diff options
Diffstat (limited to 'drivers/md')
| -rw-r--r-- | drivers/md/raid5.c | 1526 |
1 files changed, 740 insertions, 786 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4f51dfa8e48..38232fa111a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -104,6 +104,23 @@ static inline int raid6_next_disk(int disk, int raid_disks) disk++; return (disk < raid_disks) ? disk : 0; } + +static void return_io(struct bio *return_bi) +{ + struct bio *bi = return_bi; + while (bi) { + int bytes = bi->bi_size; + + return_bi = bi->bi_next; + bi->bi_next = NULL; + bi->bi_size = 0; + bi->bi_end_io(bi, bytes, + test_bit(BIO_UPTODATE, &bi->bi_flags) + ? 0 : -EIO); + bi = return_bi; + } +} + static void print_raid5_conf (raid5_conf_t *conf); static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh) @@ -1326,6 +1343,608 @@ static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks) return pd_idx; } +static void +handle_requests_to_failed_array(raid5_conf_t *conf, struct stripe_head *sh, + struct stripe_head_state *s, int disks, + struct bio **return_bi) +{ + int i; + for (i = disks; i--; ) { + struct bio *bi; + int bitmap_end = 0; + + if (test_bit(R5_ReadError, &sh->dev[i].flags)) { + mdk_rdev_t *rdev; + rcu_read_lock(); + rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(In_sync, &rdev->flags)) + /* multiple read failures in one stripe */ + md_error(conf->mddev, rdev); + rcu_read_unlock(); + } + spin_lock_irq(&conf->device_lock); + /* fail all writes first */ + bi = sh->dev[i].towrite; + sh->dev[i].towrite = NULL; + if (bi) { + s->to_write--; + bitmap_end = 1; + } + + if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) + wake_up(&conf->wait_for_overlap); + + while (bi && bi->bi_sector < + sh->dev[i].sector + STRIPE_SECTORS) { + struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); + clear_bit(BIO_UPTODATE, &bi->bi_flags); + if (--bi->bi_phys_segments == 0) { + md_write_end(conf->mddev); + bi->bi_next = *return_bi; + *return_bi = bi; + } + bi = nextbi; + } + /* and fail all 'written' */ + bi = sh->dev[i].written; + sh->dev[i].written = NULL; + if (bi) bitmap_end = 1; + while (bi && bi->bi_sector < + sh->dev[i].sector + STRIPE_SECTORS) { + struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); + clear_bit(BIO_UPTODATE, &bi->bi_flags); + if (--bi->bi_phys_segments == 0) { + md_write_end(conf->mddev); + bi->bi_next = *return_bi; + *return_bi = bi; + } + bi = bi2; + } + + /* fail any reads if this device is non-operational */ + if (!test_bit(R5_Insync, &sh->dev[i].flags) || + test_bit(R5_ReadError, &sh->dev[i].flags)) { + bi = sh->dev[i].toread; + sh->dev[i].toread = NULL; + if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) + wake_up(&conf->wait_for_overlap); + if (bi) s->to_read--; + while (bi && bi->bi_sector < + sh->dev[i].sector + STRIPE_SECTORS) { + struct bio *nextbi = + r5_next_bio(bi, sh->dev[i].sector); + clear_bit(BIO_UPTODATE, &bi->bi_flags); + if (--bi->bi_phys_segments == 0) { + bi->bi_next = *return_bi; + *return_bi = bi; + } + bi = nextbi; + } + } + spin_unlock_irq(&conf->device_lock); + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, 0, 0); + } + +} + +static void handle_issuing_new_read_requests5(struct stripe_head *sh, + struct stripe_head_state *s, int disks) +{ + int i; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + (dev->toread || + (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || + s->syncing || s->expanding || + (s->failed && (sh->dev[s->failed_num].toread || + (sh->dev[s->failed_num].towrite && + !test_bit(R5_OVERWRITE, &sh->dev[s->failed_num].flags)) + )))) { + /* we would like to get this block, possibly + * by computing it, but we might not be able to + */ + if (s->uptodate == disks-1) { + PRINTK("Computing block %d\n", i); + compute_block(sh, i); + s->uptodate++; + } else if (test_bit(R5_Insync, &dev->flags)) { + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + PRINTK("Reading block %d (sync=%d)\n", + i, s->syncing); + } + } + } + set_bit(STRIPE_HANDLE, &sh->state); +} + +static void handle_issuing_new_read_requests6(struct stripe_head *sh, + struct stripe_head_state *s, struct r6_state *r6s, + int disks) +{ + int i; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + (dev->toread || (dev->towrite && + !test_bit(R5_OVERWRITE, &dev->flags)) || + s->syncing || s->expanding || + (s->failed >= 1 && + (sh->dev[r6s->failed_num[0]].toread || + s->to_write)) || + (s->failed >= 2 && + (sh->dev[r6s->failed_num[1]].toread || + s->to_write)))) { + /* we would like to get this block, possibly + * by computing it, but we might not be able to + */ + if (s->uptodate == disks-1) { + PRINTK("Computing stripe %llu block %d\n", + (unsigned long long)sh->sector, i); + compute_block_1(sh, i, 0); + s->uptodate++; + } else if ( s->uptodate == disks-2 && s->failed >= 2 ) { + /* Computing 2-failure is *very* expensive; only + * do it if failed >= 2 + */ + int other; + for (other = disks; other--; ) { + if (other == i) + continue; + if (!test_bit(R5_UPTODATE, + &sh->dev[other].flags)) + break; + } + BUG_ON(other < 0); + PRINTK("Computing stripe %llu blocks %d,%d\n", + (unsigned long long)sh->sector, + i, other); + compute_block_2(sh, i, other); + s->uptodate += 2; + } else if (test_bit(R5_Insync, &dev->flags)) { + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + PRINTK("Reading block %d (sync=%d)\n", + i, s->syncing); + } + } + } + set_bit(STRIPE_HANDLE, &sh->state); +} + + +/* handle_completed_write_requests + * any written block on an uptodate or failed drive can be returned. + * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but + * never LOCKED, so we don't need to test 'failed' directly. + */ +static void handle_completed_write_requests(raid5_conf_t *conf, + struct stripe_head *sh, int disks, struct bio **return_bi) +{ + int i; + struct r5dev *dev; + + for (i = disks; i--; ) + if (sh->dev[i].written) { + dev = &sh->dev[i]; + if (!test_bit(R5_LOCKED, &dev->flags) && + test_bit(R5_UPTODATE, &dev->flags)) { + /* We can return any write requests */ + struct bio *wbi, *wbi2; + int bitmap_end = 0; + PRINTK("Return write for disc %d\n", i); + spin_lock_irq(&conf->device_lock); + wbi = dev->written; + dev->written = NULL; + while (wbi && wbi->bi_sector < + dev->sector + STRIPE_SECTORS) { + wbi2 = r5_next_bio(wbi, dev->sector); + if (--wbi->bi_phys_segments == 0) { + md_write_end(conf->mddev); + wbi->bi_next = *return_bi; + *return_bi = wbi; + } + wbi = wbi2; + } + if (dev->towrite == NULL) + bitmap_end = 1; + spin_unlock_irq(&conf->device_lock); + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, + sh->sector, + STRIPE_SECTORS, + !test_bit(STRIPE_DEGRADED, &sh->state), + 0); + } + } +} + +static void handle_issuing_new_write_requests5(raid5_conf_t *conf, + struct stripe_head *sh, struct stripe_head_state *s, int disks) +{ + int rmw = 0, rcw = 0, i; + for (i = disks; i--; ) { + /* would I have to read this buffer for read_modify_write */ + struct r5dev *dev = &sh->dev[i]; + if ((dev->towrite || i == sh->pd_idx) && + !test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags)) { + if (test_bit(R5_Insync, &dev->flags)) + rmw++; + else + rmw += 2*disks; /* cannot read it */ + } + /* Would I have to read this buffer for reconstruct_write */ + if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && + !test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags)) { + if (test_bit(R5_Insync, &dev->flags)) + rcw++; + else + rcw += 2*disks; + } + } + PRINTK("for sector %llu, rmw=%d rcw=%d\n", + (unsigned long long)sh->sector, rmw, rcw); + set_bit(STRIPE_HANDLE, &sh->state); + if (rmw < rcw && rmw > 0) + /* prefer read-modify-write, but need to get some data */ + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if ((dev->towrite || i == sh->pd_idx) && + !test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + test_bit(R5_Insync, &dev->flags)) { + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + PRINTK("Read_old block " + "%d for r-m-w\n", i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + } else { + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + } + } + } + if (rcw <= rmw && rcw > 0) + /* want reconstruct write, but need to get some data */ + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_OVERWRITE, &dev->flags) && + i != sh->pd_idx && + !test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + test_bit(R5_Insync, &dev->flags)) { + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + PRINTK("Read_old block " + "%d for Reconstruct\n", i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + } else { + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + } + } + } + /* now if nothing is locked, and if we have enough data, + * we can start a write request + */ + if (s->locked == 0 && (rcw == 0 || rmw == 0) && + !test_bit(STRIPE_BIT_DELAY, &sh->state)) { + PRINTK("Computing parity...\n"); + compute_parity5(sh, rcw == 0 ? + RECONSTRUCT_WRITE : READ_MODIFY_WRITE); + /* now every locked buffer is ready to be written */ + for (i = disks; i--; ) + if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { + PRINTK("Writing block %d\n", i); + s->locked++; + set_bit(R5_Wantwrite, &sh->dev[i].flags); + if (!test_bit(R5_Insync, &sh->dev[i].flags) + || (i == sh->pd_idx && s->failed == 0)) + set_bit(STRIPE_INSYNC, &sh->state); + } + if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + atomic_dec(&conf->preread_active_stripes); + if (atomic_read(&conf->preread_active_stripes) < + IO_THRESHOLD) + md_wakeup_thread(conf->mddev->thread); + } + } +} + +static void handle_issuing_new_write_requests6(raid5_conf_t *conf, + struct stripe_head *sh, struct stripe_head_state *s, + struct r6_state *r6s, int disks) +{ + int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i; + int qd_idx = r6s->qd_idx; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + /* Would I have to read this buffer for reconstruct_write */ + if (!test_bit(R5_OVERWRITE, &dev->flags) + && i != pd_idx && i != qd_idx + && (!test_bit(R5_LOCKED, &dev->flags) + ) && + !test_bit(R5_UPTODATE, &dev->flags)) { + if (test_bit(R5_Insync, &dev->flags)) rcw++; + else { + PRINTK("raid6: must_compute: " + "disk %d flags=%#lx\n", i, dev->flags); + must_compute++; + } + } + } + PRINTK("for sector %llu, rcw=%d, must_compute=%d\n", + (unsigned long long)sh->sector, rcw, must_compute); + set_bit(STRIPE_HANDLE, &sh->state); + + if (rcw > 0) + /* want reconstruct write, but need to get some data */ + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_OVERWRITE, &dev->flags) + && !(s->failed == 0 && (i == pd_idx || i == qd_idx)) + && !test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + test_bit(R5_Insync, &dev->flags)) { + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + PRINTK("Read_old stripe %llu " + "block %d for Reconstruct\n", + (unsigned long long)sh->sector, i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + } else { + PRINTK("Request delayed stripe %llu " + "block %d for Reconstruct\n", + (unsigned long long)sh->sector, i); + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + } + } + } + /* now if nothing is locked, and if we have enough data, we can start a + * write request + */ + if (s->locked == 0 && rcw == 0 && + !test_bit(STRIPE_BIT_DELAY, &sh->state)) { + if (must_compute > 0) { + /* We have failed blocks and need to compute them */ + switch (s->failed) { + case 0: + BUG(); + case 1: + compute_block_1(sh, r6s->failed_num[0], 0); + break; + case 2: + compute_block_2(sh, r6s->failed_num[0], + r6s->failed_num[1]); + break; + default: /* This request should have been failed? */ + BUG(); + } + } + + PRINTK("Computing parity for stripe %llu\n", + (unsigned long long)sh->sector); + compute_parity6(sh, RECONSTRUCT_WRITE); + /* now every locked buffer is ready to be written */ + for (i = disks; i--; ) + if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { + PRINTK("Writing stripe %llu block %d\n", + (unsigned long long)sh->sector, i); + s->locked++; + set_bit(R5_Wantwrite, &sh->dev[i].flags); + } + /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */ + set_bit(STRIPE_INSYNC, &sh->state); + + if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + atomic_dec(&conf->preread_active_stripes); + if (atomic_read(&conf->preread_active_stripes) < + IO_THRESHOLD) + md_wakeup_thread(conf->mddev->thread); + } + } +} + +static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh, + struct