diff options
Diffstat (limited to 'drivers/leds')
| -rw-r--r-- | drivers/leds/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/leds/Makefile | 2 | ||||
| -rw-r--r-- | drivers/leds/led-triggers.c | 3 | ||||
| -rw-r--r-- | drivers/leds/leds-atmel-pwm.c | 2 | ||||
| -rw-r--r-- | drivers/leds/leds-h1940.c | 9 | ||||
| -rw-r--r-- | drivers/leds/leds-pca9532.c | 337 | ||||
| -rw-r--r-- | drivers/leds/leds-pca955x.c | 384 |
7 files changed, 748 insertions, 5 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 86a369bc57d..9556262dda5 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -103,6 +103,14 @@ config LEDS_HP6XX This option enables led support for the handheld HP Jornada 620/660/680/690. +config LEDS_PCA9532 + tristate "LED driver for PCA9532 dimmer" + depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL + help + This option enables support for NXP pca9532 + led controller. It is generally only usefull + as a platform driver + config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS && GENERIC_GPIO @@ -147,6 +155,14 @@ config LEDS_CLEVO_MAIL To compile this driver as a module, choose M here: the module will be called leds-clevo-mail. +config LEDS_PCA955X + tristate "LED Support for PCA955x I2C chips" + depends on LEDS_CLASS && I2C + help + This option enables support for LEDs connected to PCA955x + LED driver chips accessed via the I2C bus. Supported + devices include PCA9550, PCA9551, PCA9552, and PCA9553. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 973d626f5f4..ff7982b4456 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -16,11 +16,13 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_H1940) += leds-h1940.o obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o +obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o +obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o # LED Triggers obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index 0f242b3f09b..f910eaffe3a 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -111,16 +111,17 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger) flags); if (led_cdev->trigger->deactivate) led_cdev->trigger->deactivate(led_cdev); + led_cdev->trigger = NULL; led_set_brightness(led_cdev, LED_OFF); } if (trigger) { write_lock_irqsave(&trigger->leddev_list_lock, flags); list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs); write_unlock_irqrestore(&trigger->leddev_list_lock, flags); + led_cdev->trigger = trigger; if (trigger->activate) trigger->activate(led_cdev); } - led_cdev->trigger = trigger; } EXPORT_SYMBOL_GPL(led_trigger_set); diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c index 28db6c1444e..52297c3ab24 100644 --- a/drivers/leds/leds-atmel-pwm.c +++ b/drivers/leds/leds-atmel-pwm.c @@ -37,7 +37,7 @@ static int __init pwmled_probe(struct platform_device *pdev) { const struct gpio_led_platform_data *pdata; struct pwmled *leds; - unsigned i; + int i; int status; pdata = pdev->dev.platform_data; diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c index bcec4223038..73c70502168 100644 --- a/drivers/leds/leds-h1940.c +++ b/drivers/leds/leds-h1940.c @@ -23,7 +23,8 @@ /* * Green led. */ -void h1940_greenled_set(struct led_classdev *led_dev, enum led_brightness value) +static void h1940_greenled_set(struct led_classdev *led_dev, + enum led_brightness value) { switch (value) { case LED_HALF: @@ -52,7 +53,8 @@ static struct led_classdev h1940_greenled = { /* * Red led. */ -void h1940_redled_set(struct led_classdev *led_dev, enum led_brightness value) +static void h1940_redled_set(struct led_classdev *led_dev, + enum led_brightness value) { switch (value) { case LED_HALF: @@ -82,7 +84,8 @@ static