diff options
Diffstat (limited to 'drivers/media/common/saa7146/saa7146_hlp.c')
| -rw-r--r-- | drivers/media/common/saa7146/saa7146_hlp.c | 1048 |
1 files changed, 1048 insertions, 0 deletions
diff --git a/drivers/media/common/saa7146/saa7146_hlp.c b/drivers/media/common/saa7146/saa7146_hlp.c new file mode 100644 index 00000000000..be746d1aee9 --- /dev/null +++ b/drivers/media/common/saa7146/saa7146_hlp.c @@ -0,0 +1,1048 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/export.h> +#include <media/saa7146_vv.h> + +static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format) +{ + /* clear out the necessary bits */ + *clip_format &= 0x0000ffff; + /* set these bits new */ + *clip_format |= (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16)); +} + +static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl) +{ + *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28); + *hps_ctrl |= (source << 30) | (sync << 28); +} + +static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl) +{ + int hyo = 0, hxo = 0; + + hyo = vv->standard->v_offset; + hxo = vv->standard->h_offset; + + *hps_h_scale &= ~(MASK_B0 | 0xf00); + *hps_h_scale |= (hxo << 0); + + *hps_ctrl &= ~(MASK_W0 | MASK_B2); + *hps_ctrl |= (hyo << 12); +} + +/* helper functions for the calculation of the horizontal- and vertical + scaling registers, clip-format-register etc ... + these functions take pointers to the (most-likely read-out + original-values) and manipulate them according to the requested + changes. +*/ + +/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */ +static struct { + u16 hps_coeff; + u16 weight_sum; +} hps_h_coeff_tab [] = { + {0x00, 2}, {0x02, 4}, {0x00, 4}, {0x06, 8}, {0x02, 8}, + {0x08, 8}, {0x00, 8}, {0x1E, 16}, {0x0E, 8}, {0x26, 8}, + {0x06, 8}, {0x42, 8}, {0x02, 8}, {0x80, 8}, {0x00, 8}, + {0xFE, 16}, {0xFE, 8}, {0x7E, 8}, {0x7E, 8}, {0x3E, 8}, + {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, {0x0E, 8}, {0x0E, 8}, + {0x06, 8}, {0x06, 8}, {0x02, 8}, {0x02, 8}, {0x00, 8}, + {0x00, 8}, {0xFE, 16}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, + {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, + {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, + {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0x7E, 8}, + {0x7E, 8}, {0x3E, 8}, {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, + {0x0E, 8}, {0x0E, 8}, {0x06, 8}, {0x06, 8}, {0x02, 8}, + {0x02, 8}, {0x00, 8}, {0x00, 8}, {0xFE, 16} +}; + +/* table of attenuation values for horizontal scaling */ +static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0}; + +/* calculate horizontal scale registers */ +static int calculate_h_scale_registers(struct saa7146_dev *dev, + int in_x, int out_x, int flip_lr, + u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale) +{ + /* horizontal prescaler */ + u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0; + /* horizontal scaler */ + u32 xim = 0, xp = 0, xsci =0; + /* vertical scale & gain */ + u32 pfuv = 0; + + /* helper variables */ + u32 h_atten = 0, i = 0; + + if ( 0 == out_x ) { + return -EINVAL; + } + + /* mask out vanity-bit */ + *hps_ctrl &= ~MASK_29; + + /* calculate prescale-(xspc)-value: [n .. 1/2) : 1 + [1/2 .. 1/3) : 2 + [1/3 .. 