diff options
Diffstat (limited to 'drivers/media/IR')
84 files changed, 11157 insertions, 3872 deletions
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig index 4dde7d180a3..195c6cf359f 100644 --- a/drivers/media/IR/Kconfig +++ b/drivers/media/IR/Kconfig @@ -7,3 +7,62 @@ config VIDEO_IR tristate depends on IR_CORE default IR_CORE + +source "drivers/media/IR/keymaps/Kconfig" + +config IR_NEC_DECODER + tristate "Enable IR raw decoder for the NEC protocol" + depends on IR_CORE + default y + + ---help--- + Enable this option if you have IR with NEC protocol, and + if the IR is decoded in software + +config IR_RC5_DECODER + tristate "Enable IR raw decoder for the RC-5 protocol" + depends on IR_CORE + default y + + ---help--- + Enable this option if you have IR with RC-5 protocol, and + if the IR is decoded in software + +config IR_RC6_DECODER + tristate "Enable IR raw decoder for the RC6 protocol" + depends on IR_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the RC6 protocol, and you need software decoding support. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + depends on IR_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" + depends on IR_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. + +config IR_IMON + tristate "SoundGraph iMON Receiver and Display" + depends on USB_ARCH_HAS_HCD + depends on IR_CORE + select USB + ---help--- + Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) + IR Receiver and/or LCD/VFD/VGA display. + + To compile this driver as a module, choose M here: the + module will be called imon. diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile index 171890e7a41..b998fcced2e 100644 --- a/drivers/media/IR/Makefile +++ b/drivers/media/IR/Makefile @@ -1,5 +1,15 @@ -ir-common-objs := ir-functions.o ir-keymaps.o -ir-core-objs := ir-keytable.o ir-sysfs.o +ir-common-objs := ir-functions.o +ir-core-objs := ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o + +obj-y += keymaps/ obj-$(CONFIG_IR_CORE) += ir-core.o obj-$(CONFIG_VIDEO_IR) += ir-common.o +obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o +obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o +obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o +obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o +obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o + +# stand-alone IR receivers/transmitters +obj-$(CONFIG_IR_IMON) += imon.o diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c new file mode 100644 index 00000000000..5e204567000 --- /dev/null +++ b/drivers/media/IR/imon.c @@ -0,0 +1,2396 @@ +/* + * imon.c: input and display driver for SoundGraph iMON IR/VFD/LCD + * + * Copyright(C) 2009 Jarod Wilson <jarod@wilsonet.com> + * Portions based on the original lirc_imon driver, + * Copyright(C) 2004 Venky Raju(dev@venky.ws) + * + * Huge thanks to R. Geoff Newbury for invaluable debugging on the + * 0xffdc iMON devices, and for sending me one to hack on, without + * which the support for them wouldn't be nearly as good. Thanks + * also to the numerous 0xffdc device owners that tested auto-config + * support for me and provided debug dumps from their devices. + * + * imon is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/ir-core.h> + +#include <linux/time.h> +#include <linux/timer.h> + +#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>" +#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" +#define MOD_NAME "imon" +#define MOD_VERSION "0.9.1" + +#define DISPLAY_MINOR_BASE 144 +#define DEVICE_NAME "lcd%d" + +#define BUF_CHUNK_SIZE 8 +#define BUF_SIZE 128 + +#define BIT_DURATION 250 /* each bit received is 250us */ + +#define IMON_CLOCK_ENABLE_PACKETS 2 + +/*** P R O T O T Y P E S ***/ + +/* USB Callback prototypes */ +static int imon_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void imon_disconnect(struct usb_interface *interface); +static void usb_rx_callback_intf0(struct urb *urb); +static void usb_rx_callback_intf1(struct urb *urb); +static void usb_tx_callback(struct urb *urb); + +/* suspend/resume support */ +static int imon_resume(struct usb_interface *intf); +static int imon_suspend(struct usb_interface *intf, pm_message_t message); + +/* Display file_operations function prototypes */ +static int display_open(struct inode *inode, struct file *file); +static int display_close(struct inode *inode, struct file *file); + +/* VFD write operation */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos); + +/* LCD file_operations override function prototypes */ +static ssize_t lcd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos); + +/*** G L O B A L S ***/ + +struct imon_context { + struct device *dev; + struct ir_dev_props *props; + struct ir_input_dev *ir; + /* Newer devices have two interfaces */ + struct usb_device *usbdev_intf0; + struct usb_device *usbdev_intf1; + + bool display_supported; /* not all controllers do */ + bool display_isopen; /* display port has been opened */ + bool rf_isassociating; /* RF remote associating */ + bool dev_present_intf0; /* USB device presence, interface 0 */ + bool dev_present_intf1; /* USB device presence, interface 1 */ + + struct mutex lock; /* to lock this object */ + wait_queue_head_t remove_ok; /* For unexpected USB disconnects */ + + struct usb_endpoint_descriptor *rx_endpoint_intf0; + struct usb_endpoint_descriptor *rx_endpoint_intf1; + struct usb_endpoint_descriptor *tx_endpoint; + struct urb *rx_urb_intf0; + struct urb *rx_urb_intf1; + struct urb *tx_urb; + bool tx_control; + unsigned char usb_rx_buf[8]; + unsigned char usb_tx_buf[8]; + + struct tx_t { + unsigned char data_buf[35]; /* user data buffer */ + struct completion finished; /* wait for write to finish */ + bool busy; /* write in progress */ + int status; /* status of tx completion */ + } tx; + + u16 vendor; /* usb vendor ID */ + u16 product; /* usb product ID */ + + struct input_dev *idev; /* input device for remote */ + struct input_dev *touch; /* input device for touchscreen */ + + u32 kc; /* current input keycode */ + u32 last_keycode; /* last reported input keycode */ + u64 ir_type; /* iMON or MCE (RC6) IR protocol? */ + u8 mce_toggle_bit; /* last mce toggle bit */ + bool release_code; /* some keys send a release code */ + + u8 display_type; /* store the display type */ + bool pad_mouse; /* toggle kbd(0)/mouse(1) mode */ + + char name_idev[128]; /* input device name */ + char phys_idev[64]; /* input device phys path */ + struct timer_list itimer; /* input device timer, need for rc6 */ + + char name_touch[128]; /* touch screen name */ + char phys_touch[64]; /* touch screen phys path */ + struct timer_list ttimer; /* touch screen timer */ + int touch_x; /* x coordinate on touchscreen */ + int touch_y; /* y coordinate on touchscreen */ +}; + +#define TOUCH_TIMEOUT (HZ/30) + +/* vfd character device file operations */ +static const struct file_operations vfd_fops = { + .owner = THIS_MODULE, + .open = &display_open, + .write = &vfd_write, + .release = &display_close +}; + +/* lcd character device file operations */ +static const struct file_operations lcd_fops = { + .owner = THIS_MODULE, + .open = &display_open, + .write = &lcd_write, + .release = &display_close +}; + +enum { + IMON_DISPLAY_TYPE_AUTO = 0, + IMON_DISPLAY_TYPE_VFD = 1, + IMON_DISPLAY_TYPE_LCD = 2, + IMON_DISPLAY_TYPE_VGA = 3, + IMON_DISPLAY_TYPE_NONE = 4, +}; + +enum { + IMON_KEY_IMON = 0, + IMON_KEY_MCE = 1, + IMON_KEY_PANEL = 2, +}; + +/* + * USB Device ID for iMON USB Control Boards + * + * The Windows drivers contain 6 different inf files, more or less one for + * each new device until the 0x0034-0x0046 devices, which all use the same + * driver. Some of the devices in the 34-46 range haven't been definitively + * identified yet. Early devices have either a TriGem Computer, Inc. or a + * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later + * devices use the SoundGraph vendor ID (0x15c2). This driver only supports + * the ffdc and later devices, which do onboard decoding. + */ +static struct usb_device_id imon_usb_id_table[] = { + /* + * Several devices with this same device ID, all use iMON_PAD.inf + * SoundGraph iMON PAD (IR & VFD) + * SoundGraph iMON PAD (IR & LCD) + * SoundGraph iMON Knob (IR only) + */ + { USB_DEVICE(0x15c2, 0xffdc) }, + + /* + * Newer devices, all driven by the latest iMON Windows driver, full + * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2' + * Need user input to fill in details on unknown devices. + */ + /* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */ + { USB_DEVICE(0x15c2, 0x0034) }, + /* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */ + { USB_DEVICE(0x15c2, 0x0035) }, + /* SoundGraph iMON OEM VFD (IR & VFD) */ + { USB_DEVICE(0x15c2, 0x0036) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x0037) }, + /* SoundGraph iMON OEM LCD (IR & LCD) */ + { USB_DEVICE(0x15c2, 0x0038) }, + /* SoundGraph iMON UltraBay (IR & LCD) */ + { USB_DEVICE(0x15c2, 0x0039) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003a) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003b) }, + /* SoundGraph iMON OEM Inside (IR only) */ + { USB_DEVICE(0x15c2, 0x003c) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003d) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003e) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003f) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x0040) }, + /* SoundGraph iMON MINI (IR only) */ + { USB_DEVICE(0x15c2, 0x0041) }, + /* Antec Veris Multimedia Station EZ External (IR only) */ + { USB_DEVICE(0x15c2, 0x0042) }, + /* Antec Veris Multimedia Station Basic Internal (IR only) */ + { USB_DEVICE(0x15c2, 0x0043) }, + /* Antec Veris Multimedia Station Elite (IR & VFD) */ + { USB_DEVICE(0x15c2, 0x0044) }, + /* Antec Veris Multimedia Station Premiere (IR & LCD) */ + { USB_DEVICE(0x15c2, 0x0045) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x0046) }, + {} +}; + +/* USB Device data */ +static struct usb_driver imon_driver = { + .name = MOD_NAME, + .probe = imon_probe, + .disconnect = imon_disconnect, + .suspend = imon_suspend, + .resume = imon_resume, + .id_table = imon_usb_id_table, +}; + +static struct usb_class_driver imon_vfd_class = { + .name = DEVICE_NAME, + .fops = &vfd_fops, + .minor_base = DISPLAY_MINOR_BASE, +}; + +static struct usb_class_driver imon_lcd_class = { + .name = DEVICE_NAME, + .fops = &lcd_fops, + .minor_base = DISPLAY_MINOR_BASE, +}; + +/* imon receiver front panel/knob key table */ +static const struct { + u64 hw_code; + u32 keycode; +} imon_panel_key_table[] = { + { 0x000000000f00ffeell, KEY_PROG1 }, /* Go */ + { 0x000000001f00ffeell, KEY_AUDIO }, + { 0x000000002000ffeell, KEY_VIDEO }, + { 0x000000002100ffeell, KEY_CAMERA }, + { 0x000000002700ffeell, KEY_DVD }, + { 0x000000002300ffeell, KEY_TV }, + { 0x000000000500ffeell, KEY_PREVIOUS }, + { 0x000000000700ffeell, KEY_REWIND }, + { 0x000000000400ffeell, KEY_STOP }, + { 0x000000003c00ffeell, KEY_PLAYPAUSE }, + { 0x000000000800ffeell, KEY_FASTFORWARD }, + { 0x000000000600ffeell, KEY_NEXT }, + { 0x000000010000ffeell, KEY_RIGHT }, + { 0x000001000000ffeell, KEY_LEFT }, + { 0x000000003d00ffeell, KEY_SELECT }, + { 0x000100000000ffeell, KEY_VOLUMEUP }, + { 0x010000000000ffeell, KEY_VOLUMEDOWN }, + { 0x000000000100ffeell, KEY_MUTE }, + /* iMON Knob values */ + { 0x000100ffffffffeell, KEY_VOLUMEUP }, + { 0x010000ffffffffeell, KEY_VOLUMEDOWN }, + { 0x000008ffffffffeell, KEY_MUTE }, +}; + +/* to prevent races between open() and disconnect(), probing, etc */ +static DEFINE_MUTEX(driver_lock); + +/* Module bookkeeping bits */ +MODULE_AUTHOR(MOD_AUTHOR); +MODULE_DESCRIPTION(MOD_DESC); +MODULE_VERSION(MOD_VERSION); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, imon_usb_id_table); + +static bool debug; +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)"); + +/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */ +static int display_type; +module_param(display_type, int, S_IRUGO); +MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, " + "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)"); + +static int pad_stabilize = 1; +module_param(pad_stabilize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD " + "presses in arrow key mode. 0=disable, 1=enable (default)."); + +/* + * In certain use cases, mouse mode isn't really helpful, and could actually + * cause confusion, so allow disabling it when the IR device is open. + */ +static bool nomouse; +module_param(nomouse, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is " + "open. 0=don't disable, 1=disable. (default: don't disable)"); + +/* threshold at which a pad push registers as an arrow key in kbd mode */ +static int pad_thresh; +module_param(pad_thresh, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an " + "arrow key in kbd mode (default: 28)"); + + +static void free_imon_context(struct imon_context *ictx) +{ + struct device *dev = ictx->dev; + + usb_free_urb(ictx->tx_urb); + usb_free_urb(ictx->rx_urb_intf0); + usb_free_urb(ictx->rx_urb_intf1); + kfree(ictx); + + dev_dbg(dev, "%s: iMON context freed\n", __func__); +} + +/** + * Called when the Display device (e.g. /dev/lcd0) + * is opened by the application. + */ +static int display_open(struct inode *inode, struct file *file) +{ + struct usb_interface *interface; + struct imon_context *ictx = NULL; + int subminor; + int retval = 0; + + /* prevent races with disconnect */ + mutex_lock(&driver_lock); + + subminor = iminor(inode); + interface = usb_find_interface(&imon_driver, subminor); + if (!interface) { + err("%s: could not find interface for minor %d", + __func__, subminor); + retval = -ENODEV; + goto exit; + } + ictx = usb_get_intfdata(interface); + + if (!ictx) { + err("%s: no context found for minor %d", __func__, subminor); + retval = -ENODEV; + goto exit; + } + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + err("%s: display not supported by device", __func__); + retval = -ENODEV; + } else if (ictx->display_isopen) { + err("%s: display port is already open", __func__); + retval = -EBUSY; + } else { + ictx->display_isopen = 1; + file->private_data = ictx; + dev_dbg(ictx->dev, "display port opened\n"); + } + + mutex_unlock(&ictx->lock); + +exit: + mutex_unlock(&driver_lock); + return retval; +} + +/** + * Called when the display device (e.g. /dev/lcd0) + * is closed by the application. + */ +static int display_close(struct inode *inode, struct file *file) +{ + struct imon_context *ictx = NULL; + int retval = 0; + + ictx = (struct imon_context *)file->private_data; + + if (!ictx) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + err("%s: display not supported by device", __func__); + retval = -ENODEV; + } else if (!ictx->display_isopen) { + err("%s: display is not open", __func__); + retval = -EIO; + } else { + ictx->display_isopen = 0; + dev_dbg(ictx->dev, "display port closed\n"); + if (!ictx->dev_present_intf0) { + /* + * Device disconnected before close and IR port is not + * open. If IR port is open, context will be deleted by + * ir_close. + */ + mutex_unlock(&ictx->lock); + free_imon_context(ictx); + return retval; + } + } + + mutex_unlock(&ictx->lock); + return retval; +} + +/** + * Sends a packet to the device -- this function must be called + * with ictx->lock held. + */ +static int send_packet(struct imon_context *ictx) +{ + unsigned int pipe; + unsigned long timeout; + int interval = 0; + int retval = 0; + struct usb_ctrlrequest *control_req = NULL; + + /* Check if we need to use control or interrupt urb */ + if (!ictx->tx_control) { + pipe = usb_sndintpipe(ictx->usbdev_intf0, + ictx->tx_endpoint->bEndpointAddress); + interval = ictx->tx_endpoint->bInterval; + + usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe, + ictx->usb_tx_buf, + sizeof(ictx->usb_tx_buf), + usb_tx_callback, ictx, interval); + + ictx->tx_urb->actual_length = 0; + } else { + /* fill request into kmalloc'ed space: */ + control_req = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (control_req == NULL) + return -ENOMEM; + + /* setup packet is '21 09 0200 0001 0008' */ + control_req->bRequestType = 0x21; + control_req->bRequest = 0x09; + control_req->wValue = cpu_to_le16(0x0200); + control_req->wIndex = cpu_to_le16(0x0001); + control_req->wLength = cpu_to_le16(0x0008); + + /* control pipe is endpoint 0x00 */ + pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0); + + /* build the control urb */ + usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0, + pipe, (unsigned char *)control_req, + ictx->usb_tx_buf, + sizeof(ictx->usb_tx_buf), + usb_tx_callback, ictx); + ictx->tx_urb->actual_length = 0; + } + + init_completion(&ictx->tx.finished); + ictx->tx.busy = 1; + smp_rmb(); /* ensure later readers know we're busy */ + + retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL); + if (retval) { + ictx->tx.busy = 0; + smp_rmb(); /* ensure later readers know we're not busy */ + err("%s: error submitting urb(%d)", __func__, retval); + } else { + /* Wait for transmission to complete (or abort) */ + mutex_unlock(&ictx->lock); + retval = wait_for_completion_interruptible( + &ictx->tx.finished); + if (retval) + err("%s: task interrupted", __func__); + mutex_lock(&ictx->lock); + + retval = ictx->tx.status; + if (retval) + err("%s: packet tx failed (%d)", __func__, retval); + } + + kfree(control_req); + + /* + * Induce a mandatory 5ms delay before returning, as otherwise, + * send_packet can get called so rapidly as to overwhelm the device, + * particularly on faster systems and/or those with quirky usb. + */ + timeout = msecs_to_jiffies(5); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(timeout); + + return retval; +} + +/** + * Sends an associate packet to the iMON 2.4G. + * + * This might not be such a good idea, since it has an id collision with + * some versions of the "IR & VFD" combo. The only way to determine if it + * is an RF version is to look at the product description string. (Which + * we currently do not fetch). + */ +static int send_associate_24g(struct imon_context *ictx) +{ + int retval; + const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x20 }; + + if (!ictx) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + if (!ictx->dev_present_intf0) { + err("%s: no iMON device present", __func__); + return -ENODEV; + } + + memcpy(ictx->usb_tx_buf, packet, sizeof(packet)); + retval = send_packet(ictx); + + return retval; +} + +/** + * Sends packets to setup and show clock on iMON display + * + * Arguments: year - last 2 digits of year, month - 1..12, + * day - 1..31, dow - day of the week (0-Sun...6-Sat), + * hour - 0..23, minute - 0..59, second - 0..59 + */ +static int send_set_imon_clock(struct imon_context *ictx, + unsigned int year, unsigned int month, + unsigned int day, unsigned int dow, + unsigned int hour, unsigned int minute, + unsigned int second) +{ + unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8]; + int retval = 0; + int i; + + if (!ictx) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + switch (ictx->display_type) { + case IMON_DISPLAY_TYPE_LCD: + clock_enable_pkt[0][0] = 0x80; + clock_enable_pkt[0][1] = year; + clock_enable_pkt[0][2] = month-1; + clock_enable_pkt[0][3] = day; + clock_enable_pkt[0][4] = hour; + clock_enable_pkt[0][5] = minute; + clock_enable_pkt[0][6] = second; + + clock_enable_pkt[1][0] = 0x80; + clock_enable_pkt[1][1] = 0; + clock_enable_pkt[1][2] = 0; + clock_enable_pkt[1][3] = 0; + clock_enable_pkt[1][4] = 0; + clock_enable_pkt[1][5] = 0; + clock_enable_pkt[1][6] = 0; + + if (ictx->product == 0xffdc) { + clock_enable_pkt[0][7] = 0x50; + clock_enable_pkt[1][7] = 0x51; + } else { + clock_enable_pkt[0][7] = 0x88; + clock_enable_pkt[1][7] = 0x8a; + } + + break; + + case IMON_DISPLAY_TYPE_VFD: + clock_enable_pkt[0][0] = year; + clock_enable_pkt[0][1] = month-1; + clock_enable_pkt[0][2] = day; + clock_enable_pkt[0][3] = dow; + clock_enable_pkt[0][4] = hour; + clock_enable_pkt[0][5] = minute; + clock_enable_pkt[0][6] = second; + clock_enable_pkt[0][7] = 0x40; + + clock_enable_pkt[1][0] = 0; + clock_enable_pkt[1][1] = 0; + clock_enable_pkt[1][2] = 1; + clock_enable_pkt[1][3] = 0; + clock_enable_pkt[1][4] = 0; + clock_enable_pkt[1][5] = 0; + clock_enable_pkt[1][6] = 0; + clock_enable_pkt[1][7] = 0x42; + + break; + + default: + return -ENODEV; + } + + for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) { + memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8); + retval = send_packet(ictx); + if (retval) { + err("%s: send_packet failed for packet %d", + __func__, i); + break; + } + } + + return retval; +} + +/** + * These are the sysfs functions to handle the association on the iMON 2.4G LT. + */ +static ssize_t show_associate_remote(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct imon_context *ictx = dev_get_drvdata(d); + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + if (ictx->rf_isassociating) + strcpy(buf, "associating\n"); + else + strcpy(buf, "closed\n"); + + dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for " + "instructions on how to associate your iMON 2.4G DT/LT " + "remote\n"); + mutex_unlock(&ictx->lock); + return strlen(buf); +} + +static ssize_t store_associate_remote(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct imon_context *ictx; + + ictx = dev_get_drvdata(d); + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + ictx->rf_isassociating = 1; + send_associate_24g(ictx); + mutex_unlock(&ictx->lock); + + return count; +} + +/** + * sysfs functions to control internal imon clock + */ +static ssize_t show_imon_clock(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct imon_context *ictx = dev_get_drvdata(d); + size_t len; + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + len = snprintf(buf, PAGE_SIZE, "Not supported."); + } else { + len = snprintf(buf, PAGE_SIZE, + "To set the clock on your iMON display:\n" + "# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n" + "%s", ictx->display_isopen ? + "\nNOTE: imon device must be closed\n" : ""); + } + + mutex_unlock(&ictx->lock); + + return len; +} + +static ssize_t store_imon_clock(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct imon_context *ictx = dev_get_drvdata(d); + ssize_t retval; + unsigned int year, month, day, dow, hour, minute, second; + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + retval = -ENODEV; + goto exit; + } else if (ictx->display_isopen) { + retval = -EBUSY; + goto exit; + } + + if (sscanf(buf, "%u %u %u %u %u %u %u", &year, &month, &day, &dow, + &hour, &minute, &second) != 7) { + retval = -EINVAL; + goto exit; + } + + if ((month < 1 || month > 12) || + (day < 1 || day > 31) || (dow > 6) || + (hour > 23) || (minute > 59) || (second > 59)) { + retval = -EINVAL; + goto exit; + } + + retval = send_set_imon_clock(ictx, year, month, day, dow, + hour, minute, second); + if (retval) + goto exit; + + retval = count; +exit: + mutex_unlock(&ictx->lock); + + return retval; +} + + +static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock, + store_imon_clock); + +static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote, + store_associate_remote); + +static struct attribute *imon_display_sysfs_entries[] = { + &dev_attr_imon_clock.attr, + NULL +}; + +static struct attribute_group imon_display_attribute_group = { + .attrs = imon_display_sysfs_entries +}; + +static struct attribute *imon_rf_sysfs_entries[] = { + &dev_attr_associate_remote.attr, + NULL +}; + +static struct attribute_group imon_rf_attribute_group = { + .attrs = imon_rf_sysfs_entries +}; + +/** + * Writes data to the VFD. The iMON VFD is 2x16 characters + * and requires data in 5 consecutive USB interrupt packets, + * each packet but the last carrying 7 bytes. + * + * I don't know if the VFD board supports features such as + * scrolling, clearing rows, blanking, etc. so at + * the caller must provide a full screen of data. If fewer + * than 32 bytes are provided spaces will be appended to + * generate a full screen. + */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos) +{ + int i; + int offset; + int seq; + int retval = 0; + struct imon_context *ictx; + const unsigned char vfd_packet6[] = { + 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF }; + + ictx = (struct imon_context *)file->private_data; + if (!ictx) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&ictx->lock); + + if (!ictx->dev_present_intf0) { + err("%s: no iMON device present", __func__); + retval = -ENODEV; + goto exit; + } + + if (n_bytes <= 0 || n_bytes > 32) { + err("%s: invalid payload size", __func__); + retval = -EINVAL; + goto exit; + } + + if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) { + retval = -EFAULT; + goto exit; + } + + /* Pad with spaces */ + for (i = n_bytes; i < 32; ++i) + ictx->tx.data_buf[i] = ' '; + + for (i = 32; i < 35; ++i) + ictx->tx.data_buf[i] = 0xFF; + + offset = 0; + seq = 0; + + do { + memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7); + ictx->usb_tx_buf[7] = (unsigned char) seq; + + retval = send_packet(ictx); + if (retval) { + err("%s: send packet failed for packet #%d", + __func__, seq/2); + goto exit; + } else { + seq += 2; + offset += 7; + } + + } while (offset < 35); + + /* Send packet #6 */ + memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6)); + ictx->usb_tx_buf[7] = (unsigned char) seq; + retval = send_packet(ictx); + if (retval) + err("%s: send packet failed for packet #%d", + __func__, seq / 2); + +exit: + mutex_unlock(&ictx->lock); + + return (!retval) ? n_bytes : retval; +} + +/** + * Writes data to the LCD. The iMON OEM LCD screen expects 8-byte + * packets. We accept data as 16 hexadecimal digits, followed by a + * newline (to make it easy to drive the device from a command-line + * -- even though the actual binary data is a bit complicated). + * + * The device itself is not a "traditional" text-mode display. It's + * actually a 16x96 pixel bitmap display. That means if you want to + * display text, you've got to have your own "font" and translate the + * text into bitmaps for display. This is really flexible (you can + * display whatever diacritics you need, and so on), but it's also + * a lot more complicated than most LCDs... + */ +static ssize_t lcd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos) +{ + int retval = 0; + struct imon_context *ictx; + + ictx = (struct imon_context *)file->private_data; + if (!ictx) { + err("%s: no context for device", __func__); + return -ENODEV; + } + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + err("%s: no iMON display present", __func__); + retval = -ENODEV; + goto exit; + } + + if (n_bytes != 8) { + err("%s: invalid payload size: %d (expecting 8)", + __func__, (int) n_bytes); + retval = -EINVAL; + goto exit; + } + + if (copy_from_user(ictx->usb_tx_buf, buf, 8)) { + retval = -EFAULT; + goto exit; + } + + retval = send_packet(ictx); + if (retval) { + err("%s: send packet failed!", __func__); + goto exit; + } else { + dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n", + __func__, (int) n_bytes); + } +exit: + mutex_unlock(&ictx->lock); + return (!retval) ? n_bytes : retval; +} + +/** + * Callback function for USB core API: transmit data + */ +static void usb_tx_callback(struct urb *urb) +{ + struct imon_context *ictx; + + if (!urb) + return; + ictx = (struct imon_context *)urb->context; + if (!ictx) + return; + + ictx->tx.status = urb->status; + + /* notify waiters that write has finished */ + ictx->tx.busy = 0; + smp_rmb(); /* ensure later readers know we're not busy */ + complete(&ictx->tx.finished); +} + +/** + * mce/rc6 keypresses have no distinct release code, use timer + */ +static void imon_mce_timeout(unsigned long data) +{ + struct imon_context *ictx = (struct imon_context *)data; + + input_report_key(ictx->idev, ictx->last_keycode, 0); + input_sync(ictx->idev); +} + +/** + * report touchscreen input + */ +static void imon_touch_display_timeout(unsigned long data) +{ + struct imon_context *ictx = (struct imon_context *)data; + + if (ictx->display_type != IMON_DISPLAY_TYPE_VGA) + return; + + input_report_abs(ictx->touch, ABS_X, ictx->touch_x); + input_report_abs(ictx->touch, ABS_Y, ictx->touch_y); + input_report_key(ictx->touch, BTN_TOUCH, 0x00); + input_sync(ictx->touch); +} + +/** + * iMON IR receivers support two different signal sets -- those used by + * the iMON remotes, and those used by the Windows MCE remotes (which is + * really just RC-6), but only one or the other at a time, as the signals + * are decoded onboard the receiver. + */ +int imon_ir_change_protocol(void *priv, u64 ir_type) +{ + int retval; + struct imon_context *ictx = priv; + struct device *dev = ictx->dev; + bool pad_mouse; + unsigned char ir_proto_packet[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; + + if (ir_type && !(ir_type & ictx->props->allowed_protos)) + dev_warn(dev, "Looks like you're trying to use an IR protocol " + "this device does not support\n"); + + switch (ir_type) { + case IR_TYPE_RC6: + dev_dbg(dev, "Configuring IR receiver for MCE protocol\n"); + ir_proto_packet[0] = 0x01; + pad_mouse = false; + init_timer(&ictx->itimer); + ictx->itimer.data = (unsigned long)ictx; + ictx->itimer.function = imon_mce_timeout; + break; + case IR_TYPE_UNKNOWN: + case IR_TYPE_OTHER: + dev_dbg(dev, "Configuring IR receiver for iMON protocol\n"); + if (pad_stabilize) + pad_mouse = true; + else { + dev_dbg(dev, "PAD stabilize functionality disabled\n"); + pad_mouse = false; + } + /* ir_proto_packet[0] = 0x00; // already the default */ + ir_type = IR_TYPE_OTHER; + break; + default: + dev_warn(dev, "Unsupported IR protocol specified, overriding " + "to iMON IR protocol\n"); + if (pad_stabilize) + pad_mouse = true; + else { + dev_dbg(dev, "PAD stabilize functionality disabled\n"); + pad_mouse = false; + } + /* ir_proto_packet[0] = 0x00; // already the default */ + ir_type = IR_TYPE_OTHER; + break; + } + + memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet)); + + retval = send_packet(ictx); + if (retval) + goto out; + + ictx->ir_type = ir_type; + ictx->pad_mouse = pad_mouse; + +out: + return retval; +} + +static inline int tv2int(const struct timeval *a, const struct timeval *b) +{ + int usecs = 0; + int sec = 0; + + if (b->tv_usec > a->tv_usec) { + usecs = 1000000; + sec--; + } + + usecs += a->tv_usec - b->tv_usec; + + sec += a->tv_sec - b->tv_sec; + sec *= 1000; + usecs /= 1000; + sec += usecs; + + if (sec < 0) + sec = 1000; + + return sec; +} + +/** + * The directional pad behaves a bit differently, depending on whether this is + * one of the older ffdc devices or a newer device. Newer devices appear to + * have a higher resolution matrix for more precise mouse movement, but it + * makes things overly sensitive in keyboard mode, so we do some interesting + * contortions to make it less touchy. Older devices run through the same + * routine with shorter timeout and a smaller threshold. + */ +static int stabilize(int a, int b, u16 timeout, u16 threshold) +{ + struct timeval ct; + static struct timeval prev_time = {0, 0}; + static struct timeval hit_time = {0, 0}; + static int x, y, prev_result, hits; + int result = 0; + int msec, msec_hit; + + do_gettimeofday(&ct); + msec = tv2int(&ct, &prev_time); + msec_hit = tv2int(&ct, &hit_time); + + if (msec > 100) { + x = 0; + y = 0; + hits = 0; + } + + x += a; + y += b; + + prev_time = ct; + + if (abs(x) > threshold || abs(y) > threshold) { + if (abs(y) > abs(x)) + result = (y > 0) ? 0x7F : 0x80; + else + result = (x > 0) ? 0x7F00 : 0x8000; + + x = 0; + y = 0; + + if (result == prev_result) { + hits++; + + if (hits > 3) { + switch (result) { + case 0x7F: + y = 17 * threshold / 30; + break; + case 0x80: + y -= 17 * threshold / 30; + break; + case 0x7F00: + x = 17 * threshold / 30; + break; + case 0x8000: + x -= 17 * threshold / 30; + break; + } + } + + if (hits == 2 && msec_hit < timeout) { + result = 0; + hits = 1; + } + } else { + prev_result = result; + hits = 1; + hit_time = ct; + } + } + + return result; +} + +static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 hw_code) +{ + u32 scancode = be32_to_cpu(hw_code); + u32 keycode; + u32 release; + bool is_release_code = false; + + /* Look for the initial press of a button */ + keycode = ir_g_keycode_from_table(ictx->idev, scancode); + + /* Look for the release of a button */ + if (keycode == KEY_RESERVED) { + release = scancode & ~0x4000; + keycode = ir_g_keycode_from_table(ictx->idev, release); + if (keycode != KEY_RESERVED) + is_release_code = true; + } + + ictx->release_code = is_release_code; + + return keycode; +} + +static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 hw_code) +{ + u32 scancode = be32_to_cpu(hw_code); + u32 keycode; + +#define MCE_KEY_MASK 0x7000 +#define MCE_TOGGLE_BIT 0x8000 + + /* + * On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx + * (the toggle bit flipping between alternating key presses), while + * on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep + * the table trim, we always or in the bits to look up 0x8000ff4xx, + * but we can't or them into all codes, as some keys are decoded in + * a different way w/o the same use of the toggle bit... + */ + if ((scancode >> 24) & 0x80) + scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT; + + keycode = ir_g_keycode_from_table(ictx->idev, scancode); + + return keycode; +} + +static u32 imon_panel_key_lookup(u64 hw_code) +{ + int i; + u64 code = be64_to_cpu(hw_code); + u32 keycode = KEY_RESERVED; + + for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) { + if (imon_panel_key_table[i].hw_code == (code | 0xffee)) { + keycode = imon_panel_key_table[i].keycode; + break; + } + } + + return keycode; +} + +static bool imon_mouse_event(struct imon_context *ictx, + unsigned char *buf, int len) +{ + char rel_x = 0x00, rel_y = 0x00; + u8 right_shift = 1; + bool mouse_input = 1; + int dir = 0; + + /* newer iMON device PAD or mouse button */ + if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) { + rel_x = buf[2]; + rel_y = buf[3]; + right_shift = 1; + /* 0xffdc iMON PAD or mouse button input */ + } else if (ictx->product == 0xffdc && (buf[0] & 0x40) && + !((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) { + rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 | + (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6; + if (buf[0] & 0x02) + rel_x |= ~0x0f; + rel_x = rel_x + rel_x / 2; + rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 | + (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6; + if (buf[0] & 0x01) + rel_y |= ~0x0f; + rel_y = rel_y + rel_y / 2; + right_shift = 2; + /* some ffdc devices decode mouse buttons differently... */ + } else if (ictx->product == 0xffdc && (buf[0] == 0x68)) { + right_shift = 2; + /* ch+/- buttons, which we use for an emulated scroll wheel */ + } else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) { + dir = 1; + } else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) { + dir = -1; + } else + mouse_input = 0; + + if (mouse_input) { + dev_dbg(ictx->dev, "sending mouse data via input subsystem\n"); + + if (dir) { + input_report_rel(ictx->idev, REL_WHEEL, dir); + } else if (rel_x || rel_y) { + input_report_rel(ictx->idev, REL_X, rel_x); + input_report_rel(ictx->idev, REL_Y, rel_y); + } else { + input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1); + input_report_key(ictx->idev, BTN_RIGHT, + buf[1] >> right_shift & 0x1); + } + input_sync(ictx->idev); + ictx->last_keycode = ictx->kc; + } + + return mouse_input; +} + +static void imon_touch_event(struct imon_context *ictx, unsigned char *buf) +{ + mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT); + ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4); + ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf)); + input_report_abs(ictx->touch, ABS_X, ictx->touch_x); + input_report_abs(ictx->touch, ABS_Y, ictx->touch_y); + input_report_key(ictx->touch, BTN_TOUCH, 0x01); + input_sync(ictx->touch); +} + +static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf) +{ + int dir = 0; + char rel_x = 0x00, rel_y = 0x00; + u16 timeout, threshold; + u64 temp_key; + u32 remote_key; + + /* + * The imon directional pad functions more like a touchpad. Bytes 3 & 4 + * contain a position coordinate (x,y), with each component ranging + * from -14 to 14. We want to down-sample this to only 4 discrete values + * for up/down/left/right arrow keys. Also, when you get too close to + * diagonals, it has a tendancy to jump back and forth, so lets try to + * ignore when they get too close. + */ + if (ictx->product != 0xffdc) { + /* first, pad to 8 bytes so it conforms with everything else */ + buf[5] = buf[6] = buf[7] = 0; + timeout = 500; /* in msecs */ + /* (2*threshold) x (2*threshold) square */ + threshold = pad_thresh ? pad_thresh : 28; + rel_x = buf[2]; + rel_y = buf[3]; + + if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) { + if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) { + dir = stabilize((int)rel_x, (int)rel_y, + timeout, threshold); + if (!dir) { + ictx->kc = KEY_UNKNOWN; + return; + } + buf[2] = dir & 0xFF; + buf[3] = (dir >> 8) & 0xFF; + memcpy(&temp_key, buf, sizeof(temp_key)); + remote_key = (u32) (le64_to_cpu(temp_key) + & 0xffffffff); + ictx->kc = imon_remote_key_lookup(ictx, + remote_key); + } + } else { + if (abs(rel_y) > abs(rel_x)) { + buf[2] = (rel_y > 0) ? 0x7F : 0x80; + buf[3] = 0; + ictx->kc = (rel_y > 0) ? KEY_DOWN : KEY_UP; + } else { + buf[2] = 0; + buf[3] = (rel_x > 0) ? 0x7F : 0x80; + ictx->kc = (rel_x > 0) ? KEY_RIGHT : KEY_LEFT; + } + } + + /* + * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad + * device (15c2:ffdc). The remote generates various codes from + * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates + * 0x688301b7 and the right one 0x688481b7. All other keys generate + * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with + * reversed endianess. Extract direction from buffer, rotate endianess, + * adjust sign and feed the values into stabilize(). The resulting codes + * will be 0x01008000, 0x01007F00, which match the newer devices. + */ + } else { + timeout = 10; /* in msecs */ + /* (2*threshold) x (2*threshold) square */ + threshold = pad_thresh ? pad_thresh : 15; + + /* buf[1] is x */ + rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 | + (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6; + if (buf[0] & 0x02) + rel_x |= ~0x10+1; + /* buf[2] is y */ + rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 | + (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6; + if (buf[0] & 0x01) + rel_y |= ~0x10+1; + + buf[0] = 0x01; + buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0; + + if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) { + dir = stabilize((int)rel_x, (int)rel_y, + timeout, threshold); + if (!dir) { + ictx->kc = KEY_UNKNOWN; + return; + } + buf[2] = dir & 0xFF; + buf[3] = (dir >> 8) & 0xFF; + memcpy(&temp_key, buf, sizeof(temp_key)); + remote_key = (u32) (le64_to_cpu(temp_key) & 0xffffffff); + ictx->kc = imon_remote_key_lookup(ictx, remote_key); + } else { + if (abs(rel_y) > abs(rel_x)) { + buf[2] = (rel_y > 0) ? 0x7F : 0x80; + buf[3] = 0; + ictx->kc = (rel_y > 0) ? KEY_DOWN : KEY_UP; + } else { + buf[2] = 0; + buf[3] = (rel_x > 0) ? 0x7F : 0x80; + ictx->kc = (rel_x > 0) ? KEY_RIGHT : KEY_LEFT; + } + } + } +} + +static int imon_parse_press_type(struct imon_context *ictx, + unsigned char *buf, u8 ktype) +{ + int press_type = 0; + int rep_delay = ictx->idev->rep[REP_DELAY]; + int rep_period = ictx->idev->rep[REP_PERIOD]; + + /* key release of 0x02XXXXXX key */ + if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00) + ictx->kc = ictx->last_keycode; + + /* mouse button release on (some) 0xffdc devices */ + else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 && + buf[2] == 0x81 && buf[3] == 0xb7) + ictx->kc = ictx->last_keycode; + + /* mouse button release on (some other) 0xffdc devices */ + else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 && + buf[2] == 0x81 && buf[3] == 0xb7) + ictx->kc = ictx->last_keycode; + + /* mce-specific button handling */ + else if (ktype == IMON_KEY_MCE) { + /* initial press */ + if (ictx->kc != ictx->last_keycode + || buf[2] != ictx->mce_toggle_bit) { + ictx->last_keycode = ictx->kc; + ictx->mce_toggle_bit = buf[2]; + press_type = 1; + mod_timer(&ictx->itimer, + jiffies + msecs_to_jiffies(rep_delay)); + /* repeat */ + } else { + press_type = 2; + mod_timer(&ictx->itimer, + jiffies + msecs_to_jiffies(rep_period)); + } + + /* incoherent or irrelevant data */ + } else if (ictx->kc == KEY_RESERVED) + press_type = -EINVAL; + + /* key release of 0xXXXXXXb7 key */ + else if (ictx->release_code) + press_type = 0; + + /* this is a button press */ + else + press_type = 1; + + return press_type; +} + +/** + * Process the incoming packet + */ +static void imon_incoming_packet(struct imon_context *ictx, + struct urb *urb, int intf) +{ + int len = urb->actual_length; + unsigned char *buf = urb->transfer_buffer; + struct device *dev = ictx->dev; + u32 kc; + bool norelease = 0; + int i; + u64 temp_key; + u64 panel_key = 0; + u32 remote_key = 0; + struct input_dev *idev = NULL; + int press_type = 0; + int msec; + struct timeval t; + static struct timeval prev_time = { 0, 0 }; + u8 ktype = IMON_KEY_IMON; + + idev = ictx->idev; + + /* filter out junk data on the older 0xffdc imon devices */ + if ((buf[0] == 0xff) && (buf[7] == 0xff)) + return; + + /* Figure out what key was pressed */ + memcpy(&temp_key, buf, sizeof(temp_key)); + if (len == 8 && buf[7] == 0xee) { + ktype = IMON_KEY_PANEL; + panel_key = le64_to_cpu(temp_key); + kc = imon_panel_key_lookup(panel_key); + } else { + remote_key = (u32) (le64_to_cpu(temp_key) & 0xffffffff); + if (ictx->ir_type == IR_TYPE_RC6) { + if (buf[0] == 0x80) + ktype = IMON_KEY_MCE; + kc = imon_mce_key_lookup(ictx, remote_key); + } else + kc = imon_remote_key_lookup(ictx, remote_key); + } + + /* keyboard/mouse mode toggle button */ + if (kc == KEY_KEYBOARD && !ictx->release_code) { + ictx->last_keycode = kc; + if (!nomouse) { + ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1; + dev_dbg(dev, "toggling to %s mode\n", + ictx->pad_mouse ? "mouse" : "keyboard"); + return; + } else { + ictx->pad_mouse = 0; + dev_dbg(dev, "mouse mode disabled, passing key value\n"); + } + } + + ictx->kc = kc; + + /* send touchscreen events through input subsystem if touchpad data */ + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 && + buf[7] == 0x86) { + imon_touch_event(ictx, buf); + + /* look for mouse events with pad in mouse mode */ + } else if (ictx->pad_mouse) { + if (imon_mouse_event(ictx, buf, len)) + return; + } + + /* Now for some special handling to convert pad input to arrow keys */ + if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) || + ((len == 8) && (buf[0] & 0x40) && + !