stripe_head_state *s, int disks) +{ + set_bit(STRIPE_HANDLE, &sh->state); + if (s->failed == 0) { + BUG_ON(s->uptodate != disks); + compute_parity5(sh, CHECK_PARITY); + s->uptodate--; + if (page_is_zero(sh->dev[sh->pd_idx].page)) { + /* parity is correct (on disc, not in buffer any more) + */ + set_bit(STRIPE_INSYNC, &sh->state); + } else { + conf->mddev->resync_mismatches += STRIPE_SECTORS; + if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) + /* don't try to repair!! */ + set_bit(STRIPE_INSYNC, &sh->state); + else { + compute_block(sh, sh->pd_idx); + s->uptodate++; + } + } + } + if (!test_bit(STRIPE_INSYNC, &sh->state)) { + struct r5dev *dev; + /* either failed parity check, or recovery is happening */ + if (s->failed == 0) + s->failed_num = sh->pd_idx; + dev = &sh->dev[s->failed_num]; + BUG_ON(!test_bit(R5_UPTODATE, &dev->flags)); + BUG_ON(s->uptodate != disks); + + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + clear_bit(STRIPE_DEGRADED, &sh->state); + s->locked++; + set_bit(STRIPE_INSYNC, &sh->state); + } +} + + +static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh, + struct stripe_head_state *s, + struct r6_state *r6s, struct page *tmp_page, + int disks) +{ + int update_p = 0, update_q = 0; + struct r5dev *dev; + int pd_idx = sh->pd_idx; + int qd_idx = r6s->qd_idx; + + set_bit(STRIPE_HANDLE, &sh->state); + + BUG_ON(s->failed > 2); + BUG_ON(s->uptodate < disks); + /* Want to check and possibly repair P and Q. + * However there could be one 'failed' device, in which + * case we can only check one of them, possibly using the + * other to generate missing data + */ + + /* If !tmp_page, we cannot do the calculations, + * but as we have set STRIPE_HANDLE, we will soon be called + * by stripe_handle with a tmp_page - just wait until then. + */ + if (tmp_page) { + if (s->failed == r6s->q_failed) { + /* The only possible failed device holds 'Q', so it + * makes sense to check P (If anything else were failed, + * we would have used P to recreate it). + */ + compute_block_1(sh, pd_idx, 1); + if (!page_is_zero(sh->dev[pd_idx].page)) { + compute_block_1(sh, pd_idx, 0); + update_p = 1; + } + } + if (!r6s->q_failed && s->failed < 2) { + /* q is not failed, and we didn't use it to generate + * anything, so it makes sense to check it + */ + memcpy(page_address(tmp_page), + page_address(sh->dev[qd_idx].page), + STRIPE_SIZE); + compute_parity6(sh, UPDATE_PARITY); + if (memcmp(page_address(tmp_page), + page_address(sh->dev[qd_idx].page), + STRIPE_SIZE) != 0) { + clear_bit(STRIPE_INSYNC, &sh->state); + update_q = 1; + } + } + if (update_p || update_q) { + conf->mddev->resync_mismatches += STRIPE_SECTORS; + if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) + /* don't try to repair!! */ + update_p = update_q = 0; + } + + /* now write out any block on a failed drive, + * or P or Q if they need it + */ + + if (s->failed == 2) { + dev = &sh->dev[r6s->failed_num[1]]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + if (s->failed >= 1) { + dev = &sh->dev[r6s->failed_num[0]]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + + if (update_p) { + dev = &sh->dev[pd_idx]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + if (update_q) { + dev = &sh->dev[qd_idx]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + clear_bit(STRIPE_DEGRADED, &sh->state); + + set_bit(STRIPE_INSYNC, &sh->state); + } +} + +static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, + struct r6_state *r6s) +{ + int i; + + /* We have read all the blocks in this stripe and now we need to + * copy some of them into a target stripe for expand. + */ + clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); + for (i = 0; i < sh->disks; i++) + if (i != sh->pd_idx && (r6s && i != r6s->qd_idx)) { + int dd_idx, pd_idx, j; + struct stripe_head *sh2; + + sector_t bn = compute_blocknr(sh, i); + sector_t s = raid5_compute_sector(bn, conf->raid_disks, + conf->raid_disks - + conf->max_degraded, &dd_idx, + &pd_idx, conf); + sh2 = get_active_stripe(conf, s, conf->raid_disks, + pd_idx, 1); + if (sh2 == NULL) + /* so far only the early blocks of this stripe + * have been requested. When later blocks + * get requested, we will try again + */ + continue; + if (!test_bit(STRIPE_EXPANDING, &sh2->state) || + test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) { + /* must have already done this block */ + release_stripe(sh2); + continue; + } + memcpy(page_address(sh2->dev[dd_idx].page), + page_address(sh->dev[i].page), + STRIPE_SIZE); + set_bit(R5_Expanded, &sh2->dev[dd_idx].flags); + set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags); + for (j = 0; j < conf->raid_disks; j++) + if (j != sh2->pd_idx && + (r6s && j != r6s->qd_idx) && + !test_bit(R5_Expanded, &sh2->dev[j].flags)) + break; + if (j == conf->raid_disks) { + set_bit(STRIPE_EXPAND_READY, &sh2->state); + set_bit(STRIPE_HANDLE, &sh2->state); + } + release_stripe(sh2); + } +} /* * handle_stripe - do things to a stripe. @@ -1344,20 +1963,16 @@ static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks) * get BH_Lock set before the stripe lock is released. * */ - + static void handle_stripe5(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; - int disks = sh->disks; - struct bio *return_bi= NULL; - struct bio *bi; - int i; - int syncing, expanding, expanded; - int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0; - int non_overwrite = 0; - int failed_num=0; + int disks = sh->disks, i; + struct bio *return_bi = NULL; + struct stripe_head_state s; struct r5dev *dev; + memset(&s, 0, sizeof(s)); PRINTK("handling stripe %llu, cnt=%d, pd_idx=%d\n", (unsigned long long)sh->sector, atomic_read(&sh->count), sh->pd_idx); @@ -1366,15 +1981,15 @@ static void handle_stripe5(struct stripe_head *sh) clear_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - syncing = test_bit(STRIPE_SYNCING, &sh->state); - expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); - expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); + s.syncing = test_bit(STRIPE_SYNCING, &sh->state); + s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); + s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); /* Now