int i; + + printk(KERN_DEBUG "elantech.c: PS/2 packet ["); + for (i = 0; i < size; i++) + printk("%s0x%02x ", (i) ? ", " : " ", packet[i]); + printk("]\n"); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 1. (4 byte packets) + */ +static void elantech_report_absolute_v1(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int fingers; + + if (etd->fw_version_maj == 0x01) { + /* byte 0: D U p1 p2 1 p3 R L + byte 1: f 0 th tw x9 x8 y9 y8 */ + fingers = ((packet[1] & 0x80) >> 7) + + ((packet[1] & 0x30) >> 4); + } else { + /* byte 0: n1 n0 p2 p1 1 p3 R L + byte 1: 0 0 0 0 x9 x8 y9 y8 */ + fingers = (packet[0] & 0xc0) >> 6; + } + + input_report_key(dev, BTN_TOUCH, fingers != 0); + + /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 + byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */ + if (fingers) { + input_report_abs(dev, ABS_X, + ((packet[1] & 0x0c) << 6) | packet[2]); + input_report_abs(dev, ABS_Y, ETP_YMAX_V1 - + (((packet[1] & 0x03) << 8) | packet[3])); + } + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + if ((etd->fw_version_maj == 0x01) && + (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + /* rocker up */ + input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); + /* rocker down */ + input_report_key(dev, BTN_BACK, packet[0] & 0x80); + } + + input_sync(dev); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 2. (6 byte packets) + */ +static void elantech_report_absolute_v2(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + unsigned char *packet = psmouse->packet; + int fingers, x1, y1, x2, y2; + + /* byte 0: n1 n0 . . . . R L */ + fingers = (packet[0] & 0xc0) >> 6; + input_report_key(dev, BTN_TOUCH, fingers != 0); + + switch (fingers) { + case 1: + /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8 + byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ + input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]); + /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8 + byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ + input_report_abs(dev, ABS_Y, ETP_YMAX_V2 - + ((packet[4] << 8) | packet[5])); + break; + + case 2: + /* The coordinate of each finger is reported separately with + a lower resolution for two finger touches */ + /* byte 0: . . ay8 ax8 . . . . + byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ + x1 = ((packet[0] & 0x10) << 4) | packet[1]; + /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ + y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); + /* byte 3: . . by8 bx8 . . . . + byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ + x2 = ((packet[3] & 0x10) << 4) | packet[4]; + /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ + y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); + /* For compatibility with the X Synaptics driver scale up one + coordinate and report as ordinary mouse movent */ + input_report_abs(dev, ABS_X, x1 << 2); + input_report_abs(dev, ABS_Y, y1 << 2); + /* For compatibility with the proprietary X Elantech driver + report both coordinates as hat coordinates */ + input_report_abs(dev, ABS_HAT0X, x1); + input_report_abs(dev, ABS_HAT0Y, y1); + input_report_abs(dev, ABS_HAT1X, x2); + input_report_abs(dev, ABS_HAT1Y, y2); + break; + } + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + input_sync(dev); +} + +static int elantech_check_parity_v1(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned char p1, p2, p3; + + /* Parity bits are placed differently */ + if (etd->fw_version_maj == 0x01) { + /* byte 0: D U p1 p2 1 p3 R L */ + p1 = (packet[0] & 0x20) >> 5; + p2 = (packet[0] & 0x10) >> 4; + } else { + /* byte 0: n1 n0 p2 p1 1 p3 R L */ + p1 = (packet[0] & 0x10) >> 4; + p2 = (packet[0] & 0x20) >> 5; + } + + p3 = (packet[0] & 0x04) >> 2; + + return etd->parity[packet[1]] == p1 && + etd->parity[packet[2]] == p2 && + etd->parity[packet[3]] == p3; +} + +/* + * Process byte stream from mouse and handle complete packets + */ +static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + + if (psmouse->pktcnt < psmouse->pktsize) + return PSMOUSE_GOOD_DATA; + + if (etd->debug > 1) + elantech_packet_dump(psmouse->packet, psmouse->pktsize); + + switch (etd->hw_version) { + case 1: + if (etd->paritycheck && !elantech_check_parity_v1(psmouse)) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v1(psmouse); + break; + + case 