diff options
Diffstat (limited to 'drivers/isdn/hardware/eicon/os_pri.c')
-rw-r--r-- | drivers/isdn/hardware/eicon/os_pri.c | 1051 |
1 files changed, 1051 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/eicon/os_pri.c b/drivers/isdn/hardware/eicon/os_pri.c new file mode 100644 index 00000000000..8ac207f75e5 --- /dev/null +++ b/drivers/isdn/hardware/eicon/os_pri.c @@ -0,0 +1,1051 @@ +/* $Id: os_pri.c,v 1.32 2004/03/21 17:26:01 armin Exp $ */ + +#include "platform.h" +#include "debuglib.h" +#include "cardtype.h" +#include "pc.h" +#include "pr_pc.h" +#include "di_defs.h" +#include "dsp_defs.h" +#include "di.h" +#include "io.h" + +#include "xdi_msg.h" +#include "xdi_adapter.h" +#include "os_pri.h" +#include "diva_pci.h" +#include "mi_pc.h" +#include "pc_maint.h" +#include "dsp_tst.h" +#include "diva_dma.h" + +/* -------------------------------------------------------------------------- + OS Dependent part of XDI driver for DIVA PRI Adapter + + DSP detection/validation by Anthony Booth (Eicon Networks, www.eicon.com) +-------------------------------------------------------------------------- */ + +#define DIVA_PRI_NO_PCI_BIOS_WORKAROUND 1 + +extern int diva_card_read_xlog(diva_os_xdi_adapter_t * a); + +/* +** IMPORTS +*/ +extern void prepare_pri_functions(PISDN_ADAPTER IoAdapter); +extern void prepare_pri2_functions(PISDN_ADAPTER IoAdapter); +extern void diva_xdi_display_adapter_features(int card); + +static int diva_pri_cleanup_adapter(diva_os_xdi_adapter_t * a); +static int diva_pri_cmd_card_proc(struct _diva_os_xdi_adapter *a, + diva_xdi_um_cfg_cmd_t * cmd, int length); +static int pri_get_serial_number(diva_os_xdi_adapter_t * a); +static int diva_pri_stop_adapter(diva_os_xdi_adapter_t * a); +static dword diva_pri_detect_dsps(diva_os_xdi_adapter_t * a); + +/* +** Check card revision +*/ +static int pri_is_rev_2_card(int card_ordinal) +{ + switch (card_ordinal) { + case CARDTYPE_DIVASRV_P_30M_V2_PCI: + case CARDTYPE_DIVASRV_VOICE_P_30M_V2_PCI: + return (1); + } + return (0); +} + +static void diva_pri_set_addresses(diva_os_xdi_adapter_t * a) +{ + a->resources.pci.mem_type_id[MEM_TYPE_ADDRESS] = 0; + a->resources.pci.mem_type_id[MEM_TYPE_CONTROL] = 2; + a->resources.pci.mem_type_id[MEM_TYPE_CONFIG] = 4; + a->resources.pci.mem_type_id[MEM_TYPE_RAM] = 0; + a->resources.pci.mem_type_id[MEM_TYPE_RESET] = 2; + a->resources.pci.mem_type_id[MEM_TYPE_CFG] = 4; + a->resources.pci.mem_type_id[MEM_TYPE_PROM] = 3; + + a->xdi_adapter.Address = a->resources.pci.addr[0]; + a->xdi_adapter.Control = a->resources.pci.addr[2]; + a->xdi_adapter.Config = a->resources.pci.addr[4]; + + a->xdi_adapter.ram = a->resources.pci.addr[0]; + a->xdi_adapter.ram += MP_SHARED_RAM_OFFSET; + + a->xdi_adapter.reset = a->resources.pci.addr[2]; + a->xdi_adapter.reset += MP_RESET; + + a->xdi_adapter.cfg = a->resources.pci.addr[4]; + a->xdi_adapter.cfg += MP_IRQ_RESET; + + a->xdi_adapter.sdram_bar = a->resources.pci.bar[0]; + + a->xdi_adapter.prom = a->resources.pci.addr[3]; +} + +/* +** BAR0 - SDRAM, MP_MEMORY_SIZE, MP2_MEMORY_SIZE by Rev.2 +** BAR1 - DEVICES, 0x1000 +** BAR2 - CONTROL (REG), 0x2000 +** BAR3 - FLASH (REG), 0x8000 +** BAR4 - CONFIG (CFG), 0x1000 +*/ +int diva_pri_init_card(diva_os_xdi_adapter_t * a) +{ + int bar = 0; + int pri_rev_2; + unsigned long bar_length[5] = { + MP_MEMORY_SIZE, + 0x1000, + 0x2000, + 0x8000, + 0x1000 + }; + + pri_rev_2 = pri_is_rev_2_card(a->CardOrdinal); + + if (pri_rev_2) { + bar_length[0] = MP2_MEMORY_SIZE; + } + /* + Set