diff options
Diffstat (limited to 'drivers/macintosh/via-pmu.c')
| -rw-r--r-- | drivers/macintosh/via-pmu.c | 664 |
1 files changed, 175 insertions, 489 deletions
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 6123c70153d..82ec12e0edd 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -10,13 +10,11 @@ * * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi. * Copyright (C) 2001-2002 Benjamin Herrenschmidt + * Copyright (C) 2006-2007 Johannes Berg * * THIS DRIVER IS BECOMING A TOTAL MESS ! * - Cleanup atomically disabling reply to PMU events after * a sleep or a freq. switch - * - Move sleep code out of here to pmac_pm, merge into new - * common PM infrastructure - * - Save/Restore PCI space properly * */ #include <stdarg.h> @@ -33,7 +31,6 @@ #include <linux/adb.h> #include <linux/pmu.h> #include <linux/cuda.h> -#include <linux/smp_lock.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/pm.h> @@ -65,9 +62,7 @@ #include "via-pmu-event.h" /* Some compile options */ -#undef SUSPEND_USES_PMU -#define DEBUG_SLEEP -#undef HACKED_PCI_SAVE +#undef DEBUG_SLEEP /* Misc minor number allocated for /dev/pmu */ #define PMU_MINOR 154 @@ -152,12 +147,9 @@ static spinlock_t pmu_lock; static u8 pmu_intr_mask; static int pmu_version; static int drop_interrupts; -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) static int option_lid_wakeup = 1; -#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ -#if (defined(CONFIG_PM_SLEEP)&&defined(CONFIG_PPC32))||defined(CONFIG_PMAC_BACKLIGHT_LEGACY) -static int sleep_in_progress; -#endif +#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ static unsigned long async_req_locks; static unsigned int pmu_irq_stats[11]; @@ -177,7 +169,6 @@ static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES]; int __fake_sleep; int asleep; -BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); #ifdef CONFIG_ADB static int adb_dev_map; @@ -224,7 +215,7 @@ extern void enable_kernel_fp(void); #ifdef DEBUG_SLEEP int pmu_polled_request(struct adb_request *req); -int pmu_wink(struct adb_request *req); +void pmu_blink(int n); #endif /* @@ -875,7 +866,7 @@ proc_read_options(char *page, char **start, off_t off, { char *p = page; -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) if (pmu_kind == PMU_KEYLARGO_BASED && pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0) p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup); @@ -916,7 +907,7 @@ proc_write_options(struct file *file, const char __user *buffer, *(val++) = 0; while(*val == ' ') val++; -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) if (pmu_kind == PMU_KEYLARGO_BASED && pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0) if (!strcmp(label, "lid_wakeup")) @@ -1256,9 +1247,7 @@ void pmu_suspend(void) { unsigned long flags; -#ifdef SUSPEND_USES_PMU - struct adb_request *req; -#endif + if (!via) return; @@ -1276,17 +1265,10 @@ pmu_suspend(void) via_pmu_interrupt(0, NULL); spin_lock_irqsave(&pmu_lock, flags); if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) { -#ifdef SUSPEND_USES_PMU - pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0); - spin_unlock_irqrestore(&pmu_lock, flags); - while(!req.complete) - pmu_poll(); -#else /* SUSPEND_USES_PMU */ if (gpio_irq >= 0) disable_irq_nosync(gpio_irq); out_8(&via[IER], CB1_INT | IER_CLR); spin_unlock_irqrestore(&pmu_lock, flags); -#endif /* SUSPEND_USES_PMU */ break; } } while (1); @@ -1307,18 +1289,11 @@ pmu_resume(void) return; } adb_int_pending = 1; -#ifdef SUSPEND_USES_PMU - pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); - spin_unlock_irqrestore(&pmu_lock, flags); - while(!req.complete) - pmu_poll(); -#else /* SUSPEND_USES_PMU */ if (gpio_irq >= 0) enable_irq(gpio_irq); out_8(&via[IER], CB1_INT | IER_SET); spin_unlock_irqrestore(&pmu_lock, flags); pmu_poll(); -#endif /* SUSPEND_USES_PMU */ } /* Interrupt data could be the result data from an ADB cmd */ @@ -1738,228 +1713,7 @@ pmu_present(void) return via != 0; } -#ifdef CONFIG_PM_SLEEP - -static LIST_HEAD(sleep_notifiers); - -int -pmu_register_sleep_notifier(struct pmu_sleep_notifier *n) -{ - struct list_head *list; - struct pmu_sleep_notifier *notifier; - - for (list = sleep_notifiers.next; list != &sleep_notifiers; - list = list->next) { - notifier = list_entry(list, struct pmu_sleep_notifier, list); - if (n->priority > notifier->priority) - break; - } - __list_add(&n->list, list->prev, list); - return 0; -} -EXPORT_SYMBOL(pmu_register_sleep_notifier); - -int -pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n) -{ - if (n->list.next == 0) - return -ENOENT; - list_del(&n->list); - n->list.next = NULL; - return 0; -} -EXPORT_SYMBOL(pmu_unregister_sleep_notifier); -#endif /* CONFIG_PM_SLEEP */ - -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) - -/* Sleep is broadcast last-to-first */ -static void broadcast_sleep(int when) -{ - struct list_head *list; - struct pmu_sleep_notifier *notifier; - - for (list = sleep_notifiers.prev; list != &sleep_notifiers; - list = list->prev) { - notifier = list_entry(list, struct pmu_sleep_notifier, list); - notifier->notifier_call(notifier, when); - } -} - -/* Wake is broadcast first-to-last */ -static void broadcast_wake(void) -{ - struct list_head *list; - struct pmu_sleep_notifier *notifier; - - for (list = sleep_notifiers.next; list != &sleep_notifiers; - list = list->next) { - notifier = list_entry(list, struct pmu_sleep_notifier, list); - notifier->notifier_call(notifier, PBOOK_WAKE); - } -} - -/* - * This struct is used to store config register values for - * PCI devices which may get powered off when we sleep. - */ -static struct pci_save { -#ifndef HACKED_PCI_SAVE - u16 command; - u16 cache_lat; - u16 intr; - u32 rom_address; -#else - u32 config[16]; -#endif -} *pbook_pci_saves; -static int pbook_npci_saves; - -static void -pbook_alloc_pci_save(void) -{ - int npci; - struct pci_dev *pd = NULL; - - npci = 0; - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { - ++npci; - } - if (npci == 0) - return; - pbook_pci_saves = (struct pci_save *) - kmalloc(npci * sizeof(struct pci_save), GFP_KERNEL); - pbook_npci_saves = npci; -} - -static void -pbook_free_pci_save(void) -{ - if (pbook_pci_saves == NULL) - return; - kfree(pbook_pci_saves); - pbook_pci_saves = NULL; - pbook_npci_saves = 0; -} - -static void -pbook_pci_save(void) -{ - struct pci_save *ps = pbook_pci_saves; - struct pci_dev *pd = NULL; - int npci = pbook_npci_saves; - - if (ps == NULL) - return; - - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { - if (npci-- == 0) { - pci_dev_put(pd); - return; - } -#ifndef HACKED_PCI_SAVE - pci_read_config_word(pd, PCI_COMMAND, &ps->command); - pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat); - pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr); - pci_read_config_dword(pd, PCI_ROM_ADDRESS, &ps->rom_address); -#else - int i; - for (i=1;i<16;i++) - pci_read_config_dword(pd, i<<4, &ps->config[i]); -#endif - ++ps; - } -} - -/* For this to work, we must take care of a few things: If gmac was enabled - * during boot, it will be in the pci dev list. If it's disabled at this point - * (and it will probably be), then you can't access it's config space. - */ -static void -pbook_pci_restore(void) -{ - u16 cmd; - struct pci_save *ps = pbook_pci_saves - 1; - struct pci_dev *pd = NULL; - int npci = pbook_npci_saves; - int j; - - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { -#ifdef HACKED_PCI_SAVE - int i; - if (npci-- == 0) { - pci_dev_put(pd); - return; - } - ps++; - for (i=2;i<16;i++) - pci_write_config_dword(pd, i<<4, ps->config[i]); - pci_write_config_dword(pd, 