summaryrefslogtreecommitdiffstats
path: root/drivers/leds
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/Kconfig34
-rw-r--r--drivers/leds/Makefile3
-rw-r--r--drivers/leds/led-class.c3
-rw-r--r--drivers/leds/leds-88pm860x.c7
-rw-r--r--drivers/leds/leds-asic3.c165
-rw-r--r--drivers/leds/leds-gpio-register.c42
-rw-r--r--drivers/leds/leds-h1940.c170
-rw-r--r--drivers/leds/leds-lm3530.c74
-rw-r--r--drivers/leds/leds-mc13783.c9
-rw-r--r--drivers/leds/leds-pca9532.c193
-rw-r--r--drivers/leds/leds-regulator.c4
-rw-r--r--drivers/leds/leds-wm8350.c4
-rw-r--r--drivers/leds/leds.h7
-rw-r--r--drivers/leds/ledtrig-timer.c3
14 files changed, 495 insertions, 223 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9bec8699b8a..23f0d5e99f3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -14,6 +14,13 @@ config LEDS_CLASS
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
+config LEDS_GPIO_REGISTER
+ bool
+ help
+ This option provides the function gpio_led_register_device.
+ As this function is used by arch code it must not be compiled as a
+ module.
+
if NEW_LEDS
comment "LED drivers"
@@ -115,13 +122,6 @@ config LEDS_ALIX2
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
You have to set leds-alix2.force=1 for boards with Award BIOS.
-config LEDS_H1940
- tristate "LED Support for iPAQ H1940 device"
- depends on LEDS_CLASS
- depends on ARCH_H1940
- help
- This option enables support for the LEDs on the h1940.
-
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
depends on LEDS_CLASS
@@ -162,6 +162,16 @@ config LEDS_PCA9532
LED controller. It is generally only useful
as a platform driver
+config LEDS_PCA9532_GPIO
+ bool "Enable GPIO support for PCA9532"
+ depends on LEDS_PCA9532
+ depends on GPIOLIB
+ help
+ Allow unused pins on PCA9532 to be used as gpio.
+
+ To use a pin as gpio pca9532_type in pca9532_platform data needs to
+ set to PCA9532_TYPE_GPIO.
+
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS
@@ -379,6 +389,16 @@ config LEDS_NETXBIG
and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
controlled through a GPIO extension bus.
+config LEDS_ASIC3
+ bool "LED support for the HTC ASIC3"
+ depends on MFD_ASIC3
+ default y
+ help
+ This option enables support for the LEDs on the HTC ASIC3. The HTC
+ ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
+ cannot be used. This driver supports hardware blinking with an on+off
+ period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 39c80fca84d..bbfd2e367dc 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -17,11 +17,11 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NET5501) += leds-net5501.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_ALIX2) += leds-alix2.o
-obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
+obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
@@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
+obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index d5a4ade8899..dc3d3d83191 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -131,7 +131,8 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
if (!led_cdev->blink_brightness)
led_cdev->blink_brightness = led_cdev->max_brightness;
- if (delay_on == led_cdev->blink_delay_on &&
+ if (led_get_trigger_data(led_cdev) &&
+ delay_on == led_cdev->blink_delay_on &&
delay_off == led_cdev->blink_delay_off)
return;
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 416def84d04..0d4c16678ac 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -17,7 +17,6 @@
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
-#include <linux/mfd/core.h>
#include <linux/mfd/88pm860x.h>
#define LED_PWM_SHIFT (3)
@@ -171,7 +170,6 @@ static int pm860x_led_probe(struct platform_device *pdev)
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm860x_led_pdata *pdata;
struct pm860x_led *data;
- struct mfd_cell *cell;
struct resource *res;
int ret;
@@ -181,10 +179,7 @@ static int pm860x_led_probe(struct platform_device *pdev)
return -EINVAL;
}
- cell = pdev->dev.platform_data;
- if (cell == NULL)
- return -ENODEV;
- pdata = cell->mfd_data;
+ pdata = pdev->dev.platform_data;
if (pdata == NULL) {
dev_err(&pdev->dev, "No platform data!\n");
return -EINVAL;
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
new file mode 100644
index 00000000000..22f847c890c
--- /dev/null
+++ b/drivers/leds/leds-asic3.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/asic3.h>
+#include <linux/mfd/core.h>
+
+/*
+ * The HTC ASIC3 LED GPIOs are inputs, not outputs.