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) { + len = 8; + imon_pad_to_keys(ictx, buf); + norelease = 1; + } + + if (debug) { + printk(KERN_INFO "intf%d decoded packet: ", intf); + for (i = 0; i < len; ++i) + printk("%02x ", buf[i]); + printk("\n"); + } + + press_type = imon_parse_press_type(ictx, buf, ktype); + if (press_type < 0) + goto not_input_data; + + if (ictx->kc == KEY_UNKNOWN) + goto unknown_key; + + /* KEY_MUTE repeats from MCE and knob need to be suppressed */ + if ((ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) + && (buf[7] == 0xee || ktype == IMON_KEY_MCE)) { + do_gettimeofday(&t); + msec = tv2int(&t, &prev_time); + prev_time = t; + if (msec < idev->rep[REP_DELAY]) + return; + } + + input_report_key(idev, ictx->kc, press_type); + input_sync(idev); + + /* panel keys and some remote keys don't generate a release */ + if (panel_key || norelease) { + input_report_key(idev, ictx->kc, 0); + input_sync(idev); + } + + ictx->last_keycode = ictx->kc; + + return; + +unknown_key: + dev_info(dev, "%s: unknown keypress, code 0x%llx\n", __func__, + (panel_key ? be64_to_cpu(panel_key) : + be32_to_cpu(remote_key))); + return; + +not_input_data: + if (len != 8) { + dev_warn(dev, "imon %s: invalid incoming packet " + "size (len = %d, intf%d)\n", __func__, len, intf); + return; + } + + /* iMON 2.4G associate frame */ + if (buf[0] == 0x00 && + buf[2] == 0xFF && /* REFID */ + buf[3] == 0xFF && + buf[4] == 0xFF && + buf[5] == 0xFF && /* iMON 2.4G */ + ((buf[6] == 0x4E && buf[7] == 0xDF) || /* LT */ + (buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */ + dev_warn(dev, "%s: remote associated refid=%02X\n", + __func__, buf[1]); + ictx->rf_isassociating = 0; + } +} + +/** + * Callback function for USB core API: receive data + */ +static void usb_rx_callback_intf0(struct urb *urb) +{ + struct imon_context *ictx; + int intfnum = 0; + + if (!urb) + return; + + ictx = (struct imon_context *)urb->context; + if (!ictx) + return; + + switch (urb->status) { + case -ENOENT: /* usbcore unlink successful! */ + return; + + case -ESHUTDOWN: /* transport endpoint was shut down */ + break; + + case 0: + imon_incoming_packet(ictx, urb, intfnum); + break; + + default: + dev_warn(ictx->dev, "imon %s: status(%d): ignored\n", + __func__, urb->status); + break; + } + + usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); +} + +static void usb_rx_callback_intf1(struct urb *urb) +{ + struct imon_context *ictx; + int intfnum = 1; + + if (!urb) + return; + + ictx = (struct imon_context *)urb->context; + if (!ictx) + return; + + switch (urb->status) { + case -ENOENT: /* usbcore unlink successful! */ + return; + + case -ESHUTDOWN: /* transport endpoint was shut down */ + break; + + case 0: + imon_incoming_packet(ictx, urb, intfnum); + break; + + default: + dev_warn(ictx->dev, "imon %s: status(%d): ignored\n", + __func__, urb->status); + break; + } + + usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); +} + +static struct input_dev *imon_init_idev(struct imon_context *ictx) +{ + struct input_dev *idev; + struct ir_dev_props *props; + struct ir_input_dev *ir; + int ret, i; + + idev = input_allocate_device(); + if (!idev) { + dev_err(ictx->dev, "remote input dev allocation failed\n"); + goto idev_alloc_failed; + } + + props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL); + if (!props) { + dev_err(ictx->dev, "remote ir dev props allocation failed\n"); + goto props_alloc_failed; + } + + ir = kzalloc(sizeof(struct ir_input_dev), GFP_KERNEL); + if (!ir) { + dev_err(ictx->dev, "remote ir input dev allocation failed\n"); + goto ir_dev_alloc_failed; + } + + snprintf(ictx->name_idev, sizeof(ictx->name_idev), + "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product); + idev->name = ictx->name_idev; + + usb_make_path(ictx->usbdev_intf0, ictx->phys_idev, + sizeof(ictx->phys_idev)); + strlcat(ictx->phys_idev, "/input0", sizeof(ictx->phys_idev)); + idev->phys = ictx->phys_idev; + + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL); + + idev->keybit[BIT_WORD(BTN_MOUSE)] = + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); + idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | + BIT_MASK(REL_WHEEL); + + /* panel and/or knob code support */ + for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) { + u32 kc = imon_panel_key_table[i].keycode; + __set_bit(kc, idev->keybit); + } + + props->priv = ictx; + props->driver_type = RC_DRIVER_SCANCODE; + /* IR_TYPE_OTHER maps to iMON PAD remote, IR_TYPE_RC6 to MCE remote */ + props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; + props->change_protocol = imon_ir_change_protocol; + ictx->props = props; + + ictx->ir = ir; + memcpy(&ir->dev, ictx->dev, sizeof(struct device)); + + usb_to_input_id(ictx->usbdev_intf0, &idev->id); + idev->dev.parent = ictx->dev; + + input_set_drvdata(idev, ir); + + ret = ir_input_register(idev, RC_MAP_IMON_PAD, props, MOD_NAME); + if (ret < 0) { + dev_err(ictx->dev, "remote input dev register failed\n"); + goto idev_register_failed; + } + + return idev; + +idev_register_failed: + kfree(ir); +ir_dev_alloc_failed: + kfree(props); +props_alloc_failed: + input_free_device(idev); +idev_alloc_failed: + + return NULL; +} + +static struct input_dev *imon_init_touch(struct imon_context *ictx) +{ + struct input_dev *touch; + int ret; + + touch = input_allocate_device(); + if (!touch) { + dev_err(ictx->dev, "touchscreen input dev allocation failed\n"); + goto touch_alloc_failed; + } + + snprintf(ictx->name_touch, sizeof(ictx->name_touch), + "iMON USB Touchscreen (%04x:%04x)", + ictx->vendor, ictx->product); + touch->name = ictx->name_touch; + + usb_make_path(ictx->usbdev_intf1, ictx->phys_touch, + sizeof(ictx->phys_touch)); + strlcat(ictx->phys_touch, "/input1", sizeof(ictx->phys_touch)); + touch->phys = ictx->phys_touch; + + touch->evbit[0] = + BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + touch->keybit[BIT_WORD(BTN_TOUCH)] = + BIT_MASK(BTN_TOUCH); + input_set_abs_params(touch, ABS_X, + 0x00, 0xfff, 0, 0); + input_set_abs_params(touch, ABS_Y, + 0x00, 0xfff, 0, 0); + + input_set_drvdata(touch, ictx); + + usb_to_input_id(ictx->usbdev_intf1, &touch->id); + touch->dev.parent = ictx->dev; + ret = input_register_device(touch); + if (ret < 0) { + dev_info(ictx->dev, "touchscreen input dev register failed\n"); + goto touch_register_failed; + } + + return touch; + +touch_register_failed: + input_free_device(ictx->touch); + +touch_alloc_failed: + return NULL; +} + +static bool imon_find_endpoints(struct imon_context *ictx, + struct usb_host_interface *iface_desc) +{ + struct usb_endpoint_descriptor *ep; + struct usb_endpoint_descriptor *rx_endpoint = NULL; + struct usb_endpoint_descriptor *tx_endpoint = NULL; + int ifnum = iface_desc->desc.bInterfaceNumber; + int num_endpts = iface_desc->desc.bNumEndpoints; + int i, ep_dir, ep_type; + bool ir_ep_found = 0; + bool display_ep_found = 0; + bool tx_control = 0; + + /* + * Scan the endpoint list and set: + * first input endpoint = IR endpoint + * first output endpoint = display endpoint + */ + for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) { + ep = &iface_desc->endpoint[i].desc; + ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK; + ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if (!ir_ep_found && ep_dir == USB_DIR_IN && + ep_type == USB_ENDPOINT_XFER_INT) { + + rx_endpoint = ep; + ir_ep_found = 1; + dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__); + + } else if (!display_ep_found && ep_dir == USB_DIR_OUT && + ep_type == USB_ENDPOINT_XFER_INT) { + tx_endpoint = ep; + display_ep_found = 1; + dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__); + } + } + + if (ifnum == 0) { + ictx->rx_endpoint_intf0 = rx_endpoint; + /* + * tx is used to send characters to lcd/vfd, associate RF + * remotes, set IR protocol, and maybe more... + */ + ictx->tx_endpoint = tx_endpoint; + } else { + ictx->rx_endpoint_intf1 = rx_endpoint; + } + + /* + * If we didn't find a display endpoint, this is probably one of the + * newer iMON devices that use control urb instead of interrupt + */ + if (!display_ep_found) { + tx_control = 1; + display_ep_found = 1; + dev_dbg(ictx->dev, "%s: device uses control endpoint, not " + "interface OUT endpoint\n", __func__); + } + + /* + * Some iMON receivers have no display. Unfortunately, it seems + * that SoundGraph recycles device IDs between devices both with + * and without... :\ + */ + if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) { + display_ep_found = 0; + dev_dbg(ictx->dev, "%s: device has no display\n", __func__); + } + + /* + * iMON Touch devices have a VGA touchscreen, but no "display", as + * that refers to e.g. /dev/lcd0 (a character device LCD or VFD). + */ + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { + display_ep_found = 0; + dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__); + } + + /* Input endpoint is mandatory */ + if (!ir_ep_found) + err("%s: no valid input (IR) endpoint found.", __func__); + + ictx->tx_control = tx_control; + + if (display_ep_found) + ictx->display_supported = true; + + return ir_ep_found; + +} + +static struct imon_context *imon_init_intf0(struct usb_interface *intf) +{ + struct imon_context *ictx; + struct urb *rx_urb; + struct urb *tx_urb; + struct device *dev = &intf->dev; + struct usb_host_interface *iface_desc; + int ret = -ENOMEM; + + ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL); + if (!ictx) { + dev_err(dev, "%s: kzalloc failed for context", __func__); + goto exit; + } + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rx_urb) { + dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__); + goto rx_urb_alloc_failed; + } + tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!tx_urb) { + dev_err(dev, "%s: usb_alloc_urb failed for display urb", + __func__); + goto tx_urb_alloc_failed; + } + + mutex_init(&ictx->lock); + + mutex_lock(&ictx->lock); + + ictx->dev = dev; + ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf)); + ictx->dev_present_intf0 = 1; + ictx->rx_urb_intf0 = rx_urb; + ictx->tx_urb = tx_urb; + + ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor); + ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct); + + ret = -ENODEV; + iface_desc = intf->cur_altsetting; + if (!imon_find_endpoints(ictx, iface_desc)) { + goto find_endpoint_failed; + } + + ictx->idev = imon_init_idev(ictx); + if (!ictx->idev) { + dev_err(dev, "%s: input device setup failed\n", __func__); + goto idev_setup_failed; + } + + usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0, + usb_rcvintpipe(ictx->usbdev_intf0, + ictx->rx_endpoint_intf0->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf0, ictx, + ictx->rx_endpoint_intf0->bInterval); + + ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL); + if (ret) { + err("%s: usb_submit_urb failed for intf0 (%d)", + __func__, ret); + goto urb_submit_failed; + } + + return ictx; + +urb_submit_failed: + input_unregister_device(ictx->idev); + input_free_device(ictx->idev); +idev_setup_failed: +find_endpoint_failed: + mutex_unlock(&ictx->lock); + usb_free_urb(tx_urb); +tx_urb_alloc_failed: + usb_free_urb(rx_urb); +rx_urb_alloc_failed: + kfree(ictx); +exit: + dev_err(dev, "unable to initialize intf0, err %d\n", ret); + + return NULL; +} + +static struct imon_context *imon_init_intf1(struct usb_interface *intf, + struct imon_context *ictx) +{ + struct urb *rx_urb; + struct usb_host_interface *iface_desc; + int ret = -ENOMEM; + + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rx_urb) { + err("%s: usb_alloc_urb failed for IR urb", __func__); + goto rx_urb_alloc_failed; + } + + mutex_lock(&ictx->lock); + + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { + init_timer(&ictx->ttimer); + ictx->ttimer.data = (unsigned long)ictx; + ictx->ttimer.function = imon_touch_display_timeout; + } + + ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf)); + ictx->dev_present_intf1 = 1; + ictx->rx_urb_intf1 = rx_urb; + + ret = -ENODEV; + iface_desc = intf->cur_altsetting; + if (!imon_find_endpoints(ictx, iface_desc)) + goto find_endpoint_failed; + + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { + ictx->touch = imon_init_touch(ictx); + if (!ictx->touch) + goto touch_setup_failed; + } else + ictx->touch = NULL; + + usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1, + usb_rcvintpipe(ictx->usbdev_intf1, + ictx->rx_endpoint_intf1->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf1, ictx, + ictx->rx_endpoint_intf1->bInterval); + + ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL); + + if (ret) { + err("%s: usb_submit_urb failed for intf1 (%d)", + __func__, ret); + goto urb_submit_failed; + } + + return ictx; + +urb_submit_failed: + if (ictx->touch) { + input_unregister_device(ictx->touch); + input_free_device(ictx->touch); + } +touch_setup_failed: +find_endpoint_failed: + mutex_unlock(&ictx->lock); + usb_free_urb(rx_urb); +rx_urb_alloc_failed: + dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + + return NULL; +} + +/* + * The 0x15c2:0xffdc device ID was used for umpteen different imon + * devices, and all of them constantly spew interrupts, even when there + * is no actual data to report. However, byte 6 of this buffer looks like + * its unique across device variants, so we're trying to key off that to + * figure out which display type (if any) and what IR protocol the device + * actually supports. These devices have their IR protocol hard-coded into + * their firmware, they can't be changed on the fly like the newer hardware. + */ +static void imon_get_ffdc_type(struct imon_context *ictx) +{ + u8 ffdc_cfg_byte = ictx->usb_rx_buf[6]; + u8 detected_display_type = IMON_DISPLAY_TYPE_NONE; + u64 allowed_protos = IR_TYPE_OTHER; + + switch (ffdc_cfg_byte) { + /* iMON Knob, no display, iMON IR + vol knob */ + case 0x21: + dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR"); + ictx->display_supported = false; + break; + /* iMON VFD, no IR (does have vol knob tho) */ + case 0x35: + dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + break; + /* iMON VFD, iMON IR */ + case 0x24: + case 0x85: + dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + break; + /* iMON LCD, MCE IR */ + case 0x9f: + dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR"); + detected_display_type = IMON_DISPLAY_TYPE_LCD; + allowed_protos = IR_TYPE_RC6; + break; + default: + dev_info(ictx->dev, "Unknown 0xffdc device, " + "defaulting to VFD and iMON IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + break; + } + + printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte); + + ictx->display_type = detected_display_type; + ictx->props->allowed_protos = allowed_protos; + ictx->ir_type = allowed_protos; +} + +static void imon_set_display_type(struct imon_context *ictx, + struct usb_interface *intf) +{ + u8 configured_display_type = IMON_DISPLAY_TYPE_VFD; + + /* + * Try to auto-detect the type of display if the user hasn't set + * it by hand via the display_type modparam. Default is VFD. + */ + + if (display_type == IMON_DISPLAY_TYPE_AUTO) { + switch (ictx->product) { + case 0xffdc: + /* set in imon_get_ffdc_type() */ + configured_display_type = ictx->display_type; + break; + case 0x0034: + case 0x0035: + configured_display_type = IMON_DISPLAY_TYPE_VGA; + break; + case 0x0038: + case 0x0039: + case 0x0045: + configured_display_type = IMON_DISPLAY_TYPE_LCD; + break; + case 0x003c: + case 0x0041: + case 0x0042: + case 0x0043: + configured_display_type = IMON_DISPLAY_TYPE_NONE; + ictx->display_supported = false; + break; + case 0x0036: + case 0x0044: + default: + configured_display_type = IMON_DISPLAY_TYPE_VFD; + break; + } + } else { + configured_display_type = display_type; + if (display_type == IMON_DISPLAY_TYPE_NONE) + ictx->display_supported = false; + else + ictx->display_supported = true; + dev_info(ictx->dev, "%s: overriding display type to %d via " + "modparam\n", __func__, display_type); + } + + ictx->display_type = configured_display_type; +} + +static void imon_init_display(struct imon_context *ictx, + struct usb_interface *intf) +{ + int ret; + + dev_dbg(ictx->dev, "Registering iMON display with sysfs\n"); + + /* set up sysfs entry for built-in clock */ + ret = sysfs_create_group(&intf->dev.kobj, + &imon_display_attribute_group); + if (ret) + dev_err(ictx->dev, "Could not create display sysfs " + "entries(%d)", ret); + + if (ictx->display_type == IMON_DISPLAY_TYPE_LCD) + ret = usb_register_dev(intf, &imon_lcd_class); + else + ret = usb_register_dev(intf, &imon_vfd_class); + if (ret) + /* Not a fatal error, so ignore */ + dev_info(ictx->dev, "could not get a minor number for " + "display\n"); + +} + +/** + * Callback function for USB core API: Probe + */ +static int __devinit imon_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = NULL; + struct usb_host_interface *iface_desc = NULL; + struct usb_interface *first_if; + struct device *dev = &interface->dev; + int ifnum, code_length, sysfs_err; + int ret = 0; + struct imon_context *ictx = NULL; + struct imon_context *first_if_ctx = NULL; + u16 vendor, product; + const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x88 }; + + code_length = BUF_CHUNK_SIZE * 8; + + usbdev = usb_get_dev(interface_to_usbdev(interface)); + iface_desc = interface->cur_altsetting; + ifnum = iface_desc->desc.bInterfaceNumber; + vendor = le16_to_cpu(usbdev->descriptor.idVendor); + product = le16_to_cpu(usbdev->descriptor.idProduct); + + dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n", + __func__, vendor, product, ifnum); + + /* prevent races probing devices w/multiple interfaces */ + mutex_lock(&driver_lock); + + first_if = usb_ifnum_to_if(usbdev, 0); + first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if); + + if (ifnum == 0) { + ictx = imon_init_intf0(interface); + if (!ictx) { + err("%s: failed to initialize context!\n", __func__); + ret = -ENODEV; + goto fail; + } + + if (product == 0xffdc) { + /* RF products *also* use 0xffdc... sigh... */ + sysfs_err = sysfs_create_group(&interface->dev.kobj, + &imon_rf_attribute_group); + if (sysfs_err) + err("%s: Could not create RF sysfs entries(%d)", + __func__, sysfs_err); + } + + } else { + /* this is the secondary interface on the device */ + ictx = imon_init_intf1(interface, first_if_ctx); + if (!ictx) { + err("%s: failed to attach to context!\n", __func__); + ret = -ENODEV; + goto fail; + } + + } + + usb_set_intfdata(interface, ictx); + + if (ifnum == 0) { + /* Enable front-panel buttons and/or knobs */ + memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet)); + ret = send_packet(ictx); + /* Not fatal, but warn about it */ + if (ret) + dev_info(dev, "failed to enable panel buttons " + "and/or knobs\n"); + + if (product == 0xffdc) + imon_get_ffdc_type(ictx); + + imon_set_display_type(ictx, interface); + + if (ictx->display_supported) + imon_init_display(ictx, interface); + } + + /* set IR protocol/remote type */ + ret = imon_ir_change_protocol(ictx, ictx->ir_type); + if (ret) { + dev_warn(dev, "%s: failed to set IR protocol, falling back " + "to standard iMON protocol mode\n", __func__); + ictx->ir_type = IR_TYPE_OTHER; + } + + dev_info(dev, "iMON device (%04x:%04x, intf%d) on " + "usb<%d:%d> initialized\n", vendor, product, ifnum, + usbdev->bus->busnum, usbdev->devnum); + + mutex_unlock(&ictx->lock); + mutex_unlock(&driver_lock); + + return 0; + +fail: + mutex_unlock(&driver_lock); + dev_err(dev, "unable to register, err %d\n", ret); + + return ret; +} + +/** + * Callback function for USB core API: disconnect + */ +static void __devexit imon_disconnect(struct usb_interface *interface) +{ + struct imon_context *ictx; + struct device *dev; + int ifnum; + + /* prevent races with multi-interface device probing and display_open */ + mutex_lock(&driver_lock); + + ictx = usb_get_intfdata(interface); + dev = ictx->dev; + ifnum = interface->cur_altsetting->desc.bInterfaceNumber; + + mutex_lock(&ictx->lock); + + /* + * sysfs_remove_group is safe to call even if sysfs_create_group + * hasn't been called + */ + sysfs_remove_group(&interface->dev.kobj, + &imon_display_attribute_group); + sysfs_remove_group(&interface->dev.kobj, + &imon_rf_attribute_group); + + usb_set_intfdata(interface, NULL); + + /* Abort ongoing write */ + if (ictx->tx.busy) { + usb_kill_urb(ictx->tx_urb); + complete_all(&ictx->tx.finished); + } + + if (ifnum == 0) { + ictx->dev_present_intf0 = 0; + usb_kill_urb(ictx->rx_urb_intf0); + input_unregister_device(ictx->idev); + if (ictx->display_supported) { + if (ictx->display_type == IMON_DISPLAY_TYPE_LCD) + usb_deregister_dev(interface, &imon_lcd_class); + else + usb_deregister_dev(interface, &imon_vfd_class); + } + } else { + ictx->dev_present_intf1 = 0; + usb_kill_urb(ictx->rx_urb_intf1); + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) + input_unregister_device(ictx->touch); + } + + if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) { + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) + del_timer_sync(&ictx->ttimer); + mutex_unlock(&ictx->lock); + if (!ictx->display_isopen) + free_imon_context(ictx); + } else { + if (ictx->ir_type == IR_TYPE_RC6) + del_timer_sync(&ictx->itimer); + mutex_unlock(&ictx->lock); + } + + mutex_unlock(&driver_lock); + + dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n", + __func__, ifnum); +} + +static int imon_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct imon_context *ictx = usb_get_intfdata(intf); + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + + if (ifnum == 0) + usb_kill_urb(ictx->rx_urb_intf0); + else + usb_kill_urb(ictx->rx_urb_intf1); + + return 0; +} + +static int imon_resume(struct usb_interface *intf) +{ + int rc = 0; + struct imon_context *ictx = usb_get_intfdata(intf); + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + + if (ifnum == 0) { + usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0, + usb_rcvintpipe(ictx->usbdev_intf0, + ictx->rx_endpoint_intf0->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf0, ictx, + ictx->rx_endpoint_intf0->bInterval); + + rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); + + } else { + usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1, + usb_rcvintpipe(ictx->usbdev_intf1, + ictx->rx_endpoint_intf1->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf1, ictx, + ictx->rx_endpoint_intf1->bInterval); + + rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); + } + + return rc; +} + +static int __init imon_init(void) +{ + int rc; + + rc = usb_register(&imon_driver); + if (rc) { + err("%s: usb register failed(%d)", __func__, rc); + rc = -ENODEV; + } + + return rc; +} + +static void __exit imon_exit(void) +{ + usb_deregister(&imon_driver); +} + +module_init(imon_init); +module_exit(imon_exit); diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h new file mode 100644 index 00000000000..9a5e65a471a --- /dev/null +++ b/drivers/media/IR/ir-core-priv.h @@ -0,0 +1,126 @@ +/* + * Remote Controller core raw events header + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _IR_RAW_EVENT +#define _IR_RAW_EVENT + +#include <linux/slab.h> +#include <media/ir-core.h> + +struct ir_raw_handler { + struct list_head list; + + int (*decode)(struct input_dev *input_dev, struct ir_raw_event event); + int (*raw_register)(struct input_dev *input_dev); + int (*raw_unregister)(struct input_dev *input_dev); +}; + +struct ir_raw_event_ctrl { + struct work_struct rx_work; /* for the rx decoding workqueue */ + struct kfifo kfifo; /* fifo for the pulse/space durations */ + ktime_t last_event; /* when last event occurred */ + enum raw_event_type last_type; /* last event type */ + struct input_dev *input_dev; /* pointer to the parent input_dev */ +}; + +/* macros for IR decoders */ +static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin) +{ + return d1 > (d2 - margin); +} + +static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin) +{ + return ((d1 > (d2 - margin)) && (d1 < (d2 + margin))); +} + +static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y) +{ + return x->pulse != y->pulse; +} + +static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration) +{ + if (duration > ev->duration) + ev->duration = 0; + else + ev->duration -= duration; +} + +#define TO_US(duration) (((duration) + 500) / 1000) +#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space") +#define IS_RESET(ev) (ev.duration == 0) + +/* + * Routines from ir-sysfs.c - Meant to be called only internally inside + * ir-core + */ + +int ir_register_class(struct input_dev *input_dev); +void ir_unregister_class(struct input_dev *input_dev); + +/* + * Routines from ir-raw-event.c to be used internally and by decoders + */ +int ir_raw_event_register(struct input_dev *input_dev); +void ir_raw_event_unregister(struct input_dev *input_dev); +int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler); +void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler); +void ir_raw_init(void); + + +/* + * Decoder initialization code + * + * Those load logic are called during ir-core init, and automatically + * loads the compiled decoders for their usage with IR raw events + */ + +/* from ir-nec-decoder.c */ +#ifdef CONFIG_IR_NEC_DECODER_MODULE +#define load_nec_decode() request_module("ir-nec-decoder") +#else +#define load_nec_decode() 0 +#endif + +/* from ir-rc5-decoder.c */ +#ifdef CONFIG_IR_RC5_DECODER_MODULE +#define load_rc5_decode() request_module("ir-rc5-decoder") +#else +#define load_rc5_decode() 0 +#endif + +/* from ir-rc6-decoder.c */ +#ifdef CONFIG_IR_RC6_DECODER_MODULE +#define load_rc6_decode() request_module("ir-rc6-decoder") +#else +#define load_rc6_decode() 0 +#endif + +/* from ir-jvc-decoder.c */ +#ifdef CONFIG_IR_JVC_DECODER_MODULE +#define load_jvc_decode() request_module("ir-jvc-decoder") +#else +#define load_jvc_decode() 0 +#endif + +/* from ir-sony-decoder.c */ +#ifdef CONFIG_IR_SONY_DECODER_MODULE +#define load_sony_decode() request_module("ir-sony-decoder") +#else +#define load_sony_decode() 0 +#endif + +#endif /* _IR_RAW_EVENT */ diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c index ab06919ad5f..db591e42188 100644 --- a/drivers/media/IR/ir-functions.c +++ b/drivers/media/IR/ir-functions.c @@ -24,6 +24,7 @@ #include <linux/string.h> #include <linux/jiffies.h> #include <media/ir-common.h> +#include "ir-core-priv.h" /* -------------------------------------------------------------------------- */ diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c new file mode 100644 index 00000000000..0b804944cbb --- /dev/null +++ b/drivers/media/IR/ir-jvc-decoder.c @@ -0,0 +1,320 @@ +/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol + * + * Copyright (C) 2010 by David Härdeman <david@hardeman.nu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitrev.h> +#include "ir-core-priv.h" + +#define JVC_NBITS 16 /* dev(8) + func(8) */ +#define JVC_UNIT 525000 /* ns */ +#define JVC_HEADER_PULSE (16 * JVC_UNIT) /* lack of header -> repeat */ +#define JVC_HEADER_SPACE (8 * JVC_UNIT) +#define JVC_BIT_PULSE (1 * JVC_UNIT) +#define JVC_BIT_0_SPACE (1 * JVC_UNIT) +#define JVC_BIT_1_SPACE (3 * JVC_UNIT) +#define JVC_TRAILER_PULSE (1 * JVC_UNIT) +#define JVC_TRAILER_SPACE (35 * JVC_UNIT) + +/* Used to register jvc_decoder clients */ +static LIST_HEAD(decoder_list); +DEFINE_SPINLOCK(decoder_lock); + +enum jvc_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_TRAILER_PULSE, + STATE_TRAILER_SPACE, +}; + +struct decoder_data { + struct list_head list; + struct ir_input_dev *ir_dev; + int enabled:1; + + /* State machine control */ + enum jvc_state state; + u16 jvc_bits; + u16 jvc_old_bits; + unsigned count; + bool first; + bool toggle; +}; + + +/** + * get_decoder_data() - gets decoder data + * @input_dev: input device + * + * Returns the struct decoder_data that corresponds to a device + */ +static struct decoder_data *get_decoder_data(struct ir_input_dev *ir_dev) +{ + struct decoder_data *data = NULL; + + spin_lock(&decoder_lock); + list_for_each_entry(data, &decoder_list, list) { + if (data->ir_dev == ir_dev) + break; + } + spin_unlock(&decoder_lock); + return data; +} + +static ssize_t store_enabled(struct device *d, + struct device_attribute *mattr, + const char *buf, + size_t len) +{ + unsigned long value; + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (strict_strtoul(buf, 10, &value) || value > 1) + return -EINVAL; + + data->enabled = value; + + return len; +} + +static ssize_t show_enabled(struct device *d, + struct device_attribute *mattr, char *buf) +{ + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (data->enabled) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled); + +static struct attribute *decoder_attributes[] = { + &dev_attr_enabled.attr, + NULL +}; + +static struct attribute_group decoder_attribute_group = { + .name = "jvc_decoder", + .attrs = decoder_attributes, +}; + +/** + * ir_jvc_decode() - Decode one JVC pulse or space + * @input_dev: the struct input_dev descriptor of the device + * @duration: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev) +{ + struct decoder_data *data; + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + + data = get_decoder_data(ir_dev); + if (!data) + return -EINVAL; + + if (!data->enabled) + return 0; + + if (IS_RESET(ev)) { + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2)) + goto out; + + IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2)) + break; + + data->count = 0; + data->first = true; + data->toggle = !data->toggle; + data->state = STATE_HEADER_SPACE; + return 0; + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2)) + break; + + data->state = STATE_BIT_PULSE; + return 0; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2)) + break; + + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + data->jvc_bits <<= 1; + if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) { + data->jvc_bits |= 1; + decrease_duration(&ev, JVC_BIT_1_SPACE); + } else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2)) + decrease_duration(&ev, JVC_BIT_0_SPACE); + else + break; + data->count++; + + if (data->count == JVC_NBITS) + data->state = STATE_TRAILER_PULSE; + else + data->state = STATE_BIT_PULSE; + return 0; + + case STATE_TRAILER_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2)) + break; + + data->state = STATE_TRAILER_SPACE; + return 0; + + case STATE_TRAILER_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2)) + break; + + if (data->first) { + u32 scancode; + scancode = (bitrev8((data->jvc_bits >> 8) & 0xff) << 8) | + (bitrev8((data->jvc_bits >> 0) & 0xff) << 0); + IR_dprintk(1, "JVC scancode 0x%04x\n", scancode); + ir_keydown(input_dev, scancode, data->toggle); + data->first = false; + data->jvc_old_bits = data->jvc_bits; + } else if (data->jvc_bits == data->jvc_old_bits) { + IR_dprintk(1, "JVC repeat\n"); + ir_repeat(input_dev); + } else { + IR_dprintk(1, "JVC invalid repeat msg\n"); + break; + } + + data->count = 0; + data->state = STATE_BIT_PULSE; + return 0; + } + +out: + IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static int ir_jvc_register(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + struct decoder_data *data; + int rc; + + rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group); + if (rc < 0) + return rc; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + return -ENOMEM; + } + + data->ir_dev = ir_dev; + data->enabled = 1; + + spin_lock(&decoder_lock); + list_add_tail(&data->list, &decoder_list); + spin_unlock(&decoder_lock); + + return 0; +} + +static int ir_jvc_unregister(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + static struct decoder_data *data; + + data = get_decoder_data(ir_dev); + if (!data) + return 0; + + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + + spin_lock(&decoder_lock); + list_del(&data->list); + spin_unlock(&decoder_lock); + + return 0; +} + +static struct ir_raw_handler jvc_handler = { + .decode = ir_jvc_decode, + .raw_register = ir_jvc_register, + .raw_unregister = ir_jvc_unregister, +}; + +static int __init ir_jvc_decode_init(void) +{ + ir_raw_handler_register(&jvc_handler); + + printk(KERN_INFO "IR JVC protocol handler initialized\n"); + return 0; +} + +static void __exit ir_jvc_decode_exit(void) +{ + ir_raw_handler_unregister(&jvc_handler); +} + +module_init(ir_jvc_decode_init); +module_exit(ir_jvc_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("JVC IR protocol decoder"); diff --git a/drivers/media/IR/ir-keymaps.c b/drivers/media/IR/ir-keymaps.c deleted file mode 100644 index 0efdefe75f3..00000000000 --- a/drivers/media/IR/ir-keymaps.c +++ /dev/null @@ -1,3494 +0,0 @@ -/* - Keytables for supported remote controls, used on drivers/media - devices. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - * NOTICE FOR DEVELOPERS: - * The IR mappings should be as close as possible to what's - * specified at: - * http://linuxtv.org/wiki/index.php/Remote_Controllers - */ -#include <linux/module.h> - -#include <linux/input.h> -#include <media/ir-common.h> - -/* empty keytable, can be used as placeholder for not-yet created keytables */ -static struct ir_scancode ir_codes_empty[] = { - { 0x2a, KEY_COFFEE }, -}; - -struct ir_scancode_table ir_codes_empty_table = { - .scan = ir_codes_empty, - .size = ARRAY_SIZE(ir_codes_empty), -}; -EXPORT_SYMBOL_GPL(ir_codes_empty_table); - -/* Michal Majchrowicz <mmajchrowicz@gmail.com> */ -static struct ir_scancode ir_codes_proteus_2309[] = { - /* numeric */ - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x5c, KEY_POWER }, /* power */ - { 0x20, KEY_ZOOM }, /* full screen */ - { 0x0f, KEY_BACKSPACE }, /* recall */ - { 0x1b, KEY_ENTER }, /* mute */ - { 0x41, KEY_RECORD }, /* record */ - { 0x43, KEY_STOP }, /* stop */ - { 0x16, KEY_S }, - { 0x1a, KEY_POWER2 }, /* off */ - { 0x2e, KEY_RED }, - { 0x1f, KEY_CHANNELDOWN }, /* channel - */ - { 0x1c, KEY_CHANNELUP }, /* channel + */ - { 0x10, KEY_VOLUMEDOWN }, /* volume - */ - { 0x1e, KEY_VOLUMEUP }, /* volume + */ - { 0x14, KEY_F1 }, -}; - -struct ir_scancode_table ir_codes_proteus_2309_table = { - .scan = ir_codes_proteus_2309, - .size = ARRAY_SIZE(ir_codes_proteus_2309), -}; -EXPORT_SYMBOL_GPL(ir_codes_proteus_2309_table); - -/* Matt Jesson <dvb@jesson.eclipse.co.uk */ -static struct ir_scancode ir_codes_avermedia_dvbt[] = { - { 0x28, KEY_0 }, /* '0' / 'enter' */ - { 0x22, KEY_1 }, /* '1' */ - { 0x12, KEY_2 }, /* '2' / 'up arrow' */ - { 0x32, KEY_3 }, /* '3' */ - { 0x24, KEY_4 }, /* '4' / 'left arrow' */ - { 0x14, KEY_5 }, /* '5' */ - { 0x34, KEY_6 }, /* '6' / 'right arrow' */ - { 0x26, KEY_7 }, /* '7' */ - { 0x16, KEY_8 }, /* '8' / 'down arrow' */ - { 0x36, KEY_9 }, /* '9' */ - - { 0x20, KEY_LIST }, /* 'source' */ - { 0x10, KEY_TEXT }, /* 'teletext' */ - { 0x00, KEY_POWER }, /* 'power' */ - { 0x04, KEY_AUDIO }, /* 'audio' */ - { 0x06, KEY_ZOOM }, /* 'full screen' */ - { 0x18, KEY_VIDEO }, /* 'display' */ - { 0x38, KEY_SEARCH }, /* 'loop' */ - { 0x08, KEY_INFO }, /* 'preview' */ - { 0x2a, KEY_REWIND }, /* 'backward <<' */ - { 0x1a, KEY_FASTFORWARD }, /* 'forward >>' */ - { 0x3a, KEY_RECORD }, /* 'capture' */ - { 0x0a, KEY_MUTE }, /* 'mute' */ - { 0x2c, KEY_RECORD }, /* 'record' */ - { 0x1c, KEY_PAUSE }, /* 'pause' */ - { 0x3c, KEY_STOP }, /* 'stop' */ - { 0x0c, KEY_PLAY }, /* 'play' */ - { 0x2e, KEY_RED }, /* 'red' */ - { 0x01, KEY_BLUE }, /* 'blue' / 'cancel' */ - { 0x0e, KEY_YELLOW }, /* 'yellow' / 'ok' */ - { 0x21, KEY_GREEN }, /* 'green' */ - { 0x11, KEY_CHANNELDOWN }, /* 'channel -' */ - { 0x31, KEY_CHANNELUP }, /* 'channel +' */ - { 0x1e, KEY_VOLUMEDOWN }, /* 'volume -' */ - { 0x3e, KEY_VOLUMEUP }, /* 'volume +' */ -}; - -struct ir_scancode_table ir_codes_avermedia_dvbt_table = { - .scan = ir_codes_avermedia_dvbt, - .size = ARRAY_SIZE(ir_codes_avermedia_dvbt), -}; -EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvbt_table); - -/* Mauro Carvalho Chehab <mchehab@infradead.org> */ -static struct ir_scancode ir_codes_avermedia_m135a[] = { - { 0x00, KEY_POWER2 }, - { 0x2e, KEY_DOT }, /* '.' */ - { 0x01, KEY_MODE }, /* TV/FM */ - - { 0x05, KEY_1 }, - { 0x06, KEY_2 }, - { 0x07, KEY_3 }, - { 0x09, KEY_4 }, - { 0x0a, KEY_5 }, - { 0x0b, KEY_6 }, - { 0x0d, KEY_7 }, - { 0x0e, KEY_8 }, - { 0x0f, KEY_9 }, - { 0x11, KEY_0 }, - - { 0x13, KEY_RIGHT }, /* -> */ - { 0x12, KEY_LEFT }, /* <- */ - - { 0x17, KEY_SLEEP }, /* Capturar Imagem */ - { 0x10, KEY_SHUFFLE }, /* Amostra */ - - /* FIXME: The keys bellow aren't ok */ - - { 0x43, KEY_CHANNELUP }, - { 0x42, KEY_CHANNELDOWN }, - { 0x1f, KEY_VOLUMEUP }, - { 0x1e, KEY_VOLUMEDOWN }, - { 0x0c, KEY_ENTER }, - - { 0x14, KEY_MUTE }, - { 0x08, KEY_AUDIO }, - - { 0x03, KEY_TEXT }, - { 0x04, KEY_EPG }, - { 0x2b, KEY_TV2 }, /* TV2 */ - - { 0x1d, KEY_RED }, - { 0x1c, KEY_YELLOW }, - { 0x41, KEY_GREEN }, - { 0x40, KEY_BLUE }, - - { 0x1a, KEY_PLAYPAUSE }, - { 0x19, KEY_RECORD }, - { 0x18, KEY_PLAY }, - { 0x1b, KEY_STOP }, -}; - -struct ir_scancode_table ir_codes_avermedia_m135a_table = { - .scan = ir_codes_avermedia_m135a, - .size = ARRAY_SIZE(ir_codes_avermedia_m135a), -}; -EXPORT_SYMBOL_GPL(ir_codes_avermedia_m135a_table); - -/* Oldrich Jedlicka <oldium.pro@seznam.cz> */ -static struct ir_scancode ir_codes_avermedia_cardbus[] = { - { 0x00, KEY_POWER }, - { 0x01, KEY_TUNER }, /* TV/FM */ - { 0x03, KEY_TEXT }, /* Teletext */ - { 0x04, KEY_EPG }, - { 0x05, KEY_1 }, - { 0x06, KEY_2 }, - { 0x07, KEY_3 }, - { 0x08, KEY_AUDIO }, - { 0x09, KEY_4 }, - { 0x0a, KEY_5 }, - { 0x0b, KEY_6 }, - { 0x0c, KEY_ZOOM }, /* Full screen */ - { 0x0d, KEY_7 }, - { 0x0e, KEY_8 }, - { 0x0f, KEY_9 }, - { 0x10, KEY_PAGEUP }, /* 16-CH PREV */ - { 0x11, KEY_0 }, - { 0x12, KEY_INFO }, - { 0x13, KEY_AGAIN }, /* CH RTN - channel return */ - { 0x14, KEY_MUTE }, - { 0x15, KEY_EDIT }, /* Autoscan */ - { 0x17, KEY_SAVE }, /* Screenshot */ - { 0x18, KEY_PLAYPAUSE }, - { 0x19, KEY_RECORD }, - { 0x1a, KEY_PLAY }, - { 0x1b, KEY_STOP }, - { 0x1c, KEY_FASTFORWARD }, - { 0x1d, KEY_REWIND }, - { 0x1e, KEY_VOLUMEDOWN }, - { 0x1f, KEY_VOLUMEUP }, - { 0x22, KEY_SLEEP }, /* Sleep */ - { 0x23, KEY_ZOOM }, /* Aspect */ - { 0x26, KEY_SCREEN }, /* Pos */ - { 0x27, KEY_ANGLE }, /* Size */ - { 0x28, KEY_SELECT }, /* Select */ - { 0x29, KEY_BLUE }, /* Blue/Picture */ - { 0x2a, KEY_BACKSPACE }, /* Back */ - { 0x2b, KEY_MEDIA }, /* PIP (Picture-in-picture) */ - { 0x2c, KEY_DOWN }, - { 0x2e, KEY_DOT }, - { 0x2f, KEY_TV }, /* Live TV */ - { 0x32, KEY_LEFT }, - { 0x33, KEY_CLEAR }, /* Clear */ - { 0x35, KEY_RED }, /* Red/TV */ - { 0x36, KEY_UP }, - { 0x37, KEY_HOME }, /* Home */ - { 0x39, KEY_GREEN }, /* Green/Video */ - { 0x3d, KEY_YELLOW }, /* Yellow/Music */ - { 0x3e, KEY_OK }, /* Ok */ - { 0x3f, KEY_RIGHT }, - { 0x40, KEY_NEXT }, /* Next */ - { 0x41, KEY_PREVIOUS }, /* Previous */ - { 0x42, KEY_CHANNELDOWN }, /* Channel down */ - { 0x43, KEY_CHANNELUP }, /* Channel up */ -}; - -struct ir_scancode_table ir_codes_avermedia_cardbus_table = { - .scan = ir_codes_avermedia_cardbus, - .size = ARRAY_SIZE(ir_codes_avermedia_cardbus), -}; -EXPORT_SYMBOL_GPL(ir_codes_avermedia_cardbus_table); - -/* Attila Kondoros <attila.kondoros@chello.hu> */ -static struct ir_scancode ir_codes_apac_viewcomp[] = { - - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x00, KEY_0 }, - { 0x17, KEY_LAST }, /* +100 */ - { 0x0a, KEY_LIST }, /* recall */ - - - { 0x1c, KEY_TUNER }, /* TV/FM */ - { 0x15, KEY_SEARCH }, /* scan */ - { 0x12, KEY_POWER }, /* power */ - { 0x1f, KEY_VOLUMEDOWN }, /* vol up */ - { 0x1b, KEY_VOLUMEUP }, /* vol down */ - { 0x1e, KEY_CHANNELDOWN }, /* chn up */ - { 0x1a, KEY_CHANNELUP }, /* chn down */ - - { 0x11, KEY_VIDEO }, /* video */ - { 0x0f, KEY_ZOOM }, /* full screen */ - { 0x13, KEY_MUTE }, /* mute/unmute */ - { 0x10, KEY_TEXT }, /* min */ - - { 0x0d, KEY_STOP }, /* freeze */ - { 0x0e, KEY_RECORD }, /* record */ - { 0x1d, KEY_PLAYPAUSE }, /* stop */ - { 0x19, KEY_PLAY }, /* play */ - - { 0x16, KEY_GOTO }, /* osd */ - { 0x14, KEY_REFRESH }, /* default */ - { 0x0c, KEY_KPPLUS }, /* fine tune >>>> */ - { 0x18, KEY_KPMINUS }, /* fine tune <<<< */ -}; - -struct ir_scancode_table ir_codes_apac_viewcomp_table = { - .scan = ir_codes_apac_viewcomp, - .size = ARRAY_SIZE(ir_codes_apac_viewcomp), -}; -EXPORT_SYMBOL_GPL(ir_codes_apac_viewcomp_table); - -/* ---------------------------------------------------------------------- */ - -static struct ir_scancode ir_codes_pixelview[] = { - - { 0x1e, KEY_POWER }, /* power */ - { 0x07, KEY_MEDIA }, /* source */ - { 0x1c, KEY_SEARCH }, /* scan */ - - - { 0x03, KEY_TUNER }, /* TV/FM */ - - { 0x00, KEY_RECORD }, - { 0x08, KEY_STOP }, - { 0x11, KEY_PLAY }, - - { 0x1a, KEY_PLAYPAUSE }, /* freeze */ - { 0x19, KEY_ZOOM }, /* zoom */ - { 0x0f, KEY_TEXT }, /* min */ - - { 0x01, KEY_1 }, - { 0x0b, KEY_2 }, - { 0x1b, KEY_3 }, - { 0x05, KEY_4 }, - { 0x09, KEY_5 }, - { 0x15, KEY_6 }, - { 0x06, KEY_7 }, - { 0x0a, KEY_8 }, - { 0x12, KEY_9 }, - { 0x02, KEY_0 }, - { 0x10, KEY_LAST }, /* +100 */ - { 0x13, KEY_LIST }, /* recall */ - - { 0x1f, KEY_CHANNELUP }, /* chn down */ - { 0x17, KEY_CHANNELDOWN }, /* chn up */ - { 0x16, KEY_VOLUMEUP }, /* vol down */ - { 0x14, KEY_VOLUMEDOWN }, /* vol up */ - - { 0x04, KEY_KPMINUS }, /* <<< */ - { 0x0e, KEY_SETUP }, /* function */ - { 0x0c, KEY_KPPLUS }, /* >>> */ - - { 0x0d, KEY_GOTO }, /* mts */ - { 0x1d, KEY_REFRESH }, /* reset */ - { 0x18, KEY_MUTE }, /* mute/unmute */ -}; - -struct ir_scancode_table ir_codes_pixelview_table = { - .scan = ir_codes_pixelview, - .size = ARRAY_SIZE(ir_codes_pixelview), -}; -EXPORT_SYMBOL_GPL(ir_codes_pixelview_table); - -/* - Mauro Carvalho Chehab <mchehab@infradead.org> - present on PV MPEG 8000GT - */ -static struct ir_scancode ir_codes_pixelview_new[] = { - { 0x3c, KEY_TIME }, /* Timeshift */ - { 0x12, KEY_POWER }, - - { 0x3d, KEY_1 }, - { 0x38, KEY_2 }, - { 0x18, KEY_3 }, - { 0x35, KEY_4 }, - { 0x39, KEY_5 }, - { 0x15, KEY_6 }, - { 0x36, KEY_7 }, - { 0x3a, KEY_8 }, - { 0x1e, KEY_9 }, - { 0x3e, KEY_0 }, - - { 0x1c, KEY_AGAIN }, /* LOOP */ - { 0x3f, KEY_MEDIA }, /* Source */ - { 0x1f, KEY_LAST }, /* +100 */ - { 0x1b, KEY_MUTE }, - - { 0x17, KEY_CHANNELDOWN }, - { 0x16, KEY_CHANNELUP }, - { 0x10, KEY_VOLUMEUP }, - { 0x14, KEY_VOLUMEDOWN }, - { 0x13, KEY_ZOOM }, - - { 0x19, KEY_CAMERA }, /* SNAPSHOT */ - { 0x1a, KEY_SEARCH }, /* scan */ - - { 0x37, KEY_REWIND }, /* << */ - { 0x32, KEY_RECORD }, /* o (red) */ - { 0x33, KEY_FORWARD }, /* >> */ - { 0x11, KEY_STOP }, /* square */ - { 0x3b, KEY_PLAY }, /* > */ - { 0x30, KEY_PLAYPAUSE }, /* || */ - - { 0x31, KEY_TV }, - { 0x34, KEY_RADIO }, -}; - -struct ir_scancode_table ir_codes_pixelview_new_table = { - .scan = ir_codes_pixelview_new, - .size = ARRAY_SIZE(ir_codes_pixelview_new), -}; -EXPORT_SYMBOL_GPL(ir_codes_pixelview_new_table); - -static struct ir_scancode ir_codes_nebula[] = { - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x0a, KEY_TV }, - { 0x0b, KEY_AUX }, - { 0x0c, KEY_DVD }, - { 0x0d, KEY_POWER }, - { 0x0e, KEY_MHP }, /* labelled 'Picture' */ - { 0x0f, KEY_AUDIO }, - { 0x10, KEY_INFO }, - { 0x11, KEY_F13 }, /* 16:9 */ - { 0x12, KEY_F14 }, /* 14:9 */ - { 0x13, KEY_EPG }, - { 0x14, KEY_EXIT }, - { 0x15, KEY_MENU }, - { 0x16, KEY_UP }, - { 0x17, KEY_DOWN }, - { 0x18, KEY_LEFT }, - { 0x19, KEY_RIGHT }, - { 0x1a, KEY_ENTER }, - { 0x1b, KEY_CHANNELUP }, - { 0x1c, KEY_CHANNELDOWN }, - { 0x1d, KEY_VOLUMEUP }, - { 0x1e, KEY_VOLUMEDOWN }, - { 0x1f, KEY_RED }, - { 0x20, KEY_GREEN }, - { 0x21, KEY_YELLOW }, - { 0x22, KEY_BLUE }, - { 0x23, KEY_SUBTITLE }, - { 0x24, KEY_F15 }, /* AD */ - { 0x25, KEY_TEXT }, - { 0x26, KEY_MUTE }, - { 0x27, KEY_REWIND }, - { 0x28, KEY_STOP }, - { 0x29, KEY_PLAY }, - { 0x2a, KEY_FASTFORWARD }, - { 0x2b, KEY_F16 }, /* chapter */ - { 0x2c, KEY_PAUSE }, - { 0x2d, KEY_PLAY }, - { 0x2e, KEY_RECORD }, - { 0x2f, KEY_F17 }, /* picture in picture */ - { 0x30, KEY_KPPLUS }, /* zoom in */ - { 0x31, KEY_KPMINUS }, /* zoom out */ - { 0x32, KEY_F18 }, /* capture */ - { 0x33, KEY_F19 }, /* web */ - { 0x34, KEY_EMAIL }, - { 0x35, KEY_PHONE }, - { 0x36, KEY_PC }, -}; - -struct ir_scancode_table ir_codes_nebula_table = { - .scan = ir_codes_nebula, - .size = ARRAY_SIZE(ir_codes_nebula), -}; -EXPORT_SYMBOL_GPL(ir_codes_nebula_table); - -/* DigitalNow DNTV Live DVB-T Remote */ -static struct ir_scancode ir_codes_dntv_live_dvb_t[] = { - { 0x00, KEY_ESC }, /* 'go up a level?' */ - /* Keys 0 to 9 */ - { 0x0a, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x0b, KEY_TUNER }, /* tv/fm */ - { 0x0c, KEY_SEARCH }, /* scan */ - { 0x0d, KEY_STOP }, - { 0x0e, KEY_PAUSE }, - { 0x0f, KEY_LIST }, /* source */ - - { 0x10, KEY_MUTE }, - { 0x11, KEY_REWIND }, /* backward << */ - { 0x12, KEY_POWER }, - { 0x13, KEY_CAMERA }, /* snap */ - { 0x14, KEY_AUDIO }, /* stereo */ - { 0x15, KEY_CLEAR }, /* reset */ - { 0x16, KEY_PLAY }, - { 0x17, KEY_ENTER }, - { 0x18, KEY_ZOOM }, /* full screen */ - { 0x19, KEY_FASTFORWARD }, /* forward >> */ - { 0x1a, KEY_CHANNELUP }, - { 0x1b, KEY_VOLUMEUP }, - { 0x1c, KEY_INFO }, /* preview */ - { 0x1d, KEY_RECORD }, /* record */ - { 0x1e, KEY_CHANNELDOWN }, - { 0x1f, KEY_VOLUMEDOWN }, -}; - -struct ir_scancode_table ir_codes_dntv_live_dvb_t_table = { - .scan = ir_codes_dntv_live_dvb_t, - .size = ARRAY_SIZE(ir_codes_dntv_live_dvb_t), -}; -EXPORT_SYMBOL_GPL(ir_codes_dntv_live_dvb_t_table); - -/* ---------------------------------------------------------------------- */ - -/* IO-DATA BCTV7E Remote */ -static struct ir_scancode ir_codes_iodata_bctv7e[] = { - { 0x40, KEY_TV }, - { 0x20, KEY_RADIO }, /* FM */ - { 0x60, KEY_EPG }, - { 0x00, KEY_POWER }, - - /* Keys 0 to 9 */ - { 0x44, KEY_0 }, /* 10 */ - { 0x50, KEY_1 }, - { 0x30, KEY_2 }, - { 0x70, KEY_3 }, - { 0x48, KEY_4 }, - { 0x28, KEY_5 }, - { 0x68, KEY_6 }, - { 0x58, KEY_7 }, - { 0x38, KEY_8 }, - { 0x78, KEY_9 }, - - { 0x10, KEY_L }, /* Live */ - { 0x08, KEY_TIME }, /* Time Shift */ - - { 0x18, KEY_PLAYPAUSE }, /* Play */ - - { 0x24, KEY_ENTER }, /* 11 */ - { 0x64, KEY_ESC }, /* 12 */ - { 0x04, KEY_M }, /* Multi */ - - { 0x54, KEY_VIDEO }, - { 0x34, KEY_CHANNELUP }, - { 0x74, KEY_VOLUMEUP }, - { 0x14, KEY_MUTE }, - - { 0x4c, KEY_VCR }, /* SVIDEO */ - { 0x2c, KEY_CHANNELDOWN }, - { 0x6c, KEY_VOLUMEDOWN }, - { 0x0c, KEY_ZOOM }, - - { 0x5c, KEY_PAUSE }, - { 0x3c, KEY_RED }, /* || (red) */ - { 0x7c, KEY_RECORD }, /* recording */ - { 0x1c, KEY_STOP }, - - { 0x41, KEY_REWIND }, /* backward << */ - { 0x21, KEY_PLAY }, - { 0x61, KEY_FASTFORWARD }, /* forward >> */ - { 0x01, KEY_NEXT }, /* skip >| */ -}; - -struct ir_scancode_table ir_codes_iodata_bctv7e_table = { - .scan = ir_codes_iodata_bctv7e, - .size = ARRAY_SIZE(ir_codes_iodata_bctv7e), -}; -EXPORT_SYMBOL_GPL(ir_codes_iodata_bctv7e_table); - -/* ---------------------------------------------------------------------- */ - -/* ADS Tech Instant TV DVB-T PCI Remote */ -static struct ir_scancode ir_codes_adstech_dvb_t_pci[] = { - /* Keys 0 to 9 */ - { 0x4d, KEY_0 }, - { 0x57, KEY_1 }, - { 0x4f, KEY_2 }, - { 0x53, KEY_3 }, - { 0x56, KEY_4 }, - { 0x4e, KEY_5 }, - { 0x5e, KEY_6 }, - { 0x54, KEY_7 }, - { 0x4c, KEY_8 }, - { 0x5c, KEY_9 }, - - { 0x5b, KEY_POWER }, - { 0x5f, KEY_MUTE }, - { 0x55, KEY_GOTO }, - { 0x5d, KEY_SEARCH }, - { 0x17, KEY_EPG }, /* Guide */ - { 0x1f, KEY_MENU }, - { 0x0f, KEY_UP }, - { 0x46, KEY_DOWN }, - { 0x16, KEY_LEFT }, - { 0x1e, KEY_RIGHT }, - { 0x0e, KEY_SELECT }, /* Enter */ - { 0x5a, KEY_INFO }, - { 0x52, KEY_EXIT }, - { 0x59, KEY_PREVIOUS }, - { 0x51, KEY_NEXT }, - { 0x58, KEY_REWIND }, - { 0x50, KEY_FORWARD }, - { 0x44, KEY_PLAYPAUSE }, - { 0x07, KEY_STOP }, - { 0x1b, KEY_RECORD }, - { 0x13, KEY_TUNER }, /* Live */ - { 0x0a, KEY_A }, - { 0x12, KEY_B }, - { 0x03, KEY_PROG1 }, /* 1 */ - { 0x01, KEY_PROG2 }, /* 2 */ - { 0x00, KEY_PROG3 }, /* 3 */ - { 0x06, KEY_DVD }, - { 0x48, KEY_AUX }, /* Photo */ - { 0x40, KEY_VIDEO }, - { 0x19, KEY_AUDIO }, /* Music */ - { 0x0b, KEY_CHANNELUP }, - { 0x08, KEY_CHANNELDOWN }, - { 0x15, KEY_VOLUMEUP }, - { 0x1c, KEY_VOLUMEDOWN }, -}; - -struct ir_scancode_table ir_codes_adstech_dvb_t_pci_table = { - .scan = ir_codes_adstech_dvb_t_pci, - .size = ARRAY_SIZE(ir_codes_adstech_dvb_t_pci), -}; -EXPORT_SYMBOL_GPL(ir_codes_adstech_dvb_t_pci_table); - -/* ---------------------------------------------------------------------- */ - -/* MSI TV@nywhere MASTER remote */ - -static struct ir_scancode ir_codes_msi_tvanywhere[] = { - /* Keys 0 to 9 */ - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x0c, KEY_MUTE }, - { 0x0f, KEY_SCREEN }, /* Full Screen */ - { 0x10, KEY_FN }, /* Funtion */ - { 0x11, KEY_TIME }, /* Time shift */ - { 0x12, KEY_POWER }, - { 0x13, KEY_MEDIA }, /* MTS */ - { 0x14, KEY_SLOW }, - { 0x16, KEY_REWIND }, /* backward << */ - { 0x17, KEY_ENTER }, /* Return */ - { 0x18, KEY_FASTFORWARD }, /* forward >> */ - { 0x1a, KEY_CHANNELUP }, - { 0x1b, KEY_VOLUMEUP }, - { 0x1e, KEY_CHANNELDOWN }, - { 0x1f, KEY_VOLUMEDOWN }, -}; - -struct ir_scancode_table ir_codes_msi_tvanywhere_table = { - .scan = ir_codes_msi_tvanywhere, - .size = ARRAY_SIZE(ir_codes_msi_tvanywhere), -}; -EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_table); - -/* ---------------------------------------------------------------------- */ - -/* - Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card - is marked "KS003". The controller is I2C at address 0x30, but does not seem - to respond to probes until a read is performed from a valid device. - I don't know why... - - Note: This remote may be of similar or identical design to the - Pixelview remote (?). The raw codes and duplicate button codes - appear to be the same. - - Henry Wong <henry@stuffedcow.net> - Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com> - -*/ - -static struct ir_scancode ir_codes_msi_tvanywhere_plus[] = { - -/* ---- Remote Button Layout ---- - - POWER SOURCE SCAN MUTE - TV/FM 1 2 3 - |> 4 5 6 - <| 7 8 9 - ^^UP 0 + RECALL - vvDN RECORD STOP PLAY - - MINIMIZE ZOOM - - CH+ - VOL- VOL+ - CH- - - SNAPSHOT MTS - - << FUNC >> RESET -*/ - - { 0x01, KEY_1 }, /* 1 */ - { 0x0b, KEY_2 }, /* 2 */ - { 0x1b, KEY_3 }, /* 3 */ - { 0x05, KEY_4 }, /* 4 */ - { 0x09, KEY_5 }, /* 5 */ - { 0x15, KEY_6 }, /* 6 */ - { 0x06, KEY_7 }, /* 7 */ - { 0x0a, KEY_8 }, /* 8 */ - { 0x12, KEY_9 }, /* 9 */ - { 0x02, KEY_0 }, /* 0 */ - { 0x10, KEY_KPPLUS }, /* + */ - { 0x13, KEY_AGAIN }, /* Recall */ - - { 0x1e, KEY_POWER }, /* Power */ - { 0x07, KEY_TUNER }, /* Source */ - { 0x1c, KEY_SEARCH }, /* Scan */ - { 0x18, KEY_MUTE }, /* Mute */ - - { 0x03, KEY_RADIO }, /* TV/FM */ - /* The next four