diff options
Diffstat (limited to 'drivers/leds/leds-lp5521.c')
| -rw-r--r-- | drivers/leds/leds-lp5521.c | 147 |
1 files changed, 120 insertions, 27 deletions
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index d62a7982a5e..410a723b869 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -81,18 +81,10 @@ #define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ #define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ #define LP5521_EXEC_RUN 0x2A - -/* Bits in CONFIG register */ -#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ -#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ -#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ -#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ -#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ -#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ -#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ -#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ -#define LP5521_CLK_INT 1 /* Internal clock */ -#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ +#define LP5521_ENABLE_DEFAULT \ + (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM) +#define LP5521_ENABLE_RUN_PROGRAM \ + (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN) /* Status */ #define LP5521_EXT_CLK_USED 0x08 @@ -100,6 +92,9 @@ /* default R channel current register value */ #define LP5521_REG_R_CURR_DEFAULT 0xAF +/* Pattern Mode */ +#define PATTERN_OFF 0 + struct lp5521_engine { int id; u8 mode; @@ -241,15 +236,16 @@ static int lp5521_configure(struct i2c_client *client) { struct lp5521_chip *chip = i2c_get_clientdata(client); int ret; + u8 cfg; lp5521_init_engine(chip); /* Set all PWMs to direct control mode */ - ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); + ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - /* Enable auto-powersave, set charge pump to auto, red to battery */ - ret |= lp5521_write(client, LP5521_REG_CONFIG, - LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + cfg = chip->pdata->update_config ? + : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg); /* Initialize all channels PWM to zero -> leds off */ ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); @@ -258,8 +254,7 @@ static int lp5521_configure(struct i2c_client *client) /* Set engines are set to run state when OP_MODE enables engines */ ret |= lp5521_write(client, LP5521_REG_ENABLE, - LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | - LP5521_EXEC_RUN); + LP5521_ENABLE_RUN_PROGRAM); /* enable takes 500us. 1 - 2 ms leaves some margin */ usleep_range(1000, 2000); @@ -310,8 +305,7 @@ static int lp5521_detect(struct i2c_client *client) int ret; u8 buf; - ret = lp5521_write(client, LP5521_REG_ENABLE, - LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); + ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); if (ret) return ret; /* enable takes 500us. 1 - 2 ms leaves some margin */ @@ -319,7 +313,7 @@ static int lp5521_detect(struct i2c_client *client) ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); if (ret) return ret; - if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) + if (buf != LP5521_ENABLE_DEFAULT) return -ENODEV; return 0; @@ -504,7 +498,7 @@ static ssize_t store_current(struct device *dev, ssize_t ret; unsigned long curr; - if (strict_strtoul(buf, 0, &curr)) + if (kstrtoul(buf, 0, &curr)) return -EINVAL; if (curr > led->max_current) @@ -536,6 +530,97 @@ static ssize_t lp5521_selftest(struct device *dev, return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); } +static void lp5521_clear_program_memory(struct i2c_client *cl) +{ + int i; + u8 rgb_mem[] = { + LP5521_REG_R_PROG_MEM, + LP5521_REG_G_PROG_MEM, + LP5521_REG_B_PROG_MEM, + }; + + for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) { + lp5521_write(cl, rgb_mem[i], 0); + lp5521_write(cl, rgb_mem[i] + 1, 0); + } +} + +static void lp5521_write_program_memory(struct i2c_client *cl, + u8 base, u8 *rgb, int size) +{ + int i; + + if (!rgb || size <= 0) + return; + + for (i = 0; i < size; i++) + lp5521_write(cl, base + i, *(rgb + i)); + + lp5521_write(cl, base + i, 0); + lp5521_write(cl, base + i + 1, 0); +} + +static inline struct lp5521_led_pattern *lp5521_get_pattern + (struct lp5521_chip *chip, u8 offset) +{ + struct lp5521_led_pattern *ptn; + ptn = chip->pdata->patterns + (offset - 1); + return ptn; +} + +static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip) +{ + struct lp5521_led_pattern *ptn; + struct i2c_client *cl = chip->client; + int num_patterns = chip->pdata->num_patterns; + + if (mode > num_patterns || !(chip->pdata->patterns)) + return; + + if (mode == PATTERN_OFF) { + lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); + usleep_range(1000, 2000); + lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); + } else { + ptn = lp5521_get_pattern(chip, mode); + if (!ptn) + return; + + lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); + usleep_range(1000, 2000); + + lp5521_clear_program_memory(cl); + + lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM, + ptn->r, ptn->size_r); + lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM, + ptn->g, ptn->size_g); + lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM, + ptn->b, ptn->size_b); + + lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN); + usleep_range(1000, 2000); + lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); + } +} + +static ssize_t store_led_pattern(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 16, &val); + if (ret) + return ret; + + lp5521_run_led_pattern(val, chip); + + return len; +} + /* led class device attributes */ static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current); static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); @@ -561,6 +646,7 @@ static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load); static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load); static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load); static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); +static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern); static struct attribute *lp5521_attributes[] = { &dev_attr_engine1_mode.attr, @@ -570,6 +656,7 @@ static struct attribute *lp5521_attributes[] = { &dev_attr_engine1_load.attr, &dev_attr_engine2_load.attr, &dev_attr_engine3_load.attr, + &dev_attr_led_pattern.attr, NULL }; @@ -620,10 +707,15 @@ static int __devinit lp5521_init_led(struct lp5521_led *led, return -EINVAL; } - snprintf(name, sizeof(name), "%s:channel%d", - pdata->label ?: client->name, chan); led->cdev.brightness_set = lp5521_set_brightness; - led->cdev.name = name; + if (pdata->led_config[chan].name) { + led->cdev.name = pdata->led_config[chan].name; + } else { + snprintf(name, sizeof(name), "%s:channel%d", + pdata->label ?: client->name, chan); + led->cdev.name = name; + } + res = led_classdev_register(dev, &led->cdev); if (res < 0) { dev_err(dev, "couldn't register led on channel %d\n", chan); @@ -692,9 +784,9 @@ static int __devinit lp5521_probe(struct i2c_client *client, * otherwise further access to the R G B channels in the * LP5521_REG_ENABLE register will not have any effect - strange! */ - lp5521_read(client, LP5521_REG_R_CURRENT, &buf); + ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf); if (buf != LP5521_REG_R_CURR_DEFAULT) { - dev_err(&client->dev, "error in reseting chip\n"); + dev_err(&client->dev, "error in resetting chip\n"); goto fail2; } usleep_range(10000, 20000); @@ -767,6 +859,7 @@ static int __devexit lp5521_remove(struct i2c_client *client) struct lp5521_chip *chip = i2c_get_clientdata(client); int i; + lp5521_run_led_pattern(PATTERN_OFF, chip); lp5521_unregister_sysfs(client); for (i = 0; i < chip->num_leds; i++) { |