struct led_classdev h1940_redled = { * Blue led. * (it can only be blue flashing led) */ -void h1940_blueled_set(struct led_classdev *led_dev, enum led_brightness value) +static void h1940_blueled_set(struct led_classdev *led_dev, + enum led_brightness value) { if (value) { /* flashing Blue */ diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c new file mode 100644 index 00000000000..4064d4f6b33 --- /dev/null +++ b/drivers/leds/leds-pca9532.c @@ -0,0 +1,337 @@ +/* + * pca9532.c - 16-bit Led dimmer + * + * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf + * + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/input.h> +#include <linux/mutex.h> +#include <linux/leds-pca9532.h> + +static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END}; +I2C_CLIENT_INSMOD_1(pca9532); + +#define PCA9532_REG_PSC(i) (0x2+(i)*2) +#define PCA9532_REG_PWM(i) (0x3+(i)*2) +#define PCA9532_REG_LS0 0x6 +#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0) +#define LED_NUM(led) (led & 0x3) + +#define ldev_to_led(c) container_of(c, struct pca9532_led, ldev) + +struct pca9532_data { + struct i2c_client *client; + struct pca9532_led leds[16]; + struct mutex update_lock; + struct input_dev *idev; + u8 pwm[2]; + u8 psc[2]; +}; + +static int pca9532_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int pca9532_remove(struct i2c_client *client); + +static const struct i2c_device_id pca9532_id[] = { + { "pca9532", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, pca9532_id); + +static struct i2c_driver pca9532_driver = { + .driver = { + .name = "pca9532", + }, + .probe = pca9532_probe, + .remove = pca9532_remove, + .id_table = pca9532_id, +}; + +/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly, + * the clever Thecus people are using one pwm to drive the beeper. So, + * as a compromise we average one pwm to the values requested by all + * leds that are not ON/OFF. + * */ +static int pca9532_setpwm(struct i2c_client *client, int pwm, int blink, + enum led_brightness value) +{ + int a = 0, b = 0, i = 0; + struct pca9532_data *data = i2c_get_clientdata(client); + for (i = 0; i < 16; i++) { + if (data->leds[i].type == PCA9532_TYPE_LED && + data->leds[i].state == PCA9532_PWM0+pwm) { + a++; + b += data->leds[i].ldev.brightness; + } + } + if (a == 0) { + dev_err(&client->dev, + "fear of division by zero %d/%d, wanted %d\n", + b, a, value); + return -EINVAL; + } + b = b/a; + if (b > 0xFF) + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm[pwm] = b; + i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm), + data->pwm[pwm]); + data->psc[pwm] = blink; + i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm), + data->psc[pwm]); + mutex_unlock(&data->update_lock); + return 0; +} + +/* Set LED routing */ +static void pca9532_setled(struct pca9532_led *led) +{ + struct i2c_client *client = led->client; + struct pca9532_data *data = i2c_get_clientdata(client); + char reg; + + mutex_lock(&data->update_lock); + reg = i2c_smbus_read_byte_data(client, LED_REG(led->id)); + /* zero led bits */ + reg = reg & ~(0x3<<LED_NUM(led->id)*2); + /* set the new value */ + reg = reg | (led->state << LED_NUM(led->id)*2); + i2c_smbus_write_byte_data(client, LED_REG(led->id), reg); + mutex_unlock(&data->update_lock); +} + +static void pca9532_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + int err = 0; + struct pca9532_led *led = ldev_to_led(led_cdev); + + if (value == LED_OFF) + led->state = PCA9532_OFF; + else if (value == LED_FULL) + led->state = PCA9532_ON; + else { + led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */ + err = pca9532_setpwm(led->client, 0, 0, value); + if (err) + return; /* XXX: led api