summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/keyboard/cap1106.c4
-rw-r--r--drivers/input/keyboard/matrix_keypad.c9
-rw-r--r--drivers/input/mouse/alps.c4
-rw-r--r--drivers/input/mouse/elantech.c11
-rw-r--r--drivers/input/mouse/psmouse-base.c2
-rw-r--r--drivers/input/mouse/synaptics.c68
-rw-r--r--drivers/input/mouse/synaptics.h11
-rw-r--r--drivers/input/mouse/synaptics_usb.c6
-rw-r--r--drivers/input/mouse/trackpoint.c3
-rw-r--r--drivers/input/serio/serport.c45
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c25
-rw-r--r--drivers/input/touchscreen/wm9712.c2
-rw-r--r--drivers/input/touchscreen/wm9713.c2
13 files changed, 155 insertions, 37 deletions
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
index 180b184ab90..d70b65a14ce 100644
--- a/drivers/input/keyboard/cap1106.c
+++ b/drivers/input/keyboard/cap1106.c
@@ -33,8 +33,8 @@
#define CAP1106_REG_SENSOR_CONFIG 0x22
#define CAP1106_REG_SENSOR_CONFIG2 0x23
#define CAP1106_REG_SAMPLING_CONFIG 0x24
-#define CAP1106_REG_CALIBRATION 0x25
-#define CAP1106_REG_INT_ENABLE 0x26
+#define CAP1106_REG_CALIBRATION 0x26
+#define CAP1106_REG_INT_ENABLE 0x27
#define CAP1106_REG_REPEAT_RATE 0x28
#define CAP1106_REG_MT_CONFIG 0x2a
#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 8d2e19e81e1..e651fa692af 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -332,23 +332,24 @@ static int matrix_keypad_init_gpio(struct platform_device *pdev,
}
if (pdata->clustered_irq > 0) {
- err = request_irq(pdata->clustered_irq,
+ err = request_any_context_irq(pdata->clustered_irq,
matrix_keypad_interrupt,
pdata->clustered_irq_flags,
"matrix-keypad", keypad);
- if (err) {
+ if (err < 0) {
dev_err(&pdev->dev,
"Unable to acquire clustered interrupt\n");
goto err_free_rows;
}
} else {
for (i = 0; i < pdata->num_row_gpios; i++) {
- err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ err = request_any_context_irq(
+ gpio_to_irq(pdata->row_gpios[i]),
matrix_keypad_interrupt,
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"matrix-keypad", keypad);
- if (err) {
+ if (err < 0) {
dev_err(&pdev->dev,
"Unable to acquire interrupt for GPIO line %i\n",
pdata->row_gpios[i]);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index a956b980ee7..35a49bf5722 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -2373,6 +2373,10 @@ int alps_init(struct psmouse *psmouse)
dev2->keybit[BIT_WORD(BTN_LEFT)] =
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ __set_bit(INPUT_PROP_POINTER, dev2->propbit);
+ if (priv->flags & ALPS_DUALPOINT)
+ __set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit);
+
if (input_register_device(priv->dev2))
goto init_fail;
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index da51738eb59..06fc6e76ffb 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1331,6 +1331,13 @@ static bool elantech_is_signature_valid(const unsigned char *param)
if (param[1] == 0)
return true;
+ /*
+ * Some models have a revision higher then 20. Meaning param[2] may
+ * be 10 or 20, skip the rates check for these.
+ */
+ if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+ return true;
+
for (i = 0; i < ARRAY_SIZE(rates); i++)
if (param[2] == rates[i])
return false;
@@ -1607,6 +1614,10 @@ int elantech_init(struct psmouse *psmouse)
tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_RIGHT);
+
+ __set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
+ __set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
+
error = input_register_device(etd->tp_dev);
if (error < 0)
goto init_fail_tp_reg;
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index cff065f6261..b4e1f014ddc 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -670,6 +670,8 @@ static void psmouse_apply_defaults(struct psmouse *psmouse)
__set_bit(REL_X, input_dev->relbit);
__set_bit(REL_Y, input_dev->relbit);
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
psmouse->set_rate = psmouse_set_rate;
psmouse->set_resolution = psmouse_set_resolution;
psmouse->poll = psmouse_poll;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index e8573c68f77..fd23181c1fb 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -629,10 +629,61 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
((buf[0] & 0x04) >> 1) |
((buf[3] & 0x04) >> 2));
+ if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+ hw->w == 2) {
+ synaptics_parse_agm(buf, priv, hw);
+ return 1;
+ }
+
+ hw->x = (((buf[3] & 0x10) << 8) |
+ ((buf[1] & 0x0f) << 8) |
+ buf[4]);
+ hw->y = (((buf[3] & 0x20) << 7) |
+ ((buf[1] & 0xf0) << 4) |
+ buf[5]);
+ hw->z = buf[2];
+
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+ /*
+ * ForcePads, like Clickpads, use middle button
+ * bits to report primary button clicks.
