diff options
Diffstat (limited to 'drivers/isdn')
| -rw-r--r-- | drivers/isdn/gigaset/bas-gigaset.c | 166 |
1 files changed, 164 insertions, 2 deletions
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index d60a6510e92..1c401b3f88e 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -73,6 +73,14 @@ static int gigaset_probe(struct usb_interface *interface, /* Function will be called if the device is unplugged */ static void gigaset_disconnect(struct usb_interface *interface); +/* functions called before/after suspend */ +static int gigaset_suspend(struct usb_interface *intf, pm_message_t message); +static int gigaset_resume(struct usb_interface *intf); + +/* functions called before/after device reset */ +static int gigaset_pre_reset(struct usb_interface *intf); +static int gigaset_post_reset(struct usb_interface *intf); + static int atread_submit(struct cardstate *, int); static void stopurbs(struct bas_bc_state *); static int req_submit(struct bc_state *, int, int, int); @@ -107,6 +115,7 @@ struct bas_cardstate { spinlock_t lock; /* locks all following */ atomic_t basstate; /* bitmap (BS_*) */ int pending; /* uncompleted base request */ + wait_queue_head_t waitqueue; int rcvbuf_size; /* size of AT receive buffer */ /* 0: no receive in progress */ int retry_cmd_in; /* receive req retry count */ @@ -121,6 +130,7 @@ struct bas_cardstate { #define BS_ATTIMER 0x020 /* waiting for HD_READY_SEND_ATDATA */ #define BS_ATRDPEND 0x040 /* urb_cmd_in in use */ #define BS_ATWRPEND 0x080 /* urb_cmd_out in use */ +#define BS_SUSPEND 0x100 /* USB port suspended */ static struct gigaset_driver *driver = NULL; @@ -132,6 +142,11 @@ static struct usb_driver gigaset_usb_driver = { .probe = gigaset_probe, .disconnect = gigaset_disconnect, .id_table = gigaset_table, + .suspend = gigaset_suspend, + .resume = gigaset_resume, + .reset_resume = gigaset_post_reset, + .pre_reset = gigaset_pre_reset, + .post_reset = gigaset_post_reset, }; /* get message text for usb_submit_urb return code @@ -465,6 +480,7 @@ static void read_ctrl_callback(struct urb *urb) int rc; update_basstate(ucs, 0, BS_ATRDPEND); + wake_up(&ucs->waitqueue); if (!ucs->rcvbuf_size) { dev_warn(cs->dev, "%s: no receive in progress\n", __func__); @@ -551,17 +567,28 @@ static void read_ctrl_callback(struct urb *urb) static int atread_submit(struct cardstate *cs, int timeout) { struct bas_cardstate *ucs = cs->hw.bas; + int basstate; int ret; gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)", ucs->rcvbuf_size); - if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) { + basstate = update_basstate(ucs, BS_ATRDPEND, 0); + if (basstate & BS_ATRDPEND) { dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: URB busy\n"); return -EBUSY; } + if (basstate & BS_SUSPEND) { + dev_notice(cs->dev, + "HD_READ_ATMESSAGE not submitted, " + "suspend in progress\n"); + update_basstate(ucs, 0, BS_ATRDPEND); + /* treat like disconnect */ + return -ENODEV; + } + ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ; ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE; ucs->dr_cmd_in.wValue = 0; @@ -747,6 +774,7 @@ static void read_int_callback(struct urb *urb) } check_pending(ucs); + wake_up(&ucs->waitqueue); resubmit: rc = usb_submit_urb(urb, GFP_ATOMIC); @@ -1416,6 +1444,8 @@ static void req_timeout(unsigned long data) dev_warn(bcs->cs->dev, "request 0x%02x timed out, clearing\n", pending); } + + wake_up(&ucs->waitqueue); } /* write_ctrl_callback @@ -1456,7 +1486,9 @@ static void write_ctrl_callback(struct urb *urb) break; default: /* any failure */ - if (++ucs->retry_ctrl > BAS_RETRY) { + /* don't retry if suspend requested */ + if (++ucs->retry_ctrl > BAS_RETRY || + (atomic_read(&ucs->basstate) & BS_SUSPEND)) { dev_err(&ucs->interface->dev, "control request 0x%02x failed: %s\n", ucs->dr_ctrl.bRequest, @@ -1485,6 +1517,7 @@ static void write_ctrl_callback(struct urb *urb) del_timer(&ucs->timer_ctrl); ucs->pending = 0; spin_unlock_irqrestore(&ucs->lock, flags); + wake_up(&ucs->waitqueue); } /* req_submit @@ -1570,6 +1603,14 @@ static int gigaset_init_bchannel(struct bc_state *bcs) return -ENODEV; } + if (atomic_read(&cs->hw.bas->basstate) & BS_SUSPEND) { + dev_notice(cs->dev, + "not starting isochronous I/O, " + "suspend in progress\n"); + spin_unlock_irqrestore(&cs->lock, flags); + return -EHOSTUNREACH; + } + if ((ret = starturbs(bcs)) < 0) { dev_err(cs->dev, "could not start isochronous I/O for