keys are duplicates that appear to send the - same IR code as Ch+, Ch-, >>, and << . The raw code assigned - to them is the actual code + 0x20 - they will never be - detected as such unless some way is discovered to distinguish - these buttons from those that have the same code. */ - { 0x3f, KEY_RIGHT }, /* |> and Ch+ */ - { 0x37, KEY_LEFT }, /* <| and Ch- */ - { 0x2c, KEY_UP }, /* ^^Up and >> */ - { 0x24, KEY_DOWN }, /* vvDn and << */ - - { 0x00, KEY_RECORD }, /* Record */ - { 0x08, KEY_STOP }, /* Stop */ - { 0x11, KEY_PLAY }, /* Play */ - - { 0x0f, KEY_CLOSE }, /* Minimize */ - { 0x19, KEY_ZOOM }, /* Zoom */ - { 0x1a, KEY_CAMERA }, /* Snapshot */ - { 0x0d, KEY_LANGUAGE }, /* MTS */ - - { 0x14, KEY_VOLUMEDOWN }, /* Vol- */ - { 0x16, KEY_VOLUMEUP }, /* Vol+ */ - { 0x17, KEY_CHANNELDOWN }, /* Ch- */ - { 0x1f, KEY_CHANNELUP }, /* Ch+ */ - - { 0x04, KEY_REWIND }, /* << */ - { 0x0e, KEY_MENU }, /* Function */ - { 0x0c, KEY_FASTFORWARD }, /* >> */ - { 0x1d, KEY_RESTART }, /* Reset */ -}; - -struct ir_scancode_table ir_codes_msi_tvanywhere_plus_table = { - .scan = ir_codes_msi_tvanywhere_plus, - .size = ARRAY_SIZE(ir_codes_msi_tvanywhere_plus), -}; -EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus_table); - -/* ---------------------------------------------------------------------- */ - -/* Cinergy 1400 DVB-T */ -static struct ir_scancode ir_codes_cinergy_1400[] = { - { 0x01, KEY_POWER }, - { 0x02, KEY_1 }, - { 0x03, KEY_2 }, - { 0x04, KEY_3 }, - { 0x05, KEY_4 }, - { 0x06, KEY_5 }, - { 0x07, KEY_6 }, - { 0x08, KEY_7 }, - { 0x09, KEY_8 }, - { 0x0a, KEY_9 }, - { 0x0c, KEY_0 }, - - { 0x0b, KEY_VIDEO }, - { 0x0d, KEY_REFRESH }, - { 0x0e, KEY_SELECT }, - { 0x0f, KEY_EPG }, - { 0x10, KEY_UP }, - { 0x11, KEY_LEFT }, - { 0x12, KEY_OK }, - { 0x13, KEY_RIGHT }, - { 0x14, KEY_DOWN }, - { 0x15, KEY_TEXT }, - { 0x16, KEY_INFO }, - - { 0x17, KEY_RED }, - { 0x18, KEY_GREEN }, - { 0x19, KEY_YELLOW }, - { 0x1a, KEY_BLUE }, - - { 0x1b, KEY_CHANNELUP }, - { 0x1c, KEY_VOLUMEUP }, - { 0x1d, KEY_MUTE }, - { 0x1e, KEY_VOLUMEDOWN }, - { 0x1f, KEY_CHANNELDOWN }, - - { 0x40, KEY_PAUSE }, - { 0x4c, KEY_PLAY }, - { 0x58, KEY_RECORD }, - { 0x54, KEY_PREVIOUS }, - { 0x48, KEY_STOP }, - { 0x5c, KEY_NEXT }, -}; - -struct ir_scancode_table ir_codes_cinergy_1400_table = { - .scan = ir_codes_cinergy_1400, - .size = ARRAY_SIZE(ir_codes_cinergy_1400), -}; -EXPORT_SYMBOL_GPL(ir_codes_cinergy_1400_table); - -/* ---------------------------------------------------------------------- */ - -/* AVERTV STUDIO 303 Remote */ -static struct ir_scancode ir_codes_avertv_303[] = { - { 0x2a, KEY_1 }, - { 0x32, KEY_2 }, - { 0x3a, KEY_3 }, - { 0x4a, KEY_4 }, - { 0x52, KEY_5 }, - { 0x5a, KEY_6 }, - { 0x6a, KEY_7 }, - { 0x72, KEY_8 }, - { 0x7a, KEY_9 }, - { 0x0e, KEY_0 }, - - { 0x02, KEY_POWER }, - { 0x22, KEY_VIDEO }, - { 0x42, KEY_AUDIO }, - { 0x62, KEY_ZOOM }, - { 0x0a, KEY_TV }, - { 0x12, KEY_CD }, - { 0x1a, KEY_TEXT }, - - { 0x16, KEY_SUBTITLE }, - { 0x1e, KEY_REWIND }, - { 0x06, KEY_PRINT }, - - { 0x2e, KEY_SEARCH }, - { 0x36, KEY_SLEEP }, - { 0x3e, KEY_SHUFFLE }, - { 0x26, KEY_MUTE }, - - { 0x4e, KEY_RECORD }, - { 0x56, KEY_PAUSE }, - { 0x5e, KEY_STOP }, - { 0x46, KEY_PLAY }, - - { 0x6e, KEY_RED }, - { 0x0b, KEY_GREEN }, - { 0x66, KEY_YELLOW }, - { 0x03, KEY_BLUE }, - - { 0x76, KEY_LEFT }, - { 0x7e, KEY_RIGHT }, - { 0x13, KEY_DOWN }, - { 0x1b, KEY_UP }, -}; - -struct ir_scancode_table ir_codes_avertv_303_table = { - .scan = ir_codes_avertv_303, - .size = ARRAY_SIZE(ir_codes_avertv_303), -}; -EXPORT_SYMBOL_GPL(ir_codes_avertv_303_table); - -/* ---------------------------------------------------------------------- */ - -/* DigitalNow DNTV Live! DVB-T Pro Remote */ -static struct ir_scancode ir_codes_dntv_live_dvbt_pro[] = { - { 0x16, KEY_POWER }, - { 0x5b, KEY_HOME }, - - { 0x55, KEY_TV }, /* live tv */ - { 0x58, KEY_TUNER }, /* digital Radio */ - { 0x5a, KEY_RADIO }, /* FM radio */ - { 0x59, KEY_DVD }, /* dvd menu */ - { 0x03, KEY_1 }, - { 0x01, KEY_2 }, - { 0x06, KEY_3 }, - { 0x09, KEY_4 }, - { 0x1d, KEY_5 }, - { 0x1f, KEY_6 }, - { 0x0d, KEY_7 }, - { 0x19, KEY_8 }, - { 0x1b, KEY_9 }, - { 0x0c, KEY_CANCEL }, - { 0x15, KEY_0 }, - { 0x4a, KEY_CLEAR }, - { 0x13, KEY_BACK }, - { 0x00, KEY_TAB }, - { 0x4b, KEY_UP }, - { 0x4e, KEY_LEFT }, - { 0x4f, KEY_OK }, - { 0x52, KEY_RIGHT }, - { 0x51, KEY_DOWN }, - { 0x1e, KEY_VOLUMEUP }, - { 0x0a, KEY_VOLUMEDOWN }, - { 0x02, KEY_CHANNELDOWN }, - { 0x05, KEY_CHANNELUP }, - { 0x11, KEY_RECORD }, - { 0x14, KEY_PLAY }, - { 0x4c, KEY_PAUSE }, - { 0x1a, KEY_STOP }, - { 0x40, KEY_REWIND }, - { 0x12, KEY_FASTFORWARD }, - { 0x41, KEY_PREVIOUSSONG }, /* replay |< */ - { 0x42, KEY_NEXTSONG }, /* skip >| */ - { 0x54, KEY_CAMERA }, /* capture */ - { 0x50, KEY_LANGUAGE }, /* sap */ - { 0x47, KEY_TV2 }, /* pip */ - { 0x4d, KEY_SCREEN }, - { 0x43, KEY_SUBTITLE }, - { 0x10, KEY_MUTE }, - { 0x49, KEY_AUDIO }, /* l/r */ - { 0x07, KEY_SLEEP }, - { 0x08, KEY_VIDEO }, /* a/v */ - { 0x0e, KEY_PREVIOUS }, /* recall */ - { 0x45, KEY_ZOOM }, /* zoom + */ - { 0x46, KEY_ANGLE }, /* zoom - */ - { 0x56, KEY_RED }, - { 0x57, KEY_GREEN }, - { 0x5c, KEY_YELLOW }, - { 0x5d, KEY_BLUE }, -}; - -struct ir_scancode_table ir_codes_dntv_live_dvbt_pro_table = { - .scan = ir_codes_dntv_live_dvbt_pro, - .size = ARRAY_SIZE(ir_codes_dntv_live_dvbt_pro), -}; -EXPORT_SYMBOL_GPL(ir_codes_dntv_live_dvbt_pro_table); - -static struct ir_scancode ir_codes_em_terratec[] = { - { 0x01, KEY_CHANNEL }, - { 0x02, KEY_SELECT }, - { 0x03, KEY_MUTE }, - { 0x04, KEY_POWER }, - { 0x05, KEY_1 }, - { 0x06, KEY_2 }, - { 0x07, KEY_3 }, - { 0x08, KEY_CHANNELUP }, - { 0x09, KEY_4 }, - { 0x0a, KEY_5 }, - { 0x0b, KEY_6 }, - { 0x0c, KEY_CHANNELDOWN }, - { 0x0d, KEY_7 }, - { 0x0e, KEY_8 }, - { 0x0f, KEY_9 }, - { 0x10, KEY_VOLUMEUP }, - { 0x11, KEY_0 }, - { 0x12, KEY_MENU }, - { 0x13, KEY_PRINT }, - { 0x14, KEY_VOLUMEDOWN }, - { 0x16, KEY_PAUSE }, - { 0x18, KEY_RECORD }, - { 0x19, KEY_REWIND }, - { 0x1a, KEY_PLAY }, - { 0x1b, KEY_FORWARD }, - { 0x1c, KEY_BACKSPACE }, - { 0x1e, KEY_STOP }, - { 0x40, KEY_ZOOM }, -}; - -struct ir_scancode_table ir_codes_em_terratec_table = { - .scan = ir_codes_em_terratec, - .size = ARRAY_SIZE(ir_codes_em_terratec), -}; -EXPORT_SYMBOL_GPL(ir_codes_em_terratec_table); - -static struct ir_scancode ir_codes_pinnacle_grey[] = { - { 0x3a, KEY_0 }, - { 0x31, KEY_1 }, - { 0x32, KEY_2 }, - { 0x33, KEY_3 }, - { 0x34, KEY_4 }, - { 0x35, KEY_5 }, - { 0x36, KEY_6 }, - { 0x37, KEY_7 }, - { 0x38, KEY_8 }, - { 0x39, KEY_9 }, - - { 0x2f, KEY_POWER }, - - { 0x2e, KEY_P }, - { 0x1f, KEY_L }, - { 0x2b, KEY_I }, - - { 0x2d, KEY_SCREEN }, - { 0x1e, KEY_ZOOM }, - { 0x1b, KEY_VOLUMEUP }, - { 0x0f, KEY_VOLUMEDOWN }, - { 0x17, KEY_CHANNELUP }, - { 0x1c, KEY_CHANNELDOWN }, - { 0x25, KEY_INFO }, - - { 0x3c, KEY_MUTE }, - - { 0x3d, KEY_LEFT }, - { 0x3b, KEY_RIGHT }, - - { 0x3f, KEY_UP }, - { 0x3e, KEY_DOWN }, - { 0x1a, KEY_ENTER }, - - { 0x1d, KEY_MENU }, - { 0x19, KEY_AGAIN }, - { 0x16, KEY_PREVIOUSSONG }, - { 0x13, KEY_NEXTSONG }, - { 0x15, KEY_PAUSE }, - { 0x0e, KEY_REWIND }, - { 0x0d, KEY_PLAY }, - { 0x0b, KEY_STOP }, - { 0x07, KEY_FORWARD }, - { 0x27, KEY_RECORD }, - { 0x26, KEY_TUNER }, - { 0x29, KEY_TEXT }, - { 0x2a, KEY_MEDIA }, - { 0x18, KEY_EPG }, -}; - -struct ir_scancode_table ir_codes_pinnacle_grey_table = { - .scan = ir_codes_pinnacle_grey, - .size = ARRAY_SIZE(ir_codes_pinnacle_grey), -}; -EXPORT_SYMBOL_GPL(ir_codes_pinnacle_grey_table); - -static struct ir_scancode ir_codes_flyvideo[] = { - { 0x0f, KEY_0 }, - { 0x03, KEY_1 }, - { 0x04, KEY_2 }, - { 0x05, KEY_3 }, - { 0x07, KEY_4 }, - { 0x08, KEY_5 }, - { 0x09, KEY_6 }, - { 0x0b, KEY_7 }, - { 0x0c, KEY_8 }, - { 0x0d, KEY_9 }, - - { 0x0e, KEY_MODE }, /* Air/Cable */ - { 0x11, KEY_VIDEO }, /* Video */ - { 0x15, KEY_AUDIO }, /* Audio */ - { 0x00, KEY_POWER }, /* Power */ - { 0x18, KEY_TUNER }, /* AV Source */ - { 0x02, KEY_ZOOM }, /* Fullscreen */ - { 0x1a, KEY_LANGUAGE }, /* Stereo */ - { 0x1b, KEY_MUTE }, /* Mute */ - { 0x14, KEY_VOLUMEUP }, /* Volume + */ - { 0x17, KEY_VOLUMEDOWN },/* Volume - */ - { 0x12, KEY_CHANNELUP },/* Channel + */ - { 0x13, KEY_CHANNELDOWN },/* Channel - */ - { 0x06, KEY_AGAIN }, /* Recall */ - { 0x10, KEY_ENTER }, /* Enter */ - - { 0x19, KEY_BACK }, /* Rewind ( <<< ) */ - { 0x1f, KEY_FORWARD }, /* Forward ( >>> ) */ - { 0x0a, KEY_ANGLE }, /* no label, may be used as the PAUSE button */ -}; - -struct ir_scancode_table ir_codes_flyvideo_table = { - .scan = ir_codes_flyvideo, - .size = ARRAY_SIZE(ir_codes_flyvideo), -}; -EXPORT_SYMBOL_GPL(ir_codes_flyvideo_table); - -static struct ir_scancode ir_codes_flydvb[] = { - { 0x01, KEY_ZOOM }, /* Full Screen */ - { 0x00, KEY_POWER }, /* Power */ - - { 0x03, KEY_1 }, - { 0x04, KEY_2 }, - { 0x05, KEY_3 }, - { 0x07, KEY_4 }, - { 0x08, KEY_5 }, - { 0x09, KEY_6 }, - { 0x0b, KEY_7 }, - { 0x0c, KEY_8 }, - { 0x0d, KEY_9 }, - { 0x06, KEY_AGAIN }, /* Recall */ - { 0x0f, KEY_0 }, - { 0x10, KEY_MUTE }, /* Mute */ - { 0x02, KEY_RADIO }, /* TV/Radio */ - { 0x1b, KEY_LANGUAGE }, /* SAP (Second Audio Program) */ - - { 0x14, KEY_VOLUMEUP }, /* VOL+ */ - { 0x17, KEY_VOLUMEDOWN }, /* VOL- */ - { 0x12, KEY_CHANNELUP }, /* CH+ */ - { 0x13, KEY_CHANNELDOWN }, /* CH- */ - { 0x1d, KEY_ENTER }, /* Enter */ - - { 0x1a, KEY_MODE }, /* PIP */ - { 0x18, KEY_TUNER }, /* Source */ - - { 0x1e, KEY_RECORD }, /* Record/Pause */ - { 0x15, KEY_ANGLE }, /* Swap (no label on key) */ - { 0x1c, KEY_PAUSE }, /* Timeshift/Pause */ - { 0x19, KEY_BACK }, /* Rewind << */ - { 0x0a, KEY_PLAYPAUSE }, /* Play/Pause */ - { 0x1f, KEY_FORWARD }, /* Forward >> */ - { 0x16, KEY_PREVIOUS }, /* Back |<< */ - { 0x11, KEY_STOP }, /* Stop */ - { 0x0e, KEY_NEXT }, /* End >>| */ -}; - -struct ir_scancode_table ir_codes_flydvb_table = { - .scan = ir_codes_flydvb, - .size = ARRAY_SIZE(ir_codes_flydvb), -}; -EXPORT_SYMBOL_GPL(ir_codes_flydvb_table); - -static struct ir_scancode ir_codes_cinergy[] = { - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x0a, KEY_POWER }, - { 0x0b, KEY_PROG1 }, /* app */ - { 0x0c, KEY_ZOOM }, /* zoom/fullscreen */ - { 0x0d, KEY_CHANNELUP }, /* channel */ - { 0x0e, KEY_CHANNELDOWN }, /* channel- */ - { 0x0f, KEY_VOLUMEUP }, - { 0x10, KEY_VOLUMEDOWN }, - { 0x11, KEY_TUNER }, /* AV */ - { 0x12, KEY_NUMLOCK }, /* -/-- */ - { 0x13, KEY_AUDIO }, /* audio */ - { 0x14, KEY_MUTE }, - { 0x15, KEY_UP }, - { 0x16, KEY_DOWN }, - { 0x17, KEY_LEFT }, - { 0x18, KEY_RIGHT }, - { 0x19, BTN_LEFT, }, - { 0x1a, BTN_RIGHT, }, - { 0x1b, KEY_WWW }, /* text */ - { 0x1c, KEY_REWIND }, - { 0x1d, KEY_FORWARD }, - { 0x1e, KEY_RECORD }, - { 0x1f, KEY_PLAY }, - { 0x20, KEY_PREVIOUSSONG }, - { 0x21, KEY_NEXTSONG }, - { 0x22, KEY_PAUSE }, - { 0x23, KEY_STOP }, -}; - -struct ir_scancode_table ir_codes_cinergy_table = { - .scan = ir_codes_cinergy, - .size = ARRAY_SIZE(ir_codes_cinergy), -}; -EXPORT_SYMBOL_GPL(ir_codes_cinergy_table); - -/* Alfons Geser <a.geser@cox.net> - * updates from Job D. R. Borges <jobdrb@ig.com.br> */ -static struct ir_scancode ir_codes_eztv[] = { - { 0x12, KEY_POWER }, - { 0x01, KEY_TV }, /* DVR */ - { 0x15, KEY_DVD }, /* DVD */ - { 0x17, KEY_AUDIO }, /* music */ - /* DVR mode / DVD mode / music mode */ - - { 0x1b, KEY_MUTE }, /* mute */ - { 0x02, KEY_LANGUAGE }, /* MTS/SAP / audio / autoseek */ - { 0x1e, KEY_SUBTITLE }, /* closed captioning / subtitle / seek */ - { 0x16, KEY_ZOOM }, /* full screen */ - { 0x1c, KEY_VIDEO }, /* video source / eject / delall */ - { 0x1d, KEY_RESTART }, /* playback / angle / del */ - { 0x2f, KEY_SEARCH }, /* scan / menu / playlist */ - { 0x30, KEY_CHANNEL }, /* CH surfing / bookmark / memo */ - - { 0x31, KEY_HELP }, /* help */ - { 0x32, KEY_MODE }, /* num/memo */ - { 0x33, KEY_ESC }, /* cancel */ - - { 0x0c, KEY_UP }, /* up */ - { 0x10, KEY_DOWN }, /* down */ - { 0x08, KEY_LEFT }, /* left */ - { 0x04, KEY_RIGHT }, /* right */ - { 0x03, KEY_SELECT }, /* select */ - - { 0x1f, KEY_REWIND }, /* rewind */ - { 0x20, KEY_PLAYPAUSE },/* play/pause */ - { 0x29, KEY_FORWARD }, /* forward */ - { 0x14, KEY_AGAIN }, /* repeat */ - { 0x2b, KEY_RECORD }, /* recording */ - { 0x2c, KEY_STOP }, /* stop */ - { 0x2d, KEY_PLAY }, /* play */ - { 0x2e, KEY_CAMERA }, /* snapshot / shuffle */ - - { 0x00, KEY_0 }, - { 0x05, KEY_1 }, - { 0x06, KEY_2 }, - { 0x07, KEY_3 }, - { 0x09, KEY_4 }, - { 0x0a, KEY_5 }, - { 0x0b, KEY_6 }, - { 0x0d, KEY_7 }, - { 0x0e, KEY_8 }, - { 0x0f, KEY_9 }, - - { 0x2a, KEY_VOLUMEUP }, - { 0x11, KEY_VOLUMEDOWN }, - { 0x18, KEY_CHANNELUP },/* CH.tracking up */ - { 0x19, KEY_CHANNELDOWN },/* CH.tracking down */ - - { 0x13, KEY_ENTER }, /* enter */ - { 0x21, KEY_DOT }, /* . (decimal dot) */ -}; - -struct ir_scancode_table ir_codes_eztv_table = { - .scan = ir_codes_eztv, - .size = ARRAY_SIZE(ir_codes_eztv), -}; -EXPORT_SYMBOL_GPL(ir_codes_eztv_table); - -/* Alex Hermann <gaaf@gmx.net> */ -static struct ir_scancode ir_codes_avermedia[] = { - { 0x28, KEY_1 }, - { 0x18, KEY_2 }, - { 0x38, KEY_3 }, - { 0x24, KEY_4 }, - { 0x14, KEY_5 }, - { 0x34, KEY_6 }, - { 0x2c, KEY_7 }, - { 0x1c, KEY_8 }, - { 0x3c, KEY_9 }, - { 0x22, KEY_0 }, - - { 0x20, KEY_TV }, /* TV/FM */ - { 0x10, KEY_CD }, /* CD */ - { 0x30, KEY_TEXT }, /* TELETEXT */ - { 0x00, KEY_POWER }, /* POWER */ - - { 0x08, KEY_VIDEO }, /* VIDEO */ - { 0x04, KEY_AUDIO }, /* AUDIO */ - { 0x0c, KEY_ZOOM }, /* FULL SCREEN */ - - { 0x12, KEY_SUBTITLE }, /* DISPLAY */ - { 0x32, KEY_REWIND }, /* LOOP */ - { 0x02, KEY_PRINT }, /* PREVIEW */ - - { 0x2a, KEY_SEARCH }, /* AUTOSCAN */ - { 0x1a, KEY_SLEEP }, /* FREEZE */ - { 0x3a, KEY_CAMERA }, /* SNAPSHOT */ - { 0x0a, KEY_MUTE }, /* MUTE */ - - { 0x26, KEY_RECORD }, /* RECORD */ - { 0x16, KEY_PAUSE }, /* PAUSE */ - { 0x36, KEY_STOP }, /* STOP */ - { 0x06, KEY_PLAY }, /* PLAY */ - - { 0x2e, KEY_RED }, /* RED */ - { 0x21, KEY_GREEN }, /* GREEN */ - { 0x0e, KEY_YELLOW }, /* YELLOW */ - { 0x01, KEY_BLUE }, /* BLUE */ - - { 0x1e, KEY_VOLUMEDOWN }, /* VOLUME- */ - { 0x3e, KEY_VOLUMEUP }, /* VOLUME+ */ - { 0x11, KEY_CHANNELDOWN }, /* CHANNEL/PAGE- */ - { 0x31, KEY_CHANNELUP } /* CHANNEL/PAGE+ */ -}; - -struct ir_scancode_table ir_codes_avermedia_table = { - .scan = ir_codes_avermedia, - .size = ARRAY_SIZE(ir_codes_avermedia), -}; -EXPORT_SYMBOL_GPL(ir_codes_avermedia_table); - -static struct ir_scancode ir_codes_videomate_tv_pvr[] = { - { 0x14, KEY_MUTE }, - { 0x24, KEY_ZOOM }, - - { 0x01, KEY_DVD }, - { 0x23, KEY_RADIO }, - { 0x00, KEY_TV }, - - { 0x0a, KEY_REWIND }, - { 0x08, KEY_PLAYPAUSE }, - { 0x0f, KEY_FORWARD }, - - { 0x02, KEY_PREVIOUS }, - { 0x07, KEY_STOP }, - { 0x06, KEY_NEXT }, - - { 0x0c, KEY_UP }, - { 0x0e, KEY_DOWN }, - { 0x0b, KEY_LEFT }, - { 0x0d, KEY_RIGHT }, - { 0x11, KEY_OK }, - - { 0x03, KEY_MENU }, - { 0x09, KEY_SETUP }, - { 0x05, KEY_VIDEO }, - { 0x22, KEY_CHANNEL }, - - { 0x12, KEY_VOLUMEUP }, - { 0x15, KEY_VOLUMEDOWN }, - { 0x10, KEY_CHANNELUP }, - { 0x13, KEY_CHANNELDOWN }, - - { 0x04, KEY_RECORD }, - - { 0x16, KEY_1 }, - { 0x17, KEY_2 }, - { 0x18, KEY_3 }, - { 0x19, KEY_4 }, - { 0x1a, KEY_5 }, - { 0x1b, KEY_6 }, - { 0x1c, KEY_7 }, - { 0x1d, KEY_8 }, - { 0x1e, KEY_9 }, - { 0x1f, KEY_0 }, - - { 0x20, KEY_LANGUAGE }, - { 0x21, KEY_SLEEP }, -}; - -struct ir_scancode_table ir_codes_videomate_tv_pvr_table = { - .scan = ir_codes_videomate_tv_pvr, - .size = ARRAY_SIZE(ir_codes_videomate_tv_pvr), -}; -EXPORT_SYMBOL_GPL(ir_codes_videomate_tv_pvr_table); - -/* Michael Tokarev <mjt@tls.msk.ru> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg - keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at - least, and probably other cards too. - The "ascii-art picture" below (in comments, first row - is the keycode in hex, and subsequent row(s) shows - the button labels (several variants when appropriate) - helps to descide which keycodes to assign to the buttons. - */ -static struct ir_scancode ir_codes_manli[] = { - - /* 0x1c 0x12 * - * FUNCTION POWER * - * FM (|) * - * */ - { 0x1c, KEY_RADIO }, /*XXX*/ - { 0x12, KEY_POWER }, - - /* 0x01 0x02 0x03 * - * 1 2 3 * - * * - * 0x04 0x05 0x06 * - * 4 5 6 * - * * - * 0x07 0x08 0x09 * - * 7 8 9 * - * */ - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - /* 0x0a 0x00 0x17 * - * RECALL 0 +100 * - * PLUS * - * */ - { 0x0a, KEY_AGAIN }, /*XXX KEY_REWIND? */ - { 0x00, KEY_0 }, - { 0x17, KEY_DIGITS }, /*XXX*/ - - /* 0x14 0x10 * - * MENU INFO * - * OSD */ - { 0x14, KEY_MENU }, - { 0x10, KEY_INFO }, - - /* 0x0b * - * Up * - * * - * 0x18 0x16 0x0c * - * Left Ok Right * - * * - * 0x015 * - * Down * - * */ - { 0x0b, KEY_UP }, - { 0x18, KEY_LEFT }, - { 0x16, KEY_OK }, /*XXX KEY_SELECT? KEY_ENTER? */ - { 0x0c, KEY_RIGHT }, - { 0x15, KEY_DOWN }, - - /* 0x11 0x0d * - * TV/AV MODE * - * SOURCE STEREO * - * */ - { 0x11, KEY_TV }, /*XXX*/ - { 0x0d, KEY_MODE }, /*XXX there's no KEY_STEREO */ - - /* 0x0f 0x1b 0x1a * - * AUDIO Vol+ Chan+ * - * TIMESHIFT??? * - * * - * 0x0e 0x1f 0x1e * - * SLEEP Vol- Chan- * - * */ - { 0x0f, KEY_AUDIO }, - { 0x1b, KEY_VOLUMEUP }, - { 0x1a, KEY_CHANNELUP }, - { 0x0e, KEY_TIME }, - { 0x1f, KEY_VOLUMEDOWN }, - { 0x1e, KEY_CHANNELDOWN }, - - /* 0x13 0x19 * - * MUTE SNAPSHOT* - * */ - { 0x13, KEY_MUTE }, - { 0x19, KEY_CAMERA }, - - /* 0x1d unused ? */ -}; - -struct ir_scancode_table ir_codes_manli_table = { - .scan = ir_codes_manli, - .size = ARRAY_SIZE(ir_codes_manli), -}; -EXPORT_SYMBOL_GPL(ir_codes_manli_table); - -/* Mike Baikov <mike@baikov.com> */ -static struct ir_scancode ir_codes_gotview7135[] = { - - { 0x11, KEY_POWER }, - { 0x35, KEY_TV }, - { 0x1b, KEY_0 }, - { 0x29, KEY_1 }, - { 0x19, KEY_2 }, - { 0x39, KEY_3 }, - { 0x1f, KEY_4 }, - { 0x2c, KEY_5 }, - { 0x21, KEY_6 }, - { 0x24, KEY_7 }, - { 0x18, KEY_8 }, - { 0x2b, KEY_9 }, - { 0x3b, KEY_AGAIN }, /* LOOP */ - { 0x06, KEY_AUDIO }, - { 0x31, KEY_PRINT }, /* PREVIEW */ - { 0x3e, KEY_VIDEO }, - { 0x10, KEY_CHANNELUP }, - { 0x20, KEY_CHANNELDOWN }, - { 0x0c, KEY_VOLUMEDOWN }, - { 0x28, KEY_VOLUMEUP }, - { 0x08, KEY_MUTE }, - { 0x26, KEY_SEARCH }, /* SCAN */ - { 0x3f, KEY_CAMERA }, /* SNAPSHOT */ - { 0x12, KEY_RECORD }, - { 0x32, KEY_STOP }, - { 0x3c, KEY_PLAY }, - { 0x1d, KEY_REWIND }, - { 0x2d, KEY_PAUSE }, - { 0x0d, KEY_FORWARD }, - { 0x05, KEY_ZOOM }, /*FULL*/ - - { 0x2a, KEY_F21 }, /* LIVE TIMESHIFT */ - { 0x0e, KEY_F22 }, /* MIN TIMESHIFT */ - { 0x1e, KEY_TIME }, /* TIMESHIFT */ - { 0x38, KEY_F24 }, /* NORMAL TIMESHIFT */ -}; - -struct ir_scancode_table ir_codes_gotview7135_table = { - .scan = ir_codes_gotview7135, - .size = ARRAY_SIZE(ir_codes_gotview7135), -}; -EXPORT_SYMBOL_GPL(ir_codes_gotview7135_table); - -static struct ir_scancode ir_codes_purpletv[] = { - { 0x03, KEY_POWER }, - { 0x6f, KEY_MUTE }, - { 0x10, KEY_BACKSPACE }, /* Recall */ - - { 0x11, KEY_0 }, - { 0x04, KEY_1 }, - { 0x05, KEY_2 }, - { 0x06, KEY_3 }, - { 0x08, KEY_4 }, - { 0x09, KEY_5 }, - { 0x0a, KEY_6 }, - { 0x0c, KEY_7 }, - { 0x0d, KEY_8 }, - { 0x0e, KEY_9 }, - { 0x12, KEY_DOT }, /* 100+ */ - - { 0x07, KEY_VOLUMEUP }, - { 0x0b, KEY_VOLUMEDOWN }, - { 0x1a, KEY_KPPLUS }, - { 0x18, KEY_KPMINUS }, - { 0x15, KEY_UP }, - { 0x1d, KEY_DOWN }, - { 0x0f, KEY_CHANNELUP }, - { 0x13, KEY_CHANNELDOWN }, - { 0x48, KEY_ZOOM }, - - { 0x1b, KEY_VIDEO }, /* Video source */ - { 0x1f, KEY_CAMERA }, /* Snapshot */ - { 0x49, KEY_LANGUAGE }, /* MTS Select */ - { 0x19, KEY_SEARCH }, /* Auto Scan */ - - { 0x4b, KEY_RECORD }, - { 0x46, KEY_PLAY }, - { 0x45, KEY_PAUSE }, /* Pause */ - { 0x44, KEY_STOP }, - { 0x43, KEY_TIME }, /* Time Shift */ - { 0x17, KEY_CHANNEL }, /* SURF CH */ - { 0x40, KEY_FORWARD }, /* Forward ? */ - { 0x42, KEY_REWIND }, /* Backward ? */ - -}; - -struct ir_scancode_table ir_codes_purpletv_table = { - .scan = ir_codes_purpletv, - .size = ARRAY_SIZE(ir_codes_purpletv), -}; -EXPORT_SYMBOL_GPL(ir_codes_purpletv_table); - -/* Mapping for the 28 key remote control as seen at - http://www.sednacomputer.com/photo/cardbus-tv.jpg - Pavel Mihaylov <bin@bash.info> - Also for the remote bundled with Kozumi KTV-01C card */ -static struct ir_scancode ir_codes_pctv_sedna[] = { - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x0a, KEY_AGAIN }, /* Recall */ - { 0x0b, KEY_CHANNELUP }, - { 0x0c, KEY_VOLUMEUP }, - { 0x0d, KEY_MODE }, /* Stereo */ - { 0x0e, KEY_STOP }, - { 0x0f, KEY_PREVIOUSSONG }, - { 0x10, KEY_ZOOM }, - { 0x11, KEY_TUNER }, /* Source */ - { 0x12, KEY_POWER }, - { 0x13, KEY_MUTE }, - { 0x15, KEY_CHANNELDOWN }, - { 0x18, KEY_VOLUMEDOWN }, - { 0x19, KEY_CAMERA }, /* Snapshot */ - { 0x1a, KEY_NEXTSONG }, - { 0x1b, KEY_TIME }, /* Time Shift */ - { 0x1c, KEY_RADIO }, /* FM Radio */ - { 0x1d, KEY_RECORD }, - { 0x1e, KEY_PAUSE }, - /* additional codes for Kozumi's remote */ - { 0x14, KEY_INFO }, /* OSD */ - { 0x16, KEY_OK }, /* OK */ - { 0x17, KEY_DIGITS }, /* Plus */ - { 0x1f, KEY_PLAY }, /* Play */ -}; - -struct ir_scancode_table ir_codes_pctv_sedna_table = { - .scan = ir_codes_pctv_sedna, - .size = ARRAY_SIZE(ir_codes_pctv_sedna), -}; -EXPORT_SYMBOL_GPL(ir_codes_pctv_sedna_table); - -/* Mark Phalan <phalanm@o2.ie> */ -static struct ir_scancode ir_codes_pv951[] = { - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x12, KEY_POWER }, - { 0x10, KEY_MUTE }, - { 0x1f, KEY_VOLUMEDOWN }, - { 0x1b, KEY_VOLUMEUP }, - { 0x1a, KEY_CHANNELUP }, - { 0x1e, KEY_CHANNELDOWN }, - { 0x0e, KEY_PAGEUP }, - { 0x1d, KEY_PAGEDOWN }, - { 0x13, KEY_SOUND }, - - { 0x18, KEY_KPPLUSMINUS }, /* CH +/- */ - { 0x16, KEY_SUBTITLE }, /* CC */ - { 0x0d, KEY_TEXT }, /* TTX */ - { 0x0b, KEY_TV }, /* AIR/CBL */ - { 0x11, KEY_PC }, /* PC/TV */ - { 0x17, KEY_OK }, /* CH RTN */ - { 0x19, KEY_MODE }, /* FUNC */ - { 0x0c, KEY_SEARCH }, /* AUTOSCAN */ - - /* Not sure what to do with these ones! */ - { 0x0f, KEY_SELECT }, /* SOURCE */ - { 0x0a, KEY_KPPLUS }, /* +100 */ - { 0x14, KEY_EQUAL }, /* SYNC */ - { 0x1c, KEY_MEDIA }, /* PC/TV */ -}; - -struct ir_scancode_table ir_codes_pv951_table = { - .scan = ir_codes_pv951, - .size = ARRAY_SIZE(ir_codes_pv951), -}; -EXPORT_SYMBOL_GPL(ir_codes_pv951_table); - -/* generic RC5 keytable */ -/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */ -/* used by old (black) Hauppauge remotes */ -static struct ir_scancode ir_codes_rc5_tv[] = { - /* Keys 0 to 9 */ - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x0b, KEY_CHANNEL }, /* channel / program (japan: 11) */ - { 0x0c, KEY_POWER }, /* standby */ - { 0x0d, KEY_MUTE }, /* mute / demute */ - { 0x0f, KEY_TV }, /* display */ - { 0x10, KEY_VOLUMEUP }, - { 0x11, KEY_VOLUMEDOWN }, - { 0x12, KEY_BRIGHTNESSUP }, - { 0x13, KEY_BRIGHTNESSDOWN }, - { 0x1e, KEY_SEARCH }, /* search + */ - { 0x20, KEY_CHANNELUP }, /* channel / program + */ - { 0x21, KEY_CHANNELDOWN }, /* channel / program - */ - { 0x22, KEY_CHANNEL }, /* alt / channel */ - { 0x23, KEY_LANGUAGE }, /* 1st / 2nd language */ - { 0x26, KEY_SLEEP }, /* sleeptimer */ - { 0x2e, KEY_MENU }, /* 2nd controls (USA: menu) */ - { 0x30, KEY_PAUSE }, - { 0x32, KEY_REWIND }, - { 0x33, KEY_GOTO }, - { 0x35, KEY_PLAY }, - { 0x36, KEY_STOP }, - { 0x37, KEY_RECORD }, /* recording */ - { 0x3c, KEY_TEXT }, /* teletext submode (Japan: 12) */ - { 0x3d, KEY_SUSPEND }, /* system standby */ - -}; - -struct ir_scancode_table ir_codes_rc5_tv_table = { - .scan = ir_codes_rc5_tv, - .size = ARRAY_SIZE(ir_codes_rc5_tv), -}; -EXPORT_SYMBOL_GPL(ir_codes_rc5_tv_table); - -/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */ -static struct ir_scancode ir_codes_winfast[] = { - /* Keys 0 to 9 */ - { 0x12, KEY_0 }, - { 0x05, KEY_1 }, - { 0x06, KEY_2 }, - { 0x07, KEY_3 }, - { 0x09, KEY_4 }, - { 0x0a, KEY_5 }, - { 0x0b, KEY_6 }, - { 0x0d, KEY_7 }, - { 0x0e, KEY_8 }, - { 0x0f, KEY_9 }, - - { 0x00, KEY_POWER }, - { 0x1b, KEY_AUDIO }, /* Audio Source */ - { 0x02, KEY_TUNER }, /* TV/FM, not on Y0400052 */ - { 0x1e, KEY_VIDEO }, /* Video Source */ - { 0x16, KEY_INFO }, /* Display information */ - { 0x04, KEY_VOLUMEUP }, - { 0x08, KEY_VOLUMEDOWN }, - { 0x0c, KEY_CHANNELUP }, - { 0x10, KEY_CHANNELDOWN }, - { 0x03, KEY_ZOOM }, /* fullscreen */ - { 0x1f, KEY_TEXT }, /* closed caption/teletext */ - { 0x20, KEY_SLEEP }, - { 0x29, KEY_CLEAR }, /* boss key */ - { 0x14, KEY_MUTE }, - { 0x2b, KEY_RED }, - { 0x2c, KEY_GREEN }, - { 0x2d, KEY_YELLOW }, - { 0x2e, KEY_BLUE }, - { 0x18, KEY_KPPLUS }, /* fine tune + , not on Y040052 */ - { 0x19, KEY_KPMINUS }, /* fine tune - , not on Y040052 */ - { 0x2a, KEY_MEDIA }, /* PIP (Picture in picture */ - { 0x21, KEY_DOT }, - { 0x13, KEY_ENTER }, - { 0x11, KEY_LAST }, /* Recall (last channel */ - { 0x22, KEY_PREVIOUS }, - { 0x23, KEY_PLAYPAUSE }, - { 0x24, KEY_NEXT }, - { 0x25, KEY_TIME }, /* Time Shifting */ - { 0x26, KEY_STOP }, - { 0x27, KEY_RECORD }, - { 0x28, KEY_SAVE }, /* Screenshot */ - { 0x2f, KEY_MENU }, - { 0x30, KEY_CANCEL }, - { 0x31, KEY_CHANNEL }, /* Channel Surf */ - { 0x32, KEY_SUBTITLE }, - { 0x33, KEY_LANGUAGE }, - { 0x34, KEY_REWIND }, - { 0x35, KEY_FASTFORWARD }, - { 0x36, KEY_TV }, - { 0x37, KEY_RADIO }, /* FM */ - { 0x38, KEY_DVD }, - - { 0x1a, KEY_MODE}, /* change to MCE mode on Y04G0051 */ - { 0x3e, KEY_F21 }, /* MCE +VOL, on Y04G0033 */ - { 0x3a, KEY_F22 }, /* MCE -VOL, on Y04G0033 */ - { 0x3b, KEY_F23 }, /* MCE +CH, on Y04G0033 */ - { 0x3f, KEY_F24 } /* MCE -CH, on Y04G0033 */ -}; - -struct ir_scancode_table ir_codes_winfast_table = { - .scan = ir_codes_winfast, - .size = ARRAY_SIZE(ir_codes_winfast), -}; -EXPORT_SYMBOL_GPL(ir_codes_winfast_table); - -static struct ir_scancode ir_codes_pinnacle_color[] = { - { 0x59, KEY_MUTE }, - { 0x4a, KEY_POWER }, - - { 0x18, KEY_TEXT }, - { 0x26, KEY_TV }, - { 0x3d, KEY_PRINT }, - - { 0x48, KEY_RED }, - { 0x04, KEY_GREEN }, - { 0x11, KEY_YELLOW }, - { 0x00, KEY_BLUE }, - - { 0x2d, KEY_VOLUMEUP }, - { 0x1e, KEY_VOLUMEDOWN }, - - { 0x49, KEY_MENU }, - - { 0x16, KEY_CHANNELUP }, - { 0x17, KEY_CHANNELDOWN }, - - { 0x20, KEY_UP }, - { 0x21, KEY_DOWN }, - { 0x22, KEY_LEFT }, - { 0x23, KEY_RIGHT }, - { 0x0d, KEY_SELECT }, - - { 0x08, KEY_BACK }, - { 0x07, KEY_REFRESH }, - - { 0x2f, KEY_ZOOM }, - { 0x29, KEY_RECORD }, - - { 0x4b, KEY_PAUSE }, - { 0x4d, KEY_REWIND }, - { 0x2e, KEY_PLAY }, - { 0x4e, KEY_FORWARD }, - { 0x53, KEY_PREVIOUS }, - { 0x4c, KEY_STOP }, - { 0x54, KEY_NEXT }, - - { 0x69, KEY_0 }, - { 0x6a, KEY_1 }, - { 0x6b, KEY_2 }, - { 0x6c, KEY_3 }, - { 0x6d, KEY_4 }, - { 0x6e, KEY_5 }, - { 0x6f, KEY_6 }, - { 0x70, KEY_7 }, - { 0x71, KEY_8 }, - { 0x72, KEY_9 }, - - { 0x74, KEY_CHANNEL }, - { 0x0a, KEY_BACKSPACE }, -}; - -struct ir_scancode_table ir_codes_pinnacle_color_table = { - .scan = ir_codes_pinnacle_color, - .size = ARRAY_SIZE(ir_codes_pinnacle_color), -}; -EXPORT_SYMBOL_GPL(ir_codes_pinnacle_color_table); - -/* Hauppauge: the newer, gray remotes (seems there are multiple - * slightly different versions), shipped with cx88+ivtv cards. - * almost rc5 coding, but some non-standard keys */ -static struct ir_scancode ir_codes_hauppauge_new[] = { - /* Keys 0 to 9 */ - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - { 0x0a, KEY_TEXT }, /* keypad asterisk as well */ - { 0x0b, KEY_RED }, /* red button */ - { 0x0c, KEY_RADIO }, - { 0x0d, KEY_MENU }, - { 0x0e, KEY_SUBTITLE }, /* also the # key */ - { 0x0f, KEY_MUTE }, - { 0x10, KEY_VOLUMEUP }, - { 0x11, KEY_VOLUMEDOWN }, - { 0x12, KEY_PREVIOUS }, /* previous channel */ - { 0x14, KEY_UP }, - { 0x15, KEY_DOWN }, - { 0x16, KEY_LEFT }, - { 0x17, KEY_RIGHT }, - { 0x18, KEY_VIDEO }, /* Videos */ - { 0x19, KEY_AUDIO }, /* Music */ - /* 0x1a: Pictures - presume this means - "Multimedia Home Platform" - - no "PICTURES" key in input.h - */ - { 0x1a, KEY_MHP }, - - { 0x1b, KEY_EPG }, /* Guide */ - { 0x1c, KEY_TV }, - { 0x1e, KEY_NEXTSONG }, /* skip >| */ - { 0x1f, KEY_EXIT }, /* back/exit */ - { 0x20, KEY_CHANNELUP }, /* channel / program + */ - { 0x21, KEY_CHANNELDOWN }, /* channel / program - */ - { 0x22, KEY_CHANNEL }, /* source (old black remote) */ - { 0x24, KEY_PREVIOUSSONG }, /* replay |< */ - { 0x25, KEY_ENTER }, /* OK */ - { 0x26, KEY_SLEEP }, /* minimize (old black remote) */ - { 0x29, KEY_BLUE }, /* blue key */ - { 0x2e, KEY_GREEN }, /* green button */ - { 0x30, KEY_PAUSE }, /* pause */ - { 0x32, KEY_REWIND }, /* backward << */ - { 0x34, KEY_FASTFORWARD }, /* forward >> */ - { 0x35, KEY_PLAY }, - { 0x36, KEY_STOP }, - { 0x37, KEY_RECORD }, /* recording */ - { 0x38, KEY_YELLOW }, /* yellow key */ - { 0x3b, KEY_SELECT }, /* top right button */ - { 0x3c, KEY_ZOOM }, /* full */ - { 0x3d, KEY_POWER }, /* system power (green button) */ -}; - -struct ir_scancode_table ir_codes_hauppauge_new_table = { - .scan = ir_codes_hauppauge_new, - .size = ARRAY_SIZE(ir_codes_hauppauge_new), -}; -EXPORT_SYMBOL_GPL(ir_codes_hauppauge_new_table); - -static struct ir_scancode ir_codes_npgtech[] = { - { 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */ - { 0x2a, KEY_FRONT }, - - { 0x3e, KEY_1 }, - { 0x02, KEY_2 }, - { 0x06, KEY_3 }, - { 0x0a, KEY_4 }, - { 0x0e, KEY_5 }, - { 0x12, KEY_6 }, - { 0x16, KEY_7 }, - { 0x1a, KEY_8 }, - { 0x1e, KEY_9 }, - { 0x3a, KEY_0 }, - { 0x22, KEY_NUMLOCK }, /* -/-- */ - { 0x20, KEY_REFRESH }, - - { 0x03, KEY_BRIGHTNESSDOWN }, - { 0x28, KEY_AUDIO }, - { 0x3c, KEY_CHANNELUP }, - { 0x3f, KEY_VOLUMEDOWN }, - { 0x2e, KEY_MUTE }, - { 0x3b, KEY_VOLUMEUP }, - { 0x00, KEY_CHANNELDOWN }, - { 0x07, KEY_BRIGHTNESSUP }, - { 0x2c, KEY_TEXT }, - - { 0x37, KEY_RECORD }, - { 0x17, KEY_PLAY }, - { 0x13, KEY_PAUSE }, - { 0x26, KEY_STOP }, - { 0x18, KEY_FASTFORWARD }, - { 0x14, KEY_REWIND }, - { 0x33, KEY_ZOOM }, - { 0x32, KEY_KEYBOARD }, - { 0x30, KEY_GOTO }, /* Pointing arrow */ - { 0x36, KEY_MACRO }, /* Maximize/Minimize (yellow) */ - { 0x0b, KEY_RADIO }, - { 0x10, KEY_POWER }, - -}; - -struct ir_scancode_table ir_codes_npgtech_table = { - .scan = ir_codes_npgtech, - .size = ARRAY_SIZE(ir_codes_npgtech), -}; -EXPORT_SYMBOL_GPL(ir_codes_npgtech_table); - -/* Norwood Micro (non-Pro) TV Tuner - By Peter Naulls <peter@chocky.org> - Key comments are the functions given in the manual */ -static struct ir_scancode ir_codes_norwood[] = { - /* Keys 0 to 9 */ - { 0x20, KEY_0 }, - { 0x21, KEY_1 }, - { 0x22, KEY_2 }, - { 0x23, KEY_3 }, - { 0x24, KEY_4 }, - { 0x25, KEY_5 }, - { 0x26, KEY_6 }, - { 0x27, KEY_7 }, - { 0x28, KEY_8 }, - { 0x29, KEY_9 }, - - { 0x78, KEY_TUNER }, /* Video Source */ - { 0x2c, KEY_EXIT }, /* Open/Close software */ - { 0x2a, KEY_SELECT }, /* 2 Digit Select */ - { 0x69, KEY_AGAIN }, /* Recall */ - - { 0x32, KEY_BRIGHTNESSUP }, /* Brightness increase */ - { 0x33, KEY_BRIGHTNESSDOWN }, /* Brightness decrease */ - { 0x6b, KEY_KPPLUS }, /* (not named >>>>>) */ - { 0x6c, KEY_KPMINUS }, /* (not named <<<<<) */ - - { 0x2d, KEY_MUTE }, /* Mute */ - { 0x30, KEY_VOLUMEUP }, /* Volume up */ - { 0x31, KEY_VOLUMEDOWN }, /* Volume down */ - { 0x60, KEY_CHANNELUP }, /* Channel up */ - { 0x61, KEY_CHANNELDOWN }, /* Channel down */ - - { 0x3f, KEY_RECORD }, /* Record */ - { 0x37, KEY_PLAY }, /* Play */ - { 0x36, KEY_PAUSE }, /* Pause */ - { 0x2b, KEY_STOP }, /* Stop */ - { 0x67, KEY_FASTFORWARD }, /* Foward */ - { 0x66, KEY_REWIND }, /* Rewind */ - { 0x3e, KEY_SEARCH }, /* Auto Scan */ - { 0x2e, KEY_CAMERA }, /* Capture Video */ - { 0x6d, KEY_MENU }, /* Show/Hide Control */ - { 0x2f, KEY_ZOOM }, /* Full Screen */ - { 0x34, KEY_RADIO }, /* FM */ - { 0x65, KEY_POWER }, /* Computer power */ -}; - -struct ir_scancode_table ir_codes_norwood_table = { - .scan = ir_codes_norwood, - .size = ARRAY_SIZE(ir_codes_norwood), -}; -EXPORT_SYMBOL_GPL(ir_codes_norwood_table); - -/* From reading the following remotes: - * Zenith Universal 7 / TV Mode 807 / VCR Mode 837 - * Hauppauge (from NOVA-CI-s box product) - * This is a "middle of the road" approach, differences are noted - */ -static struct ir_scancode ir_codes_budget_ci_old[] = { - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x0a, KEY_ENTER }, - { 0x0b, KEY_RED }, - { 0x0c, KEY_POWER }, /* RADIO on Hauppauge */ - { 0x0d, KEY_MUTE }, - { 0x0f, KEY_A }, /* TV on Hauppauge */ - { 0x10, KEY_VOLUMEUP }, - { 0x11, KEY_VOLUMEDOWN }, - { 0x14, KEY_B }, - { 0x1c, KEY_UP }, - { 0x1d, KEY_DOWN }, - { 0x1e, KEY_OPTION }, /* RESERVED on Hauppauge */ - { 0x1f, KEY_BREAK }, - { 0x20, KEY_CHANNELUP }, - { 0x21, KEY_CHANNELDOWN }, - { 0x22, KEY_PREVIOUS }, /* Prev Ch on Zenith, SOURCE on Hauppauge */ - { 0x24, KEY_RESTART }, - { 0x25, KEY_OK }, - { 0x26, KEY_CYCLEWINDOWS }, /* MINIMIZE on Hauppauge */ - { 0x28, KEY_ENTER }, /* VCR mode on Zenith */ - { 0x29, KEY_PAUSE }, - { 0x2b, KEY_RIGHT }, - { 0x2c, KEY_LEFT }, - { 0x2e, KEY_MENU }, /* FULL SCREEN on Hauppauge */ - { 0x30, KEY_SLOW }, - { 0x31, KEY_PREVIOUS }, /* VCR mode on Zenith */ - { 0x32, KEY_REWIND }, - { 0x34, KEY_FASTFORWARD }, - { 0x35, KEY_PLAY }, - { 0x36, KEY_STOP }, - { 0x37, KEY_RECORD }, - { 0x38, KEY_TUNER }, /* TV/VCR on Zenith */ - { 0x3a, KEY_C }, - { 0x3c, KEY_EXIT }, - { 0x3d, KEY_POWER2 }, - { 0x3e, KEY_TUNER }, -}; - -struct ir_scancode_table ir_codes_budget_ci_old_table = { - .scan = ir_codes_budget_ci_old, - .size = ARRAY_SIZE(ir_codes_budget_ci_old), -}; -EXPORT_SYMBOL_GPL(ir_codes_budget_ci_old_table); - -/* - * Marc Fargas <telenieko@telenieko.com> - * this is the remote control that comes with the asus p7131 - * which has a label saying is "Model PC-39" - */ -static struct ir_scancode ir_codes_asus_pc39[] = { - /* Keys 0 to 9 */ - { 0x15, KEY_0 }, - { 0x29, KEY_1 }, - { 0x2d, KEY_2 }, - { 0x2b, KEY_3 }, - { 0x09, KEY_4 }, - { 0x0d, KEY_5 }, - { 0x0b, KEY_6 }, - { 0x31, KEY_7 }, - { 0x35, KEY_8 }, - { 0x33, KEY_9 }, - - { 0x3e, KEY_RADIO }, /* radio */ - { 0x03, KEY_MENU }, /* dvd/menu */ - { 0x2a, KEY_VOLUMEUP }, - { 0x19, KEY_VOLUMEDOWN }, - { 0x37, KEY_UP }, - { 0x3b, KEY_DOWN }, - { 0x27, KEY_LEFT }, - { 0x2f, KEY_RIGHT }, - { 0x25, KEY_VIDEO }, /* video */ - { 0x39, KEY_AUDIO }, /* music */ - - { 0x21, KEY_TV }, /* tv */ - { 0x1d, KEY_EXIT }, /* back */ - { 0x0a, KEY_CHANNELUP }, /* channel / program + */ - { 0x1b, KEY_CHANNELDOWN }, /* channel / program - */ - { 0x1a, KEY_ENTER }, /* enter */ - - { 0x06, KEY_PAUSE }, /* play/pause */ - { 0x1e, KEY_PREVIOUS }, /* rew */ - { 0x26, KEY_NEXT }, /* forward */ - { 0x0e, KEY_REWIND }, /* backward << */ - { 0x3a, KEY_FASTFORWARD }, /* forward >> */ - { 0x36, KEY_STOP }, - { 0x2e, KEY_RECORD }, /* recording */ - { 0x16, KEY_POWER }, /* the button that reads "close" */ - - { 0x11, KEY_ZOOM }, /* full screen */ - { 0x13, KEY_MACRO }, /* recall */ - { 0x23, KEY_HOME }, /* home */ - { 0x05, KEY_PVR }, /* picture */ - { 0x3d, KEY_MUTE }, /* mute */ - { 0x01, KEY_DVD }, /* dvd */ -}; - -struct ir_scancode_table ir_codes_asus_pc39_table = { - .scan = ir_codes_asus_pc39, - .size = ARRAY_SIZE(ir_codes_asus_pc39), -}; -EXPORT_SYMBOL_GPL(ir_codes_asus_pc39_table); - - -/* Encore ENLTV-FM - black plastic, white front cover with white glowing buttons - Juan Pablo Sormani <sorman@gmail.com> */ -static struct ir_scancode ir_codes_encore_enltv[] = { - - /* Power button does nothing, neither in Windows app, - although it sends data (used for BIOS wakeup?) */ - { 0x0d, KEY_MUTE }, - - { 0x1e, KEY_TV }, - { 0x00, KEY_VIDEO }, - { 0x01, KEY_AUDIO }, /* music */ - { 0x02, KEY_MHP }, /* picture */ - - { 0x1f, KEY_1 }, - { 0x03, KEY_2 }, - { 0x04, KEY_3 }, - { 0x05, KEY_4 }, - { 0x1c, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x1d, KEY_9 }, - { 0x0a, KEY_0 }, - - { 0x09, KEY_LIST }, /* -/-- */ - { 0x0b, KEY_LAST }, /* recall */ - - { 0x14, KEY_HOME }, /* win start menu */ - { 0x15, KEY_EXIT }, /* exit */ - { 0x16, KEY_CHANNELUP }, /* UP */ - { 0x12, KEY_CHANNELDOWN }, /* DOWN */ - { 0x0c, KEY_VOLUMEUP }, /* RIGHT */ - { 0x17, KEY_VOLUMEDOWN }, /* LEFT */ - - { 0x18, KEY_ENTER }, /* OK */ - - { 0x0e, KEY_ESC }, - { 0x13, KEY_CYCLEWINDOWS }, /* desktop */ - { 0x11, KEY_TAB }, - { 0x19, KEY_SWITCHVIDEOMODE }, /* switch */ - - { 0x1a, KEY_MENU }, - { 0x1b, KEY_ZOOM }, /* fullscreen */ - { 0x44, KEY_TIME }, /* time shift */ - { 0x40, KEY_MODE }, /* source */ - - { 0x5a, KEY_RECORD }, - { 0x42, KEY_PLAY }, /* play/pause */ - { 0x45, KEY_STOP }, - { 0x43, KEY_CAMERA }, /* camera icon */ - - { 0x48, KEY_REWIND }, - { 0x4a, KEY_FASTFORWARD }, - { 0x49, KEY_PREVIOUS }, - { 0x4b, KEY_NEXT }, - - { 0x4c, KEY_FAVORITES }, /* tv wall */ - { 0x4d, KEY_SOUND }, /* DVD sound */ - { 0x4e, KEY_LANGUAGE }, /* DVD lang */ - { 0x4f, KEY_TEXT }, /* DVD text */ - - { 0x50, KEY_SLEEP }, /* shutdown */ - { 0x51, KEY_MODE }, /* stereo > main */ - { 0x52, KEY_SELECT }, /* stereo > sap */ - { 0x53, KEY_PROG1 }, /* teletext */ - - - { 0x59, KEY_RED }, /* AP1 */ - { 0x41, KEY_GREEN }, /* AP2 */ - { 0x47, KEY_YELLOW }, /* AP3 */ - { 0x57, KEY_BLUE }, /* AP4 */ -}; - -struct ir_scancode_table ir_codes_encore_enltv_table = { - .scan = ir_codes_encore_enltv, - .size = ARRAY_SIZE(ir_codes_encore_enltv), -}; -EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_table); - -/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton - Mauro Carvalho Chehab <mchehab@infradead.org> */ -static struct ir_scancode ir_codes_encore_enltv2[] = { - { 0x4c, KEY_POWER2 }, - { 0x4a, KEY_TUNER }, - { 0x40, KEY_1 }, - { 0x60, KEY_2 }, - { 0x50, KEY_3 }, - { 0x70, KEY_4 }, - { 0x48, KEY_5 }, - { 0x68, KEY_6 }, - { 0x58, KEY_7 }, - { 0x78, KEY_8 }, - { 0x44, KEY_9 }, - { 0x54, KEY_0 }, - - { 0x64, KEY_LAST }, /* +100 */ - { 0x4e, KEY_AGAIN }, /* Recall */ - - { 0x6c, KEY_SWITCHVIDEOMODE }, /* Video Source */ - { 0x5e, KEY_MENU }, - { 0x56, KEY_SCREEN }, - { 0x7a, KEY_SETUP }, - - { 0x46, KEY_MUTE }, - { 0x5c, KEY_MODE }, /* Stereo */ - { 0x74, KEY_INFO }, - { 0x7c, KEY_CLEAR }, - - { 0x55, KEY_UP }, - { 0x49, KEY_DOWN }, - { 0x7e, KEY_LEFT }, - { 0x59, KEY_RIGHT }, - { 0x6a, KEY_ENTER }, - - { 0x42, KEY_VOLUMEUP }, - { 0x62, KEY_VOLUMEDOWN }, - { 0x52, KEY_CHANNELUP }, - { 0x72, KEY_CHANNELDOWN }, - - { 0x41, KEY_RECORD }, - { 0x51, KEY_CAMERA }, /* Snapshot */ - { 0x75, KEY_TIME }, /* Timeshift */ - { 0x71, KEY_TV2 }, /* PIP */ - - { 0x45, KEY_REWIND }, - { 0x6f, KEY_PAUSE }, - { 0x7d, KEY_FORWARD }, - { 0x79, KEY_STOP }, -}; - -struct ir_scancode_table ir_codes_encore_enltv2_table = { - .scan = ir_codes_encore_enltv2, - .size = ARRAY_SIZE(ir_codes_encore_enltv2), -}; -EXPORT_SYMBOL_GPL(ir_codes_encore_enltv2_table); - -/* for the Technotrend 1500 bundled remotes (grey and black): */ -static struct ir_scancode ir_codes_tt_1500[] = { - { 0x01, KEY_POWER }, - { 0x02, KEY_SHUFFLE }, /* ? double-arrow key */ - { 0x03, KEY_1 }, - { 0x04, KEY_2 }, - { 0x05, KEY_3 }, - { 0x06, KEY_4 }, - { 0x07, KEY_5 }, - { 0x08, KEY_6 }, - { 0x09, KEY_7 }, - { 0x0a, KEY_8 }, - { 0x0b, KEY_9 }, - { 0x0c, KEY_0 }, - { 0x0d, KEY_UP }, - { 0x0e, KEY_LEFT }, - { 0x0f, KEY_OK }, - { 0x10, KEY_RIGHT }, - { 0x11, KEY_DOWN }, - { 0x12, KEY_INFO }, - { 0x13, KEY_EXIT }, - { 0x14, KEY_RED }, - { 0x15, KEY_GREEN }, - { 0x16, KEY_YELLOW }, - { 0x17, KEY_BLUE }, - { 0x18, KEY_MUTE }, - { 0x19, KEY_TEXT }, - { 0x1a, KEY_MODE }, /* ? TV/Radio */ - { 0x21, KEY_OPTION }, - { 0x22, KEY_EPG }, - { 0x23, KEY_CHANNELUP }, - { 0x24, KEY_CHANNELDOWN }, - { 0x25, KEY_VOLUMEUP }, - { 0x26, KEY_VOLUMEDOWN }, - { 0x27, KEY_SETUP }, - { 0x3a, KEY_RECORD }, /* these keys are only in the black remote */ - { 0x3b, KEY_PLAY }, - { 0x3c, KEY_STOP }, - { 0x3d, KEY_REWIND }, - { 0x3e, KEY_PAUSE }, - { 0x3f, KEY_FORWARD }, -}; - -struct ir_scancode_table ir_codes_tt_1500_table = { - .scan = ir_codes_tt_1500, - .size = ARRAY_SIZE(ir_codes_tt_1500), -}; -EXPORT_SYMBOL_GPL(ir_codes_tt_1500_table); - -/* DViCO FUSION HDTV MCE remote */ -static struct ir_scancode ir_codes_fusionhdtv_mce[] = { - - { 0x0b, KEY_1 }, - { 0x17, KEY_2 }, - { 0x1b, KEY_3 }, - { 0x07, KEY_4 }, - { 0x50, KEY_5 }, - { 0x54, KEY_6 }, - { 0x48, KEY_7 }, - { 0x4c, KEY_8 }, - { 0x58, KEY_9 }, - { 0x03, KEY_0 }, - - { 0x5e, KEY_OK }, - { 0x51, KEY_UP }, - { 0x53, KEY_DOWN }, - { 0x5b, KEY_LEFT }, - { 0x5f, KEY_RIGHT }, - - { 0x02, KEY_TV }, /* Labeled DTV on remote */ - { 0x0e, KEY_MP3 }, - { 0x1a, KEY_DVD }, - { 0x1e, KEY_FAVORITES }, /* Labeled CPF on remote */ - { 0x16, KEY_SETUP }, - { 0x46, KEY_POWER2 }, /* TV On/Off button on remote */ - { 0x0a, KEY_EPG }, /* Labeled Guide on remote */ - - { 0x49, KEY_BACK }, - { 0x59, KEY_INFO }, /* Labeled MORE on remote */ - { 0x4d, KEY_MENU }, /* Labeled DVDMENU on remote */ - { 0x55, KEY_CYCLEWINDOWS }, /* Labeled ALT-TAB on remote */ - - { 0x0f, KEY_PREVIOUSSONG }, /* Labeled |<< REPLAY on remote */ - { 0x12, KEY_NEXTSONG }, /* Labeled >>| SKIP on remote */ - { 0x42, KEY_ENTER }, /* Labeled START with a green - MS windows logo on remote */ - - { 0x15, KEY_VOLUMEUP }, - { 0x05, KEY_VOLUMEDOWN }, - { 0x11, KEY_CHANNELUP }, - { 0x09, KEY_CHANNELDOWN }, - - { 0x52, KEY_CAMERA }, - { 0x5a, KEY_TUNER }, - { 0x19, KEY_OPEN }, - - { 0x13, KEY_MODE }, /* 4:3 16:9 select */ - { 0x1f, KEY_ZOOM }, - - { 0x43, KEY_REWIND }, - { 0x47, KEY_PLAYPAUSE }, - { 0x4f, KEY_FASTFORWARD }, - { 0x57, KEY_MUTE }, - { 0x0d, KEY_STOP }, - { 0x01, KEY_RECORD }, - { 0x4e, KEY_POWER }, -}; - -struct ir_scancode_table ir_codes_fusionhdtv_mce_table = { - .scan = ir_codes_fusionhdtv_mce, - .size = ARRAY_SIZE(ir_codes_fusionhdtv_mce), -}; -EXPORT_SYMBOL_GPL(ir_codes_fusionhdtv_mce_table); - -/* Pinnacle PCTV HD 800i mini remote */ -static struct ir_scancode ir_codes_pinnacle_pctv_hd[] = { - - { 0x0f, KEY_1 }, - { 0x15, KEY_2 }, - { 0x10, KEY_3 }, - { 0x18, KEY_4 }, - { 0x1b, KEY_5 }, - { 0x1e, KEY_6 }, - { 0x11, KEY_7 }, - { 0x21, KEY_8 }, - { 0x12, KEY_9 }, - { 0x27, KEY_0 }, - - { 0x24, KEY_ZOOM }, - { 0x2a, KEY_SUBTITLE }, - - { 0x00, KEY_MUTE }, - { 0x01, KEY_ENTER }, /* Pinnacle Logo */ - { 0x39, KEY_POWER }, - - { 0x03, KEY_VOLUMEUP }, - { 0x09, KEY_VOLUMEDOWN }, - { 0x06, KEY_CHANNELUP }, - { 0x0c, KEY_CHANNELDOWN }, - - { 0x2d, KEY_REWIND }, - { 0x30, KEY_PLAYPAUSE }, - { 0x33, KEY_FASTFORWARD }, - { 0x3c, KEY_STOP }, - { 0x36, KEY_RECORD }, - { 0x3f, KEY_EPG }, /* Labeled "?" */ -}; - -struct ir_scancode_table ir_codes_pinnacle_pctv_hd_table = { - .scan = ir_codes_pinnacle_pctv_hd, - .size = ARRAY_SIZE(ir_codes_pinnacle_pctv_hd), -}; -EXPORT_SYMBOL_GPL(ir_codes_pinnacle_pctv_hd_table); - -/* - * Igor Kuznetsov <igk72@ya.ru> - * Andrey J. Melnikov <temnota@kmv.ru> - * - * Keytable is used by BeholdTV 60x series, M6 series at - * least, and probably other cards too. - * The "ascii-art picture" below (in comments, first row - * is the keycode in hex, and subsequent row(s) shows - * the button labels (several variants when appropriate) - * helps to descide which keycodes to assign to the buttons. - */ -static struct ir_scancode ir_codes_behold[] = { - - /* 0x1c 0x12 * - * TV/FM POWER * - * */ - { 0x1c, KEY_TUNER }, /* XXX KEY_TV / KEY_RADIO */ - { 0x12, KEY_POWER }, - - /* 0x01 0x02 0x03 * - * 1 2 3 * - * * - * 0x04 0x05 0x06 * - * 4 5 6 * - * * - * 0x07 0x08 0x09 * - * 7 8 9 * - * */ - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - - /* 0x0a 0x00 0x17 * - * RECALL 0 MODE * - * */ - { 0x0a, KEY_AGAIN }, - { 0x00, KEY_0 }, - { 0x17, KEY_MODE }, - - /* 0x14 0x10 * - * ASPECT FULLSCREEN * - * */ - { 0x14, KEY_SCREEN }, - { 0x10, KEY_ZOOM }, - - /* 0x0b * - * Up * - * * - * 0x18 0x16 0x0c * - * Left Ok Right * - * * - * 0x015 * - * Down * - * */ - { 0x0b, KEY_CHANNELUP }, - { 0x18, KEY_VOLUMEDOWN }, - { 0x16, KEY_OK }, /* XXX KEY_ENTER */ - { 0x0c, KEY_VOLUMEUP }, - { 0x15, KEY_CHANNELDOWN }, - - /* 0x11 0x0d * - * MUTE INFO * - * */ - { 0x11, KEY_MUTE }, - { 0x0d, KEY_INFO }, - - /* 0x0f 0x1b 0x1a * - * RECORD PLAY/PAUSE STOP * - * * - * 0x0e 0x1f 0x1e * - *TELETEXT AUDIO SOURCE * - * RED YELLOW * - * */ - { 0x0f, KEY_RECORD }, - { 0x1b, KEY_PLAYPAUSE }, - { 0x1a, KEY_STOP }, - { 0x0e, KEY_TEXT }, - { 0x1f, KEY_RED }, /*XXX KEY_AUDIO */ - { 0x1e, KEY_YELLOW }, /*XXX KEY_SOURCE */ - - /* 0x1d 0x13 0x19 * - * SLEEP PREVIEW DVB * - * GREEN BLUE * - * */ - { 0x1d, KEY_SLEEP }, - { 0x13, KEY_GREEN }, - { 0x19, KEY_BLUE }, /* XXX KEY_SAT */ - - /* 0x58 0x5c * - * FREEZE SNAPSHOT * - * */ - { 0x58, KEY_SLOW }, - { 0x5c, KEY_CAMERA }, - -}; - -struct ir_scancode_table ir_codes_behold_table = { - .scan = ir_codes_behold, - .size = ARRAY_SIZE(ir_codes_behold), -}; -EXPORT_SYMBOL_GPL(ir_codes_behold_table); - -/* Beholder Intl. Ltd. 2008 - * Dmitry Belimov d.belimov@google.com - * Keytable is used by BeholdTV Columbus - * The "ascii-art picture" below (in comments, first row - * is the keycode in hex, and subsequent row(s) shows - * the button labels (several variants when appropriate) - * helps to descide which keycodes to assign to the buttons. - */ -static struct ir_scancode ir_codes_behold_columbus[] = { - - /* 0x13 0x11 0x1C 0x12 * - * Mute Source TV/FM Power * - * */ - - { 0x13, KEY_MUTE }, - { 0x11, KEY_PROPS }, - { 0x1C, KEY_TUNER }, /* KEY_TV/KEY_RADIO */ - { 0x12, KEY_POWER }, - - /* 0x01 0x02 0x03 0x0D * - * 1 2 3 Stereo * - * * - * 0x04 0x05 0x06 0x19 * - * 4 5 6 Snapshot * - * * - * 0x07 0x08 0x09 0x10 * - * 7 8 9 Zoom * - * */ - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x0D, KEY_SETUP }, /* Setup key */ - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x19, KEY_CAMERA }, /* Snapshot key */ - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x10, KEY_ZOOM }, - - /* 0x0A 0x00 0x0B 0x0C * - * RECALL 0 ChannelUp VolumeUp * - * */ - { 0x0A, KEY_AGAIN }, - { 0x00, KEY_0 }, - { 0x0B, KEY_CHANNELUP }, - { 0x0C, KEY_VOLUMEUP }, - - /* 0x1B 0x1D 0x15 0x18 * - * Timeshift Record ChannelDown VolumeDown * - * */ - - { 0x1B, KEY_TIME }, - { 0x1D, KEY_RECORD }, - { 0x15, KEY_CHANNELDOWN }, - { 0x18, KEY_VOLUMEDOWN }, - - /* 0x0E 0x1E 0x0F 0x1A * - * Stop Pause Previouse Next * - * */ - - { 0x0E, KEY_STOP }, - { 0x1E, KEY_PAUSE }, - { 0x0F, KEY_PREVIOUS }, - { 0x1A, KEY_NEXT }, - -}; - -struct ir_scancode_table ir_codes_behold_columbus_table = { - .scan = ir_codes_behold_columbus, - .size = ARRAY_SIZE(ir_codes_behold_columbus), -}; -EXPORT_SYMBOL_GPL(ir_codes_behold_columbus_table); - -/* - * Remote control for the Genius TVGO A11MCE - * Adrian Pardini <pardo.bsso@gmail.com> - */ -static struct ir_scancode ir_codes_genius_tvgo_a11mce[] = { - /* Keys 0 to 9 */ - { 0x48, KEY_0 }, - { 0x09, KEY_1 }, - { 0x1d, KEY_2 }, - { 0x1f, KEY_3 }, - { 0x19, KEY_4 }, - { 0x1b, KEY_5 }, - { 0x11, KEY_6 }, - { 0x17, KEY_7 }, - { 0x12, KEY_8 }, - { 0x16, KEY_9 }, - - { 0x54, KEY_RECORD }, /* recording */ - { 0x06, KEY_MUTE }, /* mute */ - { 0x10, KEY_POWER }, - { 0x40, KEY_LAST }, /* recall */ - { 0x4c, KEY_CHANNELUP }, /* channel / program + */ - { 0x00, KEY_CHANNELDOWN }, /* channel / program - */ - { 0x0d, KEY_VOLUMEUP }, - { 0x15, KEY_VOLUMEDOWN }, - { 0x4d, KEY_OK }, /* also labeled as Pause */ - { 0x1c, KEY_ZOOM }, /* full screen and Stop*/ - { 0x02, KEY_MODE }, /* AV Source or Rewind*/ - { 0x04, KEY_LIST }, /* -/-- */ - /* small arrows above numbers */ - { 0x1a, KEY_NEXT }, /* also Fast Forward */ - { 0x0e, KEY_PREVIOUS }, /* also Rewind */ - /* these are in a rather non standard layout and have - an alternate name written */ - { 0x1e, KEY_UP }, /* Video Setting */ - { 0x0a, KEY_DOWN }, /* Video Default */ - { 0x05, KEY_CAMERA }, /* Snapshot */ - { 0x0c, KEY_RIGHT }, /* Hide Panel */ - /* Four buttons without label */ - { 0x49, KEY_RED }, - { 0x0b, KEY_GREEN }, - { 0x13, KEY_YELLOW }, - { 0x50, KEY_BLUE }, -}; - -struct ir_scancode_table ir_codes_genius_tvgo_a11mce_table = { - .scan = ir_codes_genius_tvgo_a11mce, - .size = ARRAY_SIZE(ir_codes_genius_tvgo_a11mce), -}; -EXPORT_SYMBOL_GPL(ir_codes_genius_tvgo_a11mce_table); - -/* - * Remote control for Powercolor Real Angel 330 - * Daniel Fraga <fragabr@gmail.com> - */ -static struct ir_scancode ir_codes_powercolor_real_angel[] = { - { 0x38, KEY_SWITCHVIDEOMODE }, /* switch inputs */ - { 0x0c, KEY_MEDIA }, /* Turn ON/OFF App */ - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x0a, KEY_DIGITS }, /* single, double, tripple digit */ - { 0x29, KEY_PREVIOUS }, /* previous channel */ - { 0x12, KEY_BRIGHTNESSUP }, - { 0x13, KEY_BRIGHTNESSDOWN }, - { 0x2b, KEY_MODE }, /* stereo/mono */ - { 0x2c, KEY_TEXT }, /* teletext */ - { 0x20, KEY_CHANNELUP }, /* channel up */ - { 0x21, KEY_CHANNELDOWN }, /* channel down */ - { 0x10, KEY_VOLUMEUP }, /* volume up */ - { 0x11, KEY_VOLUMEDOWN }, /* volume down */ - { 0x0d, KEY_MUTE }, - { 0x1f, KEY_RECORD }, - { 0x17, KEY_PLAY }, - { 0x16, KEY_PAUSE }, - { 0x0b, KEY_STOP }, - { 0x27, KEY_FASTFORWARD }, - { 0x26, KEY_REWIND }, - { 0x1e, KEY_SEARCH }, /* autoscan */ - { 0x0e, KEY_CAMERA }, /* snapshot */ - { 0x2d, KEY_SETUP }, - { 0x0f, KEY_SCREEN }, /* full screen */ - { 0x14, KEY_RADIO }, /* FM radio */ - { 0x25, KEY_POWER }, /* power */ -}; - -struct ir_scancode_table ir_codes_powercolor_real_angel_table = { - .scan = ir_codes_powercolor_real_angel, - .size = ARRAY_SIZE(ir_codes_powercolor_real_angel), -}; -EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel_table); - -/* Kworld Plus TV Analog Lite PCI IR - Mauro Carvalho Chehab <mchehab@infradead.org> - */ -static struct ir_scancode ir_codes_kworld_plus_tv_analog[] = { - { 0x0c, KEY_PROG1 }, /* Kworld key */ - { 0x16, KEY_CLOSECD }, /* -> ) */ - { 0x1d, KEY_POWER2 }, - - { 0x00, KEY_1 }, - { 0x01, KEY_2 }, - { 0x02, KEY_3 }, /* Two keys have the same code: 3 and left */ - { 0x03, KEY_4 }, /* Two keys have the same code: 3 and right */ - { 0x04, KEY_5 }, - { 0x05, KEY_6 }, - { 0x06, KEY_7 }, - { 0x07, KEY_8 }, - { 0x08, KEY_9 }, - { 0x0a, KEY_0 }, - - { 0x09, KEY_AGAIN }, - { 0x14, KEY_MUTE }, - - { 0x20, KEY_UP }, - { 0x21, KEY_DOWN }, - { 0x0b, KEY_ENTER }, - - { 0x10, KEY_CHANNELUP }, - { 0x11, KEY_CHANNELDOWN }, - - /* Couldn't map key left/key right since those - conflict with '3' and '4' scancodes - I dunno what the original driver does - */ - - { 0x13, KEY_VOLUMEUP }, - { 0x12, KEY_VOLUMEDOWN }, - - /* The lower part of the IR - There are several duplicated keycodes there. - Most of them conflict with digits. - Add mappings just to the unused scancodes. - Somehow, the original driver has a way to know, - but this doesn't seem to be on some GPIO. - Also, it is not related to the time between keyup - and keydown. - */ - { 0x19, KEY_TIME}, /* Timeshift */ - { 0x1a, KEY_STOP}, - { 0x1b, KEY_RECORD}, - - { 0x22, KEY_TEXT}, - - { 0x15, KEY_AUDIO}, /* ((*)) */ - { 0x0f, KEY_ZOOM}, - { 0x1c, KEY_CAMERA}, /* snapshot */ - - { 0x18, KEY_RED}, /* B */ - { 0x23, KEY_GREEN}, /* C */ -}; -struct ir_scancode_table ir_codes_kworld_plus_tv_analog_table = { - .scan = ir_codes_kworld_plus_tv_analog, - .size = ARRAY_SIZE(ir_codes_kworld_plus_tv_analog), -}; -EXPORT_SYMBOL_GPL(ir_codes_kworld_plus_tv_analog_table); - -/* Kaiomy TVnPC U2 - Mauro Carvalho Chehab <mchehab@infradead.org> - */ -static struct ir_scancode ir_codes_kaiomy[] = { - { 0x43, KEY_POWER2}, - { 0x01, KEY_LIST}, - { 0x0b, KEY_ZOOM}, - { 0x03, KEY_POWER}, - - { 0x04, KEY_1}, - { 0x08, KEY_2}, - { 0x02, KEY_3}, - - { 0x0f, KEY_4}, - { 0x05, KEY_5}, - { 0x06, KEY_6}, - - { 0x0c, KEY_7}, - { 0x0d, KEY_8}, - { 0x0a, KEY_9}, - - { 0x11, KEY_0}, - - { 0x09, KEY_CHANNELUP}, - { 0x07, KEY_CHANNELDOWN}, - - { 0x0e, KEY_VOLUMEUP}, - { 0x13, KEY_VOLUMEDOWN}, - - { 0x10, KEY_HOME}, - { 0x12, KEY_ENTER}, - - { 0x14, KEY_RECORD}, - { 0x15, KEY_STOP}, - { 0x16, KEY_PLAY}, - { 0x17, KEY_MUTE}, - - { 0x18, KEY_UP}, - { 0x19, KEY_DOWN}, - { 0x1a, KEY_LEFT}, - { 0x1b, KEY_RIGHT}, - - { 0x1c, KEY_RED}, - { 0x1d, KEY_GREEN}, - { 0x1e, KEY_YELLOW}, - { 0x1f, KEY_BLUE}, -}; -struct ir_scancode_table ir_codes_kaiomy_table = { - .scan = ir_codes_kaiomy, - .size = ARRAY_SIZE(ir_codes_kaiomy), -}; -EXPORT_SYMBOL_GPL(ir_codes_kaiomy_table); - -static struct ir_scancode ir_codes_avermedia_a16d[] = { - { 0x20, KEY_LIST}, - { 0x00, KEY_POWER}, - { 0x28, KEY_1}, - { 0x18, KEY_2}, - { 0x38, KEY_3}, - { 0x24, KEY_4}, - { 0x14, KEY_5}, - { 0x34, KEY_6}, - { 0x2c, KEY_7}, - { 0x1c, KEY_8}, - { 0x3c, KEY_9}, - { 0x12, KEY_SUBTITLE}, - { 0x22, KEY_0}, - { 0x32, KEY_REWIND}, - { 0x3a, KEY_SHUFFLE}, - { 0x02, KEY_PRINT}, - { 0x11, KEY_CHANNELDOWN}, - { 0x31, KEY_CHANNELUP}, - { 0x0c, KEY_ZOOM}, - { 0x1e, KEY_VOLUMEDOWN}, - { 0x3e, KEY_VOLUMEUP}, - { 0x0a, KEY_MUTE}, - { 0x04, KEY_AUDIO}, - { 0x26, KEY_RECORD}, - { 0x06, KEY_PLAY}, - { 0x36, KEY_STOP}, - { 0x16, KEY_PAUSE}, - { 0x2e, KEY_REWIND}, - { 0x0e, KEY_FASTFORWARD}, - { 0x30, KEY_TEXT}, - { 0x21, KEY_GREEN}, - { 0x01, KEY_BLUE}, - { 0x08, KEY_EPG}, - { 0x2a, KEY_MENU}, -}; -struct ir_scancode_table ir_codes_avermedia_a16d_table = { - .scan = ir_codes_avermedia_a16d, - .size = ARRAY_SIZE(ir_codes_avermedia_a16d), -}; -EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d_table); - -/* Encore ENLTV-FM v5.3 - Mauro Carvalho Chehab <mchehab@infradead.org> - */ -static struct ir_scancode ir_codes_encore_enltv_fm53[] = { - { 0x10, KEY_POWER2}, - { 0x06, KEY_MUTE}, - - { 0x09, KEY_1}, - { 0x1d, KEY_2}, - { 0x1f, KEY_3}, - { 0x19, KEY_4}, - { 0x1b, KEY_5}, - { 0x11, KEY_6}, - { 0x17, KEY_7}, - { 0x12, KEY_8}, - { 0x16, KEY_9}, - { 0x48, KEY_0}, - - { 0x04, KEY_LIST}, /* -/-- */ - { 0x40, KEY_LAST}, /* recall */ - - { 0x02, KEY_MODE}, /* TV/AV */ - { 0x05, KEY_CAMERA}, /* SNAPSHOT */ - - { 0x4c, KEY_CHANNELUP}, /* UP */ - { 0x00, KEY_CHANNELDOWN}, /* DOWN */ - { 0x0d, KEY_VOLUMEUP}, /* RIGHT */ - { 0x15, KEY_VOLUMEDOWN}, /* LEFT */ - { 0x49, KEY_ENTER}, /* OK */ - - { 0x54, KEY_RECORD}, - { 0x4d, KEY_PLAY}, /* pause */ - - { 0x1e, KEY_MENU}, /* video setting */ - { 0x0e, KEY_RIGHT}, /* <- */ - { 0x1a, KEY_LEFT}, /* -> */ - - { 0x0a, KEY_CLEAR}, /* video default */ - { 0x0c, KEY_ZOOM}, /* hide pannel */ - { 0x47, KEY_SLEEP}, /* shutdown */ -}; -struct ir_scancode_table ir_codes_encore_enltv_fm53_table = { - .scan = ir_codes_encore_enltv_fm53, - .size = ARRAY_SIZE(ir_codes_encore_enltv_fm53), -}; -EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53_table); - -/* Zogis Real Audio 220 - 32 keys IR */ -static struct ir_scancode ir_codes_real_audio_220_32_keys[] = { - { 0x1c, KEY_RADIO}, - { 0x12, KEY_POWER2}, - - { 0x01, KEY_1}, - { 0x02, KEY_2}, - { 0x03, KEY_3}, - { 0x04, KEY_4}, - { 0x05, KEY_5}, - { 0x06, KEY_6}, - { 0x07, KEY_7}, - { 0x08, KEY_8}, - { 0x09, KEY_9}, - { 0x00, KEY_0}, - - { 0x0c, KEY_VOLUMEUP}, - { 0x18, KEY_VOLUMEDOWN}, - { 0x0b, KEY_CHANNELUP}, - { 0x15, KEY_CHANNELDOWN}, - { 0x16, KEY_ENTER}, - - { 0x11, KEY_LIST}, /* Source */ - { 0x0d, KEY_AUDIO}, /* stereo */ - - { 0x0f, KEY_PREVIOUS}, /* Prev */ - { 0x1b, KEY_TIME}, /* Timeshift */ - { 0x1a, KEY_NEXT}, /* Next */ - - { 0x0e, KEY_STOP}, - { 0x1f, KEY_PLAY}, - { 0x1e, KEY_PLAYPAUSE}, /* Pause */ - - { 0x1d, KEY_RECORD}, - { 0x13, KEY_MUTE}, - { 0x19, KEY_CAMERA}, /* Snapshot */ - -}; -struct ir_scancode_table ir_codes_real_audio_220_32_keys_table = { - .scan = ir_codes_real_audio_220_32_keys, - .size = ARRAY_SIZE(ir_codes_real_audio_220_32_keys), -}; -EXPORT_SYMBOL_GPL(ir_codes_real_audio_220_32_keys_table); - -/* ATI TV Wonder HD 600 USB - Devin Heitmueller <devin.heitmueller@gmail.com> - */ -static struct ir_scancode ir_codes_ati_tv_wonder_hd_600[] = { - { 0x00, KEY_RECORD}, /* Row 1 */ - { 0x01, KEY_PLAYPAUSE}, - { 0x02, KEY_STOP}, - { 0x03, KEY_POWER}, - { 0x04, KEY_PREVIOUS}, /* Row 2 */ - { 0x05, KEY_REWIND}, - { 0x06, KEY_FORWARD}, - { 0x07, KEY_NEXT}, - { 0x08, KEY_EPG}, /* Row 3 */ - { 0x09, KEY_HOME}, - { 0x0a, KEY_MENU}, - { 0x0b, KEY_CHANNELUP}, - { 0x0c, KEY_BACK}, /* Row 4 */ - { 0x0d, KEY_UP}, - { 0x0e, KEY_INFO}, - { 0x0f, KEY_CHANNELDOWN}, - { 0x10, KEY_LEFT}, /* Row 5 */ - { 0x11, KEY_SELECT}, - { 0x12, KEY_RIGHT}, - { 0x13, KEY_VOLUMEUP}, - { 0x14, KEY_LAST}, /* Row 6 */ - { 0x15, KEY_DOWN}, - { 0x16, KEY_MUTE}, - { 0x17, KEY_VOLUMEDOWN}, -}; -struct ir_scancode_table ir_codes_ati_tv_wonder_hd_600_table = { - .scan = ir_codes_ati_tv_wonder_hd_600, - .size = ARRAY_SIZE(ir_codes_ati_tv_wonder_hd_600), -}; -EXPORT_SYMBOL_GPL(ir_codes_ati_tv_wonder_hd_600_table); - -/* DVBWorld remotes - Igor M. Liplianin <liplianin@me.by> - */ -static struct ir_scancode ir_codes_dm1105_nec[] = { - { 0x0a, KEY_POWER2}, /* power */ - { 0x0c, KEY_MUTE}, /* mute */ - { 0x11, KEY_1}, - { 0x12, KEY_2}, - { 0x13, KEY_3}, - { 0x14, KEY_4}, - { 0x15, KEY_5}, - { 0x16, KEY_6}, - { 0x17, KEY_7}, - { 0x18, KEY_8}, - { 0x19, KEY_9}, - { 0x10, KEY_0}, - { 0x1c, KEY_CHANNELUP}, /* ch+ */ - { 0x0f, KEY_CHANNELDOWN}, /* ch- */ - { 0x1a, KEY_VOLUMEUP}, /* vol+ */ - { 0x0e, KEY_VOLUMEDOWN}, /* vol- */ - { 0x04, KEY_RECORD}, /* rec */ - { 0x09, KEY_CHANNEL}, /* fav */ - { 0x08, KEY_BACKSPACE}, /* rewind */ - { 0x07, KEY_FASTFORWARD}, /* fast */ - { 0x0b, KEY_PAUSE}, /* pause */ - { 0x02, KEY_ESC}, /* cancel */ - { 0x03, KEY_TAB}, /* tab */ - { 0x00, KEY_UP}, /* up */ - { 0x1f, KEY_ENTER}, /* ok */ - { 0x01, KEY_DOWN}, /* down */ - { 0x05, KEY_RECORD}, /* cap */ - { 0x06, KEY_STOP}, /* stop */ - { 0x40, KEY_ZOOM}, /* full */ - { 0x1e, KEY_TV}, /* tvmode */ - { 0x1b, KEY_B}, /* recall */ -}; -struct ir_scancode_table ir_codes_dm1105_nec_table = { - .scan = ir_codes_dm1105_nec, - .size = ARRAY_SIZE(ir_codes_dm1105_nec), -}; -EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec_table); - -static struct ir_scancode ir_codes_tevii_nec[] = { - { 0x0a, KEY_POWER2}, - { 0x0c, KEY_MUTE}, - { 0x11, KEY_1}, - { 0x12, KEY_2}, - { 0x13, KEY_3}, - { 0x14, KEY_4}, - { 0x15, KEY_5}, - { 0x16, KEY_6}, - { 0x17, KEY_7}, - { 0x18, KEY_8}, - { 0x19, KEY_9}, - { 0x10, KEY_0}, - { 0x1c, KEY_MENU}, - { 0x0f, KEY_VOLUMEDOWN}, - { 0x1a, KEY_LAST}, - { 0x0e, KEY_OPEN}, - { 0x04, KEY_RECORD}, - { 0x09, KEY_VOLUMEUP}, - { 0x08, KEY_CHANNELUP}, - { 0x07, KEY_PVR}, - { 0x0b, KEY_TIME}, - { 0x02, KEY_RIGHT}, - { 0x03, KEY_LEFT}, - { 0x00, KEY_UP}, - { 0x1f, KEY_OK}, - { 0x01, KEY_DOWN}, - { 0x05, KEY_TUNER}, - { 0x06, KEY_CHANNELDOWN}, - { 0x40, KEY_PLAYPAUSE}, - { 0x1e, KEY_REWIND}, - { 0x1b, KEY_FAVORITES}, - { 0x1d, KEY_BACK}, - { 0x4d, KEY_FASTFORWARD}, - { 0x44, KEY_EPG}, - { 0x4c, KEY_INFO}, - { 0x41, KEY_AB}, - { 0x43, KEY_AUDIO}, - { 0x45, KEY_SUBTITLE}, - { 0x4a, KEY_LIST}, - { 0x46, KEY_F1}, - { 0x47, KEY_F2}, - { 0x5e, KEY_F3}, - { 0x5c, KEY_F4}, - { 0x52, KEY_F5}, - { 0x5a, KEY_F6}, - { 0x56, KEY_MODE}, - { 0x58, KEY_SWITCHVIDEOMODE}, -}; -struct ir_scancode_table ir_codes_tevii_nec_table = { - .scan = ir_codes_tevii_nec, - .size = ARRAY_SIZE(ir_codes_tevii_nec), -}; -EXPORT_SYMBOL_GPL(ir_codes_tevii_nec_table); - -static struct ir_scancode ir_codes_tbs_nec[] = { - { 0x04, KEY_POWER2}, /*power*/ - { 0x14, KEY_MUTE}, /*mute*/ - { 0x07, KEY_1}, - { 0x06, KEY_2}, - { 0x05, KEY_3}, - { 0x0b, KEY_4}, - { 0x0a, KEY_5}, - { 0x09, KEY_6}, - { 0x0f, KEY_7}, - { 0x0e, KEY_8}, - { 0x0d, KEY_9}, - { 0x12, KEY_0}, - { 0x16, KEY_CHANNELUP}, /*ch+*/ - { 0x11, KEY_CHANNELDOWN},/*ch-*/ - { 0x13, KEY_VOLUMEUP}, /*vol+*/ - { 0x0c, KEY_VOLUMEDOWN},/*vol-*/ - { 0x03, KEY_RECORD}, /*rec*/ - { 0x18, KEY_PAUSE}, /*pause*/ - { 0x19, KEY_OK}, /*ok*/ - { 0x1a, KEY_CAMERA}, /* snapshot */ - { 0x01, KEY_UP}, - { 0x10, KEY_LEFT}, - { 0x02, KEY_RIGHT}, - { 0x08, KEY_DOWN}, - { 0x15, KEY_FAVORITES}, - { 0x17, KEY_SUBTITLE}, - { 0x1d, KEY_ZOOM}, - { 0x1f, KEY_EXIT}, - { 0x1e, KEY_MENU}, - { 0x1c, KEY_EPG}, - { 0x00, KEY_PREVIOUS}, - { 0x1b, KEY_MODE}, -}; -struct ir_scancode_table ir_codes_tbs_nec_table = { - .scan = ir_codes_tbs_nec, - .size = ARRAY_SIZE(ir_codes_tbs_nec), -}; -EXPORT_SYMBOL_GPL(ir_codes_tbs_nec_table); - -/* Terratec Cinergy Hybrid T USB XS - Devin Heitmueller <dheitmueller@linuxtv.org> - */ -static struct ir_scancode ir_codes_terratec_cinergy_xs[] = { - { 0x41, KEY_HOME}, - { 0x01, KEY_POWER}, - { 0x42, KEY_MENU}, - { 0x02, KEY_1}, - { 0x03, KEY_2}, - { 0x04, KEY_3}, - { 0x43, KEY_SUBTITLE}, - { 0x05, KEY_4}, - { 0x06, KEY_5}, - { 0x07, KEY_6}, - { 0x44, KEY_TEXT}, - { 0x08, KEY_7}, - { 0x09, KEY_8}, - { 0x0a, KEY_9}, - { 0x45, KEY_DELETE}, - { 0x0b, KEY_TUNER}, - { 0x0c, KEY_0}, - { 0x0d, KEY_MODE}, - { 0x46, KEY_TV}, - { 0x47, KEY_DVD}, - { 0x49, KEY_VIDEO}, - { 0x4b, KEY_AUX}, - { 0x10, KEY_UP}, - { 0x11, KEY_LEFT}, - { 0x12, KEY_OK}, - { 0x13, KEY_RIGHT}, - { 0x14, KEY_DOWN}, - { 0x0f, KEY_EPG}, - { 0x16, KEY_INFO}, - { 0x4d, KEY_BACKSPACE}, - { 0x1c, KEY_VOLUMEUP}, - { 0x4c, KEY_PLAY}, - { 0x1b, KEY_CHANNELUP}, - { 0x1e, KEY_VOLUMEDOWN}, - { 0x1d, KEY_MUTE}, - { 0x1f, KEY_CHANNELDOWN}, - { 0x17, KEY_RED}, - { 0x18, KEY_GREEN}, - { 0x19, KEY_YELLOW}, - { 0x1a, KEY_BLUE}, - { 0x58, KEY_RECORD}, - { 0x48, KEY_STOP}, - { 0x40, KEY_PAUSE}, - { 0x54, KEY_LAST}, - { 0x4e, KEY_REWIND}, - { 0x4f, KEY_FASTFORWARD}, - { 0x5c, KEY_NEXT}, -}; -struct ir_scancode_table ir_codes_terratec_cinergy_xs_table = { - .scan = ir_codes_terratec_cinergy_xs, - .size = ARRAY_SIZE(ir_codes_terratec_cinergy_xs), -}; -EXPORT_SYMBOL_GPL(ir_codes_terratec_cinergy_xs_table); - -/* EVGA inDtube - Devin Heitmueller <devin.heitmueller@gmail.com> - */ -static struct ir_scancode ir_codes_evga_indtube[] = { - { 0x12, KEY_POWER}, - { 0x02, KEY_MODE}, /* TV */ - { 0x14, KEY_MUTE}, - { 0x1a, KEY_CHANNELUP}, - { 0x16, KEY_TV2}, /* PIP */ - { 0x1d, KEY_VOLUMEUP}, - { 0x05, KEY_CHANNELDOWN}, - { 0x0f, KEY_PLAYPAUSE}, - { 0x19, KEY_VOLUMEDOWN}, - { 0x1c, KEY_REWIND}, - { 0x0d, KEY_RECORD}, - { 0x18, KEY_FORWARD}, - { 0x1e, KEY_PREVIOUS}, - { 0x1b, KEY_STOP}, - { 0x1f, KEY_NEXT}, - { 0x13, KEY_CAMERA}, -}; -struct ir_scancode_table ir_codes_evga_indtube_table = { - .scan = ir_codes_evga_indtube, - .size = ARRAY_SIZE(ir_codes_evga_indtube), -}; -EXPORT_SYMBOL_GPL(ir_codes_evga_indtube_table); - -static struct ir_scancode ir_codes_videomate_s350[] = { - { 0x00, KEY_TV}, - { 0x01, KEY_DVD}, - { 0x04, KEY_RECORD}, - { 0x05, KEY_VIDEO}, /* TV/Video */ - { 0x07, KEY_STOP}, - { 0x08, KEY_PLAYPAUSE}, - { 0x0a, KEY_REWIND}, - { 0x0f, KEY_FASTFORWARD}, - { 0x10, KEY_CHANNELUP}, - { 0x12, KEY_VOLUMEUP}, - { 0x13, KEY_CHANNELDOWN}, - { 0x14, KEY_MUTE}, - { 0x15, KEY_VOLUMEDOWN}, - { 0x16, KEY_1}, - { 0x17, KEY_2}, - { 0x18, KEY_3}, - { 0x19, KEY_4}, - { 0x1a, KEY_5}, - { 0x1b, KEY_6}, - { 0x1c, KEY_7}, - { 0x1d, KEY_8}, - { 0x1e, KEY_9}, - { 0x1f, KEY_0}, - { 0x21, KEY_SLEEP}, - { 0x24, KEY_ZOOM}, - { 0x25, KEY_LAST}, /* Recall */ - { 0x26, KEY_SUBTITLE}, /* CC */ - { 0x27, KEY_LANGUAGE}, /* MTS */ - { 0x29, KEY_CHANNEL}, /* SURF */ - { 0x2b, KEY_A}, - { 0x2c, KEY_B}, - { 0x2f, KEY_CAMERA}, /* Snapshot */ - { 0x23, KEY_RADIO}, - { 0x02, KEY_PREVIOUSSONG}, - { 0x06, KEY_NEXTSONG}, - { 0x03, KEY_EPG}, - { 0x09, KEY_SETUP}, - { 0x22, KEY_BACKSPACE}, - { 0x0c, KEY_UP}, - { 0x0e, KEY_DOWN}, - { 0x0b, KEY_LEFT}, - { 0x0d, KEY_RIGHT}, - { 0x11, KEY_ENTER}, - { 0x20, KEY_TEXT}, -}; -struct ir_scancode_table ir_codes_videomate_s350_table = { - .scan = ir_codes_videomate_s350, - .size = ARRAY_SIZE(ir_codes_videomate_s350), -}; -EXPORT_SYMBOL_GPL(ir_codes_videomate_s350_table); - -/* GADMEI UTV330+ RM008Z remote - Shine Liu <shinel@foxmail.com> - */ -static struct ir_scancode ir_codes_gadmei_rm008z[] = { - { 0x14, KEY_POWER2}, /* POWER OFF */ - { 0x0c, KEY_MUTE}, /* MUTE */ - - { 0x18, KEY_TV}, /* TV */ - { 0x0e, KEY_VIDEO}, /* AV */ - { 0x0b, KEY_AUDIO}, /* SV */ - { 0x0f, KEY_RADIO}, /* FM */ - - { 0x00, KEY_1}, - { 0x01, KEY_2}, - { 0x02, KEY_3}, - { 0x03, KEY_4}, - { 0x04, KEY_5}, - { 0x05, KEY_6}, - { 0x06, KEY_7}, - { 0x07, KEY_8}, - { 0x08, KEY_9}, - { 0x09, KEY_0}, - { 0x0a, KEY_INFO}, /* OSD */ - { 0x1c, KEY_BACKSPACE}, /* LAST */ - - { 0x0d, KEY_PLAY}, /* PLAY */ - { 0x1e, KEY_CAMERA}, /* SNAPSHOT */ - { 0x1a, KEY_RECORD}, /* RECORD */ - { 0x17, KEY_STOP}, /* STOP */ - - { 0x1f, KEY_UP}, /* UP */ - { 0x44, KEY_DOWN}, /* DOWN */ - { 0x46, KEY_TAB}, /* BACK */ - { 0x4a, KEY_ZOOM}, /* FULLSECREEN */ - - { 0x10, KEY_VOLUMEUP}, /* VOLUMEUP */ - { 0x11, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */ - { 0x12, KEY_CHANNELUP}, /* CHANNELUP */ - { 0x13, KEY_CHANNELDOWN}, /* CHANNELDOWN */ - { 0x15, KEY_ENTER}, /* OK */ -}; -struct ir_scancode_table ir_codes_gadmei_rm008z_table = { - .scan = ir_codes_gadmei_rm008z, - .size = ARRAY_SIZE(ir_codes_gadmei_rm008z), -}; -EXPORT_SYMBOL_GPL(ir_codes_gadmei_rm008z_table); - -/************************************************************* - * COMPLETE SCANCODE TABLES - * Instead of just a partial scancode, the tables bellow - * contains the complete scancode and the receiver protocol - *************************************************************/ - -/* - * Hauppauge:the newer, gray remotes (seems there are multiple - * slightly different versions), shipped with cx88+ivtv cards. - * - * This table contains the complete RC5 code, instead of just the data part - */ -static struct ir_scancode ir_codes_rc5_hauppauge_new[] = { - /* Keys 0 to 9 */ - { 0x1e00, KEY_0 }, - { 0x1e01, KEY_1 }, - { 0x1e02, KEY_2 }, - { 0x1e03, KEY_3 }, - { 0x1e04, KEY_4 }, - { 0x1e05, KEY_5 }, - { 0x1e06, KEY_6 }, - { 0x1e07, KEY_7 }, - { 0x1e08, KEY_8 }, - { 0x1e09, KEY_9 }, - - { 0x1e0a, KEY_TEXT }, /* keypad asterisk as well */ - { 0x1e0b, KEY_RED }, /* red button */ - { 0x1e0c, KEY_RADIO }, - { 0x1e0d, KEY_MENU }, - { 0x1e0e, KEY_SUBTITLE }, /* also the # key */ - { 0x1e0f, KEY_MUTE }, - { 0x1e10, KEY_VOLUMEUP }, - { 0x1e11, KEY_VOLUMEDOWN }, - { 0x1e12, KEY_PREVIOUS }, /* previous channel */ - { 0x1e14, KEY_UP }, - { 0x1e15, KEY_DOWN }, - { 0x1e16, KEY_LEFT }, - { 0x1e17, KEY_RIGHT }, - { 0x1e18, KEY_VIDEO }, /* Videos */ - { 0x1e19, KEY_AUDIO }, /* Music */ - /* 0x1e1a: Pictures - presume this means - "Multimedia Home Platform" - - no "PICTURES" key in input.h - */ - { 0x1e1a, KEY_MHP }, - - { 0x1e1b, KEY_EPG }, /* Guide */ - { 0x1e1c, KEY_TV }, - { 0x1e1e, KEY_NEXTSONG }, /* skip >| */ - { 0x1e1f, KEY_EXIT }, /* back/exit */ - { 0x1e20, KEY_CHANNELUP }, /* channel / program + */ - { 0x1e21, KEY_CHANNELDOWN }, /* channel / program - */ - { 0x1e22, KEY_CHANNEL }, /* source (old black remote) */ - { 0x1e24, KEY_PREVIOUSSONG }, /* replay |< */ - { 0x1e25, KEY_ENTER }, /* OK */ - { 0x1e26, KEY_SLEEP }, /* minimize (old black remote) */ - { 0x1e29, KEY_BLUE }, /* blue key */ - { 0x1e2e, KEY_GREEN }, /* green button */ - { 0x1e30, KEY_PAUSE }, /* pause */ - { 0x1e32, KEY_REWIND }, /* backward << */ - { 0x1e34, KEY_FASTFORWARD }, /* forward >> */ - { 0x1e35, KEY_PLAY }, - { 0x1e36, KEY_STOP }, - { 0x1e37, KEY_RECORD }, /* recording */ - { 0x1e38, KEY_YELLOW }, /* yellow key */ - { 0x1e3b, KEY_SELECT }, /* top right button */ - { 0x1e3c, KEY_ZOOM }, /* full */ - { 0x1e3d, KEY_POWER }, /* system power (green button) */ -}; - -struct ir_scancode_table ir_codes_rc5_hauppauge_new_table = { - .scan = ir_codes_rc5_hauppauge_new, - .size = ARRAY_SIZE(ir_codes_rc5_hauppauge_new), - .ir_type = IR_TYPE_RC5, -}; -EXPORT_SYMBOL_GPL(ir_codes_rc5_hauppauge_new_table); - -/* Terratec Cinergy Hybrid T USB XS FM - Mauro Carvalho Chehab <mchehab@redhat.com> - */ -static struct ir_scancode ir_codes_nec_terratec_cinergy_xs[] = { - { 0x1441, KEY_HOME}, - { 0x1401, KEY_POWER2}, - - { 0x1442, KEY_MENU}, /* DVD menu */ - { 0x1443, KEY_SUBTITLE}, - { 0x1444, KEY_TEXT}, /* Teletext */ - { 0x1445, KEY_DELETE}, - - { 0x1402, KEY_1}, - { 0x1403, KEY_2}, - { 0x1404, KEY_3}, - { 0x1405, KEY_4}, - { 0x1406, KEY_5}, - { 0x1407, KEY_6}, - { 0x1408, KEY_7}, - { 0x1409, KEY_8}, - { 0x140a, KEY_9}, - { 0x140c, KEY_0}, - - { 0x140b, KEY_TUNER}, /* AV */ - { 0x140d, KEY_MODE}, /* A.B */ - - { 0x1446, KEY_TV}, - { 0x1447, KEY_DVD}, - { 0x1449, KEY_VIDEO}, - { 0x144a, KEY_RADIO}, /* Music */ - { 0x144b, KEY_CAMERA}, /* PIC */ - - { 0x1410, KEY_UP}, - { 0x1411, KEY_LEFT}, - { 0x1412, KEY_OK}, - { 0x1413, KEY_RIGHT}, - { 0x1414, KEY_DOWN}, - - { 0x140f, KEY_EPG}, - { 0x1416, KEY_INFO}, - { 0x144d, KEY_BACKSPACE}, - - { 0x141c, KEY_VOLUMEUP}, - { 0x141e, KEY_VOLUMEDOWN}, - - { 0x144c, KEY_PLAY}, - { 0x141d, KEY_MUTE}, - - { 0x141b, KEY_CHANNELUP}, - { 0x141f, KEY_CHANNELDOWN}, - - { 0x1417, KEY_RED}, - { 0x1418, KEY_GREEN}, - { 0x1419, KEY_YELLOW}, - { 0x141a, KEY_BLUE}, - - { 0x1458, KEY_RECORD}, - { 0x1448, KEY_STOP}, - { 0x1440, KEY_PAUSE}, - - { 0x1454, KEY_LAST}, - { 0x144e, KEY_REWIND}, - { 0x144f, KEY_FASTFORWARD}, - { 0x145c, KEY_NEXT}, -}; -struct ir_scancode_table ir_codes_nec_terratec_cinergy_xs_table = { - .scan = ir_codes_nec_terratec_cinergy_xs, - .size = ARRAY_SIZE(ir_codes_nec_terratec_cinergy_xs), - .ir_type = IR_TYPE_NEC, -}; -EXPORT_SYMBOL_GPL(ir_codes_nec_terratec_cinergy_xs_table); - - -/* Leadtek Winfast TV USB II Deluxe remote - Magnus Alm <magnus.alm@gmail.com> - */ -static struct ir_scancode ir_codes_winfast_usbii_deluxe[] = { - { 0x62, KEY_0}, - { 0x75, KEY_1}, - { 0x76, KEY_2}, - { 0x77, KEY_3}, - { 0x79, KEY_4}, - { 0x7a, KEY_5}, - { 0x7b, KEY_6}, - { 0x7d, KEY_7}, - { 0x7e, KEY_8}, - { 0x7f, KEY_9}, - - { 0x38, KEY_CAMERA}, /* SNAPSHOT */ - { 0x37, KEY_RECORD}, /* RECORD */ - { 0x35, KEY_TIME}, /* TIMESHIFT */ - - { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */ - { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */ - { 0x64, KEY_MUTE}, /* MUTE */ - - { 0x21, KEY_CHANNEL}, /* SURF */ - { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */ - { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */ - { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */ - - { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */ - - { 0x70, KEY_POWER2}, /* TV ON/OFF */ - - { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */ - { 0x3a, KEY_NEW}, /* PIP */ - { 0x73, KEY_ZOOM}, /* FULLSECREEN */ - - { 0x66, KEY_INFO}, /* OSD (DISPLAY) */ - - { 0x31, KEY_DOT}, /* '.' */ - { 0x63, KEY_ENTER}, /* ENTER */ - -}; -struct ir_scancode_table ir_codes_winfast_usbii_deluxe_table = { - .scan = ir_codes_winfast_usbii_deluxe, - .size = ARRAY_SIZE(ir_codes_winfast_usbii_deluxe), -}; -EXPORT_SYMBOL_GPL(ir_codes_winfast_usbii_deluxe_table); - -/* Kworld 315U - */ -static struct ir_scancode ir_codes_kworld_315u[] = { - { 0x6143, KEY_POWER }, - { 0x6101, KEY_TUNER }, /* source */ - { 0x610b, KEY_ZOOM }, - { 0x6103, KEY_POWER2 }, /* shutdown */ - - { 0x6104, KEY_1 }, - { 0x6108, KEY_2 }, - { 0x6102, KEY_3 }, - { 0x6109, KEY_CHANNELUP }, - - { 0x610f, KEY_4 }, - { 0x6105, KEY_5 }, - { 0x6106, KEY_6 }, - { 0x6107, KEY_CHANNELDOWN }, - - { 0x610c, KEY_7 }, - { 0x610d, KEY_8 }, - { 0x610a, KEY_9 }, - { 0x610e, KEY_VOLUMEUP }, - - { 0x6110, KEY_LAST }, - { 0x6111, KEY_0 }, - { 0x6112, KEY_ENTER }, - { 0x6113, KEY_VOLUMEDOWN }, - - { 0x6114, KEY_RECORD }, - { 0x6115, KEY_STOP }, - { 0x6116, KEY_PLAY }, - { 0x6117, KEY_MUTE }, - - { 0x6118, KEY_UP }, - { 0x6119, KEY_DOWN }, - { 0x611a, KEY_LEFT }, - { 0x611b, KEY_RIGHT }, - - { 0x611c, KEY_RED }, - { 0x611d, KEY_GREEN }, - { 0x611e, KEY_YELLOW }, - { 0x611f, KEY_BLUE }, -}; - -struct ir_scancode_table ir_codes_kworld_315u_table = { - .scan = ir_codes_kworld_315u, - .size = ARRAY_SIZE(ir_codes_kworld_315u), - .ir_type = IR_TYPE_NEC, -}; -EXPORT_SYMBOL_GPL(ir_codes_kworld_315u_table); diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c index bfca26d5182..9374a006f43 100644 --- a/drivers/media/IR/ir-keytable.c +++ b/drivers/media/IR/ir-keytable.c @@ -1,4 +1,4 @@ -/* ir-register.c - handle IR scancode->keycode tables +/* ir-keytable.c - handle IR scancode->keycode tables * * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com> * @@ -15,384 +15,408 @@ #include <linux/input.h> #include <linux/slab.h> -#include <media/ir-common.h> +#include "ir-core-priv.h" -#define IR_TAB_MIN_SIZE 32 -#define IR_TAB_MAX_SIZE 1024 +/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */ +#define IR_TAB_MIN_SIZE 256 +#define IR_TAB_MAX_SIZE 8192 + +/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */ +#define IR_KEYPRESS_TIMEOUT 250 /** - * ir_seek_table() - returns the element order on the table - * @rc_tab: the ir_scancode_table with the keymap to be used - * @scancode: the scancode that we're seeking + * ir_resize_table() - resizes a scancode table if necessary + * @rc_tab: the ir_scancode_table to resize + * @return: zero on success or a negative error code * - * This routine is used by the input routines when a key is pressed at the - * IR. The scancode is received and needs to be converted into a keycode. - * If the key is not found, it returns KEY_UNKNOWN. Otherwise, returns the - * corresponding keycode from the table. + * This routine will shrink the ir_scancode_table if it has lots of + * unused entries and grow it if it is full. */ -static int ir_seek_table(struct ir_scancode_table *rc_tab, u32 scancode) +static int ir_resize_table(struct ir_scancode_table *rc_tab) { - int rc; - unsigned long flags; - struct ir_scancode *keymap = rc_tab->scan; + unsigned int oldalloc = rc_tab->alloc; + unsigned int newalloc = oldalloc; + struct ir_scancode *oldscan = rc_tab->scan; + struct ir_scancode *newscan; + + if (rc_tab->size == rc_tab->len) { + /* All entries in use -> grow keytable */ + if (rc_tab->alloc >= IR_TAB_MAX_SIZE) + return -ENOMEM; - spin_lock_irqsave(&rc_tab->lock, flags); + newalloc *= 2; + IR_dprintk(1, "Growing table to %u bytes\n", newalloc); + } - /* FIXME: replace it by a binary search */ + if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) { + /* Less than 1/3 of entries in use -> shrink keytable */ + newalloc /= 2; + IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc); + } - for (rc = 0; rc < rc_tab->size; rc++) - if (keymap[rc].scancode == scancode) - goto exit; + if (newalloc == oldalloc) + return 0; - /* Not found */ - rc = -EINVAL; + newscan = kmalloc(newalloc, GFP_ATOMIC); + if (!newscan) { + IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc); + return -ENOMEM; + } -exit: - spin_unlock_irqrestore(&rc_tab->lock, flags); - return rc; + memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode)); + rc_tab->scan = newscan; + rc_tab->alloc = newalloc; + rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode); + kfree(oldscan); + return 0; } /** - * ir_roundup_tablesize() - gets an optimum value for the table size - * @n_elems: minimum number of entries to store keycodes - * - * This routine is used to choose the keycode table size. + * ir_do_setkeycode() - internal function to set a keycode in the + * scancode->keycode table + * @dev: the struct input_dev device descriptor + * @rc_tab: the struct ir_scancode_table to set the keycode in + * @scancode: the scancode for the ir command + * @keycode: the keycode for the ir command + * @resize: whether the keytable may be shrunk + * @return: -EINVAL if the keycode could not be inserted, otherwise zero. * - * In order to have some empty space for new keycodes, - * and knowing in advance that kmalloc allocates only power of two - * segments, it optimizes the allocated space to have some spare space - * for those new keycodes by using the maximum number of entries that - * will be effectively be allocated by kmalloc. - * In order to reduce the quantity of table resizes, it has a minimum - * table size of IR_TAB_MIN_SIZE. + * This routine is used internally to manipulate the scancode->keycode table. + * The caller has to hold @rc_tab->lock. */ -static int ir_roundup_tablesize(int n_elems) +static int ir_do_setkeycode(struct input_dev *dev, + struct ir_scancode_table *rc_tab, + unsigned scancode, unsigned keycode, + bool resize) { - size_t size; - - if (n_elems < IR_TAB_MIN_SIZE) - n_elems = IR_TAB_MIN_SIZE; + unsigned int i; + int old_keycode = KEY_RESERVED; + struct ir_input_dev *ir_dev = input_get_drvdata(dev); /* - * As kmalloc only allocates sizes of power of two, get as - * much entries as possible for the allocated memory segment + * Unfortunately, some hardware-based IR decoders don't provide + * all bits for the complete IR code. In general, they provide only + * the command part of the IR code. Yet, as it is possible to replace + * the provided IR with another one, it is needed to allow loading + * IR tables from other remotes. So, */ - size = roundup_pow_of_two(n_elems * sizeof(struct ir_scancode)); - n_elems = size / sizeof(struct ir_scancode); + if (ir_dev->props && ir_dev->props->scanmask) { + scancode &= ir_dev->props->scanmask; + } - return n_elems; + /* First check if we already have a mapping for this ir command */ + for (i = 0; i < rc_tab->len; i++) { + /* Keytable is sorted from lowest to highest scancode */ + if (rc_tab->scan[i].scancode > scancode) + break; + else if (rc_tab->scan[i].scancode < scancode) + continue; + + old_keycode = rc_tab->scan[i].keycode; + rc_tab->scan[i].keycode = keycode; + + /* Did the user wish to remove the mapping? */ + if (keycode == KEY_RESERVED || keycode == KEY_UNKNOWN) { + IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", + i, scancode); + rc_tab->len--; + memmove(&rc_tab->scan[i], &rc_tab->scan[i + 1], + (rc_tab->len - i) * sizeof(struct ir_scancode)); + } + + /* Possibly shrink the keytable, failure is not a problem */ + ir_resize_table(rc_tab); + break; + } + + if (old_keycode == KEY_RESERVED && keycode != KEY_RESERVED) { + /* No previous mapping found, we might need to grow the table */ + if (resize && ir_resize_table(rc_tab)) + return -ENOMEM; + + IR_dprintk(1, "#%d: New scan 0x%04x with key 0x%04x\n", + i, scancode, keycode); + + /* i is the proper index to insert our new keycode */ + memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i], + (rc_tab->len - i) * sizeof(struct ir_scancode)); + rc_tab->scan[i].scancode = scancode; + rc_tab->scan[i].keycode = keycode; + rc_tab->len++; + set_bit(keycode, dev->keybit); + } else { + IR_dprintk(1, "#%d: Replacing scan 0x%04x with key 0x%04x\n", + i, scancode, keycode); + /* A previous mapping was updated... */ + clear_bit(old_keycode, dev->keybit); + /* ...but another scancode might use the same keycode */ + for (i = 0; i < rc_tab->len; i++) { + if (rc_tab->scan[i].keycode == old_keycode) { + set_bit(old_keycode, dev->keybit); + break; + } + } + } + + return 0; } /** - * ir_copy_table() - copies a keytable, discarding the unused entries - * @destin: destin table - * @origin: origin table + * ir_setkeycode() - set a keycode in the scancode->keycode table + * @dev: the struct input_dev device descriptor + * @scancode: the desired scancode + * @keycode: result + * @return: -EINVAL if the keycode could not be inserted, otherwise zero. * - * Copies all entries where the keycode is not KEY_UNKNOWN/KEY_RESERVED - * Also copies table size and table protocol. - * NOTE: It shouldn't copy the lock field + * This routine is used to handle evdev EVIOCSKEY ioctl. */ - -static int ir_copy_table(struct ir_scancode_table *destin, - const struct ir_scancode_table *origin) +static int ir_setkeycode(struct input_dev *dev, + unsigned int scancode, unsigned int keycode) { - int i, j = 0; - - for (i = 0; i < origin->size; i++) { - if (origin->scan[i].keycode == KEY_UNKNOWN || - origin->scan[i].keycode == KEY_RESERVED) - continue; + int rc; + unsigned long flags; + struct ir_input_dev *ir_dev = input_get_drvdata(dev); + struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; - memcpy(&destin->scan[j], &origin->scan[i], sizeof(struct ir_scancode)); - j++; - } - destin->size = j; - destin->ir_type = origin->ir_type; + spin_lock_irqsave(&rc_tab->lock, flags); + rc = ir_do_setkeycode(dev, rc_tab, scancode, keycode, true); + spin_unlock_irqrestore(&rc_tab->lock, flags); + return rc; +} - IR_dprintk(1, "Copied %d scancodes to the new keycode table\n", destin->size); +/** + * ir_setkeytable() - sets several entries in the scancode->keycode table + * @dev: the struct input_dev device descriptor + * @to: the struct ir_scancode_table to copy entries to + * @from: the struct ir_scancode_table to copy entries from + * @return: -EINVAL if all keycodes could not be inserted, otherwise zero. + * + * This routine is used to handle table initialization. + */ +static int ir_setkeytable(struct input_dev *dev, + struct ir_scancode_table *to, + const struct ir_scancode_table *from) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(dev); + struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; + unsigned long flags; + unsigned int i; + int rc = 0; - return 0; + spin_lock_irqsave(&rc_tab->lock, flags); + for (i = 0; i < from->size; i++) { + rc = ir_do_setkeycode(dev, to, from->scan[i].scancode, + from->scan[i].keycode, false); + if (rc) + break; + } + spin_unlock_irqrestore(&rc_tab->lock, flags); + return rc; } /** - * ir_getkeycode() - get a keycode at the evdev scancode ->keycode table + * ir_getkeycode() - get a keycode from the scancode->keycode table * @dev: the struct input_dev device descriptor * @scancode: the desired scancode - * @keycode: the keycode to be retorned. + * @keycode: used to return the keycode, if found, or KEY_RESERVED + * @return: always returns zero. * * This routine is used to handle evdev EVIOCGKEY ioctl. - * If the key is not found, returns -EINVAL, otherwise, returns 0. */ static int ir_getkeycode(struct input_dev *dev, unsigned int scancode, unsigned int *keycode) { - int elem; + int start, end, mid; + unsigned long flags; + int key = KEY_RESERVED; struct ir_input_dev *ir_dev = input_get_drvdata(dev); struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; - elem = ir_seek_table(rc_tab, scancode); - if (elem >= 0) { - *keycode = rc_tab->scan[elem].keycode; - return 0; + spin_lock_irqsave(&rc_tab->lock, flags); + start = 0; + end = rc_tab->len - 1; + while (start <= end) { + mid = (start + end) / 2; + if (rc_tab->scan[mid].scancode < scancode) + start = mid + 1; + else if (rc_tab->scan[mid].scancode > scancode) + end = mid - 1; + else { + key = rc_tab->scan[mid].keycode; + break; + } } + spin_unlock_irqrestore(&rc_tab->lock, flags); - /* - * Scancode not found and table can't be expanded - */ - if (elem < 0 && rc_tab->size == IR_TAB_MAX_SIZE) - return -EINVAL; + if (key == KEY_RESERVED) + IR_dprintk(1, "unknown key for scancode 0x%04x\n", + scancode); - /* - * If is there extra space, returns KEY_RESERVED, - * otherwise, input core won't let ir_setkeycode to work - */ - *keycode = KEY_RESERVED; + *keycode = key; return 0; } /** - * ir_is_resize_needed() - Check if the table needs rezise - * @table: keycode table that may need to resize - * @n_elems: minimum number of entries to store keycodes - * - * Considering that kmalloc uses power of two storage areas, this - * routine detects if the real alloced size will change. If not, it - * just returns without doing nothing. Otherwise, it will extend or - * reduce the table size to meet the new needs. + * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode + * @input_dev: the struct input_dev descriptor of the device + * @scancode: the scancode that we're seeking * - * It returns 0 if no resize is needed, 1 otherwise. + * This routine is used by the input routines when a key is pressed at the + * IR. The scancode is received and needs to be converted into a keycode. + * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the + * corresponding keycode from the table. */ -static int ir_is_resize_needed(struct ir_scancode_table *table, int n_elems) +u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode) { - int cur_size = ir_roundup_tablesize(table->size); - int new_size = ir_roundup_tablesize(n_elems); - - if (cur_size == new_size) - return 0; + int keycode; - /* Resize is needed */ - return 1; + ir_getkeycode(dev, scancode, &keycode); + if (keycode != KEY_RESERVED) + IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n", + dev->name, scancode, keycode); + return keycode; } +EXPORT_SYMBOL_GPL(ir_g_keycode_from_table); /** - * ir_delete_key() - remove a keycode from the table - * @rc_tab: keycode table - * @elem: element to be removed + * ir_keyup() - generates input event to cleanup a key press + * @ir: the struct ir_input_dev descriptor of the device * + * This routine is used to signal that a key has been released on the + * remote control. It reports a keyup input event via input_report_key(). */ -static void ir_delete_key(struct ir_scancode_table *rc_tab, int elem) +static void ir_keyup(struct ir_input_dev *ir) { - unsigned long flags = 0; - int newsize = rc_tab->size - 1; - int resize = ir_is_resize_needed(rc_tab, newsize); - struct ir_scancode *oldkeymap = rc_tab->scan; - struct ir_scancode *newkeymap = NULL; - - if (resize) - newkeymap = kzalloc(ir_roundup_tablesize(newsize) * - sizeof(*newkeymap), GFP_ATOMIC); - - /* There's no memory for resize. Keep the old table */ - if (!resize || !newkeymap) { - newkeymap = oldkeymap; - - /* We'll modify the live table. Lock it */ - spin_lock_irqsave(&rc_tab->lock, flags); - } + if (!ir->keypressed) + return; - /* - * Copy the elements before the one that will be deleted - * if (!resize), both oldkeymap and newkeymap points - * to the same place, so, there's no need to copy - */ - if (resize && elem > 0) - memcpy(newkeymap, oldkeymap, - elem * sizeof(*newkeymap)); + IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode); + input_report_key(ir->input_dev, ir->last_keycode, 0); + input_sync(ir->input_dev); + ir->keypressed = false; +} + +/** + * ir_timer_keyup() - generates a keyup event after a timeout + * @cookie: a pointer to struct ir_input_dev passed to setup_timer() + * + * This routine will generate a keyup event some time after a keydown event + * is generated when no further activity has been detected. + */ +static void ir_timer_keyup(unsigned long cookie) +{ + struct ir_input_dev *ir = (struct ir_input_dev *)cookie; + unsigned long flags; /* - * Copy the other elements overwriting the element to be removed - * This operation applies to both resize and non-resize case + * ir->keyup_jiffies is used to prevent a race condition if a + * hardware interrupt occurs at this point and the keyup timer + * event is moved further into the future as a result. + * + * The timer will then be reactivated and this function called + * again in the future. We need to exit gracefully in that case + * to allow the input subsystem to do its auto-repeat magic or + * a keyup event might follow immediately after the keydown. */ - if (elem < newsize) - memcpy(&newkeymap[elem], &oldkeymap[elem + 1], - (newsize - elem) * sizeof(*newkeymap)); - - if (resize) { - /* - * As the copy happened to a temporary table, only here - * it needs to lock while replacing the table pointers - * to use the new table - */ - spin_lock_irqsave(&rc_tab->lock, flags); - rc_tab->size = newsize; - rc_tab->scan = newkeymap; - spin_unlock_irqrestore(&rc_tab->lock, flags); - - /* Frees the old keytable */ - kfree(oldkeymap); - } else { - rc_tab->size = newsize; - spin_unlock_irqrestore(&rc_tab->lock, flags); - } + spin_lock_irqsave(&ir->keylock, flags); + if (time_is_after_eq_jiffies(ir->keyup_jiffies)) + ir_keyup(ir); + spin_unlock_irqrestore(&ir->keylock, flags); } /** - * ir_insert_key() - insert a keycode at the table - * @rc_tab: keycode table - * @scancode: the desired scancode - * @keycode: the keycode to be retorned. + * ir_repeat() - notifies the IR core that a key is still pressed + * @dev: the struct input_dev descriptor of the device * + * This routine is used by IR decoders when a repeat message which does + * not include the necessary bits to reproduce the scancode has been + * received. */ -static int ir_insert_key(struct ir_scancode_table *rc_tab, - int scancode, int keycode) +void ir_repeat(struct input_dev *dev) { unsigned long flags; - int elem = rc_tab->size; - int newsize = rc_tab->size + 1; - int resize = ir_is_resize_needed(rc_tab, newsize); - struct ir_scancode *oldkeymap = rc_tab->scan; - struct ir_scancode *newkeymap; - - if (resize) { - newkeymap = kzalloc(ir_roundup_tablesize(newsize) * - sizeof(*newkeymap), GFP_ATOMIC); - if (!newkeymap) - return -ENOMEM; + struct ir_input_dev *ir = input_get_drvdata(dev); - memcpy(newkeymap, oldkeymap, - rc_tab->size * sizeof(*newkeymap)); - } else - newkeymap = oldkeymap; + spin_lock_irqsave(&ir->keylock, flags); - /* Stores the new code at the table */ - IR_dprintk(1, "#%d: New scan 0x%04x with key 0x%04x\n", - rc_tab->size, scancode, keycode); + if (!ir->keypressed) + goto out; - spin_lock_irqsave(&rc_tab->lock, flags); - rc_tab->size = newsize; - if (resize) { - rc_tab->scan = newkeymap; - kfree(oldkeymap); - } - newkeymap[elem].scancode = scancode; - newkeymap[elem].keycode = keycode; - spin_unlock_irqrestore(&rc_tab->lock, flags); + ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT); + mod_timer(&ir->timer_keyup, ir->keyup_jiffies); - return 0; +out: + spin_unlock_irqrestore(&ir->keylock, flags); } +EXPORT_SYMBOL_GPL(ir_repeat); /** - * ir_setkeycode() - set a keycode at the evdev scancode ->keycode table - * @dev: the struct input_dev device descriptor - * @scancode: the desired scancode - * @keycode: the keycode to be retorned. + * ir_keydown() - generates input event for a key press + * @dev: the struct input_dev descriptor of the device + * @scancode: the scancode that we're seeking + * @toggle: the toggle value (protocol dependent, if the protocol doesn't + * support toggle values, this should be set to zero) * - * This routine is used to handle evdev EVIOCSKEY ioctl. - * There's one caveat here: how can we increase the size of the table? - * If the key is not found, returns -EINVAL, otherwise, returns 0. + * This routine is used by the input routines when a key is pressed at the + * IR. It gets the keycode for a scancode and reports an input event via + * input_report_key(). */ -static int ir_setkeycode(struct input_dev *dev, - unsigned int scancode, unsigned int keycode) +void ir_keydown(struct input_dev *dev, int scancode, u8 toggle) { - int rc = 0; - struct ir_input_dev *ir_dev = input_get_drvdata(dev); - struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; - struct ir_scancode *keymap = rc_tab->scan; unsigned long flags; + struct ir_input_dev *ir = input_get_drvdata(dev); - /* - * Handle keycode table deletions - * - * If userspace is adding a KEY_UNKNOWN or KEY_RESERVED, - * deal as a trial to remove an existing scancode attribution - * if table become too big, reduce it to save space - */ - if (keycode == KEY_UNKNOWN || keycode == KEY_RESERVED) { - rc = ir_seek_table(rc_tab, scancode); - if (rc < 0) - return 0; - - IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", rc, scancode); - clear_bit(keymap[rc].keycode, dev->keybit); - ir_delete_key(rc_tab, rc); - - return 0; - } + u32 keycode = ir_g_keycode_from_table(dev, scancode); - /* - * Handle keycode replacements - * - * If the scancode exists, just replace by the new value - */ - rc = ir_seek_table(rc_tab, scancode); - if (rc >= 0) { - IR_dprintk(1, "#%d: Replacing scan 0x%04x with key 0x%04x\n", - rc, scancode, keycode); + spin_lock_irqsave(&ir->keylock, flags); - clear_bit(keymap[rc].keycode, dev->keybit); + /* Repeat event? */ + if (ir->keypressed && + ir->last_scancode == scancode && + ir->last_toggle == toggle) + goto set_timer; - spin_lock_irqsave(&rc_tab->lock, flags); - keymap[rc].keycode = keycode; - spin_unlock_irqrestore(&rc_tab->lock, flags); + /* Release old keypress */ + ir_keyup(ir); - set_bit(keycode, dev->keybit); + ir->last_scancode = scancode; + ir->last_toggle = toggle; + ir->last_keycode = keycode; - return 0; - } + if (keycode == KEY_RESERVED) + goto out; - /* - * Handle new scancode inserts - * - * reallocate table if needed and insert a new keycode - */ + /* Register a keypress */ + ir->keypressed = true; + IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n", + dev->name, keycode, scancode); + input_report_key(dev, ir->last_keycode, 1); + input_sync(dev); - /* Avoid growing the table indefinitely */ - if (rc_tab->size + 1 > IR_TAB_MAX_SIZE) - return -EINVAL; - - rc = ir_insert_key(rc_tab, scancode, keycode); - if (rc < 0) - return rc; - set_bit(keycode, dev->keybit); - - return 0; +set_timer: + ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT); + mod_timer(&ir->timer_keyup, ir->keyup_jiffies); +out: + spin_unlock_irqrestore(&ir->keylock, flags); } +EXPORT_SYMBOL_GPL(ir_keydown); -/** - * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode - * @input_dev: the struct input_dev descriptor of the device - * @scancode: the scancode that we're seeking - * - * This routine is used by the input routines when a key is pressed at the - * IR. The scancode is received and needs to be converted into a keycode. - * If the key is not found, it returns KEY_UNKNOWN. Otherwise, returns the - * corresponding keycode from the table. - */ -u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode) +static int ir_open(struct input_dev *input_dev) { - struct ir_input_dev *ir_dev = input_get_drvdata(dev); - struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; - struct ir_scancode *keymap = rc_tab->scan; - int elem; + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); - elem = ir_seek_table(rc_tab, scancode); - if (elem >= 0) { - IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n", - dev->name, scancode, keymap[elem].keycode); - - return rc_tab->scan[elem].keycode; - } + return ir_dev->props->open(ir_dev->props->priv); +} - printk(KERN_INFO "%s: unknown key for scancode 0x%04x\n", - dev->name, scancode); +static void ir_close(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); - /* Reports userspace that an unknown keycode were got */ - return KEY_RESERVED; + ir_dev->props->close(ir_dev->props->priv); } -EXPORT_SYMBOL_GPL(ir_g_keycode_from_table); /** - * ir_input_register() - sets the IR keycode table and add the handlers + * __ir_input_register() - sets the IR keycode table and add the handlers * for keymap table get/set * @input_dev: the struct input_dev descriptor of the device * @rc_tab: the struct ir_scancode_table table of scancode/keymap @@ -402,13 +426,13 @@ EXPORT_SYMBOL_GPL(ir_g_keycode_from_table); * It will register the input/evdev interface for the device and * register the syfs code for IR class */ -int ir_input_register(struct input_dev *input_dev, +int __ir_input_register(struct input_dev *input_dev, const struct ir_scancode_table *rc_tab, - const struct ir_dev_props *props) + const struct ir_dev_props *props, + const char *driver_name) { struct ir_input_dev *ir_dev; - struct ir_scancode *keymap = rc_tab->scan; - int i, rc; + int rc; if (rc_tab->scan == NULL || !rc_tab->size) return -EINVAL; @@ -417,57 +441,77 @@ int ir_input_register(struct input_dev *input_dev, if (!ir_dev) return -ENOMEM; - spin_lock_init(&ir_dev->rc_tab.lock); - - ir_dev->rc_tab.size = ir_roundup_tablesize(rc_tab->size); - ir_dev->rc_tab.scan = kzalloc(ir_dev->rc_tab.size * - sizeof(struct ir_scancode), GFP_KERNEL); - if (!ir_dev->rc_tab.scan) { - kfree(ir_dev); - return -ENOMEM; + ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name); + if (!ir_dev->driver_name) { + rc = -ENOMEM; + goto out_dev; } - IR_dprintk(1, "Allocated space for %d keycode entries (%zd bytes)\n", - ir_dev->rc_tab.size, - ir_dev->rc_tab.size * sizeof(ir_dev->rc_tab.scan)); + input_dev->getkeycode = ir_getkeycode; + input_dev->setkeycode = ir_setkeycode; + input_set_drvdata(input_dev, ir_dev); + ir_dev->input_dev = input_dev; - ir_copy_table(&ir_dev->rc_tab, rc_tab); - ir_dev->props = props; + spin_lock_init(&ir_dev->rc_tab.lock); + spin_lock_init(&ir_dev->keylock); + setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev); + + ir_dev->rc_tab.name = rc_tab->name; + ir_dev->rc_tab.ir_type = rc_tab->ir_type; + ir_dev->rc_tab.alloc = roundup_pow_of_two(rc_tab->size * + sizeof(struct ir_scancode)); + ir_dev->rc_tab.scan = kmalloc(ir_dev->rc_tab.alloc, GFP_KERNEL); + ir_dev->rc_tab.size = ir_dev->rc_tab.alloc / sizeof(struct ir_scancode); + if (props) { + ir_dev->props = props; + if (props->open) + input_dev->open = ir_open; + if (props->close) + input_dev->close = ir_close; + } - /* set the bits for the keys */ - IR_dprintk(1, "key map size: %d\n", rc_tab->size); - for (i = 0; i < rc_tab->size; i++) { - IR_dprintk(1, "#%d: setting bit for keycode 0x%04x\n", - i, keymap[i].keycode); - set_bit(keymap[i].keycode, input_dev->keybit); + if (!ir_dev->rc_tab.scan) { + rc = -ENOMEM; + goto out_name; } - clear_bit(0, input_dev->keybit); + + IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n", + ir_dev->rc_tab.size, ir_dev->rc_tab.alloc); set_bit(EV_KEY, input_dev->evbit); + set_bit(EV_REP, input_dev->evbit); - input_dev->getkeycode = ir_getkeycode; - input_dev->setkeycode = ir_setkeycode; - input_set_drvdata(input_dev, ir_dev); + if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) { + rc = -ENOMEM; + goto out_table; + } - rc = input_register_device(input_dev); + rc = ir_register_class(input_dev); if (rc < 0) - goto err; + goto out_table; - rc = ir_register_class(input_dev); - if (rc < 0) { - input_unregister_device(input_dev); - goto err; + if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) { + rc = ir_raw_event_register(input_dev); + if (rc < 0) + goto out_event; } + IR_dprintk(1, "Registered input device on %s for %s remote.