doesn't allow error code? */ + } + pca9532_setled(led); +} + +static int pca9532_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct pca9532_led *led = ldev_to_led(led_cdev); + struct i2c_client *client = led->client; + int psc; + + if (*delay_on == 0 && *delay_off == 0) { + /* led subsystem ask us for a blink rate */ + *delay_on = 1000; + *delay_off = 1000; + } + if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6) + return -EINVAL; + + /* Thecus specific: only use PSC/PWM 0 */ + psc = (*delay_on * 152-1)/1000; + return pca9532_setpwm(client, 0, psc, led_cdev->brightness); +} + +int pca9532_event(struct input_dev *dev, unsigned int type, unsigned int code, + int value) +{ + struct pca9532_data *data = input_get_drvdata(dev); + + if (type != EV_SND && (code != SND_BELL || code != SND_TONE)) + return -1; + + /* XXX: allow different kind of beeps with psc/pwm modifications */ + if (value > 1 && value < 32767) + data->pwm[1] = 127; + else + data->pwm[1] = 0; + + dev_info(&dev->dev, "setting beep to %d \n", data->pwm[1]); + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1), + data->pwm[1]); + mutex_unlock(&data->update_lock); + + return 0; +} + +static int pca9532_configure(struct i2c_client *client, + struct pca9532_data *data, struct pca9532_platform_data *pdata) +{ + int i, err = 0; + + for (i = 0; i < 2; i++) { + data->pwm[i] = pdata->pwm[i]; + data->psc[i] = pdata->psc[i]; + i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i), + data->pwm[i]); + i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i), + data->psc[i]); + } + + for (i = 0; i < 16; i++) { + struct pca9532_led *led = &data->leds[i]; + struct pca9532_led *pled = &pdata->leds[i]; + led->client = client; + led->id = i; + led->type = pled->type; + switch (led->type) { + case PCA9532_TYPE_NONE: + break; + case PCA9532_TYPE_LED: + led->state = pled->state; + led->name = pled->name; + led->ldev.name = led->name; + led->ldev.brightness = LED_OFF; + led->ldev.brightness_set = pca9532_set_brightness; + led->ldev.blink_set = pca9532_set_blink; + if (led_classdev_register(&client->dev, + &led->ldev) < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led->name); + goto exit; + } + pca9532_setled(led); + break; + case PCA9532_TYPE_N2100_BEEP: + BUG_ON(data->idev); + led->state = PCA9532_PWM1; + pca9532_setled(led); + data->idev = input_allocate_device(); + if (data->idev == NULL) { + err = -ENOMEM; + goto exit; + } + data->idev->name = pled->name; + data->idev->phys = "i2c/pca9532"; + data->idev->id.bustype = BUS_HOST; + data->idev->id.vendor = 0x001f; + data->idev->id.product = 0x0001; + data->idev->id.version = 0x0100; + data->idev->evbit[0] = BIT_MASK(EV_SND); + data->idev->sndbit[0] = BIT_MASK(SND_BELL) | + BIT_MASK(SND_TONE); + data->idev->event = pca9532_event; + input_set_drvdata(data->idev, data); + err = input_register_device(data->idev); + if (err) { + input_free_device(data->idev); + data->idev = NULL; + goto exit; + } + break; + } + } + return 0; + +exit: + if (i > 0) + for (i = i - 1; i >= 0; i--) + switch (data->leds[i].type) { + case PCA9532_TYPE_NONE: + break; + case PCA9532_TYPE_LED: + led_classdev_unregister(&data->leds[i].ldev); + break; + case PCA9532_TYPE_N2100_BEEP: + if (data->idev != NULL) { + input_unregister_device(data->idev); + input_free_device(data->idev); + data->idev = NULL; + } + break; + } + + return err; + +} + +static int pca9532_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pca9532_data *data = i2c_get_clientdata(client); + struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct pca9532_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + dev_info(&client->dev, "setting