to look around and see what can be done */ rcu_read_lock(); for (i=disks; i--; ) { mdk_rdev_t *rdev; - dev = &sh->dev[i]; + struct r5dev *dev = &sh->dev[i]; clear_bit(R5_Insync, &dev->flags); PRINTK("check %d: state 0x%lx read %p write %p written %p\n", @@ -1403,17 +2018,18 @@ static void handle_stripe5(struct stripe_head *sh) } /* now count some things */ - if (test_bit(R5_LOCKED, &dev->flags)) locked++; - if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++; + if (test_bit(R5_LOCKED, &dev->flags)) s.locked++; + if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++; - - if (dev->toread) to_read++; + if (dev->toread) + s.to_read++; if (dev->towrite) { - to_write++; + s.to_write++; if (!test_bit(R5_OVERWRITE, &dev->flags)) - non_overwrite++; + s.non_overwrite++; } - if (dev->written) written++; + if (dev->written) + s.written++; rdev = rcu_dereference(conf->disks[i].rdev); if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -1422,306 +2038,59 @@ static void handle_stripe5(struct stripe_head *sh) } if (!rdev || !test_bit(In_sync, &rdev->flags) || test_bit(R5_ReadError, &dev->flags)) { - failed++; - failed_num = i; + s.failed++; + s.failed_num = i; } else set_bit(R5_Insync, &dev->flags); } rcu_read_unlock(); PRINTK("locked=%d uptodate=%d to_read=%d" " to_write=%d failed=%d failed_num=%d\n", - locked, uptodate, to_read, to_write, failed, failed_num); + s.locked, s.uptodate, s.to_read, s.to_write, + s.failed, s.failed_num); /* check if the array has lost two devices and, if so, some requests might * need to be failed */ - if (failed > 1 && to_read+to_write+written) { - for (i=disks; i--; ) { - int bitmap_end = 0; - - if (test_bit(R5_ReadError, &sh->dev[i].flags)) { - mdk_rdev_t *rdev; - rcu_read_lock(); - rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && test_bit(In_sync, &rdev->flags)) - /* multiple read failures in one stripe */ - md_error(conf->mddev, rdev); - rcu_read_unlock(); - } - - spin_lock_irq(&conf->device_lock); - /* fail all writes first */ - bi = sh->dev[i].towrite; - sh->dev[i].towrite = NULL; - if (bi) { to_write--; bitmap_end = 1; } - - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - /* and fail all 'written' */ - bi = sh->dev[i].written; - sh->dev[i].written = NULL; - if (bi) bitmap_end = 1; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) { - struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = bi2; - } - - /* fail any reads if this device is non-operational */ - if (!test_bit(R5_Insync, &sh->dev[i].flags) || - test_bit(R5_ReadError, &sh->dev[i].flags)) { - bi = sh->dev[i].toread; - sh->dev[i].toread = NULL; - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - if (bi) to_read--; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - } - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, 0, 0); - } - } - if (failed > 1 && syncing) { + if (s.failed > 1 && s.to_read+s.to_write+s.written) + handle_requests_to_failed_array(conf, sh, &s, disks, + &return_bi); + if (s.failed > 1 && s.syncing) { md_done_sync(conf->mddev, STRIPE_SECTORS,0); clear_bit(STRIPE_SYNCING, &sh->state); - syncing = 0; + s.syncing = 0; } /* might be able to return some write requests if the parity block * is safe, or on a failed drive */ dev = &sh->dev[sh->pd_idx]; - if ( written && - ( (test_bit(R5_Insync, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) && - test_bit(R5_UPTODATE, &dev->flags)) - || (failed == 1 && failed_num == sh->pd_idx)) - ) { - /* any written block on an uptodate or failed drive can be returned. - * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but - * never LOCKED, so we don't need to test 'failed' directly. - */ - for (i=disks; i--; ) - if (sh->dev[i].written) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && - test_bit(R5_UPTODATE, &dev->flags) ) { - /* We can return any write requests */ - struct bio *wbi, *wbi2; - int bitmap_end = 0; - PRINTK("Return write for disc %d\n", i); - spin_lock_irq(&conf->device_lock); - wbi = dev->written; - dev->written = NULL; - while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { - wbi2 = r5_next_bio(wbi, dev->sector); - if (--wbi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - wbi->bi_next = return_bi; - return_bi = wbi; - } - wbi = wbi2; - } - if (dev->towrite == NULL) - bitmap_end = 1; - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, - !test_bit(STRIPE_DEGRADED, &sh->state), 0); - } - } - } + if ( s.written && + ((test_bit(R5_Insync, &dev->flags) && + !test_bit(R5_LOCKED, &dev->flags) && + test_bit(R5_UPTODATE, &dev->flags)) || + (s.failed == 1 && s.failed_num == sh->pd_idx))) + handle_completed_write_requests(conf, sh, disks, &return_bi); /* Now we might consider reading some blocks, either to check/generate * parity, or to satisfy requests * or to load a block that is being partially written. */ - if (to_read || non_overwrite || (syncing && (uptodate < disks)) || expanding) { - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - (dev->toread || - (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || - syncing || - expanding || - (failed && (sh->dev[failed_num].toread || - (sh->dev[failed_num].towrite && !test_bit(R5_OVERWRITE, &sh->dev[failed_num].flags)))) - ) - ) { - /* we would like to get this block, possibly - * by computing it, but we might not be able to - */ - if (uptodate == disks-1) { - PRINTK("Computing block %d\n", i); - compute_block(sh, i); - uptodate++; - } else if (test_bit(R5_Insync, &dev->flags)) { - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - PRINTK("Reading block %d (sync=%d)\n", - i, syncing); - } - } - } - set_bit(STRIPE_HANDLE, &sh->state); - } + if (s.to_read || s.non_overwrite || + (s.syncing && (s.uptodate < disks)) || s.expanding) + handle_issuing_new_read_requests5(sh, &s, disks); /* now to consider writing and what else, if anything should be read */ - if (to_write) { - int rmw=0, rcw=0; - for (i=disks ; i--;) { - /* would I have to read this buffer for read_modify_write */ - dev = &sh->dev[i]; - if ((dev->towrite || i == sh->pd_idx) && - (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags) -/* && !