+ * Hence we turn the LEDs on/off via the TimeBase register.
+ */
+
+/*
+ * When TimeBase is 4 the clock resolution is about 32Hz.
+ * This driver supports hardware blinking with an on+off
+ * period from 62ms (2 clocks) to 125s (4000 clocks).
+ */
+#define MS_TO_CLK(ms) DIV_ROUND_CLOSEST(((ms)*1024), 32000)
+#define CLK_TO_MS(clk) (((clk)*32000)/1024)
+#define MAX_CLK 4000 /* Fits into 12-bit Time registers */
+#define MAX_MS CLK_TO_MS(MAX_CLK)
+
+static const unsigned int led_n_base[ASIC3_NUM_LEDS] = {
+ [0] = ASIC3_LED_0_Base,
+ [1] = ASIC3_LED_1_Base,
+ [2] = ASIC3_LED_2_Base,
+};
+
+static void brightness_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+ u32 timebase;
+ unsigned int base;
+
+ timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4);
+
+ base = led_n_base[cell->id];
+ asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32);
+ asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32);
+ asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
+ asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase);
+}
+
+static int blink_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+ u32 on;
+ u32 off;
+ unsigned int base;
+
+ if (*delay_on > MAX_MS || *delay_off > MAX_MS)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* If both are zero then a sensible default should be chosen */
+ on = MS_TO_CLK(500);
+ off = MS_TO_CLK(500);
+ } else {
+ on = MS_TO_CLK(*delay_on);
+ off = MS_TO_CLK(*delay_off);
+ if ((on + off) > MAX_CLK)
+ return -EINVAL;
+ }
+
+ base = led_n_base[cell->id];
+ asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off));
+ asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on);
+ asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
+ asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4));
+
+ *delay_on = CLK_TO_MS(on);
+ *delay_off = CLK_TO_MS(off);
+
+ return 0;
+}
+
+static int __devinit asic3_led_probe(struct platform_device *pdev)
+{
+ struct asic3_led *led = pdev->dev.platform_data;
+ int ret;
+
+ ret = mfd_cell_enable(pdev);
+ if (ret < 0)
+ goto ret0;
+
+ led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL);
+ if (!led->cdev) {
+ ret = -ENOMEM;
+ goto ret1;
+ }
+
+ led->cdev->name = led->name;
+ led->cdev->default_trigger = led->default_trigger;
+ led->cdev->brightness_set = brightness_set;
+ led->cdev->blink_set = blink_set;
+
+ ret = led_classdev_register(&pdev->dev, led->cdev);
+ if (ret < 0)
+ goto ret2;
+
+ return 0;
+
+ret2:
+ kfree(led->cdev);
+ret1:
+ (void) mfd_cell_disable(pdev);
+ret0:
+ return ret;
+}
+
+static int __devexit asic3_led_remove(struct platform_device *pdev)
+{
+ struct asic3_led *led = pdev->dev.platform_data;
+
+ led_classdev_unregister(led->cdev);
+
+ kfree(led->cdev);
+
+ return mfd_cell_disable(pdev);
+}
+
+static struct platform_driver asic3_led_driver = {
+ .probe = asic3_led_probe,
+ .remove = __devexit_p(asic3_led_remove),
+ .driver = {
+ .name = "leds-asic3",
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:leds-asic3");
+
+static int __init asic3_led_init(void)
+{
+ return platform_driver_register(&asic3_led_driver);
+}
+
+static void __exit asic3_led_exit(void)
+{
+ platform_driver_unregister(&asic3_led_driver);
+}
+
+module_init(asic3_led_init);
+module_exit(asic3_led_exit);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("HTC ASIC3 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-gpio-register.c b/drivers/leds/leds-gpio-register.c
new file mode 100644
index 00000000000..1c4ed5510f3
--- /dev/null
+++ b/drivers/leds/leds-gpio-register.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+/**
+ * gpio_led_register_device - register a gpio-led device
+ * @pdata: the platform data used for the new device
+ *
+ * Makes a copy of pdata and pdata->leds and registers a new leds-gpio device
+ * with the result. This allows to have pdata and pdata-leds in .init.rodata
+ * and so saves some bytes compared to a static struct platform_device with
+ * static platform data.
