diff options
Diffstat (limited to 'drivers/macintosh/via-pmu.c')
| -rw-r--r-- | drivers/macintosh/via-pmu.c | 87 |
1 files changed, 55 insertions, 32 deletions
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 56404350856..13881f19960 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -147,6 +147,7 @@ static struct device_node *vias; static int pmu_kind = PMU_UNKNOWN; static int pmu_fully_inited = 0; static int pmu_has_adb; +static struct device_node *gpio_node; static unsigned char __iomem *gpio_reg = NULL; static int gpio_irq = -1; static int gpio_irq_enabled = -1; @@ -295,22 +296,26 @@ static struct backlight_controller pmu_backlight_controller = { }; #endif /* CONFIG_PMAC_BACKLIGHT */ -int -find_via_pmu(void) +int __init find_via_pmu(void) { + phys_addr_t taddr; + u32 *reg; + if (via != 0) return 1; - vias = find_devices("via-pmu"); - if (vias == 0) + vias = of_find_node_by_name(NULL, "via-pmu"); + if (vias == NULL) return 0; - if (vias->next != 0) - printk(KERN_WARNING "Warning: only using 1st via-pmu\n"); - if (vias->n_addrs < 1 || vias->n_intrs < 1) { - printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n", - vias->n_addrs, vias->n_intrs); - if (vias->n_addrs < 1 || vias->n_intrs < 1) - return 0; + reg = (u32 *)get_property(vias, "reg", NULL); + if (reg == NULL) { + printk(KERN_ERR "via-pmu: No \"reg\" property !\n"); + goto fail; + } + taddr = of_translate_address(vias, reg); + if (taddr == 0) { + printk(KERN_ERR "via-pmu: Can't translate address !\n"); + goto fail; } spin_lock_init(&pmu_lock); @@ -331,7 +336,8 @@ find_via_pmu(void) pmu_kind = PMU_HEATHROW_BASED; else if (device_is_compatible(vias->parent, "Keylargo") || device_is_compatible(vias->parent, "K2-Keylargo")) { - struct device_node *gpio, *gpiop; + struct device_node *gpiop; + phys_addr_t gaddr = 0; pmu_kind = PMU_KEYLARGO_BASED; pmu_has_adb = (find_type_devices("adb") != NULL); @@ -341,19 +347,24 @@ find_via_pmu(void) PMU_INT_TICK | PMU_INT_ENVIRONMENT; - gpiop = find_devices("gpio"); - if (gpiop && gpiop->n_addrs) { - gpio_reg = ioremap(gpiop->addrs->address, 0x10); - gpio = find_devices("extint-gpio1"); - if (gpio == NULL) - gpio = find_devices("pmu-interrupt"); - if (gpio && gpio->parent == gpiop && gpio->n_intrs) - gpio_irq = gpio->intrs[0].line; + gpiop = of_find_node_by_name(NULL, "gpio"); + if (gpiop) { + reg = (u32 *)get_property(gpiop, "reg", NULL); + if (reg) + gaddr = of_translate_address(gpiop, reg); + if (gaddr != 0) + gpio_reg = ioremap(gaddr, 0x10); } + if (gpio_reg == NULL) + printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n"); } else pmu_kind = PMU_UNKNOWN; - via = ioremap(vias->addrs->address, 0x2000); + via = ioremap(taddr, 0x2000); + if (via == NULL) { + printk(KERN_ERR "via-pmu: Can't map address !\n"); + goto fail; + } out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */ out_8(&via[IFR], 0x7f); /* clear IFR */ @@ -371,17 +382,19 @@ find_via_pmu(void) sys_ctrler = SYS_CTRLER_PMU; return 1; + fail: + of_node_put(vias); + vias = NULL; + return 0; } #ifdef CONFIG_ADB -static int -pmu_probe(void) +static int pmu_probe(void) { return vias == NULL? -ENODEV: 0; } -static int __init -pmu_init(void) +static int __init pmu_init(void) { if (vias == NULL) return -ENODEV; @@ -405,7 +418,7 @@ static int __init via_pmu_start(void) bright_req_2.complete = 1; batt_req.complete = 1; -#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE) +#ifndef CONFIG_PPC_MERGE if (pmu_kind == PMU_KEYLARGO_BASED) openpic_set_irq_priority(vias->intrs[0].line, OPENPIC_PRIORITY_DEFAULT + 1); @@ -418,10 +431,22 @@ static int __init via_pmu_start(void) return -EAGAIN; } - if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) { - if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0)) - printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq); - gpio_irq_enabled = 1; + if (pmu_kind == PMU_KEYLARGO_BASED) { + gpio_node = of_find_node_by_name(NULL, "extint-gpio1"); + if (gpio_node == NULL) + gpio_node = of_find_node_by_name(NULL, + "pmu-interrupt"); + if (gpio_node && gpio_node->n_intrs > 0) + gpio_irq = gpio_node->intrs[0].line; + + if (gpio_irq != -1) { + if (request_irq(gpio_irq, gpio1_interrupt, 0, + "GPIO1 ADB", (void *)0)) + printk(KERN_ERR "pmu: can't get irq %d" + " (GPIO1)\n", gpio_irq); + else + gpio_irq_enabled = 1; + } } /* Enable interrupts */ @@ -1371,7 +1396,6 @@ next: } pmu_done(req); } else { -#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64) if (len == 4 && data[1] == 0x2c) { extern int xmon_wants_key, xmon_adb_keycode; if (xmon_wants_key) { @@ -1379,7 +1403,6 @@ next: return; } } -#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */ #ifdef CONFIG_ADB /* * XXX On the [23]400 the PMU gives us an up |