summaryrefslogtreecommitdiffstats
path: root/drivers/leds/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/leds/Kconfig')
-rw-r--r--drivers/leds/Kconfig34
1 files changed, 27 insertions, 7 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9bec8699b8a..23f0d5e99f3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -14,6 +14,13 @@ config LEDS_CLASS
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
+config LEDS_GPIO_REGISTER
+ bool
+ help
+ This option provides the function gpio_led_register_device.
+ As this function is used by arch code it must not be compiled as a
+ module.
+
if NEW_LEDS
comment "LED drivers"
@@ -115,13 +122,6 @@ config LEDS_ALIX2
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
You have to set leds-alix2.force=1 for boards with Award BIOS.
-config LEDS_H1940
- tristate "LED Support for iPAQ H1940 device"
- depends on LEDS_CLASS
- depends on ARCH_H1940
- help
- This option enables support for the LEDs on the h1940.
-
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
depends on LEDS_CLASS
@@ -162,6 +162,16 @@ config LEDS_PCA9532
LED controller. It is generally only useful
as a platform driver
+config LEDS_PCA9532_GPIO
+ bool "Enable GPIO support for PCA9532"
+ depends on LEDS_PCA9532
+ depends on GPIOLIB
+ help
+ Allow unused pins on PCA9532 to be used as gpio.
+
+ To use a pin as gpio pca9532_type in pca9532_platform data needs to
+ set to PCA9532_TYPE_GPIO.
+
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS
@@ -379,6 +389,16 @@ config LEDS_NETXBIG
and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
controlled through a GPIO extension bus.
+config LEDS_ASIC3
+ bool "LED support for the HTC ASIC3"
+ depends on MFD_ASIC3
+ default y
+ help
+ This option enables support for the LEDs on the HTC ASIC3. The HTC
+ ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
+ cannot be used. This driver supports hardware blinking with an on+off
+ period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS