summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/hisax/sedlbauer_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hisax/sedlbauer_cs.c')
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c60
1 files changed, 5 insertions, 55 deletions
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 71b3ddef03b..1f4feaab21a 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -87,32 +87,8 @@ static void sedlbauer_release(struct pcmcia_device *link);
static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
-/*
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally shouldn't be allocated dynamically.
-
- In this case, we also provide a flag to indicate if a device is
- "stopped" due to a power management event, or card ejection. The
- device IO routines can use a flag like this to throttle IO to a
- card that is not ready to accept it.
-*/
-
typedef struct local_info_t {
struct pcmcia_device *p_dev;
- dev_node_t node;
int stop;
int cardnr;
} local_info_t;
@@ -143,10 +119,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = NULL;
-
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -227,9 +199,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -285,7 +255,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
- local_info_t *dev = link->priv;
win_req_t *req;
int ret;
IsdnCard_t icard;
@@ -313,17 +282,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
goto failed;
/*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
-
- /*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
@@ -332,21 +290,13 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /*
- At this point, the dev_node_t structure(s) need to be
- initialized and arranged in a linked list at link->dev.
- */
- sprintf(dev->node.dev_name, "sedlbauer");
- dev->node.major = dev->node.minor = 0;
- link->dev_node = &dev->node;
-
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x:",
- dev->node.dev_name, link->conf.ConfigIndex);
+ dev_info(&link->dev, "index 0x%02x:",
+ link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@@ -358,7 +308,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
req->Base+req->Size-1);
printk("\n");
- icard.para[0] = link->irq.AssignedIRQ;
+ icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;