platform data\n"); + i2c_set_clientdata(client, data); + data->client = client; + mutex_init(&data->update_lock); + + if (pca9532_pdata == NULL) + return -EIO; + + pca9532_configure(client, data, pca9532_pdata); + return 0; + +} + +static int pca9532_remove(struct i2c_client *client) +{ + struct pca9532_data *data = i2c_get_clientdata(client); + int i; + for (i = 0; i < 16; i++) + switch (data->leds[i].type) { + case PCA9532_TYPE_NONE: + break; + case PCA9532_TYPE_LED: + led_classdev_unregister(&data->leds[i].ldev); + break; + case PCA9532_TYPE_N2100_BEEP: + if (data->idev != NULL) { + input_unregister_device(data->idev); + input_free_device(data->idev); + data->idev = NULL; + } + break; + } + + kfree(data); + i2c_set_clientdata(client, NULL); + return 0; +} + +static int __init pca9532_init(void) +{ + return i2c_add_driver(&pca9532_driver); +} + +static void __exit pca9532_exit(void) +{ + i2c_del_driver(&pca9532_driver); +} + +MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCA 9532 LED dimmer"); + +module_init(pca9532_init); +module_exit(pca9532_exit); + diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c new file mode 100644 index 00000000000..146c0697286 --- /dev/null +++ b/drivers/leds/leds-pca955x.c @@ -0,0 +1,384 @@ +/* + * Copyright 2007-2008 Extreme Engineering Solutions, Inc. + * + * Author: Nate Case <ncase@xes-inc.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * LED driver for various PCA955x I2C LED drivers + * + * Supported devices: + * + * Device Description 7-bit slave address + * ------ ----------- ------------------- + * PCA9550 2-bit driver 0x60 .. 0x61 + * PCA9551 8-bit driver 0x60 .. 0x67 + * PCA9552 16-bit driver 0x60 .. 0x67 + * PCA9553/01 4-bit driver 0x62 + * PCA9553/02 4-bit driver 0x63 + * + * Philips PCA955x LED driver chips follow a register map as shown below: + * + * Control Register Description + * ---------------- ----------- + * 0x0 Input register 0 + * .. + * NUM_INPUT_REGS - 1 Last Input register X + * + * NUM_INPUT_REGS Frequency prescaler 0 + * NUM_INPUT_REGS + 1 PWM register 0 + * NUM_INPUT_REGS + 2 Frequency prescaler 1 + * NUM_INPUT_REGS + 3 PWM register 1 + * + * NUM_INPUT_REGS + 4 LED selector 0 + * NUM_INPUT_REGS + 4 + * + NUM_LED_REGS - 1 Last LED selector + * + * where NUM_INPUT_REGS and NUM_LED_REGS vary depending on how many + * bits the chip supports. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/leds.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> + +/* LED select registers determine the source that drives LED outputs */ +#define PCA955X_LS_LED_ON 0x0 /* Output LOW */ +#define PCA955X_LS_LED_OFF 0x1 /* Output HI-Z */ +#define PCA955X_LS_BLINK0 0x2 /* Blink at PWM0 rate */ +#define PCA955X_LS_BLINK1 0x3 /* Blink at PWM1 rate */ + +enum pca955x_type { + pca9550, + pca9551, + pca9552, + pca9553, +}; + +struct pca955x_chipdef { + int bits; + u8 slv_addr; /* 7-bit slave address mask */ + int slv_addr_shift; /* Number of bits to ignore */ +}; + +static struct pca955x_chipdef pca955x_chipdefs[] = { + [pca9550] = { + .bits = 2, + .slv_addr = /* 110000x */ 0x60, + .slv_addr_shift = 1, + }, + [pca9551] = { + .bits = 8, + .slv_addr = /* 1100xxx */ 0x60, + .slv_addr_shift = 3, + }, + [pca9552] = { + .bits = 16, + .slv_addr = /* 1100xxx */ 0x60, + .slv_addr_shift = 3, + }, + [pca9553] = { + .bits = 4, + .slv_addr = /* 110001x */ 0x62, + .slv_addr_shift = 1, + }, +}; + +static const struct i2c_device_id pca955x_id[] = { + { "pca9550", pca9550 }, + { "pca9551", pca9551 }, + { "pca9552", pca9552 }, + { "pca9553", pca9553 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pca955x_id); + +struct pca955x_led { + struct pca955x_chipdef *chipdef; + struct i2c_client *client; + struct work_struct work; + spinlock_t lock; + enum led_brightness brightness; + struct led_classdev led_cdev; + int led_num; /* 0 .. 