+ *
+ * Returns the registered device or an error pointer.
+ */
+struct platform_device *__init gpio_led_register_device(
+ int id, const struct gpio_led_platform_data *pdata)
+{
+ struct platform_device *ret;
+ struct gpio_led_platform_data _pdata = *pdata;
+
+ _pdata.leds = kmemdup(pdata->leds,
+ pdata->num_leds * sizeof(*pdata->leds), GFP_KERNEL);
+ if (!_pdata.leds)
+ return ERR_PTR(-ENOMEM);
+
+ ret = platform_device_register_resndata(NULL, "leds-gpio", id,
+ NULL, 0, &_pdata, sizeof(_pdata));
+ if (IS_ERR(ret))
+ kfree(_pdata.leds);
+
+ return ret;
+}
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
deleted file mode 100644
index 173d104d9ff..00000000000
--- a/drivers/leds/leds-h1940.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * drivers/leds/leds-h1940.c
- * Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * H1940 leds driver
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-
-/*
- * Green led.
- */
-static void h1940_greenled_set(struct led_classdev *led_dev,
- enum led_brightness value)
-{
- switch (value) {
- case LED_HALF:
- h1940_latch_control(0, H1940_LATCH_LED_FLASH);
- s3c2410_gpio_setpin(S3C2410_GPA7, 1);
- break;
- case LED_FULL:
- h1940_latch_control(0, H1940_LATCH_LED_GREEN);
- s3c2410_gpio_setpin(S3C2410_GPA7, 1);
- break;
- default:
- case LED_OFF:
- h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
- h1940_latch_control(H1940_LATCH_LED_GREEN, 0);
- s3c2410_gpio_setpin(S3C2410_GPA7, 0);
- break;
- }
-}
-
-static struct led_classdev h1940_greenled = {
- .name = "h1940:green",
- .brightness_set = h1940_greenled_set,
- .default_trigger = "h1940-charger",
-};
-
-/*
- * Red led.
- */
-static void h1940_redled_set(struct led_classdev *led_dev,
- enum led_brightness value)
-{
- switch (value) {
- case LED_HALF:
- h1940_latch_control(0, H1940_LATCH_LED_FLASH);
- s3c2410_gpio_setpin(S3C2410_GPA1, 1);
- break;
- case LED_FULL:
- h1940_latch_control(0, H1940_LATCH_LED_RED);
- s3c2410_gpio_setpin(S3C2410_GPA1, 1);
- break;
- default:
- case LED_OFF:
- h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
- h1940_latch_control(H1940_LATCH_LED_RED, 0);
- s3c2410_gpio_setpin(S3C2410_GPA1, 0);
- break;
- }
-}
-
-static struct led_classdev h1940_redled = {
- .name = "h1940:red",
- .brightness_set = h1940_redled_set,
- .default_trigger = "h1940-charger",
-};
-
-/*
- * Blue led.
