diff options
Diffstat (limited to 'drivers/input')
28 files changed, 383 insertions, 115 deletions
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index ebf4be5b7c4..2d175b5928f 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list); static struct bus_type gameport_bus; -static void gameport_add_driver(struct gameport_driver *drv); static void gameport_add_port(struct gameport *gameport); -static void gameport_destroy_port(struct gameport *gameport); +static void gameport_attach_driver(struct gameport_driver *drv); static void gameport_reconnect_port(struct gameport *gameport); static void gameport_disconnect_port(struct gameport *gameport); @@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport) enum gameport_event_type { GAMEPORT_REGISTER_PORT, - GAMEPORT_REGISTER_DRIVER, GAMEPORT_ATTACH_DRIVER, }; @@ -374,8 +372,8 @@ static void gameport_handle_event(void) gameport_add_port(event->object); break; - case GAMEPORT_REGISTER_DRIVER: - gameport_add_driver(event->object); + case GAMEPORT_ATTACH_DRIVER: + gameport_attach_driver(event->object); break; default: @@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev) return 0; } -static void gameport_add_driver(struct gameport_driver *drv) +static void gameport_attach_driver(struct gameport_driver *drv) { int error; - error = driver_register(&drv->driver); + error = driver_attach(&drv->driver); if (error) printk(KERN_ERR - "gameport: driver_register() failed for %s, error: %d\n", + "gameport: driver_attach() failed for %s, error: %d\n", drv->driver.name, error); } diff --git a/drivers/input/input.c b/drivers/input/input.c index d44065d2e66..e54e002665b 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -29,6 +29,23 @@ MODULE_LICENSE("GPL"); #define INPUT_DEVICES 256 +/* + * EV_ABS events which should not be cached are listed here. + */ +static unsigned int input_abs_bypass_init_data[] __initdata = { + ABS_MT_TOUCH_MAJOR, + ABS_MT_TOUCH_MINOR, + ABS_MT_WIDTH_MAJOR, + ABS_MT_WIDTH_MINOR, + ABS_MT_ORIENTATION, + ABS_MT_POSITION_X, + ABS_MT_POSITION_Y, + ABS_MT_TOOL_TYPE, + ABS_MT_BLOB_ID, + 0 +}; +static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; + static LIST_HEAD(input_dev_list); static LIST_HEAD(input_handler_list); @@ -161,6 +178,10 @@ static void input_handle_event(struct input_dev *dev, disposition = INPUT_PASS_TO_HANDLERS; } break; + case SYN_MT_REPORT: + dev->sync = 0; + disposition = INPUT_PASS_TO_HANDLERS; + break; } break; @@ -192,6 +213,11 @@ static void input_handle_event(struct input_dev *dev, case EV_ABS: if (is_event_supported(code, dev->absbit, ABS_MAX)) { + if (test_bit(code, input_abs_bypass)) { + disposition = INPUT_PASS_TO_HANDLERS; + break; + } + value = input_defuzz_abs_event(value, dev->abs[code], dev->absfuzz[code]); @@ -1549,7 +1575,6 @@ int input_register_handle(struct input_handle *handle) return error; list_add_tail_rcu(&handle->d_node, &dev->h_list); mutex_unlock(&dev->mutex); - synchronize_rcu(); /* * Since we are supposed to be called from ->connect() @@ -1635,10 +1660,20 @@ static const struct file_operations input_fops = { .open = input_open_file, }; +static void __init input_init_abs_bypass(void) +{ + const unsigned int *p; + + for (p = input_abs_bypass_init_data; *p; p++) + input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p); +} + static int __init input_init(void) { int err; + input_init_abs_bypass(); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f999dc60c3b..444dec07e5d 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -880,7 +880,7 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { }; /* - * Samsung NC10 with Fn+F? key release not working + * Samsung NC10,NC20 with Fn+F? key release not working */ static unsigned int atkbd_samsung_forced_release_keys[] = { 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U @@ -1534,6 +1534,24 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { + .ident = "Samsung NC20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Samsung SQ45S70S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { .ident = "Fujitsu Amilo PA 1510", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index e94b7d735ac..d427f322e20 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) } error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, - IRQF_SAMPLE_RANDOM, DRV_NAME, pdev); + 0, DRV_NAME, pdev); if (error) { printk(KERN_ERR DRV_NAME ": unable to claim irq %d; error %d\n", diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 058fa8b02c2..87ec7b18ac6 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) /* disable keyboard interrupt and schedule for handling */ if (cpu_is_omap24xx()) { int i; - for (i = 0; i < omap_kp->rows; i++) - disable_irq(gpio_to_irq(row_gpios[i])); + + for (i = 0; i < omap_kp->rows; i++) { + int gpio_irq = gpio_to_irq(row_gpios[i]); + /* + * The interrupt which we're currently handling should + * be disabled _nosync() to avoid deadlocks waiting + * for this handler to complete. All others should + * be disabled the regular way for SMP safety. + */ + if (gpio_irq == irq) + disable_irq_nosync(gpio_irq); + else + disable_irq(gpio_irq); + } } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 203abac1e23..5c0a631d145 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -214,7 +214,7 @@ config INPUT_SGI_BTNS config HP_SDC_RTC tristate "HP SDC Real Time Clock" - depends on GSC || HP300 + depends on (GSC || HP300) && SERIO select HP_SDC help Say Y here if you want to support the built-in real time clock diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cbedf957cc5..daecc75c72e 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -37,6 +37,7 @@ #define ALPS_FW_BK_2 0x40 static const struct alps_model_info alps_model_data[] = { + { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 454b96112f0..e0140fdc02a 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output"); */ static int atp_geyser_init(struct usb_device *udev) { - char data[8]; + char *data; int size; int i; + int ret; + + data = kmalloc(8, GFP_KERNEL); + if (!data) { + err("Out of memory"); + return -ENOMEM; + } size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ATP_GEYSER_MODE_READ_REQUEST_ID, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: read error\n"); @@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to read mode from device."); - return -EIO; + ret = -EIO; + goto out_free; } /* Apply the mode switch */ @@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev) ATP_GEYSER_MODE_WRITE_REQUEST_ID, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: write error\n"); @@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to request geyser raw mode"); - return -EIO; + ret = -EIO; + goto out_free; } - return 0; + ret = 0; +out_free: + kfree(data); + return ret; } /* diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2998a6ac9ae..2d8fc0bf692 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -51,6 +51,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +/* Macbook5,1 (unibody), aka wellspring3 */ +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), + /* Macbook5,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), /* Terminating entry */ {} }; @@ -96,14 +104,23 @@ struct bt_data { u8 rel_y; /* relative y coordinate */ }; -/* trackpad header structure */ -struct tp_header { - u8 unknown1[16]; /* constants, timers, etc */ - u8 fingers; /* number of fingers on trackpad */ - u8 unknown2[9]; /* constants, timers, etc */ +/* trackpad header types */ +enum tp_type { + TYPE1, /* plain trackpad */ + TYPE2 /* button integrated in trackpad */ }; -/* trackpad finger structure */ +/* trackpad finger data offsets, le16-aligned */ +#define FINGER_TYPE1 (13 * sizeof(__le16)) +#define FINGER_TYPE2 (15 * sizeof(__le16)) + +/* trackpad button data offsets */ +#define BUTTON_TYPE2 15 + +/* list of device capability bits */ +#define HAS_INTEGRATED_BUTTON 1 + +/* trackpad finger structure, le16-aligned */ struct tp_finger { __le16 origin; /* zero when switching track finger */ __le16 abs_x; /* absolute x coodinate */ @@ -117,13 +134,11 @@ struct tp_finger { __le16 force_minor; /* trackpad force, minor axis? */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ -}; +} __attribute__((packed,aligned(2))); -/* trackpad data structure, empirically at least ten fingers */ -struct tp_data { - struct tp_header header; - struct tp_finger finger[16]; -}; +/* trackpad finger data size, empirically at least ten fingers */ +#define SIZEOF_FINGER sizeof(struct tp_finger) +#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) /* device-specific parameters */ struct bcm5974_param { @@ -136,9 +151,12 @@ struct bcm5974_param { /* device-specific configuration */ struct bcm5974_config { int ansi, iso, jis; /* the product id of this device */ + int caps; /* device capability bitmask */ int bt_ep; /* the endpoint of the button interface */ int bt_datalen; /* data length of the button interface */ int tp_ep; /* the endpoint of the trackpad interface */ + enum tp_type tp_type; /* type of trackpad interface */ + int tp_offset; /* offset to trackpad finger data */ int tp_datalen; /* data length of the trackpad interface */ struct bcm5974_param p; /* finger pressure limits */ struct bcm5974_param w; /* finger width limits */ @@ -158,7 +176,7 @@ struct bcm5974 { struct urb *bt_urb; /* button usb request block */ struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ - struct tp_data *tp_data; /* trackpad transferred data */ + u8 *tp_data; /* trackpad transferred data */ int fingers; /* number of fingers on trackpad */ }; @@ -183,8 +201,9 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, @@ -194,13 +213,26 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING3_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING3_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, + { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + }, {} }; @@ -257,6 +289,7 @@ static void setup_events_to_report(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); } @@ -266,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size) if (size != sizeof(struct bt_data)) return -EIO; + dprintk(7, + "bcm5974: button data: %x %x %x %x\n", + dev->bt_data->unknown1, dev->bt_data->button, + dev->bt_data->rel_x, dev->bt_data->rel_y); + input_report_key(dev->input, BTN_LEFT, dev->bt_data->button); input_sync(dev->input); @@ -276,29 +314,37 @@ static int report_bt_state(struct bcm5974 *dev, int size) static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; - const struct tp_finger *f = dev->tp_data->finger; + const struct tp_finger *f; struct input_dev *input = dev->input; - const int fingers = (size - 26) / 28; - int raw_p, raw_w, raw_x, raw_y; - int ptest = 0, origin = 0, nmin = 0, nmax = 0; + int raw_p, raw_w, raw_x, raw_y, raw_n; + int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; - if (size < 26 || (size - 26) % 28 != 0) + if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; + /* finger data, le16-aligned */ + f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); + raw_n = (size - c->tp_offset) / SIZEOF_FINGER; + /* always track the first finger; when detached, start over */ - if (fingers) { + if (raw_n) { raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); raw_y = raw2int(f->abs_y); dprintk(9, - "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n", - raw_p, raw_w, raw_x, raw_y); + "bcm5974: " + "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", + raw_p, raw_w, raw_x, raw_y, raw_n); ptest = int2bound(&c->p, raw_p); origin = raw2int(f->origin); + + /* set the integrated button if applicable */ + if (c->tp_type == TYPE2) + ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); } /* while tracking finger still valid, count all fingers */ @@ -307,12 +353,13 @@ static int report_tp_state(struct bcm5974 *dev, int size) abs_w = int2bound(&c->w, raw_w); abs_x = int2bound(&c->x, raw_x - c->x.devmin); abs_y = int2bound(&c->y, c->y.devmax - raw_y); - for (; f != dev->tp_data->finger + fingers; f++) { + while (raw_n--) { ptest = int2bound(&c->p, raw2int(f->force_major)); if (ptest > PRESSURE_LOW) nmax++; if (ptest > PRESSURE_HIGH) nmin++; + f++; } } @@ -324,7 +371,8 @@ static int report_tp_state(struct bcm5974 *dev, int size) input_report_key(input, BTN_TOUCH, dev->fingers > 0); input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); + input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); input_report_abs(input, ABS_PRESSURE, abs_p); input_report_abs(input, ABS_TOOL_WIDTH, abs_w); @@ -335,11 +383,15 @@ static int report_tp_state(struct bcm5974 *dev, int size) dprintk(8, "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d\n", - abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers); + "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, + abs_x, abs_y, nmin, nmax, dev->fingers, ibt); } + /* type 2 reports button events via ibt only */ + if (c->tp_type == TYPE2) + input_report_key(input, BTN_LEFT, ibt); + input_sync(input); return 0; @@ -649,6 +701,8 @@ static int bcm5974_probe(struct usb_interface *iface, input_dev->name = "bcm5974"; input_dev->phys = dev->phys; usb_to_input_id(dev->udev, &input_dev->id); + /* report driver capabilities via the version field */ + input_dev->id.version = cfg->caps; input_dev->dev.parent = &iface->dev; input_set_drvdata(input_dev, dev); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6ab0eb1ada1..4bc78892ba9 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; + static int old_fingers; if (etd->fw_version_maj == 0x01) { /* byte 0: D U p1 p2 1 p3 R L @@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) fingers = (packet[0] & 0xc0) >> 6; } + if (etd->jumpy_cursor) { + /* Discard packets that are likely to have bogus coordinates */ + if (fingers > old_fingers) { + elantech_debug("elantech.c: discarding packet\n"); + goto discard_packet_v1; + } + } + input_report_key(dev, BTN_TOUCH, fingers != 0); /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 @@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } input_sync(dev); + + discard_packet_v1: + old_fingers = fingers; } /* @@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) rc = -1; break; } + } + + if (rc == 0) { /* - * Read back reg 0x10. The touchpad is probably initalising - * and not ready until we read back the value we just wrote. + * Read back reg 0x10. For hardware version 1 we must make + * sure the absolute mode bit is set. For hardware version 2 + * the touchpad is probably initalising and not ready until + * we read back the value we just wrote. */ do { rc = elantech_read_reg(psmouse, 0x10, &val); @@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) break; tries--; elantech_debug("elantech.c: retrying read (%d).\n", - tries); + tries); msleep(ETP_READ_BACK_DELAY); } while (tries > 0); - if (rc) + + if (rc) { pr_err("elantech.c: failed to read back register 0x10.\n"); - break; + } else if (etd->hw_version == 1 && + !(val & ETP_R10_ABSOLUTE_MODE)) { + pr_err("elantech.c: touchpad refuses " + "to switch to absolute mode.\n"); + rc = -1; + } } if (rc) @@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse) param[0], param[1], param[2]); etd->capabilities = param[0]; + /* + * This firmware seems to suffer from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { + pr_info("elantech.c: firmware version 2.34 detected, " + "enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = 1; + } + if (elantech_set_absolute_mode(psmouse)) { pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index bee282b540b..ed848cc8081 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -104,6 +104,7 @@ struct elantech_data { unsigned char fw_version_min; unsigned char hw_version; unsigned char paritycheck; + unsigned char jumpy_cursor; unsigned char parity[256]; }; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index df81b0aaa9f..15ac3205ac0 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -61,6 +61,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = { }, }, { + .ident = "Lifebook B-2130", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"), + }, + }, + { .ident = "Lifebook B213x/B2150", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c index d196abfb68b..5f278176eb9 100644 --- a/drivers/input/mouse/maplemouse.c +++ b/drivers/input/mouse/maplemouse.c @@ -2,8 +2,8 @@ * SEGA Dreamcast mouse driver * Based on drivers/usb/usbmouse.c * - * Copyright Yaegashi Takeshi, 2001 - * Adrian McMenamin, 2008 + * Copyright (c) Yaegashi Takeshi, 2001 + * Copyright (c) Adrian McMenamin, 2008 - 2009 */ #include <linux/kernel.h> @@ -29,7 +29,7 @@ static void dc_mouse_callback(struct mapleq *mq) struct maple_device *mapledev = mq->dev; struct dc_mouse *mse = maple_get_drvdata(mapledev); struct input_dev *dev = mse->dev; - unsigned char *res = mq->recvbuf; + unsigned char *res = mq->recvbuf->buf; buttons = ~res[8]; relx = *(unsigned short *)(res + 12) - 512; @@ -47,7 +47,7 @@ static void dc_mouse_callback(struct mapleq *mq) static int dc_mouse_open(struct input_dev *dev) { - struct dc_mouse *mse = dev->dev.platform_data; + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50, MAPLE_FUNC_MOUSE); @@ -57,29 +57,33 @@ static int dc_mouse_open(struct input_dev *dev) static void dc_mouse_close(struct input_dev *dev) { - struct dc_mouse *mse = dev->dev.platform_data; + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); maple_getcond_callback(mse->mdev, dc_mouse_callback, 0, MAPLE_FUNC_MOUSE); } - +/* allow the mouse to be used */ static int __devinit probe_maple_mouse(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); struct maple_driver *mdrv = to_maple_driver(dev->driver); + int error; struct input_dev *input_dev; struct dc_mouse *mse; - int error; mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL); - input_dev = input_allocate_device(); - - if (!mse || !input_dev) { + if (!mse) { error = -ENOMEM; goto fail; } + input_dev = input_allocate_device(); + if (!input_dev) { + error = -ENOMEM; + goto fail_nomem; + } + mse->dev = input_dev; mse->mdev = mdev; @@ -89,25 +93,24 @@ static int __devinit probe_maple_mouse(struct device *dev) BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | BIT_MASK(REL_WHEEL); - input_dev->name = mdev->product_name; - input_dev->id.bustype = BUS_HOST; input_dev->open = dc_mouse_open; input_dev->close = dc_mouse_close; + input_dev->name = mdev->product_name; + input_dev->id.bustype = BUS_HOST; + error = input_register_device(input_dev); + if (error) + goto fail_register; mdev->driver = mdrv; maple_set_drvdata(mdev, mse); - error = input_register_device(input_dev); - if (error) - goto fail; - - return 0; + return error; -fail: +fail_register: input_free_device(input_dev); - maple_set_drvdata(mdev, NULL); +fail_nomem: kfree(mse); - mdev->driver = NULL; +fail: return error; } diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index f63995f854f..3941f97cfa6 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -108,7 +108,6 @@ static int pc110pad_open(struct input_dev *dev) */ static int __init pc110pad_init(void) { - struct pci_dev *dev; int err; if (!no_pci_devices()) diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index bfe49243f38..1c9410d1822 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -819,6 +819,7 @@ static const struct parisc_device_id hp_sdc_tbl[] = { MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl); static int __init hp_sdc_init_hppa(struct parisc_device *d); +static struct delayed_work moduleloader_work; static struct parisc_driver hp_sdc_driver = { .name = "hp_sdc", @@ -930,8 +931,15 @@ static int __init hp_sdc_init(void) #if defined(__hppa__) +static void request_module_delayed(struct work_struct *work) +{ + request_module("hp_sdc_mlc"); +} + static int __init hp_sdc_init_hppa(struct parisc_device *d) { + int ret; + if (!d) return 1; if (hp_sdc.dev != NULL) @@ -944,13 +952,26 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.data_io = d->hpa.start + 0x800; hp_sdc.status_io = d->hpa.start + 0x801; - return hp_sdc_init(); + INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed); + + ret = hp_sdc_init(); + /* after sucessfull initialization give SDC some time to settle + * and then load the hp_sdc_mlc upper layer driver */ + if (!ret) + schedule_delayed_work(&moduleloader_work, + msecs_to_jiffies(2000)); + + return ret; } #endif /* __hppa__ */ static void hp_sdc_exit(void) { + /* do nothing if we don't have a SDC */ + if (!hp_sdc.dev) + return; + write_lock_irq(&hp_sdc.lock); /* Turn off all maskable "sub-function" irq's. */ @@ -969,6 +990,7 @@ static void hp_sdc_exit(void) tasklet_kill(&hp_sdc.task); #if defined(__hppa__) + cancel_delayed_work_sync(&moduleloader_work); if (unregister_parisc_driver(&hp_sdc_driver)) printk(KERN_WARNING PREFIX "Error unregistering HP SDC"); #endif diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 83ed2d56b92..fb8a3cd3ffd 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { } }; +static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, + { + .ident = "LG Electronics X110", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X110"), + DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), + }, + }, + { } +}; + #ifdef CONFIG_PNP static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { { @@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), }, }, + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, { } }; #endif @@ -698,6 +723,9 @@ static int __init i8042_platform_init(void) #endif #ifdef CONFIG_X86 + if (dmi_check_system(i8042_dmi_reset_table)) + i8042_reset = 1; + if (dmi_check_system(i8042_dmi_noloop_table)) i8042_noloop = 1; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 170f71ee577..3cffb704e37 