(!mddev->insync && i == sh->pd_idx) */ - ) - rmw++; - else rmw += 2*disks; /* cannot read it */ - } - /* Would I have to read this buffer for reconstruct_write */ - if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && - (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags)) rcw++; - else rcw += 2*disks; - } - } - PRINTK("for sector %llu, rmw=%d rcw=%d\n", - (unsigned long long)sh->sector, rmw, rcw); - set_bit(STRIPE_HANDLE, &sh->state); - if (rmw < rcw && rmw > 0) - /* prefer read-modify-write, but need to get some data */ - for (i=disks; i--;) { - dev = &sh->dev[i]; - if ((dev->towrite || i == sh->pd_idx) && - !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - { - PRINTK("Read_old block %d for r-m-w\n", i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - } else { - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } - if (rcw <= rmw && rcw > 0) - /* want reconstruct write, but need to get some data */ - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && - !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - { - PRINTK("Read_old block %d for Reconstruct\n", i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - } else { - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } - /* now if nothing is locked, and if we have enough data, we can start a write request */ - if (locked == 0 && (rcw == 0 ||rmw == 0) && - !test_bit(STRIPE_BIT_DELAY, &sh->state)) { - PRINTK("Computing parity...\n"); - compute_parity5(sh, rcw==0 ? RECONSTRUCT_WRITE : READ_MODIFY_WRITE); - /* now every locked buffer is ready to be written */ - for (i=disks; i--;) - if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { - PRINTK("Writing block %d\n", i); - locked++; - set_bit(R5_Wantwrite, &sh->dev[i].flags); - if (!test_bit(R5_Insync, &sh->dev[i].flags) - || (i==sh->pd_idx && failed == 0)) - set_bit(STRIPE_INSYNC, &sh->state); - } - if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { - atomic_dec(&conf->preread_active_stripes); - if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) - md_wakeup_thread(conf->mddev->thread); - } - } - } + if (s.to_write) + handle_issuing_new_write_requests5(conf, sh, &s, disks); /* maybe we need to check and possibly fix the parity for this stripe * Any reads will already have been scheduled, so we just see if enough data * is available */ - if (syncing && locked == 0 && - !test_bit(STRIPE_INSYNC, &sh->state)) { - set_bit(STRIPE_HANDLE, &sh->state); - if (failed == 0) { - BUG_ON(uptodate != disks); - compute_parity5(sh, CHECK_PARITY); - uptodate--; - if (page_is_zero(sh->dev[sh->pd_idx].page)) { - /* parity is correct (on disc, not in buffer any more) */ - set_bit(STRIPE_INSYNC, &sh->state); - } else { - conf->mddev->resync_mismatches += STRIPE_SECTORS; - if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) - /* don't try to repair!! */ - set_bit(STRIPE_INSYNC, &sh->state); - else { - compute_block(sh, sh->pd_idx); - uptodate++; - } - } - } - if (!test_bit(STRIPE_INSYNC, &sh->state)) { - /* either failed parity check, or recovery is happening */ - if (failed==0) - failed_num = sh->pd_idx; - dev = &sh->dev[failed_num]; - BUG_ON(!test_bit(R5_UPTODATE, &dev->flags)); - BUG_ON(uptodate != disks); - - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - clear_bit(STRIPE_DEGRADED, &sh->state); - locked++; - set_bit(STRIPE_INSYNC, &sh->state); - } - } - if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { + if (s.syncing && s.locked == 0 && + !test_bit(STRIPE_INSYNC, &sh->state)) + handle_parity_checks5(conf, sh, &s, disks); + if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { md_done_sync(conf->mddev, STRIPE_SECTORS,1); clear_bit(STRIPE_SYNCING, &sh->state); } @@ -1729,99 +2098,50 @@ static void handle_stripe5(struct stripe_head *sh) /* If the failed drive is just a ReadError, then we might need to progress * the repair/check process */ - if (failed == 1 && ! conf->mddev->ro && - test_bit(R5_ReadError, &sh->dev[failed_num].flags) - && !test_bit(R5_LOCKED, &sh->dev[failed_num].flags) - && test_bit(R5_UPTODATE, &sh->dev[failed_num].flags) + if (s.failed == 1 && !conf->mddev->ro && + test_bit(R5_ReadError, &sh->dev[s.failed_num].flags) + && !test_bit(R5_LOCKED, &sh->dev[s.failed_num].flags) + && test_bit(R5_UPTODATE, &sh->dev[s.failed_num].flags) ) { - dev = &sh->dev[failed_num]; + dev = &sh->dev[s.failed_num]; if (!test_bit(R5_ReWrite, &dev->flags)) { set_bit(R5_Wantwrite, &dev->flags); set_bit(R5_ReWrite, &dev->flags); set_bit(R5_LOCKED, &dev->flags); - locked++; + s.locked++; } else { /* let's read it back */ set_bit(R5_Wantread, &dev->flags); set_bit(R5_LOCKED, &dev->flags); - locked++; + s.locked++; } } - if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { + if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { /* Need to write out all blocks after computing parity */ sh->disks = conf->raid_disks; sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks); compute_parity5(sh, RECONSTRUCT_WRITE); - for (i= conf->raid_disks; i--;) { + for (i = conf->raid_disks; i--; ) { set_bit(R5_LOCKED, &sh->dev[i].flags); - locked++; + s.locked++; set_bit(R5_Wantwrite, &sh->dev[i].flags); } clear_bit(STRIPE_EXPANDING, &sh->state); - } else if (expanded) { + } else if (s.expanded) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); wake_up(&conf->wait_for_overlap); md_done_sync(conf->mddev, STRIPE_SECTORS, 1); } - if (expanding && locked == 0) { - /* We have read all the blocks in this stripe and now we need to - * copy some of them into a target stripe for expand. - */ - clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); - for (i=0; i< sh->disks; i++) - if (i != sh->pd_idx) { - int dd_idx, pd_idx, j; - struct stripe_head *sh2; - - sector_t bn = compute_blocknr(sh, i); - sector_t s = raid5_compute_sector(bn, conf->raid_disks, - conf->raid_disks-1, - &dd_idx, &pd_idx, conf); - sh2 = get_active_stripe(conf, s, conf->raid_disks, pd_idx, 1); - if (sh2 == NULL) - /* so far only the early blocks of this stripe - * have been requested. When later blocks - * get requested, we will try again - */ - continue; - if(!test_bit(STRIPE_EXPANDING, &sh2->state) || - test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) { - /* must have already done this block */ - release_stripe(sh2); - continue; - } - memcpy(page_address(sh2->dev[dd_idx].page), - page_address(sh->dev[i].page), - STRIPE_SIZE); - set_bit(R5_Expanded, &sh2->dev[dd_idx].flags); - set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags); - for (j=0; j<conf->raid_disks; j++) - if (j != sh2->pd_idx && - !test_bit(R5_Expanded, &sh2->dev[j].flags)) - break; - if (j == conf->raid_disks) { - set_bit(STRIPE_EXPAND_READY, &sh2->state); - set_bit(STRIPE_HANDLE, &sh2->state); - } - release_stripe(sh2); - } - } + if (s.expanding && s.locked == 0) + handle_stripe_expansion(conf, sh, NULL); spin_unlock(&sh->lock); - while ((bi=return_bi)) { - int bytes = bi->bi_size; + return_io(return_bi); - return_bi = bi->bi_next; - bi->bi_next = NULL; - bi->bi_size = 0; - bi->bi_end_io(bi, bytes, - test_bit(BIO_UPTODATE, &bi->bi_flags) - ? 