\n", + driver_name, rc_tab->name); + return 0; -err: - kfree(rc_tab->scan); +out_event: + ir_unregister_class(input_dev); +out_table: + kfree(ir_dev->rc_tab.scan); +out_name: + kfree(ir_dev->driver_name); +out_dev: kfree(ir_dev); - input_set_drvdata(input_dev, NULL); return rc; } -EXPORT_SYMBOL_GPL(ir_input_register); +EXPORT_SYMBOL_GPL(__ir_input_register); /** * ir_input_unregister() - unregisters IR and frees resources @@ -475,9 +519,9 @@ EXPORT_SYMBOL_GPL(ir_input_register); * This routine is used to free memory and de-register interfaces. */ -void ir_input_unregister(struct input_dev *dev) +void ir_input_unregister(struct input_dev *input_dev) { - struct ir_input_dev *ir_dev = input_get_drvdata(dev); + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); struct ir_scancode_table *rc_tab; if (!ir_dev) @@ -485,15 +529,18 @@ void ir_input_unregister(struct input_dev *dev) IR_dprintk(1, "Freed keycode table\n"); + del_timer_sync(&ir_dev->timer_keyup); + if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) + ir_raw_event_unregister(input_dev); rc_tab = &ir_dev->rc_tab; rc_tab->size = 0; kfree(rc_tab->scan); rc_tab->scan = NULL; - ir_unregister_class(dev); + ir_unregister_class(input_dev); + kfree(ir_dev->driver_name); kfree(ir_dev); - input_unregister_device(dev); } EXPORT_SYMBOL_GPL(ir_input_unregister); diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c new file mode 100644 index 00000000000..ba79233112e --- /dev/null +++ b/drivers/media/IR/ir-nec-decoder.c @@ -0,0 +1,328 @@ +/* ir-nec-decoder.c - handle NEC IR Pulse/Space protocol + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitrev.h> +#include "ir-core-priv.h" + +#define NEC_NBITS 32 +#define NEC_UNIT 562500 /* ns */ +#define NEC_HEADER_PULSE (16 * NEC_UNIT) +#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */ +#define NEC_HEADER_SPACE (8 * NEC_UNIT) +#define NEC_REPEAT_SPACE (8 * NEC_UNIT) +#define NEC_BIT_PULSE (1 * NEC_UNIT) +#define NEC_BIT_0_SPACE (1 * NEC_UNIT) +#define NEC_BIT_1_SPACE (3 * NEC_UNIT) +#define NEC_TRAILER_PULSE (1 * NEC_UNIT) +#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */ + +/* Used to register nec_decoder clients */ +static LIST_HEAD(decoder_list); +static DEFINE_SPINLOCK(decoder_lock); + +enum nec_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_TRAILER_PULSE, + STATE_TRAILER_SPACE, +}; + +struct decoder_data { + struct list_head list; + struct ir_input_dev *ir_dev; + int enabled:1; + + /* State machine control */ + enum nec_state state; + u32 nec_bits; + unsigned count; +}; + + +/** + * get_decoder_data() - gets decoder data + * @input_dev: input device + * + * Returns the struct decoder_data that corresponds to a device + */ +static struct decoder_data *get_decoder_data(struct ir_input_dev *ir_dev) +{ + struct decoder_data *data = NULL; + + spin_lock(&decoder_lock); + list_for_each_entry(data, &decoder_list, list) { + if (data->ir_dev == ir_dev) + break; + } + spin_unlock(&decoder_lock); + return data; +} + +static ssize_t store_enabled(struct device *d, + struct device_attribute *mattr, + const char *buf, + size_t len) +{ + unsigned long value; + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (strict_strtoul(buf, 10, &value) || value > 1) + return -EINVAL; + + data->enabled = value; + + return len; +} + +static ssize_t show_enabled(struct device *d, + struct device_attribute *mattr, char *buf) +{ + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (data->enabled) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled); + +static struct attribute *decoder_attributes[] = { + &dev_attr_enabled.attr, + NULL +}; + +static struct attribute_group decoder_attribute_group = { + .name = "nec_decoder", + .attrs = decoder_attributes, +}; + +/** + * ir_nec_decode() - Decode one NEC pulse or space + * @input_dev: the struct input_dev descriptor of the device + * @duration: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev) +{ + struct decoder_data *data; + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + u32 scancode; + u8 address, not_address, command, not_command; + + data = get_decoder_data(ir_dev); + if (!data) + return -EINVAL; + + if (!data->enabled) + return 0; + + if (IS_RESET(ev)) { + data->state = STATE_INACTIVE; + return 0; + } + + IR_dprintk(2, "NEC decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2) && + !eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2)) + break; + + data->count = 0; + data->state = STATE_HEADER_SPACE; + return 0; + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) { + data->state = STATE_BIT_PULSE; + return 0; + } else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) { + ir_repeat(input_dev); + IR_dprintk(1, "Repeat last key\n"); + data->state = STATE_TRAILER_PULSE; + return 0; + } + + break; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2)) + break; + + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + data->nec_bits <<= 1; + if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2)) + data->nec_bits |= 1; + else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2)) + break; + data->count++; + + if (data->count == NEC_NBITS) + data->state = STATE_TRAILER_PULSE; + else + data->state = STATE_BIT_PULSE; + + return 0; + + case STATE_TRAILER_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2)) + break; + + data->state = STATE_TRAILER_SPACE; + return 0; + + case STATE_TRAILER_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2)) + break; + + address = bitrev8((data->nec_bits >> 24) & 0xff); + not_address = bitrev8((data->nec_bits >> 16) & 0xff); + command = bitrev8((data->nec_bits >> 8) & 0xff); + not_command = bitrev8((data->nec_bits >> 0) & 0xff); + + if ((command ^ not_command) != 0xff) { + IR_dprintk(1, "NEC checksum error: received 0x%08x\n", + data->nec_bits); + break; + } + + if ((address ^ not_address) != 0xff) { + /* Extended NEC */ + scancode = address << 16 | + not_address << 8 | + command; + IR_dprintk(1, "NEC (Ext) scancode 0x%06x\n", scancode); + } else { + /* Normal NEC */ + scancode = address << 8 | command; + IR_dprintk(1, "NEC scancode 0x%04x\n", scancode); + } + + ir_keydown(input_dev, scancode, 0); + data->state = STATE_INACTIVE; + return 0; + } + + IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static int ir_nec_register(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + struct decoder_data *data; + int rc; + + rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group); + if (rc < 0) + return rc; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + return -ENOMEM; + } + + data->ir_dev = ir_dev; + data->enabled = 1; + + spin_lock(&decoder_lock); + list_add_tail(&data->list, &decoder_list); + spin_unlock(&decoder_lock); + + return 0; +} + +static int ir_nec_unregister(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + static struct decoder_data *data; + + data = get_decoder_data(ir_dev); + if (!data) + return 0; + + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + + spin_lock(&decoder_lock); + list_del(&data->list); + spin_unlock(&decoder_lock); + + return 0; +} + +static struct ir_raw_handler nec_handler = { + .decode = ir_nec_decode, + .raw_register = ir_nec_register, + .raw_unregister = ir_nec_unregister, +}; + +static int __init ir_nec_decode_init(void) +{ + ir_raw_handler_register(&nec_handler); + + printk(KERN_INFO "IR NEC protocol handler initialized\n"); + return 0; +} + +static void __exit ir_nec_decode_exit(void) +{ + ir_raw_handler_unregister(&nec_handler); +} + +module_init(ir_nec_decode_init); +module_exit(ir_nec_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("NEC IR protocol decoder"); diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c new file mode 100644 index 00000000000..ea68a3f2eff --- /dev/null +++ b/drivers/media/IR/ir-raw-event.c @@ -0,0 +1,251 @@ +/* ir-raw-event.c - handle IR Pulse/Space event + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/workqueue.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include "ir-core-priv.h" + +/* Define the max number of pulse/space transitions to buffer */ +#define MAX_IR_EVENT_SIZE 512 + +/* Used to handle IR raw handler extensions */ +static LIST_HEAD(ir_raw_handler_list); +static DEFINE_SPINLOCK(ir_raw_handler_lock); + +/** + * RUN_DECODER() - runs an operation on all IR decoders + * @ops: IR raw handler operation to be called + * @arg: arguments to be passed to the callback + * + * Calls ir_raw_handler::ops for all registered IR handlers. It prevents + * new decode addition/removal while running, by locking ir_raw_handler_lock + * mutex. If an error occurs, it stops the ops. Otherwise, it returns a sum + * of the return codes. + */ +#define RUN_DECODER(ops, ...) ({ \ + struct ir_raw_handler *_ir_raw_handler; \ + int _sumrc = 0, _rc; \ + spin_lock(&ir_raw_handler_lock); \ + list_for_each_entry(_ir_raw_handler, &ir_raw_handler_list, list) { \ + if (_ir_raw_handler->ops) { \ + _rc = _ir_raw_handler->ops(__VA_ARGS__); \ + if (_rc < 0) \ + break; \ + _sumrc += _rc; \ + } \ + } \ + spin_unlock(&ir_raw_handler_lock); \ + _sumrc; \ +}) + +#ifdef MODULE +/* Used to load the decoders */ +static struct work_struct wq_load; +#endif + +static void ir_raw_event_work(struct work_struct *work) +{ + struct ir_raw_event ev; + struct ir_raw_event_ctrl *raw = + container_of(work, struct ir_raw_event_ctrl, rx_work); + + while (kfifo_out(&raw->kfifo, &ev, sizeof(ev)) == sizeof(ev)) + RUN_DECODER(decode, raw->input_dev, ev); +} + +int ir_raw_event_register(struct input_dev *input_dev) +{ + struct ir_input_dev *ir = input_get_drvdata(input_dev); + int rc; + + ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL); + if (!ir->raw) + return -ENOMEM; + + ir->raw->input_dev = input_dev; + INIT_WORK(&ir->raw->rx_work, ir_raw_event_work); + + rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE, + GFP_KERNEL); + if (rc < 0) { + kfree(ir->raw); + ir->raw = NULL; + return rc; + } + + rc = RUN_DECODER(raw_register, input_dev); + if (rc < 0) { + kfifo_free(&ir->raw->kfifo); + kfree(ir->raw); + ir->raw = NULL; + return rc; + } + + return rc; +} + +void ir_raw_event_unregister(struct input_dev *input_dev) +{ + struct ir_input_dev *ir = input_get_drvdata(input_dev); + + if (!ir->raw) + return; + + cancel_work_sync(&ir->raw->rx_work); + RUN_DECODER(raw_unregister, input_dev); + + kfifo_free(&ir->raw->kfifo); + kfree(ir->raw); + ir->raw = NULL; +} + +/** + * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders + * @input_dev: the struct input_dev device descriptor + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This routine (which may be called from an interrupt context) stores a + * pulse/space duration for the raw ir decoding state machines. Pulses are + * signalled as positive values and spaces as negative values. A zero value + * will reset the decoding state machines. + */ +int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev) +{ + struct ir_input_dev *ir = input_get_drvdata(input_dev); + + if (!ir->raw) + return -EINVAL; + + if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev)) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL_GPL(ir_raw_event_store); + +/** + * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space + * @input_dev: the struct input_dev device descriptor + * @type: the type of the event that has occurred + * + * This routine (which may be called from an interrupt context) is used to + * store the beginning of an ir pulse or space (or the start/end of ir + * reception) for the raw ir decoding state machines. This is used by + * hardware which does not provide durations directly but only interrupts + * (or similar events) on state change. + */ +int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type) +{ + struct ir_input_dev *ir = input_get_drvdata(input_dev); + ktime_t now; + s64 delta; /* ns */ + struct ir_raw_event ev; + int rc = 0; + + if (!ir->raw) + return -EINVAL; + + now = ktime_get(); + delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event)); + + /* Check for a long duration since last event or if we're + * being called for the first time, note that delta can't + * possibly be negative. + */ + ev.duration = 0; + if (delta > IR_MAX_DURATION || !ir->raw->last_type) + type |= IR_START_EVENT; + else + ev.duration = delta; + + if (type & IR_START_EVENT) + ir_raw_event_reset(input_dev); + else if (ir->raw->last_type & IR_SPACE) { + ev.pulse = false; + rc = ir_raw_event_store(input_dev, &ev); + } else if (ir->raw->last_type & IR_PULSE) { + ev.pulse = true; + rc = ir_raw_event_store(input_dev, &ev); + } else + return 0; + + ir->raw->last_event = now; + ir->raw->last_type = type; + return rc; +} +EXPORT_SYMBOL_GPL(ir_raw_event_store_edge); + +/** + * ir_raw_event_handle() - schedules the decoding of stored ir data + * @input_dev: the struct input_dev device descriptor + * + * This routine will signal the workqueue to start decoding stored ir data. + */ +void ir_raw_event_handle(struct input_dev *input_dev) +{ + struct ir_input_dev *ir = input_get_drvdata(input_dev); + + if (!ir->raw) + return; + + schedule_work(&ir->raw->rx_work); +} +EXPORT_SYMBOL_GPL(ir_raw_event_handle); + +/* + * Extension interface - used to register the IR decoders + */ + +int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler) +{ + spin_lock(&ir_raw_handler_lock); + list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list); + spin_unlock(&ir_raw_handler_lock); + return 0; +} +EXPORT_SYMBOL(ir_raw_handler_register); + +void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler) +{ + spin_lock(&ir_raw_handler_lock); + list_del(&ir_raw_handler->list); + spin_unlock(&ir_raw_handler_lock); +} +EXPORT_SYMBOL(ir_raw_handler_unregister); + +#ifdef MODULE +static void init_decoders(struct work_struct *work) +{ + /* Load the decoder modules */ + + load_nec_decode(); + load_rc5_decode(); + load_rc6_decode(); + load_jvc_decode(); + load_sony_decode(); + + /* If needed, we may later add some init code. In this case, + it is needed to change the CONFIG_MODULE test at ir-core.h + */ +} +#endif + +void ir_raw_init(void) +{ +#ifdef MODULE + INIT_WORK(&wq_load, init_decoders); + schedule_work(&wq_load); +#endif +} diff --git a/drivers/media/IR/ir-rc5-decoder.c b/drivers/media/IR/ir-rc5-decoder.c new file mode 100644 index 00000000000..23cdb1b1a3b --- /dev/null +++ b/drivers/media/IR/ir-rc5-decoder.c @@ -0,0 +1,324 @@ +/* ir-rc5-decoder.c - handle RC5(x) IR Pulse/Space protocol + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * This code handles 14 bits RC5 protocols and 20 bits RC5x protocols. + * There are other variants that use a different number of bits. + * This is currently unsupported. + * It considers a carrier of 36 kHz, with a total of 14/20 bits, where + * the first two bits are start bits, and a third one is a filing bit + */ + +#include "ir-core-priv.h" + +#define RC5_NBITS 14 +#define RC5X_NBITS 20 +#define CHECK_RC5X_NBITS 8 +#define RC5_UNIT 888888 /* ns */ +#define RC5_BIT_START (1 * RC5_UNIT) +#define RC5_BIT_END (1 * RC5_UNIT) +#define RC5X_SPACE (4 * RC5_UNIT) + +/* Used to register rc5_decoder clients */ +static LIST_HEAD(decoder_list); +static DEFINE_SPINLOCK(decoder_lock); + +enum rc5_state { + STATE_INACTIVE, + STATE_BIT_START, + STATE_BIT_END, + STATE_CHECK_RC5X, + STATE_FINISHED, +}; + +struct decoder_data { + struct list_head list; + struct ir_input_dev *ir_dev; + int enabled:1; + + /* State machine control */ + enum rc5_state state; + u32 rc5_bits; + struct ir_raw_event prev_ev; + unsigned count; + unsigned wanted_bits; +}; + + +/** + * get_decoder_data() - gets decoder data + * @input_dev: input device + * + * Returns the struct decoder_data that corresponds to a device + */ + +static struct decoder_data *get_decoder_data(struct ir_input_dev *ir_dev) +{ + struct decoder_data *data = NULL; + + spin_lock(&decoder_lock); + list_for_each_entry(data, &decoder_list, list) { + if (data->ir_dev == ir_dev) + break; + } + spin_unlock(&decoder_lock); + return data; +} + +static ssize_t store_enabled(struct device *d, + struct device_attribute *mattr, + const char *buf, + size_t len) +{ + unsigned long value; + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (strict_strtoul(buf, 10, &value) || value > 1) + return -EINVAL; + + data->enabled = value; + + return len; +} + +static ssize_t show_enabled(struct device *d, + struct device_attribute *mattr, char *buf) +{ + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (data->enabled) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled); + +static struct attribute *decoder_attributes[] = { + &dev_attr_enabled.attr, + NULL +}; + +static struct attribute_group decoder_attribute_group = { + .name = "rc5_decoder", + .attrs = decoder_attributes, +}; + +/** + * ir_rc5_decode() - Decode one RC-5 pulse or space + * @input_dev: the struct input_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev) +{ + struct decoder_data *data; + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + u8 toggle; + u32 scancode; + + data = get_decoder_data(ir_dev); + if (!data) + return -EINVAL; + + if (!data->enabled) + return 0; + + if (IS_RESET(ev)) { + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + data->state = STATE_BIT_START; + data->count = 1; + /* We just need enough bits to get to STATE_CHECK_RC5X */ + data->wanted_bits = RC5X_NBITS; + decrease_duration(&ev, RC5_BIT_START); + goto again; + + case STATE_BIT_START: + if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2)) + break; + + data->rc5_bits <<= 1; + if (!ev.pulse) + data->rc5_bits |= 1; + data->count++; + data->prev_ev = ev; + data->state = STATE_BIT_END; + return 0; + + case STATE_BIT_END: + if (!is_transition(&ev, &data->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else if (data->count == CHECK_RC5X_NBITS) + data->state = STATE_CHECK_RC5X; + else + data->state = STATE_BIT_START; + + decrease_duration(&ev, RC5_BIT_END); + goto again; + + case STATE_CHECK_RC5X: + if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) { + /* RC5X */ + data->wanted_bits = RC5X_NBITS; + decrease_duration(&ev, RC5X_SPACE); + } else { + /* RC5 */ + data->wanted_bits = RC5_NBITS; + } + data->state = STATE_BIT_START; + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + if (data->wanted_bits == RC5X_NBITS) { + /* RC5X */ + u8 xdata, command, system; + xdata = (data->rc5_bits & 0x0003F) >> 0; + command = (data->rc5_bits & 0x00FC0) >> 6; + system = (data->rc5_bits & 0x1F000) >> 12; + toggle = (data->rc5_bits & 0x20000) ? 1 : 0; + command += (data->rc5_bits & 0x01000) ? 0 : 0x40; + scancode = system << 16 | command << 8 | xdata; + + IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n", + scancode, toggle); + + } else { + /* RC5 */ + u8 command, system; + command = (data->rc5_bits & 0x0003F) >> 0; + system = (data->rc5_bits & 0x007C0) >> 6; + toggle = (data->rc5_bits & 0x00800) ? 1 : 0; + command += (data->rc5_bits & 0x01000) ? 0 : 0x40; + scancode = system << 8 | command; + + IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n", + scancode, toggle); + } + + ir_keydown(input_dev, scancode, toggle); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "RC5(x) decode failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static int ir_rc5_register(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + struct decoder_data *data; + int rc; + + rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group); + if (rc < 0) + return rc; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + return -ENOMEM; + } + + data->ir_dev = ir_dev; + data->enabled = 1; + + spin_lock(&decoder_lock); + list_add_tail(&data->list, &decoder_list); + spin_unlock(&decoder_lock); + + return 0; +} + +static int ir_rc5_unregister(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + static struct decoder_data *data; + + data = get_decoder_data(ir_dev); + if (!data) + return 0; + + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + + spin_lock(&decoder_lock); + list_del(&data->list); + spin_unlock(&decoder_lock); + + return 0; +} + +static struct ir_raw_handler rc5_handler = { + .decode = ir_rc5_decode, + .raw_register = ir_rc5_register, + .raw_unregister = ir_rc5_unregister, +}; + +static int __init ir_rc5_decode_init(void) +{ + ir_raw_handler_register(&rc5_handler); + + printk(KERN_INFO "IR RC5(x) protocol handler initialized\n"); + return 0; +} + +static void __exit ir_rc5_decode_exit(void) +{ + ir_raw_handler_unregister(&rc5_handler); +} + +module_init(ir_rc5_decode_init); +module_exit(ir_rc5_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("RC5(x) IR protocol decoder"); diff --git a/drivers/media/IR/ir-rc6-decoder.c b/drivers/media/IR/ir-rc6-decoder.c new file mode 100644 index 00000000000..2bf479f4f1b --- /dev/null +++ b/drivers/media/IR/ir-rc6-decoder.c @@ -0,0 +1,419 @@ +/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol + * + * Copyright (C) 2010 by David Härdeman <david@hardeman.nu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "ir-core-priv.h" + +/* + * This decoder currently supports: + * RC6-0-16 (standard toggle bit in header) + * RC6-6A-24 (no toggle bit) + * RC6-6A-32 (MCE version with toggle bit in body) + */ + +#define RC6_UNIT 444444 /* us */ +#define RC6_HEADER_NBITS 4 /* not including toggle bit */ +#define RC6_0_NBITS 16 +#define RC6_6A_SMALL_NBITS 24 +#define RC6_6A_LARGE_NBITS 32 +#define RC6_PREFIX_PULSE (6 * RC6_UNIT) +#define RC6_PREFIX_SPACE (2 * RC6_UNIT) +#define RC6_BIT_START (1 * RC6_UNIT) +#define RC6_BIT_END (1 * RC6_UNIT) +#define RC6_TOGGLE_START (2 * RC6_UNIT) +#define RC6_TOGGLE_END (2 * RC6_UNIT) +#define RC6_MODE_MASK 0x07 /* for the header bits */ +#define RC6_STARTBIT_MASK 0x08 /* for the header bits */ +#define RC6_6A_MCE_TOGGLE_MASK 0x8000 /* for the body bits */ + +/* Used to register rc6_decoder clients */ +static LIST_HEAD(decoder_list); +static DEFINE_SPINLOCK(decoder_lock); + +enum rc6_mode { + RC6_MODE_0, + RC6_MODE_6A, + RC6_MODE_UNKNOWN, +}; + +enum rc6_state { + STATE_INACTIVE, + STATE_PREFIX_SPACE, + STATE_HEADER_BIT_START, + STATE_HEADER_BIT_END, + STATE_TOGGLE_START, + STATE_TOGGLE_END, + STATE_BODY_BIT_START, + STATE_BODY_BIT_END, + STATE_FINISHED, +}; + +struct decoder_data { + struct list_head list; + struct ir_input_dev *ir_dev; + int enabled:1; + + /* State machine control */ + enum rc6_state state; + u8 header; + u32 body; + struct ir_raw_event prev_ev; + bool toggle; + unsigned count; + unsigned wanted_bits; +}; + + +/** + * get_decoder_data() - gets decoder data + * @input_dev: input device + * + * Returns the struct decoder_data that corresponds to a device + */ +static struct decoder_data *get_decoder_data(struct ir_input_dev *ir_dev) +{ + struct decoder_data *data = NULL; + + spin_lock(&decoder_lock); + list_for_each_entry(data, &decoder_list, list) { + if (data->ir_dev == ir_dev) + break; + } + spin_unlock(&decoder_lock); + return data; +} + +static ssize_t store_enabled(struct device *d, + struct device_attribute *mattr, + const char *buf, + size_t len) +{ + unsigned long value; + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (strict_strtoul(buf, 10, &value) || value > 1) + return -EINVAL; + + data->enabled = value; + + return len; +} + +static ssize_t show_enabled(struct device *d, + struct device_attribute *mattr, char *buf) +{ + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (data->enabled) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled); + +static struct attribute *decoder_attributes[] = { + &dev_attr_enabled.attr, + NULL +}; + +static struct attribute_group decoder_attribute_group = { + .name = "rc6_decoder", + .attrs = decoder_attributes, +}; + +static enum rc6_mode rc6_mode(struct decoder_data *data) { + switch (data->header & RC6_MODE_MASK) { + case 0: + return RC6_MODE_0; + case 6: + if (!data->toggle) + return RC6_MODE_6A; + /* fall through */ + default: + return RC6_MODE_UNKNOWN; + } +} + +/** + * ir_rc6_decode() - Decode one RC6 pulse or space + * @input_dev: the struct input_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev) +{ + struct decoder_data *data; + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + u32 scancode; + u8 toggle; + + data = get_decoder_data(ir_dev); + if (!data) + return -EINVAL; + + if (!data->enabled) + return 0; + + if (IS_RESET(ev)) { + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + /* Note: larger margin on first pulse since each RC6_UNIT + is quite short and some hardware takes some time to + adjust to the signal */ + if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT)) + break; + + data->state = STATE_PREFIX_SPACE; + data->count = 0; + return 0; + + case STATE_PREFIX_SPACE: + if (ev.pulse) + break; + + if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2)) + break; + + data->state = STATE_HEADER_BIT_START; + return 0; + + case STATE_HEADER_BIT_START: + if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2)) + break; + + data->header <<= 1; + if (ev.pulse) + data->header |= 1; + data->count++; + data->prev_ev = ev; + data->state = STATE_HEADER_BIT_END; + return 0; + + case STATE_HEADER_BIT_END: + if (!is_transition(&ev, &data->prev_ev)) + break; + + if (data->count == RC6_HEADER_NBITS) + data->state = STATE_TOGGLE_START; + else + data->state = STATE_HEADER_BIT_START; + + decrease_duration(&ev, RC6_BIT_END); + goto again; + + case STATE_TOGGLE_START: + if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2)) + break; + + data->toggle = ev.pulse; + data->prev_ev = ev; + data->state = STATE_TOGGLE_END; + return 0; + + case STATE_TOGGLE_END: + if (!is_transition(&ev, &data->prev_ev) || + !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2)) + break; + + if (!(data->header & RC6_STARTBIT_MASK)) { + IR_dprintk(1, "RC6 invalid start bit\n"); + break; + } + + data->state = STATE_BODY_BIT_START; + data->prev_ev = ev; + decrease_duration(&ev, RC6_TOGGLE_END); + data->count = 0; + + switch (rc6_mode(data)) { + case RC6_MODE_0: + data->wanted_bits = RC6_0_NBITS; + break; + case RC6_MODE_6A: + /* This might look weird, but we basically + check the value of the first body bit to + determine the number of bits in mode 6A */ + if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) || + geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) + data->wanted_bits = RC6_6A_LARGE_NBITS; + else + data->wanted_bits = RC6_6A_SMALL_NBITS; + break; + default: + IR_dprintk(1, "RC6 unknown mode\n"); + goto out; + } + goto again; + + case STATE_BODY_BIT_START: + if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2)) + break; + + data->body <<= 1; + if (ev.pulse) + data->body |= 1; + data->count++; + data->prev_ev = ev; + + data->state = STATE_BODY_BIT_END; + return 0; + + case STATE_BODY_BIT_END: + if (!is_transition(&ev, &data->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else + data->state = STATE_BODY_BIT_START; + + decrease_duration(&ev, RC6_BIT_END); + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + switch (rc6_mode(data)) { + case RC6_MODE_0: + scancode = data->body & 0xffff; + toggle = data->toggle; + IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n", + scancode, toggle); + break; + case RC6_MODE_6A: + if (data->wanted_bits == RC6_6A_LARGE_NBITS) { + toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0; + scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK; + } else { + toggle = 0; + scancode = data->body & 0xffffff; + } + + IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n", + scancode, toggle); + break; + default: + IR_dprintk(1, "RC6 unknown mode\n"); + goto out; + } + + ir_keydown(input_dev, scancode, toggle); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static int ir_rc6_register(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + struct decoder_data *data; + int rc; + + rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group); + if (rc < 0) + return rc; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + return -ENOMEM; + } + + data->ir_dev = ir_dev; + data->enabled = 1; + + spin_lock(&decoder_lock); + list_add_tail(&data->list, &decoder_list); + spin_unlock(&decoder_lock); + + return 0; +} + +static int ir_rc6_unregister(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + static struct decoder_data *data; + + data = get_decoder_data(ir_dev); + if (!data) + return 0; + + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + + spin_lock(&decoder_lock); + list_del(&data->list); + spin_unlock(&decoder_lock); + + return 0; +} + +static struct ir_raw_handler rc6_handler = { + .decode = ir_rc6_decode, + .raw_register = ir_rc6_register, + .raw_unregister = ir_rc6_unregister, +}; + +static int __init ir_rc6_decode_init(void) +{ + ir_raw_handler_register(&rc6_handler); + + printk(KERN_INFO "IR RC6 protocol handler initialized\n"); + return 0; +} + +static void __exit ir_rc6_decode_exit(void) +{ + ir_raw_handler_unregister(&rc6_handler); +} + +module_init(ir_rc6_decode_init); +module_exit(ir_rc6_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("RC6 IR protocol decoder"); diff --git a/drivers/media/IR/ir-sony-decoder.c b/drivers/media/IR/ir-sony-decoder.c new file mode 100644 index 00000000000..9f440c5c060 --- /dev/null +++ b/drivers/media/IR/ir-sony-decoder.c @@ -0,0 +1,312 @@ +/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol + * + * Copyright (C) 2010 by David Härdeman <david@hardeman.nu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitrev.h> +#include "ir-core-priv.h" + +#define SONY_UNIT 600000 /* ns */ +#define SONY_HEADER_PULSE (4 * SONY_UNIT) +#define SONY_HEADER_SPACE (1 * SONY_UNIT) +#define SONY_BIT_0_PULSE (1 * SONY_UNIT) +#define SONY_BIT_1_PULSE (2 * SONY_UNIT) +#define SONY_BIT_SPACE (1 * SONY_UNIT) +#define SONY_TRAILER_SPACE (10 * SONY_UNIT) /* minimum */ + +/* Used to register sony_decoder clients */ +static LIST_HEAD(decoder_list); +static DEFINE_SPINLOCK(decoder_lock); + +enum sony_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_FINISHED, +}; + +struct decoder_data { + struct list_head list; + struct ir_input_dev *ir_dev; + int enabled:1; + + /* State machine control */ + enum sony_state state; + u32 sony_bits; + unsigned count; +}; + + +/** + * get_decoder_data() - gets decoder data + * @input_dev: input device + * + * Returns the struct decoder_data that corresponds to a device + */ +static struct decoder_data *get_decoder_data(struct ir_input_dev *ir_dev) +{ + struct decoder_data *data = NULL; + + spin_lock(&decoder_lock); + list_for_each_entry(data, &decoder_list, list) { + if (data->ir_dev == ir_dev) + break; + } + spin_unlock(&decoder_lock); + return data; +} + +static ssize_t store_enabled(struct device *d, + struct device_attribute *mattr, + const char *buf, + size_t len) +{ + unsigned long value; + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (strict_strtoul(buf, 10, &value) || value > 1) + return -EINVAL; + + data->enabled = value; + + return len; +} + +static ssize_t show_enabled(struct device *d, + struct device_attribute *mattr, char *buf) +{ + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + struct decoder_data *data = get_decoder_data(ir_dev); + + if (!data) + return -EINVAL; + + if (data->enabled) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled); + +static struct attribute *decoder_attributes[] = { + &dev_attr_enabled.attr, + NULL +}; + +static struct attribute_group decoder_attribute_group = { + .name = "sony_decoder", + .attrs = decoder_attributes, +}; + +/** + * ir_sony_decode() - Decode one Sony pulse or space + * @input_dev: the struct input_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev) +{ + struct decoder_data *data; + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + u32 scancode; + u8 device, subdevice, function; + + data = get_decoder_data(ir_dev); + if (!data) + return -EINVAL; + + if (!data->enabled) + return 0; + + if (IS_RESET(ev)) { + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) + goto out; + + IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2)) + break; + + data->count = 0; + data->state = STATE_HEADER_SPACE; + return 0; + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2)) + break; + + data->state = STATE_BIT_PULSE; + return 0; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + data->sony_bits <<= 1; + if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2)) + data->sony_bits |= 1; + else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2)) + break; + + data->count++; + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2)) + break; + + decrease_duration(&ev, SONY_BIT_SPACE); + + if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) { + data->state = STATE_BIT_PULSE; + return 0; + } + + data->state = STATE_FINISHED; + /* Fall through */ + + case STATE_FINISHED: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2)) + break; + + switch (data->count) { + case 12: + device = bitrev8((data->sony_bits << 3) & 0xF8); + subdevice = 0; + function = bitrev8((data->sony_bits >> 4) & 0xFE); + break; + case 15: + device = bitrev8((data->sony_bits >> 0) & 0xFF); + subdevice = 0; + function = bitrev8((data->sony_bits >> 7) & 0xFD); + break; + case 20: + device = bitrev8((data->sony_bits >> 5) & 0xF8); + subdevice = bitrev8((data->sony_bits >> 0) & 0xFF); + function = bitrev8((data->sony_bits >> 12) & 0xFE); + break; + default: + IR_dprintk(1, "Sony invalid bitcount %u\n", data->count); + goto out; + } + + scancode = device << 16 | subdevice << 8 | function; + IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode); + ir_keydown(input_dev, scancode, 0); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static int ir_sony_register(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + struct decoder_data *data; + int rc; + + rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group); + if (rc < 0) + return rc; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + return -ENOMEM; + } + + data->ir_dev = ir_dev; + data->enabled = 1; + + spin_lock(&decoder_lock); + list_add_tail(&data->list, &decoder_list); + spin_unlock(&decoder_lock); + + return 0; +} + +static int ir_sony_unregister(struct input_dev *input_dev) +{ + struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); + static struct decoder_data *data; + + data = get_decoder_data(ir_dev); + if (!data) + return 0; + + sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group); + + spin_lock(&decoder_lock); + list_del(&data->list); + spin_unlock(&decoder_lock); + + return 0; +} + +static struct ir_raw_handler sony_handler = { + .decode = ir_sony_decode, + .raw_register = ir_sony_register, + .raw_unregister = ir_sony_unregister, +}; + +static int __init ir_sony_decode_init(void) +{ + ir_raw_handler_register(&sony_handler); + + printk(KERN_INFO "IR Sony protocol handler initialized\n"); + return 0; +} + +static void __exit ir_sony_decode_exit(void) +{ + ir_raw_handler_unregister(&sony_handler); +} + +module_init(ir_sony_decode_init); +module_exit(ir_sony_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("Sony IR protocol decoder"); diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c index e14e6c486b5..d7da63e16c9 100644 --- a/drivers/media/IR/ir-sysfs.c +++ b/drivers/media/IR/ir-sysfs.c @@ -1,6 +1,6 @@ -/* ir-register.c - handle IR scancode->keycode tables +/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc) * - * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,15 +15,23 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/device.h> -#include <media/ir-core.h> +#include "ir-core-priv.h" #define IRRCV_NUM_DEVICES 256 /* bit array to represent IR sysfs device number */ static unsigned long ir_core_dev_number; -/* class for /sys/class/irrcv */ -static struct class *ir_input_class; +/* class for /sys/class/rc */ +static char *ir_devnode(struct device *dev, mode_t *mode) +{ + return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev)); +} + +static struct class ir_input_class = { + .name = "rc", + .devnode = ir_devnode, +}; /** * show_protocol() - shows the current IR protocol @@ -32,7 +40,7 @@ static struct class *ir_input_class; * @buf: a pointer to the output buffer * * This routine is a callback routine for input read the IR protocol type. - * it is trigged by reading /sys/class/irrcv/irrcv?/current_protocol. + * it is trigged by reading /sys/class/rc/rc?/current_protocol. * It returns the protocol name, as understood by the driver. */ static ssize_t show_protocol(struct device *d, @@ -48,13 +56,17 @@ static ssize_t show_protocol(struct device *d, if (ir_type == IR_TYPE_UNKNOWN) s = "Unknown"; else if (ir_type == IR_TYPE_RC5) - s = "RC-5"; - else if (ir_type == IR_TYPE_PD) - s = "Pulse/distance"; + s = "rc-5"; else if (ir_type == IR_TYPE_NEC) - s = "NEC"; + s = "nec"; + else if (ir_type == IR_TYPE_RC6) + s = "rc6"; + else if (ir_type == IR_TYPE_JVC) + s = "jvc"; + else if (ir_type == IR_TYPE_SONY) + s = "sony"; else - s = "Other"; + s = "other"; return sprintf(buf, "%s\n", s); } @@ -67,7 +79,7 @@ static ssize_t show_protocol(struct device *d, * @len: length of the input buffer * * This routine is a callback routine for changing the IR protocol type. - * it is trigged by reading /sys/class/irrcv/irrcv?/current_protocol. + * it is trigged by reading /sys/class/rc/rc?