diff options
Diffstat (limited to 'drivers/media/common/tuners/tuner-xc2028.c')
| -rw-r--r-- | drivers/media/common/tuners/tuner-xc2028.c | 25 |
1 files changed, 21 insertions, 4 deletions
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 96d61707f50..b6ce528e188 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -100,6 +100,8 @@ struct xc2028_data { if (size != _rc) \ tuner_info("i2c output error: rc = %d (should be %d)\n",\ _rc, (int)size); \ + if (priv->ctrl.msleep) \ + msleep(priv->ctrl.msleep); \ _rc; \ }) @@ -119,6 +121,8 @@ struct xc2028_data { if (isize != _rc) \ tuner_err("i2c input error: rc = %d (should be %d)\n", \ _rc, (int)isize); \ + if (priv->ctrl.msleep) \ + msleep(priv->ctrl.msleep); \ _rc; \ }) @@ -129,8 +133,8 @@ struct xc2028_data { (_rc = tuner_i2c_xfer_send(&priv->i2c_props, \ _val, sizeof(_val)))) { \ tuner_err("Error on line %d: %d\n", __LINE__, _rc); \ - } else \ - msleep(10); \ + } else if (priv->ctrl.msleep) \ + msleep(priv->ctrl.msleep); \ _rc; \ }) @@ -809,10 +813,20 @@ check_device: hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, (version & 0xf0) >> 4, version & 0xf); + + if (priv->ctrl.read_not_reliable) + goto read_not_reliable; + /* Check firmware version against what we downloaded. */ if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) { - tuner_err("Incorrect readback of firmware version.\n"); - goto fail; + if (!priv->ctrl.read_not_reliable) { + tuner_err("Incorrect readback of firmware version.\n"); + goto fail; + } else { + tuner_err("Returned an incorrect version. However, " + "read is not reliable enough. Ignoring it.\n"); + hwmodel = 3028; + } } /* Check that the tuner hardware model remains consistent over time. */ @@ -826,6 +840,7 @@ check_device: goto fail; } +read_not_reliable: memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw)); /* @@ -996,6 +1011,8 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, The reset CLK is needed only with tm6000. Driver should work fine even if this fails. */ + if (priv->ctrl.msleep) + msleep(priv->ctrl.msleep); do_tuner_callback(fe, XC2028_RESET_CLK, 1); msleep(10); |