4, ps->config[1]); -#else - if (npci-- == 0) - return; - ps++; - if (ps->command == 0) - continue; - pci_read_config_word(pd, PCI_COMMAND, &cmd); - if ((ps->command & ~cmd) == 0) - continue; - switch (pd->hdr_type) { - case PCI_HEADER_TYPE_NORMAL: - for (j = 0; j < 6; ++j) - pci_write_config_dword(pd, - PCI_BASE_ADDRESS_0 + j*4, - pd->resource[j].start); - pci_write_config_dword(pd, PCI_ROM_ADDRESS, - ps->rom_address); - pci_write_config_word(pd, PCI_CACHE_LINE_SIZE, - ps->cache_lat); - pci_write_config_word(pd, PCI_INTERRUPT_LINE, - ps->intr); - pci_write_config_word(pd, PCI_COMMAND, ps->command); - break; - } -#endif - } -} - -#ifdef DEBUG_SLEEP -/* N.B. This doesn't work on the 3400 */ -void -pmu_blink(int n) -{ - struct adb_request req; - - memset(&req, 0, sizeof(req)); - - for (; n > 0; --n) { - req.nbytes = 4; - req.done = NULL; - req.data[0] = 0xee; - req.data[1] = 4; - req.data[2] = 0; - req.data[3] = 1; - req.reply[0] = ADB_RET_OK; - req.reply_len = 1; - req.reply_expected = 0; - pmu_polled_request(&req); - mdelay(50); - req.nbytes = 4; - req.done = NULL; - req.data[0] = 0xee; - req.data[1] = 4; - req.data[2] = 0; - req.data[3] = 0; - req.reply[0] = ADB_RET_OK; - req.reply_len = 1; - req.reply_expected = 0; - pmu_polled_request(&req); - mdelay(50); - } - mdelay(50); -} -#endif - +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) /* * Put the powerbook to sleep. */ @@ -1994,134 +1748,6 @@ restore_via_state(void) out_8(&via[IER], IER_SET | SR_INT | CB1_INT); } -extern void pmu_backlight_set_sleep(int sleep); - -static int -pmac_suspend_devices(void) -{ - int ret; - - pm_prepare_console(); - - /* Notify old-style device drivers */ - broadcast_sleep(PBOOK_SLEEP_REQUEST); - - /* Sync the disks. */ - /* XXX It would be nice to have some way to ensure that - * nobody is dirtying any new buffers while we wait. That - * could be achieved using the refrigerator for processes - * that swsusp uses - */ - sys_sync(); - - broadcast_sleep(PBOOK_SLEEP_NOW); - - /* Send suspend call to devices, hold the device core's dpm_sem */ - ret = device_suspend(PMSG_SUSPEND); - if (ret) { - broadcast_wake(); - printk(KERN_ERR "Driver sleep failed\n"); - return -EBUSY; - } - -#ifdef CONFIG_PMAC_BACKLIGHT - /* Tell backlight code not to muck around with the chip anymore */ - pmu_backlight_set_sleep(1); -#endif - - /* Call platform functions marked "on sleep" */ - pmac_pfunc_i2c_suspend(); - pmac_pfunc_base_suspend(); - - /* Stop preemption */ - preempt_disable(); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occurring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE. This code of course works properly only - * on UP machines... For SMP, if we ever implement sleep, we'll have to - * stop the "other" CPUs way before we do all that stuff. - */ - local_irq_disable(); - - /* Broadcast power down irq - * This isn't that useful in most cases (only directly wired devices can - * use this but still... This will take care of sysdev's as well, so - * we exit from here with local irqs disabled and PIC off. - */ - ret = device_power_down(PMSG_SUSPEND); - if (ret) { - wakeup_decrementer(); - local_irq_enable(); - preempt_enable(); - device_resume(); - broadcast_wake(); - printk(KERN_ERR "Driver powerdown failed\n"); - return -EBUSY; - } - - /* Wait for completion of async requests */ - while (!batt_req.complete) - pmu_poll(); - - /* Giveup the lazy FPU & vec so we don't have to back them - * up from the low level code - */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - return 0; -} - -static int -pmac_wakeup_devices(void) -{ - mdelay(100); - -#ifdef CONFIG_PMAC_BACKLIGHT - /* Tell backlight code it can use the chip again */ - pmu_backlight_set_sleep(0); -#endif - - /* Power back up system devices (including the PIC) */ - device_power_up(); - - /* Force a poll of ADB interrupts */ - adb_int_pending = 1; - via_pmu_interrupt(0, NULL); - - /* Restart jiffies & scheduling */ - wakeup_decrementer(); - - /* Re-enable local CPU interrupts */ - local_irq_enable(); - mdelay(10); - preempt_enable(); - - /* Call platform functions marked "on wake" */ - pmac_pfunc_base_resume(); - pmac_pfunc_i2c_resume(); - - /* Resume devices */ - device_resume(); - - /* Notify old style drivers */ - broadcast_wake(); - - pm_restore_console(); - - return 0; -} - #define GRACKLE_PM (1<<7) #define GRACKLE_DOZE (1<<5) #define GRACKLE_NAP (1<<4) @@ -2132,19 +1758,12 @@ static int powerbook_sleep_grackle(void) unsigned long save_l2cr; unsigned short pmcr1; struct adb_request req; - int ret; struct pci_dev *grackle; grackle = pci_get_bus_and_slot(0, 0); if (!grackle) return -ENODEV; - ret = pmac_suspend_devices(); - if (ret) { - printk(KERN_ERR "Sleep rejected by devices\n"); - return ret; - } - /* Turn off various things. Darwin does some retry tests here... */ pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE); pmu_wait_complete(&req); @@ -2207,8 +1826,6 @@ static int powerbook_sleep_grackle(void) PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY); pmu_wait_complete(&req); - pmac_wakeup_devices(); - return 0; } @@ -2218,7 +1835,6 @@ powerbook_sleep_Core99(void) unsigned long save_l2cr; unsigned long save_l3cr; struct adb_request req; - int ret; if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) { printk(KERN_ERR "Sleep mode not supported on this machine\n"); @@ -2228,12 +1844,6 @@ powerbook_sleep_Core99(void) if (num_online_cpus() > 1 || cpu_is_offline(0)) return -EAGAIN; - ret = pmac_suspend_devices(); - if (ret) { - printk(KERN_ERR "Sleep rejected by devices\n"); - return ret; - } - /* Stop environment and ADB interrupts */ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0); pmu_wait_complete(&req); @@ -2304,45 +1914,33 @@ powerbook_sleep_Core99(void) /* Restore LPJ, cpufreq will adjust the cpu frequency */ loops_per_jiffy /= 2; - pmac_wakeup_devices(); - return 0; } #define PB3400_MEM_CTRL 0xf8000000 #define PB3400_MEM_CTRL_SLEEP 0x70 -static int -powerbook_sleep_3400(void) +static void __iomem *pb3400_mem_ctrl; + +static void powerbook_sleep_init_3400(void) +{ + /* map in the memory controller registers */ + pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100); + if (pb3400_mem_ctrl == NULL) + printk(KERN_WARNING "ioremap failed: sleep won't be possible"); +} + +static int powerbook_sleep_3400(void) { - int ret, i, x; + int i, x; unsigned int hid0; - unsigned long p; + unsigned long msr; struct adb_request sleep_req; - void __iomem *mem_ctrl; unsigned int __iomem *mem_ctrl_sleep; - /* first map in the memory controller registers */ - mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100); - if (mem_ctrl == NULL) { - printk("powerbook_sleep_3400: ioremap failed\n"); + if (pb3400_mem_ctrl == NULL) return -ENOMEM; - } - mem_ctrl_sleep = mem_ctrl + PB3400_MEM_CTRL_SLEEP; - - /* Allocate room for PCI save */ - pbook_alloc_pci_save(); - - ret = pmac_suspend_devices(); - if (ret) { - pbook_free_pci_save(); - iounmap(mem_ctrl); - printk(KERN_ERR "Sleep rejected by devices\n"); - return ret; - } - - /* Save the state of PCI config space for some slots */ - pbook_pci_save(); + mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP; /* Set the memory controller to keep the memory refreshed while we're asleep */ @@ -2357,41 +1955,34 @@ powerbook_sleep_3400(void) /* Ask the PMU to put us to sleep */ pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T'); - while (!sleep_req.complete) - mb(); + pmu_wait_complete(&sleep_req); + pmu_unlock(); - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1); + pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1); - /* displacement-flush