+ * Unfortunately they report primary button not
+ * only when user presses on the pad above certain
+ * threshold, but also when there are more than one
+ * finger on the touchpad, which interferes with
+ * out multi-finger gestures.
+ */
+ if (hw->z == 0) {
+ /* No contacts */
+ priv->press = priv->report_press = false;
+ } else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+ /*
+ * Single-finger touch with pressure above
+ * the threshold. If pressure stays long
+ * enough, we'll start reporting primary
+ * button. We rely on the device continuing
+ * sending data even if finger does not
+ * move.
+ */
+ if (!priv->press) {
+ priv->press_start = jiffies;
+ priv->press = true;
+ } else if (time_after(jiffies,
+ priv->press_start +
+ msecs_to_jiffies(50))) {
+ priv->report_press = true;
+ }
+ } else {
+ priv->press = false;
+ }
+
+ hw->left = priv->report_press;
+
+ } else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/*
* Clickpad's button is transmitted as middle button,
* however, since it is primary button, we will report
@@ -651,21 +702,6 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
- if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
- SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
- hw->w == 2) {
- synaptics_parse_agm(buf, priv, hw);
- return 1;
- }
-
- hw->x = (((buf[3] & 0x10) << 8) |
- ((buf[1] & 0x0f) << 8) |
- buf[4]);
- hw->y = (((buf[3] & 0x20) << 7) |
- ((buf[1] & 0xf0) << 4) |
- buf[5]);
- hw->z = buf[2];
-
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
((buf[0] ^ buf[3]) & 0x02)) {
switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index e594af0b264..fb2e076738a 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -78,6 +78,11 @@
* 2 0x08 image sensor image sensor tracks 5 fingers, but only
* reports 2.
* 2 0x20 report min query 0x0f gives min coord reported
+ * 2 0x80 forcepad forcepad is a variant of clickpad that
+ * does not have physical buttons but rather
+ * uses pressure above certain threshold to
+ * report primary clicks. Forcepads also have
+ * clickpad bit set.
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
@@ -86,6 +91,7 @@
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c) ((ex0c) & 0x008000)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
@@ -177,6 +183,11 @@ struct synaptics_data {
*/
struct synaptics_hw_state agm;
bool agm_pending; /* new AGM packet received */
+
+ /* ForcePad handling */
+ unsigned long press_start;
+ bool press;
+ bool report_press;
};
void synaptics_module_init(void);
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
index e122bda16aa..6bcc0189c1c 100644
--- a/drivers/input/mouse/synaptics_usb.c
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -387,6 +387,7 @@ static int synusb_probe(struct usb_interface *intf,
__set_bit(EV_REL, input_dev->evbit);
__set_bit(REL_X, input_dev->relbit);
__set_bit(REL_Y, input_dev->relbit);
+ __set_bit(INPUT_PROP_POINTING_STICK, input_dev->propbit);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0);
} else {
input_set_abs_params(input_dev, ABS_X,
@@ -401,6 +402,11 @@ static int synusb_probe(struct usb_interface *intf,
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
}
+ if (synusb->flags & SYNUSB_TOUCHSCREEN)
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+ else
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
__set_bit(BTN_MIDDLE, input_dev->keybit);
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index ca843b6cf6b..30c8b699880 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -393,6 +393,9 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
if ((button_info & 0x0f) >= 3)
__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+ __set_bit(INPUT_PROP_POINTER, psmouse->dev->propbit);
+ __set_bit(INPUT_PROP_POINTING_STICK, psmouse->dev->propbit);
+
trackpoint_defaults(psmouse->private);
error = trackpoint_power_on_reset(&psmouse->ps2dev);
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 0cb7ef59071..69175b82534 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/tty.h>
+#include <linux/compat.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Input device TTY line discipline");
@@ -198,28 +199,55 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
return 0;
}