channel B%d: %s\n", @@ -1682,6 +1723,7 @@ static void write_command_callback(struct urb *urb) unsigned long flags; update_basstate(ucs, 0, BS_ATWRPEND); + wake_up(&ucs->waitqueue); /* check status */ switch (status) { @@ -1705,6 +1747,13 @@ static void write_command_callback(struct urb *urb) ucs->retry_cmd_out); break; } + if (atomic_read(&ucs->basstate) & BS_SUSPEND) { + dev_warn(cs->dev, + "command write: %s, " + "won't retry - suspend requested\n", + get_usb_statmsg(status)); + break; + } if (cs->cmdbuf == NULL) { dev_warn(cs->dev, "command write: %s, " @@ -1813,6 +1862,12 @@ static int start_cbsend(struct cardstate *cs) int rc; int retval = 0; + /* check if suspend requested */ + if (atomic_read(&ucs->basstate) & BS_SUSPEND) { + gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "suspending"); + return -EHOSTUNREACH; + } + /* check if AT channel is open */ if (!(atomic_read(&ucs->basstate) & BS_ATOPEN)) { gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open"); @@ -2099,6 +2154,7 @@ static int gigaset_initcshw(struct cardstate *cs) init_timer(&ucs->timer_ctrl); init_timer(&ucs->timer_atrdy); init_timer(&ucs->timer_cmd_in); + init_waitqueue_head(&ucs->waitqueue); return 1; } @@ -2311,6 +2367,112 @@ static void gigaset_disconnect(struct usb_interface *interface) gigaset_unassign(cs); } +/* gigaset_suspend + * This function is called before the USB connection is suspended. + */ +static int gigaset_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct cardstate *cs = usb_get_intfdata(intf); + struct bas_cardstate *ucs = cs->hw.bas; + int basstate; + int rc; + + /* set suspend flag; this stops AT command/response traffic */ + if (update_basstate(ucs, BS_SUSPEND, 0) & BS_SUSPEND) { + gig_dbg(DEBUG_SUSPEND, "already suspended"); + return 0; + } + + /* wait a bit for blocking conditions to go away */ + rc = wait_event_timeout(ucs->waitqueue, + !(atomic_read(&ucs->basstate) & + (BS_B1OPEN|BS_B2OPEN|BS_ATRDPEND|BS_ATWRPEND)), + BAS_TIMEOUT*HZ/10); + gig_dbg(DEBUG_SUSPEND, "wait_event_timeout() -> %d", rc); + + /* check for conditions preventing suspend */ + basstate = atomic_read(&ucs->basstate); + if (basstate & (BS_B1OPEN|BS_B2OPEN|BS_ATRDPEND|BS_ATWRPEND)) { + dev_warn(cs->dev, "cannot suspend:\n"); + if (basstate & BS_B1OPEN) + dev_warn(cs->dev, " B channel 1 open\n"); + if (basstate & BS_B2OPEN) + dev_warn(cs->dev, " B channel 2 open\n"); + if (basstate & BS_ATRDPEND) + dev_warn(cs->dev, " receiving AT reply\n"); + if (basstate & BS_ATWRPEND) + dev_warn(cs->dev, " sending AT command\n"); + update_basstate(ucs, 0, BS_SUSPEND); + return -EBUSY; + } + + /* close AT channel if open */ + if (basstate & BS_ATOPEN) { + gig_dbg(DEBUG_SUSPEND, "closing AT channel"); + rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, 0); + if (rc) { + update_basstate(ucs, 0, BS_SUSPEND); + return rc; + } + wait_event_timeout(ucs->waitqueue, !ucs->pending, + BAS_TIMEOUT*HZ/10); + /* in case of timeout, proceed anyway */ + } + + /* kill all URBs and timers that might still be pending */ + usb_kill_urb(ucs->urb_ctrl); + usb_kill_urb(ucs->urb_int_in); + del_timer_sync(&ucs->timer_ctrl); + + gig_dbg(DEBUG_SUSPEND, "suspend complete"); + return 0; +} + +/* gigaset_resume + * This function is called after the USB connection has been resumed. + */ +static int gigaset_resume(struct usb_interface *intf) +{ + struct cardstate *cs = usb_get_intfdata(intf); + struct bas_cardstate *ucs = cs->hw.bas; + int rc; + + /* resubmit interrupt URB for spontaneous messages from base */ + rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL); + if (rc) { + dev_err(cs->dev, "could not resubmit interrupt URB: %s\n", + get_usb_rcmsg(rc)); + return rc; + } + + /* clear suspend flag to reallow activity */ + update_basstate(ucs, 0, BS_SUSPEND); + + gig_dbg(DEBUG_SUSPEND, "resume complete"); + return 0; +} + +/* gigaset_pre_reset + * This function is called before the USB connection is reset. + */ +static int gigaset_pre_reset(struct usb_interface *intf) +{ + /* handle just like suspend */ + return gigaset_suspend(intf, PMSG_ON); +} + +/* gigaset_post_reset + * This function is called after the USB connection has been reset. + */ +static int gigaset_post_reset(struct usb_interface *intf) +{ + /* FIXME: send HD_DEVICE_INIT_ACK? */ + + /* resume operations */ + return gigaset_resume(intf); +} + + static const struct gigaset_ops gigops = { gigaset_write_cmd, gigaset_write_room, |