diff options
Diffstat (limited to 'drivers/isdn')
| -rw-r--r-- | drivers/isdn/gigaset/asyncdata.c | 28 | ||||
| -rw-r--r-- | drivers/isdn/gigaset/common.c | 126 | ||||
| -rw-r--r-- | drivers/isdn/gigaset/ev-layer.c | 9 | ||||
| -rw-r--r-- | drivers/isdn/gigaset/i4l.c | 17 | ||||
| -rw-r--r-- | drivers/isdn/gigaset/interface.c | 9 | ||||
| -rw-r--r-- | drivers/isdn/gigaset/isocdata.c | 21 |
6 files changed, 166 insertions, 44 deletions
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c index 234cc5d5331..44a58e6f8f6 100644 --- a/drivers/isdn/gigaset/asyncdata.c +++ b/drivers/isdn/gigaset/asyncdata.c @@ -334,7 +334,14 @@ static inline int iraw_loop(unsigned char c, unsigned char *src, int numbytes, return startbytes - numbytes; } -/* process a block of data received from the device +/** + * gigaset_m10x_input() - process a block of data received from the device + * @inbuf: received data and device descriptor structure. + * + * Called by hardware module {ser,usb}_gigaset with a block of received + * bytes. Separates the bytes received over the serial data channel into + * user data and command replies (locked/unlocked) according to the + * current state of the interface. */ void gigaset_m10x_input(struct inbuf_t *inbuf) { @@ -543,16 +550,17 @@ static struct sk_buff *iraw_encode(struct sk_buff *skb, int head, int tail) return iraw_skb; } -/* gigaset_send_skb - * called by common.c to queue an skb for sending - * and start transmission if necessary - * parameters: - * B Channel control structure - * skb +/** + * gigaset_m10x_send_skb() - queue an skb for sending + * @bcs: B channel descriptor structure. + * @skb: data to send. + * + * Called by i4l.c to encode and queue an skb for sending, and start + * transmission if necessary. + * * Return value: - * number of bytes accepted for sending - * (skb->len if ok, 0 if out of buffer space) - * or error code (< 0, eg. -EINVAL) + * number of bytes accepted for sending (skb->len) if ok, + * error code < 0 (eg. -ENOMEM) on error */ int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb) { diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index edbcaa3887f..33dcd8d72b7 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -38,6 +38,17 @@ MODULE_PARM_DESC(debug, "debug level"); #define VALID_MINOR 0x01 #define VALID_ID 0x02 +/** + * gigaset_dbg_buffer() - dump data in ASCII and hex for debugging + * @level: debugging level. + * @msg: message prefix. + * @len: number of bytes to dump. + * @buf: data to dump. + * + * If the current debugging level includes one of the bits set in @level, + * @len bytes starting at @buf are logged to dmesg at KERN_DEBUG prio, + * prefixed by the text @msg. + */ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg, size_t len, const unsigned char *buf) { @@ -280,6 +291,20 @@ static void clear_events(struct cardstate *cs) spin_unlock_irqrestore(&cs->ev_lock, flags); } +/** + * gigaset_add_event() - add event to device event queue + * @cs: device descriptor structure. + * @at_state: connection state structure. + * @type: event type. + * @ptr: pointer parameter for event. + * @parameter: integer parameter for event. + * @arg: pointer parameter for event. + * + * Allocate an event queue entry from the device's event queue, and set it up + * with the parameters given. + * + * Return value: added event + */ struct event_t *gigaset_add_event(struct cardstate *cs, struct at_state_t *at_state, int type, void *ptr, int parameter, void *arg) @@ -404,6 +429,15 @@ static void make_invalid(struct cardstate *cs, unsigned mask) spin_unlock_irqrestore(&drv->lock, flags); } +/** + * gigaset_freecs() - free all associated ressources of a device + * @cs: device descriptor structure. + * + * Stops all tasklets and timers, unregisters the device from all + * subsystems it was registered to, deallocates the device structure + * @cs and all structures referenced from it. + * Operations on the device should be stopped before calling this. + */ void gigaset_freecs(struct cardstate *cs) { int i; @@ -512,7 +546,12 @@ static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct bc_state *bcs, inbuf->inputstate = inputstate; } -/* append received bytes to inbuf */ +/** + * gigaset_fill_inbuf() - append received data to input buffer + * @inbuf: buffer structure. + * @src: received data. + * @numbytes: number of bytes received. + */ int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src, unsigned numbytes) { @@ -612,20 +651,22 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs, return NULL; } -/* gigaset_initcs +/** + * gigaset_initcs() - initialize device structure + * @drv: hardware driver the device belongs to + * @channels: number of B channels supported by device + * @onechannel: !