0 : -EIO); - } for (i=disks; i-- ;) { int rw; struct bio *bi; @@ -1850,7 +2170,7 @@ static void handle_stripe5(struct stripe_head *sh) rcu_read_unlock(); if (rdev) { - if (syncing || expanding || expanded) + if (s.syncing || s.expanding || s.expanded) md_sync_acct(rdev->bdev, STRIPE_SECTORS); bi->bi_bdev = rdev->bdev; @@ -1886,29 +2206,26 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) { raid6_conf_t *conf = sh->raid_conf; int disks = sh->disks; - struct bio *return_bi= NULL; - struct bio *bi; - int i; - int syncing, expanding, expanded; - int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0; - int non_overwrite = 0; - int failed_num[2] = {0, 0}; + struct bio *return_bi = NULL; + int i, pd_idx = sh->pd_idx; + struct stripe_head_state s; + struct r6_state r6s; struct r5dev *dev, *pdev, *qdev; - int pd_idx = sh->pd_idx; - int qd_idx = raid6_next_disk(pd_idx, disks); - int p_failed, q_failed; - PRINTK("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d, qd_idx=%d\n", - (unsigned long long)sh->sector, sh->state, atomic_read(&sh->count), - pd_idx, qd_idx); + r6s.qd_idx = raid6_next_disk(pd_idx, disks); + PRINTK("handling stripe %llu, state=%#lx cnt=%d, " + "pd_idx=%d, qd_idx=%d\n", + (unsigned long long)sh->sector, sh->state, + atomic_read(&sh->count), pd_idx, r6s.qd_idx); + memset(&s, 0, sizeof(s)); spin_lock(&sh->lock); clear_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - syncing = test_bit(STRIPE_SYNCING, &sh->state); - expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); - expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); + s.syncing = test_bit(STRIPE_SYNCING, &sh->state); + s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); + s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); /* Now to look around and see what can be done */ rcu_read_lock(); @@ -1943,17 +2260,19 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } /* now count some things */ - if (test_bit(R5_LOCKED, &dev->flags)) locked++; - if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++; + if (test_bit(R5_LOCKED, &dev->flags)) s.locked++; + if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++; - if (dev->toread) to_read++; + if (dev->toread) + s.to_read++; if (dev->towrite) { - to_write++; + s.to_write++; if (!test_bit(R5_OVERWRITE, &dev->flags)) - non_overwrite++; + s.non_overwrite++; } - if (dev->written) written++; + if (dev->written) + s.written++; rdev = rcu_dereference(conf->disks[i].rdev); if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -1962,96 +2281,27 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } if (!rdev || !test_bit(In_sync, &rdev->flags) || test_bit(R5_ReadError, &dev->flags)) { - if ( failed < 2 ) - failed_num[failed] = i; - failed++; + if (s.failed < 2) + r6s.failed_num[s.failed] = i; + s.failed++; } else set_bit(R5_Insync, &dev->flags); } rcu_read_unlock(); PRINTK("locked=%d uptodate=%d to_read=%d" " to_write=%d failed=%d failed_num=%d,%d\n", - locked, uptodate, to_read, to_write, failed, - failed_num[0], failed_num[1]); - /* check if the array has lost >2 devices and, if so, some requests might - * need to be failed + s.locked, s.uptodate, s.to_read, s.to_write, s.failed, + r6s.failed_num[0], r6s.failed_num[1]); + /* check if the array has lost >2 devices and, if so, some requests + * might need to be failed */ - if (failed > 2 && to_read+to_write+written) { - for (i=disks; i--; ) { - int bitmap_end = 0; - - if (test_bit(R5_ReadError, &sh->dev[i].flags)) { - mdk_rdev_t *rdev; - rcu_read_lock(); - rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && test_bit(In_sync, &rdev->flags)) - /* multiple read failures in one stripe */ - md_error(conf->mddev, rdev); - rcu_read_unlock(); - } - - spin_lock_irq(&conf->device_lock); - /* fail all writes first */ - bi = sh->dev[i].towrite; - sh->dev[i].towrite = NULL; - if (bi) { to_write--; bitmap_end = 1; } - - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - /* and fail all 'written' */ - bi = sh->dev[i].written; - sh->dev[i].written = NULL; - if (bi) bitmap_end = 1; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) { - struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = bi2; - } - - /* fail any reads if this device is non-operational */ - if (!test_bit(R5_Insync, &sh->dev[i].flags) || - test_bit(R5_ReadError, &sh->dev[i].flags)) { - bi = sh->dev[i].toread; - sh->dev[i].toread = NULL; - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - if (bi) to_read--; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - } - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, 0, 0); - } - } - if (failed > 2 && syncing) { + if (s.failed > 2 && s.to_read+s.to_write+s.written) + handle_requests_to_failed_array(conf, sh, &s, disks, + &return_bi); + if (s.failed > 2 && s.syncing) { md_done_sync(conf->mddev, STRIPE_SECTORS,0); clear_bit(STRIPE_SYNCING, &sh->state); - syncing = 0; + s.syncing = 0; } /* @@ -2059,279 +2309,41 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) * are safe, or on a failed drive */ pdev = &sh->dev[pd_idx]; - p_failed = (failed >= 1 && failed_num[0] == pd_idx) - || (failed >= 2 && failed_num[1] == pd_idx); - qdev = &sh->dev[qd_idx]; - q_failed = (failed >= 1 && failed_num[0] == qd_idx) - || (failed >= 2 && failed_num[1] == qd_idx); - - if ( written && - ( p_failed || ((test_bit(R5_Insync, &pdev->flags) + r6s.p_failed = (s.failed >= 1 && r6s.failed_num[0] == pd_idx) + || (s.failed >= 2 && r6s.failed_num[1] == pd_idx); + qdev = &sh->dev[r6s.qd_idx]; + r6s.q_failed = (s.failed >= 1 && r6s.failed_num[0] == r6s.qd_idx) + || (s.failed >= 2 && r6s.failed_num[1] == r6s.qd_idx); + + if ( s.written && + ( r6s.p_failed || ((test_bit(R5_Insync, &pdev->flags) && !test_bit(R5_LOCKED, &pdev->flags) - && test_bit(R5_UPTODATE, &pdev->flags))) ) && - ( q_failed || ((test_bit(R5_Insync, &qdev->flags) + && test_bit(R5_UPTODATE, &pdev->flags)))) && + ( r6s.q_failed || ((test_bit(R5_Insync, &qdev->flags) && !test_bit(R5_LOCKED, &qdev->flags) - && test_bit(R5_UPTODATE, &qdev->flags))) ) ) { - /* any written block on an uptodate or failed drive can be - * returned. Note that if we 'wrote' to a failed drive, - * it will be UPTODATE, but never LOCKED, so we don't need - * to test 'failed' directly. - */ - for (i=disks; i--; ) - if (sh->dev[i].written) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && - test_bit(R5_UPTODATE, &dev->flags) ) { - /* We can return any write requests */ - int bitmap_end = 0; - struct bio *wbi, *wbi2; - PRINTK("Return write for stripe %llu disc %d\n", - (unsigned long long)sh->sector, i); - spin_lock_irq(&conf->device_lock); - wbi = dev->written; - dev->written = NULL; - while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { - wbi2 = r5_next_bio(wbi, dev->sector); - if (--wbi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - wbi->bi_next = return_bi; - return_bi = wbi; - } - wbi = wbi2; - } - if (dev->towrite == NULL) - bitmap_end = 1; - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, - !test_bit(STRIPE_DEGRADED, &sh->state), 0); - } - } - } + && test_bit(R5_UPTODATE, &qdev->flags))))) + handle_completed_write_requests(conf, sh, disks, &return_bi); /* Now we might consider reading some blocks, either to check/generate * parity, or to satisfy requests * or to load a block that is being partially written. */ - if (to_read || non_overwrite || (to_write && failed) || - (syncing && (uptodate < disks)) || expanding) { - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - (dev->toread || - (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || - syncing || - expanding || - (failed >= 1 && (sh->dev[failed_num[0]].toread || to_write)) || - (failed >= 2 && (sh->dev[failed_num[1]].toread || to_write)) - ) - ) { - /* we would like to get this block, possibly - * by computing it, but we might not be able to - */ - if (uptodate == disks-1) { - PRINTK("Computing stripe %llu block %d\n", - (unsigned long long)sh->sector, i); - compute_block_1(sh, i, 0); - uptodate++; - } else if ( uptodate == disks-2 && failed >= 2 ) { - /* Computing 2-failure is *very* expensive; only do it if failed >= 2 */ - int other; - for (other=disks; other--;) { - if ( other == i ) - continue; - if ( !test_bit(R5_UPTODATE, &sh->dev[other].flags) ) - break; - } - BUG_ON(other < 0); - PRINTK("Computing stripe %llu blocks %d,%d\n", - (unsigned long long)sh->sector, i, other); - compute_block_2(sh, i, other); - uptodate += 2; - } else if (test_bit(R5_Insync, &dev->flags)) { - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - PRINTK("Reading block %d (sync=%d)\n", - i, syncing); - } - } - } - set_bit(STRIPE_HANDLE, &sh->state); - } + if (s.to_read || s.non_overwrite || (s.to_write && s.failed) || + (s.syncing && (s.uptodate < disks)) || s.expanding) + handle_issuing_new_read_requests6(sh, &s, &r6s, disks); /* now to consider writing and what else, if anything should be read */ - if (to_write) { - int rcw=0, must_compute=0; - for (i=disks ; i--;) { - dev = &sh->dev[i]; - /* Would I have to read this buffer for reconstruct_write */ - if (!test_bit(R5_OVERWRITE, &dev->flags) - && i != pd_idx && i != qd_idx - && (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags)) rcw++; - else { - PRINTK("raid6: must_compute: disk %d flags=%#lx\n", i, dev->flags); - must_compute++; - } - } - } - PRINTK("for sector %llu, rcw=%d, must_compute=%d\n", - (unsigned long long)sh->sector, rcw, must_compute); - set_bit(STRIPE_HANDLE, &sh->state); - - if (rcw > 0) - /* want reconstruct write, but need to get some data */ - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_OVERWRITE, &dev->flags) - && !(failed == 0 && (i == pd_idx || i == qd_idx)) - && !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - { - PRINTK("Read_old stripe %llu block %d for Reconstruct\n", - (unsigned long long)sh->sector, i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - } else { - PRINTK("Request delayed stripe %llu block %d for Reconstruct\n", - (unsigned long long)sh->sector, i); - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } - /* now if nothing is locked, and if we have enough data, we can start a write request */ - if (locked == 0 && rcw == 0 && - !test_bit(STRIPE_BIT_DELAY, &sh->state)) { - if ( must_compute > 0 ) { - /* We have failed blocks and need to compute them */ - switch ( failed ) { - case 0: BUG(); - case 1: compute_block_1(sh, failed_num[0], 0); break; - case 2: compute_block_2(sh, failed_num[0], failed_num[1]); break; - default: BUG(); /* This request should have been failed? */ - } - } - - PRINTK("Computing parity for stripe %llu\n", (unsigned long long)sh->sector); - compute_parity6(sh, RECONSTRUCT_WRITE); - /* now every locked buffer is ready to be written */ - for (i=disks; i--;) - if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { - PRINTK("Writing stripe %llu block %d\n", - (unsigned long long)sh->sector, i); - locked++; - set_bit(R5_Wantwrite, &sh->dev[i].flags); - } - /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */ - set_bit(STRIPE_INSYNC, &sh->state); - - if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { - atomic_dec(&conf->preread_active_stripes); - if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) - md_wakeup_thread(conf->mddev->thread); - } - } - } + if (s.to_write) + handle_issuing_new_write_requests6(conf, sh, &s, &r6s, disks); /* maybe we need to check and possibly fix the parity for this stripe - * Any reads will already have been