- * (it can only be blue flashing led)
- */
-static void h1940_blueled_set(struct led_classdev *led_dev,
- enum led_brightness value)
-{
- if (value) {
- /* flashing Blue */
- h1940_latch_control(0, H1940_LATCH_LED_FLASH);
- s3c2410_gpio_setpin(S3C2410_GPA3, 1);
- } else {
- h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
- s3c2410_gpio_setpin(S3C2410_GPA3, 0);
- }
-
-}
-
-static struct led_classdev h1940_blueled = {
- .name = "h1940:blue",
- .brightness_set = h1940_blueled_set,
- .default_trigger = "h1940-bluetooth",
-};
-
-static int __devinit h1940leds_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &h1940_greenled);
- if (ret)
- goto err_green;
-
- ret = led_classdev_register(&pdev->dev, &h1940_redled);
- if (ret)
- goto err_red;
-
- ret = led_classdev_register(&pdev->dev, &h1940_blueled);
- if (ret)
- goto err_blue;
-
- return 0;
-
-err_blue:
- led_classdev_unregister(&h1940_redled);
-err_red:
- led_classdev_unregister(&h1940_greenled);
-err_green:
- return ret;
-}
-
-static int h1940leds_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&h1940_greenled);
- led_classdev_unregister(&h1940_redled);
- led_classdev_unregister(&h1940_blueled);
- return 0;
-}
-
-
-static struct platform_driver h1940leds_driver = {
- .driver = {
- .name = "h1940-leds",
- .owner = THIS_MODULE,
- },
- .probe = h1940leds_probe,
- .remove = h1940leds_remove,
-};
-
-
-static int __init h1940leds_init(void)
-{
- return platform_driver_register(&h1940leds_driver);
-}
-
-static void __exit h1940leds_exit(void)
-{
- platform_driver_unregister(&h1940leds_driver);
-}
-
-module_init(h1940leds_init);
-module_exit(h1940leds_exit);
-
-MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
-MODULE_DESCRIPTION("LED driver for the iPAQ H1940");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:h1940-leds");
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index e7089a1f6cb..4d7ce7631ac 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -17,6 +17,7 @@
#include <linux/input.h>
#include <linux/led-lm3530.h>
#include <linux/types.h>
+#include <linux/regulator/consumer.h>
#define LM3530_LED_DEV "lcd-backlight"
#define LM3530_NAME "lm3530-led"
@@ -96,12 +97,18 @@ static struct lm3530_mode_map mode_map[] = {
* @client: i2c client
* @pdata: LM3530 platform data
* @mode: mode of operation - manual, ALS, PWM
+ * @regulator: regulator
+ * @brighness: previous brightness value
+ * @enable: regulator is enabled
*/
struct lm3530_data {
struct led_classdev led_dev;
struct i2c_client *client;
struct lm3530_platform_data *pdata;
enum lm3530_mode mode;
+ struct regulator *regulator;
+ enum led_brightness brightness;
+ bool enable;
};
static const u8 lm3530_reg[LM3530_REG_MAX] = {
@@ -172,7 +179,10 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
brt_ramp = (pltfm->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
(pltfm->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
- brightness = pltfm->brt_val;
+ if (drvdata->brightness)
+ brightness = drvdata->brightness;
+ else
+ brightness = drvdata->brightness = pltfm->brt_val;
reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
reg_val[1] = als_config; /* LM3530_ALS_CONFIG */
@@ -190,6 +200,16 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
reg_val[13] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */
reg_val[14] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */
+ if (!drvdata->enable) {
+ ret = regulator_enable(drvdata->regulator);
+ if (ret) {