properties + */ + a->xdi_adapter.Properties = CardProperties[a->CardOrdinal]; + DBG_LOG(("Load %s", a->xdi_adapter.Properties.Name)) + + /* + First initialization step: get and check hardware resoures. + Do not map resources and do not acecess card at this step + */ + for (bar = 0; bar < 5; bar++) { + a->resources.pci.bar[bar] = + divasa_get_pci_bar(a->resources.pci.bus, + a->resources.pci.func, bar, + a->resources.pci.hdev); + if (!a->resources.pci.bar[bar] + || (a->resources.pci.bar[bar] == 0xFFFFFFF0)) { + DBG_ERR(("A: invalid bar[%d]=%08x", bar, + a->resources.pci.bar[bar])) + return (-1); + } + } + a->resources.pci.irq = + (byte) divasa_get_pci_irq(a->resources.pci.bus, + a->resources.pci.func, + a->resources.pci.hdev); + if (!a->resources.pci.irq) { + DBG_ERR(("A: invalid irq")); + return (-1); + } + + /* + Map all BAR's + */ + for (bar = 0; bar < 5; bar++) { + a->resources.pci.addr[bar] = + divasa_remap_pci_bar(a, bar, a->resources.pci.bar[bar], + bar_length[bar]); + if (!a->resources.pci.addr[bar]) { + DBG_ERR(("A: A(%d), can't map bar[%d]", + a->controller, bar)) + diva_pri_cleanup_adapter(a); + return (-1); + } + } + + /* + Set all memory areas + */ + diva_pri_set_addresses(a); + + /* + Get Serial Number of this adapter + */ + if (pri_get_serial_number(a)) { + dword serNo; + serNo = a->resources.pci.bar[1] & 0xffff0000; + serNo |= ((dword) a->resources.pci.bus) << 8; + serNo += (a->resources.pci.func + a->controller + 1); + a->xdi_adapter.serialNo = serNo & ~0xFF000000; + DBG_ERR(("A: A(%d) can't get Serial Number, generated serNo=%ld", + a->controller, a->xdi_adapter.serialNo)) + } + + + /* + Initialize os objects + */ + if (diva_os_initialize_spin_lock(&a->xdi_adapter.isr_spin_lock, "isr")) { + diva_pri_cleanup_adapter(a); + return (-1); + } + if (diva_os_initialize_spin_lock + (&a->xdi_adapter.data_spin_lock, "data")) { + diva_pri_cleanup_adapter(a); + return (-1); + } + + strcpy(a->xdi_adapter.req_soft_isr.dpc_thread_name, "kdivasprid"); + + if (diva_os_initialize_soft_isr(&a->xdi_adapter.req_soft_isr, + DIDpcRoutine, &a->xdi_adapter)) { + diva_pri_cleanup_adapter(a); + return (-1); + } + + /* + Do not initialize second DPC - only one thread will be created + */ + a->xdi_adapter.isr_soft_isr.object = + a->xdi_adapter.req_soft_isr.object; + + /* + Next step of card initialization: + set up all interface pointers + */ + a->xdi_adapter.Channels = CardProperties[a->CardOrdinal].Channels; + a->xdi_adapter.e_max = CardProperties[a->CardOrdinal].E_info; + + a->xdi_adapter.e_tbl = + diva_os_malloc(0, a->xdi_adapter.e_max * sizeof(E_INFO)); + if (!a->xdi_adapter.e_tbl) { + diva_pri_cleanup_adapter(a); + return (-1); + } + memset(a->xdi_adapter.e_tbl, 0x00, a->xdi_adapter.e_max * sizeof(E_INFO)); + + a->xdi_adapter.a.io = &a->xdi_adapter; + a->xdi_adapter.DIRequest = request; + a->interface.cleanup_adapter_proc = diva_pri_cleanup_adapter; + a->interface.cmd_proc = diva_pri_cmd_card_proc; + + if (pri_rev_2) { + prepare_pri2_functions(&a->xdi_adapter); + } else { + prepare_pri_functions(&a->xdi_adapter); + } + + a->dsp_mask = diva_pri_detect_dsps(a); + + /* + Allocate DMA map + */ + if (pri_rev_2) { + diva_init_dma_map(a->resources.pci.hdev, + (struct _diva_dma_map_entry **) &a->xdi_adapter.dma_map, 32); + } + + /* + Set IRQ handler + */ + a->xdi_adapter.irq_info.irq_nr = a->resources.pci.irq; + sprintf(a->xdi_adapter.irq_info.irq_name, + "DIVA PRI %ld", (long) a->xdi_adapter.serialNo); + + if (diva_os_register_irq(a, a->xdi_adapter.irq_info.irq_nr, + a->xdi_adapter.irq_info.irq_name)) { + diva_pri_cleanup_adapter(a); + return (-1); + } + a->xdi_adapter.irq_info.registered = 1; + + diva_log_info("%s IRQ:%d SerNo:%d", a->xdi_adapter.Properties.Name, + a->resources.pci.irq, a->xdi_adapter.serialNo); + + return (0); +} + +static int diva_pri_cleanup_adapter(diva_os_xdi_adapter_t * a) +{ + int bar = 0; + + /* + Stop Adapter if adapter is running + */ + if (a->xdi_adapter.Initialized) { + diva_pri_stop_adapter(a); + } + + /* + Remove ISR Handler + */ + if (a->xdi_adapter.irq_info.registered) { + diva_os_remove_irq(a, a->xdi_adapter.irq_info.irq_nr); + } + a->xdi_adapter.irq_info.registered = 0; + + /* + Step 1: unmap all BAR's, if any was mapped + */ + for (bar = 0; bar < 5; bar++) { + if (a->resources.pci.bar[bar] + && a->resources.pci.addr[bar]) { + divasa_unmap_pci_bar(a->resources.pci.addr[bar]); + a->resources.pci.bar[bar] = 0; + a->resources.pci.addr[bar] = NULL; + } + } + + /* + Free OS objects + */ + diva_os_cancel_soft_isr(&a->xdi_adapter.isr_soft_isr); + diva_os_cancel_soft_isr(&a->xdi_adapter.req_soft_isr); + + diva_os_remove_soft_isr(&a->xdi_adapter.req_soft_isr); + a->xdi_adapter.isr_soft_isr.object = NULL; + + diva_os_destroy_spin_lock(&a->xdi_adapter.isr_spin_lock, "rm"); + diva_os_destroy_spin_lock(&a->xdi_adapter.data_spin_lock, "rm"); + + /* + Free memory accupied by XDI adapter + */ + if (a->xdi_adapter.e_tbl) { + diva_os_free(0, a->xdi_adapter.e_tbl); + a->xdi_adapter.e_tbl = NULL; + } + a->xdi_adapter.Channels = 0; + a->xdi_adapter.e_max = 0; + + + /* + Free adapter DMA map + */ + diva_free_dma_map(a->resources.pci.hdev, + (struct _diva_dma_map_entry *) a->xdi_adapter. + dma_map); + a->xdi_adapter.dma_map = NULL; + + + /* + Detach this adapter from debug driver + */ + + return (0); +} + +/* +** Activate On Board Boot Loader +*/ +static int diva_pri_reset_adapter(PISDN_ADAPTER IoAdapter) +{ + dword i; + struct mp_load __iomem *boot; + + if (!IoAdapter->Address || !IoAdapter->reset) { + return (-1); + } + if (IoAdapter->Initialized) { + DBG_ERR(("A: A(%d) can't reset PRI adapter - please stop first", + IoAdapter->ANum)) + return (-1); + } + + boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter); + WRITE_DWORD(&boot->err, 0); + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + + IoAdapter->rstFnc(IoAdapter); + + diva_os_wait(10); + + boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter); + i = READ_DWORD(&boot->live); + + diva_os_wait(10); + if (i == READ_DWORD(&boot->live)) { + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + DBG_ERR(("A: A(%d) CPU on PRI %ld is not alive!", + IoAdapter->ANum, IoAdapter->serialNo)) + return (-1); + } + if (READ_DWORD(&boot->err)) { + DBG_ERR(("A: A(%d) PRI %ld Board Selftest failed, error=%08lx", + IoAdapter->ANum, IoAdapter->serialNo, + READ_DWORD(&boot->err))) + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + return (-1); + } + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + + /* + Forget all outstanding entities + */ + IoAdapter->e_count = 0; + if (IoAdapter->e_tbl) { + memset(IoAdapter->e_tbl, 0x00, + IoAdapter->e_max * sizeof(E_INFO)); + } + IoAdapter->head = 0; + IoAdapter->tail = 0; + IoAdapter->assign = 0; + IoAdapter->trapped = 0; + + memset(&IoAdapter->a.IdTable[0], 0x00, + sizeof(IoAdapter->a.IdTable)); + memset(&IoAdapter->a.IdTypeTable[0], 