diff options
Diffstat (limited to 'drivers/isdn/hisax/st5481.h')
-rw-r--r-- | drivers/isdn/hisax/st5481.h | 98 |
1 files changed, 49 insertions, 49 deletions
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h index b9054cb7a0d..8cd2d827742 100644 --- a/drivers/isdn/hisax/st5481.h +++ b/drivers/isdn/hisax/st5481.h @@ -4,7 +4,7 @@ * Author Frode Isaksen * Copyright 2001 by Frode Isaksen <fisaksen@bewan.com> * 2001 by Kai Germaschewski <kai.germaschewski@gmx.de> - * + * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * @@ -31,7 +31,7 @@ #define EP_B2_IN 0x05U /* B2 channel in */ #define EP_D_OUT 0x06U /* D channel out */ #define EP_D_IN 0x07U /* D channel in */ - + // Number of isochronous packets. With 20 packets we get // 50 interrupts/sec for each endpoint. @@ -51,7 +51,7 @@ #define B_FLOW_ADJUST 2 // Registers that are written using vendor specific device request -// on endpoint 0. +// on endpoint 0. #define LBA 0x02 /* S loopback */ #define SET_DEFAULT 0x06 /* Soft reset */ @@ -84,7 +84,7 @@ #define FFMSK_B2 0x50 /* B2 fifo interrupt MASK register */ #define GPIO_DIR 0x52 /* GPIO pins direction registers */ #define GPIO_OUT 0x53 /* GPIO pins output register */ -#define GPIO_IN 0x54 /* GPIO pins input register */ +#define GPIO_IN 0x54 /* GPIO pins input register */ #define TXCI 0x56 /* CI command to be transmitted */ @@ -124,8 +124,8 @@ #define IN_COUNTER_ZEROED 0x02 /* In down-counter reached 0 */ #define OUT_COUNTER_ZEROED 0x01 /* Out down-counter reached 0 */ -#define ANY_REC_INT (IN_OVERRUN+IN_UP+IN_DOWN+IN_COUNTER_ZEROED) -#define ANY_XMIT_INT (OUT_UNDERRUN+OUT_UP+OUT_DOWN+OUT_COUNTER_ZEROED) +#define ANY_REC_INT (IN_OVERRUN + IN_UP + IN_DOWN + IN_COUNTER_ZEROED) +#define ANY_XMIT_INT (OUT_UNDERRUN + OUT_UP + OUT_DOWN + OUT_COUNTER_ZEROED) // Level 1 commands that are sent using the TXCI device request @@ -158,7 +158,7 @@ enum { ST_DOUT_NORMAL, ST_DOUT_WAIT_FOR_UNDERRUN, - ST_DOUT_WAIT_FOR_NOT_BUSY, + ST_DOUT_WAIT_FOR_NOT_BUSY, ST_DOUT_WAIT_FOR_STOP, ST_DOUT_WAIT_FOR_RESET, }; @@ -188,9 +188,9 @@ enum { ST_L1_F8, }; -#define L1_STATE_COUNT (ST_L1_F8+1) +#define L1_STATE_COUNT (ST_L1_F8 + 1) -// The first 16 entries match the Level 1 indications that +// The first 16 entries match the Level 1 indications that // are found at offset 4 (CCIST) in the interrupt packet enum { @@ -217,14 +217,14 @@ enum { #define L1_EVENT_COUNT (EV_TIMER3 + 1) -#define ERR(format, arg...) \ -printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) +#define ERR(format, arg...) \ + printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) -#define WARNING(format, arg...) \ -printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) +#define WARNING(format, arg...) \ + printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) -#define INFO(format, arg...) \ -printk(KERN_INFO "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) +#define INFO(format, arg...) \ + printk(KERN_INFO "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) #include <linux/isdn/hdlc.h> #include "fsm.h" @@ -237,7 +237,7 @@ printk(KERN_INFO "%s:%s: " format "\n" , __FILE__, __func__ , ## arg) /* Generic FIFO structure */ struct fifo { - u_char r,w,count,size; + u_char r, w, count, size; spinlock_t lock; }; @@ -269,7 +269,7 @@ static inline int fifo_add(struct fifo *fifo) index = -1; } else { // Return index where to get the next data to add to the FIFO - index = fifo->w++ & (fifo->size-1); + index = fifo->w++ & (fifo->size - 1); fifo->count++; } spin_unlock_irqrestore(&fifo->lock, flags); @@ -294,7 +294,7 @@ static inline int fifo_remove(struct fifo *fifo) index = -1; } else { // Return index where to get the next data from the FIFO - index = fifo->r++ & (fifo->size-1); + index = fifo->r++ & (fifo->size - 1); fifo->count--; } spin_unlock_irqrestore(&fifo->lock, flags); @@ -311,14 +311,14 @@ typedef struct ctrl_msg { struct usb_ctrlrequest dr; ctrl_complete_t complete; void *context; -} ctrl_msg; +} ctrl_msg; /* FIFO of ctrl messages waiting to be sent */ #define MAX_EP0_MSG 16 struct ctrl_msg_fifo { struct fifo f; struct ctrl_msg data[MAX_EP0_MSG]; -}; +}; #define MAX_DFRAME_LEN_L1 300 #define HSCX_BUFMAX 4096 @@ -330,7 +330,7 @@ struct st5481_ctrl { }; struct st5481_intr { - // struct evt_fifo evt_fifo; + // struct evt_fifo evt_fifo; struct urb *urb; }; @@ -407,21 +407,21 @@ struct st5481_adapter { * Submit an URB with error reporting. This is a macro so * the __func__ returns the caller function name. */ -#define SUBMIT_URB(urb, mem_flags) \ -({ \ - int status; \ - if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \ - WARNING("usb_submit_urb failed,status=%d", status); \ - } \ - status; \ -}) +#define SUBMIT_URB(urb, mem_flags) \ + ({ \ + int status; \ + if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \ + WARNING("usb_submit_urb failed,status=%d", status); \ + } \ + status; \ + }) /* * USB double buffering, return the URB index (0 or 1). */ static inline int get_buf_nr(struct urb *urbs[], struct urb *urb) { - return (urbs[0]==urb ? 0 : 1); + return (urbs[0] == urb ? 0 : 1); } /* ---------------------------------------------------------------------- */ @@ -442,17 +442,17 @@ void st5481_d_exit(void); /* USB */ void st5481_ph_command(struct st5481_adapter *adapter, unsigned int command); -int st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev, +int st5481_setup_isocpipes(struct urb *urb[2], struct usb_device *dev, unsigned int pipe, int num_packets, int packet_size, int buf_size, usb_complete_t complete, void *context); -void st5481_release_isocpipes(struct urb* urb[2]); +void st5481_release_isocpipes(struct urb *urb[2]); void st5481_usb_pipe_reset(struct st5481_adapter *adapter, - u_char pipe, ctrl_complete_t complete, void *context); + u_char pipe, ctrl_complete_t complete, void *context); void st5481_usb_device_ctrl_msg(struct st5481_adapter *adapter, - u8 request, u16 value, - ctrl_complete_t complete, void *context); + u8 request, u16 value, + ctrl_complete_t complete, void *context); int st5481_setup_usb(struct st5481_adapter *adapter); void st5481_release_usb(struct st5481_adapter *adapter); void st5481_start(struct st5481_adapter *adapter); @@ -468,18 +468,18 @@ extern int st5481_debug; #ifdef CONFIG_HISAX_DEBUG -#define DBG_ISO_PACKET(level,urb) \ - if (level & __debug_variable) dump_iso_packet(__func__,urb) +#define DBG_ISO_PACKET(level, urb) \ + if (level & __debug_variable) dump_iso_packet(__func__, urb) static void __attribute__((unused)) dump_iso_packet(const char *name, struct urb *urb) { - int i,j; - int len,ofs; + int i, j; + int len, ofs; u_char *data; printk(KERN_DEBUG "%s: packets=%d,errors=%d\n", - name,urb->number_of_packets,urb->error_count); + name, urb->number_of_packets, urb->error_count); for (i = 0; i < urb->number_of_packets; ++i) { if (urb->pipe & USB_DIR_IN) { len = urb->iso_frame_desc[i].actual_length; @@ -487,11 +487,11 @@ dump_iso_packet(const char *name, struct urb *urb) len = urb->iso_frame_desc[i].length; } ofs = urb->iso_frame_desc[i].offset; - printk(KERN_DEBUG "len=%.2d,ofs=%.3d ",len,ofs); + printk(KERN_DEBUG "len=%.2d,ofs=%.3d ", len, ofs); if (len) { - data = urb->transfer_buffer+ofs; - for (j=0; j < len; j++) { - printk ("%.2x", data[j]); + data = urb->transfer_buffer + ofs; + for (j = 0; j < len; j++) { + printk("%.2x", data[j]); } } printk("\n"); @@ -513,17 +513,17 @@ static inline const char *ST5481_CMD_string(int evt) case ST5481_CMD_ARL: return "ARL"; case ST5481_CMD_PDN: return "PDN"; }; - - sprintf(s,"0x%x",evt); + + sprintf(s, "0x%x", evt); return s; -} +} #else -#define DBG_ISO_PACKET(level,urb) do {} while (0) +#define DBG_ISO_PACKET(level, urb) do {} while (0) #endif -#endif +#endif |