=0 if B channel data and AT commands share one + * communication channel (M10x), + * ==0 if B channels have separate communication channels (base) + * @ignoreframes: number of frames to ignore after setting up B channel + * @cidmode: !=0: start in CallID mode + * @modulename: name of driver module for LL registration + * * Allocate and initialize cardstate structure for Gigaset driver * Calls hardware dependent gigaset_initcshw() function * Calls B channel initialization function gigaset_initbcs() for each B channel - * parameters: - * drv hardware driver the device belongs to - * channels number of B channels supported by device - * onechannel !=0: B channel data and AT commands share one - * communication channel - * ==0: B channels have separate communication channels - * ignoreframes number of frames to ignore after setting up B channel - * cidmode !=0: start in CallID mode - * modulename name of driver module (used for I4L registration) - * return value: + * + * Return value: * pointer to cardstate structure */ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, @@ -843,6 +884,17 @@ static void cleanup_cs(struct cardstate *cs) } +/** + * gigaset_start() - start device operations + * @cs: device descriptor structure. + * + * Prepares the device for use by setting up communication parameters, + * scheduling an EV_START event to initiate device initialization, and + * waiting for completion of the initialization. + * + * Return value: + * 1 - success, 0 - error + */ int gigaset_start(struct cardstate *cs) { unsigned long flags; @@ -885,9 +937,15 @@ error: } EXPORT_SYMBOL_GPL(gigaset_start); -/* gigaset_shutdown - * check if a device is associated to the cardstate structure and stop it - * return value: 0 if ok, -1 if no device was associated +/** + * gigaset_shutdown() - shut down device operations + * @cs: device descriptor structure. + * + * Deactivates the device by scheduling an EV_SHUTDOWN event and + * waiting for completion of the shutdown. + * + * Return value: + * 0 - success, -1 - error (no device associated) */ int gigaset_shutdown(struct cardstate *cs) { @@ -918,6 +976,13 @@ exit: } EXPORT_SYMBOL_GPL(gigaset_shutdown); +/** + * gigaset_stop() - stop device operations + * @cs: device descriptor structure. + * + * Stops operations on the device by scheduling an EV_STOP event and + * waiting for completion of the shutdown. + */ void gigaset_stop(struct cardstate *cs) { mutex_lock(&cs->mutex); @@ -1026,6 +1091,14 @@ struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty) return gigaset_get_cs_by_minor(tty->index + tty->driver->minor_start); } +/** + * gigaset_freedriver() - free all associated ressources of a driver + * @drv: driver descriptor structure. + * + * Unregisters the driver from the system and deallocates the driver + * structure @drv and all structures referenced from it. + * All devices should be shut down before calling this. + */ void gigaset_freedriver(struct gigaset_driver *drv) { unsigned long flags; @@ -1041,14 +1114,16 @@ void gigaset_freedriver(struct gigaset_driver *drv) } EXPORT_SYMBOL_GPL(gigaset_freedriver); -/* gigaset_initdriver +/** + * gigaset_initdriver() - initialize driver structure + * @minor: First minor number + * @minors: Number of minors this driver can handle + * @procname: Name of the driver + * @devname: Name of the device files (prefix without minor number) + * * Allocate and initialize gigaset_driver structure. Initialize interface. - * parameters: - * minor First minor number - * minors Number of minors this driver can handle - * procname Name of the driver - * devname Name of the device files (prefix without minor number) - * return value: + * + * Return value: * Pointer to the gigaset_driver structure on success, NULL on failure. */ struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors, @@ -1101,6 +1176,13 @@ error: } EXPORT_SYMBOL_GPL(gigaset_initdriver); +/** + * gigaset_blockdriver() - block driver + * @drv: driver descriptor structure. + * + * Prevents the driver from attaching new devices, in preparation for + * deregistration. + */ void gigaset_blockdriver(struct gigaset_driver *drv) { drv->blocked = 1; diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c index 926370a7498..cc768caa38f 100644 --- a/drivers/isdn/gigaset/ev-layer.c +++ b/drivers/isdn/gigaset/ev-layer.c @@ -473,8 +473,13 @@ static int cid_of_response(char *s) //FIXME is ;<digit>+ at end of non-CID response really impossible? } -/* This function will be called via task queue from the callback handler. - * We received a modem response and have to handle it.. +/** + * gigaset_handle_modem_response() - process received modem response + * @cs: device descriptor structure. + * + * Called by asyncdata/isocdata if a block of data received from the + * device must be processed as a modem command response. The data is + * already in the cs structure. */ void gigaset_handle_modem_response(struct cardstate *cs) { diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c index 322f16ebc6e..654489d836c 100644 --- a/drivers/isdn/gigaset/i4l.c +++ b/drivers/isdn/gigaset/i4l.c @@ -85,6 +85,14 @@ static int writebuf_from_LL(int driverID, int channel, int ack, return cs->ops->send_skb(bcs, skb); } +/** + * gigaset_skb_sent() - acknowledge sending an skb + * @bcs: B channel descriptor structure. + * @skb: sent data. + * + * Called by hardware module {bas,ser,usb}_gigaset when the data in a + * skb has been successfully sent, for signalling completion to the LL. + */ void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb) { unsigned len; @@ -461,6 +469,15 @@ int gigaset_isdn_setup_accept(struct at_state_t *at_state) return 0; } +/** + * gigaset_isdn_icall() - signal incoming call + * @at_state: connection state structure. + * + * Called by main module to notify the LL that an incoming call has been + * received. @at_state contains the parameters of the call. + * + * Return value: call disposition (ICALL_*) + */ int gigaset_isdn_icall(struct at_state_t *at_state) { struct cardstate *cs = at_state->cs; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index f33ac27de64..6a8e1384e7b 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -616,6 +616,15 @@ void gigaset_if_free(struct cardstate *cs) tty_unregister_device(drv->tty, cs->minor_index); } +/** + * gigaset_if_receive() - pass a received block of data to the tty device + * @cs: device descriptor structure. + * @buffer: received data. + * @len: number of bytes received. + * + * Called by asyncdata/isocdata if a block of data received from the + * device must be sent to userspace through the ttyG* device. + */ void gigaset_if_receive(struct cardstate *cs, unsigned char *buffer, size_t len) { diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index 7fd32f07fb4..9f3ef7b4248 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -976,16 +976,17 @@ void gigaset_isoc_input(struct inbuf_t *inbuf) /* == data output ========================================================== */ -/* gigaset_send_skb - * called by common.c to queue an skb for sending - * and start transmission if necessary - * parameters: - * B Channel control structure - * skb - * return value: - * number of bytes accepted for sending - * (skb->len if ok, 0 if out of buffer space) - * or error code (< 0, eg. -EINVAL) +/** + * gigaset_isoc_send_skb() - queue an skb for sending + * @bcs: B channel descriptor structure. + * @skb: data to send. + * + * Called by i4l.c to queue an skb for sending, and start transmission if + * necessary. + * + * Return value: + * number of bytes accepted for sending (skb->len) if ok, + * error code < 0 (eg. -ENODEV) on error */ int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb) { |