scheduled, so we just see if enough data - * is available + * Any reads will already have been scheduled, so we just see if enough + * data is available */ - if (syncing && locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state)) { - int update_p = 0, update_q = 0; - struct r5dev *dev; - - set_bit(STRIPE_HANDLE, &sh->state); + if (s.syncing && s.locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state)) + handle_parity_checks6(conf, sh, &s, &r6s, tmp_page, disks); - BUG_ON(failed>2); - BUG_ON(uptodate < disks); - /* Want to check and possibly repair P and Q. - * However there could be one 'failed' device, in which - * case we can only check one of them, possibly using the - * other to generate missing data - */ - - /* If !tmp_page, we cannot do the calculations, - * but as we have set STRIPE_HANDLE, we will soon be called - * by stripe_handle with a tmp_page - just wait until then. - */ - if (tmp_page) { - if (failed == q_failed) { - /* The only possible failed device holds 'Q', so it makes - * sense to check P (If anything else were failed, we would - * have used P to recreate it). - */ - compute_block_1(sh, pd_idx, 1); - if (!page_is_zero(sh->dev[pd_idx].page)) { - compute_block_1(sh,pd_idx,0); - update_p = 1; - } - } - if (!q_failed && failed < 2) { - /* q is not failed, and we didn't use it to generate - * anything, so it makes sense to check it - */ - memcpy(page_address(tmp_page), - page_address(sh->dev[qd_idx].page), - STRIPE_SIZE); - compute_parity6(sh, UPDATE_PARITY); - if (memcmp(page_address(tmp_page), - page_address(sh->dev[qd_idx].page), - STRIPE_SIZE)!= 0) { - clear_bit(STRIPE_INSYNC, &sh->state); - update_q = 1; - } - } - if (update_p || update_q) { - conf->mddev->resync_mismatches += STRIPE_SECTORS; - if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) - /* don't try to repair!! */ - update_p = update_q = 0; - } - - /* now write out any block on a failed drive, - * or P or Q if they need it - */ - - if (failed == 2) { - dev = &sh->dev[failed_num[1]]; - locked++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - if (failed >= 1) { - dev = &sh->dev[failed_num[0]]; - locked++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - - if (update_p) { - dev = &sh->dev[pd_idx]; - locked ++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - if (update_q) { - dev = &sh->dev[qd_idx]; - locked++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - clear_bit(STRIPE_DEGRADED, &sh->state); - - set_bit(STRIPE_INSYNC, &sh->state); - } - } - - if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { + if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { md_done_sync(conf->mddev, STRIPE_SECTORS,1); clear_bit(STRIPE_SYNCING, &sh->state); } @@ -2339,9 +2351,9 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) /* If the failed drives are just a ReadError, then we might need * to progress the repair/check process */ - if (failed <= 2 && ! conf->mddev->ro) - for (i=0; i<failed;i++) { - dev = &sh->dev[failed_num[i]]; + if (s.failed <= 2 && !conf->mddev->ro) + for (i = 0; i < s.failed; i++) { + dev = &sh->dev[r6s.failed_num[i]]; if (test_bit(R5_ReadError, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) && test_bit(R5_UPTODATE, &dev->flags) @@ -2358,7 +2370,7 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } } - if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { + if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { /* Need to write out all blocks after computing P&Q */ sh->disks = conf->raid_disks; sh->pd_idx = stripe_to_pdidx(sh->sector, conf, @@ -2366,82 +2378,24 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) compute_parity6(sh, RECONSTRUCT_WRITE); for (i = conf->raid_disks ; i-- ; ) { set_bit(R5_LOCKED, &sh->dev[i].flags); - locked++; + s.locked++; set_bit(R5_Wantwrite, &sh->dev[i].flags); } clear_bit(STRIPE_EXPANDING, &sh->state); - } else if (expanded) { + } else if (s.expanded) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); wake_up(&conf->wait_for_overlap); md_done_sync(conf->mddev, STRIPE_SECTORS, 1); } - if (expanding && locked == 0) { - /* We have read all the blocks in this stripe and now we need to - * copy some of them into a target stripe for expand. - */ - clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); - for (i = 0; i < sh->disks ; i++) - if (i != pd_idx && i != qd_idx) { - int dd_idx2, pd_idx2, j; - struct stripe_head *sh2; - - sector_t bn = compute_blocknr(sh, i); - sector_t s = raid5_compute_sector( - bn, conf->raid_disks, - conf->raid_disks - conf->max_degraded, - &dd_idx2, &pd_idx2, conf); - sh2 = get_active_stripe(conf, s, - conf->raid_disks, - pd_idx2, 1); - if (sh2 == NULL) - /* so for only the early blocks of - * this stripe have been requests. - * When later blocks get requests, we - * will try again - */ - continue; - if (!test_bit(STRIPE_EXPANDING, &sh2->state) || - test_bit(R5_Expanded, - &sh2->dev[dd_idx2].flags)) { - /* must have already done this block */ - release_stripe(sh2); - continue; - } - memcpy(page_address(sh2->dev[dd_idx2].page), - page_address(sh->dev[i].page), - STRIPE_SIZE); - set_bit(R5_Expanded, &sh2->dev[dd_idx2].flags); - set_bit(R5_UPTODATE, &sh2->dev[dd_idx2].flags); - for (j = 0 ; j < conf->raid_disks ; j++) - if (j != sh2->pd_idx && - j != raid6_next_disk(sh2->pd_idx, - sh2->disks) && - !test_bit(R5_Expanded, - &sh2->dev[j].flags)) - break; - if (j == conf->raid_disks) { - set_bit(STRIPE_EXPAND_READY, - &sh2->state); - set_bit(STRIPE_HANDLE, &sh2->state); - } - release_stripe(sh2); - } - } + if (s.expanding && s.locked == 0) + handle_stripe_expansion(conf, sh, &r6s); spin_unlock(&sh->lock); - while ((bi=return_bi)) { - int bytes = bi->bi_size; + return_io(return_bi); - return_bi = bi->bi_next; - bi->bi_next = NULL; - bi->bi_size = 0; - bi->bi_end_io(bi, bytes, - test_bit(BIO_UPTODATE, &bi->bi_flags) - ? 0 : -EIO); - } for (i=disks; i-- ;) { int rw; struct bio *bi; @@ -2470,7 +2424,7 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) rcu_read_unlock(); if (rdev) { - if (syncing || expanding || expanded) + if (s.syncing || s.expanding || s.expanded) md_sync_acct(rdev->bdev, STRIPE_SECTORS); bi->bi_bdev = rdev->bdev; |