diff options
Diffstat (limited to 'drivers/isdn/sc/timer.c')
| -rw-r--r-- | drivers/isdn/sc/timer.c | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/drivers/isdn/sc/timer.c b/drivers/isdn/sc/timer.c new file mode 100644 index 00000000000..710d0f47ca3 --- /dev/null +++ b/drivers/isdn/sc/timer.c @@ -0,0 +1,147 @@ +/* $Id: timer.c,v 1.3.6.1 2001/09/23 22:24:59 kai Exp $ + * + * Copyright (C) 1996 SpellCaster Telecommunications Inc. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * For more information, please contact gpl-info@spellcast.com or write: + * + * SpellCaster Telecommunications Inc. + * 5621 Finch Avenue East, Unit #3 + * Scarborough, Ontario Canada + * M1B 2T9 + * +1 (416) 297-8565 + * +1 (416) 297-6433 Facsimile + */ + +#include "includes.h" +#include "hardware.h" +#include "message.h" +#include "card.h" + +extern board *sc_adapter[]; + +extern void flushreadfifo(int); +extern int startproc(int); +extern int indicate_status(int, int, unsigned long, char *); +extern int sendmessage(int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int *); + + +/* + * Write the proper values into the I/O ports following a reset + */ +void setup_ports(int card) +{ + + outb((sc_adapter[card]->rambase >> 12), sc_adapter[card]->ioport[EXP_BASE]); + + /* And the IRQ */ + outb((sc_adapter[card]->interrupt | 0x80), + sc_adapter[card]->ioport[IRQ_SELECT]); +} + +/* + * Timed function to check the status of a previous reset + * Must be very fast as this function runs in the context of + * an interrupt handler. + * + * Setup the ioports for the board that were cleared by the reset. + * Then, check to see if the signate has been set. Next, set the + * signature to a known value and issue a startproc if needed. + */ +void check_reset(unsigned long data) +{ + unsigned long flags; + unsigned long sig; + int card = (unsigned int) data; + + pr_debug("%s: check_timer timer called\n", + sc_adapter[card]->devicename); + + /* Setup the io ports */ + setup_ports(card); + + spin_lock_irqsave(&sc_adapter[card]->lock, flags); + outb(sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport], + (sc_adapter[card]->shmem_magic>>14) | 0x80); + sig = (unsigned long) *((unsigned long *)(sc_adapter[card]->rambase + SIG_OFFSET)); + + /* check the signature */ + if(sig == SIGNATURE) { + flushreadfifo(card); + spin_unlock_irqrestore(&sc_adapter[card]->lock, flags); + /* See if we need to do a startproc */ + if (sc_adapter[card]->StartOnReset) + startproc(card); + } else { + pr_debug("%s: No signature yet, waiting another %d jiffies.\n", + sc_adapter[card]->devicename, CHECKRESET_TIME); + mod_timer(&sc_adapter[card]->reset_timer, jiffies+CHECKRESET_TIME); + spin_unlock_irqrestore(&sc_adapter[card]->lock, flags); + } +} + +/* + * Timed function to check the status of a previous reset + * Must be very fast as this function runs in the context of + * an interrupt handler. + * + * Send check sc_adapter->phystat to see if the channels are up + * If they are, tell ISDN4Linux that the board is up. If not, + * tell IADN4Linux that it is up. Always reset the timer to + * fire again (endless loop). + */ +void check_phystat(unsigned long data) +{ + unsigned long flags; + int card = (unsigned int) data; + + pr_debug("%s: Checking status...\n", sc_adapter[card]->devicename); + /* + * check the results of the last PhyStat and change only if + * has changed drastically + */ + if (sc_adapter[card]->nphystat && !sc_adapter[card]->phystat) { /* All is well */ + pr_debug("PhyStat transition to RUN\n"); + pr_info("%s: Switch contacted, transmitter enabled\n", + sc_adapter[card]->devicename); + indicate_status(card, ISDN_STAT_RUN, 0, NULL); + } + else if (!sc_adapter[card]->nphystat && sc_adapter[card]->phystat) { /* All is not well */ + pr_debug("PhyStat transition to STOP\n"); + pr_info("%s: Switch connection lost, transmitter disabled\n", + sc_adapter[card]->devicename); + + indicate_status(card, ISDN_STAT_STOP, 0, NULL); + } + + sc_adapter[card]->phystat = sc_adapter[card]->nphystat; + + /* Reinitialize the timer */ + spin_lock_irqsave(&sc_adapter[card]->lock, flags); + mod_timer(&sc_adapter[card]->stat_timer, jiffies+CHECKSTAT_TIME); + spin_unlock_irqrestore(&sc_adapter[card]->lock, flags); + + /* Send a new cePhyStatus message */ + sendmessage(card, CEPID,ceReqTypePhy,ceReqClass2, + ceReqPhyStatus,0,0,NULL); +} + +/* + * When in trace mode, this callback is used to swap the working shared + * RAM page to the trace page(s) and process all received messages. It + * must be called often enough to get all of the messages out of RAM before + * it loops around. + * Trace messages are \n terminated strings. + * We output the messages in 64 byte chunks through readstat. Each chunk + * is scanned for a \n followed by a time stamp. If the timerstamp is older + * than the current time, scanning stops and the page and offset are recorded + * as the starting point the next time the trace timer is called. The final + * step is to restore the working page and reset the timer. + */ +void trace_timer(unsigned long data) +{ + /* not implemented */ +} |