15 potentially */ + char name[32]; +}; + +/* 8 bits per input register */ +static inline int pca95xx_num_input_regs(int bits) +{ + return (bits + 7) / 8; +} + +/* 4 bits per LED selector register */ +static inline int pca95xx_num_led_regs(int bits) +{ + return (bits + 3) / 4; +} + +/* + * Return an LED selector register value based on an existing one, with + * the appropriate 2-bit state value set for the given LED number (0-3). + */ +static inline u8 pca955x_ledsel(u8 oldval, int led_num, int state) +{ + return (oldval & (~(0x3 << (led_num << 1)))) | + ((state & 0x3) << (led_num << 1)); +} + +/* + * Write to frequency prescaler register, used to program the + * period of the PWM output. period = (PSCx + 1) / 38 + */ +static void pca955x_write_psc(struct i2c_client *client, int n, u8 val) +{ + struct pca955x_led *pca955x = i2c_get_clientdata(client); + + i2c_smbus_write_byte_data(client, + pca95xx_num_input_regs(pca955x->chipdef->bits) + 2*n, + val); +} + +/* + * Write to PWM register, which determines the duty cycle of the + * output. LED is OFF when the count is less than the value of this + * register, and ON when it is greater. If PWMx == 0, LED is always OFF. + * + * Duty cycle is (256 - PWMx) / 256 + */ +static void pca955x_write_pwm(struct i2c_client *client, int n, u8 val) +{ + struct pca955x_led *pca955x = i2c_get_clientdata(client); + + i2c_smbus_write_byte_data(client, + pca95xx_num_input_regs(pca955x->chipdef->bits) + 1 + 2*n, + val); +} + +/* + * Write to LED selector register, which determines the source that + * drives the LED output. + */ +static void pca955x_write_ls(struct i2c_client *client, int n, u8 val) +{ + struct pca955x_led *pca955x = i2c_get_clientdata(client); + + i2c_smbus_write_byte_data(client, + pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n, + val); +} + +/* + * Read the LED selector register, which determines the source that + * drives the LED output. + */ +static u8 pca955x_read_ls(struct i2c_client *client, int n) +{ + struct pca955x_led *pca955x = i2c_get_clientdata(client); + + return (u8) i2c_smbus_read_byte_data(client, + pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n); +} + +static void pca955x_led_work(struct work_struct *work) +{ + struct pca955x_led *pca955x; + u8 ls; + int chip_ls; /* which LSx to use (0-3 potentially) */ + int ls_led; /* which set of bits within LSx to use (0-3) */ + + pca955x = container_of(work, struct pca955x_led, work); + chip_ls = pca955x->led_num / 4; + ls_led = pca955x->led_num % 4; + + ls = pca955x_read_ls(pca955x->client, chip_ls); + + switch (pca955x->brightness) { + case LED_FULL: + ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_ON); + break; + case LED_OFF: + ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_OFF); + break; + case LED_HALF: + ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_BLINK0); + break; + default: + /* + * Use PWM1 for all other values. This has the unwanted + * side effect of making all LEDs on the chip share the + * same brightness level if set to a value other than + * OFF, HALF, or FULL. But, this is probably better than + * just turning off for all other values. + */ + pca955x_write_pwm(pca955x->client, 1, 255-pca955x->brightness); + ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_BLINK1); + break; + } + + pca955x_write_ls(pca955x->client, chip_ls, ls); +} + +void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value) +{ + struct pca955x_led *pca955x; + + pca955x = container_of(led_cdev, struct