+ dev_err(&drvdata->client->dev,
+ "Enable regulator failed\n");
+ return ret;
+ }
+ drvdata->enable = true;
+ }
+
for (i = 0; i < LM3530_REG_MAX; i++) {
ret = i2c_smbus_write_byte_data(client,
lm3530_reg[i], reg_val[i]);
@@ -210,12 +230,31 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,
switch (drvdata->mode) {
case LM3530_BL_MODE_MANUAL:
+ if (!drvdata->enable) {
+ err = lm3530_init_registers(drvdata);
+ if (err) {
+ dev_err(&drvdata->client->dev,
+ "Register Init failed: %d\n", err);
+ break;
+ }
+ }
+
/* set the brightness in brightness control register*/
err = i2c_smbus_write_byte_data(drvdata->client,
LM3530_BRT_CTRL_REG, brt_val / 2);
if (err)
dev_err(&drvdata->client->dev,
"Unable to set brightness: %d\n", err);
+ else
+ drvdata->brightness = brt_val / 2;
+
+ if (brt_val == 0) {
+ err = regulator_disable(drvdata->regulator);
+ if (err)
+ dev_err(&drvdata->client->dev,
+ "Disable regulator failed\n");
+ drvdata->enable = false;
+ }
break;
case LM3530_BL_MODE_ALS:
break;
@@ -297,20 +336,31 @@ static int __devinit lm3530_probe(struct i2c_client *client,
drvdata->mode = pdata->mode;
drvdata->client = client;
drvdata->pdata = pdata;
+ drvdata->brightness = LED_OFF;
+ drvdata->enable = false;
drvdata->led_dev.name = LM3530_LED_DEV;
drvdata->led_dev.brightness_set = lm3530_brightness_set;
i2c_set_clientdata(client, drvdata);
- err = lm3530_init_registers(drvdata);
- if (err < 0) {
- dev_err(&client->dev, "Register Init failed: %d\n", err);
- err = -ENODEV;
- goto err_reg_init;
+ drvdata->regulator = regulator_get(&client->dev, "vin");
+ if (IS_ERR(drvdata->regulator)) {
+ dev_err(&client->dev, "regulator get failed\n");
+ err = PTR_ERR(drvdata->regulator);
+ drvdata->regulator = NULL;
+ goto err_regulator_get;
}
- err = led_classdev_register((struct device *)
- &client->dev, &drvdata->led_dev);
+ if (drvdata->pdata->brt_val) {
+ err = lm3530_init_registers(drvdata);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Register Init failed: %d\n", err);
+ err = -ENODEV;
+ goto err_reg_init;
+ }
+ }
+ err = led_classdev_register(&client->dev, &drvdata->led_dev);
if (err < 0) {
dev_err(&client->dev, "Register led class failed: %d\n", err);
err = -ENODEV;
@@ -330,6 +380,9 @@ err_create_file:
led_classdev_unregister(&drvdata->led_dev);
err_class_register:
err_reg_init:
+ regulator_put(drvdata->regulator);
+err_regulator_get:
+ i2c_set_clientdata(client, NULL);
kfree(drvdata);
err_out:
return err;
@@ -340,6 +393,10 @@ static int __devexit lm3530_remove(struct i2c_client *client)
struct lm3530_data *drvdata = i2c_get_clientdata(client);
device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
+
+ if (drvdata->enable)
+ regulator_disable(drvdata->regulator);
+ regulator_put(drvdata->regulator);
led_classdev_unregister(&drvdata->led_dev);
kfree(drvdata);
return 0;
@@ -349,6 +406,7 @@ static const struct i2c_device_id lm3530_id[] = {
{LM3530_NAME, 0},
{}
};
+MODULE_DEVICE_TABLE(i2c, lm3530_id);
static struct i2c_driver lm3530_i2c_driver = {
.probe = lm3530_probe,
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index 06a5bb48470..f369e56d654 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -22,7 +22,6 @@
#include <linux/leds.h>
#include <linux/workqueue.h>
#include <linux/mfd/mc13783.h>
-#include <linux/mfd/core.h>
#include <linux/slab.h>
struct mc13783_led {
@@ -184,7 +183,7 @@ static int __devinit mc13783_led_setup(struct mc13783_led *led, int max_current)
static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = mfd_get_data(pdev);
+ struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
int ret = 0;
int reg = 0;
@@ -235,7 +234,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
MC13783_LED_Cx_PERIOD;
if (pdata->flags & MC13783_LED_TRIODE_TC3)
- reg |= MC13783_LED_Cx_TRIODE_TC_BIT;;
+ reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
if (ret)
@@ -265,7 +264,7 @@ out:
static int __devinit mc13783_led_probe(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = mfd_get_data(pdev);
+ struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13783_led_platform_data *led_cur;
struct mc13783_led *led, *led_dat;
int ret, i;
@@ -352,7 +351,7 @@ err_free:
static int __devexit mc13783_led_remove(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = mfd_get_data(pdev);
+ struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13783_led *led = platform_get_drvdata(pdev);
struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
int i;
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index afac338d502..d8d3a1e910a 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -1,13 +1,14 @@
/*
* pca9532.c - 16-bit Led dimmer
*
+ * Copyright (C) 2011 Jan Weitzel
* Copyright (C) 2008 Riku Voipio
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
- * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
*
*/
@@ -19,21 +20,32 @@
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/leds-pca9532.h>
+#include <linux/gpio.h>
-#define PCA9532_REG_PSC(i) (0x2+(i)*2)
-#define PCA9532_REG_PWM(i) (0x3+(i)*2)
-#define PCA9532_REG_LS0 0x6
-#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0)
-#define LED_NUM(led) (led & 0x3)
+/* m = num_leds*/
+#define PCA9532_REG_INPUT(i) ((i) >> 3)
+#define PCA9532_REG_OFFSET(m) ((m) >> 4)
+#define PCA9532_REG_PSC(m, i) (PCA9532_REG_OFFSET(m) + 0x1 + (i) * 2)
+#define PCA9532_REG_PWM(m, i) (PCA9532_REG_OFFSET(m) + 0x2 + (i) * 2)
+#define LED_REG(m, led) (PCA9532_REG_OFFSET(m) + 0x5 + (led >> 2))
+#define LED_NUM(led) (led & 0x3)
#define ldev_to_led(c) container_of(c, struct pca9532_led, ldev)
+struct pca9532_chip_info {
+ u8 num_leds;
+};
+
struct pca9532_data {
struct i2c_client *client;
struct pca9532_led leds[16];
struct mutex update_lock;
struct input_dev *idev;
struct work_struct work;
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ struct gpio_chip gpio;
+#endif
+ const struct pca9532_chip_info *chip_info;
u8 pwm[2];
u8 psc[2];
};
@@ -42,23 +54,48 @@ static int pca9532_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int pca9532_remove(struct i2c_client *client);
+enum {
+ pca9530,
+ pca9531,
+ pca9532,
+ pca9533,
+};
+
static const struct i2c_device_id pca9532_id[] = {
- { "pca9532", 0 },
+ { "pca9530", pca9530 },
+ { "pca9531", pca9531 },
+ { "pca9532", pca9532 },
+ { "pca9533", pca9533 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca9532_id);
+static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
+ [pca9530] = {
+ .num_leds = 2,
+ },
+ [pca9531] = {
+ .num_leds = 8,
+ },
+ [pca9532] = {
+ .num_leds = 16,
+ },
+ [pca9533] = {
+ .num_leds = 4,
+ },
+};
+
static struct i2c_driver pca9532_driver = {
.driver = {
- .name = "pca9532",
+ .name = "pca953x",
},
.probe = pca9532_probe,
.remove = pca9532_remove,
.id_table = pca9532_id,
};
-/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
* the clever Thecus people are using one pwm to drive the beeper. So,
* as a compromise we average one pwm to the values requested by all
* leds that are not ON/OFF.