0x00, + sizeof(IoAdapter->a.IdTypeTable)); + memset(&IoAdapter->a.FlowControlIdTable[0], 0x00, + sizeof(IoAdapter->a.FlowControlIdTable)); + memset(&IoAdapter->a.FlowControlSkipTable[0], 0x00, + sizeof(IoAdapter->a.FlowControlSkipTable)); + memset(&IoAdapter->a.misc_flags_table[0], 0x00, + sizeof(IoAdapter->a.misc_flags_table)); + memset(&IoAdapter->a.rx_stream[0], 0x00, + sizeof(IoAdapter->a.rx_stream)); + memset(&IoAdapter->a.tx_stream[0], 0x00, + sizeof(IoAdapter->a.tx_stream)); + memset(&IoAdapter->a.tx_pos[0], 0x00, sizeof(IoAdapter->a.tx_pos)); + memset(&IoAdapter->a.rx_pos[0], 0x00, sizeof(IoAdapter->a.rx_pos)); + + return (0); +} + +static int +diva_pri_write_sdram_block(PISDN_ADAPTER IoAdapter, + dword address, + const byte * data, dword length, dword limit) +{ + byte __iomem *p = DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter); + byte __iomem *mem = p; + + if (((address + length) >= limit) || !mem) { + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, p); + DBG_ERR(("A: A(%d) write PRI address=0x%08lx", + IoAdapter->ANum, address + length)) + return (-1); + } + mem += address; + + /* memcpy_toio(), maybe? */ + while (length--) { + WRITE_BYTE(mem++, *data++); + } + + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, p); + return (0); +} + +static int +diva_pri_start_adapter(PISDN_ADAPTER IoAdapter, + dword start_address, dword features) +{ + dword i; + int started = 0; + byte __iomem *p; + struct mp_load __iomem *boot = (struct mp_load __iomem *) DIVA_OS_MEM_ATTACH_ADDRESS(IoAdapter); + ADAPTER *a = &IoAdapter->a; + + if (IoAdapter->Initialized) { + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + DBG_ERR(("A: A(%d) pri_start_adapter, adapter already running", + IoAdapter->ANum)) + return (-1); + } + if (!boot) { + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + DBG_ERR(("A: PRI %ld can't start, adapter not mapped", + IoAdapter->serialNo)) + return (-1); + } + + sprintf(IoAdapter->Name, "A(%d)", (int) IoAdapter->ANum); + DBG_LOG(("A(%d) start PRI at 0x%08lx", IoAdapter->ANum, + start_address)) + + WRITE_DWORD(&boot->addr, start_address); + WRITE_DWORD(&boot->cmd, 3); + + for (i = 0; i < 300; ++i) { + diva_os_wait(10); + if ((READ_DWORD(&boot->signature) >> 16) == 0x4447) { + DBG_LOG(("A(%d) Protocol startup time %d.%02d seconds", + IoAdapter->ANum, (i / 100), (i % 100))) + started = 1; + break; + } + } + + if (!started) { + byte __iomem *p = (byte __iomem *)boot; + dword TrapId; + dword debug; + TrapId = READ_DWORD(&p[0x80]); + debug = READ_DWORD(&p[0x1c]); + DBG_ERR(("A(%d) Adapter start failed 0x%08lx, TrapId=%08lx, debug=%08lx", + IoAdapter->ANum, READ_DWORD(&boot->signature), + TrapId, debug)) + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + if (IoAdapter->trapFnc) { + (*(IoAdapter->trapFnc)) (IoAdapter); + } + IoAdapter->stop(IoAdapter); + return (-1); + } + DIVA_OS_MEM_DETACH_ADDRESS(IoAdapter, boot); + + IoAdapter->Initialized = TRUE; + + /* + Check Interrupt + */ + IoAdapter->IrqCount = 0; + p = DIVA_OS_MEM_ATTACH_CFG(IoAdapter); + WRITE_DWORD(p, (dword) ~ 0x03E00000); + DIVA_OS_MEM_DETACH_CFG(IoAdapter, p); + a->ReadyInt = 1; + a->ram_out(a, &PR_RAM->ReadyInt, 1); + + for (i = 100; !IoAdapter->IrqCount && (i-- > 0); diva_os_wait(10)); + + if (!IoAdapter->IrqCount) { + DBG_ERR(("A: A(%d) interrupt test failed", + IoAdapter->ANum)) + IoAdapter->Initialized = FALSE; + IoAdapter->stop(IoAdapter); + return (-1); + } + + IoAdapter->Properties.Features = (word) features; + + diva_xdi_display_adapter_features(IoAdapter->ANum); + + DBG_LOG(("A(%d) PRI adapter successfull started", IoAdapter->ANum)) + /* + Register with DIDD + */ + diva_xdi_didd_register_adapter(IoAdapter->ANum); + + return (0); +} + +static void diva_pri_clear_interrupts(diva_os_xdi_adapter_t * a) +{ + PISDN_ADAPTER IoAdapter = &a->xdi_adapter; + + /* + clear any pending interrupt + */ + IoAdapter->disIrq(IoAdapter); + + IoAdapter->tst_irq(&IoAdapter->a); + IoAdapter->clr_irq(&IoAdapter->a); + IoAdapter->tst_irq(&IoAdapter->a); + + /* + kill pending dpcs + */ + diva_os_cancel_soft_isr(&IoAdapter->req_soft_isr); + diva_os_cancel_soft_isr(&IoAdapter->isr_soft_isr); +} + +/* +** Stop Adapter, but do not unmap/unregister - adapter +** will be restarted later +*/ +static int diva_pri_stop_adapter(diva_os_xdi_adapter_t * a) +{ + PISDN_ADAPTER IoAdapter = &a->xdi_adapter; + int i = 100; + + if (!IoAdapter->ram) { + return (-1); + } + if (!IoAdapter->Initialized) { + DBG_ERR(("A: A(%d) can't stop PRI adapter - not running", + IoAdapter->ANum)) + return (-1); /* nothing to stop */ + } + IoAdapter->Initialized = 0; + + /* + Disconnect Adapter from DIDD + */ + diva_xdi_didd_remove_adapter(IoAdapter->ANum); + + /* + Stop interrupts + */ + a->clear_interrupts_proc = diva_pri_clear_interrupts; + IoAdapter->a.ReadyInt = 1; + IoAdapter->a.ram_inc(&IoAdapter->a, &PR_RAM->ReadyInt); + do { + diva_os_sleep(10); + } while (i-- && a->clear_interrupts_proc); + + if (a->clear_interrupts_proc) { + diva_pri_clear_interrupts(a); + a->clear_interrupts_proc = NULL; + DBG_ERR(("A: A(%d) no final interrupt from PRI adapter", + IoAdapter->ANum)) + } + IoAdapter->a.ReadyInt = 0; + + /* + Stop and reset adapter + */ + IoAdapter->stop(IoAdapter); + + return (0); +} + +/* +** Process commands form configuration/download framework and from +** user mode +** +** return 0 on success +*/ +static int +diva_pri_cmd_card_proc(struct _diva_os_xdi_adapter *a, + diva_xdi_um_cfg_cmd_t * cmd, int length) +{ + int ret = -1; + + if (cmd->adapter != a->controller) { + DBG_ERR(("A: pri_cmd, invalid controller=%d != %d", + cmd->adapter, a->controller)) + return (-1); + } + + switch (cmd->command) { + case DIVA_XDI_UM_CMD_GET_CARD_ORDINAL: + a->xdi_mbox.data_length = sizeof(dword); + a->xdi_mbox.data = + diva_os_malloc(0, a->xdi_mbox.data_length); + if (a->xdi_mbox.data) { + *(dword *) a->xdi_mbox.data = + (dword) a->CardOrdinal; + a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY; + ret = 0; + } + break; + + case DIVA_XDI_UM_CMD_GET_SERIAL_NR: + a->xdi_mbox.data_length = sizeof(dword); + a->xdi_mbox.data = + diva_os_malloc(0, a->xdi_mbox.data_length); + if (a->xdi_mbox.data) { + *(dword *) a->xdi_mbox.data = + (dword) a->xdi_adapter.serialNo; + a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY; + ret = 0; + } + break; + + case DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG: + a->xdi_mbox.data_length = sizeof(dword) * 9; + a->xdi_mbox.data = + diva_os_malloc(0, a->xdi_mbox.data_length); + if (a->xdi_mbox.data) { + int i; + dword *data = (dword *) a->xdi_mbox.data; + + for (i = 0; i < 8; i++) { + *data++ = a->resources.pci.bar[i]; + } + *data++ = (dword) a->resources.pci.irq; + a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY; + ret = 0; + } + break; + + case DIVA_XDI_UM_CMD_RESET_ADAPTER: + ret = diva_pri_reset_adapter(&a->xdi_adapter); + break; + + case DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK: + ret = diva_pri_write_sdram_block(&a->xdi_adapter, + cmd->command_data. + write_sdram.offset, + (byte *) & cmd[1], + cmd->command_data. + write_sdram.length, + pri_is_rev_2_card(a-> + CardOrdinal) + ? MP2_MEMORY_SIZE : + MP_MEMORY_SIZE); + break; + + case DIVA_XDI_UM_CMD_STOP_ADAPTER: + ret = diva_pri_stop_adapter(a); + break; + + case DIVA_XDI_UM_CMD_START_ADAPTER: + ret = diva_pri_start_adapter(&a->xdi_adapter, + cmd->command_data.start. + offset, + cmd->command_data.start. + features); + break; + + case DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES: + a->xdi_adapter.features = + cmd->command_data.features.features; + a->xdi_adapter.a.protocol_capabilities = + a->xdi_adapter.features; + DBG_TRC(("Set raw protocol features (%08x)", + a->xdi_adapter.features)) + ret = 0; + break; + + case DIVA_XDI_UM_CMD_GET_CARD_STATE: + a->xdi_mbox.data_length = sizeof(dword); + a->xdi_mbox.data = + diva_os_malloc(0, a->xdi_mbox.data_length); + if (a->xdi_mbox.data) { + dword *data = (dword *) a->xdi_mbox.data; + if (!a->xdi_adapter.ram || + !a->xdi_adapter.reset || + !a->xdi_adapter.cfg) { + *data = 3; + } else if (a->xdi_adapter.trapped) { + *data = 2; + } else if (a->xdi_adapter.Initialized) { + *data = 1; + } else { + *data = 0; + } + a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY; + ret = 0; + } + break; + + case DIVA_XDI_UM_CMD_READ_XLOG_ENTRY: + ret = diva_card_read_xlog(a); + break; + + case DIVA_XDI_UM_CMD_READ_SDRAM: + if (a->xdi_adapter.Address) { + if ( + (a->xdi_mbox.data_length = + cmd->command_data.read_sdram.length)) { + if ( + (a->xdi_mbox.data_length + + cmd->command_data.read_sdram.offset) < + a->xdi_adapter.MemorySize) { + a->xdi_mbox.data = + diva_os_malloc(0, + a->xdi_mbox. + data_length); + if (a->xdi_mbox.data) { + byte __iomem *p = DIVA_OS_MEM_ATTACH_ADDRESS(&a->xdi_adapter); + byte __iomem *src = p; + byte *dst = a->xdi_mbox.data; + dword len = a->xdi_mbox.data_length; + + src += cmd->command_data.read_sdram.offset; + + while (len--) { + *dst++ = READ_BYTE(src++); + } + a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY; + DIVA_OS_MEM_DETACH_ADDRESS(&a->xdi_adapter, p); + ret = 0; + } + } + } + } + break; + + default: + DBG_ERR(("A: A(%d) invalid cmd=%d", a->controller, + cmd->command)) + } + + return (ret); +} + +/* +** Get Serial Number +*/ +static int pri_get_serial_number(diva_os_xdi_adapter_t * a) +{ + byte data[64]; + int i; + dword len = sizeof(data); + volatile byte __iomem *config; + volatile byte __iomem *flash; + byte c; + +/* + * First set some GT6401x config registers before accessing the BOOT-ROM + */ + config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter); + c = READ_BYTE(&config[0xc3c]); + if (!(c & 0x08)) { + WRITE_BYTE(&config[0xc3c], c); /* Base Address enable register */ + } + WRITE_BYTE(&config[LOW_BOOTCS_DREG], 0x00); + WRITE_BYTE(&config[HI_BOOTCS_DREG], 0xFF); + DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config); +/* + * Read only the last 64 bytes of manufacturing data + */ + memset(data, '\0', len); + flash = DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter); + for (i = 0; i < len; i++) { + data[i] = READ_BYTE(&flash[0x8000 - len + i]); + } + DIVA_OS_MEM_DETACH_PROM(&a->xdi_adapter, flash); + + config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter); + WRITE_BYTE(&config[LOW_BOOTCS_DREG], 0xFC); /* Disable FLASH EPROM access */ + WRITE_BYTE(&config[HI_BOOTCS_DREG], 0xFF); + DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config); + + if (memcmp(&data[48], "DIVAserverPR", 12)) { +#if !defined(DIVA_PRI_NO_PCI_BIOS_WORKAROUND) /* { */ + word cmd = 0, cmd_org; + void *addr; + dword addr1, addr3, addr4; + byte Bus, Slot; + void *hdev; + addr4 = a->resources.pci.bar[4]; + addr3 = a->resources.pci.bar[3]; /* flash */ + addr1 = a->resources.pci.bar[1]; /* unused */ + + DBG_ERR(("A: apply Compaq BIOS workaround")) + DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", + data[0], data[1], data[2], data[3], + data[4], data[5], data[6], data[7])) + + Bus = a->resources.pci.bus; + Slot = a->resources.pci.func; + hdev = a->resources.pci.hdev; + PCIread(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev); + PCIwrite(Bus, Slot, 0x04, &cmd, sizeof(cmd), hdev); + + PCIwrite(Bus, Slot, 0x14, &addr4, sizeof(addr4), hdev); + PCIwrite(Bus, Slot, 0x20, &addr1, sizeof(addr1), hdev); + + PCIwrite(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev); + + addr = a->resources.pci.addr[1]; + a->resources.pci.addr[1] = a->resources.pci.addr[4]; + a->resources.pci.addr[4] = addr; + + addr1 = a->resources.pci.bar[1]; + a->resources.pci.bar[1] = a->resources.pci.bar[4]; + a->resources.pci.bar[4] = addr1; + + /* + Try to read Flash again + */ + len = sizeof(data); + + config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter); + if (!(config[0xc3c] & 0x08)) { + config[0xc3c] |= 0x08; /* Base Address enable register */ + } + config[LOW_BOOTCS_DREG] = 0x00; + config[HI_BOOTCS_DREG] = 0xFF; + DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config); + + memset(data, '\0', len); + flash = DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter); + for (i = 0; i < len; i++) { + data[i] = flash[0x8000 - len + i]; + } + DIVA_OS_MEM_ATTACH_PROM(&a->xdi_adapter, flash); + config = DIVA_OS_MEM_ATTACH_CONFIG(&a->xdi_adapter); + config[LOW_BOOTCS_DREG] = 0xFC; + config[HI_BOOTCS_DREG] = 0xFF; + DIVA_OS_MEM_DETACH_CONFIG(&a->xdi_adapter, config); + + if (memcmp(&data[48], "DIVAserverPR", 12)) { + DBG_ERR(("A: failed to read serial number")) + DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", + data[0], data[1], data[2], data[3], + data[4], data[5], data[6], data[7])) + return (-1); + } +#else /* } { */ + DBG_ERR(("A: failed to read DIVA signature word")) + DBG_LOG(("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", + data[0], data[1], data[2], data[3], + data[4], data[5], data[6], data[7])) + DBG_LOG(("%02x:%02x:%02x:%02x", data[47], data[46], + data[45], data[44])) +#endif /* } */ + } + + a->xdi_adapter.serialNo = + (data[47] << 24) | (data[46] << 16) | (data[45] << 8) | + data[44]; + if (!a->xdi_adapter.serialNo + || (a->xdi_adapter.serialNo == 0xffffffff)) { + a->xdi_adapter.serialNo = 0; + DBG_ERR(("A: failed to read serial number")) + return (-1); + } + + DBG_LOG(("Serial No. : %ld", a->xdi_adapter.serialNo)) + DBG_TRC(("Board Revision : %d.%02d", (int) data[41], + (int) data[40])) + DBG_TRC(("PLD revision : %d.%02d", (int) data[33], + (int) data[32])) + DBG_TRC(("Boot loader version : %d.%02d", (int) data[37], + (int) data[36])) + + DBG_TRC(("Manufacturing Date : %d/%02d/%02d (yyyy/mm/dd)", + (int) ((data[28] > 90) ? 1900 : 2000) + + (int) data[28], (int) data[29], (int) data[30])) + + return (0); +} + +void diva_os_prepare_pri2_functions(PISDN_ADAPTER IoAdapter) +{ +} + +void diva_os_prepare_pri_functions(PISDN_ADAPTER IoAdapter) +{ +} + +/* +** Checks presence of DSP on board +*/ +static int +dsp_check_presence(volatile byte __iomem * addr, volatile byte __iomem * data, int dsp) +{ + word pattern; + + WRITE_WORD(addr, 0x4000); + WRITE_WORD(data, DSP_SIGNATURE_PROBE_WORD); + + WRITE_WORD(addr, 0x4000); + pattern = READ_WORD(data); + + if (pattern != DSP_SIGNATURE_PROBE_WORD) { + DBG_TRC(("W: DSP[%d] %04x(is) != %04x(should)", + dsp, pattern, DSP_SIGNATURE_PROBE_WORD)) + return (-1); + } + + WRITE_WORD(addr, 0x4000); + WRITE_WORD(data, ~DSP_SIGNATURE_PROBE_WORD); + + WRITE_WORD(addr, 0x4000); + pattern = READ_WORD(data); + + if (pattern != (word) ~ DSP_SIGNATURE_PROBE_WORD) { + DBG_ERR(("A: DSP[%d] %04x(is) != %04x(should)", + dsp, pattern, (word) ~ DSP_SIGNATURE_PROBE_WORD)) + return (-2); + } + + DBG_TRC(("DSP[%d] present", dsp)) + + return (0); +} + + +/* +** Check if DSP's are present and operating +** Information about detected DSP's is returned as bit mask +** Bit 0 - DSP1 +** ... +** ... +** ... +** Bit 29 - DSP30 +*/ +static dword diva_pri_detect_dsps(diva_os_xdi_adapter_t * a) +{ + byte __iomem *base; + byte __iomem *p; + dword ret = 0; + dword row_offset[7] = { + 0x00000000, + 0x00000800, /* 1 - ROW 1 */ + 0x00000840, /* 2 - ROW 2 */ + 0x00001000, /* 3 - ROW 3 */ + 0x00001040, /* 4 - ROW 4 */ + 0x00000000 /* 5 - ROW 0 */ + }; + + byte __iomem *dsp_addr_port; + byte __iomem *dsp_data_port; + byte row_state; + int dsp_row = 0, dsp_index, dsp_num; + + if (!a->xdi_adapter.Control || !a->xdi_adapter.reset) { + return (0); + } + + p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter); + WRITE_BYTE(p, _MP_RISC_RESET | _MP_DSP_RESET); + DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p); + diva_os_wait(5); + + base = DIVA_OS_MEM_ATTACH_CONTROL(&a->xdi_adapter); + + for (dsp_num = 0; dsp_num < 30; dsp_num++) { + dsp_row = dsp_num / 7 + 1; + dsp_index = dsp_num % 7; + + dsp_data_port = base; + dsp_addr_port = base; + + dsp_data_port += row_offset[dsp_row]; + dsp_addr_port += row_offset[dsp_row]; + + dsp_data_port += (dsp_index * 8); + dsp_addr_port += (dsp_index * 8) + 0x80; + + if (!dsp_check_presence + (dsp_addr_port, dsp_data_port, dsp_num + 1)) { + ret |= (1 << dsp_num); + } + } + DIVA_OS_MEM_DETACH_CONTROL(&a->xdi_adapter, base); + + p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter); + WRITE_BYTE(p, _MP_RISC_RESET | _MP_LED1 | _MP_LED2); + DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p); + diva_os_wait(5); + + /* + Verify modules + */ + for (dsp_row = 0; dsp_row < 4; dsp_row++) { + row_state = ((ret >> (dsp_row * 7)) & 0x7F); + if (row_state && (row_state != 0x7F)) { + for (dsp_index = 0; dsp_index < 7; dsp_index++) { + if (!(row_state & (1 << dsp_index))) { + DBG_ERR(("A: MODULE[%d]-DSP[%d] failed", + dsp_row + 1, + dsp_index + 1)) + } + } + } + } + + if (!(ret & 0x10000000)) { + DBG_ERR(("A: ON BOARD-DSP[1] failed")) + } + if (!(ret & 0x20000000)) { + DBG_ERR(("A: ON BOARD-DSP[2] failed")) + } + + /* + Print module population now + */ + DBG_LOG(("+-----------------------+")) + DBG_LOG(("| DSP MODULE POPULATION |")) + DBG_LOG(("+-----------------------+")) + DBG_LOG(("| 1 | 2 | 3 | 4 |")) + DBG_LOG(("+-----------------------+")) + DBG_LOG(("| %s | %s | %s | %s |", + ((ret >> (0 * 7)) & 0x7F) ? "Y" : "N", + ((ret >> (1 * 7)) & 0x7F) ? "Y" : "N", + ((ret >> (2 * 7)) & 0x7F) ? "Y" : "N", + ((ret >> (3 * 7)) & 0x7F) ? "Y" : "N")) + DBG_LOG(("+-----------------------+")) + + DBG_LOG(("DSP's(present-absent):%08x-%08x", ret, + ~ret & 0x3fffffff)) + + return (ret); +} |