2: + /* We don't know how to check parity in protocol v2 */ + elantech_report_absolute_v2(psmouse); + break; + } + + return PSMOUSE_FULL_PACKET; +} + +/* + * Put the touchpad into absolute mode + */ +static int elantech_set_absolute_mode(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char val; + int tries = ETP_READ_BACK_TRIES; + int rc = 0; + + switch (etd->hw_version) { + case 1: + etd->reg_10 = 0x16; + etd->reg_11 = 0x8f; + if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || + elantech_write_reg(psmouse, 0x11, etd->reg_11)) { + rc = -1; + } + break; + + case 2: + /* Windows driver values */ + etd->reg_10 = 0x54; + etd->reg_11 = 0x88; /* 0x8a */ + etd->reg_21 = 0x60; /* 0x00 */ + if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || + elantech_write_reg(psmouse, 0x11, etd->reg_11) || + elantech_write_reg(psmouse, 0x21, etd->reg_21)) { + rc = -1; + break; + } + /* + * Read back reg 0x10. The touchpad is probably initalising + * and not ready until we read back the value we just wrote. + */ + do { + rc = elantech_read_reg(psmouse, 0x10, &val); + if (rc == 0) + break; + tries--; + elantech_debug("elantech.c: retrying read (%d).\n", + tries); + msleep(ETP_READ_BACK_DELAY); + } while (tries > 0); + if (rc) + pr_err("elantech.c: failed to read back register 0x10.\n"); + break; + } + + if (rc) + pr_err("elantech.c: failed to initialise registers.\n"); + + return rc; +} + +/* + * Set the appropriate event bits for the input subsystem + */ +static void elantech_set_input_params(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); + + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); + + switch (etd->hw_version) { + case 1: + /* Rocker button */ + if ((etd->fw_version_maj == 0x01) && + (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + __set_bit(BTN_FORWARD, dev->keybit); + __set_bit(BTN_BACK, dev->keybit); + } + input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0); + input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0); + break; + + case 2: + input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT1Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + break; + } +} + +struct elantech_attr_data { + size_t field_offset; + unsigned char reg; +}; + +/* + * Display a register value by reading a sysfs entry + */ +static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data, + char *buf) +{ + struct elantech_data *etd = psmouse->private; + struct elantech_attr_data *attr = data; + unsigned char *reg = (unsigned char *) etd + attr->field_offset; + int rc = 0; + + if (attr->reg) + rc = elantech_read_reg(psmouse, attr->reg, reg); + + return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg); +} + +/* + * Write a register value by writing a sysfs entry + */ +static ssize_t elantech_set_int_attr(struct psmouse *psmouse, + void *data, const char *buf, size_t count) +{ + struct elantech_data *etd = psmouse->private; + struct elantech_attr_data *attr = data; + unsigned char *reg = (unsigned char *) etd + attr->field_offset; + unsigned long value; + int err; + + err = strict_strtoul(buf, 16, &value); + if (err) + return err; + + if (value > 0xff) + return -EINVAL; + + /* Do we need to preserve some bits for version 2 hardware too? */ + if (etd->hw_version == 1) { + if (attr->reg == 0x10) + /* Force absolute mode always on */ + value |= ETP_R10_ABSOLUTE_MODE; + else if (attr->reg == 0x11) + /* Force 4 byte mode always on */ + value |= ETP_R11_4_BYTE_MODE; + } + + if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0) + *reg = value; + + return count; +} + +#define ELANTECH_INT_ATTR(_name, _register) \ + static struct elantech_attr_data elantech_attr_##_name = { \ + .field_offset = offsetof(struct elantech_data, _name), \ + .reg = _register, \ + }; \ + PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ + &elantech_attr_##_name, \ + elantech_show_int_attr, \ + elantech_set_int_attr) + +ELANTECH_INT_ATTR(reg_10, 0x10); +ELANTECH_INT_ATTR(reg_11, 0x11); +ELANTECH_INT_ATTR(reg_20, 0x20); +ELANTECH_INT_ATTR(reg_21, 0x21); +ELANTECH_INT_ATTR(reg_22, 0x22); +ELANTECH_INT_ATTR(reg_23, 0x23); +ELANTECH_INT_ATTR(reg_24, 0x24); +ELANTECH_INT_ATTR(reg_25, 0x25); +ELANTECH_INT_ATTR(reg_26, 0x26); +ELANTECH_INT_ATTR(debug, 