diff options
Diffstat (limited to 'drivers/isdn/sc/hardware.h')
| -rw-r--r-- | drivers/isdn/sc/hardware.h | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h new file mode 100644 index 00000000000..9e6d5302bf8 --- /dev/null +++ b/drivers/isdn/sc/hardware.h @@ -0,0 +1,110 @@ +/* + * Hardware specific macros, defines and structures + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#ifndef HARDWARE_H +#define HARDWARE_H + +#include <asm/param.h> /* For HZ */ + +/* + * General hardware parameters common to all ISA adapters + */ + +#define MAX_CARDS 4 /* The maximum number of cards to + control or probe for. */ + +#define SIGNATURE 0x87654321 /* Board reset signature */ +#define SIG_OFFSET 0x1004 /* Where to find signature in shared RAM */ +#define TRACE_OFFSET 0x1008 /* Trace enable word offset in shared RAM */ +#define BUFFER_OFFSET 0x1800 /* Beginning of buffers */ + +/* I/O Port parameters */ +#define IOBASE_MIN 0x180 /* Lowest I/O port address */ +#define IOBASE_MAX 0x3C0 /* Highest I/O port address */ +#define IOBASE_OFFSET 0x20 /* Inter-board I/O port gap used during + probing */ +#define FIFORD_OFFSET 0x0 +#define FIFOWR_OFFSET 0x400 +#define FIFOSTAT_OFFSET 0x1000 +#define RESET_OFFSET 0x2800 +#define PG0_OFFSET 0x3000 /* Offset from I/O Base for Page 0 register */ +#define PG1_OFFSET 0x3400 /* Offset from I/O Base for Page 1 register */ +#define PG2_OFFSET 0x3800 /* Offset from I/O Base for Page 2 register */ +#define PG3_OFFSET 0x3C00 /* Offset from I/O Base for Page 3 register */ + +#define FIFO_READ 0 /* FIFO Read register */ +#define FIFO_WRITE 1 /* FIFO Write rgister */ +#define LO_ADDR_PTR 2 /* Extended RAM Low Addr Pointer */ +#define HI_ADDR_PTR 3 /* Extended RAM High Addr Pointer */ +#define NOT_USED_1 4 +#define FIFO_STATUS 5 /* FIFO Status Register */ +#define NOT_USED_2 6 +#define MEM_OFFSET 7 +#define SFT_RESET 10 /* Reset Register */ +#define EXP_BASE 11 /* Shared RAM Base address */ +#define EXP_PAGE0 12 /* Shared RAM Page0 register */ +#define EXP_PAGE1 13 /* Shared RAM Page1 register */ +#define EXP_PAGE2 14 /* Shared RAM Page2 register */ +#define EXP_PAGE3 15 /* Shared RAM Page3 register */ +#define IRQ_SELECT 16 /* IRQ selection register */ +#define MAX_IO_REGS 17 /* Total number of I/O ports */ + +/* FIFO register values */ +#define RF_HAS_DATA 0x01 /* fifo has data */ +#define RF_QUART_FULL 0x02 /* fifo quarter full */ +#define RF_HALF_FULL 0x04 /* fifo half full */ +#define RF_NOT_FULL 0x08 /* fifo not full */ +#define WF_HAS_DATA 0x10 /* fifo has data */ +#define WF_QUART_FULL 0x20 /* fifo quarter full */ +#define WF_HALF_FULL 0x40 /* fifo half full */ +#define WF_NOT_FULL 0x80 /* fifo not full */ + +/* Shared RAM parameters */ +#define SRAM_MIN 0xC0000 /* Lowest host shared RAM address */ +#define SRAM_MAX 0xEFFFF /* Highest host shared RAM address */ +#define SRAM_PAGESIZE 0x4000 /* Size of one RAM page (16K) */ + +/* Shared RAM buffer parameters */ +#define BUFFER_SIZE 0x800 /* The size of a buffer in bytes */ +#define BUFFER_BASE BUFFER_OFFSET /* Offset from start of shared RAM + where buffer start */ +#define BUFFERS_MAX 16 /* Maximum number of send/receive + buffers per channel */ +#define HDLC_PROTO 0x01 /* Frame Format for Layer 2 */ + +#define BRI_BOARD 0 +#define POTS_BOARD 1 +#define PRI_BOARD 2 + +/* + * Specific hardware parameters for the DataCommute/BRI + */ +#define BRI_CHANNELS 2 /* Number of B channels */ +#define BRI_BASEPG_VAL 0x98 +#define BRI_MAGIC 0x60000 /* Magic Number */ +#define BRI_MEMSIZE 0x10000 /* Ammount of RAM (64K) */ +#define BRI_PARTNO "72-029" +#define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; +/* + * Specific hardware parameters for the DataCommute/PRI + */ +#define PRI_CHANNELS 23 /* Number of B channels */ +#define PRI_BASEPG_VAL 0x88 +#define PRI_MAGIC 0x20000 /* Magic Number */ +#define PRI_MEMSIZE 0x100000 /* Amount of RAM (1M) */ +#define PRI_PARTNO "72-030" +#define PRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; + +/* + * Some handy macros + */ + +/* Determine if a channel number is valid for the adapter */ +#define IS_VALID_CHANNEL(y,x) ((x>0) && (x <= sc_adapter[y]->channels)) + +#endif |