/current_protocol. * It changes the IR the protocol name, if the IR type is recognized * by the driver. * If an unknown protocol name is used, returns -EINVAL. @@ -78,23 +90,24 @@ static ssize_t store_protocol(struct device *d, size_t len) { struct ir_input_dev *ir_dev = dev_get_drvdata(d); - u64 ir_type = IR_TYPE_UNKNOWN; + u64 ir_type = 0; int rc = -EINVAL; unsigned long flags; char *buf; - buf = strsep((char **) &data, "\n"); - - if (!strcasecmp(buf, "rc-5")) - ir_type = IR_TYPE_RC5; - else if (!strcasecmp(buf, "pd")) - ir_type = IR_TYPE_PD; - else if (!strcasecmp(buf, "nec")) - ir_type = IR_TYPE_NEC; + while ((buf = strsep((char **) &data, " \n")) != NULL) { + if (!strcasecmp(buf, "rc-5") || !strcasecmp(buf, "rc5")) + ir_type |= IR_TYPE_RC5; + if (!strcasecmp(buf, "nec")) + ir_type |= IR_TYPE_NEC; + if (!strcasecmp(buf, "jvc")) + ir_type |= IR_TYPE_JVC; + if (!strcasecmp(buf, "sony")) + ir_type |= IR_TYPE_SONY; + } - if (ir_type == IR_TYPE_UNKNOWN) { - IR_dprintk(1, "Error setting protocol to %lld\n", - (long long)ir_type); + if (!ir_type) { + IR_dprintk(1, "Unknown protocol\n"); return -EINVAL; } @@ -112,25 +125,87 @@ static ssize_t store_protocol(struct device *d, ir_dev->rc_tab.ir_type = ir_type; spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags); - IR_dprintk(1, "Current protocol is %lld\n", + IR_dprintk(1, "Current protocol(s) is(are) %lld\n", (long long)ir_type); return len; } +static ssize_t show_supported_protocols(struct device *d, + struct device_attribute *mattr, char *buf) +{ + char *orgbuf = buf; + struct ir_input_dev *ir_dev = dev_get_drvdata(d); + + /* FIXME: doesn't support multiple protocols at the same time */ + if (ir_dev->props->allowed_protos == IR_TYPE_UNKNOWN) + buf += sprintf(buf, "unknown "); + if (ir_dev->props->allowed_protos & IR_TYPE_RC5) + buf += sprintf(buf, "rc-5 "); + if (ir_dev->props->allowed_protos & IR_TYPE_NEC) + buf += sprintf(buf, "nec "); + if (buf == orgbuf) + buf += sprintf(buf, "other "); + + buf += sprintf(buf - 1, "\n"); + + return buf - orgbuf; +} + +#define ADD_HOTPLUG_VAR(fmt, val...) \ + do { \ + int err = add_uevent_var(env, fmt, val); \ + if (err) \ + return err; \ + } while (0) + +static int ir_dev_uevent(struct device *device, struct kobj_uevent_env *env) +{ + struct ir_input_dev *ir_dev = dev_get_drvdata(device); + + if (ir_dev->rc_tab.name) + ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name); + if (ir_dev->driver_name) + ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name); + + return 0; +} + /* * Static device attribute struct with the sysfs attributes for IR's */ -static DEVICE_ATTR(current_protocol, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(protocol, S_IRUGO | S_IWUSR, show_protocol, store_protocol); -static struct attribute *ir_dev_attrs[] = { - &dev_attr_current_protocol.attr, +static DEVICE_ATTR(supported_protocols, S_IRUGO | S_IWUSR, + show_supported_protocols, NULL); + +static struct attribute *ir_hw_dev_attrs[] = { + &dev_attr_protocol.attr, + &dev_attr_supported_protocols.attr, NULL, }; +static struct attribute_group ir_hw_dev_attr_grp = { + .attrs = ir_hw_dev_attrs, +}; + +static const struct attribute_group *ir_hw_dev_attr_groups[] = { + &ir_hw_dev_attr_grp, + NULL +}; + +static struct device_type rc_dev_type = { + .groups = ir_hw_dev_attr_groups, + .uevent = ir_dev_uevent, +}; + +static struct device_type ir_raw_dev_type = { + .uevent = ir_dev_uevent, +}; + /** - * ir_register_class() - creates the sysfs for /sys/class/irrcv/irrcv? + * ir_register_class() - creates the sysfs for /sys/class/rc/rc? * @input_dev: the struct input_dev descriptor of the device * * This routine is used to register the syfs code for IR class @@ -138,8 +213,7 @@ static struct attribute *ir_dev_attrs[] = { int ir_register_class(struct input_dev *input_dev) { int rc; - struct kobject *kobj; - + const char *path; struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); int devno = find_first_zero_bit(&ir_core_dev_number, IRRCV_NUM_DEVICES); @@ -147,19 +221,36 @@ int ir_register_class(struct input_dev *input_dev) if (unlikely(devno < 0)) return devno; - ir_dev->attr.attrs = ir_dev_attrs; - ir_dev->class_dev = device_create(ir_input_class, NULL, - input_dev->dev.devt, ir_dev, - "irrcv%d", devno); - kobj = &ir_dev->class_dev->kobj; - - printk(KERN_WARNING "Creating IR device %s\n", kobject_name(kobj)); - rc = sysfs_create_group(kobj, &ir_dev->attr); - if (unlikely(rc < 0)) { - device_destroy(ir_input_class, input_dev->dev.devt); - return -ENOMEM; + if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) + ir_dev->dev.type = &rc_dev_type; + else + ir_dev->dev.type = &ir_raw_dev_type; + + ir_dev->dev.class = &ir_input_class; + ir_dev->dev.parent = input_dev->dev.parent; + dev_set_name(&ir_dev->dev, "rc%d", devno); + dev_set_drvdata(&ir_dev->dev, ir_dev); + rc = device_register(&ir_dev->dev); + if (rc) + return rc; + + + input_dev->dev.parent = &ir_dev->dev; + rc = input_register_device(input_dev); + if (rc < 0) { + device_del(&ir_dev->dev); + return rc; } + __module_get(THIS_MODULE); + + path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL); + printk(KERN_INFO "%s: %s as %s\n", + dev_name(&ir_dev->dev), + input_dev->name ? input_dev->name : "Unspecified device", + path ? path : "N/A"); + kfree(path); + ir_dev->devno = devno; set_bit(devno, &ir_core_dev_number); @@ -168,7 +259,7 @@ int ir_register_class(struct input_dev *input_dev) /** * ir_unregister_class() - removes the sysfs for sysfs for - * /sys/class/irrcv/irrcv? + * /sys/class/rc/rc? * @input_dev: the struct input_dev descriptor of the device * * This routine is used to unregister the syfs code for IR class @@ -176,36 +267,35 @@ int ir_register_class(struct input_dev *input_dev) void ir_unregister_class(struct input_dev *input_dev) { struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); - struct kobject *kobj; clear_bit(ir_dev->devno, &ir_core_dev_number); + input_unregister_device(input_dev); + device_del(&ir_dev->dev); - kobj = &ir_dev->class_dev->kobj; - - sysfs_remove_group(kobj, &ir_dev->attr); - device_destroy(ir_input_class, input_dev->dev.devt); - - kfree(ir_dev->attr.name); + module_put(THIS_MODULE); } /* - * Init/exit code for the module. Basically, creates/removes /sys/class/irrcv + * Init/exit code for the module. Basically, creates/removes /sys/class/rc */ static int __init ir_core_init(void) { - ir_input_class = class_create(THIS_MODULE, "irrcv"); - if (IS_ERR(ir_input_class)) { - printk(KERN_ERR "ir_core: unable to register irrcv class\n"); - return PTR_ERR(ir_input_class); + int rc = class_register(&ir_input_class); + if (rc) { + printk(KERN_ERR "ir_core: unable to register rc class\n"); + return rc; } + /* Initialize/load the decoders/keymap code that will be used */ + ir_raw_init(); + return 0; } static void __exit ir_core_exit(void) { - class_destroy(ir_input_class); + class_unregister(&ir_input_class); } module_init(ir_core_init); diff --git a/drivers/media/IR/keymaps/Kconfig b/drivers/media/IR/keymaps/Kconfig new file mode 100644 index 00000000000..14b22f58f82 --- /dev/null +++ b/drivers/media/IR/keymaps/Kconfig @@ -0,0 +1,15 @@ +config RC_MAP + tristate "Compile Remote Controller keymap modules" + depends on IR_CORE + default y + + ---help--- + This option enables the compilation of lots of Remote + Controller tables. They are short tables, but if you + don't use a remote controller, or prefer to load the + tables on userspace, you should disable it. + + The ir-keytable program, available at v4l-utils package + provide the tool and the same RC maps for load from + userspace. Its available at + http://git.linuxtv.org/v4l-utils diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile new file mode 100644 index 00000000000..ec25258a955 --- /dev/null +++ b/drivers/media/IR/keymaps/Makefile @@ -0,0 +1,67 @@ +obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ + rc-apac-viewcomp.o \ + rc-asus-pc39.o \ + rc-ati-tv-wonder-hd-600.o \ + rc-avermedia-a16d.o \ + rc-avermedia.o \ + rc-avermedia-cardbus.o \ + rc-avermedia-dvbt.o \ + rc-avermedia-m135a-rm-jx.o \ + rc-avertv-303.o \ + rc-behold.o \ + rc-behold-columbus.o \ + rc-budget-ci-old.o \ + rc-cinergy-1400.o \ + rc-cinergy.o \ + rc-dm1105-nec.o \ + rc-dntv-live-dvb-t.o \ + rc-dntv-live-dvbt-pro.o \ + rc-empty.o \ + rc-em-terratec.o \ + rc-encore-enltv2.o \ + rc-encore-enltv.o \ + rc-encore-enltv-fm53.o \ + rc-evga-indtube.o \ + rc-eztv.o \ + rc-flydvb.o \ + rc-flyvideo.o \ + rc-fusionhdtv-mce.o \ + rc-gadmei-rm008z.o \ + rc-genius-tvgo-a11mce.o \ + rc-gotview7135.o \ + rc-hauppauge-new.o \ + rc-imon-mce.o \ + rc-imon-pad.o \ + rc-iodata-bctv7e.o \ + rc-kaiomy.o \ + rc-kworld-315u.o \ + rc-kworld-plus-tv-analog.o \ + rc-manli.o \ + rc-msi-tvanywhere.o \ + rc-msi-tvanywhere-plus.o \ + rc-nebula.o \ + rc-nec-terratec-cinergy-xs.o \ + rc-norwood.o \ + rc-npgtech.o \ + rc-pctv-sedna.o \ + rc-pinnacle-color.o \ + rc-pinnacle-grey.o \ + rc-pinnacle-pctv-hd.o \ + rc-pixelview.o \ + rc-pixelview-mk12.o \ + rc-pixelview-new.o \ + rc-powercolor-real-angel.o \ + rc-proteus-2309.o \ + rc-purpletv.o \ + rc-pv951.o \ + rc-rc5-hauppauge-new.o \ + rc-rc5-tv.o \ + rc-real-audio-220-32-keys.o \ + rc-tbs-nec.o \ + rc-terratec-cinergy-xs.o \ + rc-tevii-nec.o \ + rc-tt-1500.o \ + rc-videomate-s350.o \ + rc-videomate-tv-pvr.o \ + rc-winfast.o \ + rc-winfast-usbii-deluxe.o diff --git a/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c new file mode 100644 index 00000000000..b17283176ec --- /dev/null +++ b/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c @@ -0,0 +1,89 @@ +/* adstech-dvb-t-pci.h - Keytable for adstech_dvb_t_pci Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* ADS Tech Instant TV DVB-T PCI Remote */ + +static struct ir_scancode adstech_dvb_t_pci[] = { + /* Keys 0 to 9 */ + { 0x4d, KEY_0 }, + { 0x57, KEY_1 }, + { 0x4f, KEY_2 }, + { 0x53, KEY_3 }, + { 0x56, KEY_4 }, + { 0x4e, KEY_5 }, + { 0x5e, KEY_6 }, + { 0x54, KEY_7 }, + { 0x4c, KEY_8 }, + { 0x5c, KEY_9 }, + + { 0x5b, KEY_POWER }, + { 0x5f, KEY_MUTE }, + { 0x55, KEY_GOTO }, + { 0x5d, KEY_SEARCH }, + { 0x17, KEY_EPG }, /* Guide */ + { 0x1f, KEY_MENU }, + { 0x0f, KEY_UP }, + { 0x46, KEY_DOWN }, + { 0x16, KEY_LEFT }, + { 0x1e, KEY_RIGHT }, + { 0x0e, KEY_SELECT }, /* Enter */ + { 0x5a, KEY_INFO }, + { 0x52, KEY_EXIT }, + { 0x59, KEY_PREVIOUS }, + { 0x51, KEY_NEXT }, + { 0x58, KEY_REWIND }, + { 0x50, KEY_FORWARD }, + { 0x44, KEY_PLAYPAUSE }, + { 0x07, KEY_STOP }, + { 0x1b, KEY_RECORD }, + { 0x13, KEY_TUNER }, /* Live */ + { 0x0a, KEY_A }, + { 0x12, KEY_B }, + { 0x03, KEY_PROG1 }, /* 1 */ + { 0x01, KEY_PROG2 }, /* 2 */ + { 0x00, KEY_PROG3 }, /* 3 */ + { 0x06, KEY_DVD }, + { 0x48, KEY_AUX }, /* Photo */ + { 0x40, KEY_VIDEO }, + { 0x19, KEY_AUDIO }, /* Music */ + { 0x0b, KEY_CHANNELUP }, + { 0x08, KEY_CHANNELDOWN }, + { 0x15, KEY_VOLUMEUP }, + { 0x1c, KEY_VOLUMEDOWN }, +}; + +static struct rc_keymap adstech_dvb_t_pci_map = { + .map = { + .scan = adstech_dvb_t_pci, + .size = ARRAY_SIZE(adstech_dvb_t_pci), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ADSTECH_DVB_T_PCI, + } +}; + +static int __init init_rc_map_adstech_dvb_t_pci(void) +{ + return ir_register_map(&adstech_dvb_t_pci_map); +} + +static void __exit exit_rc_map_adstech_dvb_t_pci(void) +{ + ir_unregister_map(&adstech_dvb_t_pci_map); +} + +module_init(init_rc_map_adstech_dvb_t_pci) +module_exit(exit_rc_map_adstech_dvb_t_pci) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-apac-viewcomp.c b/drivers/media/IR/keymaps/rc-apac-viewcomp.c new file mode 100644 index 00000000000..0ef2b562baf --- /dev/null +++ b/drivers/media/IR/keymaps/rc-apac-viewcomp.c @@ -0,0 +1,80 @@ +/* apac-viewcomp.h - Keytable for apac_viewcomp Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Attila Kondoros <attila.kondoros@chello.hu> */ + +static struct ir_scancode apac_viewcomp[] = { + + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x00, KEY_0 }, + { 0x17, KEY_LAST }, /* +100 */ + { 0x0a, KEY_LIST }, /* recall */ + + + { 0x1c, KEY_TUNER }, /* TV/FM */ + { 0x15, KEY_SEARCH }, /* scan */ + { 0x12, KEY_POWER }, /* power */ + { 0x1f, KEY_VOLUMEDOWN }, /* vol up */ + { 0x1b, KEY_VOLUMEUP }, /* vol down */ + { 0x1e, KEY_CHANNELDOWN }, /* chn up */ + { 0x1a, KEY_CHANNELUP }, /* chn down */ + + { 0x11, KEY_VIDEO }, /* video */ + { 0x0f, KEY_ZOOM }, /* full screen */ + { 0x13, KEY_MUTE }, /* mute/unmute */ + { 0x10, KEY_TEXT }, /* min */ + + { 0x0d, KEY_STOP }, /* freeze */ + { 0x0e, KEY_RECORD }, /* record */ + { 0x1d, KEY_PLAYPAUSE }, /* stop */ + { 0x19, KEY_PLAY }, /* play */ + + { 0x16, KEY_GOTO }, /* osd */ + { 0x14, KEY_REFRESH }, /* default */ + { 0x0c, KEY_KPPLUS }, /* fine tune >>>> */ + { 0x18, KEY_KPMINUS }, /* fine tune <<<< */ +}; + +static struct rc_keymap apac_viewcomp_map = { + .map = { + .scan = apac_viewcomp, + .size = ARRAY_SIZE(apac_viewcomp), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_APAC_VIEWCOMP, + } +}; + +static int __init init_rc_map_apac_viewcomp(void) +{ + return ir_register_map(&apac_viewcomp_map); +} + +static void __exit exit_rc_map_apac_viewcomp(void) +{ + ir_unregister_map(&apac_viewcomp_map); +} + +module_init(init_rc_map_apac_viewcomp) +module_exit(exit_rc_map_apac_viewcomp) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-asus-pc39.c b/drivers/media/IR/keymaps/rc-asus-pc39.c new file mode 100644 index 00000000000..2aa068cd6c7 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-asus-pc39.c @@ -0,0 +1,91 @@ +/* asus-pc39.h - Keytable for asus_pc39 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Marc Fargas <telenieko@telenieko.com> + * this is the remote control that comes with the asus p7131 + * which has a label saying is "Model PC-39" + */ + +static struct ir_scancode asus_pc39[] = { + /* Keys 0 to 9 */ + { 0x15, KEY_0 }, + { 0x29, KEY_1 }, + { 0x2d, KEY_2 }, + { 0x2b, KEY_3 }, + { 0x09, KEY_4 }, + { 0x0d, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x31, KEY_7 }, + { 0x35, KEY_8 }, + { 0x33, KEY_9 }, + + { 0x3e, KEY_RADIO }, /* radio */ + { 0x03, KEY_MENU }, /* dvd/menu */ + { 0x2a, KEY_VOLUMEUP }, + { 0x19, KEY_VOLUMEDOWN }, + { 0x37, KEY_UP }, + { 0x3b, KEY_DOWN }, + { 0x27, KEY_LEFT }, + { 0x2f, KEY_RIGHT }, + { 0x25, KEY_VIDEO }, /* video */ + { 0x39, KEY_AUDIO }, /* music */ + + { 0x21, KEY_TV }, /* tv */ + { 0x1d, KEY_EXIT }, /* back */ + { 0x0a, KEY_CHANNELUP }, /* channel / program + */ + { 0x1b, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x1a, KEY_ENTER }, /* enter */ + + { 0x06, KEY_PAUSE }, /* play/pause */ + { 0x1e, KEY_PREVIOUS }, /* rew */ + { 0x26, KEY_NEXT }, /* forward */ + { 0x0e, KEY_REWIND }, /* backward << */ + { 0x3a, KEY_FASTFORWARD }, /* forward >> */ + { 0x36, KEY_STOP }, + { 0x2e, KEY_RECORD }, /* recording */ + { 0x16, KEY_POWER }, /* the button that reads "close" */ + + { 0x11, KEY_ZOOM }, /* full screen */ + { 0x13, KEY_MACRO }, /* recall */ + { 0x23, KEY_HOME }, /* home */ + { 0x05, KEY_PVR }, /* picture */ + { 0x3d, KEY_MUTE }, /* mute */ + { 0x01, KEY_DVD }, /* dvd */ +}; + +static struct rc_keymap asus_pc39_map = { + .map = { + .scan = asus_pc39, + .size = ARRAY_SIZE(asus_pc39), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ASUS_PC39, + } +}; + +static int __init init_rc_map_asus_pc39(void) +{ + return ir_register_map(&asus_pc39_map); +} + +static void __exit exit_rc_map_asus_pc39(void) +{ + ir_unregister_map(&asus_pc39_map); +} + +module_init(init_rc_map_asus_pc39) +module_exit(exit_rc_map_asus_pc39) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c new file mode 100644 index 00000000000..8edfd293d01 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c @@ -0,0 +1,69 @@ +/* ati-tv-wonder-hd-600.h - Keytable for ati_tv_wonder_hd_600 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* ATI TV Wonder HD 600 USB + Devin Heitmueller <devin.heitmueller@gmail.com> + */ + +static struct ir_scancode ati_tv_wonder_hd_600[] = { + { 0x00, KEY_RECORD}, /* Row 1 */ + { 0x01, KEY_PLAYPAUSE}, + { 0x02, KEY_STOP}, + { 0x03, KEY_POWER}, + { 0x04, KEY_PREVIOUS}, /* Row 2 */ + { 0x05, KEY_REWIND}, + { 0x06, KEY_FORWARD}, + { 0x07, KEY_NEXT}, + { 0x08, KEY_EPG}, /* Row 3 */ + { 0x09, KEY_HOME}, + { 0x0a, KEY_MENU}, + { 0x0b, KEY_CHANNELUP}, + { 0x0c, KEY_BACK}, /* Row 4 */ + { 0x0d, KEY_UP}, + { 0x0e, KEY_INFO}, + { 0x0f, KEY_CHANNELDOWN}, + { 0x10, KEY_LEFT}, /* Row 5 */ + { 0x11, KEY_SELECT}, + { 0x12, KEY_RIGHT}, + { 0x13, KEY_VOLUMEUP}, + { 0x14, KEY_LAST}, /* Row 6 */ + { 0x15, KEY_DOWN}, + { 0x16, KEY_MUTE}, + { 0x17, KEY_VOLUMEDOWN}, +}; + +static struct rc_keymap ati_tv_wonder_hd_600_map = { + .map = { + .scan = ati_tv_wonder_hd_600, + .size = ARRAY_SIZE(ati_tv_wonder_hd_600), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ATI_TV_WONDER_HD_600, + } +}; + +static int __init init_rc_map_ati_tv_wonder_hd_600(void) +{ + return ir_register_map(&ati_tv_wonder_hd_600_map); +} + +static void __exit exit_rc_map_ati_tv_wonder_hd_600(void) +{ + ir_unregister_map(&ati_tv_wonder_hd_600_map); +} + +module_init(init_rc_map_ati_tv_wonder_hd_600) +module_exit(exit_rc_map_ati_tv_wonder_hd_600) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-avermedia-a16d.c b/drivers/media/IR/keymaps/rc-avermedia-a16d.c new file mode 100644 index 00000000000..12f043587f2 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-avermedia-a16d.c @@ -0,0 +1,75 @@ +/* avermedia-a16d.h - Keytable for avermedia_a16d Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode avermedia_a16d[] = { + { 0x20, KEY_LIST}, + { 0x00, KEY_POWER}, + { 0x28, KEY_1}, + { 0x18, KEY_2}, + { 0x38, KEY_3}, + { 0x24, KEY_4}, + { 0x14, KEY_5}, + { 0x34, KEY_6}, + { 0x2c, KEY_7}, + { 0x1c, KEY_8}, + { 0x3c, KEY_9}, + { 0x12, KEY_SUBTITLE}, + { 0x22, KEY_0}, + { 0x32, KEY_REWIND}, + { 0x3a, KEY_SHUFFLE}, + { 0x02, KEY_PRINT}, + { 0x11, KEY_CHANNELDOWN}, + { 0x31, KEY_CHANNELUP}, + { 0x0c, KEY_ZOOM}, + { 0x1e, KEY_VOLUMEDOWN}, + { 0x3e, KEY_VOLUMEUP}, + { 0x0a, KEY_MUTE}, + { 0x04, KEY_AUDIO}, + { 0x26, KEY_RECORD}, + { 0x06, KEY_PLAY}, + { 0x36, KEY_STOP}, + { 0x16, KEY_PAUSE}, + { 0x2e, KEY_REWIND}, + { 0x0e, KEY_FASTFORWARD}, + { 0x30, KEY_TEXT}, + { 0x21, KEY_GREEN}, + { 0x01, KEY_BLUE}, + { 0x08, KEY_EPG}, + { 0x2a, KEY_MENU}, +}; + +static struct rc_keymap avermedia_a16d_map = { + .map = { + .scan = avermedia_a16d, + .size = ARRAY_SIZE(avermedia_a16d), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA_A16D, + } +}; + +static int __init init_rc_map_avermedia_a16d(void) +{ + return ir_register_map(&avermedia_a16d_map); +} + +static void __exit exit_rc_map_avermedia_a16d(void) +{ + ir_unregister_map(&avermedia_a16d_map); +} + +module_init(init_rc_map_avermedia_a16d) +module_exit(exit_rc_map_avermedia_a16d) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-avermedia-cardbus.c b/drivers/media/IR/keymaps/rc-avermedia-cardbus.c new file mode 100644 index 00000000000..2a945b02e8c --- /dev/null +++ b/drivers/media/IR/keymaps/rc-avermedia-cardbus.c @@ -0,0 +1,97 @@ +/* avermedia-cardbus.h - Keytable for avermedia_cardbus Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Oldrich Jedlicka <oldium.pro@seznam.cz> */ + +static struct ir_scancode avermedia_cardbus[] = { + { 0x00, KEY_POWER }, + { 0x01, KEY_TUNER }, /* TV/FM */ + { 0x03, KEY_TEXT }, /* Teletext */ + { 0x04, KEY_EPG }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x08, KEY_AUDIO }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0c, KEY_ZOOM }, /* Full screen */ + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + { 0x10, KEY_PAGEUP }, /* 16-CH PREV */ + { 0x11, KEY_0 }, + { 0x12, KEY_INFO }, + { 0x13, KEY_AGAIN }, /* CH RTN - channel return */ + { 0x14, KEY_MUTE }, + { 0x15, KEY_EDIT }, /* Autoscan */ + { 0x17, KEY_SAVE }, /* Screenshot */ + { 0x18, KEY_PLAYPAUSE }, + { 0x19, KEY_RECORD }, + { 0x1a, KEY_PLAY }, + { 0x1b, KEY_STOP }, + { 0x1c, KEY_FASTFORWARD }, + { 0x1d, KEY_REWIND }, + { 0x1e, KEY_VOLUMEDOWN }, + { 0x1f, KEY_VOLUMEUP }, + { 0x22, KEY_SLEEP }, /* Sleep */ + { 0x23, KEY_ZOOM }, /* Aspect */ + { 0x26, KEY_SCREEN }, /* Pos */ + { 0x27, KEY_ANGLE }, /* Size */ + { 0x28, KEY_SELECT }, /* Select */ + { 0x29, KEY_BLUE }, /* Blue/Picture */ + { 0x2a, KEY_BACKSPACE }, /* Back */ + { 0x2b, KEY_MEDIA }, /* PIP (Picture-in-picture) */ + { 0x2c, KEY_DOWN }, + { 0x2e, KEY_DOT }, + { 0x2f, KEY_TV }, /* Live TV */ + { 0x32, KEY_LEFT }, + { 0x33, KEY_CLEAR }, /* Clear */ + { 0x35, KEY_RED }, /* Red/TV */ + { 0x36, KEY_UP }, + { 0x37, KEY_HOME }, /* Home */ + { 0x39, KEY_GREEN }, /* Green/Video */ + { 0x3d, KEY_YELLOW }, /* Yellow/Music */ + { 0x3e, KEY_OK }, /* Ok */ + { 0x3f, KEY_RIGHT }, + { 0x40, KEY_NEXT }, /* Next */ + { 0x41, KEY_PREVIOUS }, /* Previous */ + { 0x42, KEY_CHANNELDOWN }, /* Channel down */ + { 0x43, KEY_CHANNELUP }, /* Channel up */ +}; + +static struct rc_keymap avermedia_cardbus_map = { + .map = { + .scan = avermedia_cardbus, + .size = ARRAY_SIZE(avermedia_cardbus), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA_CARDBUS, + } +}; + +static int __init init_rc_map_avermedia_cardbus(void) +{ + return ir_register_map(&avermedia_cardbus_map); +} + +static void __exit exit_rc_map_avermedia_cardbus(void) +{ + ir_unregister_map(&avermedia_cardbus_map); +} + +module_init(init_rc_map_avermedia_cardbus) +module_exit(exit_rc_map_avermedia_cardbus) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-avermedia-dvbt.c b/drivers/media/IR/keymaps/rc-avermedia-dvbt.c new file mode 100644 index 00000000000..39dde622287 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-avermedia-dvbt.c @@ -0,0 +1,78 @@ +/* avermedia-dvbt.h - Keytable for avermedia_dvbt Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Matt Jesson <dvb@jesson.eclipse.co.uk */ + +static struct ir_scancode avermedia_dvbt[] = { + { 0x28, KEY_0 }, /* '0' / 'enter' */ + { 0x22, KEY_1 }, /* '1' */ + { 0x12, KEY_2 }, /* '2' / 'up arrow' */ + { 0x32, KEY_3 }, /* '3' */ + { 0x24, KEY_4 }, /* '4' / 'left arrow' */ + { 0x14, KEY_5 }, /* '5' */ + { 0x34, KEY_6 }, /* '6' / 'right arrow' */ + { 0x26, KEY_7 }, /* '7' */ + { 0x16, KEY_8 }, /* '8' / 'down arrow' */ + { 0x36, KEY_9 }, /* '9' */ + + { 0x20, KEY_LIST }, /* 'source' */ + { 0x10, KEY_TEXT }, /* 'teletext' */ + { 0x00, KEY_POWER }, /* 'power' */ + { 0x04, KEY_AUDIO }, /* 'audio' */ + { 0x06, KEY_ZOOM }, /* 'full screen' */ + { 0x18, KEY_VIDEO }, /* 'display' */ + { 0x38, KEY_SEARCH }, /* 'loop' */ + { 0x08, KEY_INFO }, /* 'preview' */ + { 0x2a, KEY_REWIND }, /* 'backward <<' */ + { 0x1a, KEY_FASTFORWARD }, /* 'forward >>' */ + { 0x3a, KEY_RECORD }, /* 'capture' */ + { 0x0a, KEY_MUTE }, /* 'mute' */ + { 0x2c, KEY_RECORD }, /* 'record' */ + { 0x1c, KEY_PAUSE }, /* 'pause' */ + { 0x3c, KEY_STOP }, /* 'stop' */ + { 0x0c, KEY_PLAY }, /* 'play' */ + { 0x2e, KEY_RED }, /* 'red' */ + { 0x01, KEY_BLUE }, /* 'blue' / 'cancel' */ + { 0x0e, KEY_YELLOW }, /* 'yellow' / 'ok' */ + { 0x21, KEY_GREEN }, /* 'green' */ + { 0x11, KEY_CHANNELDOWN }, /* 'channel -' */ + { 0x31, KEY_CHANNELUP }, /* 'channel +' */ + { 0x1e, KEY_VOLUMEDOWN }, /* 'volume -' */ + { 0x3e, KEY_VOLUMEUP }, /* 'volume +' */ +}; + +static struct rc_keymap avermedia_dvbt_map = { + .map = { + .scan = avermedia_dvbt, + .size = ARRAY_SIZE(avermedia_dvbt), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA_DVBT, + } +}; + +static int __init init_rc_map_avermedia_dvbt(void) +{ + return ir_register_map(&avermedia_dvbt_map); +} + +static void __exit exit_rc_map_avermedia_dvbt(void) +{ + ir_unregister_map(&avermedia_dvbt_map); +} + +module_init(init_rc_map_avermedia_dvbt) +module_exit(exit_rc_map_avermedia_dvbt) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c b/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c new file mode 100644 index 00000000000..101e7ea8594 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c @@ -0,0 +1,90 @@ +/* avermedia-m135a-rm-jx.h - Keytable for avermedia_m135a_rm_jx Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Avermedia M135A with IR model RM-JX + * The same codes exist on both Positivo (BR) and original IR + * Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct ir_scancode avermedia_m135a_rm_jx[] = { + { 0x0200, KEY_POWER2 }, + { 0x022e, KEY_DOT }, /* '.' */ + { 0x0201, KEY_MODE }, /* TV/FM or SOURCE */ + + { 0x0205, KEY_1 }, + { 0x0206, KEY_2 }, + { 0x0207, KEY_3 }, + { 0x0209, KEY_4 }, + { 0x020a, KEY_5 }, + { 0x020b, KEY_6 }, + { 0x020d, KEY_7 }, + { 0x020e, KEY_8 }, + { 0x020f, KEY_9 }, + { 0x0211, KEY_0 }, + + { 0x0213, KEY_RIGHT }, /* -> or L */ + { 0x0212, KEY_LEFT }, /* <- or R */ + + { 0x0217, KEY_SLEEP }, /* Capturar Imagem or Snapshot */ + { 0x0210, KEY_SHUFFLE }, /* Amostra or 16 chan prev */ + + { 0x0303, KEY_CHANNELUP }, + { 0x0302, KEY_CHANNELDOWN }, + { 0x021f, KEY_VOLUMEUP }, + { 0x021e, KEY_VOLUMEDOWN }, + { 0x020c, KEY_ENTER }, /* Full Screen */ + + { 0x0214, KEY_MUTE }, + { 0x0208, KEY_AUDIO }, + + { 0x0203, KEY_TEXT }, /* Teletext */ + { 0x0204, KEY_EPG }, + { 0x022b, KEY_TV2 }, /* TV2 or PIP */ + + { 0x021d, KEY_RED }, + { 0x021c, KEY_YELLOW }, + { 0x0301, KEY_GREEN }, + { 0x0300, KEY_BLUE }, + + { 0x021a, KEY_PLAYPAUSE }, + { 0x0219, KEY_RECORD }, + { 0x0218, KEY_PLAY }, + { 0x021b, KEY_STOP }, +}; + +static struct rc_keymap avermedia_m135a_rm_jx_map = { + .map = { + .scan = avermedia_m135a_rm_jx, + .size = ARRAY_SIZE(avermedia_m135a_rm_jx), + .ir_type = IR_TYPE_NEC, + .name = RC_MAP_AVERMEDIA_M135A_RM_JX, + } +}; + +static int __init init_rc_map_avermedia_m135a_rm_jx(void) +{ + return ir_register_map(&avermedia_m135a_rm_jx_map); +} + +static void __exit exit_rc_map_avermedia_m135a_rm_jx(void) +{ + ir_unregister_map(&avermedia_m135a_rm_jx_map); +} + +module_init(init_rc_map_avermedia_m135a_rm_jx) +module_exit(exit_rc_map_avermedia_m135a_rm_jx) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-avermedia.c b/drivers/media/IR/keymaps/rc-avermedia.c new file mode 100644 index 00000000000..21effd5bfb0 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-avermedia.c @@ -0,0 +1,86 @@ +/* avermedia.h - Keytable for avermedia Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Alex Hermann <gaaf@gmx.net> */ + +static struct ir_scancode avermedia[] = { + { 0x28, KEY_1 }, + { 0x18, KEY_2 }, + { 0x38, KEY_3 }, + { 0x24, KEY_4 }, + { 0x14, KEY_5 }, + { 0x34, KEY_6 }, + { 0x2c, KEY_7 }, + { 0x1c, KEY_8 }, + { 0x3c, KEY_9 }, + { 0x22, KEY_0 }, + + { 0x20, KEY_TV }, /* TV/FM */ + { 0x10, KEY_CD }, /* CD */ + { 0x30, KEY_TEXT }, /* TELETEXT */ + { 0x00, KEY_POWER }, /* POWER */ + + { 0x08, KEY_VIDEO }, /* VIDEO */ + { 0x04, KEY_AUDIO }, /* AUDIO */ + { 0x0c, KEY_ZOOM }, /* FULL SCREEN */ + + { 0x12, KEY_SUBTITLE }, /* DISPLAY */ + { 0x32, KEY_REWIND }, /* LOOP */ + { 0x02, KEY_PRINT }, /* PREVIEW */ + + { 0x2a, KEY_SEARCH }, /* AUTOSCAN */ + { 0x1a, KEY_SLEEP }, /* FREEZE */ + { 0x3a, KEY_CAMERA }, /* SNAPSHOT */ + { 0x0a, KEY_MUTE }, /* MUTE */ + + { 0x26, KEY_RECORD }, /* RECORD */ + { 0x16, KEY_PAUSE }, /* PAUSE */ + { 0x36, KEY_STOP }, /* STOP */ + { 0x06, KEY_PLAY }, /* PLAY */ + + { 0x2e, KEY_RED }, /* RED */ + { 0x21, KEY_GREEN }, /* GREEN */ + { 0x0e, KEY_YELLOW }, /* YELLOW */ + { 0x01, KEY_BLUE }, /* BLUE */ + + { 0x1e, KEY_VOLUMEDOWN }, /* VOLUME- */ + { 0x3e, KEY_VOLUMEUP }, /* VOLUME+ */ + { 0x11, KEY_CHANNELDOWN }, /* CHANNEL/PAGE- */ + { 0x31, KEY_CHANNELUP } /* CHANNEL/PAGE+ */ +}; + +static struct rc_keymap avermedia_map = { + .map = { + .scan = avermedia, + .size = ARRAY_SIZE(avermedia), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA, + } +}; + +static int __init init_rc_map_avermedia(void) +{ + return ir_register_map(&avermedia_map); +} + +static void __exit exit_rc_map_avermedia(void) +{ + ir_unregister_map(&avermedia_map); +} + +module_init(init_rc_map_avermedia) +module_exit(exit_rc_map_avermedia) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-avertv-303.c b/drivers/media/IR/keymaps/rc-avertv-303.c new file mode 100644 index 00000000000..971c59d6f9d --- /dev/null +++ b/drivers/media/IR/keymaps/rc-avertv-303.c @@ -0,0 +1,85 @@ +/* avertv-303.h - Keytable for avertv_303 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* AVERTV STUDIO 303 Remote */ + +static struct ir_scancode avertv_303[] = { + { 0x2a, KEY_1 }, + { 0x32, KEY_2 }, + { 0x3a, KEY_3 }, + { 0x4a, KEY_4 }, + { 0x52, KEY_5 }, + { 0x5a, KEY_6 }, + { 0x6a, KEY_7 }, + { 0x72, KEY_8 }, + { 0x7a, KEY_9 }, + { 0x0e, KEY_0 }, + + { 0x02, KEY_POWER }, + { 0x22, KEY_VIDEO }, + { 0x42, KEY_AUDIO }, + { 0x62, KEY_ZOOM }, + { 0x0a, KEY_TV }, + { 0x12, KEY_CD }, + { 0x1a, KEY_TEXT }, + + { 0x16, KEY_SUBTITLE }, + { 0x1e, KEY_REWIND }, + { 0x06, KEY_PRINT }, + + { 0x2e, KEY_SEARCH }, + { 0x36, KEY_SLEEP }, + { 0x3e, KEY_SHUFFLE }, + { 0x26, KEY_MUTE }, + + { 0x4e, KEY_RECORD }, + { 0x56, KEY_PAUSE }, + { 0x5e, KEY_STOP }, + { 0x46, KEY_PLAY }, + + { 0x6e, KEY_RED }, + { 0x0b, KEY_GREEN }, + { 0x66, KEY_YELLOW }, + { 0x03, KEY_BLUE }, + + { 0x76, KEY_LEFT }, + { 0x7e, KEY_RIGHT }, + { 0x13, KEY_DOWN }, + { 0x1b, KEY_UP }, +}; + +static struct rc_keymap avertv_303_map = { + .map = { + .scan = avertv_303, + .size = ARRAY_SIZE(avertv_303), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERTV_303, + } +}; + +static int __init init_rc_map_avertv_303(void) +{ + return ir_register_map(&avertv_303_map); +} + +static void __exit exit_rc_map_avertv_303(void) +{ + ir_unregister_map(&avertv_303_map); +} + +module_init(init_rc_map_avertv_303) +module_exit(exit_rc_map_avertv_303) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-behold-columbus.c b/drivers/media/IR/keymaps/rc-behold-columbus.c new file mode 100644 index 00000000000..9f56c98fef5 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-behold-columbus.c @@ -0,0 +1,108 @@ +/* behold-columbus.h - Keytable for behold_columbus Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Beholder Intl. Ltd. 2008 + * Dmitry Belimov d.belimov@google.com + * Keytable is used by BeholdTV Columbus + * The "ascii-art picture" below (in comments, first row + * is the keycode in hex, and subsequent row(s) shows + * the button labels (several variants when appropriate) + * helps to descide which keycodes to assign to the buttons. + */ + +static struct ir_scancode behold_columbus[] = { + + /* 0x13 0x11 0x1C 0x12 * + * Mute Source TV/FM Power * + * */ + + { 0x13, KEY_MUTE }, + { 0x11, KEY_PROPS }, + { 0x1C, KEY_TUNER }, /* KEY_TV/KEY_RADIO */ + { 0x12, KEY_POWER }, + + /* 0x01 0x02 0x03 0x0D * + * 1 2 3 Stereo * + * * + * 0x04 0x05 0x06 0x19 * + * 4 5 6 Snapshot * + * * + * 0x07 0x08 0x09 0x10 * + * 7 8 9 Zoom * + * */ + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x0D, KEY_SETUP }, /* Setup key */ + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x19, KEY_CAMERA }, /* Snapshot key */ + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x10, KEY_ZOOM }, + + /* 0x0A 0x00 0x0B 0x0C * + * RECALL 0 ChannelUp VolumeUp * + * */ + { 0x0A, KEY_AGAIN }, + { 0x00, KEY_0 }, + { 0x0B, KEY_CHANNELUP }, + { 0x0C, KEY_VOLUMEUP }, + + /* 0x1B 0x1D 0x15 0x18 * + * Timeshift Record ChannelDown VolumeDown * + * */ + + { 0x1B, KEY_TIME }, + { 0x1D, KEY_RECORD }, + { 0x15, KEY_CHANNELDOWN }, + { 0x18, KEY_VOLUMEDOWN }, + + /* 0x0E 0x1E 0x0F 0x1A * + * Stop Pause Previouse Next * + * */ + + { 0x0E, KEY_STOP }, + { 0x1E, KEY_PAUSE }, + { 0x0F, KEY_PREVIOUS }, + { 0x1A, KEY_NEXT }, + +}; + +static struct rc_keymap behold_columbus_map = { + .map = { + .scan = behold_columbus, + .size = ARRAY_SIZE(behold_columbus), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_BEHOLD_COLUMBUS, + } +}; + +static int __init init_rc_map_behold_columbus(void) +{ + return ir_register_map(&behold_columbus_map); +} + +static void __exit exit_rc_map_behold_columbus(void) +{ + ir_unregister_map(&behold_columbus_map); +} + +module_init(init_rc_map_behold_columbus) +module_exit(exit_rc_map_behold_columbus) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-behold.c b/drivers/media/IR/keymaps/rc-behold.c new file mode 100644 index 00000000000..abc140b2098 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-behold.c @@ -0,0 +1,141 @@ +/* behold.h - Keytable for behold Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Igor Kuznetsov <igk72@ya.ru> + * Andrey J. Melnikov <temnota@kmv.ru> + * + * Keytable is used by BeholdTV 60x series, M6 series at + * least, and probably other cards too. + * The "ascii-art picture" below (in comments, first row + * is the keycode in hex, and subsequent row(s) shows + * the button labels (several variants when appropriate) + * helps to descide which keycodes to assign to the buttons. + */ + +static struct ir_scancode behold[] = { + + /* 0x1c 0x12 * + * TV/FM POWER * + * */ + { 0x1c, KEY_TUNER }, /* XXX KEY_TV / KEY_RADIO */ + { 0x12, KEY_POWER }, + + /* 0x01 0x02 0x03 * + * 1 2 3 * + * * + * 0x04 0x05 0x06 * + * 4 5 6 * + * * + * 0x07 0x08 0x09 * + * 7 8 9 * + * */ + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + /* 0x0a 0x00 0x17 * + * RECALL 0 MODE * + * */ + { 0x0a, KEY_AGAIN }, + { 0x00, KEY_0 }, + { 0x17, KEY_MODE }, + + /* 0x14 0x10 * + * ASPECT FULLSCREEN * + * */ + { 0x14, KEY_SCREEN }, + { 0x10, KEY_ZOOM }, + + /* 0x0b * + * Up * + * * + * 0x18 0x16 0x0c * + * Left Ok Right * + * * + * 0x015 * + * Down * + * */ + { 0x0b, KEY_CHANNELUP }, + { 0x18, KEY_VOLUMEDOWN }, + { 0x16, KEY_OK }, /* XXX KEY_ENTER */ + { 0x0c, KEY_VOLUMEUP }, + { 0x15, KEY_CHANNELDOWN }, + + /* 0x11 0x0d * + * MUTE INFO * + * */ + { 0x11, KEY_MUTE }, + { 0x0d, KEY_INFO }, + + /* 0x0f 0x1b 0x1a * + * RECORD PLAY/PAUSE STOP * + * * + * 0x0e 0x1f 0x1e * + *TELETEXT AUDIO SOURCE * + * RED YELLOW * + * */ + { 0x0f, KEY_RECORD }, + { 0x1b, KEY_PLAYPAUSE }, + { 0x1a, KEY_STOP }, + { 0x0e, KEY_TEXT }, + { 0x1f, KEY_RED }, /*XXX KEY_AUDIO */ + { 0x1e, KEY_YELLOW }, /*XXX KEY_SOURCE */ + + /* 0x1d 0x13 0x19 * + * SLEEP PREVIEW DVB * + * GREEN BLUE * + * */ + { 0x1d, KEY_SLEEP }, + { 0x13, KEY_GREEN }, + { 0x19, KEY_BLUE }, /* XXX KEY_SAT */ + + /* 0x58 0x5c * + * FREEZE SNAPSHOT * + * */ + { 0x58, KEY_SLOW }, + { 0x5c, KEY_CAMERA }, + +}; + +static struct rc_keymap behold_map = { + .map = { + .scan = behold, + .size = ARRAY_SIZE(behold), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_BEHOLD, + } +}; + +static int __init init_rc_map_behold(void) +{ + return ir_register_map(&behold_map); +} + +static void __exit exit_rc_map_behold(void) +{ + ir_unregister_map(&behold_map); +} + +module_init(init_rc_map_behold) +module_exit(exit_rc_map_behold) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-budget-ci-old.c b/drivers/media/IR/keymaps/rc-budget-ci-old.c new file mode 100644 index 00000000000..64c2ac91333 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-budget-ci-old.c @@ -0,0 +1,92 @@ +/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* From reading the following remotes: + * Zenith Universal 7 / TV Mode 807 / VCR Mode 837 + * Hauppauge (from NOVA-CI-s box product) + * This is a "middle of the road" approach, differences are noted + */ + +static struct ir_scancode budget_ci_old[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0a, KEY_ENTER }, + { 0x0b, KEY_RED }, + { 0x0c, KEY_POWER }, /* RADIO on Hauppauge */ + { 0x0d, KEY_MUTE }, + { 0x0f, KEY_A }, /* TV on Hauppauge */ + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x14, KEY_B }, + { 0x1c, KEY_UP }, + { 0x1d, KEY_DOWN }, + { 0x1e, KEY_OPTION }, /* RESERVED on Hauppauge */ + { 0x1f, KEY_BREAK }, + { 0x20, KEY_CHANNELUP }, + { 0x21, KEY_CHANNELDOWN }, + { 0x22, KEY_PREVIOUS }, /* Prev Ch on Zenith, SOURCE on Hauppauge */ + { 0x24, KEY_RESTART }, + { 0x25, KEY_OK }, + { 0x26, KEY_CYCLEWINDOWS }, /* MINIMIZE on Hauppauge */ + { 0x28, KEY_ENTER }, /* VCR mode on Zenith */ + { 0x29, KEY_PAUSE }, + { 0x2b, KEY_RIGHT }, + { 0x2c, KEY_LEFT }, + { 0x2e, KEY_MENU }, /* FULL SCREEN on Hauppauge */ + { 0x30, KEY_SLOW }, + { 0x31, KEY_PREVIOUS }, /* VCR mode on Zenith */ + { 0x32, KEY_REWIND }, + { 0x34, KEY_FASTFORWARD }, + { 0x35, KEY_PLAY }, + { 0x36, KEY_STOP }, + { 0x37, KEY_RECORD }, + { 0x38, KEY_TUNER }, /* TV/VCR on Zenith */ + { 0x3a, KEY_C }, + { 0x3c, KEY_EXIT }, + { 0x3d, KEY_POWER2 }, + { 0x3e, KEY_TUNER }, +}; + +static struct rc_keymap budget_ci_old_map = { + .map = { + .scan = budget_ci_old, + .size = ARRAY_SIZE(budget_ci_old), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_BUDGET_CI_OLD, + } +}; + +static int __init init_rc_map_budget_ci_old(void) +{ + return ir_register_map(&budget_ci_old_map); +} + +static void __exit exit_rc_map_budget_ci_old(void) +{ + ir_unregister_map(&budget_ci_old_map); +} + +module_init(init_rc_map_budget_ci_old) +module_exit(exit_rc_map_budget_ci_old) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-cinergy-1400.c b/drivers/media/IR/keymaps/rc-cinergy-1400.c new file mode 100644 index 00000000000..074f2c2c2c6 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-cinergy-1400.c @@ -0,0 +1,84 @@ +/* cinergy-1400.h - Keytable for cinergy_1400 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Cinergy 1400 DVB-T */ + +static struct ir_scancode cinergy_1400[] = { + { 0x01, KEY_POWER }, + { 0x02, KEY_1 }, + { 0x03, KEY_2 }, + { 0x04, KEY_3 }, + { 0x05, KEY_4 }, + { 0x06, KEY_5 }, + { 0x07, KEY_6 }, + { 0x08, KEY_7 }, + { 0x09, KEY_8 }, + { 0x0a, KEY_9 }, + { 0x0c, KEY_0 }, + + { 0x0b, KEY_VIDEO }, + { 0x0d, KEY_REFRESH }, + { 0x0e, KEY_SELECT }, + { 0x0f, KEY_EPG }, + { 0x10, KEY_UP }, + { 0x11, KEY_LEFT }, + { 0x12, KEY_OK }, + { 0x13, KEY_RIGHT }, + { 0x14, KEY_DOWN }, + { 0x15, KEY_TEXT }, + { 0x16, KEY_INFO }, + + { 0x17, KEY_RED }, + { 0x18, KEY_GREEN }, + { 0x19, KEY_YELLOW }, + { 0x1a, KEY_BLUE }, + + { 0x1b, KEY_CHANNELUP }, + { 0x1c, KEY_VOLUMEUP }, + { 0x1d, KEY_MUTE }, + { 0x1e, KEY_VOLUMEDOWN }, + { 0x1f, KEY_CHANNELDOWN }, + + { 0x40, KEY_PAUSE }, + { 0x4c, KEY_PLAY }, + { 0x58, KEY_RECORD }, + { 0x54, KEY_PREVIOUS }, + { 0x48, KEY_STOP }, + { 0x5c, KEY_NEXT }, +}; + +static struct rc_keymap cinergy_1400_map = { + .map = { + .scan = cinergy_1400, + .size = ARRAY_SIZE(cinergy_1400), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_CINERGY_1400, + } +}; + +static int __init init_rc_map_cinergy_1400(void) +{ + return ir_register_map(&cinergy_1400_map); +} + +static void __exit exit_rc_map_cinergy_1400(void) +{ + ir_unregister_map(&cinergy_1400_map); +} + +module_init(init_rc_map_cinergy_1400) +module_exit(exit_rc_map_cinergy_1400) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-cinergy.c b/drivers/media/IR/keymaps/rc-cinergy.c new file mode 100644 index 00000000000..cf84c3dba74 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-cinergy.c @@ -0,0 +1,78 @@ +/* cinergy.h - Keytable for cinergy Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode cinergy[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0a, KEY_POWER }, + { 0x0b, KEY_PROG1 }, /* app */ + { 0x0c, KEY_ZOOM }, /* zoom/fullscreen */ + { 0x0d, KEY_CHANNELUP }, /* channel */ + { 0x0e, KEY_CHANNELDOWN }, /* channel- */ + { 0x0f, KEY_VOLUMEUP }, + { 0x10, KEY_VOLUMEDOWN }, + { 0x11, KEY_TUNER }, /* AV */ + { 0x12, KEY_NUMLOCK }, /* -/-- */ + { 0x13, KEY_AUDIO }, /* audio */ + { 0x14, KEY_MUTE }, + { 0x15, KEY_UP }, + { 0x16, KEY_DOWN }, + { 0x17, KEY_LEFT }, + { 0x18, KEY_RIGHT }, + { 0x19, BTN_LEFT, }, + { 0x1a, BTN_RIGHT, }, + { 0x1b, KEY_WWW }, /* text */ + { 0x1c, KEY_REWIND }, + { 0x1d, KEY_FORWARD }, + { 0x1e, KEY_RECORD }, + { 0x1f, KEY_PLAY }, + { 0x20, KEY_PREVIOUSSONG }, + { 0x21, KEY_NEXTSONG }, + { 0x22, KEY_PAUSE }, + { 0x23, KEY_STOP }, +}; + +static struct rc_keymap cinergy_map = { + .map = { + .scan = cinergy, + .size = ARRAY_SIZE(cinergy), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_CINERGY, + } +}; + +static int __init init_rc_map_cinergy(void) +{ + return ir_register_map(&cinergy_map); +} + +static void __exit exit_rc_map_cinergy(void) +{ + ir_unregister_map(&cinergy_map); +} + +module_init(init_rc_map_cinergy) +module_exit(exit_rc_map_cinergy) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-dm1105-nec.c b/drivers/media/IR/keymaps/rc-dm1105-nec.c new file mode 100644 index 00000000000..90684d0efea --- /dev/null +++ b/drivers/media/IR/keymaps/rc-dm1105-nec.c @@ -0,0 +1,76 @@ +/* dm1105-nec.h - Keytable for dm1105_nec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DVBWorld remotes + Igor M. Liplianin <liplianin@me.by> + */ + +static struct ir_scancode dm1105_nec[] = { + { 0x0a, KEY_POWER2}, /* power */ + { 0x0c, KEY_MUTE}, /* mute */ + { 0x11, KEY_1}, + { 0x12, KEY_2}, + { 0x13, KEY_3}, + { 0x14, KEY_4}, + { 0x15, KEY_5}, + { 0x16, KEY_6}, + { 0x17, KEY_7}, + { 0x18, KEY_8}, + { 0x19, KEY_9}, + { 0x10, KEY_0}, + { 0x1c, KEY_CHANNELUP}, /* ch+ */ + { 0x0f, KEY_CHANNELDOWN}, /* ch- */ + { 0x1a, KEY_VOLUMEUP}, /* vol+ */ + { 0x0e, KEY_VOLUMEDOWN}, /* vol- */ + { 0x04, KEY_RECORD}, /* rec */ + { 0x09, KEY_CHANNEL}, /* fav */ + { 0x08, KEY_BACKSPACE}, /* rewind */ + { 0x07, KEY_FASTFORWARD}, /* fast */ + { 0x0b, KEY_PAUSE}, /* pause */ + { 0x02, KEY_ESC}, /* cancel */ + { 0x03, KEY_TAB}, /* tab */ + { 0x00, KEY_UP}, /* up */ + { 0x1f, KEY_ENTER}, /* ok */ + { 0x01, KEY_DOWN}, /* down */ + { 0x05, KEY_RECORD}, /* cap */ + { 0x06, KEY_STOP}, /* stop */ + { 0x40, KEY_ZOOM}, /* full */ + { 0x1e, KEY_TV}, /* tvmode */ + { 0x1b, KEY_B}, /* recall */ +}; + +static struct rc_keymap dm1105_nec_map = { + .map = { + .scan = dm1105_nec, + .size = ARRAY_SIZE(dm1105_nec), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_DM1105_NEC, + } +}; + +static int __init init_rc_map_dm1105_nec(void) +{ + return ir_register_map(&dm1105_nec_map); +} + +static void __exit exit_rc_map_dm1105_nec(void) +{ + ir_unregister_map(&dm1105_nec_map); +} + +module_init(init_rc_map_dm1105_nec) +module_exit(exit_rc_map_dm1105_nec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c new file mode 100644 index 00000000000..8a4027af964 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c @@ -0,0 +1,78 @@ +/* dntv-live-dvb-t.h - Keytable for dntv_live_dvb_t Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DigitalNow DNTV Live DVB-T Remote */ + +static struct ir_scancode dntv_live_dvb_t[] = { + { 0x00, KEY_ESC }, /* 'go up a level?' */ + /* Keys 0 to 9 */ + { 0x0a, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0b, KEY_TUNER }, /* tv/fm */ + { 0x0c, KEY_SEARCH }, /* scan */ + { 0x0d, KEY_STOP }, + { 0x0e, KEY_PAUSE }, + { 0x0f, KEY_LIST }, /* source */ + + { 0x10, KEY_MUTE }, + { 0x11, KEY_REWIND }, /* backward << */ + { 0x12, KEY_POWER }, + { 0x13, KEY_CAMERA }, /* snap */ + { 0x14, KEY_AUDIO }, /* stereo */ + { 0x15, KEY_CLEAR }, /* reset */ + { 0x16, KEY_PLAY }, + { 0x17, KEY_ENTER }, + { 0x18, KEY_ZOOM }, /* full screen */ + { 0x19, KEY_FASTFORWARD }, /* forward >> */ + { 0x1a, KEY_CHANNELUP }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1c, KEY_INFO }, /* preview */ + { 0x1d, KEY_RECORD }, /* record */ + { 0x1e, KEY_CHANNELDOWN }, + { 0x1f, KEY_VOLUMEDOWN }, +}; + +static struct rc_keymap dntv_live_dvb_t_map = { + .map = { + .scan = dntv_live_dvb_t, + .size = ARRAY_SIZE(dntv_live_dvb_t), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_DNTV_LIVE_DVB_T, + } +}; + +static int __init init_rc_map_dntv_live_dvb_t(void) +{ + return ir_register_map(&dntv_live_dvb_t_map); +} + +static void __exit exit_rc_map_dntv_live_dvb_t(void) +{ + ir_unregister_map(&dntv_live_dvb_t_map); +} + +module_init(init_rc_map_dntv_live_dvb_t) +module_exit(exit_rc_map_dntv_live_dvb_t) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c new file mode 100644 index 00000000000..6f4d60764d5 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c @@ -0,0 +1,97 @@ +/* dntv-live-dvbt-pro.h - Keytable for dntv_live_dvbt_pro Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DigitalNow DNTV Live! DVB-T Pro Remote */ + +static struct ir_scancode dntv_live_dvbt_pro[] = { + { 0x16, KEY_POWER }, + { 0x5b, KEY_HOME }, + + { 0x55, KEY_TV }, /* live tv */ + { 0x58, KEY_TUNER }, /* digital Radio */ + { 0x5a, KEY_RADIO }, /* FM radio */ + { 0x59, KEY_DVD }, /* dvd menu */ + { 0x03, KEY_1 }, + { 0x01, KEY_2 }, + { 0x06, KEY_3 }, + { 0x09, KEY_4 }, + { 0x1d, KEY_5 }, + { 0x1f, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x19, KEY_8 }, + { 0x1b, KEY_9 }, + { 0x0c, KEY_CANCEL }, + { 0x15, KEY_0 }, + { 0x4a, KEY_CLEAR }, + { 0x13, KEY_BACK }, + { 0x00, KEY_TAB }, + { 0x4b, KEY_UP }, + { 0x4e, KEY_LEFT }, + { 0x4f, KEY_OK }, + { 0x52, KEY_RIGHT }, + { 0x51, KEY_DOWN }, + { 0x1e, KEY_VOLUMEUP }, + { 0x0a, KEY_VOLUMEDOWN }, + { 0x02, KEY_CHANNELDOWN }, + { 0x05, KEY_CHANNELUP }, + { 0x11, KEY_RECORD }, + { 0x14, KEY_PLAY }, + { 0x4c, KEY_PAUSE }, + { 0x1a, KEY_STOP }, + { 0x40, KEY_REWIND }, + { 0x12, KEY_FASTFORWARD }, + { 0x41, KEY_PREVIOUSSONG }, /* replay |< */ + { 0x42, KEY_NEXTSONG }, /* skip >| */ + { 0x54, KEY_CAMERA }, /* capture */ + { 0x50, KEY_LANGUAGE }, /* sap */ + { 0x47, KEY_TV2 }, /* pip */ + { 0x4d, KEY_SCREEN }, + { 0x43, KEY_SUBTITLE }, + { 0x10, KEY_MUTE }, + { 0x49, KEY_AUDIO }, /* l/r */ + { 0x07, KEY_SLEEP }, + { 0x08, KEY_VIDEO }, /* a/v */ + { 0x0e, KEY_PREVIOUS }, /* recall */ + { 0x45, KEY_ZOOM }, /* zoom + */ + { 0x46, KEY_ANGLE }, /* zoom - */ + { 0x56, KEY_RED }, + { 0x57, KEY_GREEN }, + { 0x5c, KEY_YELLOW }, + { 0x5d, KEY_BLUE }, +}; + +static struct rc_keymap dntv_live_dvbt_pro_map = { + .map = { + .scan = dntv_live_dvbt_pro, + .size = ARRAY_SIZE(dntv_live_dvbt_pro), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_DNTV_LIVE_DVBT_PRO, + } +}; + +static int __init init_rc_map_dntv_live_dvbt_pro(void) +{ + return ir_register_map(&dntv_live_dvbt_pro_map); +} + +static void __exit exit_rc_map_dntv_live_dvbt_pro(void) +{ + ir_unregister_map(&dntv_live_dvbt_pro_map); +} + +module_init(init_rc_map_dntv_live_dvbt_pro) +module_exit(exit_rc_map_dntv_live_dvbt_pro) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-em-terratec.c b/drivers/media/IR/keymaps/rc-em-terratec.c new file mode 100644 index 00000000000..3130c9c29e6 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-em-terratec.c @@ -0,0 +1,69 @@ +/* em-terratec.h - Keytable for em_terratec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode em_terratec[] = { + { 0x01, KEY_CHANNEL }, + { 0x02, KEY_SELECT }, + { 0x03, KEY_MUTE }, + { 0x04, KEY_POWER }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x08, KEY_CHANNELUP }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0c, KEY_CHANNELDOWN }, + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_0 }, + { 0x12, KEY_MENU }, + { 0x13, KEY_PRINT }, + { 0x14, KEY_VOLUMEDOWN }, + { 0x16, KEY_PAUSE }, + { 0x18, KEY_RECORD }, + { 0x19, KEY_REWIND }, + { 0x1a, KEY_PLAY }, + { 0x1b, KEY_FORWARD }, + { 0x1c, KEY_BACKSPACE }, + { 0x1e, KEY_STOP }, + { 0x40, KEY_ZOOM }, +}; + +static struct rc_keymap em_terratec_map = { + .map = { + .scan = em_terratec, + .size = ARRAY_SIZE(em_terratec), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EM_TERRATEC, + } +}; + +static int __init init_rc_map_em_terratec(void) +{ + return ir_register_map(&em_terratec_map); +} + +static void __exit exit_rc_map_em_terratec(void) +{ + ir_unregister_map(&em_terratec_map); +} + +module_init(init_rc_map_em_terratec) +module_exit(exit_rc_map_em_terratec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-empty.c b/drivers/media/IR/keymaps/rc-empty.c new file mode 100644 index 00000000000..3b338d84b47 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-empty.c @@ -0,0 +1,44 @@ +/* empty.h - Keytable for empty Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* empty keytable, can be used as placeholder for not-yet created keytables */ + +static struct ir_scancode empty[] = { + { 0x2a, KEY_COFFEE }, +}; + +static struct rc_keymap empty_map = { + .map = { + .scan = empty, + .size = ARRAY_SIZE(empty), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EMPTY, + } +}; + +static int __init init_rc_map_empty(void) +{ + return ir_register_map(&empty_map); +} + +static void __exit exit_rc_map_empty(void) +{ + ir_unregister_map(&empty_map); +} + +module_init(init_rc_map_empty) +module_exit(exit_rc_map_empty) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c b/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c new file mode 100644 index 00000000000..4b816967877 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c @@ -0,0 +1,81 @@ +/* encore-enltv-fm53.h - Keytable for encore_enltv_fm53 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Encore ENLTV-FM v5.3 + Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct ir_scancode encore_enltv_fm53[] = { + { 0x10, KEY_POWER2}, + { 0x06, KEY_MUTE}, + + { 0x09, KEY_1}, + { 0x1d, KEY_2}, + { 0x1f, KEY_3}, + { 0x19, KEY_4}, + { 0x1b, KEY_5}, + { 0x11, KEY_6}, + { 0x17, KEY_7}, + { 0x12, KEY_8}, + { 0x16, KEY_9}, + { 0x48, KEY_0}, + + { 0x04, KEY_LIST}, /* -/-- */ + { 0x40, KEY_LAST}, /* recall */ + + { 0x02, KEY_MODE}, /* TV/AV */ + { 0x05, KEY_CAMERA}, /* SNAPSHOT */ + + { 0x4c, KEY_CHANNELUP}, /* UP */ + { 0x00, KEY_CHANNELDOWN}, /* DOWN */ + { 0x0d, KEY_VOLUMEUP}, /* RIGHT */ + { 0x15, KEY_VOLUMEDOWN}, /* LEFT */ + { 0x49, KEY_ENTER}, /* OK */ + + { 0x54, KEY_RECORD}, + { 0x4d, KEY_PLAY}, /* pause */ + + { 0x1e, KEY_MENU}, /* video setting */ + { 0x0e, KEY_RIGHT}, /* <- */ + { 0x1a, KEY_LEFT}, /* -> */ + + { 0x0a, KEY_CLEAR}, /* video default */ + { 0x0c, KEY_ZOOM}, /* hide pannel */ + { 0x47, KEY_SLEEP}, /* shutdown */ +}; + +static struct rc_keymap encore_enltv_fm53_map = { + .map = { + .scan = encore_enltv_fm53, + .size = ARRAY_SIZE(encore_enltv_fm53), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ENCORE_ENLTV_FM53, + } +}; + +static int __init init_rc_map_encore_enltv_fm53(void) +{ + return ir_register_map(&encore_enltv_fm53_map); +} + +static void __exit exit_rc_map_encore_enltv_fm53(void) +{ + ir_unregister_map(&encore_enltv_fm53_map); +} + +module_init(init_rc_map_encore_enltv_fm53) +module_exit(exit_rc_map_encore_enltv_fm53) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-encore-enltv.c b/drivers/media/IR/keymaps/rc-encore-enltv.c new file mode 100644 index 00000000000..9fabffd28cc --- /dev/null +++ b/drivers/media/IR/keymaps/rc-encore-enltv.c @@ -0,0 +1,112 @@ +/* encore-enltv.h - Keytable for encore_enltv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Encore ENLTV-FM - black plastic, white front cover with white glowing buttons + Juan Pablo Sormani <sorman@gmail.com> */ + +static struct ir_scancode encore_enltv[] = { + + /* Power button does nothing, neither in Windows app, + although it sends data (used for BIOS wakeup?) */ + { 0x0d, KEY_MUTE }, + + { 0x1e, KEY_TV }, + { 0x00, KEY_VIDEO }, + { 0x01, KEY_AUDIO }, /* music */ + { 0x02, KEY_MHP }, /* picture */ + + { 0x1f, KEY_1 }, + { 0x03, KEY_2 }, + { 0x04, KEY_3 }, + { 0x05, KEY_4 }, + { 0x1c, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x1d, KEY_9 }, + { 0x0a, KEY_0 }, + + { 0x09, KEY_LIST }, /* -/-- */ + { 0x0b, KEY_LAST }, /* recall */ + + { 0x14, KEY_HOME }, /* win start menu */ + { 0x15, KEY_EXIT }, /* exit */ + { 0x16, KEY_CHANNELUP }, /* UP */ + { 0x12, KEY_CHANNELDOWN }, /* DOWN */ + { 0x0c, KEY_VOLUMEUP }, /* RIGHT */ + { 0x17, KEY_VOLUMEDOWN }, /* LEFT */ + + { 0x18, KEY_ENTER }, /* OK */ + + { 0x0e, KEY_ESC }, + { 0x13, KEY_CYCLEWINDOWS }, /* desktop */ + { 0x11, KEY_TAB }, + { 0x19, KEY_SWITCHVIDEOMODE }, /* switch */ + + { 0x1a, KEY_MENU }, + { 0x1b, KEY_ZOOM }, /* fullscreen */ + { 0x44, KEY_TIME }, /* time shift */ + { 0x40, KEY_MODE }, /* source */ + + { 0x5a, KEY_RECORD }, + { 0x42, KEY_PLAY }, /* play/pause */ + { 0x45, KEY_STOP }, + { 0x43, KEY_CAMERA }, /* camera icon */ + + { 0x48, KEY_REWIND }, + { 0x4a, KEY_FASTFORWARD }, + { 0x49, KEY_PREVIOUS }, + { 0x4b, KEY_NEXT }, + + { 0x4c, KEY_FAVORITES }, /* tv wall */ + { 0x4d, KEY_SOUND }, /* DVD sound */ + { 0x4e, KEY_LANGUAGE }, /* DVD lang */ + { 0x4f, KEY_TEXT }, /* DVD text */ + + { 0x50, KEY_SLEEP }, /* shutdown */ + { 0x51, KEY_MODE }, /* stereo > main */ + { 0x52, KEY_SELECT }, /* stereo > sap */ + { 0x53, KEY_PROG1 }, /* teletext */ + + + { 0x59, KEY_RED }, /* AP1 */ + { 0x41, KEY_GREEN }, /* AP2 */ + { 0x47, KEY_YELLOW }, /* AP3 */ + { 0x57, KEY_BLUE }, /* AP4 */ +}; + +static struct rc_keymap encore_enltv_map = { + .map = { + .scan = encore_enltv, + .size = ARRAY_SIZE(encore_enltv), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ENCORE_ENLTV, + } +}; + +static int __init init_rc_map_encore_enltv(void) +{ + return ir_register_map(&encore_enltv_map); +} + +static void __exit exit_rc_map_encore_enltv(void) +{ + ir_unregister_map(&encore_enltv_map); +} + +module_init(init_rc_map_encore_enltv) +module_exit(exit_rc_map_encore_enltv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-encore-enltv2.c b/drivers/media/IR/keymaps/rc-encore-enltv2.c new file mode 100644 index 00000000000..efefd516661 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-encore-enltv2.c @@ -0,0 +1,90 @@ +/* encore-enltv2.h - Keytable for encore_enltv2 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton + Mauro Carvalho Chehab <mchehab@infradead.org> */ + +static struct ir_scancode encore_enltv2[] = { + { 0x4c, KEY_POWER2 }, + { 0x4a, KEY_TUNER }, + { 0x40, KEY_1 }, + { 0x60, KEY_2 }, + { 0x50, KEY_3 }, + { 0x70, KEY_4 }, + { 0x48, KEY_5 }, + { 0x68, KEY_6 }, + { 0x58, KEY_7 }, + { 0x78, KEY_8 }, + { 0x44, KEY_9 }, + { 0x54, KEY_0 }, + + { 0x64, KEY_LAST }, /* +100 */ + { 0x4e, KEY_AGAIN }, /* Recall */ + + { 0x6c, KEY_SWITCHVIDEOMODE }, /* Video Source */ + { 0x5e, KEY_MENU }, + { 0x56, KEY_SCREEN }, + { 0x7a, KEY_SETUP }, + + { 0x46, KEY_MUTE }, + { 0x5c, KEY_MODE }, /* Stereo */ + { 0x74, KEY_INFO }, + { 0x7c, KEY_CLEAR }, + + { 0x55, KEY_UP }, + { 0x49, KEY_DOWN }, + { 0x7e, KEY_LEFT }, + { 0x59, KEY_RIGHT }, + { 0x6a, KEY_ENTER }, + + { 0x42, KEY_VOLUMEUP }, + { 0x62, KEY_VOLUMEDOWN }, + { 0x52, KEY_CHANNELUP }, + { 0x72, KEY_CHANNELDOWN }, + + { 0x41, KEY_RECORD }, + { 0x51, KEY_CAMERA }, /* Snapshot */ + { 0x75, KEY_TIME }, /* Timeshift */ + { 0x71, KEY_TV2 }, /* PIP */ + + { 0x45, KEY_REWIND }, + { 0x6f, KEY_PAUSE }, + { 0x7d, KEY_FORWARD }, + { 0x79, KEY_STOP }, +}; + +static struct rc_keymap encore_enltv2_map = { + .map = { + .scan = encore_enltv2, + .size = ARRAY_SIZE(encore_enltv2), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ENCORE_ENLTV2, + } +}; + +static int __init init_rc_map_encore_enltv2(void) +{ + return ir_register_map(&encore_enltv2_map); +} + +static void __exit exit_rc_map_encore_enltv2(void) +{ + ir_unregister_map(&encore_enltv2_map); +} + +module_init(init_rc_map_encore_enltv2) +module_exit(exit_rc_map_encore_enltv2) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-evga-indtube.c b/drivers/media/IR/keymaps/rc-evga-indtube.c new file mode 100644 index 00000000000..3f3fb13813b --- /dev/null +++ b/drivers/media/IR/keymaps/rc-evga-indtube.c @@ -0,0 +1,61 @@ +/* evga-indtube.h - Keytable for evga_indtube Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* EVGA inDtube + Devin Heitmueller <devin.heitmueller@gmail.com> + */ + +static struct ir_scancode evga_indtube[] = { + { 0x12, KEY_POWER}, + { 0x02, KEY_MODE}, /* TV */ + { 0x14, KEY_MUTE}, + { 0x1a, KEY_CHANNELUP}, + { 0x16, KEY_TV2}, /* PIP */ + { 0x1d, KEY_VOLUMEUP}, + { 0x05, KEY_CHANNELDOWN}, + { 0x0f, KEY_PLAYPAUSE}, + { 0x19, KEY_VOLUMEDOWN}, + { 0x1c, KEY_REWIND}, + { 0x0d, KEY_RECORD}, + { 0x18, KEY_FORWARD}, + { 0x1e, KEY_PREVIOUS}, + { 0x1b, KEY_STOP}, + { 0x1f, KEY_NEXT}, + { 0x13, KEY_CAMERA}, +}; + +static struct rc_keymap evga_indtube_map = { + .map = { + .scan = evga_indtube, + .size = ARRAY_SIZE(evga_indtube), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EVGA_INDTUBE, + } +}; + +static int __init init_rc_map_evga_indtube(void) +{ + return ir_register_map(&evga_indtube_map); +} + +static void __exit exit_rc_map_evga_indtube(void) +{ + ir_unregister_map(&evga_indtube_map); +} + +module_init(init_rc_map_evga_indtube) +module_exit(exit_rc_map_evga_indtube) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-eztv.c b/drivers/media/IR/keymaps/rc-eztv.c new file mode 100644 index 00000000000..660907a78db --- /dev/null +++ b/drivers/media/IR/keymaps/rc-eztv.c @@ -0,0 +1,96 @@ +/* eztv.h - Keytable for eztv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Alfons Geser <a.geser@cox.net> + * updates from Job D. R. Borges <jobdrb@ig.com.br> */ + +static struct ir_scancode eztv[] = { + { 0x12, KEY_POWER }, + { 0x01, KEY_TV }, /* DVR */ + { 0x15, KEY_DVD }, /* DVD */ + { 0x17, KEY_AUDIO }, /* music */ + /* DVR mode / DVD mode / music mode */ + + { 0x1b, KEY_MUTE }, /* mute */ + { 0x02, KEY_LANGUAGE }, /* MTS/SAP / audio / autoseek */ + { 0x1e, KEY_SUBTITLE }, /* closed captioning / subtitle / seek */ + { 0x16, KEY_ZOOM }, /* full screen */ + { 0x1c, KEY_VIDEO }, /* video source / eject / delall */ + { 0x1d, KEY_RESTART }, /* playback / angle / del */ + { 0x2f, KEY_SEARCH }, /* scan / menu / playlist */ + { 0x30, KEY_CHANNEL }, /* CH surfing / bookmark / memo */ + + { 0x31, KEY_HELP }, /* help */ + { 0x32, KEY_MODE }, /* num/memo */ + { 0x33, KEY_ESC }, /* cancel */ + + { 0x0c, KEY_UP }, /* up */ + { 0x10, KEY_DOWN }, /* down */ + { 0x08, KEY_LEFT }, /* left */ + { 0x04, KEY_RIGHT }, /* right */ + { 0x03, KEY_SELECT }, /* select */ + + { 0x1f, KEY_REWIND }, /* rewind */ + { 0x20, KEY_PLAYPAUSE },/* play/pause */ + { 0x29, KEY_FORWARD }, /* forward */ + { 0x14, KEY_AGAIN }, /* repeat */ + { 0x2b, KEY_RECORD }, /* recording */ + { 0x2c, KEY_STOP }, /* stop */ + { 0x2d, KEY_PLAY }, /* play */ + { 0x2e, KEY_CAMERA }, /* snapshot / shuffle */ + + { 0x00, KEY_0 }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + + { 0x2a, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x18, KEY_CHANNELUP },/* CH.tracking up */ + { 0x19, KEY_CHANNELDOWN },/* CH.tracking down */ + + { 0x13, KEY_ENTER }, /* enter */ + { 0x21, KEY_DOT }, /* . (decimal dot) */ +}; + +static struct rc_keymap eztv_map = { + .map = { + .scan = eztv, + .size = ARRAY_SIZE(eztv), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EZTV, + } +}; + +static int __init init_rc_map_eztv(void) +{ + return ir_register_map(&eztv_map); +} + +static void __exit exit_rc_map_eztv(void) +{ + ir_unregister_map(&eztv_map); +} + +module_init(init_rc_map_eztv) +module_exit(exit_rc_map_eztv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-flydvb.c b/drivers/media/IR/keymaps/rc-flydvb.c new file mode 100644 index 00000000000..a173c81035f --- /dev/null +++ b/drivers/media/IR/keymaps/rc-flydvb.c @@ -0,0 +1,77 @@ +/* flydvb.h - Keytable for flydvb Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode flydvb[] = { + { 0x01, KEY_ZOOM }, /* Full Screen */ + { 0x00, KEY_POWER }, /* Power */ + + { 0x03, KEY_1 }, + { 0x04, KEY_2 }, + { 0x05, KEY_3 }, + { 0x07, KEY_4 }, + { 0x08, KEY_5 }, + { 0x09, KEY_6 }, + { 0x0b, KEY_7 }, + { 0x0c, KEY_8 }, + { 0x0d, KEY_9 }, + { 0x06, KEY_AGAIN }, /* Recall */ + { 0x0f, KEY_0 }, + { 0x10, KEY_MUTE }, /* Mute */ + { 0x02, KEY_RADIO }, /* TV/Radio */ + { 0x1b, KEY_LANGUAGE }, /* SAP (Second Audio Program) */ + + { 0x14, KEY_VOLUMEUP }, /* VOL+ */ + { 0x17, KEY_VOLUMEDOWN }, /* VOL- */ + { 0x12, KEY_CHANNELUP }, /* CH+ */ + { 0x13, KEY_CHANNELDOWN }, /* CH- */ + { 0x1d, KEY_ENTER }, /* Enter */ + + { 0x1a, KEY_MODE }, /* PIP */ + { 0x18, KEY_TUNER }, /* Source */ + + { 0x1e, KEY_RECORD }, /* Record/Pause */ + { 0x15, KEY_ANGLE }, /* Swap (no label on key) */ + { 0x1c, KEY_PAUSE }, /* Timeshift/Pause */ + { 0x19, KEY_BACK }, /* Rewind << */ + { 0x0a, KEY_PLAYPAUSE }, /* Play/Pause */ + { 0x1f, KEY_FORWARD }, /* Forward >> */ + { 0x16, KEY_PREVIOUS }, /* Back |<< */ + { 0x11, KEY_STOP }, /* Stop */ + { 0x0e, KEY_NEXT }, /* End >>| */ +}; + +static struct rc_keymap flydvb_map = { + .map = { + .scan = flydvb, + .size = ARRAY_SIZE(flydvb), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_FLYDVB, + } +}; + +static int __init init_rc_map_flydvb(void) +{ + return ir_register_map(&flydvb_map); +} + +static void __exit exit_rc_map_flydvb(void) +{ + ir_unregister_map(&flydvb_map); +} + +module_init(init_rc_map_flydvb) +module_exit(exit_rc_map_flydvb) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-flyvideo.c b/drivers/media/IR/keymaps/rc-flyvideo.c new file mode 100644 index 00000000000..9c73043cbdb --- /dev/null +++ b/drivers/media/IR/keymaps/rc-flyvideo.c @@ -0,0 +1,70 @@ +/* flyvideo.h - Keytable for flyvideo Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode flyvideo[] = { + { 0x0f, KEY_0 }, + { 0x03, KEY_1 }, + { 0x04, KEY_2 }, + { 0x05, KEY_3 }, + { 0x07, KEY_4 }, + { 0x08, KEY_5 }, + { 0x09, KEY_6 }, + { 0x0b, KEY_7 }, + { 0x0c, KEY_8 }, + { 0x0d, KEY_9 }, + + { 0x0e, KEY_MODE }, /* Air/Cable */ + { 0x11, KEY_VIDEO }, /* Video */ + { 0x15, KEY_AUDIO }, /* Audio */ + { 0x00, KEY_POWER }, /* Power */ + { 0x18, KEY_TUNER }, /* AV Source */ + { 0x02, KEY_ZOOM }, /* Fullscreen */ + { 0x1a, KEY_LANGUAGE }, /* Stereo */ + { 0x1b, KEY_MUTE }, /* Mute */ + { 0x14, KEY_VOLUMEUP }, /* Volume + */ + { 0x17, KEY_VOLUMEDOWN },/* Volume - */ + { 0x12, KEY_CHANNELUP },/* Channel + */ + { 0x13, KEY_CHANNELDOWN },/* Channel - */ + { 0x06, KEY_AGAIN }, /* Recall */ + { 0x10, KEY_ENTER }, /* Enter */ + + { 0x19, KEY_BACK }, /* Rewind ( <<< ) */ + { 0x1f, KEY_FORWARD }, /* Forward ( >>> ) */ + { 0x0a, KEY_ANGLE }, /* no label, may be used as the PAUSE button */ +}; + +static struct rc_keymap flyvideo_map = { + .map = { + .scan = flyvideo, + .size = ARRAY_SIZE(flyvideo), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_FLYVIDEO, + } +}; + +static int __init init_rc_map_flyvideo(void) +{ + return ir_register_map(&flyvideo_map); +} + +static void __exit exit_rc_map_flyvideo(void) +{ + ir_unregister_map(&flyvideo_map); +} + +module_init(init_rc_map_flyvideo) +module_exit(exit_rc_map_flyvideo) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c b/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c new file mode 100644 index 00000000000..cdb10389b10 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c @@ -0,0 +1,98 @@ +/* fusionhdtv-mce.h - Keytable for fusionhdtv_mce Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DViCO FUSION HDTV MCE remote */ + +static struct ir_scancode fusionhdtv_mce[] = { + + { 0x0b, KEY_1 }, + { 0x17, KEY_2 }, + { 0x1b, KEY_3 }, + { 0x07, KEY_4 }, + { 0x50, KEY_5 }, + { 0x54, KEY_6 }, + { 0x48, KEY_7 }, + { 0x4c, KEY_8 }, + { 0x58, KEY_9 }, + { 0x03, KEY_0 }, + + { 0x5e, KEY_OK }, + { 0x51, KEY_UP }, + { 0x53, KEY_DOWN }, + { 0x5b, KEY_LEFT }, + { 0x5f, KEY_RIGHT }, + + { 0x02, KEY_TV }, /* Labeled DTV on remote */ + { 0x0e, KEY_MP3 }, + { 0x1a, KEY_DVD }, + { 0x1e, KEY_FAVORITES }, /* Labeled CPF on remote */ + { 0x16, KEY_SETUP }, + { 0x46, KEY_POWER2 }, /* TV On/Off button on remote */ + { 0x0a, KEY_EPG }, /* Labeled Guide on remote */ + + { 0x49, KEY_BACK }, + { 0x59, KEY_INFO }, /* Labeled MORE on remote */ + { 0x4d, KEY_MENU }, /* Labeled DVDMENU on remote */ + { 0x55, KEY_CYCLEWINDOWS }, /* Labeled ALT-TAB on remote */ + + { 0x0f, KEY_PREVIOUSSONG }, /* Labeled |<< REPLAY on remote */ + { 0x12, KEY_NEXTSONG }, /* Labeled >>| SKIP on remote */ + { 0x42, KEY_ENTER }, /* Labeled START with a green + MS windows logo on remote */ + + { 0x15, KEY_VOLUMEUP }, + { 0x05, KEY_VOLUMEDOWN }, + { 0x11, KEY_CHANNELUP }, + { 0x09, KEY_CHANNELDOWN }, + + { 0x52, KEY_CAMERA }, + { 0x5a, KEY_TUNER }, + { 0x19, KEY_OPEN }, + + { 0x13, KEY_MODE }, /* 4:3 16:9 select */ + { 0x1f, KEY_ZOOM }, + + { 0x43, KEY_REWIND }, + { 0x47, KEY_PLAYPAUSE }, + { 0x4f, KEY_FASTFORWARD }, + { 0x57, KEY_MUTE }, + { 0x0d, KEY_STOP }, + { 0x01, KEY_RECORD }, + { 0x4e, KEY_POWER }, +}; + +static struct rc_keymap fusionhdtv_mce_map = { + .map = { + .scan = fusionhdtv_mce, + .size = ARRAY_SIZE(fusionhdtv_mce), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_FUSIONHDTV_MCE, + } +}; + +static int __init init_rc_map_fusionhdtv_mce(void) +{ + return ir_register_map(&fusionhdtv_mce_map); +} + +static void __exit exit_rc_map_fusionhdtv_mce(void) +{ + ir_unregister_map(&fusionhdtv_mce_map); +} + +module_init(init_rc_map_fusionhdtv_mce) +module_exit(exit_rc_map_fusionhdtv_mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-gadmei-rm008z.c b/drivers/media/IR/keymaps/rc-gadmei-rm008z.c new file mode 100644 index 00000000000..c16c0d1263a --- /dev/null +++ b/drivers/media/IR/keymaps/rc-gadmei-rm008z.c @@ -0,0 +1,81 @@ +/* gadmei-rm008z.h - Keytable for gadmei_rm008z Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* GADMEI UTV330+ RM008Z remote + Shine Liu <shinel@foxmail.com> + */ + +static struct ir_scancode gadmei_rm008z[] = { + { 0x14, KEY_POWER2}, /* POWER OFF */ + { 0x0c, KEY_MUTE}, /* MUTE */ + + { 0x18, KEY_TV}, /* TV */ + { 0x0e, KEY_VIDEO}, /* AV */ + { 0x0b, KEY_AUDIO}, /* SV */ + { 0x0f, KEY_RADIO}, /* FM */ + + { 0x00, KEY_1}, + { 0x01, KEY_2}, + { 0x02, KEY_3}, + { 0x03, KEY_4}, + { 0x04, KEY_5}, + { 0x05, KEY_6}, + { 0x06, KEY_7}, + { 0x07, KEY_8}, + { 0x08, KEY_9}, + { 0x09, KEY_0}, + { 0x0a, KEY_INFO}, /* OSD */ + { 0x1c, KEY_BACKSPACE}, /* LAST */ + + { 0x0d, KEY_PLAY}, /* PLAY */ + { 0x1e, KEY_CAMERA}, /* SNAPSHOT */ + { 0x1a, KEY_RECORD}, /* RECORD */ + { 0x17, KEY_STOP}, /* STOP */ + + { 0x1f, KEY_UP}, /* UP */ + { 0x44, KEY_DOWN}, /* DOWN */ + { 0x46, KEY_TAB}, /* BACK */ + { 0x4a, KEY_ZOOM}, /* FULLSECREEN */ + + { 0x10, KEY_VOLUMEUP}, /* VOLUMEUP */ + { 0x11, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */ + { 0x12, KEY_CHANNELUP}, /* CHANNELUP */ + { 0x13, KEY_CHANNELDOWN}, /* CHANNELDOWN */ + { 0x15, KEY_ENTER}, /* OK */ +}; + +static struct rc_keymap gadmei_rm008z_map = { + .map = { + .scan = gadmei_rm008z, + .size = ARRAY_SIZE(gadmei_rm008z), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_GADMEI_RM008Z, + } +}; + +static int __init init_rc_map_gadmei_rm008z(void) +{ + return ir_register_map(&gadmei_rm008z_map); +} + +static void __exit exit_rc_map_gadmei_rm008z(void) +{ + ir_unregister_map(&gadmei_rm008z_map); +} + +module_init(init_rc_map_gadmei_rm008z) +module_exit(exit_rc_map_gadmei_rm008z) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c new file mode 100644 index 00000000000..89f8e384e52 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c @@ -0,0 +1,84 @@ +/* genius-tvgo-a11mce.h - Keytable for genius_tvgo_a11mce Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Remote control for the Genius TVGO A11MCE + * Adrian Pardini <pardo.bsso@gmail.com> + */ + +static struct ir_scancode genius_tvgo_a11mce[] = { + /* Keys 0 to 9 */ + { 0x48, KEY_0 }, + { 0x09, KEY_1 }, + { 0x1d, KEY_2 }, + { 0x1f, KEY_3 }, + { 0x19, KEY_4 }, + { 0x1b, KEY_5 }, + { 0x11, KEY_6 }, + { 0x17, KEY_7 }, + { 0x12, KEY_8 }, + { 0x16, KEY_9 }, + + { 0x54, KEY_RECORD }, /* recording */ + { 0x06, KEY_MUTE }, /* mute */ + { 0x10, KEY_POWER }, + { 0x40, KEY_LAST }, /* recall */ + { 0x4c, KEY_CHANNELUP }, /* channel / program + */ + { 0x00, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x0d, KEY_VOLUMEUP }, + { 0x15, KEY_VOLUMEDOWN }, + { 0x4d, KEY_OK }, /* also labeled as Pause */ + { 0x1c, KEY_ZOOM }, /* full screen and Stop*/ + { 0x02, KEY_MODE }, /* AV Source or Rewind*/ + { 0x04, KEY_LIST }, /* -/-- */ + /* small arrows above numbers */ + { 0x1a, KEY_NEXT }, /* also Fast Forward */ + { 0x0e, KEY_PREVIOUS }, /* also Rewind */ + /* these are in a rather non standard layout and have + an alternate name written */ + { 0x1e, KEY_UP }, /* Video Setting */ + { 0x0a, KEY_DOWN }, /* Video Default */ + { 0x05, KEY_CAMERA }, /* Snapshot */ + { 0x0c, KEY_RIGHT }, /* Hide Panel */ + /* Four buttons without label */ + { 0x49, KEY_RED }, + { 0x0b, KEY_GREEN }, + { 0x13, KEY_YELLOW }, + { 0x50, KEY_BLUE }, +}; + +static struct rc_keymap genius_tvgo_a11mce_map = { + .map = { + .scan = genius_tvgo_a11mce, + .size = ARRAY_SIZE(genius_tvgo_a11mce), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_GENIUS_TVGO_A11MCE, + } +}; + +static int __init init_rc_map_genius_tvgo_a11mce(void) +{ + return ir_register_map(&genius_tvgo_a11mce_map); +} + +static void __exit exit_rc_map_genius_tvgo_a11mce(void) +{ + ir_unregister_map(&genius_tvgo_a11mce_map); +} + +module_init(init_rc_map_genius_tvgo_a11mce) +module_exit(exit_rc_map_genius_tvgo_a11mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-gotview7135.c b/drivers/media/IR/keymaps/rc-gotview7135.c new file mode 100644 index 00000000000..52f025bb35f --- /dev/null +++ b/drivers/media/IR/keymaps/rc-gotview7135.c @@ -0,0 +1,79 @@ +/* gotview7135.h - Keytable for gotview7135 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Mike Baikov <mike@baikov.com> */ + +static struct ir_scancode gotview7135[] = { + + { 0x11, KEY_POWER }, + { 0x35, KEY_TV }, + { 0x1b, KEY_0 }, + { 0x29, KEY_1 }, + { 0x19, KEY_2 }, + { 0x39, KEY_3 }, + { 0x1f, KEY_4 }, + { 0x2c, KEY_5 }, + { 0x21, KEY_6 }, + { 0x24, KEY_7 }, + { 0x18, KEY_8 }, + { 0x2b, KEY_9 }, + { 0x3b, KEY_AGAIN }, /* LOOP */ + { 0x06, KEY_AUDIO }, + { 0x31, KEY_PRINT }, /* PREVIEW */ + { 0x3e, KEY_VIDEO }, + { 0x10, KEY_CHANNELUP }, + { 0x20, KEY_CHANNELDOWN }, + { 0x0c, KEY_VOLUMEDOWN }, + { 0x28, KEY_VOLUMEUP }, + { 0x08, KEY_MUTE }, + { 0x26, KEY_SEARCH }, /* SCAN */ + { 0x3f, KEY_CAMERA }, /* SNAPSHOT */ + { 0x12, KEY_RECORD }, + { 0x32, KEY_STOP }, + { 0x3c, KEY_PLAY }, + { 0x1d, KEY_REWIND }, + { 0x2d, KEY_PAUSE }, + { 0x0d, KEY_FORWARD }, + { 0x05, KEY_ZOOM }, /*FULL*/ + + { 0x2a, KEY_F21 }, /* LIVE TIMESHIFT */ + { 0x0e, KEY_F22 }, /* MIN TIMESHIFT */ + { 0x1e, KEY_TIME }, /* TIMESHIFT */ + { 0x38, KEY_F24 }, /* NORMAL TIMESHIFT */ +}; + +static struct rc_keymap gotview7135_map = { + .map = { + .scan = gotview7135, + .size = ARRAY_SIZE(gotview7135), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_GOTVIEW7135, + } +}; + +static int __init init_rc_map_gotview7135(void) +{ + return ir_register_map(&gotview7135_map); +} + +static void __exit exit_rc_map_gotview7135(void) +{ + ir_unregister_map(&gotview7135_map); +} + +module_init(init_rc_map_gotview7135) +module_exit(exit_rc_map_gotview7135) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-hauppauge-new.c b/drivers/media/IR/keymaps/rc-hauppauge-new.c new file mode 100644 index 00000000000..c6f8cd7c518 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-hauppauge-new.c @@ -0,0 +1,100 @@ +/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Hauppauge: the newer, gray remotes (seems there are multiple + * slightly different versions), shipped with cx88+ivtv cards. + * almost rc5 coding, but some non-standard keys */ + +static struct ir_scancode hauppauge_new[] = { + /* Keys 0 to 9 */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0a, KEY_TEXT }, /* keypad asterisk as well */ + { 0x0b, KEY_RED }, /* red button */ + { 0x0c, KEY_RADIO }, + { 0x0d, KEY_MENU }, + { 0x0e, KEY_SUBTITLE }, /* also the # key */ + { 0x0f, KEY_MUTE }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x12, KEY_PREVIOUS }, /* previous channel */ + { 0x14, KEY_UP }, + { 0x15, KEY_DOWN }, + { 0x16, KEY_LEFT }, + { 0x17, KEY_RIGHT }, + { 0x18, KEY_VIDEO }, /* Videos */ + { 0x19, KEY_AUDIO }, /* Music */ + /* 0x1a: Pictures - presume this means + "Multimedia Home Platform" - + no "PICTURES" key in input.h + */ + { 0x1a, KEY_MHP }, + + { 0x1b, KEY_EPG }, /* Guide */ + { 0x1c, KEY_TV }, + { 0x1e, KEY_NEXTSONG }, /* skip >| */ + { 0x1f, KEY_EXIT }, /* back/exit */ + { 0x20, KEY_CHANNELUP }, /* channel / program + */ + { 0x21, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x22, KEY_CHANNEL }, /* source (old black remote) */ + { 0x24, KEY_PREVIOUSSONG }, /* replay |< */ + { 0x25, KEY_ENTER }, /* OK */ + { 0x26, KEY_SLEEP }, /* minimize (old black remote) */ + { 0x29, KEY_BLUE }, /* blue key */ + { 0x2e, KEY_GREEN }, /* green button */ + { 0x30, KEY_PAUSE }, /* pause */ + { 0x32, KEY_REWIND }, /* backward << */ + { 0x34, KEY_FASTFORWARD }, /* forward >> */ + { 0x35, KEY_PLAY }, + { 0x36, KEY_STOP }, + { 0x37, KEY_RECORD }, /* recording */ + { 0x38, KEY_YELLOW }, /* yellow key */ + { 0x3b, KEY_SELECT }, /* top right button */ + { 0x3c, KEY_ZOOM }, /* full */ + { 0x3d, KEY_POWER }, /* system power (green button) */ +}; + +static struct rc_keymap hauppauge_new_map = { + .map = { + .scan = hauppauge_new, + .size = ARRAY_SIZE(hauppauge_new), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_HAUPPAUGE_NEW, + } +}; + +static int __init init_rc_map_hauppauge_new(void) +{ + return ir_register_map(&hauppauge_new_map); +} + +static void __exit exit_rc_map_hauppauge_new(void) +{ + ir_unregister_map(&hauppauge_new_map); +} + +module_init(init_rc_map_hauppauge_new) +module_exit(exit_rc_map_hauppauge_new) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-imon-mce.c b/drivers/media/IR/keymaps/rc-imon-mce.c new file mode 100644 index 00000000000..e49f350e3a0 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-imon-mce.c @@ -0,0 +1,142 @@ +/* rc5-imon-mce.c - Keytable for Windows Media Center RC-6 remotes for use + * with the SoundGraph iMON/Antec Veris hardware IR decoder + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* mce-mode imon mce remote key table */ +static struct ir_scancode imon_mce[] = { + /* keys sorted mostly by frequency of use to optimize lookups */ + { 0x800ff415, KEY_REWIND }, + { 0x800ff414, KEY_FASTFORWARD }, + { 0x800ff41b, KEY_PREVIOUS }, + { 0x800ff41a, KEY_NEXT }, + + { 0x800ff416, KEY_PLAY }, + { 0x800ff418, KEY_PAUSE }, + { 0x800ff419, KEY_STOP }, + { 0x800ff417, KEY_RECORD }, + + { 0x02000052, KEY_UP }, + { 0x02000051, KEY_DOWN }, + { 0x02000050, KEY_LEFT }, + { 0x0200004f, KEY_RIGHT }, + + { 0x800ff41e, KEY_UP }, + { 0x800ff41f, KEY_DOWN }, + { 0x800ff420, KEY_LEFT }, + { 0x800ff421, KEY_RIGHT }, + + /* 0x800ff40b also KEY_NUMERIC_POUND on some receivers */ + { 0x800ff40b, KEY_ENTER }, + { 0x02000028, KEY_ENTER }, +/* the OK and Enter buttons decode to the same value on some remotes + { 0x02000028, KEY_OK }, */ + { 0x800ff422, KEY_OK }, + { 0x0200002a, KEY_EXIT }, + { 0x800ff423, KEY_EXIT }, + { 0x02000029, KEY_DELETE }, + /* 0x800ff40a also KEY_NUMERIC_STAR on some receivers */ + { 0x800ff40a, KEY_DELETE }, + + { 0x800ff40e, KEY_MUTE }, + { 0x800ff410, KEY_VOLUMEUP }, + { 0x800ff411, KEY_VOLUMEDOWN }, + { 0x800ff412, KEY_CHANNELUP }, + { 0x800ff413, KEY_CHANNELDOWN }, + + { 0x0200001e, KEY_NUMERIC_1 }, + { 0x0200001f, KEY_NUMERIC_2 }, + { 0x02000020, KEY_NUMERIC_3 }, + { 0x02000021, KEY_NUMERIC_4 }, + { 0x02000022, KEY_NUMERIC_5 }, + { 0x02000023, KEY_NUMERIC_6 }, + { 0x02000024, KEY_NUMERIC_7 }, + { 0x02000025, KEY_NUMERIC_8 }, + { 0x02000026, KEY_NUMERIC_9 }, + { 0x02000027, KEY_NUMERIC_0 }, + + { 0x800ff401, KEY_NUMERIC_1 }, + { 0x800ff402, KEY_NUMERIC_2 }, + { 0x800ff403, KEY_NUMERIC_3 }, + { 0x800ff404, KEY_NUMERIC_4 }, + { 0x800ff405, KEY_NUMERIC_5 }, + { 0x800ff406, KEY_NUMERIC_6 }, + { 0x800ff407, KEY_NUMERIC_7 }, + { 0x800ff408, KEY_NUMERIC_8 }, + { 0x800ff409, KEY_NUMERIC_9 }, + { 0x800ff400, KEY_NUMERIC_0 }, + + { 0x02200025, KEY_NUMERIC_STAR }, + { 0x02200020, KEY_NUMERIC_POUND }, + /* 0x800ff41d also KEY_BLUE on some receivers */ + { 0x800ff41d, KEY_NUMERIC_STAR }, + /* 0x800ff41c also KEY_PREVIOUS on some receivers */ + { 0x800ff41c, KEY_NUMERIC_POUND }, + + { 0x800ff446, KEY_TV }, + { 0x800ff447, KEY_AUDIO }, /* My Music */ + { 0x800ff448, KEY_PVR }, /* RecordedTV */ + { 0x800ff449, KEY_CAMERA }, + { 0x800ff44a, KEY_VIDEO }, + /* 0x800ff424 also KEY_MENU on some receivers */ + { 0x800ff424, KEY_DVD }, + /* 0x800ff425 also KEY_GREEN on some receivers */ + { 0x800ff425, KEY_TUNER }, /* LiveTV */ + { 0x800ff450, KEY_RADIO }, + + { 0x800ff44c, KEY_LANGUAGE }, + { 0x800ff427, KEY_ZOOM }, /* Aspect */ + + { 0x800ff45b, KEY_RED }, + { 0x800ff45c, KEY_GREEN }, + { 0x800ff45d, KEY_YELLOW }, + { 0x800ff45e, KEY_BLUE }, + + { 0x800ff466, KEY_RED }, + /* { 0x800ff425, KEY_GREEN }, */ + { 0x800ff468, KEY_YELLOW }, + /* { 0x800ff41d, KEY_BLUE }, */ + + { 0x800ff40f, KEY_INFO }, + { 0x800ff426, KEY_EPG }, /* Guide */ + { 0x800ff45a, KEY_SUBTITLE }, /* Caption/Teletext */ + { 0x800ff44d, KEY_TITLE }, + + { 0x800ff40c, KEY_POWER }, + { 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */ + +}; + +static struct rc_keymap imon_mce_map = { + .map = { + .scan = imon_mce, + .size = ARRAY_SIZE(imon_mce), + /* its RC6, but w/a hardware decoder */ + .ir_type = IR_TYPE_RC6, + .name = RC_MAP_IMON_MCE, + } +}; + +static int __init init_rc_map_imon_mce(void) +{ + return ir_register_map(&imon_mce_map); +} + +static void __exit exit_rc_map_imon_mce(void) +{ + ir_unregister_map(&imon_mce_map); +} + +module_init(init_rc_map_imon_mce) +module_exit(exit_rc_map_imon_mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-imon-pad.c b/drivers/media/IR/keymaps/rc-imon-pad.c new file mode 100644 index 00000000000..bc4db72f02e --- /dev/null +++ b/drivers/media/IR/keymaps/rc-imon-pad.c @@ -0,0 +1,156 @@ +/* rc5-imon-pad.c - Keytable for SoundGraph iMON PAD and Antec Veris + * RM-200 Remote Control + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * standard imon remote key table, which isn't really entirely + * "standard", as different receivers decode the same key on the + * same remote to different hex codes, and the silkscreened names + * vary a bit between the SoundGraph and Antec remotes... ugh. + */ +static struct ir_scancode imon_pad[] = { + /* keys sorted mostly by frequency of use to optimize lookups */ + { 0x2a8195b7, KEY_REWIND }, + { 0x298315b7, KEY_REWIND }, + { 0x2b8115b7, KEY_FASTFORWARD }, + { 0x2b8315b7, KEY_FASTFORWARD }, + { 0x2b9115b7, KEY_PREVIOUS }, + { 0x298195b7, KEY_NEXT }, + + { 0x2a8115b7, KEY_PLAY }, + { 0x2a8315b7, KEY_PLAY }, + { 0x2a9115b7, KEY_PAUSE }, + { 0x2b9715b7, KEY_STOP }, + { 0x298115b7, KEY_RECORD }, + + { 0x01008000, KEY_UP }, + { 0x01007f00, KEY_DOWN }, + { 0x01000080, KEY_LEFT }, + { 0x0100007f, KEY_RIGHT }, + + { 0x2aa515b7, KEY_UP }, + { 0x289515b7, KEY_DOWN }, + { 0x29a515b7, KEY_LEFT }, + { 0x2ba515b7, KEY_RIGHT }, + + { 0x0200002c, KEY_SPACE }, /* Select/Space */ + { 0x2a9315b7, KEY_SPACE }, /* Select/Space */ + { 0x02000028, KEY_ENTER }, + { 0x28a195b7, KEY_ENTER }, + { 0x288195b7, KEY_EXIT }, + { 0x02000029, KEY_ESC }, + { 0x2bb715b7, KEY_ESC }, + { 0x0200002a, KEY_BACKSPACE }, + { 0x28a115b7, KEY_BACKSPACE }, + + { 0x2b9595b7, KEY_MUTE }, + { 0x28a395b7, KEY_VOLUMEUP }, + { 0x28a595b7, KEY_VOLUMEDOWN }, + { 0x289395b7, KEY_CHANNELUP }, + { 0x288795b7, KEY_CHANNELDOWN }, + + { 0x0200001e, KEY_NUMERIC_1 }, + { 0x0200001f, KEY_NUMERIC_2 }, + { 0x02000020, KEY_NUMERIC_3 }, + { 0x02000021, KEY_NUMERIC_4 }, + { 0x02000022, KEY_NUMERIC_5 }, + { 0x02000023, KEY_NUMERIC_6 }, + { 0x02000024, KEY_NUMERIC_7 }, + { 0x02000025, KEY_NUMERIC_8 }, + { 0x02000026, KEY_NUMERIC_9 }, + { 0x02000027, KEY_NUMERIC_0 }, + + { 0x28b595b7, KEY_NUMERIC_1 }, + { 0x2bb195b7, KEY_NUMERIC_2 }, + { 0x28b195b7, KEY_NUMERIC_3 }, + { 0x2a8595b7, KEY_NUMERIC_4 }, + { 0x299595b7, KEY_NUMERIC_5 }, + { 0x2aa595b7, KEY_NUMERIC_6 }, + { 0x2b9395b7, KEY_NUMERIC_7 }, + { 0x2a8515b7, KEY_NUMERIC_8 }, + { 0x2aa115b7, KEY_NUMERIC_9 }, + { 0x2ba595b7, KEY_NUMERIC_0 }, + + { 0x02200025, KEY_NUMERIC_STAR }, + { 0x28b515b7, KEY_NUMERIC_STAR }, + { 0x02200020, KEY_NUMERIC_POUND }, + { 0x29a115b7, KEY_NUMERIC_POUND }, + + { 0x2b8515b7, KEY_VIDEO }, + { 0x299195b7, KEY_AUDIO }, + { 0x2ba115b7, KEY_CAMERA }, + { 0x28a515b7, KEY_TV }, + { 0x29a395b7, KEY_DVD }, + { 0x29a295b7, KEY_DVD }, + + /* the Menu key between DVD and Subtitle on the RM-200... */ + { 0x2ba385b7, KEY_MENU }, + { 0x2ba395b7, KEY_MENU }, + + { 0x288515b7, KEY_BOOKMARKS }, + { 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */ + { 0x298595b7, KEY_SUBTITLE }, + { 0x2b8595b7, KEY_LANGUAGE }, + + { 0x29a595b7, KEY_ZOOM }, + { 0x2aa395b7, KEY_SCREEN }, /* FullScreen */ + + { 0x299115b7, KEY_KEYBOARD }, + { 0x299135b7, KEY_KEYBOARD }, + + { 0x01010000, BTN_LEFT }, + { 0x01020000, BTN_RIGHT }, + { 0x01010080, BTN_LEFT }, + { 0x01020080, BTN_RIGHT }, + { 0x688301b7, BTN_LEFT }, + { 0x688481b7, BTN_RIGHT }, + + { 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */ + { 0x2b8395b7, KEY_TIME }, /* Timer */ + + { 0x289115b7, KEY_POWER }, + { 0x29b195b7, KEY_EJECTCD }, /* the one next to play */ + { 0x299395b7, KEY_EJECTCLOSECD }, /* eject (by TaskSw) */ + + { 0x02800000, KEY_CONTEXT_MENU }, /* Left Menu */ + { 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/ + { 0x02000065, KEY_COMPOSE }, /* RightMenu */ + { 0x28b715b7, KEY_COMPOSE }, /* RightMenu */ + { 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */ + { 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */ +}; + +static struct rc_keymap imon_pad_map = { + .map = { + .scan = imon_pad, + .size = ARRAY_SIZE(imon_pad), + /* actual protocol details unknown, hardware decoder */ + .ir_type = IR_TYPE_OTHER, + .name = RC_MAP_IMON_PAD, + } +}; + +static int __init init_rc_map_imon_pad(void) +{ + return ir_register_map(&imon_pad_map); +} + +static void __exit exit_rc_map_imon_pad(void) +{ + ir_unregister_map(&imon_pad_map); +} + +module_init(init_rc_map_imon_pad) +module_exit(exit_rc_map_imon_pad) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-iodata-bctv7e.c b/drivers/media/IR/keymaps/rc-iodata-bctv7e.c new file mode 100644 index 00000000000..ef6600259fc --- /dev/null +++ b/drivers/media/IR/keymaps/rc-iodata-bctv7e.c @@ -0,0 +1,88 @@ +/* iodata-bctv7e.h - Keytable for iodata_bctv7e Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* IO-DATA BCTV7E Remote */ + +static struct ir_scancode iodata_bctv7e[] = { + { 0x40, KEY_TV }, + { 0x20, KEY_RADIO }, /* FM */ + { 0x60, KEY_EPG }, + { 0x00, KEY_POWER }, + + /* Keys 0 to 9 */ + { 0x44, KEY_0 }, /* 10 */ + { 0x50, KEY_1 }, + { 0x30, KEY_2 }, + { 0x70, KEY_3 }, + { 0x48, KEY_4 }, + { 0x28, KEY_5 }, + { 0x68, KEY_6 }, + { 0x58, KEY_7 }, + { 0x38, KEY_8 }, + { 0x78, KEY_9 }, + + { 0x10, KEY_L }, /* Live */ + { 0x08, KEY_TIME }, /* Time Shift */ + + { 0x18, KEY_PLAYPAUSE }, /* Play */ + + { 0x24, KEY_ENTER }, /* 11 */ + { 0x64, KEY_ESC }, /* 12 */ + { 0x04, KEY_M }, /* Multi */ + + { 0x54, KEY_VIDEO }, + { 0x34, KEY_CHANNELUP }, + { 0x74, KEY_VOLUMEUP }, + { 0x14, KEY_MUTE }, + + { 0x4c, KEY_VCR }, /* SVIDEO */ + { 0x2c, KEY_CHANNELDOWN }, + { 0x6c, KEY_VOLUMEDOWN }, + { 0x0c, KEY_ZOOM }, + + { 0x5c, KEY_PAUSE }, + { 0x3c, KEY_RED }, /* || (red) */ + { 0x7c, KEY_RECORD }, /* recording */ + { 0x1c, KEY_STOP }, + + { 0x41, KEY_REWIND }, /* backward << */ + { 0x21, KEY_PLAY }, + { 0x61, KEY_FASTFORWARD }, /* forward >> */ + { 0x01, KEY_NEXT }, /* skip >| */ +}; + +static struct rc_keymap iodata_bctv7e_map = { + .map = { + .scan = iodata_bctv7e, + .size = ARRAY_SIZE(iodata_bctv7e), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_IODATA_BCTV7E, + } +}; + +static int __init init_rc_map_iodata_bctv7e(void) +{ + return ir_register_map(&iodata_bctv7e_map); +} + +static void __exit exit_rc_map_iodata_bctv7e(void) +{ + ir_unregister_map(&iodata_bctv7e_map); +} + +module_init(init_rc_map_iodata_bctv7e) +module_exit(exit_rc_map_iodata_bctv7e) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-kaiomy.c b/drivers/media/IR/keymaps/rc-kaiomy.c new file mode 100644 index 00000000000..4c7883ba0f1 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-kaiomy.c @@ -0,0 +1,87 @@ +/* kaiomy.h - Keytable for kaiomy Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Kaiomy TVnPC U2 + Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct ir_scancode kaiomy[] = { + { 0x43, KEY_POWER2}, + { 0x01, KEY_LIST}, + { 0x0b, KEY_ZOOM}, + { 0x03, KEY_POWER}, + + { 0x04, KEY_1}, + { 0x08, KEY_2}, + { 0x02, KEY_3}, + + { 0x0f, KEY_4}, + { 0x05, KEY_5}, + { 0x06, KEY_6}, + + { 0x0c, KEY_7}, + { 0x0d, KEY_8}, + { 0x0a, KEY_9}, + + { 0x11, KEY_0}, + + { 0x09, KEY_CHANNELUP}, + { 0x07, KEY_CHANNELDOWN}, + + { 0x0e, KEY_VOLUMEUP}, + { 0x13, KEY_VOLUMEDOWN}, + + { 0x10, KEY_HOME}, + { 0x12, KEY_ENTER}, + + { 0x14, KEY_RECORD}, + { 0x15, KEY_STOP}, + { 0x16, KEY_PLAY}, + { 0x17, KEY_MUTE}, + + { 0x18, KEY_UP}, + { 0x19, KEY_DOWN}, + { 0x1a, KEY_LEFT}, + { 0x1b, KEY_RIGHT}, + + { 0x1c, KEY_RED}, + { 0x1d, KEY_GREEN}, + { 0x1e, KEY_YELLOW}, + { 0x1f, KEY_BLUE}, +}; + +static struct rc_keymap kaiomy_map = { + .map = { + .scan = kaiomy, + .size = ARRAY_SIZE(kaiomy), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_KAIOMY, + } +}; + +static int __init init_rc_map_kaiomy(void) +{ + return ir_register_map(&kaiomy_map); +} + +static void __exit exit_rc_map_kaiomy(void) +{ + ir_unregister_map(&kaiomy_map); +} + +module_init(init_rc_map_kaiomy) +module_exit(exit_rc_map_kaiomy) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-kworld-315u.c b/drivers/media/IR/keymaps/rc-kworld-315u.c new file mode 100644 index 00000000000..618c817374e --- /dev/null +++ b/drivers/media/IR/keymaps/rc-kworld-315u.c @@ -0,0 +1,83 @@ +/* kworld-315u.h - Keytable for kworld_315u Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Kworld 315U + */ + +static struct ir_scancode kworld_315u[] = { + { 0x6143, KEY_POWER }, + { 0x6101, KEY_TUNER }, /* source */ + { 0x610b, KEY_ZOOM }, + { 0x6103, KEY_POWER2 }, /* shutdown */ + + { 0x6104, KEY_1 }, + { 0x6108, KEY_2 }, + { 0x6102, KEY_3 }, + { 0x6109, KEY_CHANNELUP }, + + { 0x610f, KEY_4 }, + { 0x6105, KEY_5 }, + { 0x6106, KEY_6 }, + { 0x6107, KEY_CHANNELDOWN }, + + { 0x610c, KEY_7 }, + { 0x610d, KEY_8 }, + { 0x610a, KEY_9 }, + { 0x610e, KEY_VOLUMEUP }, + + { 0x6110, KEY_LAST }, + { 0x6111, KEY_0 }, + { 0x6112, KEY_ENTER }, + { 0x6113, KEY_VOLUMEDOWN }, + + { 0x6114, KEY_RECORD }, + { 0x6115, KEY_STOP }, + { 0x6116, KEY_PLAY }, + { 0x6117, KEY_MUTE }, + + { 0x6118, KEY_UP }, + { 0x6119, KEY_DOWN }, + { 0x611a, KEY_LEFT }, + { 0x611b, KEY_RIGHT }, + + { 0x611c, KEY_RED }, + { 0x611d, KEY_GREEN }, + { 0x611e, KEY_YELLOW }, + { 0x611f, KEY_BLUE }, +}; + +static struct rc_keymap kworld_315u_map = { + .map = { + .scan = kworld_315u, + .size = ARRAY_SIZE(kworld_315u), + .ir_type = IR_TYPE_NEC, + .name = RC_MAP_KWORLD_315U, + } +}; + +static int __init init_rc_map_kworld_315u(void) +{ + return ir_register_map(&kworld_315u_map); +} + +static void __exit exit_rc_map_kworld_315u(void) +{ + ir_unregister_map(&kworld_315u_map); +} + +module_init(init_rc_map_kworld_315u) +module_exit(exit_rc_map_kworld_315u) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c new file mode 100644 index 00000000000..366732f1f7b --- /dev/null +++ b/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c @@ -0,0 +1,99 @@ +/* kworld-plus-tv-analog.h - Keytable for kworld_plus_tv_analog Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Kworld Plus TV Analog Lite PCI IR + Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct ir_scancode kworld_plus_tv_analog[] = { + { 0x0c, KEY_PROG1 }, /* Kworld key */ + { 0x16, KEY_CLOSECD }, /* -> ) */ + { 0x1d, KEY_POWER2 }, + + { 0x00, KEY_1 }, + { 0x01, KEY_2 }, + { 0x02, KEY_3 }, /* Two keys have the same code: 3 and left */ + { 0x03, KEY_4 }, /* Two keys have the same code: 3 and right */ + { 0x04, KEY_5 }, + { 0x05, KEY_6 }, + { 0x06, KEY_7 }, + { 0x07, KEY_8 }, + { 0x08, KEY_9 }, + { 0x0a, KEY_0 }, + + { 0x09, KEY_AGAIN }, + { 0x14, KEY_MUTE }, + + { 0x20, KEY_UP }, + { 0x21, KEY_DOWN }, + { 0x0b, KEY_ENTER }, + + { 0x10, KEY_CHANNELUP }, + { 0x11, KEY_CHANNELDOWN }, + + /* Couldn't map key left/key right since those + conflict with '3' and '4' scancodes + I dunno what the original driver does + */ + + { 0x13, KEY_VOLUMEUP }, + { 0x12, KEY_VOLUMEDOWN }, + + /* The lower part of the IR + There are several duplicated keycodes there. + Most of them conflict with digits. + Add mappings just to the unused scancodes. + Somehow, the original driver has a way to know, + but this doesn't seem to be on some GPIO. + Also, it is not related to the time between keyup + and keydown. + */ + { 0x19, KEY_TIME}, /* Timeshift */ + { 0x1a, KEY_STOP}, + { 0x1b, KEY_RECORD}, + + { 0x22, KEY_TEXT}, + + { 0x15, KEY_AUDIO}, /* ((*)) */ + { 0x0f, KEY_ZOOM}, + { 0x1c, KEY_CAMERA}, /* snapshot */ + + { 0x18, KEY_RED}, /* B */ + { 0x23, KEY_GREEN}, /* C */ +}; + +static struct rc_keymap kworld_plus_tv_analog_map = { + .map = { + .scan = kworld_plus_tv_analog, + .size = ARRAY_SIZE(kworld_plus_tv_analog), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_KWORLD_PLUS_TV_ANALOG, + } +}; + +static int __init init_rc_map_kworld_plus_tv_analog(void) +{ + return ir_register_map(&kworld_plus_tv_analog_map); +} + +static void __exit exit_rc_map_kworld_plus_tv_analog(void) +{ + ir_unregister_map(&kworld_plus_tv_analog_map); +} + +module_init(init_rc_map_kworld_plus_tv_analog) +module_exit(exit_rc_map_kworld_plus_tv_analog) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c new file mode 100644 index 00000000000..1e9fbfa90a1 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-manli.c @@ -0,0 +1,135 @@ +/* manli.h - Keytable for manli Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Michael Tokarev <mjt@tls.msk.ru> + http://www.corpit.ru/mjt/beholdTV/remote_control.jpg + keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at + least, and probably other cards too. + The "ascii-art picture" below (in comments, first row + is the keycode in hex, and subsequent row(s) shows + the button labels (several variants when appropriate) + helps to descide which keycodes to assign to the buttons. + */ + +static struct ir_scancode manli[] = { + + /* 0x1c 0x12 * + * FUNCTION POWER * + * FM (|) * + * */ + { 0x1c, KEY_RADIO }, /*XXX*/ + { 0x12, KEY_POWER }, + + /* 0x01 0x02 0x03 * + * 1 2 3 * + * * + * 0x04 0x05 0x06 * + * 4 5 6 * + * * + * 0x07 0x08 0x09 * + * 7 8 9 * + * */ + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + /* 0x0a 0x00 0x17 * + * RECALL 0 +100 * + * PLUS * + * */ + { 0x0a, KEY_AGAIN }, /*XXX KEY_REWIND? */ + { 0x00, KEY_0 }, + { 0x17, KEY_DIGITS }, /*XXX*/ + + /* 0x14 0x10 * + * MENU INFO * + * OSD */ + { 0x14, KEY_MENU }, + { 0x10, KEY_INFO }, + + /* 0x0b * + * Up * + * * + * 0x18 0x16 0x0c * + * Left Ok Right * + * * + * 0x015 * + * Down * + * */ + { 0x0b, KEY_UP }, + { 0x18, KEY_LEFT }, + { 0x16, KEY_OK }, /*XXX KEY_SELECT? KEY_ENTER? */ + { 0x0c, KEY_RIGHT }, + { 0x15, KEY_DOWN }, + + /* 0x11 0x0d * + * TV/AV MODE * + * SOURCE STEREO * + * */ + { 0x11, KEY_TV }, /*XXX*/ + { 0x0d, KEY_MODE }, /*XXX there's no KEY_STEREO */ + + /* 0x0f 0x1b 0x1a * + * AUDIO Vol+ Chan+ * + * TIMESHIFT??? * + * * + * 0x0e 0x1f 0x1e * + * SLEEP Vol- Chan- * + * */ + { 0x0f, KEY_AUDIO }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1a, KEY_CHANNELUP }, + { 0x0e, KEY_TIME }, + { 0x1f, KEY_VOLUMEDOWN }, + { 0x1e, KEY_CHANNELDOWN }, + + /* 0x13 0x19 * + * MUTE SNAPSHOT* + * */ + { 0x13, KEY_MUTE }, + { 0x19, KEY_CAMERA }, + + /* 0x1d unused ? */ +}; + +static struct rc_keymap manli_map = { + .map = { + .scan = manli, + .size = ARRAY_SIZE(manli), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_MANLI, + } +}; + +static int __init init_rc_map_manli(void) +{ + return ir_register_map(&manli_map); +} + +static void __exit exit_rc_map_manli(void) +{ + ir_unregister_map(&manli_map); +} + +module_init(init_rc_map_manli) +module_exit(exit_rc_map_manli) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c new file mode 100644 index 00000000000..eb8e42c18ff --- /dev/null +++ b/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c @@ -0,0 +1,123 @@ +/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card + is marked "KS003". The controller is I2C at address 0x30, but does not seem + to respond to probes until a read is performed from a valid device. + I don't know why... + + Note: This remote may be of similar or identical design to the + Pixelview remote (?). The raw codes and duplicate button codes + appear to be the same. + + Henry Wong <henry@stuffedcow.net> + Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com> +*/ + +static struct ir_scancode msi_tvanywhere_plus[] = { + +/* ---- Remote Button Layout ---- + + POWER SOURCE SCAN MUTE + TV/FM 1 2 3 + |> 4 5 6 + <| 7 8 9 + ^^UP 0 + RECALL + vvDN RECORD STOP PLAY + + MINIMIZE ZOOM + + CH+ + VOL- VOL+ + CH- + + SNAPSHOT MTS + + << FUNC >> RESET +*/ + + { 0x01, KEY_1 }, /* 1 */ + { 0x0b, KEY_2 }, /* 2 */ + { 0x1b, KEY_3 }, /* 3 */ + { 0x05, KEY_4 }, /* 4 */ + { 0x09, KEY_5 }, /* 5 */ + { 0x15, KEY_6 }, /* 6 */ + { 0x06, KEY_7 }, /* 7 */ + { 0x0a, KEY_8 }, /* 8 */ + { 0x12, KEY_9 }, /* 9 */ + { 0x02, KEY_0 }, /* 0 */ + { 0x10, KEY_KPPLUS }, /* + */ + { 0x13, KEY_AGAIN }, /* Recall */ + + { 0x1e, KEY_POWER }, /* Power */ + { 0x07, KEY_TUNER }, /* Source */ + { 0x1c, KEY_SEARCH }, /* Scan */ + { 0x18, KEY_MUTE }, /* Mute */ + + { 0x03, KEY_RADIO }, /* TV/FM */ + /* The next four keys are duplicates that appear to send the + same IR code as Ch+, Ch-, >>, and << . The raw code assigned + to them is the actual code + 0x20 - they will never be + detected as such unless some way is discovered to distinguish + these buttons from those that have the same code. */ + { 0x3f, KEY_RIGHT }, /* |> and Ch+ */ + { 0x37, KEY_LEFT }, /* <| and Ch- */ + { 0x2c, KEY_UP }, /* ^^Up and >> */ + { 0x24, KEY_DOWN }, /* vvDn and << */ + + { 0x00, KEY_RECORD }, /* Record */ + { 0x08, KEY_STOP }, /* Stop */ + { 0x11, KEY_PLAY }, /* Play */ + + { 0x0f, KEY_CLOSE }, /* Minimize */ + { 0x19, KEY_ZOOM }, /* Zoom */ + { 0x1a, KEY_CAMERA }, /* Snapshot */ + { 0x0d, KEY_LANGUAGE }, /* MTS */ + + { 0x14, KEY_VOLUMEDOWN }, /* Vol- */ + { 0x16, KEY_VOLUMEUP }, /* Vol+ */ + { 0x17, KEY_CHANNELDOWN }, /* Ch- */ + { 0x1f, KEY_CHANNELUP }, /* Ch+ */ + + { 0x04, KEY_REWIND }, /* << */ + { 0x0e, KEY_MENU }, /* Function */ + { 0x0c, KEY_FASTFORWARD }, /* >> */ + { 0x1d, KEY_RESTART }, /* Reset */ +}; + +static struct rc_keymap msi_tvanywhere_plus_map = { + .map = { + .scan = msi_tvanywhere_plus, + .size = ARRAY_SIZE(msi_tvanywhere_plus), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_MSI_TVANYWHERE_PLUS, + } +}; + +static int __init init_rc_map_msi_tvanywhere_plus(void) +{ + return ir_register_map(&msi_tvanywhere_plus_map); +} + +static void __exit exit_rc_map_msi_tvanywhere_plus(void) +{ + ir_unregister_map(&msi_tvanywhere_plus_map); +} + +module_init(init_rc_map_msi_tvanywhere_plus) +module_exit(exit_rc_map_msi_tvanywhere_plus) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-msi-tvanywhere.c b/drivers/media/IR/keymaps/rc-msi-tvanywhere.c new file mode 100644 index 00000000000..ef411854f06 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-msi-tvanywhere.c @@ -0,0 +1,69 @@ +/* msi-tvanywhere.h - Keytable for msi_tvanywhere Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* MSI TV@nywhere MASTER remote */ + +static struct ir_scancode msi_tvanywhere[] = { + /* Keys 0 to 9 */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0c, KEY_MUTE }, + { 0x0f, KEY_SCREEN }, /* Full Screen */ + { 0x10, KEY_FN }, /* Funtion */ + { 0x11, KEY_TIME }, /* Time shift */ + { 0x12, KEY_POWER }, + { 0x13, KEY_MEDIA }, /* MTS */ + { 0x14, KEY_SLOW }, + { 0x16, KEY_REWIND }, /* backward << */ + { 0x17, KEY_ENTER }, /* Return */ + { 0x18, KEY_FASTFORWARD }, /* forward >> */ + { 0x1a, KEY_CHANNELUP }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1e, KEY_CHANNELDOWN }, + { 0x1f, KEY_VOLUMEDOWN }, +}; + +static struct rc_keymap msi_tvanywhere_map = { + .map = { + .scan = msi_tvanywhere, + .size = ARRAY_SIZE(msi_tvanywhere), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_MSI_TVANYWHERE, + } +}; + +static int __init init_rc_map_msi_tvanywhere(void) +{ + return ir_register_map(&msi_tvanywhere_map); +} + +static void __exit exit_rc_map_msi_tvanywhere(void) +{ + ir_unregister_map(&msi_tvanywhere_map); +} + +module_init(init_rc_map_msi_tvanywhere) +module_exit(exit_rc_map_msi_tvanywhere) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-nebula.c b/drivers/media/IR/keymaps/rc-nebula.c new file mode 100644 index 00000000000..ccc50eb402e --- /dev/null +++ b/drivers/media/IR/keymaps/rc-nebula.c @@ -0,0 +1,96 @@ +/* nebula.h - Keytable for nebula Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode nebula[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0a, KEY_TV }, + { 0x0b, KEY_AUX }, + { 0x0c, KEY_DVD }, + { 0x0d, KEY_POWER }, + { 0x0e, KEY_MHP }, /* labelled 'Picture' */ + { 0x0f, KEY_AUDIO }, + { 0x10, KEY_INFO }, + { 0x11, KEY_F13 }, /* 16:9 */ + { 0x12, KEY_F14 }, /* 14:9 */ + { 0x13, KEY_EPG }, + { 0x14, KEY_EXIT }, + { 0x15, KEY_MENU }, + { 0x16, KEY_UP }, + { 0x17, KEY_DOWN }, + { 0x18, KEY_LEFT }, + { 0x19, KEY_RIGHT }, + { 0x1a, KEY_ENTER }, + { 0x1b, KEY_CHANNELUP }, + { 0x1c, KEY_CHANNELDOWN }, + { 0x1d, KEY_VOLUMEUP }, + { 0x1e, KEY_VOLUMEDOWN }, + { 0x1f, KEY_RED }, + { 0x20, KEY_GREEN }, + { 0x21, KEY_YELLOW }, + { 0x22, KEY_BLUE }, + { 0x23, KEY_SUBTITLE }, + { 0x24, KEY_F15 }, /* AD */ + { 0x25, KEY_TEXT }, + { 0x26, KEY_MUTE }, + { 0x27, KEY_REWIND }, + { 0x28, KEY_STOP }, + { 0x29, KEY_PLAY }, + { 0x2a, KEY_FASTFORWARD }, + { 0x2b, KEY_F16 }, /* chapter */ + { 0x2c, KEY_PAUSE }, + { 0x2d, KEY_PLAY }, + { 0x2e, KEY_RECORD }, + { 0x2f, KEY_F17 }, /* picture in picture */ + { 0x30, KEY_KPPLUS }, /* zoom in */ + { 0x31, KEY_KPMINUS }, /* zoom out */ + { 0x32, KEY_F18 }, /* capture */ + { 0x33, KEY_F19 }, /* web */ + { 0x34, KEY_EMAIL }, + { 0x35, KEY_PHONE }, + { 0x36, KEY_PC }, +}; + +static struct rc_keymap nebula_map = { + .map = { + .scan = nebula, + .size = ARRAY_SIZE(nebula), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_NEBULA, + } +}; + +static int __init init_rc_map_nebula(void) +{ + return ir_register_map(&nebula_map); +} + +static void __exit exit_rc_map_nebula(void) +{ + ir_unregister_map(&nebula_map); +} + +module_init(init_rc_map_nebula) +module_exit(exit_rc_map_nebula) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c new file mode 100644 index 00000000000..e1b54d20db6 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c @@ -0,0 +1,105 @@ +/* nec-terratec-cinergy-xs.h - Keytable for nec_terratec_cinergy_xs Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Terratec Cinergy Hybrid T USB XS FM + Mauro Carvalho Chehab <mchehab@redhat.com> + */ + +static struct ir_scancode nec_terratec_cinergy_xs[] = { + { 0x1441, KEY_HOME}, + { 0x1401, KEY_POWER2}, + + { 0x1442, KEY_MENU}, /* DVD menu */ + { 0x1443, KEY_SUBTITLE}, + { 0x1444, KEY_TEXT}, /* Teletext */ + { 0x1445, KEY_DELETE}, + + { 0x1402, KEY_1}, + { 0x1403, KEY_2}, + { 0x1404, KEY_3}, + { 0x1405, KEY_4}, + { 0x1406, KEY_5}, + { 0x1407, KEY_6}, + { 0x1408, KEY_7}, + { 0x1409, KEY_8}, + { 0x140a, KEY_9}, + { 0x140c, KEY_0}, + + { 0x140b, KEY_TUNER}, /* AV */ + { 0x140d, KEY_MODE}, /* A.B */ + + { 0x1446, KEY_TV}, + { 0x1447, KEY_DVD}, + { 0x1449, KEY_VIDEO}, + { 0x144a, KEY_RADIO}, /* Music */ + { 0x144b, KEY_CAMERA}, /* PIC */ + + { 0x1410, KEY_UP}, + { 0x1411, KEY_LEFT}, + { 0x1412, KEY_OK}, + { 0x1413, KEY_RIGHT}, + { 0x1414, KEY_DOWN}, + + { 0x140f, KEY_EPG}, + { 0x1416, KEY_INFO}, + { 0x144d, KEY_BACKSPACE}, + + { 0x141c, KEY_VOLUMEUP}, + { 0x141e, KEY_VOLUMEDOWN}, + + { 0x144c, KEY_PLAY}, + { 0x141d, KEY_MUTE}, + + { 0x141b, KEY_CHANNELUP}, + { 0x141f, KEY_CHANNELDOWN}, + + { 0x1417, KEY_RED}, + { 0x1418, KEY_GREEN}, + { 0x1419, KEY_YELLOW}, + { 0x141a, KEY_BLUE}, + + { 0x1458, KEY_RECORD}, + { 0x1448, KEY_STOP}, + { 0x1440, KEY_PAUSE}, + + { 0x1454, KEY_LAST}, + { 0x144e, KEY_REWIND}, + { 0x144f, KEY_FASTFORWARD}, + { 0x145c, KEY_NEXT}, +}; + +static struct rc_keymap nec_terratec_cinergy_xs_map = { + .map = { + .scan = nec_terratec_cinergy_xs, + .size = ARRAY_SIZE(nec_terratec_cinergy_xs), + .ir_type = IR_TYPE_NEC, + .name = RC_MAP_NEC_TERRATEC_CINERGY_XS, + } +}; + +static int __init init_rc_map_nec_terratec_cinergy_xs(void) +{ + return ir_register_map(&nec_terratec_cinergy_xs_map); +} + +static void __exit exit_rc_map_nec_terratec_cinergy_xs(void) +{ + ir_unregister_map(&nec_terratec_cinergy_xs_map); +} + +module_init(init_rc_map_nec_terratec_cinergy_xs) +module_exit(exit_rc_map_nec_terratec_cinergy_xs) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-norwood.c