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -712,22 +712,43 @@ static int i8042_controller_check(void) static int i8042_controller_selftest(void) { unsigned char param; + int i = 0; if (!i8042_reset) return 0; - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); - return -ENODEV; - } + /* + * We try this 5 times; on some really fragile systems this does not + * take the first time... + */ + do { + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -ENODEV; + } + + if (param == I8042_RET_CTL_TEST) + return 0; - if (param != I8042_RET_CTL_TEST) { printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); - return -EIO; - } + param, I8042_RET_CTL_TEST); + msleep(50); + } while (i++ < 5); +#ifdef CONFIG_X86 + /* + * On x86, we don't fail entire i8042 initialization if controller + * reset fails in hopes that keyboard port will still be functional + * and user will still get a working keyboard. This is especially + * important on netbooks. On other arches we trust hardware more. + */ + printk(KERN_INFO + "i8042: giving up on controller selftest, continuing anyway...\n"); return 0; +#else + return -EIO; +#endif } /* diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 57953c0eb82..f412c69478a 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id) spin_lock(&ps2if->lock); status = sa1111_readl(ps2if->base + SA1111_PS2STAT); if (ps2if->head == ps2if->tail) { - disable_irq(irq); + disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 677680e9f54..9710bfd49cf 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger <egger@suse.de> * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2008 Ping Cheng <pingc@wacom.com> + * Copyright (c) 2002-2009 Ping Cheng <pingc@wacom.com> * * ChangeLog: * v0.1 (vp) - Initial release @@ -67,6 +67,7 @@ * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) + * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 */ /* @@ -87,7 +88,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.49" +#define DRIVER_VERSION "v1.50" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 484496daa0f..b8624f27abf 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi 5000); /* 5 secs */ } while (result < 0 && limit++ < 5); + /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) goto out; @@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi } } - result = 0; - out: + result = 0; kfree(report); return result; } @@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* Initialize touch_x_max and touch_y_max in case it is not defined */ + if (wacom_wac->features->type == TABLETPC) { + features->touch_x_max = 1023; + features->touch_y_max = 1023; + } else { + features->touch_x_max = 0; + features->touch_y_max = 0; + } + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ if (wacom_wac->features->type == TABLETPC) { if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index e4728a28f49..ecaeb7e8e75 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -736,8 +736,8 @@ static int __devinit ad7877_probe(struct spi_device *spi) /* Request AD7877 /DAV GPIO interrupt */ - err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING | - IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts); + err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING, + spi->dev.driver->name, ts); if (err) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); goto err_free_mem; diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index ea4c61d6868..5d8a7039880 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -448,8 +448,7 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, - IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM, - bus->dev.driver->name, ts); + IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts); if (err) { dev_err(&bus->dev, "irq %d busy?