pca955x_led, led_cdev); + + spin_lock(&pca955x->lock); + pca955x->brightness = value; + + /* + * Must use workqueue for the actual I/O since I2C operations + * can sleep. + */ + schedule_work(&pca955x->work); + + spin_unlock(&pca955x->lock); +} + +static int __devinit pca955x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pca955x_led *pca955x; + int i; + int err = -ENODEV; + struct pca955x_chipdef *chip; + struct i2c_adapter *adapter; + struct led_platform_data *pdata; + + chip = &pca955x_chipdefs[id->driver_data]; + adapter = to_i2c_adapter(client->dev.parent); + pdata = client->dev.platform_data; + + /* Make sure the slave address / chip type combo given is possible */ + if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) != + chip->slv_addr) { + dev_err(&client->dev, "invalid slave address %02x\n", + client->addr); + return -ENODEV; + } + + printk(KERN_INFO "leds-pca955x: Using %s %d-bit LED driver at " + "slave address 0x%02x\n", + id->name, chip->bits, client->addr); + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) + return -EIO; + + if (pdata) { + if (pdata->num_leds != chip->bits) { + dev_err(&client->dev, "board info claims %d LEDs" + " on a %d-bit chip\n", + pdata->num_leds, chip->bits); + return -ENODEV; + } + } + + for (i = 0; i < chip->bits; i++) { + pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL); + if (!pca955x) { + err = -ENOMEM; + goto exit; + } + + pca955x->chipdef = chip; + pca955x->client = client; + pca955x->led_num = i; + /* Platform data can specify LED names and default triggers */ + if (pdata) { + if (pdata->leds[i].name) + snprintf(pca955x->name, 32, "pca955x:%s", + pdata->leds[i].name); + if (pdata->leds[i].default_trigger) + pca955x->led_cdev.default_trigger = + pdata->leds[i].default_trigger; + } else { + snprintf(pca955x->name, 32, "pca955x:%d", i); + } + spin_lock_init(&pca955x->lock); + + pca955x->led_cdev.name = pca955x->name; + pca955x->led_cdev.brightness_set = + pca955x_led_set; + + /* + * Client data is a pointer to the _first_ pca955x_led + * struct + */ + if (i == 0) + i2c_set_clientdata(client, pca955x); + + INIT_WORK(&(pca955x->work), pca955x_led_work); + + led_classdev_register(&client->dev, &(pca955x->led_cdev)); + } + + /* Turn off LEDs */ + for (i = 0; i < pca95xx_num_led_regs(chip->bits); i++) + pca955x_write_ls(client, i, 0x55); + + /* PWM0 is used for half brightness or 50% duty cycle */ + pca955x_write_pwm(client, 0, 255-LED_HALF); + + /* PWM1 is used for variable brightness, default to OFF */ + pca955x_write_pwm(client, 1, 0); + + /* Set to fast frequency so we do not see flashing */ + pca955x_write_psc(client, 0, 0); + pca955x_write_psc(client, 1, 0); + + return 0; +exit: + return err; +} + +static int __devexit pca955x_remove(struct i2c_client *client) +{ + struct pca955x_led *pca955x = i2c_get_clientdata(client); + int leds = pca955x->chipdef->bits; + int i; + + for (i = 0; i < leds; i++) { + led_classdev_unregister(&(pca955x->led_cdev)); + cancel_work_sync(&(pca955x->work)); + kfree(pca955x); + pca955x = pca955x + 1; + } + + return 0; +} + +static struct i2c_driver pca955x_driver = { + .driver = { + .name = "leds-pca955x", + .owner = THIS_MODULE, + }, + .probe = pca955x_probe, + .remove = __devexit_p(pca955x_remove), + .id_table = pca955x_id, +}; + +static int __init pca955x_leds_init(void) +{ + return i2c_add_driver(&pca955x_driver); +} + +static void __exit pca955x_leds_exit(void) +{ + i2c_del_driver(&pca955x_driver); +} + +module_init(pca955x_leds_init); +module_exit(pca955x_leds_exit); + +MODULE_AUTHOR("Nate Case <ncase@xes-inc.com>"); +MODULE_DESCRIPTION("PCA955x LED driver"); +MODULE_LICENSE("GPL v2"); |