0); +ELANTECH_INT_ATTR(paritycheck, 0); + +static struct attribute *elantech_attrs[] = { + &psmouse_attr_reg_10.dattr.attr, + &psmouse_attr_reg_11.dattr.attr, + &psmouse_attr_reg_20.dattr.attr, + &psmouse_attr_reg_21.dattr.attr, + &psmouse_attr_reg_22.dattr.attr, + &psmouse_attr_reg_23.dattr.attr, + &psmouse_attr_reg_24.dattr.attr, + &psmouse_attr_reg_25.dattr.attr, + &psmouse_attr_reg_26.dattr.attr, + &psmouse_attr_debug.dattr.attr, + &psmouse_attr_paritycheck.dattr.attr, + NULL +}; + +static struct attribute_group elantech_attr_group = { + .attrs = elantech_attrs, +}; + +/* + * Use magic knock to detect Elantech touchpad + */ +int elantech_detect(struct psmouse *psmouse, int set_properties) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + pr_err("elantech.c: sending Elantech magic knock failed.\n"); + return -1; + } + + /* + * Report this in case there are Elantech models that use a different + * set of magic numbers + */ + if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) { + pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + return -1; + } + + if (set_properties) { + psmouse->vendor = "Elantech"; + psmouse->name = "Touchpad"; + } + + return 0; +} + +/* + * Clean up sysfs entries when disconnecting + */ +static void elantech_disconnect(struct psmouse *psmouse) +{ + sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); + kfree(psmouse->private); + psmouse->private = NULL; +} + +/* + * Put the touchpad back into absolute mode when reconnecting + */ +static int elantech_reconnect(struct psmouse *psmouse) +{ + if (elantech_detect(psmouse, 0)) + return -1; + + if (elantech_set_absolute_mode(psmouse)) { + pr_err("elantech.c: failed to put touchpad back into absolute mode.\n"); + return -1; + } + + return 0; +} + +/* + * Initialize the touchpad and create sysfs entries + */ +int elantech_init(struct psmouse *psmouse) +{ + struct elantech_data *etd; + int i, error; + unsigned char param[3]; + + etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); + psmouse->private = etd; + if (!etd) + return -1; + + etd->parity[0] = 1; + for (i = 1; i < 256; i++) + etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; + + /* + * Find out what version hardware this is + */ + if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { + pr_err("elantech.c: failed to query firmware version.\n"); + goto init_fail; + } + pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + etd->fw_version_maj = param[0]; + etd->fw_version_min = param[2]; + + /* + * Assume every version greater than this is new EeePC style + * hardware with 6 byte packets + */ + if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) { + etd->hw_version = 2; + /* For now show extra debug information */ + etd->debug = 1; + /* Don't know how to do parity checking for version 2 */ + etd->paritycheck = 0; + } else { + etd->hw_version = 1; + etd->paritycheck = 1; + } + pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n", + etd->hw_version, etd->fw_version_maj, etd->fw_version_min); + + if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { + pr_err("elantech.c: failed to query capabilities.\n"); + goto init_fail; + } + pr_info("elantech.c: Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + etd->capabilities = param[0]; + + if (elantech_set_absolute_mode(psmouse)) { + pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); + goto init_fail; + } + + elantech_set_input_params(psmouse); + + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); + if (error) { + pr_err("elantech.c: failed to create sysfs attributes, error: %d.\n", + error); + goto init_fail; + } + + psmouse->protocol_handler = elantech_process_byte; + psmouse->disconnect = elantech_disconnect; + psmouse->reconnect = elantech_reconnect; + psmouse->pktsize = etd->hw_version == 2 ? 