\n", bus->irq); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 056ac77e2cf..2b01e56568f 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -127,6 +127,8 @@ struct ads7846 { void (*filter_cleanup)(void *data); int (*get_pendown_state)(void); int gpio_pendown; + + void (*wait_for_sync)(void); }; /* leave chip selected when we're done, for quicker re-select? */ @@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts) return !gpio_get_value(ts->gpio_pendown); } +static void null_wait_for_sync(void) +{ +} + /* * PENIRQ only kicks the timer. The timer only reissues the SPI transfer, * to retrieve touchscreen status. @@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads) default: BUG(); } + ts->wait_for_sync(); status = spi_async(ts->spi, m); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", @@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) } else { /* pen is still down, continue with the measurement */ ts->msg_idx = 0; + ts->wait_for_sync(); status = spi_async(ts->spi, &ts->msg[0]); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", status); @@ -746,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle) * that here. (The "generic irq" framework may help...) */ ts->irq_disabled = 1; - disable_irq(ts->spi->irq); + disable_irq_nosync(ts->spi->irq); ts->pending = 1; hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); @@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->penirq_recheck_delay_usecs = pdata->penirq_recheck_delay_usecs; + ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); input_dev->name = "ADS784x Touchscreen"; diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index fa67d782c3c..3ffd4c4b170 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006-2008 Marvell International Ltd. * Fengwei Yin <fengwei.yin@marvell.com> + * Bin Yang <bin.yang@marvell.com> * Eric Miao <eric.miao@marvell.com> * * This program is free software; you can redistribute it and/or modify @@ -175,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) goto err_reset; touch->state = STATE_STOP; + + /* FIXME: PEN_{UP/DOWN} events are expected to be + * available by stopping TSI, but this is found not + * always true, delay and simulate such an event + * here is more reliable + */ + mdelay(1); + da9034_event_handler(touch, + is_pen_down(touch) ? EVENT_PEN_DOWN : + EVENT_PEN_UP); break; case STATE_STOP: @@ -189,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) report_pen_up(touch); touch->state = STATE_IDLE; } - - input_sync(touch->input_dev); break; case STATE_WAIT: @@ -200,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) if (is_pen_down(touch)) { start_tsi(touch); touch->state = STATE_BUSY; - } else + } else { + report_pen_up(touch); touch->state = STATE_IDLE; + } break; } return; @@ -226,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb, struct da9034_touch *touch = container_of(nb, struct da9034_touch, notifier); - if (event & DA9034_EVENT_PEN_DOWN) { - if (is_pen_down(touch)) - da9034_event_handler(touch, EVENT_PEN_DOWN); - else - da9034_event_handler(touch, EVENT_PEN_UP); - } - if (event & DA9034_EVENT_TSI_READY) da9034_event_handler(touch, EVENT_TSI_READY); + if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE) + da9034_event_handler(touch, EVENT_PEN_DOWN); + return 0; } @@ -385,6 +392,6 @@ static void __exit da9034_touch_exit(void) module_exit(da9034_touch_exit); MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); -MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:da9034-touch"); diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index dfa6a84ab50..4cc047a5116 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm) #else static void wm97xx_acc_pen_up(struct wm97xx *wm) { - int count = 16; + unsigned int count; + schedule_timeout_uninterruptible(1); - while (count < 16) { + for (count = 0; count < 16; count++) MODR; - count--; - } } #endif diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 4ab07024689..536668fbda2 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -235,7 +235,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { - disable_irq(ts->irq); + disable_irq_nosync(ts->irq); hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); } diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index e868264fe79..f100c7f4c1d 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) struct ucb1400_ts *ucb = devid; if (irqnr == ucb->irq) { - disable_irq(ucb->irq); + disable_irq_nosync(ucb->irq); ucb->irq_pending = 1; wake_up(&ucb->ts_wait); return IRQ_HANDLED; diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index cec480bffe3..69af8385ab1 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) * provided. */ BUG_ON(!wm->mach_ops->irq_enable); - if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, + if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, "wm97xx-pen", wm)) { dev_err(wm->dev, "Failed to register pen down interrupt, polling"); |