1/4) : 3 + ... */ + if (in_x > out_x) { + xpsc = in_x / out_x; + } + else { + /* zooming */ + xpsc = 1; + } + + /* if flip_lr-bit is set, number of pixels after + horizontal prescaling must be < 384 */ + if ( 0 != flip_lr ) { + + /* set vanity bit */ + *hps_ctrl |= MASK_29; + + while (in_x / xpsc >= 384 ) + xpsc++; + } + /* if zooming is wanted, number of pixels after + horizontal prescaling must be < 768 */ + else { + while ( in_x / xpsc >= 768 ) + xpsc++; + } + + /* maximum prescale is 64 (p.69) */ + if ( xpsc > 64 ) + xpsc = 64; + + /* keep xacm clear*/ + xacm = 0; + + /* set horizontal filter parameters (CXY = CXUV) */ + cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff; + cxuv = cxy; + + /* calculate and set horizontal fine scale (xsci) */ + + /* bypass the horizontal scaler ? */ + if ( (in_x == out_x) && ( 1 == xpsc ) ) + xsci = 0x400; + else + xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc; + + /* set start phase for horizontal fine scale (xp) to 0 */ + xp = 0; + + /* set xim, if we bypass the horizontal scaler */ + if ( 0x400 == xsci ) + xim = 1; + else + xim = 0; + + /* if the prescaler is bypassed, enable horizontal + accumulation mode (xacm) and clear dcgx */ + if( 1 == xpsc ) { + xacm = 1; + dcgx = 0; + } else { + xacm = 0; + /* get best match in the table of attenuations + for horizontal scaling */ + h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum; + + for (i = 0; h_attenuation[i] != 0; i++) { + if (h_attenuation[i] >= h_atten) + break; + } + + dcgx = i; + } + + /* the horizontal scaling increment controls the UV filter + to reduce the bandwidth to improve the display quality, + so set it ... */ + if ( xsci == 0x400) + pfuv = 0x00; + else if ( xsci < 0x600) + pfuv = 0x01; + else if ( xsci < 0x680) + pfuv = 0x11; + else if ( xsci < 0x700) + pfuv = 0x22; + else + pfuv = 0x33; + + + *hps_v_gain &= MASK_W0|MASK_B2; + *hps_v_gain |= (pfuv << 24); + + *hps_h_scale &= ~(MASK_W1 | 0xf000); + *hps_h_scale |= (xim << 31) | (xp << 24) | (xsci << 12); + + *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0); + + return 0; +} + +static struct { + u16 hps_coeff; + u16 weight_sum; +} hps_v_coeff_tab [] = { + {0x0100, 2}, {0x0102, 4}, {0x0300, 4}, {0x0106, 8}, {0x0502, 8}, + {0x0708, 8}, {0x0F00, 8}, {0x011E, 16}, {0x110E, 16}, {0x1926, 16}, + {0x3906, 16}, {0x3D42, 16}, {0x7D02, 16}, {0x7F80, 16}, {0xFF00, 16}, + {0x01FE, 32}, {0x01FE, 32}, {0x817E, 32}, {0x817E, 32}, {0xC13E, 32}, + {0xC13E, 32}, {0xE11E, 32}, {0xE11E, 32}, {0xF10E, 32}, {0xF10E, 32}, + {0xF906, 32}, {0xF906, 32}, {0xFD02, 32}, {0xFD02, 32}, {0xFF00, 32}, + {0xFF00, 32}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, + {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, + {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, + {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x817E, 64}, + {0x817E, 64}, {0xC13E, 64}, {0xC13E, 64}, {0xE11E, 64}, {0xE11E, 64}, + {0xF10E, 64}, {0xF10E, 64}, {0xF906, 64}, {0xF906, 64}, {0xFD02, 64}, + {0xFD02, 64}, {0xFF00, 64}, {0xFF00, 64}, {0x01FE, 128} +}; + +/* table of attenuation values for vertical scaling */ +static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0}; + +/* calculate vertical scale registers */ +static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field, + int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain) +{ + int lpi = 0; + + /* vertical scaling */ + u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0; + /* vertical scale & gain */ + u32 dcgy = 0, cya_cyb = 0; + + /* helper variables */ + u32 v_atten = 0, i = 0; + + /* error, if vertical zooming */ + if ( in_y < out_y ) { + return -EINVAL; + } + + /* linear phase interpolation may be used + if scaling is between 1 and 1/2 (both fields used) + or scaling is between 1/2 and 1/4 (if only one field is used) */ + + if (V4L2_FIELD_HAS_BOTH(field)) { + if( 2*out_y >= in_y) { + lpi = 1; + } + } else if (field == V4L2_FIELD_TOP + || field == V4L2_FIELD_ALTERNATE + || field == V4L2_FIELD_BOTTOM) { + if( 4*out_y >= in_y ) { + lpi = 1; + } + out_y *= 2; + } + if( 0 != lpi ) { + + yacm = 0; + yacl = 0; + cya_cyb = 0x00ff; + + /* calculate scaling increment */ + if ( in_y > out_y ) + ysci = ((1024 * in_y) / (out_y + 1)) - 1024; + else + ysci = 0; + + dcgy = 0; + + /* calculate ype and ypo */ + ype = ysci / 16; + ypo = ype + (ysci / 64); + + } else { + yacm = 1; + + /* calculate scaling increment */ + ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10; + + /* calculate ype and ypo */ + ypo = ype = ((ysci + 15) / 16); + + /* the sequence length interval (yacl) has to be set according + to the prescale value, e.g. [n .. 1/2) : 0 + [1/2 .. 1/3) : 1 + [1/3 .. 1/4) : 2 + ... */ + if ( ysci < 512) { + yacl = 0; + } else { + yacl = ( ysci / (1024 - ysci) ); + } + + /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */ + cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff; + + /* get best match in the table of attenuations for vertical scaling */ + v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum; + + for (i = 0; v_attenuation[i] != 0; i++) { + if (v_attenuation[i] >= v_atten) + break; + } + + dcgy = i; + } + + /* ypo and ype swapped in spec ? */ + *hps_v_scale |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1); + + *hps_v_gain &= ~(MASK_W0|MASK_B2); + *hps_v_gain |= (dcgy << 16) | (cya_cyb << 0); + + return 0; +} + +/* simple bubble-sort algorithm with duplicate elimination */ +static int sort_and_eliminate(u32* values, int* count) +{ + int low = 0, high = 0, top = 0, temp = 0; + int cur = 0, next = 0; + + /* sanity checks */ + if( (0 > *count) || (NULL == values) ) { + return -EINVAL; + } + + /* bubble sort the first @count items of the array @values */ + for( top = *count; top > 0; top--) { + for( low = 0, high = 1; high < top; low++, high++) { + if( values[low] > values[high] ) { + temp = values[low]; + values[low] = values[high]; + values[high] = temp; + } + } + } + + /* remove duplicate items */ + for( cur = 0, next = 1; next < *count; next++) { + if( values[cur] != values[next]) + values[++cur] = values[next]; + } + + *count = cur + 1; + + return 0; +} + +static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh, + struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field) +{ + struct saa7146_vv *vv = dev->vv_data; + __le32 *clipping = vv->d_clipping.cpu_addr; + + int width = vv->ov.win.w.width; + int height = vv->ov.win.w.height; + int clipcount = vv->ov.nclips; + + u32 line_list[32]; + u32 pixel_list[32]; + int numdwords = 0; + + int i = 0, j = 0; + int cnt_line = 0, cnt_pixel = 0; + + int x[32], y[32], w[32], h[32]; + + /* clear out memory */ + memset(&line_list[0], 0x00, sizeof(u32)*32); + memset(&pixel_list[0], 0x00, sizeof(u32)*32); + memset(clipping, 0x00, SAA7146_CLIPPING_MEM); + + /* fill the line and pixel-lists */ + for(i = 0; i < clipcount; i++) { + int l = 0, r = 0, t = 0, b = 0; + + x[i] = vv->ov.clips[i].c.left; + y[i] = vv->ov.clips[i].c.top; + w[i] = vv->ov.clips[i].c.width; + h[i] = vv->ov.clips[i].c.height; + + if( w[i] < 0) { + x[i] += w[i]; w[i] = -w[i]; + } + if( h[i] < 0) { + y[i] += h[i]; h[i] = -h[i]; + } + if( x[i] < 0) { + w[i] += x[i]; x[i] = 0; + } + if( y[i] < 0) { + h[i] += y[i]; y[i] = 0; + } + if( 0 != vv->vflip ) { + y[i] = height - y[i] - h[i]; + } + + l = x[i]; + r = x[i]+w[i]; + t = y[i]; + b = y[i]+h[i]; + + /* insert left/right coordinates */ + pixel_list[ 2*i ] = min_t(int, l, width); + pixel_list[(2*i)+1] = min_t(int, r, width); + /* insert top/bottom coordinates */ + line_list[ 2*i ] = min_t(int, t, height); + line_list[(2*i)+1] = min_t(int, b, height); + } + + /* sort and eliminate lists */ + cnt_line = cnt_pixel = 2*clipcount; + sort_and_eliminate( &pixel_list[0], &cnt_pixel ); + sort_and_eliminate( &line_list[0], &cnt_line ); + + /* calculate the number of used u32s */ + numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2; + numdwords = max_t(int, 4, numdwords); + numdwords = min_t(int, 64, numdwords); + + /* fill up cliptable */ + for(i = 0; i < cnt_pixel; i++) { + clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16); + } + for(i = 0; i < cnt_line; i++) { + clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16); + } + + /* fill up cliptable with the display infos */ + for(j = 0; j < clipcount; j++) { + + for(i = 0; i < cnt_pixel; i++) { + + if( x[j] < 0) + x[j] = 0; + + if( pixel_list[i] < (x[j] + w[j])) { + + if ( pixel_list[i] >= x[j] ) { + clipping[2*i] |= cpu_to_le32(1 << j); + } + } + } + for(i = 0; i < cnt_line; i++) { + + if( y[j] < 0) + y[j] = 0; + + if( line_list[i] < (y[j] + h[j]) ) { + + if( line_list[i] >= y[j] ) { + clipping[(2*i)+1] |= cpu_to_le32(1 << j); + } + } + } + } + + /* adjust arbitration control register */ + *arbtr_ctrl &= 0xffff00ff; + *arbtr_ctrl |= 0x00001c00; + + vdma2->base_even = vv->d_clipping.dma_handle; + vdma2->base_odd = vv->d_clipping.dma_handle; + vdma2->prot_addr = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords)); + vdma2->base_page = 0x04; + vdma2->pitch = 0x00; + vdma2->num_line_byte = (0 << 16 | (sizeof(u32))*(numdwords-1) ); + + /* set clipping-mode. this depends on the field(s) used */ + *clip_format &= 0xfffffff7; + if (V4L2_FIELD_HAS_BOTH(field)) { + *clip_format |= 0x00000008; + } else { + *clip_format |= 0x00000000; + } +} + +/* disable clipping */ +static void saa7146_disable_clipping(struct saa7146_dev *dev) +{ + u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); + + /* mask out relevant bits (=lower word)*/ + clip_format &= MASK_W1; + + /* upload clipping-registers*/ + saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format); + saa7146_write(dev, MC2, (MASK_05 | MASK_21)); + + /* disable video dma2 */ + saa7146_write(dev, MC1, MASK_21); +} + +static void saa7146_set_clipping_rect(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + enum v4l2_field field = vv->ov.win.field; + struct saa7146_video_dma vdma2; + u32 clip_format; + u32 arbtr_ctrl; + + /* check clipcount, disable clipping if clipcount == 0*/ + if (vv->ov.nclips == 0) { + saa7146_disable_clipping(dev); + return; + } + + clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); + arbtr_ctrl = saa7146_read(dev, PCI_BT_V1); + + calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field); + + /* set clipping format */ + clip_format &= 0xffff0008; + clip_format |= (SAA7146_CLIPPING_RECT << 4); + + /* prepare video dma2 */ + saa7146_write(dev, BASE_EVEN2, vdma2.base_even); + saa7146_write(dev, BASE_ODD2, vdma2.base_odd); + saa7146_write(dev, PROT_ADDR2, vdma2.prot_addr); + saa7146_write(dev, BASE_PAGE2, vdma2.base_page); + saa7146_write(dev, PITCH2, vdma2.pitch); + saa7146_write(dev, NUM_LINE_BYTE2, vdma2.num_line_byte); + + /* prepare the rest */ + saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format); + saa7146_write(dev, PCI_BT_V1, arbtr_ctrl); + + /* upload clip_control-register, clipping-registers, enable video dma2 */ + saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19)); + saa7146_write(dev, MC1, (MASK_05 | MASK_21)); +} + +static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field) +{ + struct saa7146_vv *vv = dev->vv_data; + + int source = vv->current_hps_source; + int sync = vv->current_hps_sync; + + u32 hps_v_scale = 0, hps_v_gain = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0; + + /* set vertical scale */ + hps_v_scale = 0; /* all bits get set by the function-call */ + hps_v_gain = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/ + calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain); + + /* set horizontal scale */ + hps_ctrl = 0; + hps_h_prescale = 0; /* all bits get set in the function */ + hps_h_scale = 0; + calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale); + + /* set hyo and hxo */ + calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl); + calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl); + + /* write out new register contents */ + saa7146_write(dev, HPS_V_SCALE, hps_v_scale); + saa7146_write(dev, HPS_V_GAIN, hps_v_gain); + saa7146_write(dev, HPS_CTRL, hps_ctrl); + saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale); + saa7146_write(dev, HPS_H_SCALE, hps_h_scale); + + /* upload shadow-ram registers */ + saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) ); +} + +/* calculate the new memory offsets for a desired position */ +static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat); + + int b_depth = vv->ov_fmt->depth; + int b_bpl = vv->ov_fb.fmt.bytesperline; + /* The unsigned long cast is to remove a 64-bit compile warning since + it looks like a 64-bit address is cast to a 32-bit value, even + though the base pointer is really a 32-bit physical address that + goes into a 32-bit DMA register. + FIXME: might not work on some 64-bit platforms, but see the FIXME + in struct v4l2_framebuffer (videodev2.h) for that. + */ + u32 base = (u32)(unsigned long)vv->ov_fb.base; + + struct saa7146_video_dma vdma1; + + /* calculate memory offsets for picture, look if we shall top-down-flip */ + vdma1.pitch = 2*b_bpl; + if ( 0 == vv->vflip ) { + vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8)); + vdma1.base_odd = vdma1.base_even + (vdma1.pitch / 2); + vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2)); + } + else { + vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8)); + vdma1.base_odd = vdma1.base_even - (vdma1.pitch / 2); + vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2)); + } + + if (V4L2_FIELD_HAS_BOTH(field)) { + } else if (field == V4L2_FIELD_ALTERNATE) { + /* fixme */ + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if (field == V4L2_FIELD_TOP) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if (field == V4L2_FIELD_BOTTOM) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + } + + if ( 0 != vv->vflip ) { + vdma1.pitch *= -1; + } + + vdma1.base_page = sfmt->swap; + vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels; + + saa7146_write_out_dma(dev, 1, &vdma1); +} + +static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette) +{ + u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL); + + /* call helper function */ + calculate_output_format_register(dev,palette,&clip_format); + + /* update the hps registers */ + saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format); + saa7146_write(dev, MC2, (MASK_05 | MASK_21)); +} + +/* select input-source */ +void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync) +{ + struct saa7146_vv *vv = dev->vv_data; + u32 hps_ctrl = 0; + + /* read old state */ + hps_ctrl = saa7146_read(dev, HPS_CTRL); + + hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 ); + hps_ctrl |= (source << 30) | (sync << 28); + + /* write back & upload register */ + saa7146_write(dev, HPS_CTRL, hps_ctrl); + saa7146_write(dev, MC2, (MASK_05 | MASK_21)); + + vv->current_hps_source = source; + vv->current_hps_sync = sync; +} +EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync); + +int saa7146_enable_overlay(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + struct saa7146_vv *vv = dev->vv_data; + + saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field); + saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat); + saa7146_set_output_format(dev, vv->ov_fmt->trans); + saa7146_set_clipping_rect(fh); + + /* enable video dma1 */ + saa7146_write(dev, MC1, (MASK_06 | MASK_22)); + return 0; +} + +void saa7146_disable_overlay(struct saa7146_fh *fh) +{ + struct saa7146_dev *dev = fh->dev; + + /* disable clipping + video dma1 */ + saa7146_disable_clipping(dev); + saa7146_write(dev, MC1, MASK_22); +} + +void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) +{ + int where = 0; + + if( which < 1 || which > 3) { + return; + } + + /* calculate starting address */ + where = (which-1)*0x18; + + saa7146_write(dev, where, vdma->base_odd); + saa7146_write(dev, where+0x04, vdma->base_even); + saa7146_write(dev, where+0x08, vdma->prot_addr); + saa7146_write(dev, where+0x0c, vdma->pitch); + saa7146_write(dev, where+0x10, vdma->base_page); + saa7146_write(dev, where+0x14, vdma->num_line_byte); + + /* upload */ + saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1))); +/* + printk("vdma%d.base_even: 0x%08x\n", which,vdma->base_even); + printk("vdma%d.base_odd: 0x%08x\n", which,vdma->base_odd); + printk("vdma%d.prot_addr: 0x%08x\n", which,vdma->prot_addr); + printk("vdma%d.base_page: 0x%08x\n", which,vdma->base_page); + printk("vdma%d.pitch: 0x%08x\n", which,vdma->pitch); + printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte); +*/ +} + +static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_video_dma vdma1; + + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + + int width = buf->fmt->width; + int height = buf->fmt->height; + int bytesperline = buf->fmt->bytesperline; + enum v4l2_field field = buf->fmt->field; + + int depth = sfmt->depth; + + DEB_CAP("[size=%dx%d,fields=%s]\n", + width, height, v4l2_field_names[field]); + + if( bytesperline != 0) { + vdma1.pitch = bytesperline*2; + } else { + vdma1.pitch = (width*depth*2)/8; + } + vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels); + vdma1.base_page = buf->pt[0].dma | ME1 | sfmt->swap; + + if( 0 != vv->vflip ) { + vdma1.prot_addr = buf->pt[0].offset; + vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height; + vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2); + } else { + vdma1.base_even = buf->pt[0].offset; + vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2); + vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height; + } + + if (V4L2_FIELD_HAS_BOTH(field)) { + } else if (field == V4L2_FIELD_ALTERNATE) { + /* fixme */ + if ( vv->last_field == V4L2_FIELD_TOP ) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + } + } else if (field == V4L2_FIELD_TOP) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + } else if (field == V4L2_FIELD_BOTTOM) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + } + + if( 0 != vv->vflip ) { + vdma1.pitch *= -1; + } + + saa7146_write_out_dma(dev, 1, &vdma1); + return 0; +} + +static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3) +{ + int height = buf->fmt->height; + int width = buf->fmt->width; + + vdma2->pitch = width; + vdma3->pitch = width; + + /* fixme: look at bytesperline! */ + + if( 0 != vv->vflip ) { + vdma2->prot_addr = buf->pt[1].offset; + vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[1].offset; + vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2); + + vdma3->prot_addr = buf->pt[2].offset; + vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[2].offset; + vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2); + } else { + vdma3->base_even = buf->pt[2].offset; + vdma3->base_odd = vdma3->base_even + (vdma3->pitch/2); + vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset; + + vdma2->base_even = buf->pt[1].offset; + vdma2->base_odd = vdma2->base_even + (vdma2->pitch/2); + vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset; + } + + return 0; +} + +static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3) +{ + int height = buf->fmt->height; + int width = buf->fmt->width; + + vdma2->pitch = width/2; + vdma3->pitch = width/2; + + if( 0 != vv->vflip ) { + vdma2->prot_addr = buf->pt[2].offset; + vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[2].offset; + vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2); + + vdma3->prot_addr = buf->pt[1].offset; + vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[1].offset; + vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2); + + } else { + vdma3->base_even = buf->pt[2].offset; + vdma3->base_odd = vdma3->base_even + (vdma3->pitch); + vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset; + + vdma2->base_even = buf->pt[1].offset; + vdma2->base_odd = vdma2->base_even + (vdma2->pitch); + vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset; + } + return 0; +} + +static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf) +{ + struct saa7146_vv *vv = dev->vv_data; + struct saa7146_video_dma vdma1; + struct saa7146_video_dma vdma2; + struct saa7146_video_dma vdma3; + + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + + int width = buf->fmt->width; + int height = buf->fmt->height; + enum v4l2_field field = buf->fmt->field; + + BUG_ON(0 == buf->pt[0].dma); + BUG_ON(0 == buf->pt[1].dma); + BUG_ON(0 == buf->pt[2].dma); + + DEB_CAP("[size=%dx%d,fields=%s]\n", + width, height, v4l2_field_names[field]); + + /* fixme: look at bytesperline! */ + + /* fixme: what happens for user space buffers here?. The offsets are + most likely wrong, this version here only works for page-aligned + buffers, modifications to the pagetable-functions are necessary...*/ + + vdma1.pitch = width*2; + vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels); + vdma1.base_page = buf->pt[0].dma | ME1; + + if( 0 != vv->vflip ) { + vdma1.prot_addr = buf->pt[0].offset; + vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset; + vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2); + } else { + vdma1.base_even = buf->pt[0].offset; + vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2); + vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset; + } + + vdma2.num_line_byte = 0; /* unused */ + vdma2.base_page = buf->pt[1].dma | ME1; + + vdma3.num_line_byte = 0; /* unused */ + vdma3.base_page = buf->pt[2].dma | ME1; + + switch( sfmt->depth ) { + case 12: { + calc_planar_420(vv,buf,&vdma2,&vdma3); + break; + } + case 16: { + calc_planar_422(vv,buf,&vdma2,&vdma3); + break; + } + default: { + return -1; + } + } + + if (V4L2_FIELD_HAS_BOTH(field)) { + } else if (field == V4L2_FIELD_ALTERNATE) { + /* fixme */ + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + vdma2.base_odd = vdma2.prot_addr; + vdma2.pitch /= 2; + vdma3.base_odd = vdma3.prot_addr; + vdma3.pitch /= 2; + } else if (field == V4L2_FIELD_TOP) { + vdma1.base_odd = vdma1.prot_addr; + vdma1.pitch /= 2; + vdma2.base_odd = vdma2.prot_addr; + vdma2.pitch /= 2; + vdma3.base_odd = vdma3.prot_addr; + vdma3.pitch /= 2; + } else if (field == V4L2_FIELD_BOTTOM) { + vdma1.base_odd = vdma1.base_even; + vdma1.base_even = vdma1.prot_addr; + vdma1.pitch /= 2; + vdma2.base_odd = vdma2.base_even; + vdma2.base_even = vdma2.prot_addr; + vdma2.pitch /= 2; + vdma3.base_odd = vdma3.base_even; + vdma3.base_even = vdma3.prot_addr; + vdma3.pitch /= 2; + } + + if( 0 != vv->vflip ) { + vdma1.pitch *= -1; + vdma2.pitch *= -1; + vdma3.pitch *= -1; + } + + saa7146_write_out_dma(dev, 1, &vdma1); + if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) { + saa7146_write_out_dma(dev, 3, &vdma2); + saa7146_write_out_dma(dev, 2, &vdma3); + } else { + saa7146_write_out_dma(dev, 2, &vdma2); + saa7146_write_out_dma(dev, 3, &vdma3); + } + return 0; +} + +static void program_capture_engine(struct saa7146_dev *dev, int planar) +{ + struct saa7146_vv *vv = dev->vv_data; + int count = 0; + + unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B; + unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B; + + /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/ + WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait); + WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait); + + /* set rps register 0 */ + WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4)); + WRITE_RPS0(MASK_27 | MASK_11); + + /* turn on video-dma1 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_06 | MASK_22); /* => mask */ + WRITE_RPS0(MASK_06 | MASK_22); /* => values */ + if( 0 != planar ) { + /* turn on video-dma2 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_05 | MASK_21); /* => mask */ + WRITE_RPS0(MASK_05 | MASK_21); /* => values */ + + /* turn on video-dma3 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_04 | MASK_20); /* => mask */ + WRITE_RPS0(MASK_04 | MASK_20); /* => values */ + } + + /* wait for o_fid_a/b / e_fid_a/b toggle */ + if ( vv->last_field == V4L2_FIELD_INTERLACED ) { + WRITE_RPS0(CMD_PAUSE | o_wait); + WRITE_RPS0(CMD_PAUSE | e_wait); + } else if ( vv->last_field == V4L2_FIELD_TOP ) { + WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09)); + WRITE_RPS0(CMD_PAUSE | o_wait); + } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { + WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09)); + WRITE_RPS0(CMD_PAUSE | e_wait); + } + + /* turn off video-dma1 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_22 | MASK_06); /* => mask */ + WRITE_RPS0(MASK_22); /* => values */ + if( 0 != planar ) { + /* turn off video-dma2 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_05 | MASK_21); /* => mask */ + WRITE_RPS0(MASK_21); /* => values */ + + /* turn off video-dma3 */ + WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4)); + WRITE_RPS0(MASK_04 | MASK_20); /* => mask */ + WRITE_RPS0(MASK_20); /* => values */ + } + + /* generate interrupt */ + WRITE_RPS0(CMD_INTERRUPT); + + /* stop */ + WRITE_RPS0(CMD_STOP); +} + +void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next) +{ + struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat); + struct saa7146_vv *vv = dev->vv_data; + u32 vdma1_prot_addr; + + DEB_CAP("buf:%p, next:%p\n", buf, next); + + vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1); + if( 0 == vdma1_prot_addr ) { + /* clear out beginning of streaming bit (rps register 0)*/ + DEB_CAP("forcing sync to new frame\n"); + saa7146_write(dev, MC2, MASK_27 ); + } + + saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field); + saa7146_set_output_format(dev, sfmt->trans); + saa7146_disable_clipping(dev); + + if ( vv->last_field == V4L2_FIELD_INTERLACED ) { + } else if ( vv->last_field == V4L2_FIELD_TOP ) { + vv->last_field = V4L2_FIELD_BOTTOM; + } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) { + vv->last_field = V4L2_FIELD_TOP; + } + + if( 0 != IS_PLANAR(sfmt->trans)) { + calculate_video_dma_grab_planar(dev, buf); + program_capture_engine(dev,1); + } else { + calculate_video_dma_grab_packed(dev, buf); + program_capture_engine(dev,0); + } + +/* + printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1)); + printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1)); + printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1)); + printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1)); + printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1)); + printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1)); + printk("vdma%d => vptr : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1)); +*/ + + /* write the address of the rps-program */ + saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle); + + /* turn on rps */ + saa7146_write(dev, MC1, (MASK_12 | MASK_28)); +} |