6 : 4; + + return 0; + + init_fail: + kfree(etd); + return -1; +} diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h new file mode 100644 index 00000000000..bee282b540b --- /dev/null +++ b/drivers/input/mouse/elantech.h @@ -0,0 +1,124 @@ +/* + * Elantech Touchpad driver (v5) + * + * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#ifndef _ELANTECH_H +#define _ELANTECH_H + +/* + * Command values for Synaptics style queries + */ +#define ETP_FW_VERSION_QUERY 0x01 +#define ETP_CAPABILITIES_QUERY 0x02 + +/* + * Command values for register reading or writing + */ +#define ETP_REGISTER_READ 0x10 +#define ETP_REGISTER_WRITE 0x11 + +/* + * Hardware version 2 custom PS/2 command value + */ +#define ETP_PS2_CUSTOM_COMMAND 0xf8 + +/* + * Times to retry a ps2_command and millisecond delay between tries + */ +#define ETP_PS2_COMMAND_TRIES 3 +#define ETP_PS2_COMMAND_DELAY 500 + +/* + * Times to try to read back a register and millisecond delay between tries + */ +#define ETP_READ_BACK_TRIES 5 +#define ETP_READ_BACK_DELAY 2000 + +/* + * Register bitmasks for hardware version 1 + */ +#define ETP_R10_ABSOLUTE_MODE 0x04 +#define ETP_R11_4_BYTE_MODE 0x02 + +/* + * Capability bitmasks + */ +#define ETP_CAP_HAS_ROCKER 0x04 + +/* + * One hard to find application note states that X axis range is 0 to 576 + * and Y axis range is 0 to 384 for harware version 1. + * Edge fuzz might be necessary because of bezel around the touchpad + */ +#define ETP_EDGE_FUZZ_V1 32 + +#define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) +#define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1) +#define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) +#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) + +/* + * It seems the resolution for hardware version 2 doubled. + * Hence the X and Y ranges are doubled too. + * The bezel around the pad also appears to be smaller + */ +#define ETP_EDGE_FUZZ_V2 8 + +#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) +#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) +#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) +#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) + +/* + * For two finger touches the coordinate of each finger gets reported + * separately but with reduced resolution. + */ +#define ETP_2FT_FUZZ 4 + +#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ) +#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ) +#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ) +#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ) + +struct elantech_data { + unsigned char reg_10; + unsigned char reg_11; + unsigned char reg_20; + unsigned char reg_21; + unsigned char reg_22; + unsigned char reg_23; + unsigned char reg_24; + unsigned char reg_25; + unsigned char reg_26; + unsigned char debug; + unsigned char capabilities; + unsigned char fw_version_maj; + unsigned char fw_version_min; + unsigned char hw_version; + unsigned char paritycheck; + unsigned char parity[256]; +}; + +#ifdef CONFIG_MOUSE_PS2_ELANTECH +int elantech_detect(struct psmouse *psmouse, int set_properties); +int elantech_init(struct psmouse *psmouse); +#else +static inline int elantech_detect(struct psmouse *psmouse, int set_properties) +{ + return -ENOSYS; +} +static inline int elantech_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif /* CONFIG_MOUSE_PS2_ELANTECH */ + +#endif diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index e82d34201e9..88f04bf2ad6 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse, */ static int hgpk_validate_byte(unsigned char *packet) { - return (packet[0] & 0x0C) == 0x08; + return (packet[0] & 0x0C) != 0x08; } static void hgpk_process_packet(struct psmouse *psmouse) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 126e977e199..f8f86de694b 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -29,6 +29,7 @@ #include "lifebook.h" #include "trackpoint.h" #include "touchkit_ps2.h" +#include "elantech.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -650,6 +651,19 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } +/* + * Try Elantech touchpad. + */ + if (max_proto > PSMOUSE_IMEX && + elantech_detect(psmouse, set_properties) == 0) { + if (!set_properties || elantech_init(psmouse) == 0) + return PSMOUSE_ELANTECH; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) return PSMOUSE_GENPS; @@ -789,6 +803,15 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = hgpk_detect, }, #endif +#ifdef CONFIG_MOUSE_PS2_ELANTECH + { + .type = PSMOUSE_ELANTECH, + .name = "ETPS/2", + .alias = "elantech", + .detect = elantech_detect, + .init = elantech_init, + }, + #endif { .type = PSMOUSE_CORTRON, .name = "CortronPS/2", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 8b608a1cdd1..54ed267894b 