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+ struct serport *serport = tty->disc_data;
+
+ serport->id.proto = type & 0x000000ff;
+ serport->id.id = (type & 0x0000ff00) >> 8;
+ serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
/*
* serport_ldisc_ioctl() allows to set the port protocol, and device ID
*/
-static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- struct serport *serport = (struct serport*) tty->disc_data;
- unsigned long type;
-
if (cmd == SPIOCSTYPE) {
+ unsigned long type;
+
if (get_user(type, (unsigned long __user *) arg))
return -EFAULT;
- serport->id.proto = type & 0x000000ff;
- serport->id.id = (type & 0x0000ff00) >> 8;
- serport->id.extra = (type & 0x00ff0000) >> 16;
+ serport_set_type(tty, type);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE _IOW('q', 0x01, compat_ulong_t)
+static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+ struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ if (cmd == COMPAT_SPIOCSTYPE) {
+ void __user *uarg = compat_ptr(arg);
+ compat_ulong_t compat_type;
+
+ if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+ return -EFAULT;
+ serport_set_type(tty, compat_type);
return 0;
}
return -EINVAL;
}
+#endif
static void serport_ldisc_write_wakeup(struct tty_struct * tty)
{
@@ -243,6 +271,9 @@ static struct tty_ldisc_ops serport_ldisc = {
.close = serport_ldisc_close,
.read = serport_ldisc_read,
.ioctl = serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = serport_ldisc_compat_ioctl,
+#endif
.receive_buf = serport_ldisc_receive,
.write_wakeup = serport_ldisc_write_wakeup
};
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index db178ed2b47..aaacf8bfa61 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -837,7 +837,12 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
count = data->msg_buf[0];
if (count == 0) {
- dev_warn(dev, "Interrupt triggered but zero messages\n");
+ /*
+ * This condition is caused by the CHG line being configured
+ * in Mode 0. It results in unnecessary I2C operations but it
+ * is benign.
+ */
+ dev_dbg(dev, "Interrupt triggered but zero messages\n");
return IRQ_NONE;
} else if (count > data->max_reportid) {
dev_err(dev, "T44 count %d exceeded max report id\n", count);
@@ -1374,11 +1379,16 @@ static int mxt_get_info(struct mxt_data *data)
return 0;
}
-static void mxt_free_object_table(struct mxt_data *data)
+static void mxt_free_input_device(struct mxt_data *data)
{
- input_unregister_device(data->input_dev);
- data->input_dev = NULL;
+ if (data->input_dev) {
+ input_unregister_device(data->input_dev);
+ data->input_dev = NULL;
+ }
+}
+static void mxt_free_object_table(struct mxt_data *data)
+{
kfree(data->object_table);
data->object_table = NULL;
kfree(data->msg_buf);
@@ -1957,11 +1967,13 @@ static int mxt_load_fw(struct device *dev, const char *fn)
ret = mxt_lookup_bootloader_address(data, 0);
if (ret)
goto release_firmware;
+
+ mxt_free_input_device(data);
+ mxt_free_object_table(data);
} else {
enable_irq(data->irq);
}
- mxt_free_object_table(data);
reinit_completion(&data->bl_completion);
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
@@ -2210,6 +2222,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return 0;
err_free_object:
+ mxt_free_input_device(data);
mxt_free_object_table(data);
err_free_irq:
free_irq(client->irq, data);
@@ -2224,7 +2237,7 @@ static int mxt_remove(struct i2c_client *client)
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
free_irq(data->irq, data);
- input_unregister_device(data->input_dev);
+ mxt_free_input_device(data);
mxt_free_object_table(data);
kfree(data);
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 16b52115c27..705ffa1e064 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -41,7 +41,7 @@
*/
static int rpu = 8;
module_param(rpu, int, 0);
-MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
/*
* Set current used for pressure measurement.
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 7405353199d..572a5a64fac 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -41,7 +41,7 @@
*/
static int rpu = 8;
module_param(rpu, int, 0);
-MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
/*
* Set current used for pressure measurement.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 18:44:51 +0000