b/drivers/media/IR/keymaps/rc-norwood.c new file mode 100644 index 00000000000..e5849a6b3f0 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-norwood.c @@ -0,0 +1,85 @@ +/* norwood.h - Keytable for norwood Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Norwood Micro (non-Pro) TV Tuner + By Peter Naulls <peter@chocky.org> + Key comments are the functions given in the manual */ + +static struct ir_scancode norwood[] = { + /* Keys 0 to 9 */ + { 0x20, KEY_0 }, + { 0x21, KEY_1 }, + { 0x22, KEY_2 }, + { 0x23, KEY_3 }, + { 0x24, KEY_4 }, + { 0x25, KEY_5 }, + { 0x26, KEY_6 }, + { 0x27, KEY_7 }, + { 0x28, KEY_8 }, + { 0x29, KEY_9 }, + + { 0x78, KEY_TUNER }, /* Video Source */ + { 0x2c, KEY_EXIT }, /* Open/Close software */ + { 0x2a, KEY_SELECT }, /* 2 Digit Select */ + { 0x69, KEY_AGAIN }, /* Recall */ + + { 0x32, KEY_BRIGHTNESSUP }, /* Brightness increase */ + { 0x33, KEY_BRIGHTNESSDOWN }, /* Brightness decrease */ + { 0x6b, KEY_KPPLUS }, /* (not named >>>>>) */ + { 0x6c, KEY_KPMINUS }, /* (not named <<<<<) */ + + { 0x2d, KEY_MUTE }, /* Mute */ + { 0x30, KEY_VOLUMEUP }, /* Volume up */ + { 0x31, KEY_VOLUMEDOWN }, /* Volume down */ + { 0x60, KEY_CHANNELUP }, /* Channel up */ + { 0x61, KEY_CHANNELDOWN }, /* Channel down */ + + { 0x3f, KEY_RECORD }, /* Record */ + { 0x37, KEY_PLAY }, /* Play */ + { 0x36, KEY_PAUSE }, /* Pause */ + { 0x2b, KEY_STOP }, /* Stop */ + { 0x67, KEY_FASTFORWARD }, /* Foward */ + { 0x66, KEY_REWIND }, /* Rewind */ + { 0x3e, KEY_SEARCH }, /* Auto Scan */ + { 0x2e, KEY_CAMERA }, /* Capture Video */ + { 0x6d, KEY_MENU }, /* Show/Hide Control */ + { 0x2f, KEY_ZOOM }, /* Full Screen */ + { 0x34, KEY_RADIO }, /* FM */ + { 0x65, KEY_POWER }, /* Computer power */ +}; + +static struct rc_keymap norwood_map = { + .map = { + .scan = norwood, + .size = ARRAY_SIZE(norwood), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_NORWOOD, + } +}; + +static int __init init_rc_map_norwood(void) +{ + return ir_register_map(&norwood_map); +} + +static void __exit exit_rc_map_norwood(void) +{ + ir_unregister_map(&norwood_map); +} + +module_init(init_rc_map_norwood) +module_exit(exit_rc_map_norwood) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-npgtech.c b/drivers/media/IR/keymaps/rc-npgtech.c new file mode 100644 index 00000000000..b9ece1e9029 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-npgtech.c @@ -0,0 +1,80 @@ +/* npgtech.h - Keytable for npgtech Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode npgtech[] = { + { 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */ + { 0x2a, KEY_FRONT }, + + { 0x3e, KEY_1 }, + { 0x02, KEY_2 }, + { 0x06, KEY_3 }, + { 0x0a, KEY_4 }, + { 0x0e, KEY_5 }, + { 0x12, KEY_6 }, + { 0x16, KEY_7 }, + { 0x1a, KEY_8 }, + { 0x1e, KEY_9 }, + { 0x3a, KEY_0 }, + { 0x22, KEY_NUMLOCK }, /* -/-- */ + { 0x20, KEY_REFRESH }, + + { 0x03, KEY_BRIGHTNESSDOWN }, + { 0x28, KEY_AUDIO }, + { 0x3c, KEY_CHANNELUP }, + { 0x3f, KEY_VOLUMEDOWN }, + { 0x2e, KEY_MUTE }, + { 0x3b, KEY_VOLUMEUP }, + { 0x00, KEY_CHANNELDOWN }, + { 0x07, KEY_BRIGHTNESSUP }, + { 0x2c, KEY_TEXT }, + + { 0x37, KEY_RECORD }, + { 0x17, KEY_PLAY }, + { 0x13, KEY_PAUSE }, + { 0x26, KEY_STOP }, + { 0x18, KEY_FASTFORWARD }, + { 0x14, KEY_REWIND }, + { 0x33, KEY_ZOOM }, + { 0x32, KEY_KEYBOARD }, + { 0x30, KEY_GOTO }, /* Pointing arrow */ + { 0x36, KEY_MACRO }, /* Maximize/Minimize (yellow) */ + { 0x0b, KEY_RADIO }, + { 0x10, KEY_POWER }, + +}; + +static struct rc_keymap npgtech_map = { + .map = { + .scan = npgtech, + .size = ARRAY_SIZE(npgtech), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_NPGTECH, + } +}; + +static int __init init_rc_map_npgtech(void) +{ + return ir_register_map(&npgtech_map); +} + +static void __exit exit_rc_map_npgtech(void) +{ + ir_unregister_map(&npgtech_map); +} + +module_init(init_rc_map_npgtech) +module_exit(exit_rc_map_npgtech) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pctv-sedna.c b/drivers/media/IR/keymaps/rc-pctv-sedna.c new file mode 100644 index 00000000000..4129bb44a25 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pctv-sedna.c @@ -0,0 +1,80 @@ +/* pctv-sedna.h - Keytable for pctv_sedna Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Mapping for the 28 key remote control as seen at + http://www.sednacomputer.com/photo/cardbus-tv.jpg + Pavel Mihaylov <bin@bash.info> + Also for the remote bundled with Kozumi KTV-01C card */ + +static struct ir_scancode pctv_sedna[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0a, KEY_AGAIN }, /* Recall */ + { 0x0b, KEY_CHANNELUP }, + { 0x0c, KEY_VOLUMEUP }, + { 0x0d, KEY_MODE }, /* Stereo */ + { 0x0e, KEY_STOP }, + { 0x0f, KEY_PREVIOUSSONG }, + { 0x10, KEY_ZOOM }, + { 0x11, KEY_TUNER }, /* Source */ + { 0x12, KEY_POWER }, + { 0x13, KEY_MUTE }, + { 0x15, KEY_CHANNELDOWN }, + { 0x18, KEY_VOLUMEDOWN }, + { 0x19, KEY_CAMERA }, /* Snapshot */ + { 0x1a, KEY_NEXTSONG }, + { 0x1b, KEY_TIME }, /* Time Shift */ + { 0x1c, KEY_RADIO }, /* FM Radio */ + { 0x1d, KEY_RECORD }, + { 0x1e, KEY_PAUSE }, + /* additional codes for Kozumi's remote */ + { 0x14, KEY_INFO }, /* OSD */ + { 0x16, KEY_OK }, /* OK */ + { 0x17, KEY_DIGITS }, /* Plus */ + { 0x1f, KEY_PLAY }, /* Play */ +}; + +static struct rc_keymap pctv_sedna_map = { + .map = { + .scan = pctv_sedna, + .size = ARRAY_SIZE(pctv_sedna), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PCTV_SEDNA, + } +}; + +static int __init init_rc_map_pctv_sedna(void) +{ + return ir_register_map(&pctv_sedna_map); +} + +static void __exit exit_rc_map_pctv_sedna(void) +{ + ir_unregister_map(&pctv_sedna_map); +} + +module_init(init_rc_map_pctv_sedna) +module_exit(exit_rc_map_pctv_sedna) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pinnacle-color.c b/drivers/media/IR/keymaps/rc-pinnacle-color.c new file mode 100644 index 00000000000..326e023ce12 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pinnacle-color.c @@ -0,0 +1,94 @@ +/* pinnacle-color.h - Keytable for pinnacle_color Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode pinnacle_color[] = { + { 0x59, KEY_MUTE }, + { 0x4a, KEY_POWER }, + + { 0x18, KEY_TEXT }, + { 0x26, KEY_TV }, + { 0x3d, KEY_PRINT }, + + { 0x48, KEY_RED }, + { 0x04, KEY_GREEN }, + { 0x11, KEY_YELLOW }, + { 0x00, KEY_BLUE }, + + { 0x2d, KEY_VOLUMEUP }, + { 0x1e, KEY_VOLUMEDOWN }, + + { 0x49, KEY_MENU }, + + { 0x16, KEY_CHANNELUP }, + { 0x17, KEY_CHANNELDOWN }, + + { 0x20, KEY_UP }, + { 0x21, KEY_DOWN }, + { 0x22, KEY_LEFT }, + { 0x23, KEY_RIGHT }, + { 0x0d, KEY_SELECT }, + + { 0x08, KEY_BACK }, + { 0x07, KEY_REFRESH }, + + { 0x2f, KEY_ZOOM }, + { 0x29, KEY_RECORD }, + + { 0x4b, KEY_PAUSE }, + { 0x4d, KEY_REWIND }, + { 0x2e, KEY_PLAY }, + { 0x4e, KEY_FORWARD }, + { 0x53, KEY_PREVIOUS }, + { 0x4c, KEY_STOP }, + { 0x54, KEY_NEXT }, + + { 0x69, KEY_0 }, + { 0x6a, KEY_1 }, + { 0x6b, KEY_2 }, + { 0x6c, KEY_3 }, + { 0x6d, KEY_4 }, + { 0x6e, KEY_5 }, + { 0x6f, KEY_6 }, + { 0x70, KEY_7 }, + { 0x71, KEY_8 }, + { 0x72, KEY_9 }, + + { 0x74, KEY_CHANNEL }, + { 0x0a, KEY_BACKSPACE }, +}; + +static struct rc_keymap pinnacle_color_map = { + .map = { + .scan = pinnacle_color, + .size = ARRAY_SIZE(pinnacle_color), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PINNACLE_COLOR, + } +}; + +static int __init init_rc_map_pinnacle_color(void) +{ + return ir_register_map(&pinnacle_color_map); +} + +static void __exit exit_rc_map_pinnacle_color(void) +{ + ir_unregister_map(&pinnacle_color_map); +} + +module_init(init_rc_map_pinnacle_color) +module_exit(exit_rc_map_pinnacle_color) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pinnacle-grey.c b/drivers/media/IR/keymaps/rc-pinnacle-grey.c new file mode 100644 index 00000000000..14cb772515c --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pinnacle-grey.c @@ -0,0 +1,89 @@ +/* pinnacle-grey.h - Keytable for pinnacle_grey Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode pinnacle_grey[] = { + { 0x3a, KEY_0 }, + { 0x31, KEY_1 }, + { 0x32, KEY_2 }, + { 0x33, KEY_3 }, + { 0x34, KEY_4 }, + { 0x35, KEY_5 }, + { 0x36, KEY_6 }, + { 0x37, KEY_7 }, + { 0x38, KEY_8 }, + { 0x39, KEY_9 }, + + { 0x2f, KEY_POWER }, + + { 0x2e, KEY_P }, + { 0x1f, KEY_L }, + { 0x2b, KEY_I }, + + { 0x2d, KEY_SCREEN }, + { 0x1e, KEY_ZOOM }, + { 0x1b, KEY_VOLUMEUP }, + { 0x0f, KEY_VOLUMEDOWN }, + { 0x17, KEY_CHANNELUP }, + { 0x1c, KEY_CHANNELDOWN }, + { 0x25, KEY_INFO }, + + { 0x3c, KEY_MUTE }, + + { 0x3d, KEY_LEFT }, + { 0x3b, KEY_RIGHT }, + + { 0x3f, KEY_UP }, + { 0x3e, KEY_DOWN }, + { 0x1a, KEY_ENTER }, + + { 0x1d, KEY_MENU }, + { 0x19, KEY_AGAIN }, + { 0x16, KEY_PREVIOUSSONG }, + { 0x13, KEY_NEXTSONG }, + { 0x15, KEY_PAUSE }, + { 0x0e, KEY_REWIND }, + { 0x0d, KEY_PLAY }, + { 0x0b, KEY_STOP }, + { 0x07, KEY_FORWARD }, + { 0x27, KEY_RECORD }, + { 0x26, KEY_TUNER }, + { 0x29, KEY_TEXT }, + { 0x2a, KEY_MEDIA }, + { 0x18, KEY_EPG }, +}; + +static struct rc_keymap pinnacle_grey_map = { + .map = { + .scan = pinnacle_grey, + .size = ARRAY_SIZE(pinnacle_grey), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PINNACLE_GREY, + } +}; + +static int __init init_rc_map_pinnacle_grey(void) +{ + return ir_register_map(&pinnacle_grey_map); +} + +static void __exit exit_rc_map_pinnacle_grey(void) +{ + ir_unregister_map(&pinnacle_grey_map); +} + +module_init(init_rc_map_pinnacle_grey) +module_exit(exit_rc_map_pinnacle_grey) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c new file mode 100644 index 00000000000..835bf4ef8de --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c @@ -0,0 +1,73 @@ +/* pinnacle-pctv-hd.h - Keytable for pinnacle_pctv_hd Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Pinnacle PCTV HD 800i mini remote */ + +static struct ir_scancode pinnacle_pctv_hd[] = { + + { 0x0f, KEY_1 }, + { 0x15, KEY_2 }, + { 0x10, KEY_3 }, + { 0x18, KEY_4 }, + { 0x1b, KEY_5 }, + { 0x1e, KEY_6 }, + { 0x11, KEY_7 }, + { 0x21, KEY_8 }, + { 0x12, KEY_9 }, + { 0x27, KEY_0 }, + + { 0x24, KEY_ZOOM }, + { 0x2a, KEY_SUBTITLE }, + + { 0x00, KEY_MUTE }, + { 0x01, KEY_ENTER }, /* Pinnacle Logo */ + { 0x39, KEY_POWER }, + + { 0x03, KEY_VOLUMEUP }, + { 0x09, KEY_VOLUMEDOWN }, + { 0x06, KEY_CHANNELUP }, + { 0x0c, KEY_CHANNELDOWN }, + + { 0x2d, KEY_REWIND }, + { 0x30, KEY_PLAYPAUSE }, + { 0x33, KEY_FASTFORWARD }, + { 0x3c, KEY_STOP }, + { 0x36, KEY_RECORD }, + { 0x3f, KEY_EPG }, /* Labeled "?" */ +}; + +static struct rc_keymap pinnacle_pctv_hd_map = { + .map = { + .scan = pinnacle_pctv_hd, + .size = ARRAY_SIZE(pinnacle_pctv_hd), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PINNACLE_PCTV_HD, + } +}; + +static int __init init_rc_map_pinnacle_pctv_hd(void) +{ + return ir_register_map(&pinnacle_pctv_hd_map); +} + +static void __exit exit_rc_map_pinnacle_pctv_hd(void) +{ + ir_unregister_map(&pinnacle_pctv_hd_map); +} + +module_init(init_rc_map_pinnacle_pctv_hd) +module_exit(exit_rc_map_pinnacle_pctv_hd) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pixelview-mk12.c b/drivers/media/IR/keymaps/rc-pixelview-mk12.c new file mode 100644 index 00000000000..5a735d569a8 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pixelview-mk12.c @@ -0,0 +1,83 @@ +/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Keytable for MK-F12 IR remote provided together with Pixelview + * Ultra Pro Remote Controller. Uses NEC extended format. + */ +static struct ir_scancode pixelview_mk12[] = { + { 0x866b03, KEY_TUNER }, /* Timeshift */ + { 0x866b1e, KEY_POWER2 }, /* power */ + + { 0x866b01, KEY_1 }, + { 0x866b0b, KEY_2 }, + { 0x866b1b, KEY_3 }, + { 0x866b05, KEY_4 }, + { 0x866b09, KEY_5 }, + { 0x866b15, KEY_6 }, + { 0x866b06, KEY_7 }, + { 0x866b0a, KEY_8 }, + { 0x866b12, KEY_9 }, + { 0x866b02, KEY_0 }, + + { 0x866b13, KEY_AGAIN }, /* loop */ + { 0x866b10, KEY_DIGITS }, /* +100 */ + + { 0x866b00, KEY_MEDIA }, /* source */ + { 0x866b18, KEY_MUTE }, /* mute */ + { 0x866b19, KEY_CAMERA }, /* snapshot */ + { 0x866b1a, KEY_SEARCH }, /* scan */ + + { 0x866b16, KEY_CHANNELUP }, /* chn + */ + { 0x866b14, KEY_CHANNELDOWN }, /* chn - */ + { 0x866b1f, KEY_VOLUMEUP }, /* vol + */ + { 0x866b17, KEY_VOLUMEDOWN }, /* vol - */ + { 0x866b1c, KEY_ZOOM }, /* zoom */ + + { 0x866b04, KEY_REWIND }, + { 0x866b0e, KEY_RECORD }, + { 0x866b0c, KEY_FORWARD }, + + { 0x866b1d, KEY_STOP }, + { 0x866b08, KEY_PLAY }, + { 0x866b0f, KEY_PAUSE }, + + { 0x866b0d, KEY_TV }, + { 0x866b07, KEY_RADIO }, /* FM */ +}; + +static struct rc_keymap pixelview_map = { + .map = { + .scan = pixelview_mk12, + .size = ARRAY_SIZE(pixelview_mk12), + .ir_type = IR_TYPE_NEC, + .name = RC_MAP_PIXELVIEW_MK12, + } +}; + +static int __init init_rc_map_pixelview(void) +{ + return ir_register_map(&pixelview_map); +} + +static void __exit exit_rc_map_pixelview(void) +{ + ir_unregister_map(&pixelview_map); +} + +module_init(init_rc_map_pixelview) +module_exit(exit_rc_map_pixelview) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pixelview-new.c b/drivers/media/IR/keymaps/rc-pixelview-new.c new file mode 100644 index 00000000000..7bbbbf5735e --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pixelview-new.c @@ -0,0 +1,83 @@ +/* pixelview-new.h - Keytable for pixelview_new Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + Mauro Carvalho Chehab <mchehab@infradead.org> + present on PV MPEG 8000GT + */ + +static struct ir_scancode pixelview_new[] = { + { 0x3c, KEY_TIME }, /* Timeshift */ + { 0x12, KEY_POWER }, + + { 0x3d, KEY_1 }, + { 0x38, KEY_2 }, + { 0x18, KEY_3 }, + { 0x35, KEY_4 }, + { 0x39, KEY_5 }, + { 0x15, KEY_6 }, + { 0x36, KEY_7 }, + { 0x3a, KEY_8 }, + { 0x1e, KEY_9 }, + { 0x3e, KEY_0 }, + + { 0x1c, KEY_AGAIN }, /* LOOP */ + { 0x3f, KEY_MEDIA }, /* Source */ + { 0x1f, KEY_LAST }, /* +100 */ + { 0x1b, KEY_MUTE }, + + { 0x17, KEY_CHANNELDOWN }, + { 0x16, KEY_CHANNELUP }, + { 0x10, KEY_VOLUMEUP }, + { 0x14, KEY_VOLUMEDOWN }, + { 0x13, KEY_ZOOM }, + + { 0x19, KEY_CAMERA }, /* SNAPSHOT */ + { 0x1a, KEY_SEARCH }, /* scan */ + + { 0x37, KEY_REWIND }, /* << */ + { 0x32, KEY_RECORD }, /* o (red) */ + { 0x33, KEY_FORWARD }, /* >> */ + { 0x11, KEY_STOP }, /* square */ + { 0x3b, KEY_PLAY }, /* > */ + { 0x30, KEY_PLAYPAUSE }, /* || */ + + { 0x31, KEY_TV }, + { 0x34, KEY_RADIO }, +}; + +static struct rc_keymap pixelview_new_map = { + .map = { + .scan = pixelview_new, + .size = ARRAY_SIZE(pixelview_new), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PIXELVIEW_NEW, + } +}; + +static int __init init_rc_map_pixelview_new(void) +{ + return ir_register_map(&pixelview_new_map); +} + +static void __exit exit_rc_map_pixelview_new(void) +{ + ir_unregister_map(&pixelview_new_map); +} + +module_init(init_rc_map_pixelview_new) +module_exit(exit_rc_map_pixelview_new) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pixelview.c b/drivers/media/IR/keymaps/rc-pixelview.c new file mode 100644 index 00000000000..82ff12e182a --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pixelview.c @@ -0,0 +1,82 @@ +/* pixelview.h - Keytable for pixelview Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode pixelview[] = { + + { 0x1e, KEY_POWER }, /* power */ + { 0x07, KEY_MEDIA }, /* source */ + { 0x1c, KEY_SEARCH }, /* scan */ + + + { 0x03, KEY_TUNER }, /* TV/FM */ + + { 0x00, KEY_RECORD }, + { 0x08, KEY_STOP }, + { 0x11, KEY_PLAY }, + + { 0x1a, KEY_PLAYPAUSE }, /* freeze */ + { 0x19, KEY_ZOOM }, /* zoom */ + { 0x0f, KEY_TEXT }, /* min */ + + { 0x01, KEY_1 }, + { 0x0b, KEY_2 }, + { 0x1b, KEY_3 }, + { 0x05, KEY_4 }, + { 0x09, KEY_5 }, + { 0x15, KEY_6 }, + { 0x06, KEY_7 }, + { 0x0a, KEY_8 }, + { 0x12, KEY_9 }, + { 0x02, KEY_0 }, + { 0x10, KEY_LAST }, /* +100 */ + { 0x13, KEY_LIST }, /* recall */ + + { 0x1f, KEY_CHANNELUP }, /* chn down */ + { 0x17, KEY_CHANNELDOWN }, /* chn up */ + { 0x16, KEY_VOLUMEUP }, /* vol down */ + { 0x14, KEY_VOLUMEDOWN }, /* vol up */ + + { 0x04, KEY_KPMINUS }, /* <<< */ + { 0x0e, KEY_SETUP }, /* function */ + { 0x0c, KEY_KPPLUS }, /* >>> */ + + { 0x0d, KEY_GOTO }, /* mts */ + { 0x1d, KEY_REFRESH }, /* reset */ + { 0x18, KEY_MUTE }, /* mute/unmute */ +}; + +static struct rc_keymap pixelview_map = { + .map = { + .scan = pixelview, + .size = ARRAY_SIZE(pixelview), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PIXELVIEW, + } +}; + +static int __init init_rc_map_pixelview(void) +{ + return ir_register_map(&pixelview_map); +} + +static void __exit exit_rc_map_pixelview(void) +{ + ir_unregister_map(&pixelview_map); +} + +module_init(init_rc_map_pixelview) +module_exit(exit_rc_map_pixelview) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-powercolor-real-angel.c b/drivers/media/IR/keymaps/rc-powercolor-real-angel.c new file mode 100644 index 00000000000..7cef8190a22 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-powercolor-real-angel.c @@ -0,0 +1,81 @@ +/* powercolor-real-angel.h - Keytable for powercolor_real_angel Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Remote control for Powercolor Real Angel 330 + * Daniel Fraga <fragabr@gmail.com> + */ + +static struct ir_scancode powercolor_real_angel[] = { + { 0x38, KEY_SWITCHVIDEOMODE }, /* switch inputs */ + { 0x0c, KEY_MEDIA }, /* Turn ON/OFF App */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0a, KEY_DIGITS }, /* single, double, tripple digit */ + { 0x29, KEY_PREVIOUS }, /* previous channel */ + { 0x12, KEY_BRIGHTNESSUP }, + { 0x13, KEY_BRIGHTNESSDOWN }, + { 0x2b, KEY_MODE }, /* stereo/mono */ + { 0x2c, KEY_TEXT }, /* teletext */ + { 0x20, KEY_CHANNELUP }, /* channel up */ + { 0x21, KEY_CHANNELDOWN }, /* channel down */ + { 0x10, KEY_VOLUMEUP }, /* volume up */ + { 0x11, KEY_VOLUMEDOWN }, /* volume down */ + { 0x0d, KEY_MUTE }, + { 0x1f, KEY_RECORD }, + { 0x17, KEY_PLAY }, + { 0x16, KEY_PAUSE }, + { 0x0b, KEY_STOP }, + { 0x27, KEY_FASTFORWARD }, + { 0x26, KEY_REWIND }, + { 0x1e, KEY_SEARCH }, /* autoscan */ + { 0x0e, KEY_CAMERA }, /* snapshot */ + { 0x2d, KEY_SETUP }, + { 0x0f, KEY_SCREEN }, /* full screen */ + { 0x14, KEY_RADIO }, /* FM radio */ + { 0x25, KEY_POWER }, /* power */ +}; + +static struct rc_keymap powercolor_real_angel_map = { + .map = { + .scan = powercolor_real_angel, + .size = ARRAY_SIZE(powercolor_real_angel), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_POWERCOLOR_REAL_ANGEL, + } +}; + +static int __init init_rc_map_powercolor_real_angel(void) +{ + return ir_register_map(&powercolor_real_angel_map); +} + +static void __exit exit_rc_map_powercolor_real_angel(void) +{ + ir_unregister_map(&powercolor_real_angel_map); +} + +module_init(init_rc_map_powercolor_real_angel) +module_exit(exit_rc_map_powercolor_real_angel) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-proteus-2309.c b/drivers/media/IR/keymaps/rc-proteus-2309.c new file mode 100644 index 00000000000..22e92d39dee --- /dev/null +++ b/drivers/media/IR/keymaps/rc-proteus-2309.c @@ -0,0 +1,69 @@ +/* proteus-2309.h - Keytable for proteus_2309 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Michal Majchrowicz <mmajchrowicz@gmail.com> */ + +static struct ir_scancode proteus_2309[] = { + /* numeric */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x5c, KEY_POWER }, /* power */ + { 0x20, KEY_ZOOM }, /* full screen */ + { 0x0f, KEY_BACKSPACE }, /* recall */ + { 0x1b, KEY_ENTER }, /* mute */ + { 0x41, KEY_RECORD }, /* record */ + { 0x43, KEY_STOP }, /* stop */ + { 0x16, KEY_S }, + { 0x1a, KEY_POWER2 }, /* off */ + { 0x2e, KEY_RED }, + { 0x1f, KEY_CHANNELDOWN }, /* channel - */ + { 0x1c, KEY_CHANNELUP }, /* channel + */ + { 0x10, KEY_VOLUMEDOWN }, /* volume - */ + { 0x1e, KEY_VOLUMEUP }, /* volume + */ + { 0x14, KEY_F1 }, +}; + +static struct rc_keymap proteus_2309_map = { + .map = { + .scan = proteus_2309, + .size = ARRAY_SIZE(proteus_2309), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PROTEUS_2309, + } +}; + +static int __init init_rc_map_proteus_2309(void) +{ + return ir_register_map(&proteus_2309_map); +} + +static void __exit exit_rc_map_proteus_2309(void) +{ + ir_unregister_map(&proteus_2309_map); +} + +module_init(init_rc_map_proteus_2309) +module_exit(exit_rc_map_proteus_2309) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-purpletv.c b/drivers/media/IR/keymaps/rc-purpletv.c new file mode 100644 index 00000000000..4e20fc2269f --- /dev/null +++ b/drivers/media/IR/keymaps/rc-purpletv.c @@ -0,0 +1,81 @@ +/* purpletv.h - Keytable for purpletv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode purpletv[] = { + { 0x03, KEY_POWER }, + { 0x6f, KEY_MUTE }, + { 0x10, KEY_BACKSPACE }, /* Recall */ + + { 0x11, KEY_0 }, + { 0x04, KEY_1 }, + { 0x05, KEY_2 }, + { 0x06, KEY_3 }, + { 0x08, KEY_4 }, + { 0x09, KEY_5 }, + { 0x0a, KEY_6 }, + { 0x0c, KEY_7 }, + { 0x0d, KEY_8 }, + { 0x0e, KEY_9 }, + { 0x12, KEY_DOT }, /* 100+ */ + + { 0x07, KEY_VOLUMEUP }, + { 0x0b, KEY_VOLUMEDOWN }, + { 0x1a, KEY_KPPLUS }, + { 0x18, KEY_KPMINUS }, + { 0x15, KEY_UP }, + { 0x1d, KEY_DOWN }, + { 0x0f, KEY_CHANNELUP }, + { 0x13, KEY_CHANNELDOWN }, + { 0x48, KEY_ZOOM }, + + { 0x1b, KEY_VIDEO }, /* Video source */ + { 0x1f, KEY_CAMERA }, /* Snapshot */ + { 0x49, KEY_LANGUAGE }, /* MTS Select */ + { 0x19, KEY_SEARCH }, /* Auto Scan */ + + { 0x4b, KEY_RECORD }, + { 0x46, KEY_PLAY }, + { 0x45, KEY_PAUSE }, /* Pause */ + { 0x44, KEY_STOP }, + { 0x43, KEY_TIME }, /* Time Shift */ + { 0x17, KEY_CHANNEL }, /* SURF CH */ + { 0x40, KEY_FORWARD }, /* Forward ? */ + { 0x42, KEY_REWIND }, /* Backward ? */ + +}; + +static struct rc_keymap purpletv_map = { + .map = { + .scan = purpletv, + .size = ARRAY_SIZE(purpletv), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PURPLETV, + } +}; + +static int __init init_rc_map_purpletv(void) +{ + return ir_register_map(&purpletv_map); +} + +static void __exit exit_rc_map_purpletv(void) +{ + ir_unregister_map(&purpletv_map); +} + +module_init(init_rc_map_purpletv) +module_exit(exit_rc_map_purpletv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-pv951.c b/drivers/media/IR/keymaps/rc-pv951.c new file mode 100644 index 00000000000..36679e706cf --- /dev/null +++ b/drivers/media/IR/keymaps/rc-pv951.c @@ -0,0 +1,78 @@ +/* pv951.h - Keytable for pv951 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Mark Phalan <phalanm@o2.ie> */ + +static struct ir_scancode pv951[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x12, KEY_POWER }, + { 0x10, KEY_MUTE }, + { 0x1f, KEY_VOLUMEDOWN }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1a, KEY_CHANNELUP }, + { 0x1e, KEY_CHANNELDOWN }, + { 0x0e, KEY_PAGEUP }, + { 0x1d, KEY_PAGEDOWN }, + { 0x13, KEY_SOUND }, + + { 0x18, KEY_KPPLUSMINUS }, /* CH +/- */ + { 0x16, KEY_SUBTITLE }, /* CC */ + { 0x0d, KEY_TEXT }, /* TTX */ + { 0x0b, KEY_TV }, /* AIR/CBL */ + { 0x11, KEY_PC }, /* PC/TV */ + { 0x17, KEY_OK }, /* CH RTN */ + { 0x19, KEY_MODE }, /* FUNC */ + { 0x0c, KEY_SEARCH }, /* AUTOSCAN */ + + /* Not sure what to do with these ones! */ + { 0x0f, KEY_SELECT }, /* SOURCE */ + { 0x0a, KEY_KPPLUS }, /* +100 */ + { 0x14, KEY_EQUAL }, /* SYNC */ + { 0x1c, KEY_MEDIA }, /* PC/TV */ +}; + +static struct rc_keymap pv951_map = { + .map = { + .scan = pv951, + .size = ARRAY_SIZE(pv951), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PV951, + } +}; + +static int __init init_rc_map_pv951(void) +{ + return ir_register_map(&pv951_map); +} + +static void __exit exit_rc_map_pv951(void) +{ + ir_unregister_map(&pv951_map); +} + +module_init(init_rc_map_pv951) +module_exit(exit_rc_map_pv951) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c new file mode 100644 index 00000000000..cc6b8f54874 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c @@ -0,0 +1,103 @@ +/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Hauppauge:the newer, gray remotes (seems there are multiple + * slightly different versions), shipped with cx88+ivtv cards. + * + * This table contains the complete RC5 code, instead of just the data part + */ + +static struct ir_scancode rc5_hauppauge_new[] = { + /* Keys 0 to 9 */ + { 0x1e00, KEY_0 }, + { 0x1e01, KEY_1 }, + { 0x1e02, KEY_2 }, + { 0x1e03, KEY_3 }, + { 0x1e04, KEY_4 }, + { 0x1e05, KEY_5 }, + { 0x1e06, KEY_6 }, + { 0x1e07, KEY_7 }, + { 0x1e08, KEY_8 }, + { 0x1e09, KEY_9 }, + + { 0x1e0a, KEY_TEXT }, /* keypad asterisk as well */ + { 0x1e0b, KEY_RED }, /* red button */ + { 0x1e0c, KEY_RADIO }, + { 0x1e0d, KEY_MENU }, + { 0x1e0e, KEY_SUBTITLE }, /* also the # key */ + { 0x1e0f, KEY_MUTE }, + { 0x1e10, KEY_VOLUMEUP }, + { 0x1e11, KEY_VOLUMEDOWN }, + { 0x1e12, KEY_PREVIOUS }, /* previous channel */ + { 0x1e14, KEY_UP }, + { 0x1e15, KEY_DOWN }, + { 0x1e16, KEY_LEFT }, + { 0x1e17, KEY_RIGHT }, + { 0x1e18, KEY_VIDEO }, /* Videos */ + { 0x1e19, KEY_AUDIO }, /* Music */ + /* 0x1e1a: Pictures - presume this means + "Multimedia Home Platform" - + no "PICTURES" key in input.h + */ + { 0x1e1a, KEY_MHP }, + + { 0x1e1b, KEY_EPG }, /* Guide */ + { 0x1e1c, KEY_TV }, + { 0x1e1e, KEY_NEXTSONG }, /* skip >| */ + { 0x1e1f, KEY_EXIT }, /* back/exit */ + { 0x1e20, KEY_CHANNELUP }, /* channel / program + */ + { 0x1e21, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x1e22, KEY_CHANNEL }, /* source (old black remote) */ + { 0x1e24, KEY_PREVIOUSSONG }, /* replay |< */ + { 0x1e25, KEY_ENTER }, /* OK */ + { 0x1e26, KEY_SLEEP }, /* minimize (old black remote) */ + { 0x1e29, KEY_BLUE }, /* blue key */ + { 0x1e2e, KEY_GREEN }, /* green button */ + { 0x1e30, KEY_PAUSE }, /* pause */ + { 0x1e32, KEY_REWIND }, /* backward << */ + { 0x1e34, KEY_FASTFORWARD }, /* forward >> */ + { 0x1e35, KEY_PLAY }, + { 0x1e36, KEY_STOP }, + { 0x1e37, KEY_RECORD }, /* recording */ + { 0x1e38, KEY_YELLOW }, /* yellow key */ + { 0x1e3b, KEY_SELECT }, /* top right button */ + { 0x1e3c, KEY_ZOOM }, /* full */ + { 0x1e3d, KEY_POWER }, /* system power (green button) */ +}; + +static struct rc_keymap rc5_hauppauge_new_map = { + .map = { + .scan = rc5_hauppauge_new, + .size = ARRAY_SIZE(rc5_hauppauge_new), + .ir_type = IR_TYPE_RC5, + .name = RC_MAP_RC5_HAUPPAUGE_NEW, + } +}; + +static int __init init_rc_map_rc5_hauppauge_new(void) +{ + return ir_register_map(&rc5_hauppauge_new_map); +} + +static void __exit exit_rc_map_rc5_hauppauge_new(void) +{ + ir_unregister_map(&rc5_hauppauge_new_map); +} + +module_init(init_rc_map_rc5_hauppauge_new) +module_exit(exit_rc_map_rc5_hauppauge_new) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-rc5-tv.c b/drivers/media/IR/keymaps/rc-rc5-tv.c new file mode 100644 index 00000000000..73cce2f8ddf --- /dev/null +++ b/drivers/media/IR/keymaps/rc-rc5-tv.c @@ -0,0 +1,81 @@ +/* rc5-tv.h - Keytable for rc5_tv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* generic RC5 keytable */ +/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */ +/* used by old (black) Hauppauge remotes */ + +static struct ir_scancode rc5_tv[] = { + /* Keys 0 to 9 */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0b, KEY_CHANNEL }, /* channel / program (japan: 11) */ + { 0x0c, KEY_POWER }, /* standby */ + { 0x0d, KEY_MUTE }, /* mute / demute */ + { 0x0f, KEY_TV }, /* display */ + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x12, KEY_BRIGHTNESSUP }, + { 0x13, KEY_BRIGHTNESSDOWN }, + { 0x1e, KEY_SEARCH }, /* search + */ + { 0x20, KEY_CHANNELUP }, /* channel / program + */ + { 0x21, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x22, KEY_CHANNEL }, /* alt / channel */ + { 0x23, KEY_LANGUAGE }, /* 1st / 2nd language */ + { 0x26, KEY_SLEEP }, /* sleeptimer */ + { 0x2e, KEY_MENU }, /* 2nd controls (USA: menu) */ + { 0x30, KEY_PAUSE }, + { 0x32, KEY_REWIND }, + { 0x33, KEY_GOTO }, + { 0x35, KEY_PLAY }, + { 0x36, KEY_STOP }, + { 0x37, KEY_RECORD }, /* recording */ + { 0x3c, KEY_TEXT }, /* teletext submode (Japan: 12) */ + { 0x3d, KEY_SUSPEND }, /* system standby */ + +}; + +static struct rc_keymap rc5_tv_map = { + .map = { + .scan = rc5_tv, + .size = ARRAY_SIZE(rc5_tv), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_RC5_TV, + } +}; + +static int __init init_rc_map_rc5_tv(void) +{ + return ir_register_map(&rc5_tv_map); +} + +static void __exit exit_rc_map_rc5_tv(void) +{ + ir_unregister_map(&rc5_tv_map); +} + +module_init(init_rc_map_rc5_tv) +module_exit(exit_rc_map_rc5_tv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c new file mode 100644 index 00000000000..ab1a6d2baf7 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c @@ -0,0 +1,78 @@ +/* real-audio-220-32-keys.h - Keytable for real_audio_220_32_keys Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Zogis Real Audio 220 - 32 keys IR */ + +static struct ir_scancode real_audio_220_32_keys[] = { + { 0x1c, KEY_RADIO}, + { 0x12, KEY_POWER2}, + + { 0x01, KEY_1}, + { 0x02, KEY_2}, + { 0x03, KEY_3}, + { 0x04, KEY_4}, + { 0x05, KEY_5}, + { 0x06, KEY_6}, + { 0x07, KEY_7}, + { 0x08, KEY_8}, + { 0x09, KEY_9}, + { 0x00, KEY_0}, + + { 0x0c, KEY_VOLUMEUP}, + { 0x18, KEY_VOLUMEDOWN}, + { 0x0b, KEY_CHANNELUP}, + { 0x15, KEY_CHANNELDOWN}, + { 0x16, KEY_ENTER}, + + { 0x11, KEY_LIST}, /* Source */ + { 0x0d, KEY_AUDIO}, /* stereo */ + + { 0x0f, KEY_PREVIOUS}, /* Prev */ + { 0x1b, KEY_TIME}, /* Timeshift */ + { 0x1a, KEY_NEXT}, /* Next */ + + { 0x0e, KEY_STOP}, + { 0x1f, KEY_PLAY}, + { 0x1e, KEY_PLAYPAUSE}, /* Pause */ + + { 0x1d, KEY_RECORD}, + { 0x13, KEY_MUTE}, + { 0x19, KEY_CAMERA}, /* Snapshot */ + +}; + +static struct rc_keymap real_audio_220_32_keys_map = { + .map = { + .scan = real_audio_220_32_keys, + .size = ARRAY_SIZE(real_audio_220_32_keys), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_REAL_AUDIO_220_32_KEYS, + } +}; + +static int __init init_rc_map_real_audio_220_32_keys(void) +{ + return ir_register_map(&real_audio_220_32_keys_map); +} + +static void __exit exit_rc_map_real_audio_220_32_keys(void) +{ + ir_unregister_map(&real_audio_220_32_keys_map); +} + +module_init(init_rc_map_real_audio_220_32_keys) +module_exit(exit_rc_map_real_audio_220_32_keys) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-tbs-nec.c b/drivers/media/IR/keymaps/rc-tbs-nec.c new file mode 100644 index 00000000000..3309631e6f8 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-tbs-nec.c @@ -0,0 +1,73 @@ +/* tbs-nec.h - Keytable for tbs_nec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode tbs_nec[] = { + { 0x04, KEY_POWER2}, /*power*/ + { 0x14, KEY_MUTE}, /*mute*/ + { 0x07, KEY_1}, + { 0x06, KEY_2}, + { 0x05, KEY_3}, + { 0x0b, KEY_4}, + { 0x0a, KEY_5}, + { 0x09, KEY_6}, + { 0x0f, KEY_7}, + { 0x0e, KEY_8}, + { 0x0d, KEY_9}, + { 0x12, KEY_0}, + { 0x16, KEY_CHANNELUP}, /*ch+*/ + { 0x11, KEY_CHANNELDOWN},/*ch-*/ + { 0x13, KEY_VOLUMEUP}, /*vol+*/ + { 0x0c, KEY_VOLUMEDOWN},/*vol-*/ + { 0x03, KEY_RECORD}, /*rec*/ + { 0x18, KEY_PAUSE}, /*pause*/ + { 0x19, KEY_OK}, /*ok*/ + { 0x1a, KEY_CAMERA}, /* snapshot */ + { 0x01, KEY_UP}, + { 0x10, KEY_LEFT}, + { 0x02, KEY_RIGHT}, + { 0x08, KEY_DOWN}, + { 0x15, KEY_FAVORITES}, + { 0x17, KEY_SUBTITLE}, + { 0x1d, KEY_ZOOM}, + { 0x1f, KEY_EXIT}, + { 0x1e, KEY_MENU}, + { 0x1c, KEY_EPG}, + { 0x00, KEY_PREVIOUS}, + { 0x1b, KEY_MODE}, +}; + +static struct rc_keymap tbs_nec_map = { + .map = { + .scan = tbs_nec, + .size = ARRAY_SIZE(tbs_nec), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TBS_NEC, + } +}; + +static int __init init_rc_map_tbs_nec(void) +{ + return ir_register_map(&tbs_nec_map); +} + +static void __exit exit_rc_map_tbs_nec(void) +{ + ir_unregister_map(&tbs_nec_map); +} + +module_init(init_rc_map_tbs_nec) +module_exit(exit_rc_map_tbs_nec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c new file mode 100644 index 00000000000..5326a0b444c --- /dev/null +++ b/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c @@ -0,0 +1,92 @@ +/* terratec-cinergy-xs.h - Keytable for terratec_cinergy_xs Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Terratec Cinergy Hybrid T USB XS + Devin Heitmueller <dheitmueller@linuxtv.org> + */ + +static struct ir_scancode terratec_cinergy_xs[] = { + { 0x41, KEY_HOME}, + { 0x01, KEY_POWER}, + { 0x42, KEY_MENU}, + { 0x02, KEY_1}, + { 0x03, KEY_2}, + { 0x04, KEY_3}, + { 0x43, KEY_SUBTITLE}, + { 0x05, KEY_4}, + { 0x06, KEY_5}, + { 0x07, KEY_6}, + { 0x44, KEY_TEXT}, + { 0x08, KEY_7}, + { 0x09, KEY_8}, + { 0x0a, KEY_9}, + { 0x45, KEY_DELETE}, + { 0x0b, KEY_TUNER}, + { 0x0c, KEY_0}, + { 0x0d, KEY_MODE}, + { 0x46, KEY_TV}, + { 0x47, KEY_DVD}, + { 0x49, KEY_VIDEO}, + { 0x4b, KEY_AUX}, + { 0x10, KEY_UP}, + { 0x11, KEY_LEFT}, + { 0x12, KEY_OK}, + { 0x13, KEY_RIGHT}, + { 0x14, KEY_DOWN}, + { 0x0f, KEY_EPG}, + { 0x16, KEY_INFO}, + { 0x4d, KEY_BACKSPACE}, + { 0x1c, KEY_VOLUMEUP}, + { 0x4c, KEY_PLAY}, + { 0x1b, KEY_CHANNELUP}, + { 0x1e, KEY_VOLUMEDOWN}, + { 0x1d, KEY_MUTE}, + { 0x1f, KEY_CHANNELDOWN}, + { 0x17, KEY_RED}, + { 0x18, KEY_GREEN}, + { 0x19, KEY_YELLOW}, + { 0x1a, KEY_BLUE}, + { 0x58, KEY_RECORD}, + { 0x48, KEY_STOP}, + { 0x40, KEY_PAUSE}, + { 0x54, KEY_LAST}, + { 0x4e, KEY_REWIND}, + { 0x4f, KEY_FASTFORWARD}, + { 0x5c, KEY_NEXT}, +}; + +static struct rc_keymap terratec_cinergy_xs_map = { + .map = { + .scan = terratec_cinergy_xs, + .size = ARRAY_SIZE(terratec_cinergy_xs), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TERRATEC_CINERGY_XS, + } +}; + +static int __init init_rc_map_terratec_cinergy_xs(void) +{ + return ir_register_map(&terratec_cinergy_xs_map); +} + +static void __exit exit_rc_map_terratec_cinergy_xs(void) +{ + ir_unregister_map(&terratec_cinergy_xs_map); +} + +module_init(init_rc_map_terratec_cinergy_xs) +module_exit(exit_rc_map_terratec_cinergy_xs) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-tevii-nec.c b/drivers/media/IR/keymaps/rc-tevii-nec.c new file mode 100644 index 00000000000..e30d411c07b --- /dev/null +++ b/drivers/media/IR/keymaps/rc-tevii-nec.c @@ -0,0 +1,88 @@ +/* tevii-nec.h - Keytable for tevii_nec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode tevii_nec[] = { + { 0x0a, KEY_POWER2}, + { 0x0c, KEY_MUTE}, + { 0x11, KEY_1}, + { 0x12, KEY_2}, + { 0x13, KEY_3}, + { 0x14, KEY_4}, + { 0x15, KEY_5}, + { 0x16, KEY_6}, + { 0x17, KEY_7}, + { 0x18, KEY_8}, + { 0x19, KEY_9}, + { 0x10, KEY_0}, + { 0x1c, KEY_MENU}, + { 0x0f, KEY_VOLUMEDOWN}, + { 0x1a, KEY_LAST}, + { 0x0e, KEY_OPEN}, + { 0x04, KEY_RECORD}, + { 0x09, KEY_VOLUMEUP}, + { 0x08, KEY_CHANNELUP}, + { 0x07, KEY_PVR}, + { 0x0b, KEY_TIME}, + { 0x02, KEY_RIGHT}, + { 0x03, KEY_LEFT}, + { 0x00, KEY_UP}, + { 0x1f, KEY_OK}, + { 0x01, KEY_DOWN}, + { 0x05, KEY_TUNER}, + { 0x06, KEY_CHANNELDOWN}, + { 0x40, KEY_PLAYPAUSE}, + { 0x1e, KEY_REWIND}, + { 0x1b, KEY_FAVORITES}, + { 0x1d, KEY_BACK}, + { 0x4d, KEY_FASTFORWARD}, + { 0x44, KEY_EPG}, + { 0x4c, KEY_INFO}, + { 0x41, KEY_AB}, + { 0x43, KEY_AUDIO}, + { 0x45, KEY_SUBTITLE}, + { 0x4a, KEY_LIST}, + { 0x46, KEY_F1}, + { 0x47, KEY_F2}, + { 0x5e, KEY_F3}, + { 0x5c, KEY_F4}, + { 0x52, KEY_F5}, + { 0x5a, KEY_F6}, + { 0x56, KEY_MODE}, + { 0x58, KEY_SWITCHVIDEOMODE}, +}; + +static struct rc_keymap tevii_nec_map = { + .map = { + .scan = tevii_nec, + .size = ARRAY_SIZE(tevii_nec), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TEVII_NEC, + } +}; + +static int __init init_rc_map_tevii_nec(void) +{ + return ir_register_map(&tevii_nec_map); +} + +static void __exit exit_rc_map_tevii_nec(void) +{ + ir_unregister_map(&tevii_nec_map); +} + +module_init(init_rc_map_tevii_nec) +module_exit(exit_rc_map_tevii_nec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-tt-1500.c b/drivers/media/IR/keymaps/rc-tt-1500.c new file mode 100644 index 00000000000..bc88de011d5 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-tt-1500.c @@ -0,0 +1,82 @@ +/* tt-1500.h - Keytable for tt_1500 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* for the Technotrend 1500 bundled remotes (grey and black): */ + +static struct ir_scancode tt_1500[] = { + { 0x01, KEY_POWER }, + { 0x02, KEY_SHUFFLE }, /* ? double-arrow key */ + { 0x03, KEY_1 }, + { 0x04, KEY_2 }, + { 0x05, KEY_3 }, + { 0x06, KEY_4 }, + { 0x07, KEY_5 }, + { 0x08, KEY_6 }, + { 0x09, KEY_7 }, + { 0x0a, KEY_8 }, + { 0x0b, KEY_9 }, + { 0x0c, KEY_0 }, + { 0x0d, KEY_UP }, + { 0x0e, KEY_LEFT }, + { 0x0f, KEY_OK }, + { 0x10, KEY_RIGHT }, + { 0x11, KEY_DOWN }, + { 0x12, KEY_INFO }, + { 0x13, KEY_EXIT }, + { 0x14, KEY_RED }, + { 0x15, KEY_GREEN }, + { 0x16, KEY_YELLOW }, + { 0x17, KEY_BLUE }, + { 0x18, KEY_MUTE }, + { 0x19, KEY_TEXT }, + { 0x1a, KEY_MODE }, /* ? TV/Radio */ + { 0x21, KEY_OPTION }, + { 0x22, KEY_EPG }, + { 0x23, KEY_CHANNELUP }, + { 0x24, KEY_CHANNELDOWN }, + { 0x25, KEY_VOLUMEUP }, + { 0x26, KEY_VOLUMEDOWN }, + { 0x27, KEY_SETUP }, + { 0x3a, KEY_RECORD }, /* these keys are only in the black remote */ + { 0x3b, KEY_PLAY }, + { 0x3c, KEY_STOP }, + { 0x3d, KEY_REWIND }, + { 0x3e, KEY_PAUSE }, + { 0x3f, KEY_FORWARD }, +}; + +static struct rc_keymap tt_1500_map = { + .map = { + .scan = tt_1500, + .size = ARRAY_SIZE(tt_1500), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TT_1500, + } +}; + +static int __init init_rc_map_tt_1500(void) +{ + return ir_register_map(&tt_1500_map); +} + +static void __exit exit_rc_map_tt_1500(void) +{ + ir_unregister_map(&tt_1500_map); +} + +module_init(init_rc_map_tt_1500) +module_exit(exit_rc_map_tt_1500) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-videomate-s350.c b/drivers/media/IR/keymaps/rc-videomate-s350.c new file mode 100644 index 00000000000..4df7fcd1d2f --- /dev/null +++ b/drivers/media/IR/keymaps/rc-videomate-s350.c @@ -0,0 +1,85 @@ +/* videomate-s350.h - Keytable for videomate_s350 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode videomate_s350[] = { + { 0x00, KEY_TV}, + { 0x01, KEY_DVD}, + { 0x04, KEY_RECORD}, + { 0x05, KEY_VIDEO}, /* TV/Video */ + { 0x07, KEY_STOP}, + { 0x08, KEY_PLAYPAUSE}, + { 0x0a, KEY_REWIND}, + { 0x0f, KEY_FASTFORWARD}, + { 0x10, KEY_CHANNELUP}, + { 0x12, KEY_VOLUMEUP}, + { 0x13, KEY_CHANNELDOWN}, + { 0x14, KEY_MUTE}, + { 0x15, KEY_VOLUMEDOWN}, + { 0x16, KEY_1}, + { 0x17, KEY_2}, + { 0x18, KEY_3}, + { 0x19, KEY_4}, + { 0x1a, KEY_5}, + { 0x1b, KEY_6}, + { 0x1c, KEY_7}, + { 0x1d, KEY_8}, + { 0x1e, KEY_9}, + { 0x1f, KEY_0}, + { 0x21, KEY_SLEEP}, + { 0x24, KEY_ZOOM}, + { 0x25, KEY_LAST}, /* Recall */ + { 0x26, KEY_SUBTITLE}, /* CC */ + { 0x27, KEY_LANGUAGE}, /* MTS */ + { 0x29, KEY_CHANNEL}, /* SURF */ + { 0x2b, KEY_A}, + { 0x2c, KEY_B}, + { 0x2f, KEY_CAMERA}, /* Snapshot */ + { 0x23, KEY_RADIO}, + { 0x02, KEY_PREVIOUSSONG}, + { 0x06, KEY_NEXTSONG}, + { 0x03, KEY_EPG}, + { 0x09, KEY_SETUP}, + { 0x22, KEY_BACKSPACE}, + { 0x0c, KEY_UP}, + { 0x0e, KEY_DOWN}, + { 0x0b, KEY_LEFT}, + { 0x0d, KEY_RIGHT}, + { 0x11, KEY_ENTER}, + { 0x20, KEY_TEXT}, +}; + +static struct rc_keymap videomate_s350_map = { + .map = { + .scan = videomate_s350, + .size = ARRAY_SIZE(videomate_s350), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_VIDEOMATE_S350, + } +}; + +static int __init init_rc_map_videomate_s350(void) +{ + return ir_register_map(&videomate_s350_map); +} + +static void __exit exit_rc_map_videomate_s350(void) +{ + ir_unregister_map(&videomate_s350_map); +} + +module_init(init_rc_map_videomate_s350) +module_exit(exit_rc_map_videomate_s350) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c b/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c new file mode 100644 index 00000000000..776b0a638d8 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c @@ -0,0 +1,87 @@ +/* videomate-tv-pvr.h - Keytable for videomate_tv_pvr Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct ir_scancode videomate_tv_pvr[] = { + { 0x14, KEY_MUTE }, + { 0x24, KEY_ZOOM }, + + { 0x01, KEY_DVD }, + { 0x23, KEY_RADIO }, + { 0x00, KEY_TV }, + + { 0x0a, KEY_REWIND }, + { 0x08, KEY_PLAYPAUSE }, + { 0x0f, KEY_FORWARD }, + + { 0x02, KEY_PREVIOUS }, + { 0x07, KEY_STOP }, + { 0x06, KEY_NEXT }, + + { 0x0c, KEY_UP }, + { 0x0e, KEY_DOWN }, + { 0x0b, KEY_LEFT }, + { 0x0d, KEY_RIGHT }, + { 0x11, KEY_OK }, + + { 0x03, KEY_MENU }, + { 0x09, KEY_SETUP }, + { 0x05, KEY_VIDEO }, + { 0x22, KEY_CHANNEL }, + + { 0x12, KEY_VOLUMEUP }, + { 0x15, KEY_VOLUMEDOWN }, + { 0x10, KEY_CHANNELUP }, + { 0x13, KEY_CHANNELDOWN }, + + { 0x04, KEY_RECORD }, + + { 0x16, KEY_1 }, + { 0x17, KEY_2 }, + { 0x18, KEY_3 }, + { 0x19, KEY_4 }, + { 0x1a, KEY_5 }, + { 0x1b, KEY_6 }, + { 0x1c, KEY_7 }, + { 0x1d, KEY_8 }, + { 0x1e, KEY_9 }, + { 0x1f, KEY_0 }, + + { 0x20, KEY_LANGUAGE }, + { 0x21, KEY_SLEEP }, +}; + +static struct rc_keymap videomate_tv_pvr_map = { + .map = { + .scan = videomate_tv_pvr, + .size = ARRAY_SIZE(videomate_tv_pvr), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_VIDEOMATE_TV_PVR, + } +}; + +static int __init init_rc_map_videomate_tv_pvr(void) +{ + return ir_register_map(&videomate_tv_pvr_map); +} + +static void __exit exit_rc_map_videomate_tv_pvr(void) +{ + ir_unregister_map(&videomate_tv_pvr_map); +} + +module_init(init_rc_map_videomate_tv_pvr) +module_exit(exit_rc_map_videomate_tv_pvr) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c new file mode 100644 index 00000000000..9d2d550aaa9 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c @@ -0,0 +1,82 @@ +/* winfast-usbii-deluxe.h - Keytable for winfast_usbii_deluxe Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Leadtek Winfast TV USB II Deluxe remote + Magnus Alm <magnus.alm@gmail.com> + */ + +static struct ir_scancode winfast_usbii_deluxe[] = { + { 0x62, KEY_0}, + { 0x75, KEY_1}, + { 0x76, KEY_2}, + { 0x77, KEY_3}, + { 0x79, KEY_4}, + { 0x7a, KEY_5}, + { 0x7b, KEY_6}, + { 0x7d, KEY_7}, + { 0x7e, KEY_8}, + { 0x7f, KEY_9}, + + { 0x38, KEY_CAMERA}, /* SNAPSHOT */ + { 0x37, KEY_RECORD}, /* RECORD */ + { 0x35, KEY_TIME}, /* TIMESHIFT */ + + { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */ + { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */ + { 0x64, KEY_MUTE}, /* MUTE */ + + { 0x21, KEY_CHANNEL}, /* SURF */ + { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */ + { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */ + { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */ + + { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */ + + { 0x70, KEY_POWER2}, /* TV ON/OFF */ + + { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */ + { 0x3a, KEY_NEW}, /* PIP */ + { 0x73, KEY_ZOOM}, /* FULLSECREEN */ + + { 0x66, KEY_INFO}, /* OSD (DISPLAY) */ + + { 0x31, KEY_DOT}, /* '.' */ + { 0x63, KEY_ENTER}, /* ENTER */ + +}; + +static struct rc_keymap winfast_usbii_deluxe_map = { + .map = { + .scan = winfast_usbii_deluxe, + .size = ARRAY_SIZE(winfast_usbii_deluxe), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_WINFAST_USBII_DELUXE, + } +}; + +static int __init init_rc_map_winfast_usbii_deluxe(void) +{ + return ir_register_map(&winfast_usbii_deluxe_map); +} + +static void __exit exit_rc_map_winfast_usbii_deluxe(void) +{ + ir_unregister_map(&winfast_usbii_deluxe_map); +} + +module_init(init_rc_map_winfast_usbii_deluxe) +module_exit(exit_rc_map_winfast_usbii_deluxe) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/keymaps/rc-winfast.c b/drivers/media/IR/keymaps/rc-winfast.c new file mode 100644 index 00000000000..0e90a3bd949 --- /dev/null +++ b/drivers/media/IR/keymaps/rc-winfast.c @@ -0,0 +1,102 @@ +/* winfast.h - Keytable for winfast Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */ + +static struct ir_scancode winfast[] = { + /* Keys 0 to 9 */ + { 0x12, KEY_0 }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + + { 0x00, KEY_POWER }, + { 0x1b, KEY_AUDIO }, /* Audio Source */ + { 0x02, KEY_TUNER }, /* TV/FM, not on Y0400052 */ + { 0x1e, KEY_VIDEO }, /* Video Source */ + { 0x16, KEY_INFO }, /* Display information */ + { 0x04, KEY_VOLUMEUP }, + { 0x08, KEY_VOLUMEDOWN }, + { 0x0c, KEY_CHANNELUP }, + { 0x10, KEY_CHANNELDOWN }, + { 0x03, KEY_ZOOM }, /* fullscreen */ + { 0x1f, KEY_TEXT }, /* closed caption/teletext */ + { 0x20, KEY_SLEEP }, + { 0x29, KEY_CLEAR }, /* boss key */ + { 0x14, KEY_MUTE }, + { 0x2b, KEY_RED }, + { 0x2c, KEY_GREEN }, + { 0x2d, KEY_YELLOW }, + { 0x2e, KEY_BLUE }, + { 0x18, KEY_KPPLUS }, /* fine tune + , not on Y040052 */ + { 0x19, KEY_KPMINUS }, /* fine tune - , not on Y040052 */ + { 0x2a, KEY_MEDIA }, /* PIP (Picture in picture */ + { 0x21, KEY_DOT }, + { 0x13, KEY_ENTER }, + { 0x11, KEY_LAST }, /* Recall (last channel */ + { 0x22, KEY_PREVIOUS }, + { 0x23, KEY_PLAYPAUSE }, + { 0x24, KEY_NEXT }, + { 0x25, KEY_TIME }, /* Time Shifting */ + { 0x26, KEY_STOP }, + { 0x27, KEY_RECORD }, + { 0x28, KEY_SAVE }, /* Screenshot */ + { 0x2f, KEY_MENU }, + { 0x30, KEY_CANCEL }, + { 0x31, KEY_CHANNEL }, /* Channel Surf */ + { 0x32, KEY_SUBTITLE }, + { 0x33, KEY_LANGUAGE }, + { 0x34, KEY_REWIND }, + { 0x35, KEY_FASTFORWARD }, + { 0x36, KEY_TV }, + { 0x37, KEY_RADIO }, /* FM */ + { 0x38, KEY_DVD }, + + { 0x1a, KEY_MODE}, /* change to MCE mode on Y04G0051 */ + { 0x3e, KEY_F21 }, /* MCE +VOL, on Y04G0033 */ + { 0x3a, KEY_F22 }, /* MCE -VOL, on Y04G0033 */ + { 0x3b, KEY_F23 }, /* MCE +CH, on Y04G0033 */ + { 0x3f, KEY_F24 } /* MCE -CH, on Y04G0033 */ +}; + +static struct rc_keymap winfast_map = { + .map = { + .scan = winfast, + .size = ARRAY_SIZE(winfast), + .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_WINFAST, + } +}; + +static int __init init_rc_map_winfast(void) +{ + return ir_register_map(&winfast_map); +} + +static void __exit exit_rc_map_winfast(void) +{ + ir_unregister_map(&winfast_map); +} + +module_init(init_rc_map_winfast) +module_exit(exit_rc_map_winfast) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c new file mode 100644 index 00000000000..46a8f1524b5 --- /dev/null +++ b/drivers/media/IR/rc-map.c @@ -0,0 +1,84 @@ +/* ir-raw-event.c - handle IR Pulse/Space event + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <media/ir-core.h> +#include <linux/spinlock.h> +#include <linux/delay.h> + +/* Used to handle IR raw handler extensions */ +static LIST_HEAD(rc_map_list); +static DEFINE_SPINLOCK(rc_map_lock); + +static struct rc_keymap *seek_rc_map(const char *name) +{ + struct rc_keymap *map = NULL; + + spin_lock(&rc_map_lock); + list_for_each_entry(map, &rc_map_list, list) { + if (!strcmp(name, map->map.name)) { + spin_unlock(&rc_map_lock); + return map; + } + } + spin_unlock(&rc_map_lock); + + return NULL; +} + +struct ir_scancode_table *get_rc_map(const char *name) +{ + + struct rc_keymap *map; + + map = seek_rc_map(name); +#ifdef MODULE + if (!map) { + int rc = request_module(name); + if (rc < 0) { + printk(KERN_ERR "Couldn't load IR keymap %s\n", name); + return NULL; + } + msleep(20); /* Give some time for IR to register */ + + map = seek_rc_map(name); + } +#endif + if (!map) { + printk(KERN_ERR "IR keymap %s not found\n", name); + return NULL; + } + + printk(KERN_INFO "Registered IR keymap %s\n", map->map.name); + + return &map->map; +} +EXPORT_SYMBOL_GPL(get_rc_map); + +int ir_register_map(struct rc_keymap *map) +{ + spin_lock(&rc_map_lock); + list_add_tail(&map->list, &rc_map_list); + spin_unlock(&rc_map_lock); + return 0; +} +EXPORT_SYMBOL_GPL(ir_register_map); + +void ir_unregister_map(struct rc_keymap *map) +{ + spin_lock(&rc_map_lock); + list_del(&map->list); + spin_unlock(&rc_map_lock); +} +EXPORT_SYMBOL_GPL(ir_unregister_map); + |