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -90,6 +90,7 @@ enum psmouse_type { PSMOUSE_TOUCHKIT_PS2, PSMOUSE_CORTRON, PSMOUSE_HGPK, + PSMOUSE_ELANTECH, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 8137e50ded8..d8c056fe7e9 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -519,7 +519,6 @@ static int mousedev_release(struct inode *inode, struct file *file) struct mousedev_client *client = file->private_data; struct mousedev *mousedev = client->mousedev; - mousedev_fasync(-1, file, 0); mousedev_detach_client(mousedev, client); kfree(client); diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index a321aea2c7b..29e686388a2 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -135,6 +135,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), }, }, + { + .ident = "Blue FB5601", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "blue"), + DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"), + DMI_MATCH(DMI_PRODUCT_VERSION, "M606"), + }, + }, { } }; @@ -329,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "2656"), }, }, + { + .ident = "Dell XPS M1530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), + }, + }, + { + .ident = "Compal HEL80I", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"), + }, + }, { } }; diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 470770c0926..06bbd0e74c6 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -135,7 +135,6 @@ static int serio_raw_release(struct inode *inode, struct file *file) mutex_lock(&serio_raw_mutex); - serio_raw_fasync(-1, file, 0); serio_raw_cleanup(serio_raw); mutex_unlock(&serio_raw_mutex); diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index ca62ec639f8..677680e9f54 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -66,6 +66,7 @@ * - Support Intuos3 4x6 * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX + * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) */ /* @@ -86,7 +87,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.48" +#define DRIVER_VERSION "v1.49" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -103,15 +104,15 @@ struct wacom { struct usb_device *usbdev; struct usb_interface *intf; struct urb *irq; - struct wacom_wac * wacom_wac; + struct wacom_wac *wacom_wac; struct mutex lock; unsigned int open:1; char phys[32]; }; struct wacom_combo { - struct wacom * wacom; - struct urb * urb; + struct wacom *wacom; + struct urb *urb; }; extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); @@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern __u16 wacom_le16_to_cpu(unsigned char *data); extern __u16 wacom_be16_to_cpu(unsigned char *data); -extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); -extern const struct usb_device_id * get_device_table(void); +extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id); +extern const struct usb_device_id *get_device_table(void); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 09e227aa0d4..484496daa0f 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -14,8 +14,41 @@ #include "wacom.h" #include "wacom_wac.h" +/* defines to get HID report descriptor */ +#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01) +#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02) +#define HID_USAGE_UNDEFINED 0x00 +#define HID_USAGE_PAGE 0x05 +#define HID_USAGE_PAGE_DIGITIZER 0x0d +#define HID_USAGE_PAGE_DESKTOP 0x01 +#define HID_USAGE 0x09 +#define HID_USAGE_X 0x30 +#define HID_USAGE_Y 0x31 +#define HID_USAGE_X_TILT 0x3d +#define HID_USAGE_Y_TILT 0x3e +#define HID_USAGE_FINGER 0x22 +#define HID_USAGE_STYLUS 0x20 +#define HID_COLLECTION 0xc0 + +enum { + WCM_UNDEFINED = 0, + WCM_DESKTOP, + WCM_DIGITIZER, +}; + +struct hid_descriptor { + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + +/* defines to get/set USB message */ #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 +#define WAC_HID_FEATURE_REPORT 0x03 static int usb_get_report(struct usb_interface *intf, unsigned char type, unsigned char id, void *buf, int size) @@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb) void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) { input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); - return; } void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) { input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); - return; } void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) { input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); - return; } void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) { input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); - return; } __u16 