@@ -68,7 +105,7 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
{
int a = 0, b = 0, i = 0;
struct pca9532_data *data = i2c_get_clientdata(client);
- for (i = 0; i < 16; i++) {
+ for (i = 0; i < data->chip_info->num_leds; i++) {
if (data->leds[i].type == PCA9532_TYPE_LED &&
data->leds[i].state == PCA9532_PWM0+pwm) {
a++;
@@ -92,10 +129,12 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
static int pca9532_setpwm(struct i2c_client *client, int pwm)
{
struct pca9532_data *data = i2c_get_clientdata(client);
+ u8 maxleds = data->chip_info->num_leds;
+
mutex_lock(&data->update_lock);
- i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, pwm),
data->pwm[pwm]);
- i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, pwm),
data->psc[pwm]);
mutex_unlock(&data->update_lock);
return 0;
@@ -106,15 +145,16 @@ static void pca9532_setled(struct pca9532_led *led)
{
struct i2c_client *client = led->client;
struct pca9532_data *data = i2c_get_clientdata(client);
+ u8 maxleds = data->chip_info->num_leds;
char reg;
mutex_lock(&data->update_lock);
- reg = i2c_smbus_read_byte_data(client, LED_REG(led->id));
+ reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
/* zero led bits */
reg = reg & ~(0x3<<LED_NUM(led->id)*2);
/* set the new value */
reg = reg | (led->state << LED_NUM(led->id)*2);
- i2c_smbus_write_byte_data(client, LED_REG(led->id), reg);
+ i2c_smbus_write_byte_data(client, LED_REG(maxleds, led->id), reg);
mutex_unlock(&data->update_lock);
}
@@ -183,10 +223,12 @@ static int pca9532_event(struct input_dev *dev, unsigned int type,
static void pca9532_input_work(struct work_struct *work)
{
- struct pca9532_data *data;
- data = container_of(work, struct pca9532_data, work);
+ struct pca9532_data *data =
+ container_of(work, struct pca9532_data, work);
+ u8 maxleds = data->chip_info->num_leds;
+
mutex_lock(&data->update_lock);
- i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
+ i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(maxleds, 1),
data->pwm[1]);
mutex_unlock(&data->update_lock);
}
@@ -200,16 +242,68 @@ static void pca9532_led_work(struct work_struct *work)
pca9532_setled(led);
}
-static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ struct pca9532_led *led = &data->leds[offset];
+
+ if (led->type == PCA9532_TYPE_GPIO)
+ return 0;
+
+ return -EBUSY;
+}
+
+static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ struct pca9532_led *led = &data->leds[offset];
+
+ if (val)
+ led->state = PCA9532_ON;
+ else
+ led->state = PCA9532_OFF;
+
+ pca9532_setled(led);
+}
+
+static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ unsigned char reg;
+
+ reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
+
+ return !!(reg & (1 << (offset % 8)));
+}
+
+static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ /* To use as input ensure pin is not driven */
+ pca9532_gpio_set_value(gc, offset, 0);
+
+ return 0;
+}
+
+static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
+{
+ pca9532_gpio_set_value(gc, offset, val);
+
+ return 0;
+}
+#endif /* CONFIG_LEDS_PCA9532_GPIO */
+
+static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
{
int i = n_devs;
if (!data)
- return;
+ return -EINVAL;
while (--i >= 0) {
switch (data->leds[i].type) {
case PCA9532_TYPE_NONE:
+ case PCA9532_TYPE_GPIO:
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
@@ -224,23 +318,38 @@ static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
break;
}
}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ if (data->gpio.dev) {
+ int err = gpiochip_remove(&data->gpio);
+ if (err) {
+ dev_err(&data->client->dev, "%s failed, %d\n",
+ "gpiochip_remove()", err);
+ return err;
+ }
+ }
+#endif
+
+ return 0;
}
static int pca9532_configure(struct i2c_client *client,
struct pca9532_data *data, struct pca9532_platform_data *pdata)
{
int i, err = 0;
+ int gpios = 0;
+ u8 maxleds = data->chip_info->num_leds;
for (i = 0; i < 2; i++) {
data->pwm[i] = pdata->pwm[i];
data->psc[i] = pdata->psc[i];
- i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i),
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, i),
data->pwm[i]);
- i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i),
+ i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, i),
