summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/touchscreen/Kconfig60
-rw-r--r--drivers/input/touchscreen/Makefile17
-rw-r--r--drivers/input/touchscreen/usbtouchscreen.c839
3 files changed, 905 insertions, 11 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 971618059a6..5e640aeb03c 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1,5 +1,5 @@
#
-# Mouse driver configuration
+# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
bool "Touchscreens"
@@ -44,9 +44,9 @@ config TOUCHSCREEN_BITSY
config TOUCHSCREEN_CORGI
tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
depends on PXA_SHARPSL
- default y
+ default y
help
- Say Y here to enable the driver for the touchscreen on the
+ Say Y here to enable the driver for the touchscreen on the
Sharp SL-C7xx and SL-Cxx00 series of PDAs.
If unsure, say N.
@@ -164,4 +164,58 @@ config TOUCHSCREEN_UCB1400
To compile this driver as a module, choose M here: the
module will be called ucb1400_ts.
+config TOUCHSCREEN_USB_COMPOSITE
+ tristate "USB Touchscreen Driver"
+ select USB
+ help
+ USB Touchscreen driver for:
+ - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
+ - PanJit TouchSet USB
+ - 3M MicroTouch USB (EX II series)
+ - ITM
+ - some other eTurboTouch
+ - Gunze AHL61
+ - DMC TSC-10/25
+
+ Have a look at <http://linux.chapter7.ch/touchkit/> for
+ a usage description and the required user-space stuff.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbtouchscreen.
+
+config TOUCHSCREEN_USB_EGALAX
+ default y
+ bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_PANJIT
+ default y
+ bool "PanJit device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_3M
+ default y
+ bool "3M/Microtouch EX II series device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ITM
+ default y
+ bool "ITM device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETURBO
+ default y
+ bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GUNZE
+ default y
+ bool "Gunze AHL61 device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_DMC_TSC10
+ default y
+ bool "DMC TSC-10/25 device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 30e6e2217a1..2f86d6ad06d 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -1,17 +1,18 @@
#
-# Makefile for the mouse drivers.
+# Makefile for the touchscreen drivers.
#
# Each configuration option enables a list of files.
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
-obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o
-obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
-obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
-obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
-obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
-obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
+obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
+obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
+obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
+obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
new file mode 100644
index 00000000000..8e18e6c6477
--- /dev/null
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -0,0 +1,839 @@
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ * - eGalax Touchkit
+ * includes eTurboTouch CT-410/510/700
+ * - 3M/Microtouch EX II series
+ * - ITM
+ * - PanJit TouchSet
+ * - eTurboTouch
+ * - Gunze AHL61
+ * - DMC TSC-10/25
+ *
+ * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ * driver from Marius Vollmer
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+
+
+#define DRIVER_VERSION "v0.5"
+#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC "USB Touchscreen Driver"
+
+static int swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+ int min_xc, max_xc;
+ int min_yc, max_yc;
+ int min_press, max_press;
+ int rept_size;
+ int flags;
+
+ void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
+ int (*get_pkt_len) (unsigned char *pkt, int len);
+ int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
+ int (*init) (struct usbtouch_usb *usbtouch);
+};
+
+#define USBTOUCH_FLG_BUFFER 0x01
+
+
+/* a usbtouch device */
+struct usbtouch_usb {
+ unsigned char *data;
+ dma_addr_t data_dma;
+ unsigned char *buffer;
+ int buf_len;
+ struct urb *irq;
+ struct usb_device *udev;
+ struct input_dev *input;
+ struct usbtouch_device_info *type;
+ char name[128];
+ char phys[64];
+
+ int x, y;
+ int touch, press;
+};
+
+
+#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
+#define MULTI_PACKET
+#endif
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+ unsigned char *pkt, int len);
+#endif
+
+/* device types */
+enum {
+ DEVTPYE_DUMMY = -1,
+ DEVTYPE_EGALAX,
+ DEVTYPE_PANJIT,
+ DEVTYPE_3M,
+ DEVTYPE_ITM,
+ DEVTYPE_ETURBO,
+ DEVTYPE_GUNZE,
+ DEVTYPE_DMC_TSC10,
+};
+
+static struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+ {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+ {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+ {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+ {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+ {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+ {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+ {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
+ {}
+};
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+
+#define EGALAX_PKT_TYPE_MASK 0xFE
+#define EGALAX_PKT_TYPE_REPT 0x80
+#define EGALAX_PKT_TYPE_DIAG 0x0A
+
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+ return 0;
+
+ dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+ dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+
+static int egalax_get_pkt_len(unsigned char *buf, int len)
+{
+ switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+ case EGALAX_PKT_TYPE_REPT:
+ return 5;
+
+ case EGALAX_PKT_TYPE_DIAG:
+ if (len < 2)
+ return -1;
+
+ return buf[1] + 2;
+ }
+
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+
+#define MTOUCHUSB_ASYNC_REPORT 1
+#define MTOUCHUSB_RESET 7
+#define MTOUCHUSB_REQ_CTRLLR_ID 10
+
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = (pkt[8] << 8) | pkt[7];
+ dev->y = (pkt[10] << 8) | pkt[9];
+ dev->touch = (pkt[2] & 0x40) ? 1 : 0;
+
+ return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+ int ret, i;
+
+ ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ MTOUCHUSB_RESET,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
+ __FUNCTION__, ret);
+ if (ret < 0)
+ return ret;
+ msleep(150);
+
+ for (i = 0; i < 3; i++) {
+ ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ MTOUCHUSB_ASYNC_REPORT,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+ __FUNCTION__, ret);
+ if (ret >= 0)
+ break;
+ if (ret != -EPIPE)
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ int touch;
+ /*
+ * ITM devices report invalid x/y data if not touched.
+ * if the screen was touched before but is not touched any more
+ * report touch as 0 with the last valid x/y data once. then stop
+ * reporting data until touched again.
+ */
+ dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
+
+ touch = ~pkt[7] & 0x20;
+ if (!touch) {
+ if (dev->touch) {
+ dev->touch = 0;
+ return 1;
+ }
+
+ return 0;
+ }
+
+ dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+ dev->touch = touch;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * eTurboTouch part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ unsigned int shift;
+
+ /* packets should start with sync */
+ if (!(pkt[0] & 0x80))
+ return 0;
+
+ shift = (6 - (pkt[0] & 0x03));
+ dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+ dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+ dev->touch = (pkt[0] & 0x10) ? 1 : 0;
+
+ return 1;
+}
+
+static int eturbo_get_pkt_len(unsigned char *buf, int len)
+{
+ if (buf[0] & 0x80)
+ return 5;
+ if (buf[0] == 0x01)
+ return 3;
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * Gunze part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
+ return 0;
+
+ dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+ dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ dev->touch = pkt[0] & 0x20;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT 0x50
+#define TSC10_RATE_30 0x40
+#define TSC10_RATE_50 0x41
+#define TSC10_RATE_80 0x42
+#define TSC10_RATE_100 0x43
+#define TSC10_RATE_130 0x44
+#define TSC10_RATE_150 0x45
+
+/* commands */
+#define TSC10_CMD_RESET 0x55
+#define TSC10_CMD_RATE 0x05
+#define TSC10_CMD_DATA1 0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = usbtouch->udev;
+ int ret;
+ unsigned char buf[2];
+
+ /* reset */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RESET,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ if (buf[0] != 0x06 || buf[1] != 0x00)
+ return -ENODEV;
+
+ /* set coordinate output rate */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RATE,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ if (buf[0] != 0x06 || buf[1] != 0x00)
+ return -ENODEV;
+
+ /* start sending data */
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_DATA1,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+ [DEVTYPE_EGALAX] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 16,
+ .flags = USBTOUCH_FLG_BUFFER,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = egalax_get_pkt_len,
+ .read_data = egalax_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+ [DEVTYPE_PANJIT] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 8,
+ .read_data = panjit_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+ [DEVTYPE_3M] = {
+ .min_xc = 0x0,
+ .max_xc = 0x4000,
+ .min_yc = 0x0,
+ .max_yc = 0x4000,
+ .rept_size = 11,
+ .read_data = mtouch_read_data,
+ .init = mtouch_init,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+ [DEVTYPE_ITM] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .max_press = 0xff,
+ .rept_size = 8,
+ .read_data = itm_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+ [DEVTYPE_ETURBO] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 8,
+ .flags = USBTOUCH_FLG_BUFFER,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = eturbo_get_pkt_len,
+ .read_data = eturbo_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+ [DEVTYPE_GUNZE] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 4,
+ .read_data = gunze_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+ [DEVTYPE_DMC_TSC10] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .init = dmc_tsc10_init,
+ .read_data = dmc_tsc10_read_data,
+ },
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+ unsigned char *pkt, int len)
+{
+ struct usbtouch_device_info *type = usbtouch->type;
+
+ if (!type->read_data(usbtouch, pkt))
+ return;
+
+ input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
+
+ if (swap_xy) {
+ input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+ input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
+ } else {
+ input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+ input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
+ }
+ if (type->max_press)
+ input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
+ input_sync(usbtouch->input);
+}
+
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+ unsigned char *pkt, int len)
+{
+ unsigned char *buffer;
+ int pkt_len, pos, buf_len, tmp;
+
+ /* process buffer */
+ if (unlikely(usbtouch->buf_len)) {
+ /* try to get size */
+ pkt_len = usbtouch->type->get_pkt_len(
+ usbtouch->buffer, usbtouch->buf_len);
+
+ /* drop? */
+ if (unlikely(!pkt_len))
+ goto out_flush_buf;
+
+ /* need to append -pkt_len bytes before able to get size */
+ if (unlikely(pkt_len < 0)) {
+ int append = -pkt_len;
+ if (unlikely(append > len))
+ append = len;
+ if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
+ goto out_flush_buf;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
+ usbtouch->buf_len += append;
+
+ pkt_len = usbtouch->type->get_pkt_len(
+ usbtouch->buffer, usbtouch->buf_len);
+ if (pkt_len < 0)
+ return;
+ }
+
+ /* append */
+ tmp = pkt_len - usbtouch->buf_len;
+ if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
+ goto out_flush_buf;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+ usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
+
+ buffer = pkt + tmp;
+ buf_len = len - tmp;
+ } else {
+ buffer = pkt;
+ buf_len = len;
+ }
+
+ /* loop over the received packet, process */
+ pos = 0;
+ while (pos < buf_len) {
+ /* get packet len */
+ pkt_len = usbtouch->type->get_pkt_len(buffer + pos, len);
+
+ /* unknown packet: drop everything */
+ if (unlikely(!pkt_len))
+ goto out_flush_buf;
+
+ /* full packet: process */
+ if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
+ usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
+ } else {
+ /* incomplete packet: save in buffer */
+ memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+ usbtouch->buf_len = buf_len - pos;
+ return;
+ }
+ pos += pkt_len;
+ }
+
+out_flush_buf:
+ usbtouch->buf_len = 0;
+ return;
+}
+#endif
+
+
+static void usbtouch_irq(struct urb *urb)
+{
+ struct usbtouch_usb *usbtouch = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ETIME:
+ /* this urb is timing out */
+ dbg("%s - urb timed out - was the device unplugged?",
+ __FUNCTION__);
+ return;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ err("%s - usb_submit_urb failed with result: %d",
+ __FUNCTION__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+ struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+
+ usbtouch->irq->dev = usbtouch->udev;
+
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+ struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+
+ usb_kill_urb(usbtouch->irq);
+}
+
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+ struct usbtouch_usb *usbtouch)
+{
+ usb_buffer_free(udev, usbtouch->type->rept_size,
+ usbtouch->data, usbtouch->data_dma);
+ kfree(usbtouch->buffer);
+}
+
+
+static int usbtouch_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usbtouch_usb *usbtouch;
+ struct input_dev *input_dev;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usbtouch_device_info *type;
+ int err = -ENOMEM;
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+
+ usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!usbtouch || !input_dev)
+ goto out_free;
+
+ type = &usbtouch_dev_info[id->driver_info];
+ usbtouch->type = type;
+ if (!type->process_pkt)
+ type->process_pkt = usbtouch_process_pkt;
+
+ usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
+ GFP_KERNEL, &usbtouch->data_dma);
+ if (!usbtouch->data)
+ goto out_free;
+
+ if (type->flags & USBTOUCH_FLG_BUFFER) {
+ usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+ if (!usbtouch->buffer)
+ goto out_free_buffers;
+ }
+
+ usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!usbtouch->irq) {
+ dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__);
+ goto out_free_buffers;
+ }
+
+ usbtouch->udev = udev;
+ usbtouch->input = input_dev;
+
+ if (udev->manufacturer)
+ strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+ strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+ }
+
+ if (!strlen(usbtouch->name))
+ snprintf(usbtouch->name, sizeof(usbtouch->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+ strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+ input_dev->name = usbtouch->name;
+ input_dev->phys = usbtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, usbtouch);
+
+ input_dev->open = usbtouch_open;
+ input_dev->close = usbtouch_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+ if (type->max_press)
+ input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+ type->max_press, 0, 0);
+
+ usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
+ usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
+ usbtouch->data, type->rept_size,
+ usbtouch_irq, usbtouch, endpoint->bInterval);
+
+ usbtouch->irq->dev = usbtouch->udev;
+ usbtouch->irq->transfer_dma = usbtouch->data_dma;
+ usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* device specific init */
+ if (type->init) {
+ err = type->init(usbtouch);
+ if (err) {
+ dbg("%s - type->init() failed, err: %d", __FUNCTION__, err);
+ goto out_free_buffers;
+ }
+ }
+
+ err = input_register_device(usbtouch->input);
+ if (err) {
+ dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err);
+ goto out_free_buffers;
+ }
+
+ usb_set_intfdata(intf, usbtouch);
+
+ return 0;
+
+out_free_buffers:
+ usbtouch_free_buffers(udev, usbtouch);
+out_free:
+ input_free_device(input_dev);
+ kfree(usbtouch);
+ return err;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+ struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+ dbg("%s - called", __FUNCTION__);
+
+ if (!usbtouch)
+ return;
+
+ dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__);
+ usb_set_intfdata(intf, NULL);
+ usb_kill_urb(usbtouch->irq);
+ input_unregister_device(usbtouch->input);
+ usb_free_urb(usbtouch->irq);
+ usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+ kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+ .name = "usbtouchscreen",
+ .probe = usbtouch_probe,
+ .disconnect = usbtouch_disconnect,
+ .id_table = usbtouch_devices,
+};
+
+static int __init usbtouch_init(void)
+{
+ return usb_register(&usbtouch_driver);
+}
+
+static void __exit usbtouch_cleanup(void)
+{
+ usb_deregister(&usbtouch_driver);
+}
+
+module_init(usbtouch_init);
+module_exit(usbtouch_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 12:31:05 +0000