wacom_be16_to_cpu(unsigned char *data) @@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data) void wacom_input_sync(void *wcombo) { input_sync(get_input_dev((struct wacom_combo *)wcombo)); - return; } static int wacom_open(struct input_dev *dev) @@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev) void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) | BIT_MASK(BTN_5); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); } @@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_4); } @@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->evbit[0] |= BIT_MASK(EV_REL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2); @@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); @@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7); input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); } void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | @@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) | - BIT_MASK(BTN_TOOL_RUBBER); + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2); } void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER); } +static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, + struct wacom_wac *wacom_wac) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct wacom_features *features = wacom_wac->features; + char limit = 0, result = 0; + int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0; + unsigned char *report; + + report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); + if (!report) + return -ENOMEM; + + /* retrive report descriptors */ + do { + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + HID_DEVICET_REPORT << 8, + intf->altsetting[0].desc.bInterfaceNumber, /* interface */ + report, + hid_desc->wDescriptorLength, + 5000); /* 5 secs */ + } while (result < 0 && limit++ < 5); + + if (result < 0) + goto out; + + for (i = 0; i < hid_desc->wDescriptorLength; i++) { + + switch (report[i]) { + case HID_USAGE_PAGE: + switch (report[i + 1]) { + case HID_USAGE_PAGE_DIGITIZER: + usage = WCM_DIGITIZER; + i++; + break; + + case HID_USAGE_PAGE_DESKTOP: + usage = WCM_DESKTOP; + i++; + break; + } + break; + + case HID_USAGE: + switch (report[i + 1]) { + case HID_USAGE_X: + if (usage == WCM_DESKTOP) { + if (finger) { + features->touch_x_max = + features->touch_y_max = + wacom_le16_to_cpu(&report[i + 3]); + features->x_max = + wacom_le16_to_cpu(&report[i + 6]); + i += 7; + } else if (pen) { + features->x_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + } + } else if (usage == WCM_DIGITIZER) { + /* max pressure isn't reported + features->pressure_max = (unsigned short) + (report[i+4] << 8 | report[i + 3]); + */ + features->pressure_max = 255; + i += 4; + } + break; + + case HID_USAGE_Y: + if (usage == WCM_DESKTOP) + features->y_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + + case HID_USAGE_FINGER: + finger = 1; + i++; + break; + + case HID_USAGE_STYLUS: + pen = 1; + i++; + break; + + case HID_USAGE_UNDEFINED: + if (usage == WCM_DESKTOP && finger) /* capacity */ + features->pressure_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + } + break; + + case HID_COLLECTION: + /* reset UsagePage ans Finger */ + finger = usage = 0; + break; + } + } + + result = 0; + + out: + kfree(report); + return result; +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct wacom *wacom; struct wacom_wac *wacom_wac; + struct wacom_features *features; struct input_dev *input_dev; int error = -ENOMEM; char rep_data[2], limit = 0; + struct hid_descriptor *hid_desc; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); @@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - wacom_wac->features = get_wacom_feature(id); - BUG_ON(wacom_wac->features->pktlen > 10); + wacom_wac->features = features = get_wacom_feature(id); + BUG_ON(features->pktlen > 10); input_dev->name = wacom_wac->features->name; wacom->wacom_wac = wacom_wac; @@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_dev->open = wacom_open; input_dev->close = wacom_close; + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ + if (wacom_wac->features->type == TABLETPC) { + if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { + if (usb_get_extra_descriptor(&interface->endpoint[0], + HID_DEVICET_REPORT, &hid_desc)) { + printk("wacom: can not retrive extra class descriptor\n"); + goto fail2; + } + } + error = wacom_parse_hid(intf, hid_desc, wacom_wac); + if (error) + goto fail2; + } + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0); + if (features->type == TABLETPC) { + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP); + input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0); + input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0); + } input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); wacom_init_input_dev(input_dev, wacom_wac); - endpoint = &intf->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(wacom->irq, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), wacom_wac->data, wacom_wac->features->pktlen, @@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i if (error) goto fail3; - /* Ask the tablet to report tablet data. Repeat until it succeeds */ - do { - rep_data[0] = 2; - rep_data[1] = 2; - usb_set_report(intf, 3, 2, rep_data, 2); - usb_get_report(intf, 3, 2, rep_data, 2); - } while (rep_data[1] != 2 && limit++ < 5); + /* + * Ask the tablet to report tablet data if it is not a Tablet PC. + * Repeat until it succeeds + */ + if (wacom_wac->features->type != TABLETPC) { + do { + rep_data[0] = 2; + rep_data[1] = 2; + error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, + 2, rep_data, 2); + if (error >= 0) + error = usb_get_report(intf, + WAC_HID_FEATURE_REPORT, 2, + rep_data, 2); + } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + } usb_set_intfdata(intf, wacom); return 0; @@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf) usb_kill_urb(wacom->irq); input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); + usb_buffer_free(interface_to_usbdev(intf), 10, + wacom->wacom_wac->data, wacom->data_dma); kfree(wacom->wacom_wac); kfree(wacom); } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index bf3d9a8b2c1..8dc8d1e59be 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) return 1; } +int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo) +{ + char *data = wacom->data; + int prox = 0, pressure; + static int stylusInProx, touchInProx = 1, touchOut; + struct urb *urb = ((struct wacom_combo *)wcombo)->urb; + + dbg("wacom_tpc_irq: received report #%d", data[0]); + + if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */ + if (urb->actual_length == 5) { /* with touch */ + prox = data[0] & 0x03; + } else { /* with capacity */ + prox = data[1] & 0x03; + } + + if (!stylusInProx) { /* stylus not in prox */ + if (prox) { + if (touchInProx) { + wacom->tool[1] = BTN_TOOL_DOUBLETAP; + wacom->id[0] = TOUCH_DEVICE_ID; + if (urb->actual_length != 5) { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); + wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6])); + } else { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_key(wcombo, BTN_TOUCH, 1); + } + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + touchOut = 1; + return 1; + } + } else { + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (touchOut || !prox) { /* force touch out-prox */ + wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (data[0] == 2) { /* Penabled */ + prox = data[1] & 0x20; + + touchInProx = 0; + + wacom->id[0] = ERASER_DEVICE_ID; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (prox) { /* in prox */ + if (!wacom->tool[0]) { + /* Going into proximity select tool */ + wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + if (wacom->tool[1] == BTN_TOOL_PEN) + wacom->id[0] = STYLUS_DEVICE_ID; + } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) { + /* + * was entered with stylus2 pressed + * report out proximity for previous tool + */ + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_sync(wcombo); + + /* set new tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + return 0; + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + pressure = ((data[7] & 0x01) << 8) | data[6]; + if (pressure < 0) + pressure = wacom->features->pressure_max + pressure + 1; + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + wacom_report_key(wcombo, BTN_TOUCH, pressure); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + } + wacom_report_key(wcombo, wacom->tool[1], prox); + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + stylusInProx = prox; + wacom->tool[0] = prox; + return 1; + } + return 0; +} + int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) { switch (wacom_wac->features->type) { case PENPARTNER: - return (wacom_penpartner_irq(wacom_wac, wcombo)); - break; + return wacom_penpartner_irq(wacom_wac, wcombo); + case PL: - return (wacom_pl_irq(wacom_wac, wcombo)); - break; + return wacom_pl_irq(wacom_wac, wcombo); + case WACOM_G4: case GRAPHIRE: case WACOM_MO: - return (wacom_graphire_irq(wacom_wac, wcombo)); - break; + return wacom_graphire_irq(wacom_wac, wcombo); + case PTU: - return (wacom_ptu_irq(wacom_wac, wcombo)); - break; + return wacom_ptu_irq(wacom_wac, wcombo); + case INTUOS: case INTUOS3S: case INTUOS3: case INTUOS3L: case CINTIQ: case WACOM_BEE: - return (wacom_intuos_irq(wacom_wac, wcombo)); - break; + return wacom_intuos_irq(wacom_wac, wcombo); + + case TABLETPC: + return wacom_tpc_irq(wacom_wac, wcombo); + default: return 0; } @@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w /* fall through */ case INTUOS3S: input_dev_i3s(input_dev, wacom_wac); + /* fall through */ case INTUOS: input_dev_i(input_dev, wacom_wac); break; case PL: case PTU: + case TABLETPC: input_dev_pl(input_dev, wacom_wac); - break; + /* fall through */ case PENPARTNER: input_dev_pt(input_dev, wacom_wac); break; @@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, { "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO }, { "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO }, + { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, @@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = { { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, { "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE }, { "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE }, + { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL }, + { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { } }; @@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, @@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } }; -const struct usb_device_id * get_device_table(void) { - const struct usb_device_id * id_table = wacom_ids; +const struct usb_device_id *get_device_table(void) +{ + const struct usb_device_id *id_table = wacom_ids; + return id_table; } -struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { +struct wacom_features * get_wacom_feature(const struct usb_device_id *id) +{ int index = id - wacom_ids; struct wacom_features *wf = &wacom_features[index]; + return wf; } diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 3342bc05847..f9c8b69673b 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -10,6 +10,7 @@ #define WACOM_WAC_H #define STYLUS_DEVICE_ID 0x02 +#define TOUCH_DEVICE_ID 0x03 #define CURSOR_DEVICE_ID 0x06 #define ERASER_DEVICE_ID 0x0A #define PAD_DEVICE_ID 0x0F @@ -27,6 +28,7 @@ enum { CINTIQ, WACOM_BEE, WACOM_MO, + TABLETPC, MAX_TYPE }; @@ -38,6 +40,8 @@ struct wacom_features { int pressure_max; int distance_max; int type; + int touch_x_max; + int touch_y_max; }; struct wacom_wac { diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index d20689cdbd5..8f38c5e55ce 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo) input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, " - "features: %x02x, controller: 0x%02x\n", + "features: 0x%02x, controller: 0x%02x\n", elo_types[(packet[1] -'0') & 0x03], packet[5], packet[4], packet[3], packet[7]); diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 3ab6362f043..928d2ed8865 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -323,7 +323,7 @@ static struct xenbus_device_id xenkbd_ids[] = { { "" } }; -static struct xenbus_driver xenkbd = { +static struct xenbus_driver xenkbd_driver = { .name = "vkbd", .owner = THIS_MODULE, .ids = xenkbd_ids, @@ -342,12 +342,12 @@ static int __init xenkbd_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenkbd); + return xenbus_register_frontend(&xenkbd_driver); } static void __exit xenkbd_cleanup(void) { - xenbus_unregister_driver(&xenkbd); + xenbus_unregister_driver(&xenkbd_driver); } module_init(xenkbd_init); |