data->psc[i]);
}
- for (i = 0; i < 16; i++) {
+ for (i = 0; i < data->chip_info->num_leds; i++) {
struct pca9532_led *led = &data->leds[i];
struct pca9532_led *pled = &pdata->leds[i];
led->client = client;
@@ -249,6 +358,9 @@ static int pca9532_configure(struct i2c_client *client,
switch (led->type) {
case PCA9532_TYPE_NONE:
break;
+ case PCA9532_TYPE_GPIO:
+ gpios++;
+ break;
case PCA9532_TYPE_LED:
led->state = pled->state;
led->name = pled->name;
@@ -297,6 +409,34 @@ static int pca9532_configure(struct i2c_client *client,
break;
}
}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ if (gpios) {
+ data->gpio.label = "gpio-pca9532";
+ data->gpio.direction_input = pca9532_gpio_direction_input;
+ data->gpio.direction_output = pca9532_gpio_direction_output;
+ data->gpio.set = pca9532_gpio_set_value;
+ data->gpio.get = pca9532_gpio_get_value;
+ data->gpio.request = pca9532_gpio_request_pin;
+ data->gpio.can_sleep = 1;
+ data->gpio.base = pdata->gpio_base;
+ data->gpio.ngpio = data->chip_info->num_leds;
+ data->gpio.dev = &client->dev;
+ data->gpio.owner = THIS_MODULE;
+
+ err = gpiochip_add(&data->gpio);
+ if (err) {
+ /* Use data->gpio.dev as a flag for freeing gpiochip */
+ data->gpio.dev = NULL;
+ dev_warn(&client->dev, "could not add gpiochip\n");
+ } else {
+ dev_info(&client->dev, "gpios %i...%i\n",
+ data->gpio.base, data->gpio.base +
+ data->gpio.ngpio - 1);
+ }
+ }
+#endif
+
return 0;
exit:
@@ -322,6 +462,8 @@ static int pca9532_probe(struct i2c_client *client,
if (!data)
return -ENOMEM;
+ data->chip_info = &pca9532_chip_info_tbl[id->driver_data];
+
dev_info(&client->dev, "setting platform data\n");
i2c_set_clientdata(client, data);
data->client = client;
@@ -337,7 +479,12 @@ static int pca9532_probe(struct i2c_client *client,
static int pca9532_remove(struct i2c_client *client)
{
struct pca9532_data *data = i2c_get_clientdata(client);
- pca9532_destroy_devices(data, 16);
+ int err;
+
+ err = pca9532_destroy_devices(data, data->chip_info->num_leds);
+ if (err)
+ return err;
+
kfree(data);
return 0;
}
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index 3790816643b..8497f56f8e4 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -178,6 +178,10 @@ static int __devinit regulator_led_probe(struct platform_device *pdev)
led->cdev.flags |= LED_CORE_SUSPENDRESUME;
led->vcc = vcc;
+ /* to handle correctly an already enabled regulator */
+ if (regulator_is_enabled(led->vcc))
+ led->enabled = 1;
+
mutex_init(&led->mutex);
INIT_WORK(&led->work, led_work);
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index a0452327328..f14edd82cb0 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -215,13 +215,13 @@ static int wm8350_led_probe(struct platform_device *pdev)
isink = regulator_get(&pdev->dev, "led_isink");
if (IS_ERR(isink)) {
- printk(KERN_ERR "%s: cant get ISINK\n", __func__);
+ printk(KERN_ERR "%s: can't get ISINK\n", __func__);
return PTR_ERR(isink);
}
dcdc = regulator_get(&pdev->dev, "led_vcc");
if (IS_ERR(dcdc)) {
- printk(KERN_ERR "%s: cant get DCDC\n", __func__);
+ printk(KERN_ERR "%s: can't get DCDC\n", __func__);
ret = PTR_ERR(dcdc);
goto err_isink;
}
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 2dd8ecbfdc3..e77c7f8dcdd 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -40,10 +40,17 @@ void led_trigger_set_default(struct led_classdev *led_cdev);
void led_trigger_set(struct led_classdev *led_cdev,
struct led_trigger *trigger);
void led_trigger_remove(struct led_classdev *led_cdev);
+
+static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
+{
+ return led_cdev->trigger_data;
+}
+
#else
#define led_trigger_set_default(x) do {} while (0)
#define led_trigger_set(x, y) do {} while (0)
#define led_trigger_remove(x) do {} while (0)
+#define led_get_trigger_data(x) (NULL)
#endif
ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index b09bcbeade9..d87c9d02f78 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -91,6 +91,9 @@ static void timer_trig_activate(struct led_classdev *led_cdev)
if (rc)
goto err_out_delayon;
+ led_blink_set(led_cdev, &led_cdev->blink_delay_on,
+ &led_cdev->blink_delay_off);
+
led_cdev->trigger_data = (void *)1;
return;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 05:38:54 +0000