the L2 cache - necessary? */ - for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000) - i = *(volatile int *)p; asleep = 1; /* Put the CPU into sleep mode */ hid0 = mfspr(SPRN_HID0); hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP; mtspr(SPRN_HID0, hid0); - mtmsr(mfmsr() | MSR_POW | MSR_EE); - udelay(10); + local_irq_enable(); + msr = mfmsr() | MSR_POW; + while (asleep) { + mb(); + mtmsr(msr); + isync(); + } + local_irq_disable(); /* OK, we're awake again, start restoring things */ out_be32(mem_ctrl_sleep, 0x3f); - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0); - pbook_pci_restore(); - pmu_unlock(); - - /* wait for the PMU interrupt sequence to complete */ - while (asleep) - mb(); - - pmac_wakeup_devices(); - pbook_free_pci_save(); - iounmap(mem_ctrl); + pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0); return 0; } -#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ +#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ /* * Support for /dev/pmu device @@ -2548,7 +2139,6 @@ pmu_release(struct inode *inode, struct file *file) struct pmu_private *pp = file->private_data; unsigned long flags; - lock_kernel(); if (pp != 0) { file->private_data = NULL; spin_lock_irqsave(&all_pvt_lock, flags); @@ -2562,10 +2152,96 @@ pmu_release(struct inode *inode, struct file *file) kfree(pp); } - unlock_kernel(); return 0; } +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) +static void pmac_suspend_disable_irqs(void) +{ + /* Call platform functions marked "on sleep" */ + pmac_pfunc_i2c_suspend(); + pmac_pfunc_base_suspend(); +} + +static int powerbook_sleep(suspend_state_t state) +{ + int error = 0; + + /* Wait for completion of async requests */ + while (!batt_req.complete) + pmu_poll(); + + /* Giveup the lazy FPU & vec so we don't have to back them + * up from the low level code + */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + switch (pmu_kind) { + case PMU_OHARE_BASED: + error = powerbook_sleep_3400(); + break; + case PMU_HEATHROW_BASED: + case PMU_PADDINGTON_BASED: + error = powerbook_sleep_grackle(); + break; + case PMU_KEYLARGO_BASED: + error = powerbook_sleep_Core99(); + break; + default: + return -ENOSYS; + } + + if (error) + return error; + + mdelay(100); + + return 0; +} + +static void pmac_suspend_enable_irqs(void) +{ + /* Force a poll of ADB interrupts */ + adb_int_pending = 1; + via_pmu_interrupt(0, NULL); + + mdelay(10); + + /* Call platform functions marked "on wake" */ + pmac_pfunc_base_resume(); + pmac_pfunc_i2c_resume(); +} + +static int pmu_sleep_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM + && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0); +} + +static struct platform_suspend_ops pmu_pm_ops = { + .enter = powerbook_sleep, + .valid = pmu_sleep_valid, +}; + +static int register_pmu_pm_ops(void) +{ + if (pmu_kind == PMU_OHARE_BASED) + powerbook_sleep_init_3400(); + ppc_md.suspend_disable_irqs = pmac_suspend_disable_irqs; + ppc_md.suspend_enable_irqs = pmac_suspend_enable_irqs; + suspend_set_ops(&pmu_pm_ops); + + return 0; +} + +device_initcall(register_pmu_pm_ops); +#endif + static int pmu_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) @@ -2574,35 +2250,15 @@ pmu_ioctl(struct inode * inode, struct file *filp, int error = -EINVAL; switch (cmd) { -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) case PMU_IOC_SLEEP: if (!capable(CAP_SYS_ADMIN)) return -EACCES; - if (sleep_in_progress) - return -EBUSY; - sleep_in_progress = 1; - switch (pmu_kind) { - case PMU_OHARE_BASED: - error = powerbook_sleep_3400(); - break; - case PMU_HEATHROW_BASED: - case PMU_PADDINGTON_BASED: - error = powerbook_sleep_grackle(); - break; - case PMU_KEYLARGO_BASED: - error = powerbook_sleep_Core99(); - break; - default: - error = -ENOSYS; - } - sleep_in_progress = 0; - break; + return pm_suspend(PM_SUSPEND_MEM); case PMU_IOC_CAN_SLEEP: - if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) + if (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) < 0) return put_user(0, argp); else return put_user(1, argp); -#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ #ifdef CONFIG_PMAC_BACKLIGHT_LEGACY /* Compatibility ioctl's for backlight */ @@ -2610,9 +2266,6 @@ pmu_ioctl(struct inode * inode, struct file *filp, { int brightness; - if (sleep_in_progress) - return -EBUSY; - brightness = pmac_backlight_get_legacy_brightness(); if (brightness < 0) return brightness; @@ -2624,9 +2277,6 @@ pmu_ioctl(struct inode * inode, struct file *filp, { int brightness; - if (sleep_in_progress) - return -EBUSY; - error = get_user(brightness, argp); if (error) return error; @@ -2751,15 +2401,43 @@ pmu_polled_request(struct adb_request *req) local_irq_restore(flags); return 0; } -#endif /* DEBUG_SLEEP */ +/* N.B. This doesn't work on the 3400 */ +void pmu_blink(int n) +{ + struct adb_request req; -/* FIXME: This is a temporary set of callbacks to enable us - * to do suspend-to-disk. - */ + memset(&req, 0, sizeof(req)); -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) + for (; n > 0; --n) { + req.nbytes = 4; + req.done = NULL; + req.data[0] = 0xee; + req.data[1] = 4; + req.data[2] = 0; + req.data[3] = 1; + req.reply[0] = ADB_RET_OK; + req.reply_len = 1; + req.reply_expected = 0; + pmu_polled_request(&req); + mdelay(50); + req.nbytes = 4; + req.done = NULL; + req.data[0] = 0xee; + req.data[1] = 4; + req.data[2] = 0; + req.data[3] = 0; + req.reply[0] = ADB_RET_OK; + req.reply_len = 1; + req.reply_expected = 0; + pmu_polled_request(&req); + mdelay(50); + } + mdelay(50); +} +#endif /* DEBUG_SLEEP */ +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) int pmu_sys_suspended; static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state) @@ -2767,10 +2445,15 @@ static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state) if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended) return 0; - /* Suspend PMU event interrupts */ + /* Suspend PMU event interrupts */\ pmu_suspend(); - pmu_sys_suspended = 1; + +#ifdef CONFIG_PMAC_BACKLIGHT + /* Tell backlight code not to muck around with the chip anymore */ + pmu_backlight_set_sleep(1); +#endif + return 0; } @@ -2785,15 +2468,18 @@ static int pmu_sys_resume(struct sys_device *sysdev) pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2); pmu_wait_complete(&req); +#ifdef CONFIG_PMAC_BACKLIGHT + /* Tell backlight code it can use the chip again */ + pmu_backlight_set_sleep(0); +#endif /* Resume PMU event interrupts */ pmu_resume(); - pmu_sys_suspended = 0; return 0; } -#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ +#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ static struct sysdev_class pmu_sysclass = { set_kset_name("pmu"), @@ -2804,10 +2490,10 @@ static struct sys_device device_pmu = { }; static struct sysdev_driver driver_pmu = { -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) .suspend = &pmu_sys_suspend, .resume = &pmu_sys_resume, -#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ +#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ }; static int __init init_pmu_sysfs(void) @@ -2842,10 +2528,10 @@ EXPORT_SYMBOL(pmu_wait_complete); EXPORT_SYMBOL(pmu_suspend); EXPORT_SYMBOL(pmu_resume); EXPORT_SYMBOL(pmu_unlock); -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32) +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) EXPORT_SYMBOL(pmu_enable_irled); EXPORT_SYMBOL(pmu_battery_count); EXPORT_SYMBOL(pmu_batteries); EXPORT_SYMBOL(pmu_power_flags); -#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ +#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */ |